Home

Venturer CR3663I User's Manual

1. e Use a soft non abrasive cloth such as a camera lens cloth to clean the LCD screen If it is extremely dirty do not apply the cleaning liquid directly to it Moisten the cleaning cloth with the cleaning solution and wring out thoroughly then clean it and wipe with a dry cloth again A SPECIFICATIONS DC 12V 1 25A EXTERNAL DC SUPPLY BACKUP BATTERIES FOR CLOCK 2x1 5V UM 4 OR AAA SIZE RADIO FREQUENCY AM 520 1710KHz FM 87 5 108 0MHz Design and specifications are subject to change without notice LIMITED WARRANTY VENTURER ELECTRONICS VENTURER makes the following limited warranty This limited warranty extend to the original consumer purchaser and is limited to non commercial use of the product Ninety 90 Day Parts amp Labor Warranty Venturer products purchased in the United States are warranted to be free from defects in materials or workmanship for a period of ninety 90 days from the date of their original retail purchase If the unit fails to conform to this warranty we will service the product using new or refurbished parts and products at VENTURER s sole discretion During a period of ninety 90 days from the effective warranty date VENTURER will provide when needed service labor to repair a manufacturing defect at its designated Service Center To obtain warranty service in the Untied States you must first call our Customer Support Center at 1 866 444 6478 1 800 252 6123 during
2. altered or modified without authorization of VENTURER or to products or parts thereof which have had the serial number removed or changed Out of Warranty In the event your product requires repair after the limited warranty period has expired please contact our Customer Support Center at 1 866 444 6478 1 800 252 6123 or www venturer com Hours Monday Thursday 9 7 Friday 9 5 Saturday 9 12 EST Important You are responsible for any transportation shipping or insurance relative to the return of the product to our Product Returns Center All warranties implied by state law including the implied warranties of merchantability and fitness for a particular purpose are expressly limited to the duration of the limited warranties set forth above With the exception of any warranties implied by state law as hereby limited the foregoing warranty is exclusive and in lieu of all other warranties guarantees agreements and similar obligations of manufacturer or seller with respect to the repair or replacement of any parts In no event shall VENTURER be liable for consequential or incidental damages No person agent distributor dealer or company is authorized to change modify or extend the terms of these warranties in any manner whatsoever The time within action must be commenced to enforce any obligation of VENTURER arising under the warranty or under any statute or law of the United States or any state thereof is hereby limited t
3. e When the unit is going to be left unplugged for a long time remove the batteries to avoid undue battery discharge and unit damage from battery leakage e Do not dispose of battery in a fire battery may explode or leak CAUTION When discarding batteries environmental problems must be considered and local rules or laws governing the disposal of these bateries must be strictly followed VOLUME ADJUSTMENT TO ADJUST THE VOLUME Adjust the VOLUME control to obtain the desired volume FOR PERSONAL LISTENING Connect headphones 3 5mm stereo mini plug to the PHONES jack Adjust the VOLUME control to obtain the desired volume When headphones are connected the speakers are automatically disconnected CLOCK SETTING Setting the clock can only be done in STANDBY mode Press and hold the FUNCTION button until the hour and the minute digits blink Press the HOUR M4 button to adjust the desired hours Press the MIN gt Pl button to adjust the desired minutes Press the FUNCTION button once to confirm PON 12 00 PM NOON time The PM indicator will light up Notes e In RADIO mode press the DISPLAY button on the remote control to shuffle between the current radio station and the current time e In iPod AUX mode the current time is always shown on the display LISTENING TO THE RADIO 1 Press the STANDBY ONQ button to turn the unit on 2 Press the FUNCTION button to FM or AM band 3 Press the I
4. the display The unit will automatically turn off once it counts down the sleep time A Q To clear the preset sleep time keep pressing the SLEEP button until OO is shown The s eep z2 icon disappears TROUBLE SHOOTING GUIDE PROBLEMS CLOCK Clock does not show the correct time Alarm does not come on at the preset time RADIO Poor FM reception ITEMS TO CHECK e There has been an electrical power interruption Reset the clock Is the current time correctly set on the time display Is the alarm time correctly set Make sure FM antenna wire is unwound Electrical interference in your home can cause poor reception Move the unit away from sources of interference especially those with motors and transformers Reposition or turn the main unit for better reception Poor AM reception iPod iPod does not dock properly or does not install properly Remove your iPod from the dock and check for obstruction on the connectors in the dock and on your iPod Make sure you are using the appropriate adaptor for your model of iPod iPod does not respond to the speaker system e Make sure that your iPod is working properly before docking into the unit Please refer to your iPod manual for details MAINTENANCE Cleaning the Unit e Do not use volatile chemicals on this unit Clean by lightly wiping with a soft cloth Cleaning the LCD Screen e Do not touch it with abnormal force or sharp edged hardware
5. to the last station you tuned The clock radio will wake up to Buzzer Radio iPod when alarm timer reaches the preset time and then turns off automatically after 60 minutes TO SET ALARM 2 Setting the alarm for Alarm2 is the same as setting Alarm1 Use the ALARM2 button instead of the ALARM1 button Note If the Alarm1 amp Alarm2 are set to the same time the unit will activate once only TO TURN OFF ALARM 1 Snooze If you want to snooze a few more minutes Pressing the SNOOZE button will deactivate the sound for 9 minutes You can repeat this function as many times as you like within 60 minutes from the preset alarm time To stop alarm sound Press the STANDBY ON button to stop alarm sound Alarm Mode will stay active alarm will activate again in 24 hours TO CHANGE THE ALARM TIME Set the alarm time again TO CANCEL ALARM MODE After setting alarms press and hold the ALARM1 or ALARM2 button for 2 seconds until the Alarm1 or Alarm2 indicator disappears HOUR digits MINUTE digits ALARM1 indicator ALARN2 indicator COND OF BR W NO SLEEP TIMER SETTING The sleep timer automatically turns the unit off after a certain time 1 While the unit is on press the SLEEP button the display will indicate 90 2 Press the SLEEP button repeatedly to select the desired sleep time as below 9 0 80 10 60 50 E PE PE TE After setting a desired sleep time the steer 27 icon will be shown on
6. top of the unit e When the unit is used with an AC power adaptor do not wrap the unit in a cloth blanket etc If you do so the temperature inside and outside the unit may rise considerably resulting in malfunctioning of the unit e f the unit is brought directly from a cold to a warm location or is placed in a very damp room the moisture may condense on the lens inside the unit Should this occur the unit will not operate In this case remove the disc and leave the unit in a warm place for several hours until the moisture evaporates e For the unit to operate at its best it should not be subject to temperatures below 41 F 5 C or above 95 F 35 C LOCATION OF CONTROLS Top view Front view Rear view 17 13 14 15 16 5 6 78 9101112 1 I MEMORY button 8 ALARM1 button 15 Remote Sensor 2 iPod dock 9 SNOOZE PRESET button 16 Right Speaker 3 iPod dock connector 10 ALARM2 button 17 Flap door for dock 4 FUNCTION O button 11 VOLUME buttons 18 Earphone jack 5 STANDBY ON button 12 SLEEP button 19 AUX IN jack 6 HOUR SKIP TUNING I button 13 Left Speaker 20 DC IN jack 7 SKIP TUNING MINP gt Pl button 14 LCD Display 21 FM Antenna REMOTE CONTROL STANDBY ON button Using the Remote Control Correctly ALARM1 button e Point the remote control at the REMOTE SLEEP button SENSOR located on the unit SNOOZE PRESET button e When there is a strong ambient light DISPLAY button source the performance of the infrared M
7. 4 lt or gt gt I button to tune in to a station e Adjust the volume control to obtain the desired volume Searching for a Station Automatically e Press and hold the I lt or gt gt I button until the tuner starts searching for a station then release After tuning into a station the search stops e The search may not stop at a station with a very weak signal Presetting Stations The unit can store a total of 20 stations in memory 10FM 10AM Presetting allows you to tune in to a station directly 1 Tune in to a desired station 2 Press the PII MEMORY button The preset number will blink and the MEM indicator will be shown on the display 3 Press the PRESET SNOOZE button to select the preset number 4 Press the PIl MEMORY button again to store it in memory 5 Repeat steps 1 4 to store other stations Tuning in to a Preset Station 1 Press the PRESET SNOOZE button the preset number and MEM will be shown on the display 2 Press the PRESET SNOOZE button repeatedly to select the preset number for your desired station For Better Reception FM Fully unwind the antenna wire Extend the antenna wire and place it in the position that sounds best Note Do not connect the FM antenna to an outside antenna When the reception is good the STEREO indicator will appear on the display AM Reposition the unit to get better AM reception Note To prevent possible interference to the AM signal please keep a certain dista
