Transition Networks 10/100Base-TX User's Manual
Contents
1. EE 29 Customer pays non compliant return COSTS een 30 Nom warranty repair CO nee ee ee 30 Repaired n n warranty en ne ee 30 This warranty is YOUFONYENEN ee 30 OID Hee TON eNO ee ee ee 31 S NN en een ee ee ee eine ee 31 UL Listed C UL Listed a een 31 PFO NS E 31 Canadian FAC OU ONS nn 31 European Ir TTS PROS Ps tee ee ee ee ee A een 33 MSC ANC NS CHICANO INS 33 SISTF10xx 141 LR T specifications notices and 39 MOCO G essen ee see Bee an ee 34 gt EEEE EEE E EEE E E E EE E TE E E EE E E EE E EE 34 1 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 SISTF10xx 141 LR T Industrial Unmanaged Switch Transition Networks Trademark copyright and product classification information Trademark All trademarks and registered trademarks are the property of their respective owners Copyright 2007 Transition Networks All rights reserved No part of this work may be reproduced or restrictions used in any form or by any means graphic electronic or mechanical without written permission from Transition Networks Printed in the U S A rang FCC warning re This equipment has been tested and found to comply with the limits for class A2. Industrial Unmanaged Switch General description Overview The SISTF10xx 141 Industrial Unmanaged Switch can help eliminate EMI or RFI issues and help to overcome distance limitations with copper based cabling by providing a fiber interface to transport data from copper based industrial networking and communication devices over fiber optic cabling Each Industrial Switch can connect to either 10Base T or 100Base TX copper ports and provides a 100Base FX fiber optic connection for links up to 20km Multiple connector options are offered as well as two distinct operating temperature ranges Standard 0 C to 60 C 32 F to 140 F Extended 40 C to 75 C 40 F to 167 F Features The SISTF10xx 141 Industrial Unmanaged Switch has the following features Auto Negotiation e AutoCross e Dual redundant auto sensing 12 to 48VDC inputs with reverse polarity protection and over current protection 802 3x flow control support gt Flow control on full duplex gt Back pressure on 512KB Embedded memory 1K MAC address table e DIN Rail mounting bracket installed Wall mount bracket included e _ DIP switch to set the fiber port mode of operation full or half duplex e Barrel connector interface cable included for use with external AC DC power supply order separately 31 protection metal enclosure Lifetime Warranty 2 24 Hour Technical Support 1 800 260 1312 International 00 1
3. 952 941 7600 SISTF10xx 141 LR T Industrial Unmanaged Switch Transition Networks SISTF10xx 141 Industrial Unmanaged Switch part numbers Standard models The part numbers shown in Tables 1 and 2 perform as described in this manual Table 1 Industrial Unmanaged Switch Part Numbers Standard Operating Temperature 0 C to 60 C Part Number Ports 1 4 10 100Base TX Port 5 100Base FX SISTF1011 141 LR RJ 45 ST 1300 nm multimode 100 m 3281 2 km 1 2 miles 100 m 3281 2 km 1 2 miles 100 m 328ft 20 km 12 4 miles Table 2 Industrial Unmanaged Switch Part Numbers Extended Operating Temperature 40 C to 75 C Part Number Ports 1 4 10 100Base TX Port 5 100Base FX 100 m 3281 2 km 1 2 miles 100 m 328ft 2 km 1 2 miles 100 m 328ft 20 km 12 4 miles Note The distances for ports 1 and 2 listed in Tables 1 and 2 are typical maximum distances the physical characteristics of the network will affect the actual distances Table 3 Optional Accessories sold separately Part Number SPS UA12DHT xx External power supply includes 1 AC DC power supply 100 240VAC input 50 60Hz 12VDC 1 5A ouput 25 C to 70 C operating temp 1 Regional specific power cord 1 Barrel connector interface cable Note Replace the xx in the part number above with one of the following identifiers to match the region where the Industrial Switch will be installed NA North America JP Japan OZ Australia New Z
4. DIN Rail Clip attached to the rear panel Verify the clip is attached and oriented as pictured in Figure 4 below DIN Rail Clip installed Metal spring Screws 3 Back View Figure 4 Mounted DIN Rail Clip DIN rail mounting Consider the following before mounting the DIN rail to a surface and attaching the Industrial considerations Switch The surface must support at least 635g 7 4 bs for the Industrial Switch e Do not place heavy objects on the Industrial Switch A CAUTION Mount the Industrial Switch with proper spacing around it for ventilation heat dissipation Failure to observe this caution could result in damage to the Industrial Switch A CAUTION Please exercise caution when using power tools Do not install this unit in damp or wet locations or in close proximity to very hot surfaces Failure to observe this caution could result in damage to the Industrial Switch and cables Continued on next page 8 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 SISTF10xx 141 LR T Industrial Unmanaged Switch Transition Networks DIN rail mounting continued DIN rail mounting To mount the Industrial Switch to the DIN rail see Figure 5 and do the following Align and then position DIN Rail clip spring to the top of the DIN rail as shown in Figure 5 step a Press DOWN on the Industrial Switch and then IN to snap it into place on the DIN Rail See Figure 5 step b a b Me
5. TX E L LI Link Activity Copper Port 1 4 LED Full Duplex Collision Copper Port 1 4 LED 10 100Base TX UTP ports RJ 45 2 0 SISTF10XX 141 q Terminal block power inputs Figure 1 SISTF10xx 141 LR T Industrial Switch Front View Continued on next page 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 5 Transition Networks SISTF10xx 141 LR T Industrial Unmanaged Switch Physical description continued Bottom panel The bottom view of the Industrial Switch is shown in Figure 2 with corresponding descriptions listed below Grounding Screw 6 position terminal block Power Input DC24V 12 48V V2 V2 NIA V1 Vit Primary power input terminals 2 Secondary power input terminals 2 Figure 2 SISTF10xx 141 LR T Industrial Switch Bottom View Back panel The back view of the Industrial Switch is shown in Figure 3 with corresponding descriptions listed below DIN Rail Clip installed Metal spring Screws 3 Back View Figure 3 SISTF10xx 141 LR T Industrial Switch Back View 6 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 Section Il Installation In this section These are the topics DIN rail mounting oS Transition Networks SISTF10xx 141 LR T Industrial Unmanaged Switch DIN rail mounting DIN rail clip The Industrial Switch includes an aluminum
