Universal Remote Control 510S User's Manual
Contents
1. Sterilize by autoclave only See details below Norprene food A 60 F 06402 Similar to Norprene 06404 but with FDA approval Excellent for food dairy applications Longest life good flow consistency Heat and ozone resistant Good resistance to acids alkalies Heat sealable nonaging and nonoxidizing High dielectric constant Potential leaching of USP mineral oil or blend material Good Good Not recommended Excellent Excellent Excellent Good Thermoplastic elastomer Polypropylene based material with USP mineral oil Excellent tensile strength Firm stiff material Opaque beige FDA 21 CFR 177 2600 NSF listed Standard 51 C0 1200 Hy 0z 200 No 80 Sterilize by autoclave Repeated autoclaving will not affect overall life r Our most chemical resistant tubing Resistant to corrosives solvents and oils at elevated temperatures Low gas permeability Limited pumping life Excellent Excellent Variable test before using Good Good Good Fair Thermal set rubber Viton B 67 fluorine Firm stiff material Opaque black C0 76 to 79 Ho 071310 15 4 3 Sterilization is not recommended In Canada call Labcor 800 363 5900 www labcor com Perfect for food and lab applications where FDA compliance is required Good chemical resistance Resistant to corrosives High temperature properties Limited pumping life Excellent Excelle2. La UNIVERSAL 2 Analyzers Inc MODEL 510S PORTABLE GAS SAMPLE CHILLER INSTRUCTION MANUAL 1701 South Sutro Terrace UNIVERSAL Carson City NV 89704 zers Inc 775 883 2500 Fax 775 883 6388 www universalanalyzers com LIMITED WARRANTY ALL PRODUCTS MANUFACTURED BY UNIVERSAL ANALYZERS INC ARE WARRANTED TO BE FREE OF MANUFACTURING DEFECTS FOR A PERIOD OF ONE YEAR FROM THE DATE OF RECEIPT AT THE CUSTOMER S RECEIVING AREA AND FOR AN ADDITIONAL PERIOD OF UP TO 90 DAYS IF THE PRODUCT IS PLACED IN SERVICE AFTER BEING IN STORAGE THIS WARRANTY COVERS MATERIALS AND LABOR TO RESTORE ANY PRODUCTS TO ORIGINAL FACTORY SPECIFICATIONS IF A DEFECT IS FOUND WITHIN THE WARRANTY PERIOD THE DEFECTIVE PRODUCT SHOULD BE SENT FREIGHT PREPAID TO THE FACTORY IN CARSON CITY NEVADA REPAIRS WILL BE PERFORMED AT THE FACTORY AND RETURNED PREPAID BY THE SAME SHIPPING METHOD USED TO SEND THE PRODUCT TO THE FACTORY THIS WARRANTY DOES NOT APPLY WHERE THE EQUIPMENT HAS SUSTAINED DAMAGE DUE TO NEGLECT MODIFICATION CORROSION OR OTHER REASON BEYOND THE SCOPE OF THE NORMAL DEFINITION OF MANUFACTURING DEFECT FURTHER THIS WARRANTY IS LIMITED TO REPLACING THE DEFECTIVE COMPONENTS AND RETURNING THE EQUIPMENT MANUFACTURED BY UNIVERSAL ANALYZERS INC TO THE CUSTOMER IN WORKING CONDITION ANY OTHER CLAIMS ARE OUTSIDE THE SCOPE OF THIS WARRANTY NO WARRANTIES ARE MADE AS TO THE SUITABILITY OF THE USE OF THE EQUIPMENT IN ANY PARTICULAR APPLICATION OR LO
3. and turn key counterclockwise ccw completely around the rotor The key will push the tubing uniformly into the end bell assembly Hold the second end of tubing Remove the key d Position the other end bell on top and press the end bells together Be careful not to pinch the tubing If end bells do not snap tightly together reload tubing If necessary turn key in slot on rotor shaft to adjust tubing as in Step e e With key in slot on rotor shaft turn key to align tang on rotor shaft with slot in motor drive shaft Point tubing retainer grooves up Shift the pump head slightly until it snaps on the alignment pins if present Secure with four provided screws Tighten with fingers only 2 Multi channel Mounting Flat bladed Screwdriver required for mounting Tubing loading key required for mounting Note Order special mounting hardware for multi channel pumping see 3 Replacement Parts and Accessories a Load the pump heads with tubing b Install the four correct length mounting screws into the drive c Slide the first pump head onto the mounting screws d Place key in slot on rotor shaft Twist to align tang on rotor shaft with slot in motor drive shaft Shift the pump housing around until it drops over the alignment pins if present e Repeat for each additional pump head aligning pump head tang with slot on previously mounted pump head f Slide the four flat washers onto screws and secure with the four wing
