Westinghouse 19v1 User's Manual
Contents
1. or keypad button to change the setting of the function To exit the OSD menu or go back to the previous action press the Auto Exit keypad button It automatically will save any changes that have been made Color Temp Selection Language Selection Volume Adjustment Settings Image Adjustment Input Source Selection optional Brightness Contrast Clock Phase H Position V Position Sharpness Audio Current Status Source Resolution amp Frequency Color Temp Status Input Source Status Optional Repeat above steps for changing the setting of other functions The following is a list of the OSD sub menus for the LCD monitor 7 SE UM 1901 0502 OSD Menu Sub Menu Description and Function Image Brightness Adjust the brightness of the screen Contrast Adjust the contrast of the image Clock Adjust the clock pulse of the image Phase Adjust the focus of the image H Position Move the image left and right on the screen V Position Move the image up and down on the screen Sharpness Adjust the picture sharpness of lower resolutions Audio Volume Adjust the audio volume Mute Turn on or off the audio muting Color 9300K Set the color temperature to 9300K white color 7500K Set the color temperature to 7500K white color 6500K Set the color temperature to 6500K white color User Red Adjust red gain User Green Adjust green gain User Blue Adj2. 21 ms Contrast Ratio 600 1 Maximum Brightness 300 Nits Viewing Angles 170 H 170 V Color Saturation 72 TBD Directly wall mountable Wall Arm Mount Physical 100 mm VESAO Input Signal Video HD 15 pin mini D Sub VGA connector Audio 3 5mm Mini Stereo jack male male Speaker Output Built in audio amplifier and speakers 2 5 watts 2 channels Power Voltage 100 240 VAC 50 60 Hz auto switch 1 5A Operating Conditions Temperature 32 F to 95 F 0 C to 35 C Humidity 20 to 90 no condensation Altitude Up to 3 000 meters Storage Conditions Temperature 4 F to 140 F 20 C to 60 C Humidity 10 to 90 no condensation Altitude Up to 12 000 meters Dimensions Unit 16 4 w x 17 1 h x 9 2 d in Carton 18 2 w x 18 4 h x 6 d in Weight Unit 10 4 Ib 3 8 kg Regulations FCC B UL CSA CUL Energy Star Plug 8 Play Power consumption DC On lt 73W Blue LED DC Off lt 3W LED OFF Lamp Life 40 000 hours 11 SE UM 1901 0502 Troubleshooting No Power e Make sure the DC cord is plugged into the back of the LCD monitor e Make sure the AC power cord is securely connected to the AC socket e Plug another electrical device like a radio to the power outlet to verify that the outlet is supplying the proper voltage No Image e Make sure the power button is ON e Check whether the LCD monitor and computer power cords are plugged in and check the power supply Power
3. re Macro tA Mere N Bere AAE ade 12 Nod Mi A ooo o ds 12 Power is ON but No Screen Image cainnean nono noon crono a ea EE E n nro S EEE aaa 12 QUERAIS A OEA nata as 12 FUZZY TMA GO ee tencia oil ciente lla cats bete del 12 Image Too Bright or Too Dark ii a e 12 Distorted Mir A AL onde tee ala cet 12 Image is Not Centered size is not scaled Correctly cccccccccssccessesssesseceeseeseeceseeeeeceeseesteeetesenesenees 12 Colors are Not Correct AA 12 ING SOUL A Late E I E aaa ea ec eee AEA E oa a ts a ee E casa Da dE ee RE 12 Mounting the LCD Monitor on a Wall cccccsscccssesseesseesseessecesecesseceeeceseceseceseecaeseseeeseeenseseseeeaees 13 Additional Questions ini a A onda sab cadehics ov ase de Cebe adas 13 1 SE UM 1901 0502 IMPORTANT PRODUCT SAFETY INSTRUCTIONS Read carefully and follow all warnings and instructions in this User s Manual and those marked on the product before you use the monitor Failing to follow these warnings can result in personal injury or damage to the monitor Keep this User s Manual in a convenient location for future reference Important Save the original box and all packing material for future shipping needs Proper Handling of the Monitor Always handle your LCD monitor with care Avoid touching the LCD screen Skin oils are difficult to remove Always position the LCD monitor on a stable and level surface Unstable surfaces can cause the monitor to topple and fall resulting in possible da