6. View Harness Figure 9 6 Position Terminal Block Primary Redundant Power Wiring Continued on next page 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 13 Transition Networks SISTF10xx 141 LR T Industrial Unmanaged Switch Connecting power to the Industrial Switch continued Terminal block wiring continued Insert the terminal block plug into the Industrial Switch s terminal block as shown in Figure 10 Front View 14 TRANSITION NETWORKS PWR FDX LNK ACT RX 100BASE FX FDX HDX 10 100BASE TX SISTF10XX 141 Figure 10 Wired Terminal Block Plug Inserted Into Industrial Switch A Terminal Block Plug Wire Harness Make sure that the DC power source is stable and clean a Turn ON the power source and the PWR LED should turn ON along with PWR 1 LED and or PWR 2 LED depending on whether one or both power supplies are connected and turned ON 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 SISTF10xx 141 LR T Industrial Unmanaged Switch Transition Networks Connecting power to the Industrial Switch continued Barrel connector barrel connector interface cable is included with the Industrial Switch and can be used to interface cable convert the barrel connector output of an external AC DC power supply over to a wire inter
7. anne nad 24 FIG Care Cal aC Fe ee ee er ee ee 24 IDET opie SC ee ee een eines en ee 24 Section gt NERRERNEBEFEPEIERE SEEENEDEFSERNENEABERFERNRTERFEHENNEEHEHERKELNERE IEERRENERELEREERTHEENEHERERFEER SUERFEHNRELEREERENERNERREFERFERR NBERFENBFFERREFEENEENEEHENE 25 TOUTS SHOOTING ea een E 25 a rer 25 II SEHON rn ee ee ee ee 25 Troubleshooting problem and Corrective action table 26 EC OT Wale ee ee ee es ee ee ee 27 Contact us Py UGLY Serra Eee 27 Compliance Monna ae een erregen 27 27 IH SEC ON T E ea vem ate es ney Sh gen ve adem E E EE 27 28 Tee ee 28 USIP VY DD GINA ee nee 28 Wep Bas BA WAN ee ee ee ee acess Renee ee 28 EEE ted E A E 28 Pe ee ae A ee ee ee E A ee 28 DU ALLAN AA E E LE ae 29 Limited MTU ee ee 29 What the warranty does not CoVer eneeeeeesnnensneennennnnennnnnnnnnnnnennnnnnnnennnnnnnnnnnnnnnnnennnnnnnnsnnnnnnnnnnsnnennnennnnnnnnn 29 Warranty 29 Who tO comact Torre a E 29 How and where to send Die returns
8. this section These are the topics Troubleshooting problem and corrective action table 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 25 Transition Networks SISTF10xx 141 LR T Industrial Unmanaged Switch Troubleshooting problem and corrective action table Potential Cause Potential Solution Industrial Switch does e Is the wired terminal block plug fully e Wire and insert the terminal block plug power up inserted into the Industrial Switch into the Industrial Switch s terminal block See pages 12 16 Is the power LED lit e Check that DC power is at the recommended levels e Contact Technical Support US Canada 1 800 260 1312 International 00 1 952 941 7600 No link or activity on the Is the power LED lit e Check that the power is turned ON UTP port 5 the UTP cable properly installed e Verify that the cable at both ends is at both ends properly inserted into the UTP port e Contact Technical Support US Canada 1 800 260 1312 International 00 1 952 941 7600 No link or activity on the Is the power LED lit e Check that the power is turned ON Fiber port e 5 the Fiber cable properly installed Verify that the cable at both ends is at both ends properly inserted into the fiber port e Contact Technical Support US Canada 1 800 260 1312 International 00 1 952 941 7600 26 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 Sect
9. 0 100Base TX to 100Base FX Industrial Unmanaged Switch This manual provides instructions on how to install configure and operate the SISTF10xx 141 LR T 10 100Base TX to 100Base FX Industrial Unmanaged Switch This manual has a beginning table of contents also at the beginning of each section there is a table of contents As you traverse the manual note the side headings These side headings make it easier to find specific information The manual sections are as follows Section Description O O S O Industrial Switch general description ordering information package contents and physical features description Il Installation and operation of the Industrial Switch IIs Advanced features Cable Specifications Troubleshooting VI Contacting Transition Networks product warranty and product compliance information Appendix A Presents product specifications notices and warnings 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 SISTF10xx 141 LR T Industrial Unmanaged Switch Transition Networks Cautions and warnings Cautions and warnings Cautions Make sure that you read and understand all content identified by these two symbols Cautions and warnings appear here and throughout this manual where appropriate Failure to read and understand the information identified by the caution and warning symbols could result in poor equipment performance damage to eq
