Home

TP-Link TL-SG5428 CLI Reference Guide

Contents

1. emonth eday etime offset Parameter smonth Month to start with the options Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec sday Day to start ranging from 1 to 31 Please mind that the number of days depends on the month stime Time to start in the format of hh mm emonth Month to end with the options Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec eday Day to end ranging from 1 to 31 Please mind that the number of days depends on the month etime Time to end in the format of hh mm offset Specify the time adding in minutes when Daylight Saving Time comes The value ranges from 1 to 1440 and the default value is 60 minutes It is optional Command Mode Global Configuration Mode Example 4s Configure the DST start time as 00 00 am on April 1 the end time as 00 00 am on October 1 and the offset as 30 minutes TL SG5428 config system time dst date Apr 1 00 00 Oct 1 00 00 30 system time dst recurring Description The system time dst recurring command is used to specify the DST configuration in recurring mode This configuration is recurring in use The time period is restricted to be within one year 110 Syntax system time dst recurring sweek sday smonth stime eweek eday emonth etime offset Parameter sweek Week to start with the options first second third fourth
2. Example Display the LLDP statistic information of port 1 TL SG5428 show Ildp traffic interface gigabitEthernet 1 0 1 217 Chapter 31 Cluster Commande Cluster Management function enables a network administrator to manage the scattered devices in the network via a management device After a commander switch is configured management and maintenance operations intended for the member devices in a cluster is implemented by the commander device cluster ndp Description The cluster ndp command is used to configure NDP globally To return to the default configuration please use no cluster ndp command NDP Neighbor Discovery Protocol is used to discover the information of the directly connected neighbor devices to support cluster establishing An NDP enabled device sends NDP packets regularly to neighbor devices as well as receives NDP packets from neighbor devices An NDP packet carries the aging time which indicates the period of the receiving devices to keep the NDP packet Syntax cluster ndp cluster ndp timer hello hello time aging aging time no cluster ndp no cluster ndp timer hello hello time aging aging time 1 Parameter hello time Hello Time which is the interval to send NDP packets Hello Time ranges from 5 to 254 in seconds By default it is 60 Hello Time should be smaller than Aging Time aging time Aging Time which is the period for the neighbor switch to keep the NDP packets
3. Add the switch whose MAC address is 00 74 5D 61 67 48 to the cluster TL SG5428 config cluster member mac address 00 74 5D 61 67 48 cluster candidate Description The cluster candidate command is used to specify the current switch as candidate switch Syntax cluster candidate Command Mode Global Configuration Mode Example Specify the current switch as candidate switch TL SG5428 config cluster candidate cluster individual Description The cluster individual command is used to specify the current switch as individual switch 223 Syntax cluster individual Command Mode Global Configuration Mode Example Specify the current switch as individual switch TL SG5428 config cluster individual show cluster ndp Description The show cluster ndp command is used to display NDP configuration of certain ports Syntax show cluster ndp interface gigabitEthernet port Parameter port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the NDP global configuration TL SG5428 show cluster ndp Display the NDP configuration of all Ethernet ports TL SG5428 show cluster ndp interface Display the NDP configuration of port 2 TL SG5428 show cluster ndp interface gigabitEthernet 1 0 2 show cluster ntdp Description The show cluster ntdp command is used to display NTDP configuration or the information of device collected through NTD
4. TL SG5428 config show gvrp interface gigabitEthernet 1 0 2 45 Chapter9 Etherchannel Commands Etherchannel Commands are used to configure LAG and LACP function LAG Link Aggregation Group is to combine a number of ports together to make a single high bandwidth data path which can highly extend the bandwidth The bandwidth of the LAG is the sum of bandwidth of its member port LACP Link Aggregation Control Protocol is defined in IEEE802 3ad and enables the dynamic link aggregation and disaggregation by exchanging LACP packets with its partner The switch can dynamically group similarly configured ports into a single logical link which will highly extend the bandwidth and flexibly balance the load channel group Description The channel group command is used to add a port to the EtherChannel Group and configure its mode To delete the port from the EtherChannel Group please use no channel group command Syntax channel group num mode on active passive no channel group Parameter num The number of the EtherChannel Group ranging from 1 to 14 on Enable the static LAG active Enable the active LACP mode passive Enable the passive LACP mode Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Add ports 2 4 to EtherChannel Group 1 and enable the static LAG TL SG5428 config interface range gigabitEthernet 1 0 2 4 TL SG5
5. The destination IP address mask It is required if you typed the destination IP address time segment The time range for the rule to take effect By default it is not limited dscp Specify the dscp value ranging from 0 to 63 s port The source port number d port The destination port number tcpflag Specify the flag value when using TCP protocol protocol Configure the value of the matching protocol 157 rule Command Mode Global Configuration Mode Example Create an Extended IP ACL whose ID is 220 and add Rule 10 for it In the rule the source IP address is 192 168 0 100 the source IP address mask is 255 255 255 0 the time range for the rule to take effect is tRange1 and the packets match this rule will be forwarded by the switch TL SG5428 config access list create 220 TL SG5428 config access list extended 220 rule 10 permit sip 192 168 0 100 smask 255 255 255 0 tseg tRange1 Description The rule command is used to configure MAC ACL rule To delete the corresponding rule please use no rule command rule rule id deny permit smac source mac smask source mac mask dmac destination mac dmask destination mac mask vid vlan id type ethernet type pri user pri tseg time segment no rule rule id Parameter rule id The rule ID deny The operation to discard packets permit The operation to forward pac
6. TimeZone for Cairo Athens Bucharest Amman Beirut Jerusalem UTC 03 00 TimeZone for Kuwait Riyadh Baghdad UTC 03 30 TimeZone for Tehran UTC 04 00 TimeZone for Moscow St Petersburg Volgograd Tbilisi Port Louis UTC 04 30 TimeZone for Kabul UTC 05 00 TimeZone for Islamabad Karachi Tashkent UTC 05 30 TimeZone for Chennai Kolkata Mumbai New Delhi UTC 05 45 TimeZone for Kathmandu UTC 06 00 TimeZone for Dhaka Astana Ekaterinburg UTC 06 30 TimeZone for Yangon Rangoon UTC 07 00 TimeZone for Novosibrisk Bangkok Hanoi Jakarta UTC 08 00 TimeZone for Beijing Chongqing Hong Kong Urumai Singapore UTC 09 00 TimeZone for Seoul Irkutsk Osaka Sapporo Tokyo UTC 09 30 TimeZone for Darwin Adelaide UTC 10 00 TimeZone for Canberra Melbourne Sydney Brisbane UTC 11 00 TimeZone for Solomon Is New Caledonia Vladivostok UTC 12 00 TimeZone for Fiji Magadan Auckland Welington UTC 13 00 TimeZone for Nuku alofa Samoa ntp server The IP Address for the Primary NTP Server backup ntp server The IP Address for the Secondary NTP Server fetching rate Specify the rate fetching time from NTP server 108 Command Mode Global Configuration Mode Example Configure the system time mode as NTP the time zone is UTC 12 00 the primary NTP server is 133 100 9 2 and the se
7. auto authorized force unauthorized force no dot1x port control Parameter auto authorized force unauthorized force The Control Mode for the port auto In this mode the port will normally work only after passing the 802 1X Authentication authorized force In this mode the port can work normally without passing the 802 1X Authentication unauthorized force In this mode the port is forbidden working for its fixed unauthorized status Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure the Control Mode for port 1 as authorized force TL SG5428 config interface gigabitEthernet 1 0 1 TL SG5428 config if dot1x port control authorized force dot1x port method Description The dot1x port method command is used to configure the control type of IEEE 802 1X for the specified port By default the control type is mac based To restore to the default configuration please use no dot1x port method command Syntax dot1x port method mac based port based no dot1x port method Parameter mac based port based The control type for the port Mac based Any client connected to the port should pass the 802 1X authentication for access 83 port based All the clients connected to the port can access the network on the condition that any one of the clients has passed the 802 1X Authentication Command Mode I
8. ip address Description The ip address command is used to configure the system IP Address Subnet Mask and Default Gateway To restore to the factory defaults please use no ip address command This command should be configured in the Interface Configuration Mode of the management VLAN Syntax ip address ip addr ip mask gateway no ip address 113 Parameter ip addr The system IP of the switch The default system IP is 192 168 0 1 ip mask The Subnet Mask of the switch The default Subnet Mask is 255 255 255 0 gateway The Default Gateway of the switch By default it is empty Command Mode Interface Configuration Mode interface vian Example Configure the system IP as 192 168 0 69 and the Subnet Mask as 255 255 255 0 when the management VLAN of the switch is VLAN 1 TL SG5428 config interface vlan 1 TL SG5428 config if ip address 192 168 0 69 255 255 255 0 ip address alloc dhcp Description The ip address alloc dhcp command is used to enable the DHCP Client function When this function is enabled the switch will obtain IP from DHCP server This command should be configured in the Interface Configuration Mode of the management VLAN Syntax ip address alloc dhcp Command Mode Interface Configuration Mode interface vian Example Enable the DHCP Client function when the management VLAN of the switch is VLAN1 TL SG5428 config interface vlan 1 TL SG5428 config if ip address
9. jabber collision 64 65 127 128 511 512 1023 1024 10240 s type absolute delta rising threshold hold rising event index r event falling threshold Fhold falling event index f event a type rise fall all owner owner name interval interval no rmon alarm index Parameter index The index number of the Alarm Management entry ranging from 1 to 12 in the format of 1 3 5 port The Ethernet port number alarm variable The alarm variable By default the option is drop s type Sample Type which is the sampling method for the selected variable and comparing the value against the thresholds There are two options absolute and delta Absolute indicates comparing the values directly with the thresholds at the end of the sampling interval Delta indicates subtracting the 205 last sampled value from the current value and then comparing the difference in the values with the threshold By default the Sample Type is absolute r hold The rising counter value that triggers the Rising Threshold alarm ranging from 1 to 65535 By default it is 100 r event Rise Event which is the index of the corresponding event which will be triggered if the sampled value is larger than the Rising Threshold It ranges from 1 to 12 f hold The falling counter value that triggers the Falling Threshold alarm ranging from 1 to 65535 By default
10. regardless of their physical locations VLAN can enhance performance by conserving bandwidth and improve security by limiting traffic to specific domains vian Description The vlan command is used to create IEEE 802 1Q VLAN and enter VLAN Configuration Mode To delete the IEEE 802 1Q VLAN please use no vlan command Syntax vlan vian list no vlan Vian list Parameter vlan list Specify IEEE 802 1Q VLAN ID list ranging from 2 to 4094 in the format of 2 3 5 It is multi optional Command Mode Global Configuration Mode Example Create VLAN 2 10 and VLAN 100 TL SG5428 config vlan 2 10 100 Delete VLAN 2 TL SG5428 config no vlan 2 interface vlan Description The interface vlan command is used to create VLAN Interface and enter Interface VLAN Mode To delete VLAN Interface please use no interface vlan command Syntax interface vlan vian id no interface vlan v an id 18 Parameter vlan id Specify IEEE 802 1Q VLAN ID ranging from 1 to 4094 Command Mode Global Configuration Mode Example Create VLAN Interface 2 TL SG5428 config interface vian 2 name Description The name command is used to assign a description to a VLAN To clear the description please use no name command Syntax name descript no name Parameter descript String to describe the VLAN which contains 16 characters at most Command Mode VLAN Configuration Mode VLAN Example Specify the name of VLAN
11. seconds and the retries time as 100 TL SG5428 config snmp server host 192 168 0 146 162 admin smode v2c type inform retries 100 timeout 1000 198 snmp server enginelD Description Syntax The snmp server enginelD command is used to configure the local and remote enginelD of the switch To restore to the default setting please use no snmp server enginelD command snmp server enginelD local local enginelD remote remote enginelD no snmp server enginelD Parameter local enginelD Local Engine ID for local clients The Engine ID is a unique alphanumeric string used to identify the SNMP engine on the switch Its length ranges from 10 to 64 hexadecimal characters which must be even number meanwhile remote enginelD Remote Engine ID for the switch The Engine ID is a unique alphanumeric string used to identify the SNMP engine on the remote device which receives informs from the switch lts length ranges from 10 to 64 hexadecimal characters which must be even number meanwhile The snmp server enginelD will be disabled if the local and remote are both not configured Command Mode Global Configuration Mode Example Specify the local enginelD as 1234567890 and the remote enginelD as abcdef123456 TL SG5428 config snmp server enginelD local 1234567890 remote abcdef123456 snmp server traps snmp Description The snmp server traps snmp command is used to enable SNMP standard traps w
12. storm control broadcast no storm control broadcast Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the broadcast control function for port 5 TL SG5428 config interface gigabitEthernet 1 0 5 TL SG5428 config if storm control broadcast 127 storm control multicast Description The storm control multicast command is used to enable the multicast control function To disable the multicast control function please use no storm control multicast command Multicast control function allows the switch to filter multicast in the network If the transmission rate of the multicast packets exceeds the set bandwidth in the storm control rate the packets will be automatically discarded to avoid network broadcast storm Syntax storm control multicast no storm control multicast Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the multicast control function for port 5 TL SG5428 config interface gigabitEthernet 1 0 5 TL SG5428 config if storm control multicast storm control unicast Description The storm control unicast command is used to enable the unicast control function To disable the unicast control function please use no storm control unicast command Unicast control function allows the switch to filter UL frame in the network If the transmission rate of the UL frames
