Triarch 33022 User's Manual
Contents
1. Screw In bubs that damot exceed the maximum watlage specitied on the fiture s wattage rating label into the socket s on the NOTE ihe bottom opening of the lamp compartment lo the fixture la too narrow to allow pocess lo tha Sight unscrew the two decorativo screws at the lop of the lang to allow R lo drop down for INSTALLATION COMPLETED2. 33022 INSTALLATION INSTRUCTIONS PLEASE READ CAREFULLY AND SAVE THESE INSTRUCTIONS AS YOU MATINEE THEM LATER CAUTION Tum off the main power at the circuit breaker before Installing the fixture In order to prevent possible shock Remove the fixture and the mounting package from the box and make sure that no parta are missing by referencing the Wlustrations on the installation Instructions FOR CEILING MOUNT Fig 4 amp 6 1 A Place the 8 32 HEX NUTS 3 onto the 8 32 FIXTURE MOUNTING SCREWS 4 and altech the FIXTURE MOUNTING SCREWS to the MOUNTING BRACKET 2 or none plate whichever le provided Do not tighten the HEX NUTS at this lime fodure uses a single 1 8 PS NIPPLE 4 for mounting thread the 1 5 IPS HEX NUT 3 onto the NIPPLE and gcrew the NIPPLE into the MOUNTING BRACKET 2 without tightening the HEX NUT Fig 5 2 Pull the power supply wires out from the OUTLET BOX 1 and mount the MOUNTING Fa the universal mounting lo the OUTLET BOX using MOUNTING 3 Attach the power supply wires to the fixture lead wires bi connecting BLACK to BLACK 6 and WHITE lo WHITE 5 Attach the POWER SUPPL GROUND WIRE 7 from the OUTLET 1 and the FIXTURE GROUNO WIRE 6 from the fixture to the green GROUNO SCREW B on the MOUNTING BRACKET 2 or connect both wires together using the correct size of wire connectors 4 Placa the CANOPY 17 on the fsture o
3. ver the OUTLET BOX aa or NIPPLE mounting screws or Nil 4 and adjust the 48 32 fixture mounting screws or NIPPLE unid they out from the CANOPY 1 4 Remove the CANOPY and secure the position of the ficture screws or NIPPLE by tightening the HEX NUT S 3 against the MOUNTING BRACKET 2 the CANOPY back onto the fixture mounting screws or NIPPLE and secure Into place using the DECORATIVE 12 provided Screw in Kght butbs Mat do not exceed the maximum specified on the future s wettaga rating label Into the on the fixture oo INSTALLATION COMPLETED 3 Open up the end finks of te CHAIN 17 and attach one end of the CHAIN onto FIXTURE LOOP 16 Slide tha THREADED RING 14 from the SCRE 6 and the CANOPY 15 onto In that und CHAIN on to the SCREW COLLAR LOOP Close the ends of 4 Unravel the future s lead and grourid wires and thread the jesd and every oler the CHAN 17 an 0 through the SCREW COLLAR LOOP 6 E 4 assembly starting with the chain Ank atached to the FIXTURE S LOOP 18 Attach the power supply wires to the fixture wires by connecting the BLACK POWER SUPPLY WIRE 11 10 the SMOOTH FIXTURE LEAD WIRE 12 and the 6 Slide the CANOPY 15 and the THREADED RING 16 of the SCREW COLLAR LOOP 6 up tha CHAIN 17 Place tha CANOPY over the BOX 1 and secure in place by screwing the THREADED RING onto the LOOP 7
Download Pdf Manuals
Related Search