VocoPro PV-802 User's Manual
Contents
1. Attaching the Speaker Stand Adapters The PV 802 speakers can each be mounted on speaker stands using a VocoPro speaker stand adapter sold separately NOTE These speaker stand adapters are included with the purchase of VocoPro SS 88 speakers stands Contact your local VocoPro dealer to order a pair of VocoPro SS 88 speaker stands Attaching the Adapter to the Speakers NOTE The 4 mounting screws are included with the PV 802 1 Remove the rubber pads covering the screw openings on the bottom of the PV 802 speakers to reveal the holes for the mounting screws Fig A NOTE DO NOT remove the screw that is already on the bottom of the PV 802 main speaker This screw is keeping the internal amp and mixer in place and must not be removed 2 Align the slots on the flat part of the adapter with the holes on the bottom of the PV 802 speaker Fig B 3 Screw in the screws tightly fastening the adapter to the speaker NOTE Make sure the adapter is attached firmly to the speaker MAIN SPEAKER BOTTOM SECOND SPEAKER BOTTOM Mounting on a Speaker Stand Voltage Selector Setting up the Speaker Stands Setup each SS 88 speaker stand by extending the support lefts to a position that is stable and tighten the tension mechanism firmly Each end of the SS 88 pole has a particular diameter fitted for common speakers mounting cavities If the SS 88 pole does NOT fit flush into the mounting adapter on th2. e PV 802 loosen the SS 88 pole and reverse it in the stand and then remount the speaker Mounting the Speaker s Once the adapter is securely attached to the speaker 1 Place the PV 802 on the SS 88 speaker pole 2 Fasten the fastener on the adapter until it is secured tightly 3 Repeat this for the next speaker Switching Voltage The PV 802 has a voltage selector on the rear panel that switches between two voltage settings 115V North America Canada some South America 220V Europe Asia some South America Note The PV 802 comes preset to 115V and will only need to be switched if it is being used in a region that requires 220V To switch the voltage 1 Locate the voltage selector by removing the VOLTAGE SELECT sticker on the rear panel of the powered PV 802 speaker 2 Switch the selector to the proper voltage CAUTION Using the speakers while set to the wrong voltage can result in permanent damage and will void the warranty Make sure you have set the PV 802 to the correct voltage before using Sticker Voltage v1 Selector Voltage Select www vocopro com
Download Pdf Manuals
Related Search