10. 312 x 579 or 952 941 7600 x 579 e All messages will be answered within one hour Send the defective product postage and insurance prepaid to the following address CSI Material Management Center c o Transition Networks 6103 Blue Circle Drive Minnetonka MN 55343 U S A Attn RETURNS DEPT Credit Return Authorization CRA or Return Material Authorization RMA Failure to protect the product during shipping may void this warranty The return authorization number must be written on the outside of the carton to ensure its acceptance We cannot accept delivery of any equipment sent to us without a CRA or RMA number Continued on next page 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 29 Transition Networks SISTF10xx 141 LR T Industrial Unmanaged Switch Warranty continued Customer pays non compliant return costs Non warranty repair costs Repaired non warranty products This warranty is your only remedy 30 The customer must pay the non compliant product s return transportation cost to Transition Networks for evaluation of said product s for repair or replacement Transition Networks will pay for shipping the repaired or replaced in warranty product s back to the customer any and all customs charges tariffs or and taxes are the customer s responsibility Before making any non warranty repair Transition Networks requires a 200 charge plus actual shipping costs to and from t
11. 41 LR SISTF1011 141 LRT SISTF1013 141 LR SISTF1013 141 LRT SISTF1014 141 LR SISTF1014 141 LRT This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at the user s own expense This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the radio interference regulations of the Canadian Department of Communications Le pr sent appareil num rique n met pas de bruits radioelectriques d passant les limites applicables aux appareils numeriques la Class A prescrites dans le Reglement sur le brouillage radio lectrique dict par le ministere des Communications du Canada CUATION This is a Class A product In a domestic environment this product could cause radio interference in which case the user may be required to take adequate corrective measures Achtung Dieses ist Ger t der Funkst rgrenzwertklas
12. DC power supply with barrel connector u Figure 11 Barrel Connector Interface Cable with external power supply Barrel Connector Interface Cable 8 Plug external AC DC power supply into an external power source Turn ON or plug in the external power supply and the PWR LED should turn ON along with PWR 1 LED and or PWR 2 LED depending on whether one or both power supplies are connected and turned ON 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 15 Transition Networks Connecting Fiber cable installation 16 SISTF10xx 141 LR T Industrial Unmanaged Switch fiber cables When connecting fiber cables to the 1OOBASE FX port on the Industrial Switch make sure the correct type is used ST or SC To install the fiber cables do the following Step Remove and keep the fiber port protective dust cover s Note When not connected to a fiber cable keep the protective cover s on the optical ports to protect the optics and keep dust and debris from entering the optical interface Check that the fiber connectors on the fiber optic cabling are clean If necessary clean the fiber connectors using locally accepted cleaning procedures Note Dirty fiber connectors on fiber optic cables will impair light transmission quality through the cable and lead to degraded performance on the port Connect the fiber cable as shown in Figure 12 RX TX aa Device Device Fig
13. NSITION NETWORKS o TR SISTF10xx 141 LR T 10 100Base TX to 100Base FX Industrial Unmanaged Switch Installation Manual Rev A 5 July 2007 Transition Networks Table of Contents Trademark copyright and product classification information ccccccccccceeeeeeeceeeeeeeeseeeeeeeesaaeeeeeeseaeeeeeesaanes iii 11 A SA WERNE SEEN E ete asieoes asauaseciaanconaaseneseaseausesecadwanaasteaceecaseneensacsseseesdvacseeenarmeasnene iii Copyright SI ION ete ces nenne ge iii FE WANN ne ae ee ee na ee nee ee iii CE a ee een ee ee ee ee en iii A DouttHs product and Ta DA ee ee ehe 17 ea ee IV WS NS Oe O E E E N IV About this manual uus222u0ssssnnennnnnennnnnnnnnnnnnonnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnennnnnnnnnnnnnnnnennennnnnnnnnnn 17 Is a eee een T TA eee as IV EAUlIORS SG WANN OS ze een ee ee V Cautions and WARS ee er een V TOS e een ee ee V UN O aee een ee vi Seo i S EE E E A E NEEE E E E E EEA E AAE ATE E 1 SISTF10xx 141 industrial Unmanaged SWileh anne 1 SEC 7 nee E ee ee E eins er 1 OMEN EE EEE IE NELLA E E EE A E T 2 REINE Eee 2 Fe e ee a een 2 SISTF10xx 141 Industrial Unmanage
14. ble Twisted Pair t 5 Twisted Pair 1 Twisted Pair 2 _ 7 Twisted Pair 2 Figure 14 Straight Through and Crossover Cables Note AutoCross feature determines the characteristics of the cable connection and automatically configures the unit to link up regardless of the cable configuration allowing either straight through MDI or crossover MDI X cables to be used Requires no operator intervention See Advanced Features section for more information 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 17 Transition Networks SISTF10xx 141 LR T Industrial Unmanaged Switch DIP Switches DIP switch The Industrial Switch features one DIP switch on the front panel used to configure the fiber position port for use in a particular network setting Figure 15 shows the DIP switch and a chart that descriptions explains each setting ON gt Half duplex Full duplex Fiber Port 5 Half duplex ON Full duplex OFF Figure 15 Dip Switch Setting and Explanation 4 CAUTION DIP switch changes will not become active until the Industrial Switch is power cycled turned OFF then ON 18 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 SISTF10xx 141 LR T Industrial Unmanaged Switch Transition Networks Light Emitting Diodes LEDs LEDs The Industrial Switch has LED indicators located on its front panel The LEDs present at a glance net
15. ccccccccssssseeeceeeeeeeeeeeeceeeeeseeeeeeeeeeecseeseeeeeeeeseseeeeeeeeeeessaeaseeeeeeesseeeeeseeeensaaas 17 Copper cable Cr UU raO een 17 DA WICE eee ee ee a res ee ee ee ine 18 DIP switch positon GESEHN PT ODE ee ee ee 18 EMI ING Diodes LEDS I ee ee ge 19 19 ee ee E 20 Advanced FO I 20 DUTTON ee ee ee ee ee een 20 Io 6 EINSENDEN HE EINEN E A E E E O E E 20 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 Transition Networks SISTF10xx 141 LR T Industrial Unmanaged Switch Advanced FeatUTOS ee et ee ee eee 21 Mar a E eee ree 21 AUIO NEGOUAUON IEEE 802 a ee een ee eingrenzen 21 Pause ERBE 002 INV ee nee ie 21 NERDERERUER E BENIEERI WENGESRSEUNEERNENENENFRICH REKIIENERTILEERDSRETRICERMENSNEIFHERERCHE 22 DELHI TUONS 22 MOU CHON e tees etre E E E E todos ceeisousenecnieoscen 22 CC 1 TE E A E E P E E E E dense cues taausedebeceecsecuesene 22 Copper RJ 45 cable ee ee 23 Copper CaO E ee ee 23 Copper cable specifications 23 RsS DINOU ee ee ee 23 Fiber cable and optic Sp cifcations a ee a ae ea ala ee
16. chnical Support 1 800 260 1312 International 00 1 952 941 7600 Appendix A Technical Specifications SISTF10xx 141 LR T specifications notices and warnings IEEE 802 3 802 802 3 EN61000 4 2 EN61000 4 3 61000 4 4 EN61000 4 5 EN61000 4 6 Environmental Compliance IEC60068 2 32 Free fall IEC60068 2 27 Shock IEC60068 2 6 Vibration Ports 1 fiber port single mode multi mode 4 RJ 45 port Fiber Optic Specifications 1300 nm Multimode power min 20 0 dBm 14 0 dBm RX power min 31 0 dBm max 0 0 dBm Link budget 11 0dB 1310 nm Single mode power min 15 0 dBm 8 0 dBm RX power min 32 0 dBm 0 0 dBm Link budget 19 0dB Max Distance Fiber multimode up to 2km 1 2 miles Fiber single mode up to 20km 72 4 miles Copper up to 100 meters 328 ft Copper 10Mb s or 100Mb s 14 880 pps 10Mb or 148 800 pps 100Mb Input Power 12 to 48 VDC 0 2A 0 7A dual redundant auto sensing inputs with reverse polarity and overload current protection Dimensions Width 2 1 54 mm Height 5 3 135 mm 0 64 kg 1 4 Ibs Shipping weight 0 90 kg 2 Ibs LR models only LRT models only Storage Temperature 40 C to 85 C 40 F to 185 F Operating Humidity 5 to 90 non condensing Transition Networks SISTF10xx 141 LR T Industrial Unmanaged Switch SISTF10xx 141 LR T specifications notices and warnings continued Notices e The i
17. cts and configures the twisted pair port on the converter to the correct MDI or MDI X configuration allowing either straight through MDI or crossover MDI X cables to be used see figure 17 No user intervention is required Eliminates an entire category of troubleshooting No need to identify cable type straight through or crossover No user intervention required to determine correct button switch settings Straight Through Cable Crossover Cable Twisted Pair 1 Twisted Pair 1 Twisted Pair 2 Twisted Pair 2 Figure 17 Straight Through and Crossover Cables Auto Negotiation Auto Negotiation allows devices to perform automatic configuration to achieve the best IEEE 802 3u possible mode of operation over a link The Industrial Switch will broadcast its 10Mbps 100Mbps and duplex half full capabilities to other devices and negotiate the best mode of operation between the two devices No user intervention required to determine best mode of operation Optimal link established automatically Quick and easy installation Note Ifthe Industrial Switch is connected to a non negotiating device over the copper link it will default to 10Mb s speed half duplex mode Pause PAUSE signaling is an IEEE feature that is used to temporarily suspend data transmission IEEE 802 3xy between two devices in the event that one of the devices becomes overwhelmed In the event that a device n
18. d Switch part numbers 3 nee ee 3 PACKE CON ps ee een are ee een ee 4 Package TUS ee nee ee eigen 4 RY SIC AL OS SC UOTE sense ee ee een 5 Physical diMensiONS east 5 FPO MPO U AE OEE E E E E E EE EN E EEN 5 BOWO DANOI ee OR 6 BACK ee ei 6 OO Me nn ee ee E ee ae een een 7 IE AH ALOE ee ee ee ee een 7 EEE E A E E EEE ETE E EEE 7 ee E ee ee gene 8 DIR FA E ne ee ee 8 DIN rail mounting nn ee ee seen 8 DIN TAU ee ee E en ee ee ee 9 AU near ee peu ee 10 Wall OU CRG ee ee er ae ee 10 Wall mount Ce 10 Grounding the Industrial Switch ccccccccccseeeeeceeeeecaeeeeeeceeeeesaeeeeeceeeeeeseeeeeeeeeeesseaeseseeeessseeaseeeeeeeessaeaneeeeeees 11 Wining COWS TS NN een nenne een 11 lore Wisi el SWIICH ee nee en 11 Connecting power to the Industrial Switch une 12 Redundant power een ee en Ense 12 Ue 21 WV IMIG serienr E Ee E E E EERE 13 Barrel connector interlace Ballen ee mee oe ae eee nero PEE ne en R 15 OMe cino DeO a ee res 16 FIDE PCa Die instalatii nennen ae 16 Connecting copper cables 17 Copper Cable installation cccc
19. de fiber 100 140 85 140 50 125 um Fiber optic The following shows the fiber optic specification specifications Fiber Cable Specifications SISTF1011 141 LR T 1300 nm multimode Fiber optic transmitter power min 20 0 dBm max 14 0 dBm Fiber optic receiver sensitivity min 31 0 dBm 0 0 dBm Link budget 11 0dB SISTF1013 141 LR T 1300 nm multimode Fiber optic transmitter power min 20 0 dBm max 14 0 dBm Fiber optic receiver sensitivity 30 0dBm max 0 0 dBm Link budget 11 0dB SISTF1014 141 LR T 1310 nm single mode in 15 0 dBm max 8 0 dBm Fiber optic transmitter power an Fiber optic receiver sensitivity or DEN MAL Link budget i Note The fiber optic transmitters on this device meet Class Laser safety requirements per IEC 825 CDRH standards and comply with 21CFR1040 10 and 21CFR1040 11 24 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 SISTF10xx 141 LR T Industrial Unmanaged Switch Transition Networks Section V Troubleshooting Introduction This section provides basic troubleshooting information for the Industrial Switch via a problem and corrective action table The problems are stated in the problem column and the action s to take for the problem is stated in the corrective action column If the corrective measures listed do not correct the problem contact our 24 Hour Technical Support department at 1 800 260 1312 International 00 1 952 941 7600 In
