Triax TSR 1000 User's Manual
Contents
1. 14 3 1 4 4 Edit 14 3 1 5 Find 15 3 2 Radio Channel List 16 3 3 Channel Setup 16 3 4 Favorite channel list name 17 Contents 2 3 5 Delete All 17 3 6 Restore channel list and settings 17 3 7 Save channel list and settings 18 4 Installation 19 4 1 Antenna Setup 19 4 2 Single Search 20 4 3 Multi Search 21 4 4 TP Scan 21 4 52. 6 2 4 Volume 6 2 5 Channel Number 7 2 6 Mute 7 2 7 Pause 7 2 8 Recall 7 2 9 Favorite 7 2 10 EDIT 8 2 11 Audio Track Mode 8 2 12 INFO 8 2 13 EPG 8 2 14 TV RADIO 9 2 15 Channel List 9 2 16 Change Satellite
3. 32 6 3 Game 32 6 4 Factory Default 34 6 5 Software Upgrade 34 6 6 SatcoDX Auto Programming 37 7 Technical Specification 38 Remote Control amp Panel Description 3 1 Remote Control amp Panel Description 1 1 Front Panel Description 1 POWER Is used to switch between the working mode and the standby mode 2 Display 4 Digit 7 Segment Displays the received channel number while operating and time while in standby mode 3 Remote Sensor Detects the infrared signals from the remote control unit 4 VOL To change volume to move cursor change numbers in the menu or to change the choice 5 MENU To enter into the main menu and exit all menus 6 CH To change channels or for navigating and changing values in menus 7 OK To select an item in the menu and confirm it or pop up channel list when no menu Remote Control amp Panel Description 4 1 2 Rear Panel Description 1 IF OUT Satellite output for cascading to other devices Note The operation of another receiver
4. 10 2 17 MULTI PIC 10 2 18 LNB Short 10 2 19 SUB 11 2 20 TXT 11 2 21 OK 11 3 Channel 12 3 1 TV Channel List 12 3 1 1 Favorite 13 3 1 2 Move 13 3 1 3 Sort 13 3 1 4 TV Channel List Edit 14 3 1 4 1 Delete 14 3 1 4 2 Skip 14 3 1 4 3 Lock
5. Yes it will scan free channels only 3 In Scan Channel item press Volume Up Down to select to scan TV radio channels or just TV channels or just radio channels 4 In Scan Mode item you can select Preset Scan or Network Scan to scan preset transponders or network transponders of the selected satellite 5 Move the highlight to Search and press OK button to start scanning Bars are showing the progress of the channel scanning in the lower part of the window and the found channels are listed 6 You can stop the scan with MENU button Menu Operations 21 4 3 Multi Search When you enter the Multi Search menu a window like the one beside will open 1 On Satellite item press OK to open the satellite list Then press Channel Up Down to move the highlight and press OK to mark unmark and MENU to finish the selection You can select several satellites in this menu The system will use DiSEqC1 0 1 1 DiSEqC1 2 and USALS functions to search the marked satellites and scan channels 2 On FTA Only item press Volume Up Down to select scanning of all channels or just scanning of free channels If you select Yes it will scan free channels only 3 On Scan Channel item press Volume Up Down to select the scanning range from TV radio channels only TV channels or only radio channels 4 On Scan Mode item you can select Preset Scan or Network Scan
6. 6 Press OK to change and display the marked channel 2 16 Change Satellite 1 In TV radio mode press Page Up Down to switch directly between satellites 2 In TV radio mode press SAT to open satellite list and select there 2 17 MULTI PIC In TV mode press MULTI PIC button to enter the PIC Select menu 1 In PIC Select menu it has 4 options you can choose 4 PIC 9 PIC 16 PIC or 12 PIC channels preview window static starting from the current channel Only the marked preview program is continuously playing 2 Press CH VOL to change the marked channel among the preview programs 3 With the number buttons 1 9 you can directly move the highlight to the related channel 4 With OK you return to full screen mode in the marked channel 2 18 LNB Short When LNB is short it will notify user on screen LNB Short Please check your cables and connections for shorts When the short is removed the warning message will disappear Basic Operations 11 2 19 SUB SUB Subtitle In OSD Setting menu use Volume Up Down to select On or Off If the current channel has subtitle information it will be displayed if this function is On If this function is Off subtitles won t be displayed 2 20 TXT 1 Press TXT button in TV mode to open the teletext page This service is depending on the support of the channel provider 2 If the channel does not supp
7. Yes then you need to enter the password every time you want to open the menu If set to No then you can open the menu without entering the password first 3 Channel Lock If set to Yes then you need to enter the password before you can see those channels which have been marked as locked channels in the Channel menu If set to No then even those channels can be selected without entering the password first 4 New Password Here you can change the existing password You should do this after you set up the receiver the first time and every time when you think that your password is known by unauthorized persons To change the password enter the new password in the New Password item and repeat the same one in the Confirm Password item If the passwords are not identically then you will see a warning message If you entered the same new password in both fields then you will see the message Saving Data Please Wait From now on you need to use the new password to open locked menus or locked channels NOTE The default password is 0000 5 Press MENU to leave the Parental Lock menu 5 6 LNB Power Here you can set the power output to the LNB If your receiver is connected to the LNB directly then you need to set the LNB power to On If your receiver is connected to a multi switch SMATV signal distribution system then it may be that you don t need to provide the power to the LNB But since this is dep