4. ASTERFLEX Para todos los modelos MASTERFLEX L S Standard Pump Heads L S Cabezales Standard MASTERFLEX Laboratoire Serie MASTERFLEX T te de pompe Standard L S Teste Pompanti Standard Bedienungsanleitung fur alle MASTERFLEX BEMYINYE L S Standard Pumpenk pfe P Em Masterflex Cole Parmer Instrument Co 1 800 MASTERFLEX 627 8373 U S and Canada only 11 847 549 7600 outside U S 847 549 7600 Local www masterflex com Barnant Company 1 800 637 3739 U S and Canada only 11 847 381 7050 outside U S 847 381 7050 Local www barnant com B A 1299 0108 ESO SUPPLIER CERTIFIED Edition 13 REGISTERED ch cf Cole Parmer Instrument Co 625 East Bunker Court Vernon Hills Illinois U S A 60061 1844 1 800 MASTERFLEX 627 8373 U S and Canada only 11 847 549 7600 outside U S 1847 549 7600 Local FAX 847 247 2929 U S and Canada only 11 847 549 1700 Fax outside U S www masterflex com e mail techinfo coleparmer com BO Barnant Company 28W092 Commercial Ave Barrington Illinois U S A 60010 2392 1 800 637 3739 U S and Canada only 11 847 381 7050 outside U S 847 381 7050 Local 11 847 381 7053 Fax outside U S 847 381 7053 Local Fax www barnant com e mail barnant barnant com These products are covered by the following U S and corresponding foreign patent 3 358 609 Ces produits sont couverts par le brevet am ricain suivant et les brevets t
5. CATION THE SUITABILITY OF THE USE OF THE EQUIPMENT IS THE RESPONSIBILITY OF THE CUSTOMER AND THE INSTALLING CONTRACTOR Dy een 1701 SOUTH SUTRO TERRACE UNIVERSAL ANALYZERS INC CARSON CITY NV 89706 0364 TELEPHONE 800 993 9309 775 883 2500 FAX 775 883 6388 UNIVERSAL ANALYZERS MODEL 510S SAMPLE COOLER SPECIFICATIONS SAMPLE FLOW RATE 0 to 2 L M at STP MAXIMUM INLET TEMPERATURE 500 F 260 C MAXIMUM INLET GAS DEW POINT 180 F 820 C MAXIMUM INLET WATER CONCENTRATION 50 MINIMUM AMBIENT TEMPERATURE 329 F 00 MAXIMUM AMBIENT TEMPERATURE 1050 F 419 C MAXIMUM COOLING POWER 50 BTU S Hr 47 kJ Hr OUTLET SAMPLE DEW POINT 419 F 59 C adjustable MAXIMUM INPUT POWER 150 WATTS VOLTAGE 90 125 VAC 50 60 Hz E 180 250 VAC 50 60 Hz ELECTRICAL CLASSIFICATION NEMA I DIMENSIONS 9 x 10 x 6 HWD WEIGHT 11 LB s 5 KG at reduced flow rates See capacity chart See us on the WEB at http www universalanalyzers com e mail address sales universalanalyzers com 510 Text Rev MODEL 510 SAMPLE COOLER OPERATING INSTRUCTIONS APPLICATION The Model 510S was designed as a self contained transportable sample conditioning system to dehydrate a gas sample prior to being analyzed by a combustion monitor or transportable infra red analyzer It can be left in place powered continuously to protect an analyzer which i
6. EV MUSSELMAN DRAWING NO APVD BY TEDBARBENII P0140 DATE SCALE SIZE SHEET 08 10 95 1 1 E 10F2 2 1 GRN YEL POWER ENTRY RECEPTACLE 120VAC GRN J HEAT EXCHANGER CONDUIT AND WIRING NOTES 1 ELECTRICAL AREA CLASSIFICATION INSIDE GENERAL PURPOSE SYSTEM IS CONFIGURED AT THE FACTORY FOR REQUIRED VOLTAGE CONTACT FACTORY FOR VOLTAGE CHANGE REQUIREMENTS AC WIRING SHALL BE INDIVIDUAL CONDUCTORS OF STRANDED TINNED COPPER WITH 300V TYPE TFE INSULATION MINIMUM WIRE SIZE SHALL BE 18 AWG COLOR CODE SHALL BE AS FOLLOWS 120VAC HOT BLACK O AD592 24VDC FAN PELTIERS CONNECTOR oo 120VAC CONNECTORS PERISTALTIC PUMP RED BLK RED BLK 510 BANG BANG CONTROLLER CARD COLOR CODE SHALL BE AS FOLLOWS Ne gag POWER SUPPLY CIRCUIT BOARD GRN YEL GRN zu TURN CLOCKWISE COOLER SET 4 0 4 5 C NEUTRAL WHITE GROUND GREEN DC CONTROL WIRING SHALL BE INDIVIDUAL CONDUCTORS OF STRANDED TINNED COPPER WITH 300V TYPE TFE INSULATION MINIMUM WIRE SIZE SHALL BE 18 AWG RED BLUE 17 15 03 Was DIN Layout Drwg Moved to P0738 DATE DESCRIPTION REVISIONS MATERIAL DESCR
