VTech QW2432 User's Manual
Contents
1. GB When finished press SAVE If there is space available in memory the number name will be saved and the Handset will return to idle mode If the memory is full the Handset will display PHONEBOOK IS FULL and exit to the idle screen without saving the entry 21 MEM Memory To Search For and Dial a Number Name Starting from the idle screen press the MEM softkey to review memory contents Using the B D softkeys scroll through the memory contents in alphabetical order Or you can press the FIND softkey enter the first few chararcters of the name and then press FIND to search Ifyou make a mistake press CLR softkey The closest match in alphabetical order will be displayed Once you find the entry you want simply press ON or HANDSFREE to dial the number To Delete a Number Name Using the steps from 1 to 3 in To Search For and Dial a Number Name locate the entry you want to delete Press the EDIT softkey The Handset will display 22 MEM Memory Press the DEL softkey The Handset will display To delete the displayed records press THIS To delete all records press ALL To confirm the deletion of ALL records press YES To exit without deleting press NO To Edit a Name or a Number Using the steps from 1 to 3 in To Search For and Dial a Number Name locate the entry you want to edit Press the EDIT softkey twice T2. Avoid using a telephone other than a cordless type during an electrical storm There may be a remote risk of electric shock from lighting Do not use the telephone to report a gas leak in the vicinity of the leak SAVE THESE INSTRUCTIONS Introduction The QW2432 is an advanced cordless telephone that operates in the 2 4GHz frequency range Your QW2432 is capable of supporting up to a maximum of 4 Handsets Using additional Handsets up to three people can be conferenced on a call 2 Handsets and the Base Speakerphone or two extensions can be conferenced on a call while two other extensions can be talking internally using the Intercom feature This manual is designed to familiarize you with the QW2432 cordless telephone To order additional Handsets model QW2422 or headsets call Qwest at 800 244 1111 IMPORTANT Please record the Base ID BS ID printed on the underside of the 2432 Base in the space below Please be certain to include all 15 digits characters Base ID Parts Check List PoONs Base Unit Handset AC Power Adapter Telephone Cord Battery Pack Wall Mounting Bracket Belt Clip Owner s Manual o N gi Belt Clip Battery Pack a AC Power Adapter Wall Mounting Bracket p OWNER S MANUAL LY Telephone Line Cord Owner s Manual The Handset Layout ONO go Fe YS Antenna Message Wai
3. tone and the Power and Line In Use LEDs will flash rapidly Press the volume up and down keys QS to adjust the Base Ringer volume After each press of the volume keys the Base will emit the selected Ringer and volume setting for one second To turn the Base ringer OFF press the volume down key E until no ringer preview is played To save the Ringer Volume selection and exit press To exit without saving press 24 24 Handset and Base Operation Making Calls From the Handset cP Press ON or HANDSFREE to use the Handset Speakerphone feature Dial the phone number OR Dial the phone number first then press ON or HANDSFREE Press OFF to end your call ke J Answering Calls PARLE EEE Men From the Handset PS Press any key except OFF and the softkey Press OFF to end your call Making Calls From the Base Unit SPEAKERPHONE Press SPEAKERPHONE Dial the phone number Press SPEAKERPHONE to end your call Answering Calls From the Base Unit Redial from Base Unit SPEAKERPHONE ae e Press SPEAKERPHONE e Press SPEAKERPHONE to end your call Pressing REDIAL will immediately dial the last number in the base unit redial memory ry Hold down the REDIAL key for more than 2 seconds to erase the contents in redial memory This is to prevent the accidental dialing of the number stored in redial memory 25 Handset and Base Operatio
4. completely dead the LCD is completely clear and does not activate when you press the keys CAUTION TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS BY BATTERY READ AND FOLLOW THESE INSTRUCTIONS 1 Use only the approprlate type and size battery pack specified in the instruction manual provided for this product 2 Do not dispose of the battery pack in a fire The cell may explode Check with State and local codes for possible special disposal instructions 3 Do not open or mutilate the battery pack Released electrolyte is corrosive and may cause damage to the eyes or skin It may be toxic if swallowed 4 Exercise care in handling battery in order not to short the battery with conducting materials such as rings bracelets and keys The battery or conductor may overheat and cause burns 5 Charge the battery pack provided with or identified for use with this product only in accordance with the instructions and limitations specified in the instruction manual 6 Observe proper polarity orientation between the battery pack and battery charger 10 10 Wall Mounting The Wall Mount bracket is designed for use on standard Wall Mount plates only 1 11 Line up the tabs on the wall mount adapter with the holes on the back of the base unit Snap the wall mount br