13. vlan id The VLAN ID selected to display Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the IGMP snooping configuration information of VLAN 2 190 TL SG5428 show ip igmp snooping vlan 2 show ip igmp snooping multi vlan Description The show ip igmp snooping multi vlan command is used to display the Multicast VLAN configuration Syntax show ip igmp snooping multi vlan Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the Multicast VLAN configuration TL SG5428 show ip igmp snooping multi vlan show ip igmp snooping groups Description The show ip igmp snooping groups command is used to display the information of all IGMP snooping groups It can be extended to some other commands to display the dynamic and static multicast information of a selected VLAN Syntax show ip igmp snooping groups vlan vian id count dynamic dynamic count static static count Parameter vian id The VLAN ID selected to display the information of all multicast items count The numbers of all multicast groups dynamic Display dynamic multicast groups dynamic count The numbers of all dynamic multicast groups static Display static multicast groups static count The numbers of all static multicast groups Command Mode Privileged EXEC Mode and Any Configuration Mode 191 Example Display the information of all IGMP
14. 177 removing MAC address entries which may decrease the performance and stability of the network With the Protect of Spanning Tree function enabled you can configure the number of TC BPDUs in a required time so as to avoid the process of removing MAC addresses frequently Syntax spanning tree guard tc no spanning tree guard tc Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the TC Protect of Spanning Tree for port 2 TL SG5428 config interface gigabitEthernet 1 0 2 TL SG5428 config if spanning tree guard tc spanning tree mcheck Description The spanning tree mcheck command is used to enable mcheck Syntax spanning tree mcheck Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable mcheck for port 2 TL SG5428 config interface gigabitEthernet 1 0 2 TL SG5428 config if spanning tree mcheck show spanning tree active Description The show spanning tree active command is used to display the active information of spanning tree 178 Syntax show spanning tree active Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the active information of spanning tree TL SG5428 config show spanning tree active show spanning tree bridge Description The show spanning tree bridge command is used to display the bridge parameters Syntax sh
15. Interface VIAN KEE 18 A educa sk cee tent E AES ET 19 switchport mode coocooccooccoocccnncnononnncnnncnnnco conocen onnn anes anes anes anes aaeeaaee gees aaee gees gees gees aes sees nae aaeeaaaeaeees 19 switchport access vam 20 switchport trunk allowed van 20 switchport general allowed van 21 SWIICNPOTT PVIG ae Eet lletra rios labs atte 22 SNOW Vlan SUMMA a a T initial ries 22 Show Vian Dref aie AAA AA a Ee 23 STOW VIAN Gi A ss dee Sens See eege dee See Nee 23 Chapter 4 Protocol VLAN Commande ceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeaeeeneees 24 protocol vlantemplate ccoucostas droit lacio tesi 24 protocol lan VAM TTT 24 lte ee EE BEE 25 show protocol vlan Template 26 show protocol vlan van 26 Show protocol vlan Interface 26 Chapter 5 VLANEV PA COMMAND Aitdas 28 DO AUN Mi A A AA 28 o TA 28 switchport dot1q tunnel enable cc cee eeeeeeeeeee eee inneke EEEE EEEE EEEE EEEE EEEE EEEE EEEE 29 switchport dot1q tunnel mode uplink ooocooccoccccciciniconccanocanonannannnnnnnnrn rr nn nn nn nn nr nr 29 show GOEDERT 30 show dot1q tunnel interface oooooococcccccococonoccconcnconcnnonnccnoncnnoncnnnnnncnnnnnnnncnnnnnncnnnnnnnecinnnnnennnnn 30 show dottg tunnel Uplink seselan ckt neger te beten Steed ici EN Chapter6 Voice VLAN CommandS cccceceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 32 LON a EE aR a 32 voice vlam aging Du 32 VOICE vlan Ee EE 33 SWItchport voice Vla MOUS TEE 34 switchp
16. Severity level There are 8 severity levels marked with values 0 7 The information of levels with priority not lower than the select level will display Display all the log information in the log buffer by default Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the log information from level O to level 5 in the log buffer TL SG5428 config show logging buffer level 5 show logging flash Description The show logging flash command is used to display the log information in the log file according to the severity level Syntax show logging flash level eve Parameter level Severity level There are 8 severity levels marked with values 0 7 The information of levels with priority not lower than the select level will display Display all the log information in the log file by default Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the log information with the level marked 0 3 in the log file TL SG5428 config show logging flash level 3 92 Chapter 17 SSH Commande SSH Security Shell can provide the unsecured remote management with security and powerful authentication to ensure the security of the management information ip ssh server Description The ip ssh server command is used to enable SSH function To disable the SSH function please use no ip ssh server command Syntax ip ssh server no ip ssh server Command Mode Global Configuration
17. The monitor session number ranging from 1 to 4 port The Ethernet port number Command Mode Global Configuration Mode Example Create monitor session 1 and configure port 1 as the monitoring port TL SG5428 config monitor session 1 destination interface gigabitEthernet 1 0 1 Delete the monitor session 1 TL SG5428 config no monitor session 1 142 monitor session source interface Description The monitor session source interface command is used to configure the monitored port To delete the corresponding monitored port please use no monitor session source interface command Syntax monitor session session_num source interface gigabitEthernet port list mode no monitor session session_num source interface gigabitEthernet port list mode Parameter session_num The monitor session number ranging from 1 to 4 port list List of monitored port It is multi optional mode The monitor mode There are three options rx tx and both Rx ingress monitoring mode means the incoming packets received by the monitored port will be copied to the monitoring port Tx egress monitoring mode indicates the outgoing packets sent by the monitored port will be copied to the monitoring port Both ingress and egress monitoring presents the incoming packets received and the outgoing packets sent by the monitored port will both be copied to the monitoring port Command Mode Global Configuration Mode User
18. cccocccccccnnonononononononononononononononnnnnnnnnn nn nn nn non n non nn non Eaa ADNAK N EENE EADE EENES 214 A A 214 Dusel ee EE 215 Show lldp intemace sims A A A A eee tone 215 show lldp local information Interface 216 show lldp neighbor information interface oooonicccnccccnnccccnconononccnnnononnnnnnnnonnnnnnnnnannnnncnncnnnnos 216 show lldp traffic interface ooonooocccnnoconinicconooccnnnnoconncnnonnnonnncnnoncnnnnnnn cnn no non cane nnnn ocn nnncncanannnnnss 217 Chapter 31 Cluster CONTAMOS A A bt 218 Cluster NAD Ria AAA A A IE 218 Cluster diia A AAA AAA dE e Eh 219 e Ee 220 CS A ta on 220 cl ster IPPO A eege 221 ClUSter command iras 221 Cluster MANS ii AAA A A eee 222 ele ET 222 Cluster Candidate eet lentas lei rellenas ais 223 Cluster INIA UA A ee AA A ida 223 Show ClUStOr A A A Ei 224 Show cl ster Ce A a ad ada 224 show cluster neighbour uk ENER ENKEN ENKEN ENKEN ERKENNEN ENER ENER ENER ENER ENER ENER ENER ENNEN EEN 225 SNOW CIUSUCR tc A ee 225 Show cluster ul E 226 show cluster Manage role ooocococccocococcooccnnncnnncnnncnnncnnncnnncnnncnnncnnnnnno nono nnnnnnnnnnnonnnonnnnnnnnnnnnnnnns 226 XII Preface This Guide is intended for network administrator to provide referenced information about CLI Command Line Interface The device mentioned in this Guide stands for TL SG5428 TL SG5412F JetStream L2 Managed Switch Overview of this Guide Chapter 1 Using the CLI Provide information about how
19. point to point The P2P link status with auto open and close options By default the option is auto If the two ports in the P2P link are root port or designated port they can transit their states to forwarding rapidly to reduce the unnecessary forward delay 167 Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the STP function of port 1 and configure the Port Priority as 64 ExtPath Cost as 100 IntPath Cost as 100 and then enable Edge Port TL SG5428 config interface gigabitEthernet 1 0 1 TL SG5428 config if spanning tree common config port priority 64 ext cost 100 int cost 100 portfast enable point to point open spanning tree mode Description The spanning tree mode command is used to configure the STP mode of the switch To return to the default configurations please use no spanning tree mode command Syntax spanning tree mode stp rstp mstp no spanning tree mode Parameter stp Spanning Tree Protocol the default value rstp Rapid Spanning Tree Protocol mstp Multiple Spanning Tree Protocol Command Mode Global Configuration Mode Example Configure the spanning tree mode as mstp TL SG5428 config spanning tree mode mstp spanning tree mst configuration Description The spanning tree mst configuration command is used to access MST Configuration Mode from Global Configuration Mode as to configure
20. 2 as group1 TL SG5428 config vlan 2 TL SG5428 config vlan name group1 switchport mode Description The switchport mode command is used to configure the Link Type for the ports Syntax switchport mode access trunk general Parameter access trunk general Link Types There are three Link Types for the ports 19 Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Specify the Link Type of port 3 as trunk TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if switchport mode trunk switchport access vlan Description The switchport access vlan command is used to add the desired Access port to IEEE 802 1Q VLAN To remove the specified port ports from the corresponding VLAN please use no switchport access vlan command Syntax switchport access vlan vlan id no switchport access vlan Parameter vlan id Specify IEEE 802 1Q VLAN ID ranging from 2 to 4094 Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Specify the Link Type of port 3 as access and add it to VLAN 2 TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if switchport mode access TL SG5428 config if switchport access vlan 2 switchport trunk allowed vlan Description The switchport trunk allowed vlan command is used to add the desired Trunk por
21. 34 show voice vlan Description The show voice vlan command is used to display the global configuration information of Voice VLAN Syntax show voice vlan Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration information of Voice VLAN globally TL SG5428 config show voice vlan show voice vlan oui Description The show voice vlan oui command is used to display the configuration information of Voice VLAN OUI Syntax show voice vlan oui Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration information of Voice VLAN OUI TL SG5428 config show voice vlan oui show voice vlan switchport Description The show voice vlan switchport command is used to display the Voice VLAN configuration information of all ports or a specified port Syntax 35 show voice vlan switchport gigabitEthernet port Parameter port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the Voice VLAN configuration information of all ports TL SG5428 config show voice vlan switchport Display the Voice VLAN configuration information of port 2 TL SG5428 config show voice vlan switchport gigabitEthernet 1 0 2 36 Chapter 7 Private VLAN Commands Private VLANs are configured specially for saving VLAN resource of uplink devices and decreasing broadcast private vlan primary D
22. 82 please use no ip dhcp snooping information remote id command Syntax ip dhcp snooping information remote id string no ip dhcp snooping information remote id Parameter string Enter the sub option Remote ID which contains 32 characters at most Command Mode Global Configuration Mode Example Enable and configure the customized sub option Remote ID for the Option 82 as tplink TL SG5428 config ip dhcp snooping information remote id tplink ip dhcp snooping information circuit id Description The ip dhcp snooping information circuit id command is used to enable and configure the customized sub option Circuit ID for the Option 82 To return to the 63 default Circuit ID for the Option 82 please use no ip dhcp snooping information circuit id command Syntax ip dhcp snooping information circuit id string no ip dhcp snooping information circuit id Parameter string Enter the sub option Circuit ID which contains 32 characters at most Command Mode Global Configuration Mode Example Enable and configure the customized sub option Circuit ID for the Option 82 as tplink TL SG5428 config ip dhcp snooping information circuit id tplink ip dhcp snooping trust Description The ip dhcp snooping trust command is used to configure a port to be a Trusted Port Only the Trusted Port can receive the DHCP packets from DHCP servers To turn the port back to a distrusted port please use no ip dhcp s
23. Chapter8 GVRP Commande GVRP GARP VLAN registration protocol is an implementation of GARP generic attribute registration protocol GVRP allows the switch to automatically add or remove the VLANs via the dynamic VLAN registration information and propagate the local VLAN registration information to other switches without having to individually configure each VLAN gvrp global Description The gvrp command is used to enable the GVRP function globally To disable the GVRP function please use no gvrp command Syntax gvrp no gvrp Command Mode Global Configuration Mode Example Enable the GVRP function globally TL SG5428 config gvrp gvrp interface Description The gvrp command is used to enable the GVRP function for the desired port To disable the GVRP function of this port please use no gvrp command The GVRP feature can only be enabled for the trunk type ports Syntax gvrp no gvrp Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet 42 Example Enable the GVRP function for ports 2 6 TL SG5428 config interface range gigabitEthernet 1 0 2 6 TL SG5428 config if range gvrp gvrp registration Description The gvrp registration command is used to configure the GVRP registration type on the desired port To restore to the default value please use no gvrp registration command Syntax gvrp registration normal fixed forbidden no gvrp r
24. DoS attack globally TL SG5428 config show ip dos prevent 77 Chapter 15 IEEE 802 1X Commands IEEE 802 1X function is to provide an access control for LAN ports via the authentication Only the supplicant passing the authentication can access the LAN dot1x system auth control Description The dot1x system auth control command is used to enable the IEEE 802 1X function globally To disable the IEEE 802 1X function please use no dot1x system auth control command Syntax dot1x system auth control no dot1x system auth control Command Mode Global Configuration Mode Example Enable the IEEE 802 1X function TL SG5428 config dot1x system auth control dot1x auth method Description The dot1x auth method command is used to configure the Authentication Method of IEEE 802 1X and the default 802 1x authentication method is eap md5 To restore to the default 802 1x authentication method please use no dot1x auth method command Syntax dot1x auth method pap eap md5 no dot1x auth method Parameter pap eap md5 Authentication Methods 78 pap IEEE 802 1X authentication system uses extensible authentication protocol EAP to exchange information between the switch and the client The transmission of EAP packets is terminated at the switch and the EAP packets are converted to the other protocol such as RADIUS packets for transmission eap md5 IEEE 802 1X authentication system uses extensib
25. EXEC Mode and Any Configuration Mode Example Display the running status of DHCP Snooping TL SG5428 show ip dhcp snooping show ip dhcp snooping information Description The show ip dhcp snooping information command is used to display the Option 82 configuration status of DHCP Snooping Syntax show ip dhcp snooping information Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the Option 82 configuration status of DHCP Snooping TL SG5428 show ip dhcp snooping information 67 show ip dhcp snooping interface gigabitEthernet Description The show ip dhcp snooping interface gigabitEthernet command is used to display the DHCP Snooping configuration of desired Gigabit Ethernet ports Syntax show ip dhcp snooping interface gigabitEthernet port Parameters port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the DHCP Snooping configuration of port 2 TL SG5428 show ip dhcp snooping interface gigabitEthernet 1 0 2 68 Chapter 12 ARP Inspection Commande ARP Address Resolution Protocol Detect function is to protect the switch from the ARP cheating such as the Network Gateway Spoofing and Man In The Middle Attack etc ip arp inspection global Description The ip arp inspection command is used to enable the ARP Detection function globally To disable the ARP Detection function please use no ip arp detection command
26. Mode Action Configuration Mode Example Edit the actions for policy1 Specify the mirror port for the data packets matching 161 ACL 120 as port 2 TL SG5428 config access list policy action policy1 120 TL SG5428 config action s mirror interface gigabitEthernet 1 0 2 access list bind interface Description The access list bind command is used to bind a policy to a specified port To cancel the bind relation please use no access list bind command Syntax access list bind policy name no access list bind policy name Parameter policy name The name of the policy desired to bind Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Bind policy1 to port 2 TL SG5428 config interface gigabitEthernet 1 0 2 TL SG5428 config if access list bind policy1 access list bind vlan Description The access list bind command is used to bind a policy to a VLAN To cancel the bind relation please use no access list bind command Syntax access list bind policy name no access list bind policy name Parameter policy name The name of the policy desired to bind Command Mode Interface VLAN Mode 162 Example Bind policy1 to VLAN 2 TL SG5428 config interface vlan 2 TL SG5428 config if access list bind policy1 show time range Description The show time range command is used to display the configuration of Time Range Syntax show
27. Mode Example Enable all SNMP extended MAC address related traps for the switch TL SG5428 config snmp server traps mac Enable new MAC address trap only for the switch TL SG5428 config snmp server traps mac new snmp server traps vlan Description The snmp server traps vlan command is used to enable SNMP extended VLAN related traps which include two types create and delete To disable this function please use no snmp server traps vlan command 202 Syntax snmp server traps vlan create delete no snmp server traps vlan create delete Parameter create Enable VLAN created trap It is sent when new VLAN is created successfully delete Enable VLAN deleted traps It is sent when VLAN is deleted successfully Command Mode Global Configuration Mode Example Enable all SNMP extended VLAN related traps for the switch TL SG5428 config snmp server traps vian Enable VLAN created trap only for the switch TL SG5428 config snmp server traps vlan create rmon history Description The rmon history command is used to configure the history sample entry To return to the default configuration please use no rmon history command RMON Remote Monitoring basing on SNMP architecture functions to monitor the network History Group is one of the commonly used RMON Groups After a history group is configured the switch collects network statistics information periodically based on which the management st
28. TL SG5428 config ip igmp snooping multi vlan config 3 rtime 100 TL SG5428 config ip igmp snooping multi vlan config 3 mtime 100 TL SG5428 config ip igmp snooping multi vlan config 3 me 3 TL SG5428 config ip igmp snooping multi vlan config 3 rport interface gigabitEthernet 1 0 3 ip igmp snooping filter add id Description The ip igmp snooping filter add id command is used to configure the multicast IP range desired to filter To delete the corresponding IP range please use no ip igmp snooping filter add id command When IGMP Snooping is enabled you can specified the multicast IP range the ports can join so as to restrict users ordering multicast programs via configuring multicast filter rules Multicast IP addresses ranges from 224 0 0 0 to 239 255 255 255 The range for receivers to join is from 224 0 1 0 to 239 255 255 255 Syntax ip igmp snooping filter addr id adar id list no ip igmp snooping filter addr id addr id list Parameter adar id list The filtering address ID to be bound Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet 186 Example Bind the filtering address ID 2 6 to port 3 TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if ip igmp snooping filter addr id 2 6 ip igmp snooping filter global Description The ip igmp snooping filter command is used to add or modify the multicast filtering IP range To delete the multicast filt
29. TPLINK TL SG5428 config hostname TPLINK location Description The location command is used to configure the system location To clear the system location information please use no location command Syntax location ocation no location Parameter location Device Location It consists of 32 characters at most It is SHENZHEN by default Command Mode Global Configuration Mode Example Configure the system location as SHENZHEN TL SG5428 config location SHENSHEN contact info Description The contact info command is used to configure the system contact information To clear the system contact information please use no contact info command Syntax contact info contact_info no contact info Parameter 112 contact_info Contact Information It consists of 32 characters at most It is www tp link com by default Command Mode Global Configuration Mode Example Configure the system contact information as www tp link com TL SG5428 config contact info www tp link com ip management vlan Description The ip management vlan command is used to configure the management VLAN through which you can log on to the switch By default the management VLAN is VLAN1 Syntax ip management vlan vlan id Parameter vlan id VLAN ID ranging from 1 to 4094 Command Mode Global Configuration Mode Example Set the VLAN6 as management VLAN TL SG5428 config ip management vlan 6
30. To cancel the user access limit please use no user access control command Syntax user access control ip based p addr ip mask no user access control Parameter ip addr The source IP address Only the users within the IP range you set here are allowed for login ip mask The subnet mask of the IP address Command Mode Global Configuration Mode Example Enable the access control of the user whose IP address is 192 168 0 148 TL SG5428 config user access control ip based 192 168 0 148 255 255 255 255 user access control mac based Description The user access control mac based command is used to limit the MAC Address of the users for login Only the user with this MAC Address you set here is allowed to login To cancel the user access limit please use no user access control command Syntax user access control mac based mac addr no user access control 52 Parameter mac addr The source MAC address Only the user with this MAC Address is allowed to login Command Mode Global Configuration Mode Example Configure that only the user whose MAC address is 00 00 13 0A 00 01 is allowed to login TL SG5428 config user access control mac based 00 00 13 0A 00 01 user access control port based Description The user access control port based command is used to limit the ports for login Only the users connected to these ports you set here are allowed to login To cancel the user access
31. To return to the default configuration please use no Ildp hold multiplier command Syntax lldp hold multiplier multiplier no Ildp hold multiplier 211 Parameter multiplier Configure the Hold Multiplier parameter It ranges from 2 to 10 By default it is 4 Command Mode Global Configuration Mode Example Specify Hold Multiplier as 5 TL SG5428 config Ildp hold multiplier 5 Ildp timer Description The Ildp timer command is used to configure the parameters about transmission To return to the default configuration please use no lldp timer command Syntax lldp timer tx interval tx interval tx delay tx delay reinit delay reinit delay notify interval notify interval fast count fast count no lidp timer tx interval tx delay reinit delay notify interval fast count Parameter tx interval Configure the interval for the local device to transmit LLDPDU to its neighbors The value ranges from 5 to 32768 and the default value is 30 seconds tx delay Configure a value from 1 to 8192 in seconds to specify the time for the local device to transmit LLDPDU to its neighbors after changes occur so as to prevent LLDPDU being sent frequently By default it is 2 seconds reinit delay This parameter indicates the amount of delay from when LLDP status becomes disable until re initialization will be attempted The value ranges from 1 to 10 and the default value is 3 seconds
32. You can choose one according to your needs Login local Mode It requires username and password which are both admin by default Login Mode It requires no username and password but a connection password is required Note 1 Before Telnet login you are required to configure Telnet login mode and login authentication information through Console connection The relevant CLI commands should be entered in the prompted DOS screen shown in Figure 1 5 Log in the Switch 2 You will enter to User EXEC Mode after Telnet connection is successfully created but for switch security concerns you are required to set a password which functions to further access to Privileged EXEC Mode when you configure the login mode gt Login Local Mode Firstly configure the Telnet login mode as login local and set the password for entering into the Privileged EXEC Mode as 123 in the prompted DOS screen shown in Figure 1 6 TPLINK HyperTerminal File Edit Yiew Call Transfer Help TL S65428 gt TL 65428 gt enable TL SG5428Hconfig TL SG5428 config Hline vty 0 5 TL S65428 config line login local Set login mode TL 65428 config line exit SET password for entering TL SG5428 config Henable password 123 privileged EXEC Mode Figure 1 6 Configure login local mode Now you can logon by Telnet in login local mode 1 Make sure the switch and the PC are in the same LAN Click Start Run to open the Run window and type cmd in the
33. access list num ACL ID ranging from 0 to 99 Command Mode Global Configuration Mode 155 Example Create a MAC ACL whose ID is 23 TL SG5428 config mac access list 23 access list standard Description The access list standard command is used to add Standard IP ACL rule To delete the corresponding rule please use no access list standard command Standard IP ACLs analyze and process data packets based on a series of match conditions which can be the source IP addresses and destination IP addresses carried in the packets Syntax access list standard acl id rule rule id deny permit sip source ip smask source ip mask dip destination ip dmask destination ip mask tseg time segment no access list standard acl id rule rule id Parameter acl id The desired Standard IP ACL for configuration rule id The rule ID deny The operation to discard packets permit The operation to forward packets It is the default value source ip The source IP address contained in the rule source ip mask The source IP address mask It is required if you typed the source IP address destination ip The destination IP address contained in the rule destination ip mask The destination IP address mask It is required if you typed the destination IP address time segment The time range for the rule to take effect By default it is not limited Command Mode Glob
34. command is used to configure the maximum number of BPDU packets transmitted per Hello Time interval To return to the default configurations please use no spanning tree hold count command Syntax spanning tree hold count value no spanning tree hold count Parameter value The maximum number of BPDU packets transmitted per Hello Time interval ranging from 1 to 20 in pps By default it is 5 Command Mode Global Configuration Mode Example Configure the hold count of STP as 8pps 174 TL SG5428 config spanning tree hold count 8 spanning tree max hops Description The spanning tree max hops command is used to configure the maximum number of hops that occur in a specific region before the BPDU is discarded To return to the default configurations please use no spanning tree max hops command Syntax spanning tree max hops value no spanning tree max hops Parameter value The maximum number of hops that occur in a specific region before the BPDU is discarded ranging from 1 to 40 in hop By default it is 20 Command Mode Global Configuration Mode Example Configure the max hops of STP as 30 TL SG5428 config spanning tree max hops 30 spanning tree bpdufilter Description The spanning tree bpdufilter command is used to enable the BPDU filter function for a port With the function enabled the port can be prevented from receiving and sending any BPDU packets To disable the BPDU filter function
35. control the forwarding sequence of the packets according to the priority queues and scheduling algorithms you set On this switch the priority levels are labeled as TCO TC1 TC3 Syntax qos queue mode sp wrr sp wrr equ no qos queue mode Parameter 138 sp Strict Priority Mode In this mode the queue with higher priority will occupy the whole bandwidth Packets in the queue with lower priority are sent only when the queue with higher priority is empty wrr Weight Round Robin Mode In this mode packets in all the queues are sent in order based on the weight value for each queue The weight value ratio of TCO TC1 TC2 and TC3 is 1 2 4 8 sp wrr Strict Priority Weight Round Robin Mode In this mode the switch provides two scheduling groups SP group and WRR group Queues in SP group and WRR group are scheduled strictly based on Strict Priority mode while the queues inside WRR group follow the WRR mode In SP WRR mode TC3 is the SP group TCO TC1 and TC2 belong to the WRR group and the weight value ratio of TCO TC1 and TC2 is 1 2 4 In this way when scheduling queues the switch allows TC3 to occupy the whole bandwidth following the SP mode and the TCO TC1 and TC2 in the WRR group will take up the bandwidth according to their ratio 1 2 4 equ Equal Mode In this mode all the queues occupy the bandwidth equally The weight value ratio of all the queues is 1 1 1 1 Command Mode Global
36. dhcp snooping information option no ip dhcp snooping information option Command Mode Global Configuration Mode Example Enable the Option 82 function of DHCP Snooping TL SG5428 config ip dhcp snooping information option ip dhcp snooping information strategy Description The ip dhcp snooping information strategy command is used to select the operation for the Option 82 field of the DHCP request packets from the Host To restore to the default option please use no ip dhcp snooping information strategy command Syntax ip dhcp snooping information strategy strategy no ip dhcp snooping information strategy Parameter strategy The operations for Option 82 field of the DHCP request packets from the Host including three types keep Indicates to keep the Option 82 field of the packets It is the default option replace Indicates to replace the Option 82 field of the packets with the switch defined one drop Indicates to discard the packets including the Option 82 field 62 Command Mode Global Configuration Mode Example Replace the Option 82 field of the packets with the switch defined one and then send out TL SG5428 config ip dhcp snooping information strategy replace ip dhcp snooping information remote id Description The ip dhcp snooping information remote id command is used to enable and configure the customized sub option Remote ID for the Option 82 To return to default Remote ID for the Option
37. enables you to implement ACL control over packets by differentiating the time ranges A time range can be specified in each rule in an ACL The rule takes effect only when the specified time range is configured and the system time is within the time range Syntax time range name no time range name Parameter name The Time Range name ranging from 1 to 16 characters Command Mode Global Configuration Mode Example Add a time range named tRange1 TL SG5428 config time range tRange1 absolute Description The absolute command is used to configure a Time Range into an absoluteness mode To delete the corresponding absoluteness mode Time range please use no absolute command Syntax absolute start sfart date end end date no absolute 152 Parameter start date The start date in Absoluteness Mode in the format of MM DD YYYY By default it is 01 01 2000 end date The end date in Absoluteness Mode in the format of MM DD YYYY By default it is 12 31 2000 The absoluteness mode will be disabled if the start date and end date are both in default value Command Mode Time range Create Configuration Mode Example Configure the time range tRange1 with time from May 5 2012 to Oct 5 2012 TL SG5428 config time range tRange1 TL SG5428 config time range absolute start 05 05 2012 end 10 05 2012 periodic Description The periodic command is used to configure the Time Range into an periodi
38. exceeds the set bandwidth in the storm control rate the packets will be automatically discarded to avoid network broadcast storm Syntax storm control unicast no storm control unicast Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example 128 Enable the unicast control function for port 5 TL SG5428 config interface gigabitEthernet 1 0 5 TL SG5428 config if storm control unicast storm control rate Description The storm control rate command is used to configure storm control rate To disable the storm control function please use no storm control rate command Storm Control function allows the switch to filter broadcast multicast and UL frame in the network If the transmission rate of the three kind packets exceeds the set bandwidth the packets will be automatically discarded to avoid network broadcast storm Syntax storm control rate rate no storm control rate Parameter rate The maximum ingress rate of the storm control packets The packet traffic exceeding the bandwidth will be discarded The value of it can be 128k 256k 512k 1m 2m 4m 5m 10m 20m 40m 50m in bps Command Mode Interface gigabitEthernet Interface range gigabitEthernet Example Specify the storm control rate as 2Mbps for port5 TL SG5428 config interface gigabitEthernet 1 0 5 TL SG5428 Config if storm control rate 2m bandwidth Description The bandwidth c
39. g HTTP based on TCP Adopting asymmetrical encryption technology SSL uses key pair to encrypt decrypt information A key pair refers to a public key contained in the certificate and its corresponding private key By default the switch has a certificate self signed certificate and a corresponding private key The certificate key download function enables the user to replace the default key pair ip http secure server Description The ip http secure server command is used to enable the SSL function globally on the switch To disable the SSL function please use no ip http secure server command Only the SSL function is enabled a secure HTTPS connection can be established Syntax ip http secure server no ip http secure server Command Mode Global Configuration Mode Example Enable the SSL function TL SG5428 config ip http secure server ip http secure server download certificate Description The ip http secure server download certificate command is used to download a certificate to the switch from TFTP server Syntax ip http secure server download certificate ss cert ip address p addr 97 Parameter ssl cert The name of the SSL certificate which is selected to download to the switch The length of the name ranges from 1 to 25 characters The certificate must be BASE64 encoded ip addr The IP address of the TFTP server Command Mode Global Configuration Mode Example Download a SSL certi
40. is used to display the security configuration of all ports or the specified port Syntax show mac address table max mac count interface gigabitEthernet port Parameter port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the security configuration of all ports TL SG5428 config show mac address table max mac count interface gigabitEthernet Display the security configuration of port 1 TL SG5428 config show mac address table max mac count interface gigabitEthernet 1 0 1 show mac address table interface gigabitEthernet Description The show mac address table interface gigabitEthernet command is used to display the address configuration of the specified port 104 Syntax show mac address table interface gigabitEthernet port Parameter port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the address configuration of port 1 TL SG5428 config show mac address table interface gigabitEthernet 1 0 1 show mac address table mac num Description The show mac address table mac num command is used to display the total amount of MAC address table Syntax show mac address table mac num Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the total amount of MAC address table TL SG5428 config show mac address table mac num show mac address table ma
41. it is 100 f event Fall Event which is the index of the corresponding event which will be triggered if the sampled value is lower than the Falling Threshold It ranges from 1 to 12 a type Alarm Type with rise fall and all options Rise indicates that the alarm event will be triggered when the sampled value exceeds the Rising Threshold fall indicates that the alarm event will be triggered when the sampled value is under the Falling Threshold and all indicates that the alarm event will be triggered either the sampled value exceeds the Rising Threshold or is under the Falling Threshold By default the Alarm Type is all owner name The owner of the entry ranging from 1 to 16 characters By default it is monitor interval The alarm interval time ranging from 10 to 3600 in seconds By default it is 1800 Command Mode Global Configuration Mode Example Configure the port of entries of 1 2 and 3 as port 2 the owners as owner1 and the alarm intervals as 100 seconds TL SG5428 config rmon alarm 1 3 interface gigabitEthernet 1 0 2 owner owner1 interval 100 show snmp server Description Syntax The show snmp server command is used to display SNMP configuration globally 206 show snmp server Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display SNMP configuration globally TL SG5428 show snmp server show snmp server view Description The
42. last sday Day to start with the options Sun Mon Tue Wed Thu Fri Sat smonth Month to start with options Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec stime Time to start in the format of hh mm eweek Week to end with options first second third fourth last eday Day to end with options Sun Mon Tue Wed Thu Fri Sat emonth Month to end with options Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec etime Time to end in the format of hh mm offset Specify the time adding in minutes when Daylight Saving Time comes The range of value depends and the default value is 60 minutes It is optional Command Mode Global Configuration Mode Example Specify the DST start time of the switch as 2 00 am on the first Sunday in May the end time as 2 00 am on the last Sunday in October and the offset as 45 minutes TL SG5428 config system time dst recurring first Sun May 02 00 last Sun Oct 02 00 45 hostname Description The hostname command is used to configure the system name To clear the system name information please use no hostname command Syntax hostname hostname no hostname Parameter 111 hostname System Name The length of the name ranges from 1 to 32 characters By default it is the device name for example TL SG5428 Command Mode Global Configuration Mode Example Configure the system name as
43. mac phy cfg max frame size power all Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Exclude management address and port vlan id TLVs in LLDPDU outgoing from port 1 TL SG5428 config interface gigabitEthernet 1 0 1 TL SG5428 config if no Ildp tlv select management address port vlan show Ildp Description The show Ildp command is used to display the global configuration of LLDP and LLDP MED fast start repeat count number Syntax show Ildp Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the global configuration of LLDP and LLDP MED fast start repeat count number TL SG5428 show lldp show Ildp interface Description The show Ildp interface command is used to display LLDP and LLDP MED configuration of the corresponding port By default the configuration of all the 215 ports will be displayed Syntax show Ildp interface gigabitEthernet port Parameter port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the LLDP and LLDP MED configuration of port 1 TL SG5428 show Ildp interface gigabitEthernet 1 0 1 show Ildp local information interface Description The show Ildp local information interface command is used to display the LLDP and LLDP MED local information of the corresponding port By default the informa
44. notify interval Specify the interval of Trap message which will be sent from local device to network management system The value ranges from 5 to 3600 and the default value is 5 seconds fast count When the port s LLDP state transforms from Disable or Rx_Only to Tx amp Rx or Tx_Only the fast start mechanism will be enabled that is the transmit interval will be shorten to a second and several LLDPDUs will 212 be sent out the number of LLDPDUs equals this parameter The value ranges from 1 to 10 and the default value is 3 Command Mode Global Configuration Mode Example Specify the Transmit Interval of LLDPDU as 45 seconds and Trap message to NMS as 120 seconds TL SG5428 config lldp timer tx interval 45 TL SG5428 config lldp timer notify interval 120 Ildp receive Description The Ildp receive command is used to enable the designated port to receive LLDPDU To disable the function please use no Ildp receive command Syntax lldp receive no Ildp receive Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable port 1 to receive LLDPDU TL SG5428 config interface gigabitEthernet 1 0 1 TL SG5428 config if Ildp receive Ildp transmit Description The Ildp transmit command is used to enable the designated port to transmit LLDPDU To disable the function please use no lldp transmit command Syntax lldp transmit
45. output By default it is 2 indicating that the log information marked with 0 2 will be saved in the log buffer Command Mode Global Configuration Mode Example Enable the log file function and set the severity as 7 TL SG5428 config logging file flash 7 clear logging Description The clear logging command is used to clear the information in the log buffer and log file Syntax clear logging buffer flash Parameter buffer flash The output channels buffer and flash Clear the information of the two channels by default 89 Command Mode Global Configuration Mode Example Clear the information in the log file TL SG5428 config clear logging buffer logging host index Description The logging host index command is used to configure the Log Host To clear the configuration of the specified Log Host please use no logging host index command Log Host is to receive the system log from other devices You can remotely monitor the settings and operation status of other devices through the log host Syntax logging host index idx host ip level no logging host index idx Parameter idx The index of the log host The switch supports 4 log hosts at most host ip The IP for the log host level The severity level of the log information sent to each log host There are 8 severity levels marked with values 0 7 The smaller value has the higher priority Only the log with the same or smaller sev
46. packet on the port exceeds the defined value so as to avoid ARP Attack flood Syntax ip arp inspection no ip arp inspection Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the arp defend function for ports 2 6 TL SG5428 config interface range gigabitEthernet 1 0 2 6 TL SG5428 config if range ip arp inspection 70 ip arp inspection limit rate Description The ip arp inspection limit rate command is used to configure the ARP speed of a specified port To restore to the default speed please use no ip arp inspection limit rate command Syntax ip arp inspection limit rate value no ip arp inspection limit rate Parameter value The value to specify the maximum amount of the received ARP packets per second ranging from 10 to 100 in pps packet second By default the value is 15 Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure the maximum amount of the received ARP packets per second as 50 pps for port 5 TL SG5428 config interface gigabitEthernet 1 0 5 TL SG5428 config if ip arp inspection limit rate 50 ip arp inspection recover Description The ip arp inspection recover command is used to restore to the port to the ARP transmit status from the ARP filter status Syntax ip arp inspection recover Command Mode Interface Configuration Mode int
47. please use no spanning tree bpdufilter command Syntax spanning tree bpdufilter no spanning tree bpdufilter Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet 175 Example Enable the BPDU filter function for port 2 TL SG5428 config interface gigabitEthernet 1 0 2 TL SG5428 config if spanning tree bpdufilter spanning tree bpduguard Description The spanning tree bpduguard command is used to enable the BPDU protect function for a port With the BPDU protect function enabled the port will set itself automatically as ERROR PORT when it receives BPDU packets and the port will disable the forwarding function for a while To disable the BPDU protect function please use no spanning tree bpduguard command Syntax spanning tree bpduguard no spanning tree bpduguard Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the BPDU protect function for port 2 TL SG5428 config interface gigabitEthernet 2 TL SG5428 config if spanning tree bpduguard spanning tree guard loop Description The spanning tree guard loop command is used to enable the Loop Protect function for a port Loop Protect is to prevent the loops in the network brought by recalculating STP because of link failures and network congestions To disable the Loop Protect function please use no spanning tree guard loop command S
48. snooping filter maxgroup Description The ip igmp snooping filter maxgroup command is used to specify the maximum number of multicast groups for a port to join in Syntax ip igmp snooping filter maxgroup maxgroup Parameter maxgroup The maximum number of multicast groups for a port to join in It is used to prevent some ports taking up too much bandwidth Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Specify the maximum number of multicast groups for ports 2 5 to join in as 10 TL SG5428 config interface range gigabitEthernet 1 0 2 5 TL SG5428 config if range ip igmp snooping filter maxgroup 10 ip igmp snooping filter mode Description The ip igmp snooping filter mode command is used to configure the Action mode for the desired port 188 Syntax ip igmp snooping filter mode mode Parameter mode Action Mode with refuse and accept options Refuse indicates only the multicast packets whose multicast IP is not in the IP range will be processed while accept indicates only the multicast packets whose multicast IP is in the IP range will be processed By default the option is accept Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Specify the Action Mode as accept for port 3 TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if ip igmp snooping filt
49. the VLAN Instance mapping region name and revision level To return to the 168 default configuration of the corresponding Instance please use no spanning tree mst configuration command Syntax spanning tree mst configuration no spanning tree mst configuration Command Mode Global Configuration Mode Example Enter into the MST configuration mode TL SG5428 config spanning tree mst configuration TL SG5428 Config mst instance Description The instance command is used to configure the VLAN Instance mapping To remove the VLAN instance mapping or disable the corresponding instance please use no instance command When an instance is disabled the related mapping VLANs will be removed Syntax instance instance id vlan vian id no instance instance id vlan vian id Parameters instance id Instance ID ranging from 1 to 8 vlan id The VLAN ID selected to mapping with the corresponding instance Command Mode MST Configuration Mode Example Map the VLANs 1 100 to Instance 1 TL SG5428 config spanning tree mst configuration TL SG5428 config mst instance 1 vlan 1 100 Disable Instance 1 namely remove all the mapping VLANs 1 100 TL SG5428 config spanning tree mst configuration 169 TL SG5428 config mst no instance 1 Remove VLANs 1 50 in mapping VLANs 1 100 for Instance 1 TL SG5428 config spanning tree mst configuration TL SG5428 config mst no instance 1 vlan 1 50 name Description Th