7. IPTION PART NO DIMENSIONS IN INCHES TOLERANCES MODEL 510 WIRING SCHEMATIC 0 015 00 010 000 005 PART NO FOR Not Issued INSTRUMENT FRACTIONAL ALL 015 ANGLES 1 307 UNIVERSAL ANALYZERS INC 1701 South Sutro Terrace Carson Ciy Nevada 89706 USA UNLESS OTHERWISE SPECIFIED 2 DRAWN BY EVMUSSELMAN DRAWING NO APVDBY TEDBARBENII P0140 DATE SCALE SIZE SHEET 08 10 95 NTS D 20F2 1 1701 SOUTH SUTRO TERRACE CARSON CITY NV 89706 0364 TELEPHONE 800 993 9309 775 883 2500 FAX 775 883 6388 SPARE PARTS FOR MODEL 510 TRANSPORTABLE SAMPLE COOLER Part Number 9216 0017 3016 0003 9515 0034 5200 0062 4800 0013 1150 0017 3600 0018 5400 0006 4958 0028 4958 0031 4958 0055 Description 2 length of 1 4 O D Viton sample tubing 16 Thermoelectric elements Insulation kit 316SS Heat Exchanger 24 VDC Cooling Fan Temperature Transducer Assembly Control Circuit Board 24 VDC Power Supply Peristaltic Condensate Pump Motor 115 VAC Peristaltic Condensate Pump Motor 230 VAC Peristaltic Condensate Pump Head 16 See us on the WEB at http www universalanalyzers com e mail address sales universalanalyzers com 510 Spare Parts Rev Price each 14 50 192 00 63 00 108 00 74 00 75 00 130 00 210 00 210 00 210 00 130 00 Masrerflex L S for all models of M
8. d steel CRS or Stainless steel SS Operating temperature 0 to 40 C 32 to 1040F Thin wall tubing 13 14 16 17 18 Thick wall tubing 15 24 35 With tubing 17 amp 18 Use in this temperature range for continuous duty operation with no decrease in performance or product lite Pump heads will work outside this range with some possible reductions in performance or product life 07013 00 20 07013 81 aw 07013 10 21 07013 91 07013 50 52 07014 00 20 07014 81 07014 10 21 07014 91 07014 50 52 07014 92 07015 00 20 07015 81 07015 10 21 07015 91 07015 50 52 07015 92 07016 00 20 07016 81 _ 07016 10 21 07016 91 07016 50 52 07016 92 07017 00 20 07017 81 07017 10 21 07017 91 07017 50 52 07017 92 07018 00 20 07018 81 07018 10 21 07018 91 07018 50 52 07018 92 07024 00 20 07024 81 07024 10 21 07024 91 07024 50 52 07035 02 20 07035 81 07035 12 21 07035 91 5 Warranty and Return of Items I SUCUS Warranty Use only MASTERFLEX precision tubing with MASTERFLEX pumps to ensure optimum performance Use of other tubing may void applicable warranties The Manufacturer warrants this product to be free from significant deviations from published specifications If repair or adjustment is necessary within the warranty period the problem will be corrected at no charge if it is not due to misuse or abuse on your part as determined by the Ma
9. dency to take a set See information above on the differences between silicone formulations Do not use with concentrated acids and bases organic solvents or oils Poor Poor Not recommended Fair Good Fair Excellent Thermal set rubber Siloxane polymers and amorphous silica Excellent compression strength Soft material flexible Translucent clear to light amber 50 to 230 C 58 to 446 F USP Class V Extractables exceeds Class VI Implant EP FDA 21 CFR 177 2600 Exceeds 3A Sanitary Standards Produced to Bulk Pharm cGMPs FDA 21 CFR 210 and 211 C0 20 132 6579 02 7961 2763 Clean with hot water soap solution use a non oily soap such as Ivory Do not use synthetic detergent or oil based soap as they may be absorbed by the tubing and may leach into fluid Rinse well with distilled water ETO sterilization is not recom mended sufficient data is not available regarding complete outgassing of residual ETO and other ETO products No additives plasticizers or DOP odorless and nontoxic fungus resistant No taste imparted to trans ported fluids Extremely good at low temps Weather ozone corona and radiation resistant Minimal tendency to take a set See information above on the differences between silicone formulations Do not use with concentrated solvents oils acids Relatively high gas permeability See additional notes above Poor Poor Not reco