8. _______________________________________________________________ TRIAX TSR 1000 ________________________________________________________________ Digital Satellite Receiver FTA User Guide SAFETY PRECAUTION CAUTION The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to dangerous voltage and to prevent from a risk of electric shock Warning To reduce the risk of electric shock don t open the cabinet Refer servicing to qualified personnel only The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance servicing WARNING Do not use this STB where contact with or immersion in water is a possibility Do not use near flower vase washbowls kitchen sinks laundry tubs swimming pools etc WARNING Do not put the candle or lamp stand on the cabinet otherwise there is the danger of fire WARNING The unit should be connected to a power supply only of the type descry bed in the operating instructions or as marked on the unit If you are not sure of the type of power supply for example 120 or 230 V to your home consult your local dealer or local power company WARNING Do not open the cabinet or touch any parts in the inner mechanism Consult your local dealer for technical service if the opening is required Note To ensure proper use of this product please read this User manual carefull
9. channel name Press MENU button you will be asked Are you sure to save Select Yes to delete the marked channel Select No to cancel the operation 3 1 4 2 Skip In channel edit menu press Green button to place a skip icon behind the name of the highlighted channel Marked channels will be skipped when you change channels in TV mode after you confirm to save the changes when you leave this menu 3 1 4 3 Lock In channel edit menu press Yellow button to place a lock icon behind the name of the highlighted channel Marked channels will be locked and displayed only after password has been entered if you confirm to save the changes when you leave this menu 3 1 4 4 Edit Pressing the Blue button in the TV Channel List Edit menu will open another window where you can choose between Edit the actual channel or create a new channel To edit the channel press the Red button Menu Operations 15 1 Selecting the name item with OK will display a button pad to show you how to edit the channel name 2 On the Video PID Audio PID and PCR PID items you can input numbers to modify the item s value 3 After modification select Save and press OK button to save the modified values and exit Edit mode Or select Exit and press OK to leave Edit mode without saving the modifications Create Press Green button to open the Create window 1 Press OK button on the Satellite
10. pointing Select another channel 2 The signal of current TV channel is too weak You can try to change to other channels with a stronger signal If the problems still exist please consult your local dealer or installer for technical service 3 You selected the wrong LNB type in the installation menu or your DiSEqC switch configuration is not correct 2 2 Standby Mode 1 Press Power button to switch from TV radio mode to standby mode 2 In standby mode press Power button again to switch back to TV radio mode The last active channel will be showed 3 To switch off the STB complete press the main power button 2 3 Channel In TV radio mode press Channel Up Channel Down to change channel 2 4 Volume In TV radio mode press Volume Up Volume Down to adjust volume Basic Operations 7 2 5 Channel Number In TV radio mode you can enter the channel number directly with your remote control unit and confirm the number with the OK button to change to the desired channel 2 6 Mute 1 Press the Mute button to mute the sound On the screen an icon will be displayed to indicate the muted sound 2 Press the Mute button again to restore the sound 2 7 Pause 1 In TV radio mode press the Pause button to stop the display The sound of the channel will continue 2 Press Pause again to continue the display at the actual moment 2 8 Recall Pressing the Recall button allows you to toggle between the actual and the last
11. value With every time you press the button the time offset will be increased decreased by half an hour Date and Time items are only available when the GMT Usage is set to Off Press Volume Up Down to select one item and use number buttons to input time and date directly Menu Operations 28 NOTE If the current channel provides the correct time information you will see the current time after you entered Time menu If the channel doesn t provide time information you have to input the date and time information manually The most channels support the time signal Press MENU to leave the Time menu 2 Timer Select Timer item and press OK to enter the Timer list menu You can press Channel Up Down to select a timer Then press OK to open the related timer menu The current time will be displayed in the first column If the current time is incorrect please modify it with the Number buttons Timer Number You can press Volume Up Down to switch the Timer number There are totally 8 timers Timer Mode Select how often the timer is running Once Daily Weekly Monthly and Yearly or switch the timer Off Timer Service Select between Channel timer setting for channel change and Wakeup Sleep and Message reminding message When you select Channel timer setting for channel change and Wakeup Sleep then you have further options you need to set Wakeup Channe