50. used to display the enginelD of the SNMP Syntax show snmp server enginelD Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the enginelD TL SG5428 show snmp server enginelD show rmon history Description The show rmon history command is used to display the configuration of the history sample entry Syntax show rmon history index Parameter index The index number of the entry selected to display the configuration ranging from 1 to 12 in the format of 1 3 5 You can select more than one entry for each command By default the configuration of all history sample entries is displayed Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration of all history sample entries TL SG5428 show rmon history show rmon event Description The show rmon event command is used to display the configuration of SNMP RMON Event Syntax 209 show rmon event index Parameter index The index number of the entry selected to display the configuration ranging from 1 to 12 in the format of 1 3 5 You can select more than one entry for each command By default the configuration of all SNMP RMON enabled entries is displayed Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the Event configuration of entry1 4 TL SG5428 show rmon event 1 4 show rmon alarm Description The show rmon alarm command
51. which contains 16 characters at most Command Mode Global Configuration Mode Example Create a Voice VLAN OUI described as TP Phone with the OUI address 00 11 11 11 11 11 and the mask address FF FF FF 00 00 00 TL SG5428 config voice vlan mac address 00 11 11 11 11 11 mask FF FF FF 00 00 00 description TP Phone 33 switchport voice vlan mode Description The switchport voice vlan mode command is used to configure the Voice VLAN mode for the Ethernet port Syntax switchport voice vlan mode manual auto Parameter manual auto Port mode Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure the port 3 to operate in the auto voice VLAN mode TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if switchport voice vlan mode auto switchport voice vian security Description The switchport voice vlan security command is used to enable the Voice VLAN security feature To disable the Voice VLAN security feature please use no switchport voice vlan security command Syntax switchport voice vlan security no switchport voice vian security Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable port 3 for the Voice VLAN security feature TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if switchport voice vlan security
52. which is the time between the switch receiving NTDP request packets and the switch forwarding NTDP request packets for the first time NTDP Hop Delay ranges from 1 to 1000 in milliseconds By default it is 200 port delay value NTDP Port Delay which is the time between the port forwarding NTDP request packets and its adjacent port forwarding NTDP 219 request packets over NTDP Port Delay ranges from 1 to 100 in milliseconds By default it is 20 hop value NTDP Hops which is the hop count the switch topology collects NTDP Hops ranges from 1 to 16 By default it is 3 Command Mode Global Configuration Mode Example Enable NTDP function globally and specify NTDP Hops as 5 NTDP Interval Time as 30 minutes TL SG5428 config cluster ntdp TL SG5428 config cluster ntdp timer interval timer 30 TL SG5428 config cluster ntdp hop 5 cluster explore Description The cluster explore command is used to manually collect the topology information Syntax cluster explore Command Mode Global Configuration Mode Example Enable the topology information collecting function manually TL SG5428 config cluster explore cluster Description The cluster command is used to configure cluster function for specified ports To return to the default configuration please use no cluster command Syntax cluster ndp disable enable ntdp disable enable no cluster 220 Parameter ndp Enable
53. 1024 globally TL SG5428 config lacp system priority 1024 lacp port priority Description The lacp port priority command is used to configure the LACP port priority for specified ports To return to the default configurations please use no lacp port priority command Syntax lacp port priority pri no lacp port priority Parameter pri The port priority ranging from O to 65535 It is 32768 by default Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure the LACP port priority as 1024 for ports 1 3 TL SG5428 config interface range gigabitEthernet 1 0 1 3 TL SG5428 config if range lacp port priority 1024 Configure the LACP port priority as 2048 for port 4 TL SG5428 config interface gigabitEthernet 1 0 4 TL SG5428 config if lacp port priority 2048 show etherchannel Description The show etherchannel command is used to display the EtherChannel information 48 Syntax show etherchannel channel group num detail summary Parameter channel group num The EtherChannel Group number ranging from 1 to 14 By default it is empty and will display the information of all EtherChannel Groups detail The detailed information of EtherChannel summary The EtherChannel information in summary Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the detailed information of EtherCha
54. 140 Description The show qos queue mode command is used to display the schedule rule of the egress queues Syntax show qos queue mode Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the schedule rule of the egress queues TL SG5428 show qos queue mode show qos status Description The show qos status command is used to display the status of IEEE 802 1P priority and DSCP priority Syntax show qos status Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the status of IEEE 802 1P priority and DSCP priority TL SG5428 show qos status 141 Chapter 23 Port Mirror Commande Port Mirror refers to the process of forwarding copies of packets from one port to a monitoring port Usually the monitoring port is connected to data diagnose device which is used to analyze the monitored packets for monitoring and troubleshooting the network monitor session destination interface Description The monitor session destination interface command is used to configure the monitoring port Each monitor session has only one monitoring port To change the monitoring port please use the monitor session destination interface command by changing the port value The no monitor session command is used to delete the corresponding monitor session Syntax monitor session session_num destination interface gigabitEthernet port no monitor session session_num Parameter session_num
55. 213 no Ildp transmit Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable port 1 to transmit LLDPDU TL SG5428 config interface gigabitEthernet 1 0 1 TL SG5428 config if lldp transmit Ildp snmp trap Description The Ildp snmp trap command is used to enable the ports SNMP notification If enabled the port will notify the trap event to network management system To disable the ports SNMP notification please use no Ildp snmp trap command Syntax lldp snmp trap no lldp snmp trap Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the SNMP notification for port 1 TL SG5428 config interface gigabitEthernet 1 0 1 TL SG5428 config if Ildp snmp trap Ildp tlv select Description The Ildp tlv select command is used to configure TLVs to be included in outgoing LLDPDU To exclude TLVs please use no lldp tlv select command By default All TLVs are included in outgoing LLDPDU Syntax 214 lldp tlv select port description system capability system description system name management address port vlan protocol vlan vlan name link aggregation mac phy cfg max frame size power all no lidp tlv select port description system capability system description system name management address port vlan protocol vlan vlan name link aggregation
56. 28 copy running config startup config copy startup config tftp Description The copy startup config tftp command is used to backup the configuration file to TFTP server Syntax copy startup config tftp ip address p addr filename name Parameter ip addr IP Address of the TFTP server name Specify the name for the configuration file which would be backup Command Mode Privileged EXEC Mode Example Backup the configuration files to TFTP server with the IP 192 168 0 148 and name this file config cfg 116 TL SG5428 copy startup config tftp ip address 192 168 0 148 filename config cfg copy tftp startup config Description The copy tftp startup config command is used to download the configuration file to the switch from TFTP server Syntax copy tftp startup config ip address p addr filename name Parameter ip addr IP Address of the TFTP server name Specify the name for the configuration file which would be downloaded Command Mode Privileged EXEC Mode Example Download the configuration file named as config cfg to the switch from TFTP server with the IP 192 168 0 148 TL SG5428 copy tftp startup config ip address 192 168 0 148 filename config cfg firmware upgrade Description The firmware upgrade command is used to upgrade the switch system file via the TFTP server Syntax firmware upgrade ip address jp addr filename name Parameter ip addr IP Address of the TF
57. 28 config enable password admin 15 disable Description The disable command is used to return to User EXEC Mode from Privileged EXEC Mode Syntax disable Command Mode Privileged EXEC Mode Example Return to User EXEC Mode from Privileged EXEC Mode TL SG5428 disable TL SG5428 gt configure Description The configure command is used to access Global Configuration Mode from Privileged EXEC Mode Syntax configure Command Mode Privileged EXEC Mode Example Access Global Configuration Mode from Privileged EXEC Mode TL SG5428 configure TL SG5428 config exit Description The exit command is used to return to the previous Mode from the current Mode Syntax exit 16 Command Mode Privileged EXEC Mode and Any Configuration Mode Example Return to Global Configuration Mode from Interface Configuration Mode and then return to Privileged EXEC Mode TL SG5428 config if exit TL SG5428 config exit TL SG5428 end Description The end command is used to return to Privileged EXEC Mode Syntax end Command Mode Any Configuration Mode Example Return to Privileged EXEC Mode from Interface Configuration Mode TL SG5428 config if end TL SG5428 17 Chapter 3 IEEE 802 1Q VLAN Commands VLAN Virtual Local Area Network technology is developed for the switch to divide the LAN into multiple logical LANs flexibly Hosts in the same VLAN can communicate with each other
58. 28 config vlan 3 TL SG5428 config vlan Hprivate vlan association 4 switchport private vlan Description The switchport private vlan command is used to configure the private VLAN mode for the switchport To invalid the configuration please use no switchport private vlan command 38 Syntax switchport private vlan promiscuous host no switchport private vlan promiscuous host Parameter promiscuous host Configure the private VLAN mode for the switchport Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure Gigabit Ethernet port 3 as host TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if switchport private vlan host switchport private vlan host association Description The switchport private vlan host association command is used to add host type port to private VLAN To remove the port from Private VLAN please use no switchport private vlan host association command Syntax switchport private vlan host association primary_vian_id secondary_vlan_id no switchport private vlan host association primary_vlan_id secondary_vlan_id Parameter primary vlan id Primary VLAN ID ranging from 2 to 4094 secondary vlan id Secondary VLAN ID ranging from 2 to 4094 Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Conf
59. 28 config Hline vty 0 5 TL S65428 config line login set login mode TL 65428 config line password 123 set connection password TL 65428 config line exit TL SG5428 config tenable password 123 lt entering Privileged set password for EXEC Mode TL 65428 config Figure 1 11 Configure login mode Now you can logon by Telnet in login mode 1 Open Telnet then type telnet 192 168 0 1 in the command prompt shown as Figure 1 12 and press the Enter button icrosoft Windows XP Version 5 1 26040 1 lt C gt Copyright 1985 2901 Microsoft Corp C Documents and Settings Admin gt telnet 192 168 B 1 Figure 1 12 Connecting to the Switch You are prompted to enter the connection password 123 you have set through Console port connection and then you are in User EXEC Mode Dat Password TL SG5428 gt Figure 1 13 Enter into the User EXEC Mode When entering enable command to access Privileged EXEC Mode you are required to give the password 123 you have set through Console port connection EIS Password TL SG5428 gt enable Password Figure 1 14 Enter into the Privileged EXEC Mode 10 Now you can manage your switch with CLI commands through Telnet connection Note You can refer to Chapter 10 User Manage Commands for detailed commands information of the Telnet connection configuration 1 2 CLI Command Modes The CLI is divided into different command modes User EXEC Mode P
60. 428 config if range channel group 1 mode on 46 port channel Ioad balance Description The port channel load balance command is used to configure the Aggregate Arithmetic for LAG To return to the default configurations please use no port channel load balance command Syntax port channel load balance src dst mac src dst ip no port channel load balance Parameter src dst mac The source and destination MAC address When this option is selected the Aggregate Arithmetic will be based on the source and destination MAC addresses of the packets The Aggregate Arithmetic for LAG is src dst mac by default src dst ip The source and destination IP address When this option is selected the Aggregate Arithmetic will be based on the source and destination IP addresses of the packets Command Mode Global Configuration Mode Example Configure the Aggregate Arithmetic for LAG as src dst mac TL SG5428 config port channel load balance src dst mac lacp system priority Description The lacp system priority command is used to configure the LACP system priority globally To return to the default configurations please use no lacp system priority command Syntax lacp system priority pri no lacp system priority Parameter pri The system priority ranging from 0 to 65535 It is 32768 by default 47 Command Mode Global Configuration Mode Example Configure the LACP system priority as
61. 5 and SHA options None indicates no authentication method is used MD5 indicates the port authentication is performed via HMAC MD5 algorithm and SHA indicates the port authentication is performed via SHA Secure Hash Algorithm SHA authentication mode has a higher security than MD5 mode By default the Authentication Mode is none confirm pwd Authentication Password ranging from 1 to 16 characters emode The Privacy Mode of the SNMP v3 User with none and DES options None indicates no privacy method is used and DES indicates DES encryption method is used By default the Privacy Mode is none encrypt pwd Privacy Password ranging from 1 to 16 characters Command Mode Global Configuration Mode Example Add Local User admin to Group group2 and configure the Security Model of the user as v3 the Security Level of the group as authPriv the Authentication Mode of the user as MD5 the Authentication Password as 11111 the Privacy Mode as DES and the Privacy Password as 22222 TL SG5428 config snmp server user admin local group2 smode v3 slev authPriv cmode MD5 cpwd 11111 emode DES epwd 22222 196 snmp server community Description The snmp server community command is used to add Community To delete the corresponding Community please use no snmp server community command SNMP v1 and SNMP v2c adopt community name authentication The community name can limit access to the SNMP agent from SNMP network man
