Home

Triarch 31405 User's Manual

1. fixture E socket ring D check ring C glass Assembly instruction for 31405 1 Install fixture loop A to fixture B 2 Connect electrical wires at Junction box and secure crossbar nipple and canopy loop 3 Secure glass C with check ring D socket ring E 4 Install light bulbs not provided Assembly Instruction for the fixture with safety cable NOTE Fixtures weighing over 50 lbs must be supported independently of the outlet bos 1 Turn off power 2 Supply wires shall cuter the outlet box through any knockout except the top center knockout 3 Fixture is to be mounted by a steel pipe approxtmately 3 4 of 3 8 18NPSN threads at buttom Not Supplied Position pipe so that approximately 1 2 of thread protrudes into outlet box Attach pipe to a Structural Bridging structural bridging member of sufficient strength to support at least 4 times Member the fixture weigh 4 Thread pipe coupling onto protruding inside outlet box 5 Thread hex nut onto threaded pipe Screw threaded pipe into pipe coupling Secure in place by tightening bex out against pipe coupling and Clamps tightening allen head scerw 6 Tbread hexnut Ship on ground wire and thread a second hex nut onto threaded pipe 7 Connect screw collar loop without threaded ring to threaded pipe 8 Pass canopy over screw collar loop Approximately one half of the screw collar loop exterior thread should be exposed Adjust loop as
2. or Clear Brown Gold or Black without tracer Black without tracer Insulated wire other than green with copper conductor Insulated wire other than green with sliver conductor Notes When parallel SPTI amp SPTII are used The Neutral wire is square shaped or ridged and the other wire Will be round in shape or smooth sce us Chain Warning Consult a qualifie Electrician for installation Light loop
3. required Remove canopy and tighten hex nut against screw collar loop Tighten second hex nut against first to hold ground wire in place 9 Attach chain to fixture not shown 10 Slip threaded ring then canopy onto chain 11 Attach chain with fixture connccted to bottom of screw collar loop 12 Weave silver support cable up chain and exit through top holc in side of pipe coupling Slip cable through top existing opening or drill 3 16 dia Hole near center of outlet box Wrap cable around structural member described in step 3 Cable must be pulled tanut to evenly distribute fixture weight between cable and chain Secure cable with 2 clamps Allen Head Screw provided 13 Weave both fixture wires and copper ground wire up chain and cxit through top hole inside of pipe coupling a 14 Connect fixture ground wire and ground wire attached to threaded pipe Ground Wire to outlet box ground wire with wire connector not provided Never connect ground wire to black or power supply wires Make wire connectings connectars not provided Reference chart below Threaded Pipe eee q Support Cable Outlet Box Pipe Coupling Hexnut for correct conacctions and wire accordingly Connect Black or Connect Black or Red Supply Wire to White Supply Wire to Black i White Parallel cord round amp smooth Parallel cord square amp ridged Screw Collar Loop Clear Brown Gold

Triarch 31405 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents