Triarch 32339 User's Manual
Contents
1. Unidentilied Fixture Wire 4 Machine Screws loung in junction box Hex Nut Nipple lt _ lt cna into junction box Pull leads down out of junction box for easier wiring Connect the IDENTIFIED lead while tinned or ribbed if both conductors are he saine color feel for the ribbed edge that runs the entire length of one side to the WHITE house wire Connect the UNIDENTIFIED lead to the BLACK house wire Turn the green ground screw inlo the hole in the mounting strap and wrap the bare ground wire around screw one full turn and tighten screw Connect remaining end of bare wire to the house ground wire bare It the junction box itself is metal and is already grounded attachment to the green screw only is sufficient Always use wire connectors that are UL approved for the size and number of wires to be connected Caution Never connect the bare ground wire to the black or while house wires 8 Place all wires and connectors back into the junction box making sure there are no loose wire conneclors or bare leads Slide canopy up to ceiling and hold in piace by turning knurled nut onto hanger loop 9 For tixlures with glass shades only Your glass shade is held in place either by thumbscrews or by a spin on ring screwed onto a tlireaded socket Flace glass shade s into holder and lighten thumbscrews or spin ring onto socket 10 Lamp fixture with proper size bulbs in accordance with the wattage la2. 32339 cx3pcs ASSEMBLY STEP mE 1 B A 3 3DEF A wT F C x 4PCS Included 1pc extra X C1 x 6PCS C1x6PCSFOR CANOPY K ee MOUNTING AND WIRING INSTRUCTIONS 1 Fasten mounting slrap lo junction box with machine screws found in junction box The mounting stap must be used to provide proper grounding of fixture 2 Turn nipple inlo threaded hole in the mounting strap Turn hex nut onto nipple Remove knurled nul from hang er loop Turn hanger toop onto nipple Place canopy up against ceiling and adjust nipple lo leave about 3 8 pro truding through canopy Remove canopy and tighlly lock nipple In place by turning hex nut up against mounting strap 3 Assemble one end ol chain to fixture loop by opening chain link and closing It around loop NOTE Never iwist chain link to open Chain link must be opened in a C shape 4 Weave the two conductor cord ard bare ground wite through the chain about every third link Slide knurled nut down chain Slide canopy down chain 5 Adjust chain length and wire lead length al this lime for desired hanying height of fixture Leave at least 12 of leads beyond end of chain 6 Open last chain link then lift chain and fixture up lo ceil ing and hook open link through hanger loop Close chain link 7 Insert wire leads through hole in hanger loop and nipple Junction Box Black House Wire Wire Connectors
3. bel found on the fixture While House Wire House Ground Wire Identified Fixture Wire _ Fixture Ground wo Wire N Green Ground NS Screw Mounting Strap Canopy Knurled Nut Hanger Loop c Chain ff Fixture Loop
Download Pdf Manuals
Related Search