Universal Remote Control Remote control HCCUR User's Manual
Contents
1. Dim VOLUME All Lamps On POWER All Modules Off MUTE NOTE You cannot dim or brighten an Appliance Module If the module was off and you press Bright or Dim VOLUME VOLUME this will simply turn the module To THE Home HC Steep Timer The Sleep Timer switches off the chosen modules after the preset time 1 Press and release the button with the House symbol it 2 Press and hold TIMER until the LED indicator lights steadily Release the TIMER button 3 Use the number buttons to enter the module Unit Code for the module to be turned off 4 Press the desired function button e g CHANNEL to turn the module off after the oreset time time required 1 to 99 mins 13 6 Press ENTER to confirm the setting CHANGING THE House Cope The Remote defaults to House Code A and in most cases you will not need to change this unless you are experiencing interference from a neighboring Home Control system 1 Press and release the button with the House symbol it 2 Press and hold SETUP until the LED indicator lights steadily Release Setup button 3 Use the number buttons to enter the number equivalent to the chosen House Code 1 A 2 B 16 4 Press the ENTER button to confirm the House Code The LED turns off NOTE The House Code you choose must match the House Code on the Transceiver and Modules you are using with 142. TROUBLESHOOTING The Transceiver Module doesn t respond to the remote e Check the House Code on the Transceiver Module Is set to A If you have changed the House Code on the remote see p 19 check that it matches the House Code on the module e Press the ON OFF button on the front of the Transceiver to confirm it operates the equipment connected to it The Transceiver Module works but other modules don t respond e Check that the Module has the same House Code as the Transceiver Module e Try plugging the Module into a different outlet NOTE when you use RF Transceiver such as the to control Modules you will be able to control up to 16 Modules E G when you press 1 6 ON you turn on Module number 16 The Remote won t control your Audio Video equipment doesn t work at all e Use manual controls or the original remote control to confirm the equipment is working properly e Be sure you pressed the device key for the device you want to control e Reenter the code for your A V product from the code listings on the separate sheet included e Try searching for codes as described on page 10 e Replace the Remote s batteries 15 LIMITED 2 YEAR WARRANTY AND EXCLUSIONS Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and prop
3. Universal Remote Control Cat No HCCUR Owners Manual 2 Integrated Networks DI 000 HCCUR 00A READ THis First SAFETY CONSIDERATIONS Remember to exercise good common sense when using the Home Automation features of your Remote especially when scheduling unattended devices There can be some unexpected consequences if not used with care For example an empty coffee pot can be remotely turned on If that should happen your coffee pot could be damaged from overheating If an electric heater is turned on by remote control while clothing is draped over it a fire could result DO NOT USE the remote for the control of high power heating appliances such as portable heaters WARNING TO PREVENT ELECTRIC SHOCK HAZARD DO NOT EXPOSE ANY PART OF THE HOME AUTOMATION SYSTEM TO RAIN OR MOISTURE CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT DISASSEMBLE ANY PART OF THE HOME AUTOMATION SYSTEM S PLUG IN MODULES OR CONTROLLERS NO USER SERVICEABLE PARTS ARE INSIDE IF YOU SPILL LIQUID ON A UNIT DISCONNECT THE UNIT FROM THE AC OUTLET TO PREVENT POSSIBLE FIRE OR SHOCK HAZARD AND CONSULT AUTHORIZED SERVICE PERSONNEL POWERLINE OPERATED EQUIPMENT OR ACCESSORIES CONNECTED TO ANY OF THESE UNITS SHOULD BEAR THE UL LISTING OR CSA CERTIFICATION MARK AND SHOULD NOT HAVE BEEN MODIFIED IN ANY WAY THAT MIGHT DEFEAT THEIR SAFETY FEATURES FCC Caution THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES OPERATION IS SUBJECT TO THE FO
4. The LED turns off after the last digit entered 6 Point the remote at your audio component and press the POWER button Your audio component should turn off 7 Turn your audio component on and press CHANNEL If it responds setup is complete NOTES If your audio video component does not respond try the other codes for your brand If it still doesn t respond try the Code Search using the followingmethod If the LED blinked rapidly when you entered the code you may have entered an invalid code Recheck the code in the code list separate sheet and try again SEARCHING For Copes 1 Turn on the device you want to control 2 Press and hold SETUP until the LED indicator lights steadily Release Setup button 3 Press the mode button that matches the equioment you want to control The LED blinks once 4 Press CHANNEL repeatedly until the device to be controlled changes channel If you accidentally go past the code press CHANNEL repeatedly until the channel changes again 5 Press and release the ENTER button complete the setup NOTE You might have to press CHANNEL many times 50 If the device does not have a Channel Up function use the PLAY button VCR only or the POWER button 10 IDENTIFYING CODES FOUND USING THE SEARCH PROCEDURE 1 Press and hold the SETUP until the LED indicator lights steadily Release Setup button 2 Press the mode button that matches the equioment you