10. e heat sink is too high This could be due to placement of the cooler near a heat source 5 The sample cooler could have failed If additional information is required telephone assistance can be obtained from the factory by calling 800 993 9309 or 775 883 2500 or FAX request to 775 883 6388 6 3 8 HEATSINK FAN COOL AIR INTAKE SAMPLE OUTLET 1 4 TUBE 0000 O O O O0 0 REAR VIEW 120VAC INPUT POWER POWER CORD INCLUDED LEFT SIDE REMOVABLE COVER SCREWS 5 TYP REMOVABLE COVER _ Ac 11 3 8 9 1 8 0592 HOUSIN CONDENSATE DRAIN OUTLET FITTING TO PERISTALTIC DRAIN PUMP HEAD MUST DISCONNECT TUBE FROM FITTING TO REMOVE COVER SECTION A A INSULATED HEAT EXCHANGER CONTROL CIRCUIT BOARD POWER SUPPLY BOARD SAMPLE INLET 1 4 TUBE PERISTALTIC DRAIN PUMP HEAD CONDENSATE DRAIN RIGHT SIDE 1 SEE SHEET 2 FOR WIRING SCHEMATIC D 07 15 03 Moved DIN Drwg to P0738 Added Wiring Sht2 RPH JK REV DATE DESCRIPTION DWN APVD REVISIONS MODEL 510 PORTABLE SAMPLE COOLER OUTLINE PART NO FOR NOT ISSUED INSTRUMENT UNIVERSAL ANALYZERS INC 1701 South Sutro Terrace Carson City Nevada 89706 USA DRAWN BY
11. e range Meets classifications Gas permeability cc x mm x10 cm x sec x cm Hg Cleaning sterilization BioPharm Silicone Tubing Platinum cured ultra smooth inner surface minimizes particle entrapment Fewer extractables Lab biotech and pharmaceutical applications BioPharm Plus Silicone Tubing Platinum cured Lower spallation than regular silicone Enhanced pressure capabilities Terflex CZ To Sterilize Silicone Tubing High speed instrument flash autoclave Place tubing on non linting cloth or sterilizing paper a clean open tray for 10 minutes at 132 C 270 F at 2 kg cm 30 psi Standard gravity autoclave Wrap tubing in non linting cloth or sterilizing paper and place in a clean open tray for 30 minutes at 121 C 250 F at 1 kg cm 15 psi 2 gt 3 2 11931 Longest tubing life Ultra smooth inner surface and fewer extractables Documented biocompatibility for sensitive applications C FLEX Tubing Long tubing life Ultra smooth inner surface fewer extractables Silicone peroxide cured 96410 96400 Silicone platinum cured ae Excellent biocompatibility No leachable additives DOP or plasticizers phthalate and latex free odorless and nontoxic fungus resistant No taste imparted to transported fluids Extremely good over a wide temperature range Weather ozone corona and radiation resistant Minimal ten
12. erilize with ethylene oxide ETO Ideal for transporting hydrocarbons gasoline kerosene heating oils cutting compounds and glycol based coolants Not for use with concentrated strong acids or alkalies or autoclave To autoclave Coil loosely in non linting cloth or paper autoclave at 121 C 250 F 1 kg cm 15 psi for 30 mins tubing will appear milky air dry at max 66 C 150 F for 2 to 27 hours until clear Cleaning sterilization 1298 Unatfected by all commercially available sanitizers when using recommended procedures Sterilize with ethylene oxide ETO or autoclave To autoclave Coil loosely in non linting cloth or paper autoclave at 121 C 250 F 1 kg cm 15 psi for 30 minutes tubing will appear milky air dry at max 66 C 150 F for 2 to 2v hours until clear Formulation Descriptions Continued Sterilization Notes e Standard gravity autoclave Coil loosely in non linting cloth or sterilizing paper and place in a clean open tray for 30 minutes at 121 C 250 F at 1 kg cm 15 psi air dry at max 66 C 150 F for 2 to 2 hours until clear Ethylene oxide ETO Coil loosely in non linting cloth or sterilizing paper Follow the sterilization equipment manufacturers directions as to gas type concentration times and temperatures maintain humidity within the prescribed limits generally between 30 to 65 Radiation Cap ends of tubing if required Radiation s