62. Configuration Mode Example Specify the Schedule Mode as Weight Round Robin Mode TL SG5428 config qos queue mode wrr show qos interface Description The show qos interface command is used to display the configuration of QoS based on port priority Syntax show qos interface gigabitEthernet port range gigabitEthernet port list Parameter port The Ethernet port number port list The list of Ethernet ports Command Mode Privileged EXEC Mode and Any Configuration Mode Example 139 Display the configuration of QoS for port 5 TL SG5428 show oos interface gigabitEthernet 1 0 5 Display the configuration of QoS for ports 1 4 TL SG5428 show qos interface range gigabitEthernet 1 0 1 4 show qos cos map Description The show qos cos map command is used to display the configuration of IEEE 802 1P Priority and the mapping relation between cos id and tc id Syntax show qos cos map Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration of IEEE 802 1P Priority and the mapping relation between cos id and tc id TL SG5428 show qos cos map show qos dscp map Description The show qos dscp map command is used to display the configuration of DSCP Priority Syntax show qos dscp map Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration of DSCP Priority TL SG5428 show gos dscp map show qos queue mode
63. Disable NDP function for the port By default it is enabled ntdp Enable Disable NTDP function for the port By default it is enabled Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable NDP and NTDP function for port 5 TL SG5428 config interface gigabitEthernet 1 0 5 TL SG5428 config if cluster ndp enable ntdp enable cluster ip pool Description The cluster ip pool command is used to create a new cluster If no specified cluster name is set through cluster commander command the newly created cluster will enjoy the system default name tplink cluster Syntax cluster ip pool p mask Parameter ip The cluster IP address pool mask The cluster IP address mask Command Mode Global Configuration Mode Example Create a cluster and configure its IP address pool as 192 168 10 1 192 168 0 254 TL SG5428 config cluster ip pool 192 168 10 1 255 255 255 0 cluster commander Description The cluster commander command is used to specify the cluster name and you can only specify the cluster name when you create the cluster To delete a cluster please use no cluster commander command 221 Syntax cluster commander name no cluster commander Parameter name The cluster name ranging from 1 to 16 characters Command Mode Global Configuration Mode Example Configure the newly created cluster name as tp TL SG5428 c
64. Display the number of the illegal ARP packets received TL SG5428 config show ip arp inspection statistics clear ip arp inspection statistics Description The clear ip arp inspection statistics command is used to clear the statistic of the illegal ARP packets received Syntax clear ip arp inspection statistics Command Mode Privileged EXEC Mode and Any Configuration Mode Example Clear the statistic of the illegal ARP packets received TL SG5428 config clear ip arp inspection statistics 73 Chapter 13 IP Verify Source Commande IP Verify Source is to filter the IP packets based on the IP MAC Binding entries Only the packets matched to the IP MAC Binding rules can be processed which can enhance the bandwidth utility ip verify source Description The ip verify source command is used to configure the IP Verify Source mode for a specified port To disable the IP Verify Source function please use no ip verify source command Syntax ip verify source sip sip mac no ip verify source Parameter sip sip mac Security type sip indicates that only the packets with its source IP address and port number matched to the IP MAC binding rules can be processed sip mac indicates that only the packets with its source IP address source MAC address and port number matched to the IP MAC binding rules can be processed Command Mode Interface Configuration Mode interface gigabitEthemet interface range
65. Guidelines 1 The monitoring port is corresponding to current interface configuration mode 2 Monitored ports number is not limited but it can t be the monitoring port at the same time 3 Whether the monitoring port and monitored ports are in the same VLAN or not is not demanded strictly 4 The monitoring port and monitored ports cannot be link aggregation member Example Create monitor session 1 then configure port 4 5 7 as monitored port and enable ingress monitoring 143 TL SG5428 config monitor session 1 source interface gigabitEthernet 1 0 4 5 1 0 7 rx Delete port 4 in monitor session 1 and its configuration TL SG5428 config no monitor session 1 source interface gigabitEthernet 1 0 4 rx show monitor session Description The show monitor session command is used to display the configuration of port monitoring Syntax show monitor session session_num Parameter session_num The monitor session number ranging from 1 to 4 It is optional By default the monitoring configuration of all monitor sessions is displayed Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the monitoring configuration of monitor session 1 TL SG5428 config show monitor session 1 Display the monitoring configuration of all monitor sessions TL SG5428 config show monitor session 144 Chapter 24 Port Isolation Commande Port Isolation provides a method of restricting t
66. HOW iP SOUrCE ien e EE 66 SHOW IP GHEP SNOOPING ET 67 show ip dhcp snooping Information 67 show ip dhcp snooping interface gigabitEthernet cece ceccecceceeeeeeeeeeneeeeceeeeeeesesenneaeeess 68 Chapter 12 ARP Inspection Commande rn nrereenn 69 ip arp gie Eiere e Tute ee RE 69 IPALPINSPSCUOM E eli title 69 ip arp inspection interface oooooccococonncocoooconcccccconnnnonnnnnononnnnannnnnnnnnnnnnonannnnnnnnnnnnnenannnnnnnnnnnanens 70 ip arp inspection Imtt rote eee eee eee ease aaeeaaeeaaee sees sees sees sees aaeeaaeeaaeeeeeenieeaees 71 del Bee ee 71 SNHOW IP ATPINSpPeClON EE 72 show ip arp inspection interface oooononconococccnoccccnonancnnnnnnnccnnnnnnnnnnnnnnnononnnnnnnnnnnnnnnnnnnnnanncnnnnns 72 show ip arp inspection StatistiCS AER 73 clear ip arp inspection statistics cece ceeeeeeeeeeeeee eee eeeeeeaeeeae seas eaaeeaaeeaaeaaaeeaaeaaeeeaaeeaeeaaaeaaes 73 Chapter 13 IP Verify Source Commande rn nrreeenn 74 ID Verify SOUL Orii deeg A a led ee een E na Gey 74 Ge diene te EE 74 Chapter 14 DoS Defend Commande 76 IP dos Drevent gees aeaaaeaaaeaeaeeaaeasaeensees 76 iP dos pr vent TE 76 Show Ip ee 77 Chapter 15 IEEE 602 1X CommMandS 0 2 2 2 012 c ssateedsrrasseavsuidenia deeg seas a Asi 78 dot1x system auth Control 000 nn nnn nnn nnn nn nnn nnn nn ni ni ii etn eetneenneeeeeereres 78 dotlx auth MethOd E 78 dot1x guest vlan global c cccceeceeeceeeeceeeeeeeeeeeeeeeeeaeeeeeeeeeeeceqceeeeeeee
67. Mode Example Enable the SSH function TL SG5428 config ip ssh server ip ssh version Description The ip ssh version command is used to enable the SSH protocol version To disable the protocol version please use no ip ssh version command Syntax ip ssh version v1 v2 no ip ssh version v1 v2 Parameter v1 v2 The SSH protocol version to be enabled They represent SSH vi and SSH v2 respectively Command Mode Global Configuration Mode 93 Example Enable SSH v2 TL SG5428 config ip ssh version v2 ip ssh timeout Description The ip ssh timeout command is used to specify the idle timeout time of SSH To restore to the factory defaults please use ip ssh timeout command Syntax ip ssh timeout value no ip ssh timeout Parameter value The ldle timeout time During this period the system will automatically release the connection if there is no operation from the client It ranges from 1 to 999 in seconds By default this value is 500 Command Mode Global Configuration Mode Example Specify the idle timeout time of SSH as 300 seconds TL SG5428 config ip ssh timeout 300 ip ssh max client Description The ip ssh max client command is used to specify the maximum number of the connections to the SSH server To return to the default configuration please use no ip ssh max client command Syntax ip ssh max client num no ip ssh max client Parameter num The maximum number
68. NG VAM TT 190 show ip mp SNOOPING multt vlan aaeeaaeeaaeeaaeeaaeeaaeeaeeeaaeeaeeeaeeeaes 191 show IP mp snooping QFOUPS 0 ceeeeeceeeeeeeeeeeeeeaeeeaeeeaeeaaee sees cues EEEE EEEE EEEE 191 show ip igmp snooping filter ooooonnonocicinnnnonononconcncnnonoccnnnnanonnnnonnnnnnnnnnnnncnnnnnninnnnnnnnnnno 192 Chapter 29 SNMP Commands ees 193 Gil E 193 SNIMP SOIVO VIW iiris A 193 SNMP SErver WOUD tii id eee ees de eee O ERRA 194 SNMP SEPrVer HESE eebe ee ee heehee a eee it tee aes 195 SNMP SErver COMMUNI ty 0 cece eeeeeeee eee eee eeee eee eee eae eee eee eee eae eae eee eee EEEE EEEa 197 SAMP eVet MOS tardas 197 shimp server engine le tas 199 snimp server Traps SNMP EE 199 snmp server traps Imk status AAA 200 SNIMP SErver trapS sca eee ahd Ao ee A tee eta 201 SNMP SErver traps mar 202 SMIMpP Server taps VIAN ini A A at 202 MON NISTO i a oc Ee Genee deet BEE adie 203 FIMON EE 204 A feet e E ENSS E S Dec tne Selec tected cute EN ENSS SS 205 SNOW SNMP SEfFVEF ee eee 206 SNOW snmp server VIEW ENEE EEN eee eee eee eee eee eee eee EEN 207 SNOW SMMP SEPrVer Oroup NENNEN rr 207 Nell Ee 207 SHOW SNMp Server COMMUNIEY A 208 Show snmp server host AAA 208 show snmp server engine 208 SHOW MOM MISLOMY EE 209 SHOW TMOMN OVEN EE 209 SNOW imon alai M ME 210 Chapter g0 LLO CommandS ee 211 di EEE NE EEE ee E A EEEE 211 Helps Fole r ult ple ties hi ata 211 AP UNE A A 212 lp ee 213 ldp gn LEE 213 WP SOMp H Tap
69. P Syntax show cluster ntdp interface gigabitEthernet port device list 224 Parameter port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the NTDP configuration globally TL SG5428 show cluster ntdp Display the NTDP configuration of all Ethernet ports TL SG5428 show cluster ntdp interface Display the NTDP configuration of port 2 TL SG5428 show cluster ntdp interface gigabitEthernet 1 0 2 Display the information of device collected through NTDP TL SG5428 show cluster ntdp device list show cluster neighbour Description The show cluster neighbour command is used to display the cluster neighbor information Syntax show cluster neighbour Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the cluster neighbor information TL SG5428 show cluster neighbour show cluster Description When the current switch is Commander Switch the show cluster command is used to display the global configuration of Cluster Syntax show cluster 225 Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the global configuration of Cluster TL SG5428 show cluster show cluster member Description The show cluster member command is used to display the member information Syntax show cluster member Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the member
70. Port Time ranges from 60 to 600 in seconds By default it is 300 member time Member Port Time Within this time if the switch does not receive IGMP report message from the member port it will consider this port is not a member port any more Member Port Time ranges from 60 to 600 in seconds By default it is 260 leave time Leave Time which is the interval between the switch receiving a leave message from a host and the switch removing the host from the multicast groups Leave Time ranges from 1 to 30 in seconds By default it is 1 port The Ethernet port number vlan id The VLAN ID of the multicast IP ranging from 1 to 4094 ip The static multicast IP address port list The list of Ethernet ports Command Mode Global Configuration Mode 184 Example Enable the IGMP Snooping function and modify Router Port Time as 300 seconds Member Port Time as 200 seconds for VLAN 1 3 and set the Leave time as 15 seconds for VLAN 1 2 TL SG5428 config ip igmp snooping vlan config 1 3 rtime 300 TL SG5428 config ip igmp snooping vlan config 1 3 mtime 200 TL SG5428 config ip igmp snooping vlan config 1 2 me 15 Add static multicast IP address 225 0 0 1 which corresponds to VLAN 2 and configure the forward port as port 1 3 TL SG5428 config ip igmp snooping vlan config 2 static 225 0 0 1 interface gigabitEthernet 1 0 1 3 ip igmp snooping multi vlan config Description The ip igmp snoopi
71. Privileged E Mode EXEC mode port list command to access interface S Configuration mode Use the vlan vlan list to access VLAN Configuration mode Mode Accessing Path Prompt Logout or Access the next mode Use the interface gigabitEthernet port Use the end command or press Ctrl Z Interface or interface range TL SG5428 config if to return to Privileged EXEC mode Configuration gigabitEthernet or Enter the exit or the command to ya gurao port list command to TL SG5428 config if return to Global Configuration mode i enter this mode from range A port number must be specified in the Global Configuration interface command mode VLAN Use the vlan vlan list Use the end command or press Ctrl Z Configuration command to enter this TL SG5428 config to return to Privileged EXEC mode Mod 9 mode from Global vian Enter the exit or the command to ode Configuration mode return to Global configuration mode Note 1 The user is automatically in User EXEC Mode after the connection between the PC and the switch is established by a console port or by a telnet connection 2 Each command mode has its own set of specific commands To configure some commands you should access the corresponding command mode firstly e Global Configuration Mode In this mode global commands are provided such as the Spanning Tree Schedule Mode and so on e Interface Configuration Mode In this mode users ca
72. Syntax ip arp inspection no ip arp inspection Command Mode Global Configuration Mode Example Enable the ARP Detection function globally TL SG5428 config ip arp inspection ip arp inspection trust Description The ip arp inspection trust command is used to configure the port for which the ARP Detect function is unnecessary as the Trusted Port To clear the Trusted Port list please use no ip arp detection trust command The specific ports such as up linked port routing port and LAG port should be set as Trusted Port To ensure the normal communication of the switch please configure the ARP Trusted Port before enabling the ARP Detect function Syntax ip arp inspection trust no ip arp inspection trust 69 Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure the ports 2 5 as the Trusted Port TL SG5428 config interface range gigabitEthernet 1 0 2 5 TL SG5428 config if range ip arp inspection trust ip arp inspection interface Description The ip arp inspection command is used to enable the ARP Defend function To disable the ARP detection function please use no ip arp inspection command ARP Attack flood produces lots of ARP Packets which will occupy the bandwidth and slow the network speed extremely With the ARP Defend enabled the switch can terminate receiving the ARP packets for 300 seconds when the transmission speed of the legal ARP
73. TP LINK CLI Reference Guide TL SG5428 24 Port Gigabit L2 Managed Switch with 4 SFP Slots TL SG5412F 12 Port Gigabit SFP L2 Managed Switch with 4 Combo 1000BASE T Ports REV2 1 1 1910010847 COPYRIGHT amp TRADEMARKS Specifications are subject to change without notice TP LINK is a registered trademark of TP LINK TECHNOLOGIES CO LTD Other brands and product names are trademarks or registered trademarks of their respective holders No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation transformation or adaptation without permission from TP LINK TECHNOLOGIES CO LTD Copyright 2013 TP LINK TECHNOLOGIES CO LTD All rights reserved http www tp link com CONTENTS Preface A Eder 1 Chapter 1 Using the Cll iii da 4 1 1 Accessing hue D EE 4 1 1 1 Logon by a ConSole en ai Gaeeeraneeeaen cee 4 1 1 2 Logon et EE 6 12 CLl Command Modes curiosa 11 1 3 Security EE 13 14 Conventions E 13 1 4 1 Format Conventions eiee iein ei aeieea eerren adara E reena Ea TEKEENA EEK EEEIEI CE EA 13 14 2 Special Characters ANNE 13 1 4 3 Parameter Formatii a AA enn rn ee 14 Chapter 2 VEER 15 enable EE 15 Snable Dees r reed ee Beie dee ee e EREE a ee 15 US lui AA AAA A A A A AAA 16 Elle ri AAA A A AS 16 AMM E ee de Eege 16 NE te auteast ans 17 Chapter3 IEEE 802 1Q VLAN Commande ococcccccccconnnnncnnnnncncncnnnnanonnnnnnnnnnonnnnonos 18 AE 18