12. Satellite List 22 4 6 TP List 23 4 7 Satellite Guide 24 5 System Setup 26 5 1 Language 26 5 2 TV System 27 5 3 Time amp Timer Setting 27 5 4 OSD Setting 29 5 5 Parental Lock 30 5 6 LNB Power 30 5 7 RCU position switch 31 6 Tools 32 6 1 Information 32 6 2 Quick Setup
13. at the same time is only possible with limited channel selection 2 IF IN Satellite input 3 RS 232 Serial Port allowing software upgrades 4 ANT IN Connect the antenna of TV to Aerial IN 5 AC IN Mains input cable 6 POWER ON OFF Allows to completely switch off the receiver 7 VIDEO AUDIO HiFi outputs for stereo set or monitor 8 TV SCART Output SCART for the connection to a TV set 9 TO TV Output to TV 10 VCR SCART Output SCART for the connection to a VCR set Remote Control amp Panel Description 5 1 3 Remote Control Description Basic Operations 6 2 Basic Operations 2 1 Switch on STB Switch the Device s Main Power switch on you will set Language First Audio Second Audio LNB Power Antenna Setup and Multi Search Frequently Asked Question Q The power of my STB is on and it is running in TV mode but the TV screen shows nothing A Make sure the TV set has been set to the correct video input not the TV channels For example if you have connected the unit to the video1 input of the TV set then you need to select the corresponding input of the TV Mostly it is done with the AV button of the TVs remote control unit Q My STB is running in TV mode but the TV screen shows nothing except one ball and No Signal A That means the channel you selected has no signal This can be caused by several reasons 1 The channel you selected is not from the satellite to which your dish is
14. item to display the satellite list You can select the satellite for which you want to create a new channel 2 With marked TP Index item press VOL to select the TP number where the channel can be found The next three items will show the related parameters 3 Highlight the Name item and press OK to display the button pad and edit the new channel s name 3 1 5 Find 1 Press Blue button to open the Find window like showed below Press Channel Volume Up Down to select the leading character of the channel name and press OK to confirm it 2 After entering the character s highlight in the window and press OK on the RCU 3 Press MENU button to close the find window and brings you back to the channel list Menu Operations 16 3 2 Radio Channel List Basically the operation of Radio Channel List is same as TV Channel List except that in the small channel window the radio Logo will be displayed 3 3 Channel Setup When you enter the Channel Setup menu you will see a screen like beside 1 Startup Channel Press OK to enter Startup Channel menu to see the screen like showed beside If you set of Boot on Channel to On you can edit the following two items If the setting is Off the box always starts with the channel that was running when the box has been switched off On the Mode item you can select either TV channel or Radio channe
15. to scan preset transponders or network transponders of the selected satellite 5 Select Search and press OK to start scanning In the lower part of the window the progress of scanning and the found channels are displayed 6 Press MENU to cancel the scanning 4 4 TP Scan When you enter TP Scan menu a window like the one beside will be displayed 1 On Satellite item press Volume Up Down to select the satellite you want to scan or press OK to open the satellite list for selection 2 On TP Index item use Volume Up Down to select the desired transponder or Red and Green key on the RCU for the related functions When you press Red it will display New Carrier in TP Index item You have to set the parameters of TP Frequency and Symbol Rate for this new transponder Therefore use the number buttons of the RCU The available range are 3000 13450MHz and 1000 45000KS s Menu Operations 22 When you press Green a safety question will be displayed for confirmation to delete the current transponder or not If you select Yes the current transponder will be deleted and the total number of transponders will be reduced 3 For existing transponders you also can use number buttons to modify the parameters of TP Frequency and Symbol Rate or Volume Up Down to change the value directly Polarity and FTA only are used for setting scans c
16. ade by Satellite This function can upgrade the software of your receiver through data sent by a satellite At the moment we offer satellite updates only through ASTRA1 and Hotbird satellites 1 Select the satellite and TP or input the TP value and download PID 2 Then mark Start and press Enter to begin the download of the upgrade This may need up to 60 minutes Therefore we suggest using of this function only if you don t intent to watch TV during this time Menu Operations 37 6 6 SatcoDX Auto Programming This function is using the tables of the SatcoDX websites to update your channel and satellite lists You need a special application which is available on the CD ROM of the Tele Satellite magazine Install this software on your PC first 1 Start the SatcoDX application on your PC 2 Select SatcoDX Auto Programming item from the Tools menu and press OK The screen will show the message OK to Proceed 3 Press OK again and you will see the message Ready to Download 4 In the PC application set the baud rate to 115200 and start the download procedure Caution The new download channels will delete the original channels list Please be careful before using it Technical specification 38 7 Technical Specification VIDEO Decoding MPEG 2 amp MEPG 1 compatible Bit rate Max 15Mbps Output AUTO PAL NTSC Aspect ratio 4 3 16 9 Auto Active pixel 720x480 30fps 720x576 25fps O