13. ession strength Soft material Translucent clear to light amber USP Class VI EP FDA 21 CFR 175 300 Exceeds 3A sanitary standards 2 5 Mrad BioPharm Plus Silicone platinum cured Platinum cured silicone tubing with long life and ultra smooth inner surface Minimizes particle entrapment lower absorption Excellent biocompatibility No leachable additives DOP or plasticizers odorless nontoxic Fungus resistant No taste imparted to transported fluids Weather ozone corona and radiation resistant Do not use with concentrated solvents oils or acids Relatively high gas permeability Poor Poor Not recommended Fair Good Fair Excellent Thermal set rubber Siloxane polymers and amorphous silica Excellent compression strength Soft material Translucent clear to light amber 60 to 232 C 75 to 450 F USP Class VI EP and FDA 21 CFR Part 177 2600 criteria Exceeds 3A sanitary standards Physical properties similar to silicone with chemical compatibility of Tygon Inexpensive Excellent biocompatibility Smooth bore Nontoxic no leachable plasticizers Lower gas permeability than silicone Use with many acids and alkalies Not recommended for use with oils Moderate pumping life Good Good Not recommended Fair Good Fair Excellent Thermoplastic elastomer Styrene ethylene butylene modified block copolymer with silicone oil Excellent tensile and tear
14. gon Fuel amp Lubricant Tubing Tygon food 06429 qu INET r 2 Bi gt 3 e Longest life of all Tygon peristaltic tubing 1000 hrs Nonaging nonoxidizing Clear for easy flow monitoring Broad chemical resistance Low gas permeability Smooth bore Good for viscous fluids High dielectric constant Designed especially for handling food products bore is extremely smooth better than most stainless steels nontoxic will not affect taste or odor and clear for CIP and flow verification Excellent non wetting properties permit flush cleaning and complete drainage High dielectric constant Advantages Limitations Potential leaching of plasticizer Limited pumping life Application suitability Acids Alkalies Organic solvents Pressure Vacuum Viscous fluids Sterile fluids Good Good Not recommended Good Good Excellent Good Not recommended Good Good Excellent Good Physical characteristics and composition Temperature range Meets classifications Thermoplastic PVC based material with plasticizer Firm stiff material Transparent clear Thermoplastic PVC based material with plasticizer Firm stiff material Transparent clear 50 to 74 C 58 to 165 F FDA 21 CFR 175 300 NSF listed Standard 51 All 3A Sanitary Plastics Products Various USDA standards USP Class VI FDA 21 CFR 175 300 Gas permeability ccx mm 10 cm x sec x cm Hg x10 St
15. hould be product specific and according to GMP Tygon lab Tygon fuel amp lubricant R 3603 F 4040 A 06401 27 4 Inexpensive tubing for general laboratory applications Non aging non oxidizing Clear for easy flow monitoring Handles virtually all inorganic chemicals Low gas permeability Smooth bore Good for viscous fluids High dielectric constant Specially formulated to transport hydrocarbons petroleum products and distillates Suitable for gasoline kerosene heating oils cutting fluids and glycol based coolants Minimum extractability Low gas permeability High dielectric constant Limited pumping life Potential leaching of plasticizer Don t use with strong acids and alkalies Potential leaching Not recommended Good Good Excellent Poor Not recommended Good Good Excellent Poor Thermoplastic PVC based material with plasticizer Firm stiff material Transparent clear Thermoplastic PVC based material with plasticizer Firm stiff material Transparent yellow 44 to 74 C 50 to 74 C 37 to 74 C 747 to 165 F 58 to 165 F 35 to 165 F FDA 21 CFR 175 300 Sterilize with ethylene oxide ETO or autoclave To autoclave Coil loosely in non linting cloth or paper autoclave at 121 C 250 F 1 kg cm2 15 psi for 30 minutes tubing will appear milky air dry at max 66 C 150 F for 2 to 2 hours until clear Sterilization is not recommended www coleparmer c