74. TP server name Specify the name for the firmware file Command Mode Privileged EXEC Mode 117 Example Upgrade the switch system file named as firmware bin via the TFTP server with the IP address 192 168 0 148 TL SG5428 firmware upgrade ip address 192 168 0 148 filename firmware bin 118 ping Description The ping command is used to test the connectivity between the switch and one node of the network Syntax ping p_addr y n count l count i count Parameter ip_addr The IP address of the destination node for ping test n count The amount of times to send test data during Ping testing It ranges from 1 to 10 By default this value is 4 count The size of the sending data during ping testing It ranges from 1 to 1024 bytes By default this value is 64 i count The interval to send ICMP request packets It ranges from 100 to 1000 milliseconds By default this value is 1000 Command Mode User EXEC Mode and Privileged EXEC Mode Example To test the connectivity between the switch and the network device with the IP 192 168 0 131 please specify the count l as 512 bytes and count i as 1000 milliseconds If there is not any response after 8 times Ping test the connection between the switch and the network device is failed to establish TL SG5428 ping 192 168 0 131 n 8 1 512 tracert Description The tracert command is used to test the connect
75. There are three options including noAuthNoPriv no authorization and no encryption authNoPriv authorization and no encryption and authPriv authorization and encryption By default the option is noAuthNoPriv type The type of the notifications with trap and inform options Trap indicates traps are sent while inform indicates informs are sent The inform type has a higher security than the trap type and resend and timeout need to be configured if you select this option You can only select the trap type in Security Model v1 By default the type of the notifications is trap retries The amount of times the switch retries an inform request ranging from 1 to 255 The switch will resend the inform request if it doesn t get the response from the management station during the Timeout interval and it will terminate resending the inform request if the resending times reach the specified Retry times timeout The maximum time for the switch to wait for the response from the management station before resending a request ranging from 1 to 3600 in seconds Command Mode Global Configuration Mode Example Add a Notification entry and configure the IP Address of the management Host as 192 168 0 146 the UDP port as 162 the User name of the management station as admin the Security Model of the management station as v2c the type of the notifications as inform the maximum time for the switch to wait as 1000
76. To log on to the switch by the console port on the switch please take the following steps 1 Connect the PCs or Terminals to the console port on the switch by a provided cable 2 Click Start All Programs Accessories Communications Hyper Terminal to open the Hyper Terminal as the Figure 1 1 shown Set Program Access and Defaults W Windows Catalog Windows Update B Program Updates E Accessibility ICH Games EN Startup gt 3 Entertainment Internet Explorer H System Tools ei msn 9 Address Book ES Outlook Express E Calculator Network Connections 2 Network Setup Wizard Internet Internet Explorer i E mail Microsoft Office Out fa Notepad ES Command Prompt OvisLink Wireless Che Utility E New Connection Wizard F Remote Desktop Connection Remote Assistance E Command Prompt Wireless Network Setup Wizard Notepad Y Paint S i Program Compatibility Wizard Y Synchronize t windows Media Player Ki Windows Messenger Y Windows Movie Maker WF Activate Windows E ixchariot FH Tour Windows xP a MSN E asmax FH CQ Windows Explorer E Logmett H A WordPad O Windows Media Play a Vera earn gt Y Wi Im Microsoft Office Im Macrovision Le E TP LINK All Programs ei OvisLink gt Bros or 0 run ort Figure 1 1 Open Hyper Terminal 3 The Connection Description Window will prompt a
77. ack detection global status loopback detection interval and loopback detection recovery time Syntax show loopback detection global Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the global configuration of loopback detection function TL SG5428 show loopback detection global show loopback detection interface Description The show loopback detection interface command is used to display the configuration of loopback detection function and the status of the specified Ethernet port Syntax show loopback detection interface gigabitEthernet port Parameter port The Ethernet port number 150 Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration of loopback detection function and the status of all ports TL SG5428 show loopback detection interface Display the configuration of loopback detection function and the status of port 5 TL SG5428 show loopback detection interface gigabitEthernet 1 0 5 151 Chapter 26 ACL Commande ACL Access Control List is used to filter data packets by configuring a series of match conditions operations and time ranges It provides a flexible and secured access control policy and facilitates you to control the network security time range Description The time range command is used to add Time Range To delete the corresponding Time Range please use no time range command A time range based ACL
78. address The value of it can be 0 or ranges from 10 to 630 seconds When 0 is entered the Auto Aging function is disabled It is 300 by default Command Mode Global Configuration Mode Example Configure the aging time as 500 seconds TL SG5428 config mac address table aging time 500 mac address table filtering Description The mac address table filtering command is used to add the filtering address entry To delete the corresponding entry please use no mac address table filtering command The filtering address function is to forbid the undesired package to be forwarded The filtering address can be added or removed manually independent of the aging time Syntax mac address table filtering mac mac addr vid vid no mac address table filtering mac mac addr vid vid Parameter mac addr The MAC address to be filtered vid The corresponding VLAN ID of the MAC address It ranges from 1 to 4094 101 Command Mode Global Configuration Mode Example Add a filtering address entry of which VLAN ID is 1 and MAC address is 00 1e 4b 04 01 5d TL SG5428 config mac address table filtering mac 00 1e 4b 04 01 5d vid 1 mac address table max mac count Description The mac address table max mac count command is used to configure the Port Security To return to the default configurations please use no mac address table max mac count command Port Security is to protect the switch from the malicious MAC address a
79. agement station functioning as a password Syntax snmp server community name read only read write mib view no snmp server community name Parameter name Community Name ranging from 1 to 16 characters read only read write The access rights of the community with read only and read write options mib view The MIB View for the community to access Command Mode Global Configuration Mode Example Add community public and the community has read write management right to View viewDefault TL SG5428 config snmp server community public read write viewDefault snmp server host Description The snmp server host command is used to add Notification To delete the corresponding Notification please use no snmp server host command Syntax snmp server host ip udp port user name smode v1 v2c v3 slev noAuthNoPriv authNoPriv authPriv type trap inform retries retries timeout timeout no snmp server host ip user name Parameter ip The IP Address of the management Host 197 udp port UDP port which is used to send notifications The UDP port functions with the IP address for the notification sending It ranges from 1 to 65535 user name The User name of the management station smode The Security Model of the management station with v1 v2c and v3 options By default the option is v1 slev The Security Level of SNMP v3 Group
80. al Description The ip igmp snooping command is used to configure IGMP Snooping globally To disable the IGMP Snooping function please use no ip igmp snooping command Syntax ip igmp snooping no ip igmp snooping Command Mode Global Configuration Mode Example Enable IGMP Snooping function TL SG5428 config ip igmp snooping ip igmp snooping interface Description The ip igmp snooping command is used to enable the IGMP Snooping function for the desired port To disable the IGMP Snooping function please use no ip igmp snooping command Syntax ip igmp snooping no ip igmp snooping Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable IGMP Snooping function of port 3 182 TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if ip igmp snooping ip igmp snooping immediate leave Description The ip igmp snooping immediate leave command is used to configure the Fast Leave function for port To disable the Fast Leave function please use no ip igmp snooping immediate leave command Syntax ip igmp snooping immediate leave no ip igmp snooping immediate leave Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the Fast Leave function for port 3 TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if ip igmp snooping immediate leave ip ig
81. al Configuration Mode Example Create a Standard IP ACL whose ID is 120 and add Rule 10 for it In the rule the source IP address is 192 168 0 100 the source IP address mask is 156 255 255 255 0 the time range for the rule to take effect is tRange1 and the packets match this rule will be forwarded by the switch TL SG5428 config access list create 120 TL SG5428 config access list standard 120 rule 10 permit sip 192 168 0 100 smask 255 255 255 0 tseg tRange1 access list extended Description The access list extended command is used to add Extended IP ACL rule To delete the corresponding rule please use no access list extended command Syntax access list extended acl id rule rule id deny permit sip source ip smask source ip mask dip destination ip dmask destination ip mask tseg time segment dscp dscp s port s port d port d port tepflag tcpflag protocol protocol no access list extended acl id rule rule id Parameter acl id The desired Extended IP ACL for configuration rule id The rule ID deny The operation to discard packets permit The operation to forward packets It is the default value source ip The source IP address contained in the rule source ip mask The source IP address mask It is required if you typed the source IP address destination ip The destination IP address contained in the rule destination ip mask
82. alloc dhcp ip address alloc bootp Description The ip address alloc bootp command is used to enable the BOOTP Protocol When the BOOTP Protocol is enabled the switch will obtain IP address from 114 BOOTP Server This command should be configured in the Interface Configuration Mode of the management VLAN Syntax ip address alloc bootp Command Mode Interface Configuration Mode interface vlan Example Enable the BOOTP Protocol to obtain IP address from BOOTP Server when the management VLAN of the switch is VLAN1 TL SG5428 config interface vlan 1 TL SG5428 config if ip address alloc bootp reset Description The reset command is used to reset the switch s software After resetting all configuration of the switch will restore to the factory defaults and your current settings will be lost Syntax reset Command Mode Privileged EXEC Mode Example Reset the software of the switch TL SG5428 reset reboot Description The reboot command is used to reboot the switch To avoid damage please don t turn off the device while rebooting Syntax reboot Command Mode 115 Privileged EXEC Mode Example Reboot the switch TL SG5428 reboot copy running config startup config Description The copy running config startup config command is used to save the current settings Syntax copy running config startup config Command Mode Privileged EXEC Mode Example Save current settings TL SG54
83. and Mode Global Configuration Mode Example Enable the MST Instance 1 and configure its priority as 4096 TL SG5428 config spanning tree mst instance 1 priority 4096 spanning tree mst Description The spanning tree mst command is used to configure MST Instance Port To return to the default configuration of the corresponding Instance Port please use no spanning tree mst command A port can play different roles in different spanning tree instance You can use this command to configure the parameters of the ports in different instance IDs as well as view status of the ports in the specified instance Syntax spanning tree mst instance instance id port priority pri cost cost no spanning tree mst instance instance id 171 Parameter instance id Instance ID ranging from 1 to 8 pri Port Priority which must be multiple of 16 ranging from O to 240 By default it is 128 Port Priority is an important criterion on determining if the port will be chosen as the root port by the device connected to this port cost Path Cost ranging from 0 to 200000 The lower value has the higher priority Its default value is O meaning auto Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure the priority of port 1 in MST Instance 1 as 64 and path cost as 2000 TL SG5428 config interface gigabitEthernet 1 0 1 TL SG5428 config if
84. and its source Syntax show system time Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the time information of the switch TL SG5428 show system time show system time dst Description The show system time dst command is used to display the DST time information of the switch Syntax show system time dst Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the DST time information of the switch TL SG5428 show system time dst show system time ntp Description The show system time ntp command is used to display the NTP mode configuration information Syntax show system time ntp Command Mode Privileged EXEC Mode and Any Configuration Mode 121 Example Display the NTP mode configuration information of the switch TL SG5428 show system time ntp show system info Description The show system info command is used to display system description system name device location system contact hardware version firmware version system time run time and so on Syntax show system info Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the system information TL SG5428 show system info show cable diagnostics interface Description The show cable diagnostics interface command is used to display the cable diagnostics of the connected Ethernet Port which facilitates you to check the connection status of the cab
85. ard re 177 Spanning tree guard dea 177 Spanning tree MCNECK eee 178 show spanning tree active 0 ln nn nn nn nn nnn nln nln iil iii iii iin einen ene 178 show spanning tree bridge 0 0 0 ln nn nn nn nl nl lenin eeee ener 179 show spanning tree interface oooooconnnicocccccnncnconcononocncnncnnoncnnennnnnnnnnnnnnanannnnnnnnnnnaninannnnnncnno 179 show spanning tree Interface Secure 180 Show spanning tree met 181 Chapter 28 IGMP Commands 0000 id rnt rrereenn 182 IPIGMP SHOOPING Global minita A a EE As 182 ip mp snoopipngi intertace eai e E E E a e 182 ip igmp snooping immediate leave oooonccccccnncnnccnnnnnnnnnnnnnnncnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnenininnn 183 ip igmp snooping drop upknown 183 ip igmp snooping vlan config cccececeeceeeeeeeeeeeaeeeeeeeeeeeceeeaaeeeeeeeeeeseeceaeeeeeeseeeseseeuseeeeeees 184 ip igmp snooping multi vlan config oooococcccccccocinonocononcnconcnnnnrnoncnnononnnnnnnnnnnnnnnnnannnnnnnncnnnnos 185 ip igmp snooping filter ad 186 ip igmp snooping fliertolobalt nnee enee 187 ip igmp snooping filter interface ooooocococcncnnnicincccnnncccnnnananancnnnnnnoncnnr ono nnnnnnoncannnnnnnnnnonannns 187 ip igmp snooping filter maxvgroup tnts tetitrtrtntntettrtr tnnt aere ernn nrnn neee ene 188 ip igmp snooping filter mode 188 SHOW IP IGMP SNOOPING d sccnatiaes a Aen esd aan ease ube dhe eet 189 show ip igmp snooping Interface 189 SNOW IP IGMP SNOOPI