4. 5555 or write us at service westinghousedigital com 2004 Westinghouse Digital Electronics LLC All rights reserved Specifications subject to change without notice Westinghouse and You can be sure if it s Westinghouse are 13 trademarks of Westinghouse Electric Corporation and are used under license SE UM 1901 0502 Westinghouse Digital Electronics www westinghousedigital com SE UM 1901 0502 City of Industry CA
5. USER S MANUAL 19 LCD Monitor model LCM 19v1 W Westinghouse Table of Contents IMPORTANT PRODUCT SAFETY INSTRUCTIONS ccccccsccssssssssscccssssssccssseccsssssesscssessessssseees 2 CLEANING THE LCD MONITOR cccccessssssccccececsssssssssecccsssesssssssecccesceessssssusecseseccesssssaseceeseceesesnnaaeceess 4 SAFETY GUIDELINES 225007 0 ithe o Oa 5 ECCCOMPLIANCE STATEMEN DT a iaa 5 INSTALLATION eiiieaen aAa S Eaa iaae aa 6 1 ATTACHING THE BASE STAND TO THE LCD MONITOR ccccccceceeeseeeseeeceescesscesesceesceescesseseseseseeesess 6 2 CONNECT VGA ANDAUDIO GABLES iia a a oaa ea ae isis seem 6 3 CONNECT THE POWER CABLE ccccsssssssssssssssssscssssssscssscssscssscsssscssscssssssscssscssssssscssssssssssssssessssees 6 AS CPURN THE PO WERO Nr 6 OSD MENU FUNCTIONS neira SS AEE a S 7 OSD MENUS a a a a E E sit tas heel ad age ata es sat a A TTA 8 BACKLIGHT CONTROL e eessssooosoesesssssoosossesssssoooooseesssssoocossssssssooooosessssssoocosesssssssoocosessssssoooosessssssso 9 DISPLAY MODES oy scescds dee sot8 it ta td ol ASS de DA dataset 99 IMAGE PROBLEMS issiicissscossscescecaassossveseoctsegsssososssoosessesaspocesesoe0es sapasesesesosgvessavesosesoosesdecgssovesecocossseeeds 10 NO SIGNAL INPUT iaa es 10 OUT OF RANGE A se E EEA 10 APPENDIX A REA 11 SEAE O NT E RAE A TTE I AL AA IAE NE da olle 11 TROUBLESHOOTING iia a a a ies a aa ea adei a aaaeei 12 NO POWCL aS aen etek A e sires Fonds te AA
6. cient airflow and ventilation Increased temperatures may cause fire or device failure 2 SE UM 1901 0502 To assure proper ventilation do not block the openings by placing the product on a bed sofa rug or other similar surface Do not place the product in a built in installation such as a bookcase or enclosed rack unless proper ventilation is provided Other Notices and Precautions Caution Never remove the rear cover There are no user serviceable parts inside The LCD monitor contains high voltage parts You may be seriously injured if you touch them Do not attempt repairs yourself The warranty does not cover repairs or attempted repairs by anyone not authorized by Westinghouse Digital Refer all servicing and repairs to qualified service personnel If the monitor begins to emit smoke an abnormal noise or a strange odor immediately turn it off and unplug the power cord Contact the Westinghouse Service Center If the LCD monitor will not be used for an extended period of time unplug the power cord 3 SE UM 1901 0502 Cleaning the LCD Monitor e MAKE SURE THE LCD MONITOR IS TURNED OFF e NEVER SPRAY OR POUR LIQUID DIRECTLY ONTO THE SCREEN OR CASE To Clean the Screen 1 Wipe the screen with a clean soft lint free cloth This removes dust and other particles 2 If it still is not clean apply a small amount of non ammonia non alcohol based glass cleaner on a clean soft lint free cloth and wipe the screen To Clea
7. d look like Figure A1 below Figure A1 5 1 Figure A2 Oz For the United States and Canada In the United States and Canada the male plug is a NEMA5 15 style Figure A2 UL Listed and CSA Labeled For units that are mounted on a desk or table type SVT or SJT power cords may be used If the monitor is placed on the floor only SJT type cord may be used The power cord must be selected according to the current rating for your unit Please consult the table below for the selection criteria for power cords used in the United States and Canada Cord Type Size of Conductors in Cord Maximum Current Rating of Unit SJT 18 AWG 10 Amps 16 AWG 12 Amps 14 AWG 12 Amps SVT 18 AWG 10 Amps 17 AWG 12 Amps FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to tr