16. ink is fabricated from solid block of aluminum which eliminates the epoxy joints in more conventional heat sink designs which are barriers to heat conduction The result is a heat removal system with superior performance under all conditions A small peristaltic pump flowing at a continuous rate of 5 ml per minute is used to remove the condensate from the heat exchanger PERFORMANCE MAXIMUM FLOW RATE 3 LPM WATER VAPOR CONCENTRATION AMBIENT IN GAS SAMPLE BY VOLUME TEMPERATURE 15 30 50 77 F 25 C 2LPM 1 LPM 0 5LPM EXITDEWPOINT 7 C 90 F 32 C 2LPM 1 LPM 0 5LPM DEW POINT 9 C 105 F 41 2LPM 1 LPM 0 5LPM EXIT DEW POINT 18 TROUBLE SHOOTING The presence of water in liquid form after the sample cooler is an indication of a fault in the system Reasons for the presence of condensate in the system after the sample cooler could be one or more of the following 1 Overloading of the cooling capacity of the chiller due to too much water vapor in the sample or due to too great a sample flow rate 2 The condensate pump may be faulty The heat exchanger may be full of condensate This could be due to the need to change the peristaltic pump tubing The tubing has a 3 to 6 month life 3 An air leak may be in the condensate removal system allowing air to enter and blow the condensate back into the heat exchanger 4 The temperature of the air passing through the cooler to cool th
17. mmended Fair Good Fair Excellent Thermal set rubber Siloxane polymers and amorphous silica Excellent compression strength Soft material Translucent clear to light amber 50 to 230 C 60 to 232 C 58 to 446 F 75 to 450 F USP Class VI FDA 21 CFR 177 2600 C0 20 132 Ha 6579 07 7961 2763 Clean with alcohol or hot water soap solution Use non oily soap such as Ivory Do not use synthetic detergent or oil based soap as they may be absorbed by the tubing and may leach out into the fluid Rinse thoroughly with distilled water May use ethylene oxide ETO sterilization Autoclavable Pre vacuum high temperature autoclave Wrap tubing in non linting cloth or sterilizing paper and place in a clean open tray for normal cycle of 30 35 minutes at 121 C 250 F Gamma radiation BioPharm Silicone platinum cured Shorter life Uitra smooth inner surface Minimizes particle entrapment Lower absorption excellent biocompatibility no leachable additive DOP or plasticizers Odorless and nontoxic fungus resistant No taste imparted to transported fluids Weather ozone corona and radiation resistant Platinum cured Do not use with concentrated solvents oils or acids Relatively high gas permeability Poor Poor Not recommended Fair Good Fair Excellent Thermal set rubber Siloxane polymers and amorphous silica Excellent compr
18. mperature range Meets classifications Gas permeability ccx mm cm x sec x cm Hg Cleaning sterilization Great for tissue and cell work nontoxic and non hemolytic Long service life minimizes risk of fluid exposure reduces tubing costs and pump downtime Opaque to UV and visible light to protect light sensitive fluids Heat sealable bondable and formable Extremely low gas permeability Potential leaching of USP mineral oil or blend material Good Good Not recommended Good Excellent Good Excellent Thermoplastic elastomer Polypropylene based material with USP mineral oil Excellent tensile strength Firm stiff material Opaque beige USP Class VI FDA 21 CFR 177 2600 NSF listed Standard 51 Sterilize with ethylene oxide ETO autoclave or gamma irradiation up to 2 5 Mrad Repeated autoclaving will not affect overall life Best choice for vacuum pressure applications Offers longest life with good flow consistency Heat and ambient ozone resistant Good resistance to acids alkalies Black color hides dirt and dust Heat sealable nonaging and nonoxidizing High dielectric constant Potential leaching of USP mineral oil or blend material Not recommended Excellent Excellent Excellent Not recommended Thermoplastic elastomer Polypropylene based material with USP mineral oil Excellent tensile strength Firm stiff material Opaque black CO 1200 0 200 80
19. nt Variable test before using Good Good Good Fair Thermal set rubber Viton B 67 fluorine Firm stiff material Opaque black 32 to 205 C 25 to 400 F FDA 21 CFR 177 2600 C0 76 to 79 Hy 02 131015 4 3 Sterilize with circulating hot air oven at 249 C 480 F for 16 hours 1299
