Victorinox Night Vision II User's Manual
Contents
1. Night Vision II timepiece operate off of a separate battery power source than the timepiece movement itself 1 battery cell Batteries for light function are Night Vision Il one 3 volt 2032 Lithium Please use an authorized Victorinox Swiss Army service center in the event either the light module or timepiece battery require replacement BATTERY Worn Batteries should be replaced immediately Substituting interchangeable batteries is not recommended Battery change should be performed by a qualified technician who should also check the condition of the gaskets and the o ring at the same time Battery is not covered by the warranty2. BASIC OPERATING INSTRUCTIONS NIGHT VISION Il THREE HAND ANALOG QUARTZ NOTE Refer to page 4 to determine what type of crown your timepiece has pull out or screw down SETTING THE DATE AND TIME A B Pull out the crown to position 2 Rotate the crown toward vou until the date showing is the dav before the desired setting Pull out the crown to position 3 and rotate toward vou When midnight is reached the date will advance to the desired date Continue to turn the crown until the desired time is set Remember the date advances at 12 00 midnight not 12 00 noon Push in the crown returning it to position 1 The date and time are now set NIGHT VISION Il The Night Vision Il makes use LED Light of Light Emitting Diodes LEDs for its Functions flashlight and soft dial lighting LEDs last longer than conventional incandescent bulbs and are more durable and a energy efficient Please note that the battery life of the lighting functions is significantly reduced with greater use To maximize battery life please turn lighting functions off when not in use Mi cE Crown Luminous hands and markers are activated by external B 7 2 UV lighting er Pusher for Lighting Functions Locator Beacon Function TIME AND DATE To set time and date please refer to instructions for Three Hand Analog Quartz Lighting Functions Night Vision II lui 1 Dial Illumination Mode One quick push of the pusher will a
3. ctivate the soft LED light for 5 seconds The angle of the light directs it to AN reflect off the crvstal for maximum visibilitv of NL the dial and hands 4 2 Extended Light Mode Two quick pushes of the pusher will activate the LED flashlight for 2 minutes Light will automatically deactivate eas or you can turn the light off by pressing the pusher once Pusher Signal Mode Three quick pushes of the pusher will cause the light to strobe for 2 minutes To deactivate press pusher once Intense Signal Mode Holding the pusher for 5 seconds will activate an intensified LED strobe that flashes continuously Intense Signal Mode is brighter than normal Signal Mode flashing To deactivate press pusher for 5 seconds 2 Locator Mode Red LED locator beacon is positioned at the 6 o clock marker and Pusher blinks once every 10 seconds An easy way to find your timepiece Battery End of Life Mode Red LED locator beacon positioned at the 6 o clock marker will flash 3 times every 10 seconds indicating lighting batteries should be changed Your Night Vision Il timepiece has a built in feature to protect battery consumption if the pusher used to operate the LED is accidentally pressed for example in luggage or coat pocket etc If the pusher is pressed for more than 30 consecutive seconds the lighting feature will shut off automatically Batteries for Light Function Night Vision II The lighting modules of your
Download Pdf Manuals
Related Search