8. is ON but No Screen Image e _ Adjust the brightness and contrast levels e Make sure the VGA cable is securely connected to both the computer and monitor Out Of Range e Check the computer image output resolution and frequency and compare the value with the preset values of the computer s graphics card Fuzzy Image e Adjust the Phase setting on the monitor Image Too Bright or Too Dark Adjust the brightness and contrast levels using the OSD Make sure that the computer is not displaying an irregular image Check the VGA connection between the computer and LCD monitor Perform Auto Adjust Distorted Image e Reset the LCD monitor by performing the Recall function using the OSD e Remove extra accessories such as a VGA extension cord Image is Not Centered size is not scaled correctly e Perform Auto Adjust e Adjust the horizontal and or vertical position using the OSD e Check image size setting Colors are Not Correct e Adjust the color setting using the OSD No Sound e Check the audio connection 12 SE UM 1901 0502 Mounting the LCD Monitor on a Wall e Check the Westinghouse Digital website for wall mounting solutions e Use the 100 mm VESA hole pattern to secure a mounting plate to the LCD monitor e Use professional installation to reduce the risk of injury and damage Additional Questions e See our website at www westinghousedigital com e Contact Westinghouse Digital Customer Service at 866 287
9. le to the connector labeled AUDIO IN from the back panel of the LCD monitor to your PC 3 Connect Power Cables Connect the DC power adapter cord to the LCD Monitor to the connector labeled DC IN and then connect the female AC power cord to the adapter Plug the AC power cord into a properly grounded AC outlet 4 Turn the Power On Press the power button on the front of the LCD monitor The LED light will turn green if a signal input is detected or it will be orange if no input is detected Auto Adjust Although a computer can detect the new monitor with the built in VESA Plug amp Play feature the Auto Adjust function can be used to enhance the display To perform the Auto Adjust 6 SE UM 1901 0502 OSD Menu Functions All the function settings for the LCD monitor are controlled via the control keys located on the bottom part of the front panel To display the OSD main menu press the Menu keypad button on the control keys Note The OSD menu display will disappear automatically after approximately 10 seconds if no action is taken The LCD monitor has been adjusted to optimal settings before shipment Adjustments to the monitor settings can be made using the OSD menu Press the Menu keypad button to display the OSD menu Press the or keypad button to select the function to be adjusted Press the Menu keypad button to enter the OSD sub menu to be adjusted Press the
10. mage or injury Avoid exposing the monitor to direct sunlight or high temperatures which can damage or shorten its useful life Do not place near heat sources such as radiators heat registers or other appliances that generate heat Orient the monitor away from direct sunlight to reduce glare Avoid exposing the monitor to rain water moisture or high humidity Do not place it near basins or sinks where it may come in contact with water Never place heavy or sharp objects on the LCD monitor video cable or power cord Overloading Outlets Do not overload electrical power sources when installing the LCD monitor Overloading wall outlets circuits or extension cords can result in overheating fire or electric shock Use only grounded or polarized outlets Power Cord Protection Minimize wear on the power supply cord The power supply cord should be routed away from foot traffic and contact with other objects Do not route the power cord under rugs or carpeting The cord should never be severely bent pinched or twisted Periodically inspect the power cord and each end of the cord for wear or damage Unplug and replace the cord if it is damaged Ventilation Slots and openings on the cabinet are provided for ventilation purposes To ensure reliable operation of the product and to protect it from overheating these openings must not be blocked or covered Keep the LCD monitor a minimum of four 4 inches away from any wall to assure suffi