20. nufacturer Repair costs outside the warranty period or those resulting from product misuse or abuse may be invoiced to you The warranty period for this product is noted on the Warranty Card Product Return To limit Charges and delays contact the seller or Manufacturer for authorization and shipping instructions before returning the product either within or outside of the warranty period When returning the product please state the reason for the return For your protection pack the product carefully and insure it against possible damage or loss Any damages resulting from improper packaging are your responsibility Technical Assistance If you have any questions about the use of this product contact t or authorized seller P i NE Masterflex Tubing Formulation Descriptions Silicone Tubing While our silicone tubing formulations share many characteristics listed are some basic differences Platinum Cured Silicone Tubing Slightly greater clarity Smooth surface low protein binding levels Ideal for pharmaceutical and biotechnology use Fewer potential leachables Peroxide Cured Silicone Tubing Greater physical compression capability Potential outgassing of peroxide products Economical Longer tubing life Tubing photo Advantages Application suitability Acids Alkalies Organic solvents Pressure Vacuum Viscous fluids Sterile fluids Physical characteristics and composition Temperatur
21. nuts Tighten with fingers only 9 A support bracket is supplied with 3 and 4 channel mounting hardware for additional support Mount over bottom two screws Insert one of three different adjustment screws depending upon drive height Trademarks bearing the amp symbol in this publication are registered in the U S and in other countries 3 Replacement Parts and Accessories A End Bells order two end bells for a complete head assembly B Rotor assemblies Pump Head number Pump Head suffix 07013 75 07013 76 07013 80 07013 95 07013 07014 07016 07017 07018 07015 07024 07035 C 07021 04 Thrust washers Pack of 10 D 07013 90 Tubing loading key E Mounting hardware for standard pump heads Set contains four 8 32 screws four washers and four wing nuts 07013 02 07013 04 07013 05 07013 08 07013 09 07013 03 07013 06 07013 07 4 Specifications Thin wall Thick wall Maximum continuous discharge pressure psi bar 20 1 4 25 1 7 Maximum intermittent discharge pressure psi bar 35 2 4 40 2 7 Maximum vacuum 660 5101 mm Hg 26 20 in Hg Maximum suction lift 8 8 6 7 m H50 29 22 ft H20 Number of rollers 3 Occlusion Standard fixed Maximum pump speed rpm 600 Nominal torque load Housing materials 6 5 kg cm 90 oz in Polycarbonate PC all models or Polyphenylene sulfide PPS all models except 07035 Roller rotor materials Cold rolle
22. om Cole Parmer Instrument Company 800 323 4340 Fax 847 247 2929 WHERE TO ORDER TUBING W CAL tubing 1305 L S tubing 1323 1327 tubing 1358 1359 W B T tubing 1383 PharMed Tubing Over 10 000 hours of tubing life Resists ozone and UV radiation Non cytotoxic and non hemolytic Ideal for tissue and cell culture work Heat sealable and bondable Norprene Tubing Up to 10 000 hours of tubing life Best choice for pressure vacuum applications Resists heat ozone acids and alkalies Heat sealable and bondable Nonaging nonoxidizing Continuous pressures Up to 100 psi L S High Pressure Pump System Norprene Food Tubing Ideal for high temperature food and beverage applications Similar characteristics as Norprene tubing Meets FDA and NSF standards Viton Tubing Excellent chemical resistance Resists corrosives solvents and oils at elevated temperatures Low gas permeability FDA formulation available 1231 NOILVWUO FDA approval we offer FDA Viton tubing Series number See page 1339 for details and to order our L S high pressure tubing PharMed 65 06485 Advantages Limitations Application suitability Acids Alkalies Organic solvents Pressure Vacuum Viscous fluids Sterile fluids Physical characteristics and composition Te