5. dial the number you can simply press the ON or HANDSFREE key MENU With the Handset in the idle OFF mode press the MENU key to access the following options e CALLS LOG CALLER ID HANDSET SETTINGS e RANGER EXTENDER e REGISTER Use the B Gp scroll keys to select the desired option then press OK Calls Log Caller ID From the idle OFF mode press MENU use the B GB scroll keys to select CALLS LOG then press OK The Caller ID information of the most recently received call will be displayed To scroll to other records use the ED scroll keys To dial the number displayed you can simply press the ON or HANDSFREE key You can also press the CID key to access the following options DEL OPT SAVE DEL Select this option to delete THIS or ALL records in Caller ID memory OPT Select this option to display up to four possible dialing strings of the number stored in Caller ID memory If a number is provided in the Caller ID data the possible options to choose from will be either 7 8 10 or 11 digits For example if the original number in Caller ID menory was 808 880 8808 then the display options will be Use the UP and DOWN keys to make selection and then press DIAL ON or HANDSFREE to dial the number SAVE Select this option to save the displayed Caller ID record into Speed Dial Memory Only Caller ID records with telephone numbers can be saved into Speed Dial Memory If you n
6. of devices you may connect to your telephone line and still enable the devices to ring when you receive a call The general rule is that the REN value should not exceed 5 0A total however contact your local telephone company for the specific number in your area 38 38 Technical Specifications FREQUENCY CONTROL Crystal controlled PLL synthesizer TRANSMIT FREQUENCY 2401 056 2482 272 MHz RECEIVE FREQUENCY 2401 056 2482 272 MHz CHANNELS 95 Channels NOMINAL EFFECTIVE RANGE Maximum power allowed by FCC Actual operating range may vary according to environmental conditions at the time of use SIZE Handset 48mm x 33mm x 175mm Base 170mm x 115mm x 60mm WEIGHT Handset 170 grams Base 348 grams POWER REQUIREMENTS Handset 800mAh NiCd Battery Pack or 1500mAh NiMH Battery Pack Base 7 VDC 900mA MEMORY Speed Dial 50 Memory locations into 32 digits per location CID Alpha Numeric Display 50 Memory locations SPECIFICATIONS ARE TYPICAL AND MAY CHANGE WITHOUT NOTICE 39 Additional Information Table Of Contents DAW O ONN Important 3 Safety Instructions Introduction Parts Check List The Handset Layout The Base Unit Layout Getting Started Setu Installation of Battery Pack in Handset Spare Battery Charger Power Backup Function Charging Of Handset Battery Pack Wall Mounting Registration and Operation Basic Operation Handset and B
7. sent without prior Return Authorization WHAT DOES OUR WARRANTY NOT COVER Batteries Damage from misuse neglect or acts of nature lightning floods power surges etc Products with may have been modified or incorporated into other products Products purchased and or operated outside the USA its territories Products serviced by the owner or a service facility not expressly authorized by Qwest Customer Service Products purchased more than 12 months from current date Units purchased in AS IS condition or units purchased as Distressed Merchandise HOW DOES STATE LAW OR PROVINCIAL LAW RELATE TO THIS WARRANTY This warranty gives you specific rights You may also have other rights which vary from state to state 36 36 FCC Regulations This equipment complies with Parts 15 of the Federal Communications Commission FCC rules for the United States It also complies with regulations RSS210 and CS 03 of Industry and Science Canada Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device A label is located on the underside of the Base Unit containing either the FCC registration number and Ringer Equivalence Number REN and Load Number You must upon request provide this information to your local telephone company This equipment is com
8. shorter Register Use this option to register a Handset to the QW2432 Base You can register a total of four Handsets to the QW2432 Base This process is activated automatically whenever a new handset is powered up in range of the QW2432 Base You will be prompted to enter the 15 digit Base ID code printed on the underside of the base unit After entering this code press OK The Handset will display SEARCHING FOR BASE and then FOUND BASE V14 when the process is complete Note Base ID codes are 15 digits long and can include the following characters 0 1 2 3 4 5 6 7 8 9 x or 19 MEM Memory The QW2432 can store up to 50 names numbers in memory Each memory location can hold up to 32 digits and up to 16 characters for the name When prompted to ENTER NAME use the digit keys to spell the name Each press of a particular key causes characters to be displayed in the following order Number Key Characters in order FE IO CO o IN or oo Po 20 MEM Memory To Store a Number Name 20 Starting from the idle screen enter the number you want to store in memory Be sure to include long distance codes and pauses using the PAUSE softkey if necessary Press the MEM softkey You will then be prompted to ENTER NAME Use the digit keys to spell the name If you make a mistake press the CLR softkey To enter a space press
