Tripp Lite U209-000-R User's Manual
Contents
1. Kbps LED Data Transfer Handshaking orange Power Consumption 450 mW USB Specification V1 1 Compliant DB 9 Assignments Pin Assignment Pin Assignment 1 CD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 GND FCC Radio TV Interference Notice Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures reorient or relocate the receiving antenna increase the separation between the equipment and receiver connect the equipment into an outlet on a circuit different from that which the receiver is connected consult the dealer or an experienced radio television technician for help The user must use shielded cables and connectors with this product Any changes or modi2. tab On Windows 98 click on the plus sign in front of Universal Serial Bus Controllers heading to see the Universal Serial Bus Controller listing If installation was successful you should see an entry for USB to Serial Cable in the listing On Windows 2000 the device will show up under ports as an additional Comm Port Uninstalling the Driver 1 Open the system folder My Computer gt Control Panel gt System 2 Click on the Device Manager tab 3 Click on the plus sign in front of Universal Serial Bus Controllers heading to see the Universal Serial Bus Controller listing 4 Select USB to Serial Cable 5 Click the Remove button Peripheral Installation 1 With the USB to Serial Adapter already installed plug the peripheral into the adapter and then turn the peripheral on 2 Follow the Installation Wizard s on screen instructions to complete the installation Read if Experiencing Installation Problems When Using a Tripp Lite USB to Serial Adapter U209 000 R on a Laptop Notebook PC The following procedure may be required if you have a laptop that does not have a hardwired native serial port On this type of unit the manufacturer may have eliminated the serial chipset on the motherboard thereby disabling the USB adapter s port emulation feature If this is the cause of your problem the following procedure will resolve this issue Please follow the instructions in their entirety Creating a V
3. POSSIBILITY OF SUCH DAMAGE Specifically TRIPP LITE is not liable for any costs such as lost profits or revenue loss of equip ment loss of use of equipment loss of software loss of data costs of substitutes claims by third parties or otherwise The policy of TRIPP LITE is one of continuous improvement Specifications are subject to change without notice TRIPP LITE 1111 W 35th Street Chicago IL 60609 USA 773 869 1234 USA 773 869 1212 International www tripplite com 200205099 93 2072_EN
4. Tripp Lite World Headquarters 1111 W 35th Street Chicago IL 60609 USA 773 869 1234 www tripplite com USER S MANUAL USB to Serial Adapter TRIPP LITE Model U209 000 R NOTE Follow these installation and operating procedures to ensure correct performance and to prevent damage to this unit or to its connected devices Copyright 2002 Tripp Lite All rights reserved All trademarks are the property of their respective owners Technical specifications are subject to change without notice System Requirements 1 USB enabled PC system with a USB port 2 Operating systems Windows 98 or Windows 2000 3 CD ROM Drive to load drivers Installation 1 With the computer booted up insert mini CD and plug the USB to Serial Adapter into the computer s USB port the New Hardware Wizard appears click on Next to continue 2 In the dialog box that appears leave the default choice Search for the best driver for your device click on Next to continue 3 In the Ready to install dialog box that appears click on Next to continue Files are now copied to your hard disk 4 After the driver files have been copied to the hard disk a dialog box appears to tell you that the installation has finished Click on Finish Windows now finishes up the installation Checking the Installation RE Open the My Computer folder Open the Control Panel folder Open the System folder Click on the Device Manager
5. fications to this product not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment LIFETIME LIMITED WARRANTY TRIPP LITE warrants its products to be free from defects in materials and workmanship for life TRIPP LITE s obligation under this warranty is limited to repairing or replacing at its sole option any such defective products To obtain service under this warranty you must obtain a Returned Material Authorization RMA number from TRIPP LITE or an authorized TRIPP LITE service center Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase This warranty does not apply to equipment which has been damaged by accident negligence or misapplication or has been altered or modified in any way EXCEPT AS PROVIDED HEREIN TRIPP LITE MAKES NO WARRANTIES EXPRESS OR IMPLIED INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE Some states do not permit limitation or exclusion of implied warranties therefore the aforesaid limitation s or exclusion s may not apply to the purchaser EXCEPT AS PROVIDED ABOVE IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT EVEN IF ADVISED OF THE
6. irtual Com Port on Your Laptop Notebook 1 Open Add New Hardware Start Settings Control Panels Add New Hardware 2 Add New Hardware Wizard Introduction screen will appear Click Next 3 Computer will search for connected devices Either a prompt will appear asking you to select a device from a list or it will ask you if you want to search for new devices If asked to select from a list click No and then Next If not prompted simply click Next If prompted to select from a list the next screen will ask if you want to search for new drivers Click Next 8 9 10 11 The following screen will alert you to the fact it will now search for new devices Click Next Note This may take several minutes depending on your system The screen may go black for a few seconds This is normal When done select Next A list of device types will appear Scroll down to Ports Com amp LPT Click Next A two paned list will appear On left under Manufacturers select Standard Port Types On the right under Models select Communications Port Click Next You will be prompted to set up the properties and settings of the Com Port Leave values as defaults Click Next When completed select Next You will be prompted to restart Click Yes After restart reinstall the USB Serial Adapter onto the Virtual Com Port If Your Computer Does Not Bo
7. ot Up After You Install Your Com Port do the Following il Disconnect the USB Serial Adapter Boot your machine in Safe Mode To do this press F8 when you first boot up Press it repeatedly until you get a selection screen choose Safe Mode After boot up go into your device manager and select the Com Port Click Remove Follow the prompts and restart as normal Installing the USB to Serial Adapter s Driver May vary slightly depending upon installed O S version 1 Open Device Manager Start Settings Control Panels System Device Manager Tab 2 Select the USB Serial Adapter It will appear as Unknown Device Composite Device or USB Device It will appear under Other Devices or Universal Serial Bus Controller Click Properties Click on Reinstall Drivers In Add New Hardware Wizard click Next It will now conduct a search choose Next SU Ee a E Select Specify Location Next click Browse or select the driver location Select either the drivers on the CD Example D U209 000 R or the one downloaded Note if you are using Windows ME you need to use the WIN98 driver Click Next 8 If detected click Next If not go back and try again 9 When done click Finish 10 Connect your Serial Device to the USB Serial Adapter Specifications Function Description Data Transfer Rate Over 500
Download Pdf Manuals
Related Search