17. ades Port16 Positioner Press Volume Up Down to select between None DiSEqC1 2 USALS Toneburst Press Volume Up Down to switch this function On or Off Polarity Press Volume Up Down to switch between Auto H V Off 0 12V Use Volume Up Down to switch ON and Off 3 DiSEqC1 0 Use Volume Up Down to switch the options of DiSEqC1 0 switches Between Disable LNB1 LNB2 LNB3 LNB4 4 TP Index Use Volume Up Down to select the desired transponder 5 FTA Only Press Volume Up Down to select to scan only free channels or even scrambled channels If you select Yes it will scan free channels only 6 Scan Channel Press Volume Up Down to select to scan TV radio channels or just TV channels or just radio channels 7 Scan Mode You can select Preset Scan or Network Scan to scan preset transponders or network transponders of the selected satellite 8 Search Press OK to start scanning In the lower part of the window the progress of scanning and the found channels are displayed 4 2 Single Search After selecting Single Search you will see a window like beside 1 In the Satellite item press Volume Up Down to select the satellite which you want to scan or press OK to open the satellite list to select directly 2 In the FTA Only item press Volume Up Down to select to scan only free channels or even scrambled channels If you select
18. ames include Tetris Snake and Othello Menu Operations 33 Basic operation statement 1 Tetris Mark Setup and press Volume Up Down to select the level speed Mark Start and press OK to start the game Mark Cancel and press OK to leave the game Play the game Press Volume Up Down to move the block left or right Press Channel Up to rotate the block clockwise Press Channel Down to drop the block faster Press OK to Pause Play the game Press MENU to leave the game and return to the game menu 2 Snake Mark Setup and press Volume Up Down to select the level speed Mark Start and press OK to start the game Mark Cancel and press OK to leave the game Play the game Press Volume Up Down Channel Up Down to guide the snake to the red blocks Every block you ate increases the length of the snake If the snake runs against a wall or against itself then it dies Press OK to Pause Play the game Press MENU to quit the game and return to the game menu 3 Othello Mark Setup and press Volume Up Down to select the game level degree of difficulty Mark Start and press OK to start the game Mark Cancel and press OK to leave the game Play the game Menu Operations 34 Press Volume Up Down Channel Up Down to position the round mark Press OK to set your stone Press MENU to
19. arental Lock LNB Power and RCU position switch 2 Press OK to open the selected item 5 1 Language After selecting the Language menu you will see a window like beside 1 Language Press Volume Up Down to select languages The selection of languages include English German French Italian Portuguese Spanish Turkish Polish Hungary Russian Arabic Farsi Danmark and Greece 2 First Audio Some channels offer more than one audio language This function allows you to set the preferred audio language for those channels If a channel offers the same audio language as the First Audio you set the system will play this audio language as default If the channel does not offer this audio language then the system will compare the offered languages with the second audio language The selections of audio languages include English French German Russian Arabic Portuguese Turkish Spanish Polish and Italian 3 Second Audio If the channel has no audio language that corresponds with First Audio but with Second Audio the system will play the second audio language as default If no audio language corresponds with the Second Audio then the default language of the current channel will be played instead The selections of audio languages include English French German Russian Arabic Portuguese Turkish Spanish Polish and Italian 4 Press MENU to return back from Language menu Menu Operati
20. d finish time This feature is depending on the service of the channel provider Press EPG to open the EPG window Basic Operations 9 2 The Red button opens the detailed schedule of the marked channel You can select an event with Channel Up Down and display the event s detailed description with OK 3 Press the Green button in the EPG menu to display the detailed information of the actual event in the selected channel With the Yellow button you can program a timer with the start and finish time and date of this event 4 Press the Yellow button in the EPG menu to program a timer with the actual events data 5 To close the EPG menu press Exit 2 14 TV RADIO In TV mode press TV RADIO to switch to radio mode In radio mode press TV RADIO again to switch back to TV mode 2 15 Channel List 1 In TV radio mode press OK button to open the channel list window 2 Press Green button to sort the channels by free and scrambled channels Free channel are listed first and scrambled channels last Basic Operations 10 3 Press Yellow button to open the SAT list After selecting a satellite the channel list will be reduced to the channels of this satellite 4 Press FAV button to open FAV list After selecting a favorite group the channel list will be reduced to the channels of this group 5 Press Blue button to open the find window You can use this feature to find channel by their names