9. will cause all Handsets linked with this Base to ring Each Handset will display GLOBAL CALL FROM BASE Any Handset can then answer the PAGE andenter INTERCOM mode with the Base by pressing the INTERCOM key To end an intercom call press OFF on the Handset or PAGE INTERCOM on the Base Press the Base PAGE INTERCOM key then press the number of the Handset you want to call e g INTERCOM 2 Handset 2 can then answer the intercom call by pressing INTERCOM key To end an intercom call press OFF on the Handset or PAGE INTERCOM on the Base From Handset to Base Press the INTERCOM key followed by 0 The Base will ring once and then automatically enter INTERCOM mode To end an intercom call press OFF on the Handset or PAGE INTERCOM on the Base From Handset to Handset e Press the INTERCOM key followed by the number of the other Handset you wish to call e g INTERCOM 3 Handset 3 can then answer the intercom call by pressing the INTERCOM key To end the intercom call press OFF on either Handset All Call from Handset Press the INTERCOM key followed by the All registered Handsets and the Base will ring Any Handset or the Base can answer by pressing INTERCOM To end the intercom call press OFF on Handset or press PAGE INTERCOM on Base 27 Advanced Operations Advanced Operations Handset and Base Operation Handsfree Speakerphone Ope
10. Important Safety Instructions When using your telephone equipment basic safety precautions should always be followed to reduce the risk of fire electric shock and injury to persons including the following 1 2 3 10 11 Read and understand all instructions Follow all warnings and instructions marked on the product Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning Do not use this product near water for example near a bath tub kitchen sink or swimming pool Do not place this product on an unstable cart stand or table The product may fall causing serious damage to the product Slots and openings in the cabinet and the back or bottom are provided for ventilation To protect it from overheating these openings must not be blocked by placing the product on the bed sofa rug or other similar surface This product should never be placed near or over a radiator or heat register This product should not be placed in a built in installation where proper ventilation is not provided This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your dealer or local power company Do not allow anything to rest on the power cord Do not locate this product where the cord will be abused by persons walking on it Never push object
11. TV technician for help 37 Additional E Additional Information FCC Regulations FCC Part 68 The FCC requires that you connect your cordless telephone to the nationwide telephone network through a modular telephone jack USOC RJ11C RJ11W or RJ14 Your telephone company may discontinue your service if your equipment causes harm to the telephone network They will notify you in advance of disconnection if possible During notification you will be informed of your right to file a complaint with the FCC Occasionally your telephone company may make changes in its facilities equipment operation or procedures that could affect the operation of your equipment If so you will be given advance notice of the change to give you an opportunity to maintain uninterrupted service The Base Unit contains no user serviceable parts The Handset contains a user replaceable battery pack If it is determined that your telephone equipment is malfunctioning the FCC requires that it not be used and that it be unplugged from the modular jack until the problem has been corrected Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents or by others who may be authorized by the FCC For repair procedures follow the instructions outlined under the Limited Warranty This equipment may not be used on coin service provided by the phone company or Party Lines The REN is useful in determining the number
12. acket firmly in place Plug the AC adapter into an electrical outlet and the DC connector to the back of the base unit If the handset battery pack has notbeen charged previously place the handset in the base unit cradle and allow it to charge for 12 hours Connect the telephone line cord to the jack on the back of the base unit and the other end to the wall jack Mount the base unit on the wall Position the base unit so the mounting studs will fit into the holes on the wall mount bracket Slide base unit down on the mounting studs until it locks into place Registration and Operation Registration and Operation of the QW2422 Accessory Handset Your QW2432 system can operate up to 4 Handsets The accessory Handset consists of the following Handset Belt Clip Battery Pack Charger Unit Setup of the QW2422 Accessory Handset 1 Plug the AC power adapter into an electrical outlet 2 Remove the Handset battery cover by pressing on the indent and sliding downward 3 Place the new battery pack in the Handset with the metal contacts aligned with the charge contacts in the battery compartment 4 Replace the battery cover by sliding it upward 5 Place the Handset in the Charge Cradle and allow it to charge for 12 hours After the initial charge a maintenance charge of 8 hours should be sufficient Registration and Operation Enter Base ID Cod
13. as follows In an elevated location in the center of the room with no obstructions nearby In a location that is away from other electrical appliances such as microwave ovens personal computers or televisions Installation of Battery Pack in Handset Follow the steps below 1 Remove the battery cover by pressing onthe indent and sliding downward 2 Place the new battery pack in the handset with the metal contacts aligned with the charge contacts in the battery compartment 3 Replace the battery cover by sliding it upwards 4 If the new battery pack is not already charged place the handset in the base unit or a remote charging stand and allow it to charge for 12 hours After initial charge a maintenance charge of 8 hours should be sufficient The original Handset that is shipped with your QW2432 system will be automatically registered to the Base This Handset is HANDSET 1 As you register additional Handsets to the system they will be assigned extension numbers in the following order HANDSET 2 HANDSET 3 and finally HANDSET 4 Whenever a Handset battery pack is installed the Handset will automatically begin SEARCHING FOR BASE if previously registered or it will prompt you to ENTER BASE ID to register the new Handset Spare Battery Charger Power Backup Function The QW2432 can use a the spare battery in the Base Unit to provide operational backup in the event of a power failure Wit
14. ase Indicators Soft Menu Functions RDL Redial MENU Calls Log Caller ID Handset Settings Register MEM Memory To Store a Number Name To Search For and Dial a Number Name To delete a Number Name To Edit a Name or a Number Base Setting Advanced Operations Handsfree and Base Operation Making Calls Answering Calls Redial from Base Unit Mute Function Hold Function Flash Function Volume Control Page Intercom Handsfree Speakerphone Operation Base Speakerphone Operation Line in Use Indication Low Battery Indication Message Waiting Indication Conference Calling Transferring Calls Additional Information Network service Features Headset Operation Maintenance In Case Of Difficulty Warranty Statement FCC Regulations Technical Specifications 91 5366 10 00 ISSUE 0
15. can be damaged if it gets wet Do not use the Handset outdoors in the rain or handle it with wet hands Do not install your Base Unit near a sink bathtub or shower Electrical storms Electrical storms can sometimes cause power surges harmful to electronic equipment For your own safety use caution when using electric appliances during storms Cleaning your telephone Your telephone has a durable plastic casing that should retain its luster for many years Clean it only with a soft cloth slightly dampened with water or a mild soap Do not use excess water or cleaning solvents of any kind Remember that electrical appliances can cause serious injury if used when you are wet or standing in water If your Base Unit should fall into water DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL Then pull the unit out by the unplugged cords 33 Additional Information Additional Information In Case Of Difficulty If you have difficulty operating your phone the suggestions below should solve the problem If you still have difficulty after trying these suggestions call the Customer Service at 800 651 6791 The Phone Doesn t Work At All Make sure the Power Cord is plugged in Make sure the telephone line cord is plugged firmly into the Base Unit and the telephone wall jack Make sure the batteries are properly charged If the LOW BATTERY message is shown the battery pac
16. d plug in a regular telephone If you still hear other calls the problem is probably in your wiring or local service Call your local telephone company You Hear Noise In The Handset And None Of The Keys Or Buttons Work Make sure the power cord is plugged in Common Cure For Electronic Equipment If the unit does not seem to be responding normally then try putting the Handset in the cradle If it does not seem to respond do the following in the order listed 1 Disconnect the power to the Base 2 Disconnect the Handset battery and spare battery pack if applicable Wait a few minutes Connect power to the Base Re install the battery pack s Watch for Handset to display then oar w 35 Additional Information Additional Information Warranty Statement WHAT DOES OUR WARRANTY COVERS Any defect in material or workmanship FOR HOW LONG AFTER THE ORIGINAL PURCHASE To the original purchaser only ONE YEAR WHAT WILL WE DO At our option repair or replace your unit WARRANTY RETURNS In the Qwest region call Customer Service for Return Authorization at 800 651 6791 Properly pack your unit Include any cables amp accessories that were originally provided with the product We recommend using the original carton and packing materials Ship the unit following the instructions provided by Qwest Customer Service Qwest assumes no responsibility for units
17. djust the ringer melody or tone Use the B B scroll keys to select from the six available tones Press OK to confirm your selection and return to the Handset Settings menu LOW BATT TONE Select this option to turn the Low Battery warning tone ON or OFF Press the OFF or ON soft keys to make your selection Press OK to confirm your selection and return to the Handset Settings menu When set to ON the Handset will emit a warning tone when a Low Battery condition is detected RANGE TONE Select this option to turn the Out of Range warning tone ON or OFF Press the OFF or ON soft keys to make your selection Press OK to confirm your selection and return to the Handset Settings menu When set to ON the Handset will emit a warning tone whenever the Handset is taken out of range of the Base KEYPAD TONE Select this option to turn the Keypad tones ON or OFF Press the OFF or ON soft keys to make your selection Press OK to confirm your selection and return to the Handset Settings menu When set to ON the Handset will emit a beep whenever a key is pressed CONTRAST Select this option to adjust the contrast level of the Handset display Use the GB GSB scroll keys to make your selection The handset display will automatically adjust as you make your selection Press OK to confirm your selection and return to the Handset Settings menu LANGUAGE Select this option to change the display from English to Spanish Use the ED Gp scr
18. e T After charging the Handset remove it from its Charge Cradle the screen will display 2 Press NEW then enter the 15 digit Base Unit ID code located on the underside of the Base Unit 3 Press OK The Handset will display PLEASE WAIT 4 wait approximately 15 seconds The Handset will display FOUND BASE V14 If the Handset displays BASE BUSY TRY LATER this indicates that the system is in use Wait until the Base Unit is in the idle on hook mode and repeat step 2 to 4 Congratulations You can now enjoy the benefits of your multi Handset system 13 Handset and Base Indicators Handset Icons Description Line In Use indicator On steady with no number next to it when a parallel set is in use On steady with one or more numbers next to it indicating which extensions are using the line For example 12 indicates that Handset 1 and Handset 2 are on an outside call Intercom indicator On steady with the extension numbers currently on an intercom call For example 02 indicates that the Base and Handset 2 are on an intercom call Battery indicator Cycles Low Medium and High when Handset battery is charging Flashes when a low battery condition is detected Mute indicator On steady when the Handset microphone is muted Hold indicator On steady when the line is on hold Handset Registration indicator is displayed when a Handset is eithe
19. eed to modify the number after saving see TO EDIT A NUMBER Caller ID Call Waiting ID Your QW2432 is capable of displaying the name and or number of the party calling before you answer the phone Caller ID It is also capable of displaying Caller ID information in conjunction with a Call Waiting alert signal Call Waiting Caller ID With Call Waiting Caller ID the Caller ID data is displayed so you can decide whether to answer the incoming call or continue with your current conversation NOTES ABOUT CALLER ID amp CALL WAITING CALLER ID These are subscription services provided by most regional telephone service providers You must subscribe to these services to get the benefits of these features If you do not subscribe to Caller ID services you can still use your QW2432 and the other features it offers Due to regional incompatibilities Caller ID information may not be available for every call you receive In addition the calling party may intentionally block their name and phone number from being sent 17 Handset Settings From the Handset Settings menu you can select the following options to modify RINGER VOLUME Select this option to adjust the ringer volume Use the B Gp scroll keys to adjust the volume up or down A Handset will display a graphic indicator of the selected volume setting Press OK to confirm your selection and return to the Handset Settings menu RINGER MELODY Select this option to a
20. h a fully charged battery pack in the spare battery charger you will still be able to place and receive calls from the Handset for up to 5 hours The spare battery pack can also be used to replace a drained handset battery ensuring uninterrupted use A spare battery can be purchased from most retail stores that carry electronic equipment NOTE When using the QW2432 during Power Backup mode audio quality may be compromised due to reduced Power availability 1 Open the spare battery charger by pressing the release button located on the right hand side of the Base Unit A drawer will open to reveal the spare battery compartment 2 Place a battery pack in the drawer with the charge contacts facing up and to the left 3 Push the drawer closed The spare battery takes 24 hours to fully charge a drained battery Charging Of Handset Battery Pack The Handset of your QW2432 cordless telephone is powered by a rechargeable battery pack It charges automatically whenever the Handset is in the Base Unit You should charge the battery pack for 12 hours when you first receive your phone You ll know the battery pack needs charging when The low battery message is displayed The handset seems
