Triarch 32103 User's Manual
Contents
1. INSTALLATION INSTRUCTION 32103 Q loop IMPORTANT column FOR A SAFE AND SECURE INSTALLATION THESE FIXTURES MUST BE INSTALLED BY MEANS OF m socket rine SUPPORTS THAT ARE INDEPENDENT OF THE OUTLET BOX HANGING THE FIXTURE 1 Shut off the power at the circuit breaker and removed gt old fixtures from ceiling including the old crossbar 2 Carefully unpack new fixture and lay all the parts on a clear surface 3 Thread nipple into coupling tight with hex nut 4 Put center column over nipple and secure with fixture loop 5 Thread bottom nipple into coupling of body I 6 Put cap over nipple secure with finial S L hippie decorative cap socket fixture 7 Place decorative cap glass and pipe over socket can then secure with socket ring finial CONNECTING THE WIRES 8 Take the black wire from the ceiling junction box and the smooth wire leg from the fixture and twist bare ends together Twist wire connector onto the end of wires until snug 9 Repeat same process with white junction box white and ribbed wire leg of fixture wire NOTE Twist wires together in the same direction as you twist the wire connector onto wires f 10 If your junction box has a grounding wire green or bare copper attach this wire and the bare copper wire from the fixture If junction box has no ground wire socket rin cane seve Tima attach the bare copper fixture wire to the junction b2. ox t with a screw 11 Tuck these wire connections neatly into the ceiling wma outlet box and then raise the canopy all the way to the ripple er ceiling Thread onto ceiling loop protruding through Egi fixture 42 Install the light bulbs in accordance with the fixtures specifications NOTE DO NOT EXCEED THE SPECIFIED WATTAGE nipple Your installation is now complete Return power to the junction box and test the fixture cap CSA010708HAMTI
Download Pdf Manuals
Related Search