21. ending on the kind of installed distribution system we recommend you to contact your installer or to refer to the user manual of this system to get the correct information You also just can change this setting and check if you still can receive the channels If the LNB power is off and you still can see all channels then we recommend this setting in order to save energy Menu Operations 31 5 7 RCU position switch 1 This item can select the switch controller s position The position number you choose in this menu must be same as the switch controller s setup or the switch controller can not work correctly 2 Press to modify the change Menu Operations 32 6 Tools When you enter to Tools menu you will see a screen like beside In Tools menu 1 Press Channel Up Down to select the wanted item among Information Quick Setup Game Factory Default Software Upgrade and SatcoDX Auto Programming 2 Press OK button to enter the selected item 6 1 Information 1 When you select the Information menu you will see a screen like beside The screen displays data about the current channel 2 Press MENU button to leave the information display 6 2 Quick Setup When the STB is used which need to repeat set Language First Audio Second Audio LNB Power Antenna Setup and Multi Search Particular explain consult 4 1 4 3 and 5 1 6 3 Game When you enter Game menu you will see three g
22. ess OK again to remove the channel from the marked favorite group 4 Press MENU button you will be asked Are you sure to save Select Yes to save the marked favorite group Select No to cancel the operation 5 To return to the TV channel list The channels of favorite groups are indicated with a favorite icon behind the name 3 1 2 Move 1 press Red button to show a moving icon behind the channel name 2 Move the channel to the desired position with Channel Up Down Press OK to confirm the position 3 1 3 Sort 1 Press Green to open the sort window Press Channel Up Down to select and OK to confirm your choice 2 The ways of sorting are Name A Z Sorting in Alphabetical order ignoring symbol Name Z A Sorting in Alphabetical order ignoring symbol Menu Operations 14 FTA Sort channel by free and scrambled sequence Free channels will be listed first and scrambled channels behind in the channel list Lock Unlocked channels are listed first end locked channels at the end 3 1 4 TV Channel List Edit After pressing the Yellow button a window for entering the password will open The default password is 0000 You can Move Skip Lock and Rename the channel Press MENU to leave the channel editing The system will ask you to confirm the saving of the changes you made 3 1 4 1 Delete In edit channel menu Press Red button to show a delete icon behind the
23. l On Startup Channel item you can open the channel list by pressing OK Then you can select the channel of you choice Press OK again to confirm 2 Channel Play type Use Channel Up Down to select press OK to enter Channel Play Type menu Here you can select the playing channels as All Free or Scrambled 3 If you select Free then all scrambled channels will be skipped when you change channels with Volume Up Down Press Exit to leave the Channel Setup menu Menu Operations 17 3 4 Favorite channel list name When you enter Favorite channel list name menu with 8 favorite group will be displayed Press Red or OK key on the RCU to rename favorite group with the Number buttons After modification select Save and press OK to save the favorite group name and leave the edit mode Select Exit and press OK to exit the edit mode without saving the favorite group name 3 5 Delete All To delete all channels 1 Enter the password The default password is 0000 2 After entering the password correct a safety question will show up where you have to confirm first 3 Select Yes to delete all channels or No to cancel and confirm with OK 4 In step 1 and step 2 pressing Exit will exit the function directly without saving Frequently Asked Question Q IF I incautiously delete all channels what should I do A there a
24. l Press OK to enter the channel list and select the channel you want to see Wakeup Date Use number buttons to input your wakeup date On Time Use number buttons to input your wakeup time If date and time are reached then no matter if the system is in standby mode or in playing mode it will automatically switch to the channel you set and start to play Duration Here you can set the time you want to see or play this channel After the time set the system will automatically switch to standby mode If you don t want the box the be switched to standby mode then set the duration to 00 00 Menu Operations 29 When you select Message reminding message option in Timer Service then you can enter additional data Wakeup Message Press Volume Up Down to select the category of the reminding message from Birthday Anniversary and General Wakeup Date Use the Number buttons to input your wakeup date On Time Use the Number buttons to input your wakeup time If date and time are reached no matter if the system is in standby mode or in playing mode it will automatically show a reminding message The message will be displayed on the screen until you press Exit to close it Press MENU to leave the Timer menu 3 Sleep Timer Select Sleep Timer item and press OK to set the sleep timer You will see Sleep timer OFF Sleep timer 10 Sleep timer 30 Sleep timer 60 Sleep