20. devices pursuant to part 15 of FCC rules These limits are designed to provide reasonable protection against harmful interference in a commercial installation This equipment generates uses and radiates radio frequency energy therefore if it is not installed and used in accordance with the instructions in this document could cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference the user will be required to correct the interference at the user s own expense CE Mark CE CE Marking European Conformity This is a Class A product In a domestic environment this product could cause radio interference as a result the user may be required to take adequate preventative measures 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 iii Transition Networks SISTF10xx 141 LR T Industrial Unmanaged Switch About this product and manual Industrial Switch Term usage About this manual Manual structure The SISTF10xx 141 LR T Industrial Unmanaged Switch provides four 10 100Base TX RJ 45 copper connections and a 100Base FX fiber connection These switches are hardened devices designed to reliably operate in harsh environments such as those found on factory floors outdoor enclosures or other hazardous environments In this manual the term Industrial Switch first letter upper case refers to the SISTF10xx 141 LR T 1
21. e Industrial Switch to a DC power source See Figure 7 O O O O OOOO oO O00 0 Power Input DC24V 12 48V V2 V2 N A Vi Vit Figure 7 Industrial Switch Ground Screw Bottom Panel 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 11 Transition Networks SISTF10xx 141 LR T Industrial Unmanaged Switch Connecting power to the Industrial Switch Redundant The Industrial Switch has dual redundant power inputs capable of auto sensing the input power inputs voltage while providing over current protection and reverse polarity protection The dual power inputs can be connected simultaneously to live DC power sources See Figure 8 If one power source fails the other live source acts as a backup and automatically supplies the Industrial Switch with power 00000000 00000000 00000000 OO OO O00 amp oO PWR2 PWR1 4 4 ARARAR V2 V2 N A Vi Vit Power Input DC24V 12 48V Power Input 2 Power Input 1 Figure 8 Redundant Power Connections IMPORTANT e Power is supplied through an external 12 48 VDC power source Check the Technical Specification section for details about the DC power input voltage e The Industrial Switch does not include a power switch therefore plugging a wired and active terminal block plug into its terminal block will immediately power ON the unit A CAUTION Before connecting the Industrial Switch
22. e terminal block of the Industrial Switch Failure to observe this caution could result in damage to the equipment CAUTION This is a Class A product In a residential environment this product could cause radio interference in which case the user may be required to take adequate corrective measures Continued on next page 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 Transition Networks SISTF10xx 141 LR T Industrial Unmanaged Switch Cautions and warnings continued Warnings Warnings indicate the possibility of injury to persons A WARNING Be sure to disconnect power before installing and wiring the Industrial Switch Failure to observe this warning could result in an electrical shock A WARNING Fiber optics Visible and invisible laser radiation when open DO NOT stare into the beam or directly view the beam with optical instruments Failure to observe this warning could result in an eye injury or blindness A WARNING Use of controls adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure vi 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 Section SISTF10xx 141 Industrial Unmanaged Switch In this section These are the topics General description 2 SISTF10xx 141 Industrial Unmanaged Switch model numbers Package Contents Physical Description Transition Networks SISTF10xx 141 LR T
23. ealand UK United Kingdom EU Europe SA South Africa 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 3 Transition Networks SISTF10xx 141 LR T Industrial Unmanaged Switch Package contents Package Quantity Description contents 1 10 100BaseTX to 100BaseFX Industrial Unmanaged Switch DIN Rail mounting bracket installed One wall mount plate Screws for attaching wall mount bracket Installation manual CD Barrel connector interface cable For external AC DC power supply sold separately lt 3 _ Compare the package contents of your industrial Switch with the standard checklist above If any item is damaged or missing please contact Transition Networks Technical Support 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 SISTF10xx 141 LR T Industrial Unmanaged Switch Transition Networks Physical description Physical Width 2 1 54mm dimensions Height 5 3 135mm Depth 4 1 105mm Front panel The front panel of the Industrial Switch is shown in Figure 1 with corresponding descriptions listed below TRANSITION NETWORKS Secondary power input 2 LED Primary power input 1 LED Power LED LNK ACT itch Link Activity Fiber Port 5 LED Full Duplex Collision Fiber Port 5 LED 100Base FX fiber port Industrial S 100BASE FX FDX HDX Full duplex Half duplex Fiber Port 5 DIP switch 10 100BASE
24. eeds some time to clear network congestion it will send out a PAUSE signal to the other end device which will then wait a pre determined amount of time before re transmitting the data Transition s converters will pass PAUSE signaling unhindered ensuring that the message is delivered to the end device PAUSE enabled devices allowed to work properly Prevents loss of valuable data transmission Reduces bottlenecks and allows for efficient use of network devices Note PAUSE signaling is not standardized over fiber media Transition s Industrial Switchs will communicate this signaling over fiber between the converters to pass this signaling on to the other end device 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 21 Transition Networks SISTF10xx 141 LR T Industrial Unmanaged Switch Section IV Cable Specifications Introduction This section provides copper and fiber cable specifications In this section These are the topics UTP cable specifications Fiber cable and optic specifications 22 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 SISTF10xx 141 LR T Industrial Unmanaged Switch Transition Networks Copper RJ 45 cable specifications Copper cabling Copper cable specifications RJ 45 pinouts Shielded twisted pair STP or unshielded twisted pair UTP cabling may be used and can be configured as either Straight through or crossover see figure 18 St