8. C adaptor CAUTIONS e Before use ensure the rated voltage of the adaptor matches your local voltage e The supplied AC adaptor is for use with this unit only Do not use it with other equipment e If you are not going to use the unit for a long time disconnect the AC adaptor from the wall outlet e Whenever the AC adaptor is plugged in to a wall outlet electricity is running through the unit even when the power switch is turned off POWER BACK UP DURING POWER INTERRUPTION Open the battery door and insert two 1 5V UM 4 AAA size batteries into the battery compartment Be sure to install two optional 1 5V UM 4 AAA size batteries for the power back up function If the AC power supply is interrupted the batteries supply power to keep the clock operating and the alarm times set e During power interruption the clock function is still maintained The alarm sound will not come on e These batteries are only for clock operation and alarm memory during power interruption You cannot listen to the radio iPod AUX with the batteries WHEN TO REPLACE THE BATTERIES To check the batteries condition unplug the AC adaptor from the wall outlet and plug it in again after a few minutes If the displayed time is incorrect replace the batteries with new ones WARNINGS e Danger of explosion if batteries are incorrectly replaced Replace only with the same or equivalent type e Be sure to install the batteries before unplugging the AC adaptor
9. EMORY I button REMOTE SENSOR may be degraded PRESET EQ button causing unreliable operation FUNCTION button e The recommended maximum effective ALARM2 button distance for remote operation is about 10 44 gt Pl buttons 16 feet 5 meters 11 VOLUME buttons eo oO eh To Change Battery ATTENTION Remove the protective plastic tab before operating the remote control Ee 2 Insert one CR2025 3V size battery Battery Replacement When the battery becomes weak the operating distance of the remote control is greatly reduced and you will need to replace it 1 Open the battery door Note If the remote control is not going to be used for a long time remove the battery to avoid damage caused by battery leakage corrosion WARNINGS e Do not dispose of battery in fire battery may explode or leak e Battery shall not be exposed to excessive heat such as sunshine fire or the like e Danger of explosion would be resulted if battery is incorrectly replaced Replace only with the same or equivalent type of battery CAUTION When discarding batteries environmental problems must be considered and local rules or laws governing the disposal of these batteries must be strictly followed POWER SUPPLY USING THE AC Adaptor Using an AC adaptor which is not supplied with the unit may damage the unit The supplied AC adaptor operates on AC 100V 240V 50 60Hz p To AC outlet To DC IN 12V jack Pantenma A
10. VENTURER Dual Alarm Clock Radio for iPod Model No CR3663i User s Guide SAFETY PRECAUTIONS FCC Information This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician fo
11. nce The AC adaptor cable s length away from the main unit LISTENING TO YOUR iPOD iPod Compatibility The unit works with iPod mini 4GB 6GB iPod nano 1st generation 1GB 2GB 4GB iPod 5th generation video 30GB 60GB 80GB iPod nano 2nd generation 2GB 4GB 8GB iPod classic 80GB 160GB iPod nano 3rd generation video 4GB 8GB and iPod touch 8GB 16GB 32GB Other iPod models and other audio devices are supported through the AUX IN jack on the unit back panel see AUX IN CONNECTION section iPod Dock Adaptor Before connecting your iPod you need to install the appropriate iPod Dock Adaptor in the dock of the unit Four iPod Dock Adaptors are included as shown adi the adaptor is not supplied in the accessory please use the adaptor that comes with your iPod iPod Adaptor No iPod Description Capacity a iPod 5th generation video 30GB iPod classic 0 eee eee 13 Podre srd generaton video 468 808 CO ua oon O f eee Installing the iPod Dock Adaptor 1 Choose the iPod Dock Adaptor that fits your iPod if the adaptor is not supplied in the accessory please use the adaptor that comes with your iPod 2 Lift up the iPod Dock flap door to approximately 90 3 Insert your iPod Dock Adaptor into the dock until it sits firmly in place Removing the iPod Dock Adaptor Remove the Dock Adaptor by gripping the inside with your thumb then lifting out
12. o ninety 90 days from the date of purchase This limitation does not apply to implied warranties arising under state law This warranty gives you specific legal rights and you may also have other rights which may vary from state to state Some states do not allow limitations on how long an implied warranty lasts when an action may be brought or the exclusion or limitation of incidental or consequential damages so the above provisions may not apply to you For more information on other products and services please visit our web site at www venturer com Important Also keep your Bill of Sale as proof of purchase Model NO aananannnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnrnnrnnnnnnna Product name Type of set Serial NO sesawcaasaecedscassaivaverae keno aaaeaacrabuasieniwassenticwaned INVOICE TIO oscacisswsauaevsecetesmisaesviassnpeiinnsawuwasananimmuauarsenas Date purchased Printed in China 811 366391W010