25. mode input number key 3 Turn on slave receiver to begin update 4 Input the password 123 by remote control to update the software 5 After update it will display End on slave panel 6 Turn off slave receiver disconnect twisted RS 232C cable and restart it Notes Input the password 123 to update the software Input the password 456 to update the data Input the password 789 to update the software and data Input the password 369 to copy the whole flash Update Software Computer to receiver 1 Connect your PC and receiver with twisted RS 232C cable 2 Turn on the receiver 3 Startup the software of upgrade_Ali exe on your PC press Select key and select bin then select port Press start on your PC Upgrade will begin 4 After upgrade the receiver will display End on panel 5 Turn off the receiver disconnect twisted RS 232C Cable and restart it Notes You need a 9 pin twisted RS 232C cable pin 2 to pin 3 pin 3 to pin 2 pin 5 to pin 5 You can not turn off the slave receiver until it display End on the panel Down Loading Method CABLE CONNECT MEASURES 1 CABLE CONNECT MEASURES a Cable Layout Menu Operations 36 b RS232 CABLE LAYOUT CONNECT TO P C CONNECT TO SVR c Among wires from no 1 to 9 connect wire no 2 and 3 crossed to both sides and then connect the GROUND GND of terminal on P C to SVR and then cut other wires Upgr
26. onditions Press Volume Up Down to select a different mode 4 On TP Index item press Red button to add a new TP 5 Press Green button to delete the current TP 6 Press Yellow button to delete all transponders on current satellite 7 After you completed your modification select the Search item and press OK to start scanning 8 On the TP Scan item press MENU to cancel the scanning and saving the found channels 4 5 Satellite List When you enter the Satellite List menu you can see a window like the one beside 1 Press Red button to enter edit satellite menu You can edit the satellite s name and its longitude Menu Operations 23 2 Press Green button to open the Add satellite window 3 After pressing Yellow button you will be asked Are you sure to delete Select Yes to delete the marked satellite Select No to cancel the operation 4 6 TP List When you open the TP List menu you will see a window like the one beside 1 Press Volume Up Down to change the marked satellite 2 Press Red button to open the Edit TP menu Here you can edit the transponder s data Menu Operations 24 3 Press Green button to open the Add TP menu Here you can add a new TP and setup its parameters 4 Press Yellow button will open a dialog box asking you to confirm the deletion of the current TP If you select Yes all the rela
27. ons 27 5 2 TV System When you enter the TV System menu you will see the screen like below 1 Display Mode is used to switch the display mode You can select from Auto PAL PAL N PAL M NTSC3 58 Press Volume Up Down to switch the desired mode 2 Aspect Mode is used to switch the screen aspect ratio mode You can select from Auto 4 3 PS 4 3 LB 16 9 Press Volume Up Down to select the needed mode 3 Video output is use for switching the screen aspect ratio mode Now we provide below options RGB CVBS You can press Volume Up Volume Down key to select each mode circularly 4 VCR Loopthrough is use for switching STB master and VCR master When VCR Loopthrough is STB master mode video output is available 5 Select RF system between PAL B G PAL I PAL D K and NTSC M 6 RF Channel In case your TV is connected through RF modulator UHF select output channel number you want 7 Press MENU to close the TV System menu 5 3 Time amp Timer Setting When you enter Time amp Timer Setting a menu with this 3 items will be opened 1 Time When you select Time and press OK then you will see a window like the one beside GMT Usage This item is used to set the time by using the time signal from the satellite Press Volume Up Down to change the setting The GMT Offset item is only available when GMT Usage is set to On Press Volume Up Down to set the GMT Offset
28. ort teletext information it will show No Teletext Data on the screen 2 21 OK In full screen press OK button to open all satellite channel list Press Red on the RCU to switch between 1 column and 3 column Menu Operations 12 3 Channel Press Menu in the TV radio mode to enter the main menu 1 Press Channel Up Down to select the channel item 2 Press OK to enter the selected item In the channel menu Press Channel Up Down to select the wanted menu item among TV Channel List Radio Channel List Channel setup Favorite channel list name Delete All Restore channel list and settings and Save channel list and settings Press OK to enter the selected item 3 1 TV Channel List If you enter the channel list menu a window like the one below will open 1 You can move the highlighted channel with Channel Up Down and press OK to preview the highlighted program in the preview window 2 Press Page Up Down on the RCU to jump between the channels by pages 3 Press Volume Up Down to switch satellite of the program group 4 Press MENU button to enter TV playing mode 5 The color buttons offer further functions to manage the channel list Menu Operations 13 3 1 1 Favorite 1 Press FAV to open the favorite window 2 You can select between 8 favorite groups with Channel Up Down Press OK to assign the channel to a favorite group press EXIT to exit favorite group 3 Pr
29. quit the game and return to the game menu 6 4 Factory Default When you press OK on the Factory Default item 1 A dialogue box will occur where you need to enter the password 2 After you input the correct password a warning message will be displayed like the one beside 3 If you select Yes then all changes you made will be reset to default values Make sure you really want to do this 4 Press MENU in both steps will close the window without resetting the receiver 6 5 Software Upgrade 1 This function allows you to upgrade the software of the receiver This can be done from PC to receiver or from a master receiver to a slave receiver 2 Connect master receiver or PC to the slave receiver via serial interface 0 Modem cable Enter the Software Upgrade menu of the master receiver and press Volume Up Down to change the upgrade mode Upgrade modes include allcode maincode CAS data ScriptGUI Radioback default db userdb 3 Switch on the slave receiver 4 Mark Start on the master reeciver and press OK to start upgrade Wait until the display on the front panel shows END Then switch off the receiver and on again Now the new software is used 5 Press MENU to save the setting without upgrade Menu Operations 35 Update Software receiver to receiver 1 Connect master and slave receivers with twisted RS 232C cable 2 Power on the master receiver and make it in standby
30. re two ways to restore To re search all channels in the Installation menu Use Default Value function to restore all channels in the Tools menu 3 6 Restore channel list and settings To restore channel list and settings 1 Enter the password The default password is 0000 2 After entering the password correct a safety question will show up where you have to confirm first 3 Select Yes press OK to restore the last backup channel list the current channel list will be erased Select No press OK to cancel the operation Menu Operations 18 3 7 Save channel list and settings To save channel list and settings 1 Enter the password The default password is 0000 2 After entering the password correct a safety question will show up where you have to confirm first 3 3 Select Yes press OK to save current channel list to backup channel list Select No press OK to cancel the operation Menu Operations 19 4 Installation After selecting the installation menu you can see the window like beside In Installation menu 1 Press Channel Up Down to select menu items among Antenna Setup Single Search Multi Search TP Scan Satellite List TP List and Satellite Guide 2 Press OK to enter the selected item 4 1 Antenna Setup After selecting antenna setup another window will be opened You can edit the following items 1 Satellite Press Volume Up Do
31. s inside the unit it may not operate properly To correct this problem turn on the power and wait about two hours for the moisture to evaporate Parts Replacement When the unit parts need to be replaced user should make sure the service technician use the replacement parts specified by the manufacturer or having the same characteristics as the original part Unauthorized replacement may put the unit in the risk of fire electric shock or other hazards Safety Check After all the maintenances and repairs are done user is required to request the service technician to conduct the overall safety check to ensure the mach ine is in the proper condition Contents 1 CONTENTS 1 Remote Control amp Panel Description 3 1 1 Front Panel Description 3 1 2 Rear Panel Description 4 1 3 Remote Control Description 5 2 Basic Operations 6 2 1 Switch on STB 6 2 2 Standby Mode 6 2 3 Channel
32. selected channel 2 9 Favorite 1 In full screen press the Favorite button to display the Favorite Group window on the screen as the picture beside shows 2 In the Favorite Group window you can select the desired favorite channel with Channel Up Down and confirm it with OK to switch to it In bigger groups you can navigate with Page Up Page Down 3 With Volume Up Down you can select different favorite groups 4 Press Exit to close the Favorite Group window Frequently Asked Question Q Why the screen displays No Favorite Channel after pressing the Favorite button A No channels have been assigned to a favorite group yet You can do this in the channel menu Basic Operations 8 2 10 EDIT In TV mode press the EDIT button to open the TV Channel List window 2 11 Audio Track Mode 1 In TV mode press the Audio button to open the audio mode window 2 Select the item you want to adjust with Channel Up Down and change the value with Volume Up Down 2 12 INFO In TV mode press INFO button can open information screen in the window shows the parameters of current channel Two dynamic bars at the bottom of the window reflect the signal intensity and signal quality of the current channel 2 13 EPG 1 The STB supports Electronic Program Guides EPG to give you information about the actual programs of certain channels like event name subtitle description start an
33. ted channels will be deleted If you select No the operation will be cancelled 5 Pressing the Blue button will open a dialog box asking you to confirm the deletion of all TP on current satellite If you select Yes all TP of the current satellite will be deleted If you select No the operation will be cancelled 4 7 Satellite Guide When you enter Satellite Guide menu you will see the screen like beside Here you can enter your local longitude and latitude and the satellite s longitude The receiver calculates the antenna s azimuth and elevation to point your antenna to the selected satellite Menu Operations 25 1 Use the Number buttons to input the values of Local Longitude Local Latitude and Satellite Longitude 2 Press Volume Up Down to switch east or west in Local Longitude and Satellite Longitude or to switch north or south in Local Latitude 3 Highlight the Start item and press OK In the lower part of the window the corresponding values for the antenna setting is displayed 4 Orientation means the angle between south and satellite 5 Press MENU to leave this feature Menu Operations 26 5 System Setup When you open the System Setup menu a window like the one beside will be opened In System Setup menu 1 Press Channel Up Down to select menu items among Language TV System Time amp Timer setting OSD Setting P
34. timer 90 Sleep timer 120 If you set a sleep time the system will change to standby mode after the chosen time period 5 4 OSD Setting When you select OSD Setting you will see a screen like beside 1 Subtitle Display Press Volume Up Down to select On or Off If the current channel has subtitle information it will be displayed if this function is On If this function is Off subtitles won t be displayed 2 OSD Timeout This setting determines the duration the info window is displayed on the screen when you change channels Press Volume Up Down to set the time between 1 to 10 seconds 3 OSD Transparency With this parameter you can set the transparency of the menus Press Volume Up Down select the value between 10 20 30 40 and Off means no transparency function 4 Load OSD Setting Default If you want to reset your OSD settings to the default settings then select this item and press OK 5 Press MENU button to leave the OSD Setting menu Menu Operations 30 5 5 Parental Lock You can set a password for anyone who wishes to operate the Installation menu You can also set the password to lock channels Below you find how to set and change the password 1 On Parental Lock press OK to open a dialogue box and input the password After you entered the correct password you will see a screen like beside 2 Menu Lock If Menu Lock is set to
35. utput connector RCA TV SCART AUDIO Decoding MPEG 2 MPEG 1 layer I amp II Mode Mono Dual Stereo Joint stereo Bit rate Max 384Kbps DEMODULATOR Demodulation QPSK Symbol rate SCPC MCPC Outer code RS 204 188 8 Inner code ALL DVB rates Energy dispersion DVB S recommendation INPUT SIGNAL Frequency 950MHz 2150MHz Input level 65dBm 25dBm Channel bandwidth 36MHz Input socked F type connector RF MODULATOR Input IEC 169 24 Male x 1 Output IEC 169 24 Female x 1 Band UHF TV Standard PAL BG I DK NTSC M Output Channel 21 69 PAL 14 83 NTSC LNB CONTROL Power supply 13 18V 500mA max with short circuit protection Polarized control 13 18V polarization vertical horizontal DiSEqC control DiSEqC1 0 DiSEqC1 1 and DiSEqC1 2 Technical specification 39 MISCELLANEOUS Supply voltage 100 240VAC 50 60Hz Power consumption 30 watts max Operation temperature 5 C to 40 C Storage temperature 20 C to 70 C Dimension W x D x H Weight
36. wn to switch satellites or press OK to enter satellite list to select directly 2 LNB Configuration Press OK to enter LNB configuration you will see a window like beside LNB Type Press Volume Up Down to switch among Standard User and Universal mode For Example If you use a Dual LNB then you should select User option in LNB Type and set the correct frequency in LNB type 22K Use Volume Up Down to switch ON and Off The 22KHz signal is used in KU universal LNBs to change between low band and high band Notice After choosing LNB type Universal you cannot modify 22K DiSEqC1 0 Use Volume Up Down to switch the options of DiSEqC1 0 switches between Disable LNB1 LNB2 LNB3 LNB4 DiSEqC1 1 Use Volume Up Down to switch DiSEqC1 1 option or press OK to enter DiSEqC1 1 option to select directly The options of this item are Disable 1Cascade M1 Port1 1Cascade M1 Port2 1Cascade M1 Port3 1Cascade M1 Port4 1Cascade M2 Port1 1Cascade M2 Port2 1Cascade M2 Port3 1Cascade M2 Port4 1Cascade M3 Port1 1Cascade M3 Port2 1Cascade M3 Port3 1Cascade M3 Port4 Menu Operations 20 2Cascades Port1 2Cascades Port2 2Cascades Port3 2Cascades Port4 2Cascades Port5 2Cascades Port6 2Cascades Port7 2Cascades Port8 2Cascades Port9 2Cascades Port10 2Cascades Port11 2Cascades Port12 2Cascades Port13 2Cascades Port14 2Cascades Port15 2Casc
37. y and retain for further reference Note Do not open the cabinet to avoid the unit direct exposure to radiation Unit Cleaning After the unit power is turned off you can clean the cabinet panel and remote control with a soft cloth lightly moistened with a mild detergent solution Attachments Never add any attachments and or equipment without the manufacturer consent as such additions may result in the risk of fire electric shock or other personal injury Locating Slots and openings in the cabinet are provided for ventilation to protect it from overheating Do not block these openings or allow them to be blocked by placing the STB on a bed sofa or other similar surface nor should it be placed over a radiator or heat register Power Cord Protection Place the power supply cord out of the way where it will not be walked on Please take special attentions to cords at plugs convenience rece ptacles and the point where they exit from the unit Object and Liquid Entry Never put objects of any kind into this STB through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill any liquid on the STB Note Moisture may be formed inside the unit in the following conditions When the unit is suddenly moved from a cold environment or an air condition room to a warm place Immediately after a heater has been turned on In a steamy or very humid room If the moisture form
Download Pdf Manuals
Related Search