25. face that can then be inserted into the terminal block following the instructions and figure 9 both located on page 13 of this manual Note external AC DC power supply is not included with the Industrial Switch Transition Networks offers an accessory power supply that can be purchased separately if required Please see optional accessories in the general information section of this manual for ordering information 4 CAUTION The operating temperature of the Industrial Switch when used in conjunction with an AC DC power supply will be limited to the lesser operating temperature range of either device For example SISTF10xx 141 LRT 40 C to 75 C operating temp used with SPS UA12DHT xx 25 C to 70 C operating temp Operating temp for combination is 25 C to 70 C _ Step Action SSS SS SS Locate the barrel interface cable included in the Industrial Switch packaging Strip the power wires as required 3 Insert one stripped power wire into the terminal block plug Observe polarity See Figure 9 on page 13 Secure the wire using a flathead screwdriver by tightening the contact screw See Figure 9 on page 13 Repeat Steps 3 and 4 until all wires are installed and secured Locate an external AC DC power supply with barrel connector interface and make sure the power supply is not plugged into any power source Insert barrel connector into the receptacle on the interface cable See Figure 11 External AC
26. he warranty does not cover Warranty Service Who to contact for returns How and where to send the returns Effective for products shipped May 1 1999 and after every Transition Networks labeled product will be free from defects in material and workmanship for its lifetime This warranty covers the original user only and 15 not transferable This warranty does not cover damage from accident acts of God neglect contamination misuse or abnormal conditions of operation or handling including over voltage failures caused by use outside the product s specified rating or normal wear and tear of mechanical components If the user is unsure of the proper means of installing or using the equipment contact Transition Networks free technical support services Transition Networks will at its option e Repair the defective product to functional specification at no charge e Replace the product with an equivalent functional product e Refund the purchase price of a defective product To return a defective product for warranty coverage contact Transition Networks technical support department for a return authorization number RAN Transition s technical support department can be reached through any of the following means Technical Support is available 24 hours a day e Tel 800 260 1312 x 200 or 952 941 7600 x 200 e Fax 952 941 2322 e Email techsupport transition com e Live web chat Transition Now e Voicemail 800 260 1
27. he customer If the repair is greater than 200 an estimate is issued to the customer for authorization of repair If no authorization is obtained or the product is deemed not repairable Transition Networks will retain the 200 service charge and return the product to the customer not repaired Non warranted products repaired by Transition Networks for a fee will carry a 180 day limited warranty All warranty claims are subject to the restrictions and conventions set forth by this document Transition Networks reserves the right to charge for all testing and shipping incurred if after testing a return is classified as No Problem Found This warranty is your only remedy No other warranties such as fitness for a particular purpose are expressed or implied Transition Networks is not liable for any special indirect incidental or consequential damages or losses including loss of data arising from any cause or theory Authorized resellers are not authorized to extend any different warranty on Transition Networks behalf 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 SISTF10xx 141 LR T Industrial Unmanaged Switch Transition Networks Compliance information Compliances UL Listed C UL Listed Canada FCC Regulations Canadian Regulations European Regulations CISPR22 EN5022 Class A 55024 EN60950 Class A FCC Class A CE Mark The following part numbers are UL Listed SISTF1011 1
28. ion VI Contact Us Warranty amp Compliance Information Introduction This section explains how to contact Transition Networks via Phone fax email and direct mail It also explains e What the warranty covers e Who to contact to return product e How and where to return the product e Industry standards compliance In this section These are the topics Contact us Warranty Compliance information Transition Networks Contact us Technical support Live Web chat Web based training E Mail Address 28 SISTF10xx 141 LR T Industrial Unmanaged Switch Technical Support is available 24 hours a day United States 1 800 260 1312 International 00 1 952 941 7600 Chat live the Web with a Transition Networks Technical Support Specialist Log onto www transition com and click the Transition Now link Transition Networks provides 8 10 seminars per month via live web based training Log onto www transition com and click the Learning Center link Ask a question anytime by sending an e mail message to our technical support staff at techsupport transition com Transition Networks 6475 City West Parkway Minneapolis MN 55344 U S A Telephone 952 941 7600 Toll free U S A amp Canada 800 526 9267 Fax 952 941 2322 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 SISTF10xx 141 LR T Industrial Unmanaged Switch Transition Networks Warranty Limited lifetime warranty What t