23. rangers correspondants 3 358 609 Diese Produkte sind durch das folgenden US und entsprechende aus l ndische Patent gesch tzt 3 358 609 Estos productos est n cubiertos por la siguiente patente de EE UU y patente extranjera correspondiente 3 358 609 Questi prodotti sono protetti dal seguente brevetto statunitense e dal corrispondente brevetto straniero 3 358 609 I FOXISEUCSIKIII 30 SEL FON EREIN THES W 3 358 609 8 Printed in U S A 131001 1 Single Pump Head Loading WARNING PRODUCT USE LIMITATION These products are not designed for nor intended for use in patient connected applications including but not limited to medical and dental use and accordingly have not been submitted for FDA approval Note Use only MASTERFLEX precision tubing with MASTERFLEX pumps to ensure optimum performance Use of other tubing may void applicable warranties Contents One pump head one 15 in 38 cm length of silicone tubing one mounting hardware package manual and tubing loading key Supplied tubing loading key required for assembly a Separate the end bells the pump head halves Hold the end bell containing the rotor as shown with the tubing retainer grooves pointing down b Place tubing in the right groove and against the first two rollers Hold tubing with thumb Near groove insert smaller prong of loading key between the top of the rotor and tubing Push key in as far as possible c Push down
24. s on stream continuously analyzing a gas sample DESCRIPTION The Model 510S sample cooler is a thermoelectric chiller containing a DC power supply a temperature controller a 316SS heat exchanger and a condensate pump all encased within a stainless steel enclosure The enclosure has a convenient handle to make it easily transportable A power cord is provided to connect the chiller to line power The heat exchanger is milled out of a solid block of 316SS with tubing fittings welded onto the block The sample path is in the shape of a with the inlet and outlet at the top of the block and the condensate drain at the bottom of the V Two thermoelectric elements are sandwiched between the heat exchanger and the heat sink which discharges the heat produced by the thermoelectric elements Two thermoelectric elements are wired in series and supplied with 24 VDC to cool the sample heat exchanger A controller is provided to interrupt the current through the thermoelectric elements when the temperature drops below the temperature set point The temperature is factory set at 59 C This temperature can be adjusted using a potentiometer on the control circuit board The temperature sensor is an AD592 semiconductor device The heat which is removed from the gas sample and that which is created by the Thermoelectric Elements is discharged by a heat sink which is cooled with a 24 VDC muffin fan blowing directly into the heat sink The heat s
25. strength Soft material Opaque white 73 to 136 C 100 to 275 F USP Class VI FDA 21 CFR 177 2600 00 25 147 Hy 05 4715 N 2284 To autoclave coil loosely in non linting cloth or paper autoclave at 121 C 250 F 1 bar 15 psi for 30 minutes Sterilize by ethylene oxide ETO autoclave or gamma irradiation up to 2 5 Mrad C0 25 147 Oy 4715 No 2284 To autoclave coil loosely in non linting cloth or paper autoclave at 121 C 250 F 1 bar 15 psi for 30 minutes Sterilize by ethylene oxide ETO autoclave or gamma irradiation up to 2 5 Mrad In Canada call Labcor 800 363 5900 www labcor com Sterilize by ethylene oxide ETO gamma radiation or autoclave Continued on next page 1297 Masterflex Tubi Tygon Tubing Our Tygon tubing comes in four separate formulations that share common characteristics but differ in tubing life and other specifications See descriptions below for details about each formulation Tygon LFL Tubing Tygon Lab Tubing Longest tubing life Ideal for general transfer applications Broad chemical compatibility Economical Low gas permeability USP Class VI and FDA Tygon Food Tubing Meets various food and sanitary regulations Unaffected by all commercial sanitizers Non wetting properties enable flush cleaning and complete drainage Smooth inner surface Nontoxic nonaging and nonoxidizing Ty
Download Pdf Manuals
Related Search