Triarch 31444 9 LTS User's Manual
Contents
1. 31444 9 LTS Chandelier Assembling Instruction Unscrew the brass nut Pull the Threaded rod out from the center column Thread the threaded rod onto the coupler 1 Tighten with the hex nut Place the center column Follow by the top cap Tighten with the brass nut Thread the loop Thread the nipple onto the coupler 2 Tighten with nut Place the bottom cap and tighten with finial Place the Shade onto the candle sleeve by fix the candle follower to the sleeve Follow the wattage label on the socket and install correct wattage and type bulb onto the socket to secure the shade 9 Measure the height from hanging fixture to your ceiling Cut the excess chain and wire to fit the height F 10 For mounting and wiring step please follow the mounting instruction sheet enclosed eNO OR WON woor BRASS NUT ORNAMENT SHADE CANDLE SLEEVE Ne CANDLE SLEEVE SOCKET NIPPLE NUT T RRFL MOUNTING AND WIRING INSTRUCTIONS 1 Fasten mounting strap lo junction box with machine screws found in junction box The moutfing suap must be Used to provide proper grounding of fixture 2 Turn nipple into threaded hole in the mounting strap Turn hex nut onto nipple Remove knurled nut from hang atloop Tum hanger toop onto nipple Place canopy up against ceiling and adjust nipple to leave about 3 8 pro ruding through canopy Remove canopy and lighlly lock nipple In place by turn2. and Is already grounded attachment to the green screw only Is sufficient Always use wire connectors thal are UL approved for the size and number of wires to be connected Cautlon Never connect the bare ground wire lo the black or white house wires 8 Place all wires and connectors back into the junction box making sure there are no loose wire conneclors or pare leads Slide canopy up to ceiling and hold in place by turning knurled nut onto hanger loop 9 For fixtures with glass shades only Your glass shade is held in place either by thumbscrews or by a spin on ring screwed onto a threaded socket Place glass shade s into holder and tighten thumbscrews ot Spin ting onto socket 10 Lamp fixture with proper size bulbs n accordance with the watlage label found on the fixture y White House Wire House Ground Wire Identified Fixture Wire Z Fixlure Ground Wire ters Green Ground Screw Mounting Strap Canopy cos oa ee A Knurled Nut Hanger Loop Chain ff Fixture Loop
3. ing hex nut up againsl mounting strap 3 Assemble one end of chain to fixture loop by opening chaln fink end clasing It around loop NOTE Never twist chaln link to open Chain link must be opened In a C shape 4 Weave the two conductor cord and bare ground wite through the chain about every third lirik Slide knurled nut down chain Slide canopy down chain 5 Adjust chain length and wire lead length at this time for _ desired hanging height of fixture Leave at least 12 of leads beyond end of chain 6 Open last chain link then lift chain and fixture up to ceil ing and hook open link through hanger loop Close chain link 7 Insert wire leads through hole in hanger toop and nipple Junction Box wW Wire Connectors N Unidentified N A Fixture Wire Black House Wire Machine Screws a g found iat function bor Hex Nut 3 ee into junction box Pull leads down out of junction box lor easier wiring Connect the IDENTIFIED lead white linned or ribbed if boli conductors are he saine color feel tor the ribbed edge that tuns the entire length of one side to the WHITE house wire Connect the UNIDENTIFIED lead to the BLACK hwuse wire Turn the grean ground screw inlo the hole in the mounting strap and wrap the bare ground wire around screw one full turn and tighten screw Connect femaining end of bare wke to the house ground wire bate If tha junction box itself is metal
Download Pdf Manuals
Related Search