11. n the Case 1 Use a soft dry cloth 2 If it still is not clean apply a small amount of non ammonia non alcohol based mild non abrasive detergent on a clean soft lint free cloth then wipe the surface Disclaimer Westinghouse Digital does not recommend the use of any ammonia or alcohol based cleaners on the LCD screen or case Some chemical cleaners have been reported to damage the screen and or LCD display case Westinghouse Digital will not be liable for damage resulting from use of any ammonia or alcohol based cleaners 4 SE UM 1901 0502 Safety Guidelines Warning This device must be operated with the original power supply part number ADP 60CF A CAUTION The power supply outlet should be located near the equipment and should be easily accessible Use a power cable that is properly grounded Always use the appropriate AC cord that is certified for the individual country Some examples are listed below USA eiss UL Switzerland SEV Canada CSA Britain BASE BS Germany VDE Japan AO Electric Appliance Control Act IMPORTANT NOTICE CONCERNING POWER CORD SELECTION The power cord set for this unit is enclosed and has been selected according to the country of destination and must be used to prevent electric shock Use the following guidelines if it is necessary to replace the original cord or it is not enclosed The female receptacle of the cord set must meet IEC 60320 requirements and shoul
12. ust blue gain Language English Select the OSD language Frangais Italiano Deutsch Espanol AAG IER Settings OSD Timeout Adjust the OSD display time setting OSD Position Move the OSD display position to any one of the following 5 positions within the overall screen Auto Setting Adjust clock phase and positions automatically Recall Restore factory settings Input Source Analog Select Analog input source VAYA SE UM 1901 0502 Backlight Control Display Modes The monitor backlighting can be controlled by using the Turbo button on the control keypad There are 3 modes Economy Text and Picture To toggle between these modes press the Turbo key until the mode you desire is selected These modes automatically change the backlighting levels between bright brighter and brightest Economy Text Mode Picture Mode 9 SE UM 1901 0502 Image Problem No Signal Input If there is no source connected to the monitor the following error message will be displayed No Signal Input Out of Range If the monitor settings are not compatible with the PC or out of range of the LCD monitor the following error message will be displayed Out of Range H 43 2KHz DA 1 Max 1824Xx768 iso DN 10 SE UM 1901 0502 Appendix Specifications Panel Size Type 19 Color TFT Active Matrix LCD Anti static and hard coated Optimum Resolution 1280 x 1024 Response Time
13. y to correct the interference by one or more of the following measures e Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced technician for help FCC Warning To assure continued FCC compliance the user must use grounded power supply cord and the provided shielded cables Any unauthorized changes or modifications not expressly approved by Westinghouse Digital for compliance could void the user s authority to operate this device 5 SE UM 1901 0502 Installation Congratulations on your purchase of a Westinghouse 19 LCD Monitor Sleek and practical this lightweight and wall mountable LCD monitor delivers a crisp and clear display optimized for 1280 x 1024 display resolution Package Contents e LCD Monitor 19 e Detachable Base Stand e Cables o DC Power Supply Adapter o AC Power Adapter Cord o VGA HD15 Male Male Cable o 3 5mm Male Male Stereo Audio Cable e Literature o User s Manual o Warranty Card 1 Attaching the Base Stand to the LCD Monitor Attach the base stand to the LCD monitor stand neck Align the holes and tabs press in and snap into place To remove the base stand press the tabs on the bottom of the stand neck and remove the base 2 Connect the VGA and Audio Cables Connect a VGA cable to the connector labeled D SUB and an audio cab
Download Pdf Manuals
Related Search