29. nformation in this user s guide is subject to change For the most up to date information on the SISTF10xx 141 LR T Industrial Unmanaged Switch please refer to the guide on line at www transition com e Product is certified by the manufacturer to comply with DHHS Rule 21 CFR Subchapter J applicable at the date of manufacture e IMPORTANT Copper based media ports e g Twisted Pair TP Ethernet USB RS 232 RS422 RS485 DS1 DS3 Video Coax etc are intended to be connected to intra building inside plant link segments that are not subject to lightening transients or power faults Copper based media ports e g Twisted Pair TP Ethernet USB RS 232 RS 422 RS 485 DS1 DS3 Video Coax etc are NOT to be connected to inter building outside plant link segments that are subject to lightening transients or power faults Failure to observe this caution could result in damage to equipment Warnings WARNING Visible and invisible laser radiation when open not stare into the beam or view the beam directly with optical instruments Failure to observe this warning could result in an eye injury or blindness WARNING Use of controls adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure 34 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600
30. raight Through Cable Crossover Cable Twisted Pair 1 Ls Twisted Pair 1 Twisted 2 1312 Twisted Pair 2 _ Figure 18 Straight Through and Crossover Cables Note AutoCross feature determines the characteristics of the cable connection and automatically configures the unit to link up regardless of the cable configuration allowing either straight through MDI or crossover MDI X cables to be used Requires no operator intervention See Advanced Features section for more information Wire category Category 5 minimum Attenuation 22 0 dB 100 100 MHz Gauge 24 to 22 AWG Maximum cable distance 100 meters 328 ft Figure 19 shows the RJ 45 connector pin assignment chart No MDI Signal Name MDI X Signal Name Receive Data RD Transmit Data TD Receive Data RD Transmit Data TD Transmit Data TD Receive Data RD 6 Transmit Data TD Receive Data RD Figure 19 RJ 45 Connector Pin Assignment Chart Note The Industrial Switch is configured as a MDI X device 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 23 Transition Networks SISTF10xx 141 LR T Industrial Unmanaged Switch Fiber cable and optic specifications Fiber cable Cable physical characteristics must meet or exceed IEEE 802 3 specifications characteristics Parameter Specification Bit Error Rate 10 Single mode fiber 9 um Multimode fiber 62 5 125 um Multimo
31. se A In Wohnbereichen k nnen bei Betrieb dieses Ger tes Rundfunkst rungen auftreten In diesem F ll ist der Benutzer f r Gegenma nahmen verantwortlich Attention Ceci est un produit de Classe A Dans un environment domestique ce produit risque de des interf rences radio lectriques il appartiendra alors l utilsateur de prende les measures sp cifiques appropri es 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 31 32 Transition Networks SISTF10xx 141 LR T Industrial Unmanaged Switch European Regulations continued In accordance with European Union Directive 2002 96 EC of the European Parliament and of the Council of 27 January 2003 Transition Networks will accept post usage returns of this product for proper disposal The contact information for this activity can be found in the Contact Us portion of this document reer CAUTION connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK Failure to observe this caution could result in damage to the public telephone network Der Anschluss dieses Ger tes an ffentlickes Telekommunikationsnetz in den EG Mitgliedstaaten verst sst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91 263 EWG zur Angleichung der Rechtsvorschriften der Mitgliedstaaten Uber Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer Konformit t 24 Hour Te
32. t to Industrial Switch 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 SISTF10xx 141 LR T Industrial Unmanaged Switch Transition Networks Grounding the Industrial Switch A CAUTION Be sure to disconnect the Industrial Switch from the DC power source before installing and wiring the device Wiring The following wiring considerations are recommended considerations Signal lines must not be directly connector to outdoor wiring e Use separate paths or conduits to route wiring for power and device data cables To avoid interference wires with different signal characteristics route separately If power wiring and device data cables must cross make sure that the wires are perpendicular at the intersection point e Use the type of signal transmitted through a wire to determine which wires should be kept separate The rule of thumb is wiring that shares similar electrical characteristics can be bundled together e Keep input and output wiring separated 4 CAUTION The Industrial Switch is intended to be grounded to a well grounded mounting surface such as a metal plate Install the grounding wire prior to connecting any other device to the Industrial Switch Industrial Switch Grounding the Industrial Switch helps limit the effects of noise due to electromagnetic grounding interference EMI via proper grounding Always run the ground connection from the ground screw to a grounding surface before connecting th
33. tal Metal Spring 5 gt DIN Rail DIN Rail Correct Installation Figure 5 Industrial Switch Mounting to DIN Rail 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 9 Transition Networks SISTF10xx 141 LR T Industrial Unmanaged Switch Wall mounting Wall mount The Industrial Switch includes a wall mount bracket and screws in the contents of the shipping bracket package The wall mount bracket can be attached to the rear panel of the Industrial Switch to enable mounting to a vertical surface such as the wall of an enclosure Locate the bracket 1 and screws 6 and follow the steps below to install the bracket on the Industrial Switch Wall mount To install the wall mount bracket to the Industrial Switch see Figure 6 and do the following bracket install 10 1 Remove existing screws 3 and DIN Rail bracket from rear of Industrial Switch 1 2 3 Locate wall mount bracket and screws 6 from Industrial Switch packaging Place bracket in correct orientation as shown and insert and tighten screws to secure bracket to rear of Industrial Switch Mount assembled device to a wall per locally accepted practices for anchoring and securing Wall mount screws not included Locate wall mount Screw bracket onto rear brackets and screws of Industrial Switch Remove screws and DIN rail bracket mg D ae SE bk Figure 6 Installing wall mount bracke