21. hen choose NAME or NUM Using the E softkey move the cursor to the character you want to edit and then enter the corrections as needed Press MORE access DEL BACK and PAUSE when edit a name SPACE function When finished press the SAVE softkey To exit without saving press OFF When finished the handset will display the edited entry 23 Base Settings The QW2432 Base unit has several settings that can be adjusted according to your preference and system requirements Select Base Ringer Melody The phone must be off Press the star key three times The Base will emit a happy tone and the Power and Line In Use LEDs will flash rapidly Press the 1 2 3 4 5 or 6 keys to select the Ringer Melody After each key press the Base will emit a 1 second preview of the selected ringer To save the selected ringer and exit press To exit without saving press Select Tone Pulse The phone must be off Press the star key three times The Base will emit a happy tone and the Power and Line In Use LEDs will flash rapidly Press the 7 key to toggle between TONE and PULSE dialing mode The Line In Use LED will toggle ON when TONE is selected and OFF when PULSE is selected To save the TONE PULSE selection and exit press To exit without saving press Select Base Ringer Volume and OFF The phone must be off Press the star key three times The Base will emit a happy
22. k needs charging No Dial Tone First check all the suggestions above If you still don t hear a dial tone disconnect the Base Unit from the telephone jack and connect a different phone If there is no dial tone on that phone either the problem is in your wiring or local service Contact your local telephone company You Get Noise Static Or A Weak Signal Even When You re Near The Base Unit Household appliances plugged into the same circuit as the Base Unit can sometimes cause interference Try moving the appliance or the Base Unit to another outlet You Get Noise Static Or A Weak Signal When You re Away From The Base Unit You may be out of range Either move closer to the Base or relocate the Base Unit The layout of your home may be limiting the range Try moving the Base Unit to another position The Handset Does Not Ring When You Receive A Call Make sure you have the Handset ringer activated To set the ringer see HANDSET SETTINGS and BASE SETTINGS Make sure the telephone line cord is plugged firmly into the Base Unit and the telephone jack Make sure the power cord is plugged in You may be too far from the Base Unit You may have too many extension phones on your telephone line to allow all of them to ring Try unplugging some of the other phones 34 34 In Case Of Difficulty You Hear Other Calls While Using Your Phone Disconnect your Base Unit from the telephone jack an
23. ll Press the INTERCOM key followed by the number of the Handset 1 2 3 4 or Base 0 that you wish to transfer the call to When the other extension answers the call will automatically be connected to the other extension An unanswered call will ring back to the originating Handset Base if not answered within 30 seconds And if still not answered within 30 the call will automatically be end 29 Advanced Advanced Operations Handset and Base Operation Announced Transfer You can perform an announced transfer call and advise another extension of an active call by doing the following steps Handset or Base must be on an active call Place the active call on HOLD Press the INTERCOM key followed by the number of the Handset 1 2 3 4 or Base 0 that you wish to transfer the call to When the other extension answers the intercom call explain they have an active call waiting Either extensions press OFF to end the intercom call The other extension presses ON or HANDSFREE on the Handset or SPEAKERPHONE on the Base to pick up the call on hold 30 30 Network Service Features Additional Base Features CANCEL CALL WAITING will deactivate Call Waiting before placing an important call Press this key before dialing During that call there will be no interruption from Call Waiting After you hang up Call Waiting will be reactivated for your next call 3 WAY CALLING allows you to
24. n Mute Function MUTE During an active call pressing either the MUTE soft key on the Handset or the MUTE key on the Base when in speakerphone mode will disable the microphone Press MUTE key again to return to normal 2 way conversation Hold Function HOLD From the Handset Press the HOLD soft key to place a call on hold To return to the call press the ONor HANDSFREE key From the Base During an active call press the HOLD key to place a call on hold The SPEAKERPHONE LED will flash to indicate a call is on hold To return to the call press either F HOLD or SPEAKERPHONE You can use your QW2432 with services such as Call Waiting Simply press the ON key on the Handset or the FLASH key on the Base when in speakerphone mode to FLASH the line Flash Function Volume Control vom 0 From the Handset During an active call press the gjsoft key then use the E UP and DOWN Qa soft keys to adjust the earpiece volume From the Base During an active call simply press the Volume UP or DOWN keys to adjust the speakerphone volume You will hear a special tone when you reach the highest or lowest setting 26 26 Handset and Base Operation e qvera J E From Base to a particular Handset Page Intercom PAGE INTERCOM From Base to ALL Handsets To page all Handsets from the Base press the PAGE INTERCOM key This