5. LLOWING TWO CONDITIONS 1 THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND 2 THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION This equipment generates and uses radio frequency energy and if not installed and used properly that is in strict accordance with the manufacturers instructions it may cause interference radio and television reception It has been type tested and found to comply with the limits for remote control devices in accordance with the specifications in Sub Parts B and C of Part 15 of FCC Rules which are designed to provide reasonable protection against such interference in a residential installation However there is no guarantee that interference will not occur particular installation If this equioment does cause interference to radio or television reception which be determined by unplugging the equipment try to correct the interference by one or more of the following measures e Reorient the antenna of the radio TV experiencing the interference e Relocate the interface with respect the radio TV e Move the interface away from the radio TV e Plug the interface into an outlet on a different electrical circuit from the radio TV experiencing the interference f necessary consult your local Dealer for additional suggestions NOTE Modifications to any of the components in this kit will void the user s auth
6. er use for two years from the purchase date Leviton s only obligation is to correct such defects by repair or replacement at its option if within such two year period the product is returned prepaid with proof of purchase date and a description of the problem to Leviton Manufacturing Co Inc Att Quality Assurance Department 59 25 Little Neck Parkway Little Neck New York 11362 2591 In Canada send to Leviton Mfg of Canada Ltd 165 Hymus Blvd Point Claire Quebec Canada HOR 1E9 This warranty excludes and there is disclaimed liability for labor for removal of this product or reinstallation This warranty is void if this product is installed improperly or in an improper environment overloaded misused opened abused or altered in any manner or is not used under normal operating conditions or not in accordance with any labels or instructions There are no other or implied warranties of any kind including merchantability and fitness for a particular purpose but if any implied warranty is required by the applicable jurisdiction the duration of any such implied warranty including merchantability and fitness for a particular purpose Is limited to two years Leviton is not liable for incidental indirect special or consequential damages including without limitation damage to or loss of use of any equipment lost sales or profits or delay or failure to perform this warranty obligation The remedies provided herein are the exclus
7. is operating POWER Works in the same way as your original remote SET UP Used for programming the remote HOUSE SYMBOL Lets you control modules to operate lamps and appliances around the home TV VCR CBL AUX1 AUX2 SAT Used to select the device to control SAT includes DBS receivers 0 9 Used as your original remote and to enter device codes LAST Selects the last channel viewed on your TV VCR Cable Box or Satellite Receiver CHANNEL Works like your original remote Also used to switch modules on and off MUTE Works the same as your original remote VOLUME Works like your original remote Also used to brighten and dim lamps connected to Modules TIMER Used to set the Sleep Timer to automatically switch off the TV or modules after a preset time CAP CAPTION Has different function depending on Mode e g TV Closed Caption in TV Mode PLAY REW FF STOP PAUSE Work the same as on your original remote REC Record button Works the same as your original remote You must press the REC button twice to begin recording SHIFT For accessing additional functions DISP DISPLAY Used to access on screen information SETTING UP FOR TV VCR Caste Box AND SATELLITE RECEIVER 1 Turn on the device you want to control TV VCR cable box satellite receiver etc 2 Press and hold SETUP until the LED Fax indicator lights steadily Release the SETUP button 3 Press and
8. ive remedies under this warranty whether based on contract tort or otherwise For Technical Assistance Call 1 800 824 3005 U S A Only 1 800 405 5320 Canada Only www leviton com DI 000 HCCUR 00A 16
9. ority to operate this equipment CONTENTS INTRODUCTION 5 GETING STARTED 6 GIN REMOTE 6 SETTING UP YOUR REMOTE ccesccesccesccsccecccescesccescesccescees 6 BUTTON DESCRIPTIONS 6 SETTING UP FOR TV VCR CABLE BOX AND SATELLITE RECEIVER 8 AUX CONTROL A SECOND TV VCR CABLE BOX OR SATELLITE RECEIVER 9 SEARCHING FOR 10 IDENTIFYING CODES FOUND USING THE SEARCH PROCEDURE 1 SETTING THE TV SLEEP TIMER 12 CONTROLLING MODULES ss csscpncsrentnessdachsscvonanoatsaseceveavouanens 12 THE HC SLEEP 18 CHANGING THE HOUSE CODE 14 TROUBLESHOOTING esesesesosososososososososososososssssossssosososososos 15 esaerea en E EE E 16 INTRODUCTION Congratulations on your purchase of a Leviton Universal Remote Control Make your lights and appliances go to work for you The Remote will control most or all of your video and audio equipment But what really sets it apart from other remotes is that you can also control almost any light or appliance in your home even in another room And it s easy set up Within minutes you can be using your Remote dim the lights start brewing a fresh pot of coffee and play your favorite Here are just some of the things y
10. ou can do with your Remote e Control your entire audio video and lighting setup for the ultimate Home Theater experience e Turn on lights at night to scare away intruders if you hear noise e Start the coffee from your bedroom when you wake UD e Turn on your electric blanket before the movie ends so you It s and warm when you go Use this manual to become familiar with your Remote This manual will explain how to set up your Remote use It with your existing Audio Video equipment Next it will show you how you can use it set up Transceiver Module and Lamp Module sold separately to operate electrical products in your home Requires Leviton Home Control Modules sold separately GETTING STARTED 6 IN 1 REMOTE The 6 in 1 Remote lets you control practically everything electrical in your home It has IR technology that lets you control all your TV VCR Cable and Satellite equipment and RF technology that lets you control lamps and appliances anywhere in your home To find out more about configuring the Remote to work with your audio video equipment refer to the following section titled Setting Up Your Remote 1 Push the tab and lift off the battery cover 2 Fit two AAA batteries taking care to match the and marks in the battery compartment SETTING UP Your REMOTE BUTTON DESCRIPTIONS INDICATOR LIGHT The indicator light flashes when the remote
11. release mode button for the device you want to control The LED blinks once Use or AUX2 for CD equipment 4 Enter the 3 digit Code from the Code List separate sheet The LED turns off after the last digit entered 5 Point the remote at the device and press the POWER button Your device should turn off 6 Turn your device on and press CHANNEL If the device responds setup is complete NOTES For CD players use the AUX or AUX 2 buttons If your TV VCR Cable Box Satellite Receiver does not respond try the other codes for your brand If it still doesn t respond try the Code Search method on page 10 If the LED blinked rapidly when you entered the code you may have entered an invalid code Recheck the code in the code list separate sheet and try again If some buttons do not operate your equipment try one of the other codes for your brand 8 Usinc AUX To CONTROL A SECOND TV VCR OR SATELLITE RECEIVER The AUX button 5 normally used to control an audio component but it can also be configured to control a second TV VCR cable box or satellite receiver 1 Turn on the equipment you want to control 2 Press and hold SETUP until the LED indicator lights steadily Release Setup button 3 Press the AUX1 or AUX2 button 4 Press and release the mode button that matches the A V equipment you want control The LED blinks once 5 Enter the 3 digit Code from the Code List
12. want to identify The LED blinks once 3 Press and release SETUP LED blinks once 4 To find the first digit press each number button from to 9 until the LED blinks The number you pressed is the first digit of the code 5 Press each number button from 0 to 9 again as above find the second digit 6 Press each number button in turn to find the third digit When the third digit has been found the LED goes out 11 SETTING THE TV SLEEP TIMER The Sleep Timer automatically turns off the TV after the time you set Press the TV button then follow the instructions below to set the Sleep Timer 1 Press and hold TIMER until the LED indicator lights steadily Release the TIMER button 2 Use the number buttons to enter the sleep time required 1 to 99 minutes 3 Press ENTER to confirm the setting NOTE Take care to leave the remote pointing at the TV to ensure it turns off the TV at the time you set CONTROLLING MODULES If you have purchased and installed a Transceiver Module you can control it and other modules as follows 1 Press and release the button with the House symbol on it 2 Use the number buttons to enter the Unit Code number of the chosen module You do not need to enter O first for a single digit number 3 Press the appropriate button for the function you require refer to next page 12 HOME CONTROL FUNCTIONS On CHANNEL CHANNEL
Download Pdf Manuals
Related Search