34. to a DC power source ensure the power source is stable A CAUTION This device is intended to be supplied by a listed power source marked LPS or Limited Power Source provided with a connector for field wiring terminal A CAUTION This device is designed for operation with a safety extra low voltage SELV in compliance with IEC950 EN60950 VDE0805 and in compliance with the low voltage directive 73 23 EEC and 93 68 EEC Continued on next page 12 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 SISTF10xx 141 LR T Industrial Unmanaged Switch Transition Networks Connecting power to the Industrial Switch continued Note The terminal block can accept 12 24 AWG wire for power and alarm relay inputs Terminal block To wire the 6 position terminal block for redundant power do the following wiring Note The 6 position terminal block plug is constructed keyed to mate with the Industrial Switch terminal block When wiring the plug for power use the polarity markings next to the terminal block and on top of the plug to ensure proper connection Turn the external power source OFF Strip the power wires as required See Figure 9 See Figure 9 Repeat Steps 3 and 4 until all wires are installed and secured Terminal Block Plug 3 Views Primary Power Screw Contacts Secondary Power Screw Contacts Contact Screw Wire Ports View Plug End Stripped Power Wires Side
35. uipment or injury to persons Cautions indicate the possibility of damage to equipment A CAUTION Make sure that the Industrial Switch is mounted with proper space around it for ventilation heat dissipation Failure to observe this caution could result in damage to the Industrial Switch CAUTION Please exercise caution when using power tools Do not install this unit in damp or wet locations or in close proximity to very hot surfaces Failure to observe this caution could result in damage to the Industrial Switch and cables CAUTION Only qualified persons should install the Industrial Switch Failure to observe this caution could result in poor performance or damage to the Industrial Switch CAUTION Install the Industrial Switch in an environment where the temperature range will not exceed the stated environmental specifications for the particular model being installed Failure to observe this caution could result in permanent damage to the Industrial Switch CAUTION DO NOT install the Industrial Switch in areas where strong electromagnetic fields EMF exist Failure to observe this caution could result in poor Industrial Switch performance and data corruption A CAUTION The Industrial Switch must be mounted to a well grounded surface Failure to observe this caution could result in EMI problems CAUTION When connecting DC power wires to the terminal block plug pay close attention to the polarity markings shown near th
36. ure 12 Fiber Cable Connections 4 Check the corresponding fiber port LED on the Industrial Switch to verify the connection LNK ACT LED should be lit Warning Visible and invisible laser radiation when open DO NOT stare into the beam directly view the beam with optical instruments Failure to observe this warning could result in an eye injury e Use of controls adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 SISTF10xx 141 LR T Industrial Unmanaged Switch Transition Networks Connecting copper cables Copper cable To connect the copper cable to the Industrial Switch and other equipment do the following installation 1 Locate or build 10Base T or 100Base TX copper cables with male RJ 45 connectors installed at both ends 2 Connect the RJ 45 connector at one end of the cable to the RJ 45 port the Industrial Switch See Figure 13 below 3 Connect the RJ 45 connector at the other end of the cable to the RJ 45 on the other device switch workstation PLC etc 4 Check the copper port LED on the Industrial Switch to verify the connection LNK ACT LED should be lit 5 Figure 13 Copper Cable Installation Copper cable Either a straight through or cross over cable may be used See Figure 14 configuration Straight Through Cable Crossover Ca
37. work status and provide real time connectivity information Figure 16 shows the LEDs and a chart that explains the function of each TRANSITION NETWORKS PWR Green input power present on either of the power inputs PWR1 Green input power present on PWR1 input PWR2 Green input power present on PWR2 input LNK ACT Green fiber link Fiber port Green blinking fiber port is receiving link pulses or data from a 100BASE FX 100Base FX compliant port FDX HDX FDX COL Orange Full duplex Fiber port 5 Off Half duplex or no device attached Orange blinking Collisions occurring LNK ACT Green UTP link 10 100 5 UTP ports 1 4 Green blinking UTP port IS receiving link pulses data from a 10 100Base TX compliant port Off No device attached FDX Orange Full duplex UTP ports 1 4 Off Half duplex or no device attached Orange blinking Collisions occurring Industrial Switch Figure 16 LEDs and Description Chart 24 Hour Technical Support 1 800 260 1312 International 00 1 952 941 7600 19 Section Ill Advanced Features Introduction This section provides an explanation of the advanced features on the Industrial Switch In this section These are the topics AutoCross 21 Auto Negotiation Pause SISTF10xx 141 LR T Industrial Unmanaged Switch Transition Networks Advanced Features AutoCross AutoCross automatically dete
Download Pdf Manuals
Related Search