25. oll keys to select language then press OK to confirm your choice 18 18 Range Extender Your QW2432 has an enhanced feature that is designed to improve performance If you are using your QW2432 in an area with excessive interference or you require a moder ate increase in operating range the Range Extender feature can help to improve both the sound quality and range Actual range will depend on your environment To select the Range Extender setting follow the procedure listed below In the idle OFF mode press MENU and use the scroll keys to select RANGE EXTENDER then press OK There are 3 option settings in the RANGE EXTENDER menu 1 Select OFF to disable RANGE EXTENDER 2 Select ON to enable RANGE EXTENDER An E icon will appear in the upper left corner of Handset display indicating that RANGE EXTENDER is ON 3 Select AUTO to allow your QW2432 to automatically monitor the signal strength between the handset and base unit and activate whenever necessary With this option selected your QW2432 may occassionally enable or disable the RANGE EXTENDER feature When RANGE EXTENDER is enabled an E icon will appear in the upper left corner of the Handset display Use the scroll keys to select the desired setting and then press OK to confirm the selection Note When Range Extender mode is enabled your QW2432 will consume more battery power That means the standby and talk time of your Handset will be
26. patible with inductively coupled hearing aids Should you experience trouble with this telephone equipment please contact Customer Service at 800 651 6791 The telephone company may ask you to disconnect this equipment from the line network until the problem has been corrected FCC Part 15 Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment The equipment has been tested and found to comply with part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try and correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet or on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio
27. r not registered or is searching for a Base unit 14 14 Handset LEDs LED Handset and Base Indicators Description Message Waiting Base LEDS LED Flashes to indicate that you have new messages in your voicemail Service must be subscribed to through your local telephone company Description Message Waiting Flashes to indicate that you have new messages in your voicemail Service must be subscribed to through your local telephone company Power Lights when base unit is receiving power from wall outlet Flashes when unit is in Power Backup mode Line In Use Lights when line is being used by a handset of the QW2432 system Flashes when another telephone on the same line parallel extension is in use Flashes following ringing cadence during ringing Charging Lights whenever the handset is placed in the base unit charging cradle Mute Lights when base microphone is muted Speakerphone Flashes when HOLD function is activated Lights when base speakerphone is in use 15 Soft Menu Functions The QW2432 has an advanced design that uses a menu structure and soft keys to access all of the built in features Example of the idle mode display RDL Redial Press RDL to display the last 5 telephone numbers dialed The number on top line is the most recent number dialed Use the QB GSB scroll keys to select the desired number To
28. ration Your QW2432 handset has a built in handsfree speakerphone This feature allows you to stand the Handset upright on a table or desktop and have handsfree conversations For more information refer to MAKING CALLS in HANDSET AND BASE OPERATION Base Speakerphone Operation The Base of your QW2432 is equipped with a full duplex speakerphone This is a very useful feature for handsfree conversations or conference calls at the base unit For more information refer to MAKING CALLS in HANDSET AND BASE OPERATION Line in Use Indication On the Handset When the telephone line is currently being used by a system Handset or the QW2432 Base a status message similar to this will display on idle Handset s When the telephone line is currently being used by a parallel set a telephone device other than the QW2432 onthe same line the phone icon will remain on steadily and EXTENSION IN USE will be displayed On the Base When a system Handset or a QW2432 Base is currently being used the LINE IN USE LED on the base will illuminate steadily When a parallel set is currently being used the LINE IN USE LED on the base will flash Low Battery Indication When a low battery is detected the Battery icon will flash and a warning beep is played The status message LOW BATTERY will also be displayed when the Handset is in idle mode To prevent an unexpected call drop a drained Handset battery should be replaced by a fully cha
29. rged spare battery 28 28 Handset and Base Operation Message Waiting Indication The QW2432 is compatible with optional voicemail service provided by some local telephone companies If you subscribe to this service and you have new unplayed messages in your voicemail a Visual Message Waiting Indicator VMWI signal is transmitted by your local telephone company The QW2432 will detect a VMWI signal and activate a the Message Waiting light on the Base and the Message Waiting light on the Handset After you check your messages the Message Waiting indicators will automatically turn off Please note that whenver new unplayed messages are stored in your voicemail the local Telephone Company will continue to send a VMWI signal Conference Calling The QW2432 is capable of supporting conference calls with up to two registered Handsets and the Base unit To enter a conference call simply access the line with two or more extensions by pressing ON or HANDSFREE on the Handset or SPEAKERPHONE on the Base The phone icon and two or more extension numbers will be displayed in the upper left corner of the Handset Transferring Calls You can transfer calls on the QW2432 system from the Base to Handset Handset to Handset or Handset to Base Blind Transfer You can directly transfer any active call to another system extension without notification by doing the following steps Handset or Base must be on an active ca
30. s of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock Never spill liquid of any kind on the product To reduce the risk of electric shock do not disassemble this product but take it to an authorized service facility Opening or removing cabinet parts other than specified access doors may expose you to dangerous voltages or other risks Incorrect reassembling can cause electric shock when the appliance is subsequently used Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock Important Safety Instructions 12 13 14 Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions A B C D When the power supply cord or plug is damaged or frayed If liquid has been spilled into the product If the product has been exposed to rain or water If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and will often require extensive work by an authorized technician to restore the product to normal operation If the product has been dropped and the cabinet has been damaged If the product exhibits a distinct change in performance
31. talk with 2 separate parties from a single line 1 Call your first party Wait for the first party to answer 2 Press 3 WAY CALLING Wait for dial tone 3 Call your second party 4 After the call is answered press 3 WAY CALLING again MESSAGES dials 98 which is the code to access Qwest Voice Messaging from your home in the Qwest region If you subscribe to Qwest Voice Messaging when you see the Message Waiting Indicator select MESSAGES to listen to your messages Additional Handset Features Press SERVICES on your Handset for access to other popular custom features offered by many telephone companies MESSAGES dials 98 to access Voice Messages 3 WAY CALLING to set up a 3 Way Call CANCEL CALL WT to deactivate Call Waiting for that call LAST CALL RTN dials 69 to get the number of your last incoming call REJECT ANON prevents ringing from callers that blocked Caller ID ACCEPT ANON turns off Anonymous Rejection CONTINUOUS DIAL to redial a number that s busy for up to 30 min CALL FWD ON dials 72 to initiate sequence to set up Call Forwarding CALL FWD OFF turns off Call Forwarding OONOORWND NOTE It is likely that your local telephone company will assess charges to use network service features You should check with your local service provider regarding the custom services that are available in your area and the associated costs for the intentional or unintentional use of network ser
32. ting Indicator Earpiece Headset Jack 2 5mm Scroll Keys On Flash Dialing Key 0 9 Handsfree Speakerphone 10 11 12 13 14 15 LCD Display Select Off Clear Battery Compartment Intercom Services Key Microphone The Base Unit Layout Phone Cord Jack AC Power Jack Message Waiting Indicator Page Intercom Key In Use Indicator Power Indicator Charge Indicator Mute Key Volume Keys Dialing Keys 0 9 Hold Key Flash Key Redial Key Messages Key 3 Way Calling Key Cancel Call Waiting Key Speakerphone Key Charging Contacts Setup Plug the AC power adapter into an electrical outlet and the DC connector into the back of the base unit To telephone socket outlet AC adapter To telephone jack Plug one end of the telephone line cord into the jack on the back of the base unit Plug the other end of this cord into the wall jack Connecting to phone line Checking for dial tone After the battery is charged press ON on the Handset The Phone icon will appear on the handset display and you will hear dial tone If not see In Case of Difficulty Tone Pulse selection See BASE SETTINGS for details caution Use only the Qwest power supply provided with your Qwest Unit IMPORTANT For best performance the QW2432 Should be installed
33. vices Your local telephone company may provide a monthly subscription to an individual service or a package of services that gives you unlimited usage for a small monthly fee 31 Additional as Additional Information Headset Operation Your QW2432 cordless telephone is equipped with a 2 5mm Headset Jack for use with an optional accessory Headset for hands free operation To purchase a Headset call 800 244 1111 Once you have a compatible 2 5mm Headset locate the Headset Jack on the Handset Connect the plug on the Headset cord to the jack on the cordless Handset The plug should fit securely Do not force the connection Operation coocoo A 6006600000 ceccos 32 NOTE Whenever a compatible Headset is connected to the cordless Handset the microphone on the Handset will be muted This is done to limit the effect of background noise Belt Clip The Handset is also equipped with a detachable belt clip Align the pins on the inside edge of the clip with the notches on the sides of the Handset The belt clip should snap securely into place Do not force the connection 32 Maintenance Taking Care Of Your Telephone Your QW2432 cordless telephone contains sophisticated electronic parts so it must be treated with care Avoid rough treatment Place the Handset down gently Save the original packing materials to protect your telephone if you ever need to ship it Avoid water Your telephone
Download Pdf Manuals
Related Search