13. other audio devices Listening to the Connected Device 1 Press the FUNCTION button to AUX IN mode and AUX is shown on the display 2 Turn on the audio device you have attached to the AUX IN jack PRESET EQ This system supports a variety of equalizers and sound effects During playback press the PRESET EQ button on the remote control to select a desired music mode Each time the PRESET EQ button is pressed the music mode will be changed to the next one as follows gFE gt roc ROCK gt POP gt cle CLASSIC DUAL ALARM SETTING The unit should be in STANDBY mode to set alarm e The alarm can be set to activate twice a day by setting two different alarm times in ALARM1 and ALARM2 e The unit can be set to Buzzer Radio or iPod alarm To Set Alarm 1 1 Press the ALARM1 button the f1 icon blinks on the display 2 Press the ALARM1 button once again then the 4 icon hour amp minute digits blink on the display Press the HOUR I lt button to adjust the hours Press the MIN gt gt I button to adjust the minutes Press the FUNCTION button to select Buzzer FM AM iPod Adjust the volume control to obtain the desired volume for the Alarm1 Press the ALARM1 button again to confirm The Alarm 1 indicator will light up Note For the Radio Alarm you should tune into your desired radio station before setting alarms the alarm will turn on
14. r help WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment This class B digital apparatus complies with Canadian ICES 003 CAUTION The marking information is located at the bottom of the apparatus Warnings e The AC adaptor is used as disconnect device and it should remain readily operable during intended used In order to disconnect the apparatus from the mains completely the AC adaptor should be disconnected from the mains socket outlet completely e Minimum 10 cm 4 inches distances around the apparatus for sufficient ventilation e Batteries shall not be exposed to excessive heat such as sunshine fire or the like e The ventilation should not be impeded by covering the ventilation openings with items such as newspaper table cloths curtains etc e No naked flame sources such as lighted candles should be placed on the apparatus On Operation Do not turn up the volume while listening to your iPod with no audio signals or very low level inputs If you do so the speakers may be damaged when the peak level of the sound is played On Use Use the unit in moderate climates Never use the unit where it would be subject to Heat sources such as radiators or air ducts Direct sunlight Excessive dust Moisture or rain Mechanical vibration or shock Uneven surface e Do not place any heavy objects on
15. the adaptor using the friction between your thumb and the adaptor Inserting Your iPod 1 Ensure the appropriate iPod Docking Adaptor is installed Start playback 1 Press the STANDBY ON button to turn on the unit 2 Press the FUNCTION button repeatedly until the indicator iPod appears on the display 3 Press the PIl MEMORY button to start playing Notes e The iPod will charge automatically while docked in the cradle e To prevent possible interference to the AM signal please switch off the iPod while the radio is playing Pausing Playback e Press the PIl MEMORY button e To resume playback press the PHI MEMORY button again Skipping to a Another Track e Press thel4 lt 4 button to skip to the beginning of the current track or skip to previous track Press the gt gt I button to skip to the beginning of the next track Locating a Particular Point on a Track e Keep either the l lt or gt gt I button pressed during playback according to the desired direction and release at the desired point Note Please refer to the user s guide that was included with your iPod for more details AUX IN CONNECTION Connecting to AUX IN for other sound sources You can connect audio devices such as your iPod CD players or MP3 players to the unit through the AUX IN jack Use the Line in cable not supplied connect the AUX IN jack on the back panel to the Line Out or Earphone jack of the
16. the hours listed in the box below The determination of service will be made by VENTURER Customer Support PLEASE DO NOT RETURN YOUR UNIT TO VENTURER WITHOUT PRIOR AUTHORIZATION New or remanufactured replacements for defective parts or products will be used for repairs by VENTURER at its designated Service Center for ninety 90 days from the effective warranty date Such replacement parts or products are warranted for an additional ninety 90 days from the date of repair or replacement The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs The customer is responsible for all transportation charges to the service facility Packaging and Shipping Instruction When you send the product to the VENTURER service facility you must use the original carton box and packing material or an equivalent as designated by VENTURER LIMITED WARRANTY Your Responsibility 1 You must retain the original sale receipt to provide proof of purchase 2 These warranties are effective only if the product is purchased and operated in the U S A or Canada 3 Warranties extend only to defects in material or workmanship and do not extend to any product or parts which have been lost or discarded or damage to product or parts caused by misuse accident improper operation or maintenance or use in violation of instructions provided with the product or to product which has been

Venturer CR3663I User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents