Triarch 32511 User's Manual
Contents
1. 7 Raise pipe cap check ring glass rubber washer and steel washer up over the nipple and secure with hex nut 8 Place font over the nipple and secure with finial 9 Attach crystal to the hole of fixture body 10 Restore power to the installation point ON Retain this sheet for future reference IF IN DOUBT ABOUT ELECTRICALINSTALLATION CONSULT ALICENSED ELECTRICI Page 2of2 01 082. ASSEMBLY INSTRUCTION FOR 32511 Figure 2 Fixture body iL crystal Nipple Pipe cap Check ring aaa x Glass Steel washer Hex nut Font Finial 1 Unravel the fixture supply and ground wires using wire cutters trim the fixture supply and ground wires to approx 6 inches in length from where wires exit top of fixture Trim back wire jacket approx 3 4 inches 2 With power to the installation point OFF attach the crossbar with 2 mounting screws to ceiling mounted outlet box with 2 outlet box screws 3 Make wires connections We recommend 2 people for this step Position the fixture under the outlet box Attach house ground wire to foture ground wire Proceed to attach both to the crossbar using ground screw Using wire connectors connect the house white wire to the fixture supply wire ribbed side connect the house black or red wire to the fixture supply wire smooth side Wrap all connections with approved electrical tape 4 With the connections properly made align and pass the 2 mounting screws attached to crossbar through 2 mounting holes in canopy on top assembly Locate 2 ball nuts and thread onto ends of mounting screws Hands tighten until snug to secure fixture to ceiling Be sure there are no trapped or pinched wires Screw nipple into the coupling at bottom of fixture body Install proper bulbs not provided to each socket referring to the markings and labels on fixture for maximum wattage
Download Pdf Manuals
Related Search