86. are two options full duplex mode default and half duplex mode Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure the Duplex Mode as full duplex for port 3 TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if duplex full speed Description The speed command is used to configure the Speed Mode for an Ethernet port To return to the default configuration please use no speed command 126 Syntax speed 10 100 1000 auto no speed Parameter 10 100 1000 auto The speed mode of the Ethernet port There are four options 10Mbps 100Mbps 1000Mbps and Auto negotiation mode default Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure the Speed Mode as 100Mbps for port 3 TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if speed 100 storm control broadcast Description The storm control broadcast command is used to enable the broadcast control function To disable the broadcast control function please use no storm control broadcast command Broadcast control function allows the switch to filter broadcast in the network If the transmission rate of the broadcast packets exceeds the set bandwidth in the storm control rate the packets will be automatically discarded to avoid network broadcast storm Syntax
87. ation can monitor network effectively Syntax rmon history index interface gigabitEthernet port interval seconds owner owner name no rmon history index Parameter index The index number of the entry ranging from 1 to 12 in the format of 1 3 5 port The Ethernet port number 203 seconds The interval to take samplings from the port ranging from 10 to 3600 in seconds By default it is 1800 owner name The owner of the history sample entry ranging from 1 to 16 characters By default it is monitor Command Mode Global Configuration Mode Example Configure the sample port as Gi1 0 2 and the sample interval as 100 seconds for the entry 1 3 TL SG5428 config rmon history 1 3 interface gigabitEthernet 1 0 2 interval 100 owner owner 1 rmon event Description The rmon event command is used to configure the entries of SNMP RMON Event To return to the default configuration please use no rmon event command Event Group as one of the commonly used RMON Groups is used to define RMON events Alarms occur when an event is detected Syntax rmon event index user user name description descript type none log notify log notify owner owner name no rmon event index Parameter index The index number of the event entry ranging from 1 to 12 You can only select one entry for each command user name The name of the User to which the event belongs ranging from 1
88. authPriv authorization and encryption 194 By default the Security Level is noAuthNoPriv There is no need to configure this in SNMP v1 Mode and SNMP v2c Mode read view Select the View to be the Read View The management access is restricted to read only and changes cannot be made to the assigned SNMP View write view Select the View to be the Write View The management access is writing only and changes can be made to the assigned SNMP View The View defined both as the Read View and the Write View can be read and modified notify view Select the View to be the Notify View The management station can receive notification messages of the assigned SNMP view generated by the switch s SNMP agent Command Mode Global Configuration mode Example Add a group and configure the name as group 1 the Security Model as SNMP v3 the security level as authNoPriv the management access to the assigned View viewDefault as read write besides the notification messages sent by View viewDefault can be received by Management station TL SG5428 config snmp server group group1 smode v3 slev authNoPriv read viewDefault write viewDefault notify viewDefault Delete group 1 TL SG5428 config no snmp server group group1 smode v3 slev authNoPriv snmp server user Description The snmp server user command is used to add User To delete the corresponding User please use no snmp server user command The User in an SNMP Gr
89. b CLI or SSH so as to protect the settings of the switch from being randomly changed user name Description The user name command is used to add a new user or modify the existed user s information To delete the existed users please use no user name command Syntax user name user name password password type guest admin status disable enable no user name user name Parameter Username Type a name for users login which contains 16 characters at most composing digits English letters and underlines only password Type a password for users login which contains 16 characters at most composing digits English letters and underlines only guest admin Access level Guest means that you can only view the settings without the right to edit and modify Admin means that you can edit modify and view all the settings of different functions It is admin by default disable enable Enable disable the user The new added user is enabled by default Command Mode Global Configuration Mode Example Add and enable a new admin user named tplink of which the password is password TL SG5428 config user name tplink password password type admin status enable 51 user access control ip based Description The user access control ip based command is used to limit the IP range of the users for login Only the users within the IP range you set here are allowed to login
90. c Description The show mac address table mac command is used to display the information of the specified MAC address Syntax show mac address table mac mac addr Parameter mac addr The specified MAC address 105 Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the information of the MAC address 00 00 00 00 23 00 00 TL SG5428 config show mac address table mac 00 00 00 00 23 00 00 show mac address table vlan Description The show mac address table vlan command is used to display the MAC address configuration of the specified vlan Syntax show mac address table vlan vid Parameter vid The specified VLAN id Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the MAC address configuration of vlan 1 TL SG5428 config show mac address table vlan 1 106 Chapter 20 System Configuration Commande System Configuration Commands can be used to configure the system information and system IP of the switch and to reboot and reset the switch upgrade the switch system and commands used for device diagnose including loopback test and cable test system time manual Description The system time manual command is used to configure the system time manually Syntax system time manual time Parameter time Set the date and time manually in the format of MM DD YYYY HH MM SS Command Mode Global Configuration Mode Example Configure
91. c mode To delete the corresponding periodic mode Time Range please use no periodic command Syntax periodic week date week day time slice1 time slice time slice2 time slice time slice3 time slice time slice4 time slice no periodic week date time slice Parameter week day Periodic Mode in the format of 1 3 6 or daily off day working day 1 3 6 represent Monday Tuesday Wednesday and Saturday daily represents every day off day represents weekend and working day represents working day By default the periodic mode is disabled time slice Create the time slice in the format of HH MM HH MM Command Mode Time range Create Configuration Mode Example Configure the time range tRange1 with time from 8 30 to 12 00 at weekend TL SG5428 config time range tRange1 153 TL SG5428 config time range periodic week date off day time slice1 08 30 12 00 holiday Description The holiday command is used to configure the time range into Holiday Mode under Time range Create Configuration Mode To delete the corresponding Holiday Mode time range please use no holiday command Syntax holiday no holiday Command Mode Time range Create Configuration Mode Example Configure the time range tRange1 into Holiday Mode TL SG5428 config time range tRange1 TL SG5428 config time range holiday holiday global Description The holiday command is used to define a holiday T
92. col based VLAN feature of this port please use no protocol vlan command By default the Protocol based VLAN feature of all ports is disabled Syntax protocol vlan no protocol vlan Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the Protocol based VLAN feature for the Gigabit Ethernet port 3 TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if protocol vlan 25 show protocol vlan template Description The show protocol vlan template command is used to display the information of the Protocol based VLAN templates Syntax show protocol vlan template Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the information of the Protocol based VLAN templates TL SG5428 config show protocol vlan template show protocol vlan vlan Description The show protocol vlan vlan command is used to display the information about Protocol based VLAN entry Syntax show protocol vlan vlan Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display information of the Protocol based VLAN entry TL SG5428 config show protocol vlan vian show protocol vlan interface Description The show protocol vlan interface command is used to display port state and of Protocol based VLAN interface Syntax show protocol vlan interface 26 Command Mode Privileged EXEC Mode and Any Configurat
93. condary NTP server is 139 78 100 163 the fetching rate is 11 hours TL SG5428 config system time ntp UTC 12 00 133 100 9 2 139 79 100 163 11 system time dst predefined Description The system time dst predefined command is used to select a predefined DST configuration and the configuration can be recycled Syntax system time dst predefined USA Australia Europe New Zealand Parameter USA Australia Europe New Zealand Predefined DST mode with four options USA Australia Europe and New Zealand By default the setting is Europe The DST time periods which the four predefined DST mode represents are displayed as follow USA Second Sunday in March 02 00 First Sunday in November 02 00 Australia First Sunday in October 02 00 First Sunday in April 03 00 Europe Last Sunday in March 01 00 Last Sunday in October 01 00 New Zealand Last Sunday in September 02 00 First Sunday in April 03 00 Command Mode Global Configuration Mode Example Configure the DST period of the switch as Europe TL SG5428 config system time dst predefined Europe system time dst date 109 Description The system time dst date command is used to specify the DST configuration in Date mode This configuration is one off in use By default the current year is used as the starting time DST time periods should be within 12 months over one two year Syntax system time dst date smonth sday stime
94. d to configure the login of a switch with the user name and password admin admin Syntax login local Command Mode Line Configuration Mode Example Configure the login of virtual terminal connection 0 5 as login local mode TL SG5428 config line vty 0 5 TL SG5428 config line login local Configure the login of Console port connection 0 as login local mode TL SG5428 config line console 0 TL SG5428 config line login local show user account list Description The show user account list command is used to display the information of the current users 57 Syntax show user account list Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the information of the current users TL SG5428 config show user account list show user configuration Description The user configuration command is used to display the security configuration information of the users including access control max number and the idle timeout etc Syntax show user configuration Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the security configuration information of the users TL SG5428 config show user configuration 58 Chapter 11 Binding Table Commands You can bind the IP address MAC address VLAN and the connected Port number of the Host together which can be the condition for the ARP Inspection to filter the packets ip source binding Description The ip source bi
95. de IP datagram into 64 priorities When DSCP Priority is enabled IP datagram are mapped to different priority levels based on DSCP priority mode non IP datagram with IEEE 802 1Q tag are mapped to different priority levels based on 137 IEEE 802 1P priority mode if IEEE 802 1P Priority is enabled the untagged non IP datagram are mapped based on port priority mode Syntax qos queue dscp map dscp list cos id no qos queue dscp map Parameter dscp list List of DSCP value One or several DSCP values can be typed using comma to separate Use a hyphen to designate a range of values for instance 1 4 7 11 indicates choosing 1 4 5 6 7 11 The DSCP value ranges from 0 to 63 cos id The priority level the packets with tag are mapped to which ranges from CoS 0 to CoS 7 Command Mode Global Configuration Mode User Guidelines By default the mapping relation between tag and the egress queue is 0 7 CoS 0 8 15 CoS 1 16 23 CoS 2 24 31 CoS 3 32 39 CoS 4 40 47 CoS 5 48 55 CoS 6 56 63 CoS 7 Example Map DSCP values 10 12 to CoS 2 TL SG5428 config qos queue dscp map 10 12 2 qos queue mode Description The qos queue mode command is used to configure the Schedule Mode To return to the default configuration please use no qos queue mode command When the network is congested the program that many packets complete for resources must be solved usually in the way of queue scheduling The switch will
96. e network nodes and implement the proper operation snmp server Description The snmp server command is used to enable the SNMP function By default it is disabled To return to the default configuration please use no snmp server command Syntax snmp server no snmp server Command Mode Global Configuration Mode Example Enable the SNMP function TL SG5428 config snmp server snmp server view Description The snmp server view command is used to add View To delete the corresponding View please use no snmp server view command The OID Object Identifier of the SNMP packets is used to describe the managed objects of the switch and the MIB Management Information Base is the set of the OIDs The SNMP View is created for the SNMP management station to manage MIB objects Syntax snmp server view name mib oid include exclude no snmp server view name mib oid Parameter name The entry name of View ranging from 1 to 16 characters Each View includes several entries with the same name 193 mib oid MIB Object ID It is the Object Identifier OID for the entry of View ranging from 1 to 61 characters include exclude View Type with include and exclude options They represent the view entry can cannot be managed by the SNMP management station individually Command Mode Global Configuration Mode Example Add a View named view1 configuring the OID as 1 3 6 1 6 3 20 and this OID can be mana
97. e and Any Configuration Mode Example Display the protect information of all ports TL SG5428 config show spanning tree interface security Display the protect information of port 1 TL SG5428 config show spanning tree interface security gigabitEthernet 1 0 1 Display the interface security bpdufilter information TL SG5428 config show spanning tree interface security bpdufilter 180 show spanning tree mst Description The show spanning tree mst command is used to display the related information of MST Instance Syntax show spanning tree mst configuration digest instance instance id interface gigabitEthernet port II Parameter instance id Instance ID desired to show ranging from 1 to 8 port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the region information and mapping information of VLAN and MST Instance TL SG5428 config show spanning tree mst configuration Display the related information of MST Instance 1 TL SG5428 config show spanning tree mst instance 1 Display all the ports information of MST Instance 1 TL SG5428 config show spanning tree mst instance 1 interface 181 Chapter 28 IGMP Commande IGMP Snooping Internet Group Management Protocol Snooping is a multicast control mechanism running on Layer 2 switch It can effectively prevent multicast groups being broadcasted in the network ip igmp snooping glob
98. e name command is used to configure the region name of MST instance Syntax name name Parameters name The region name used to identify MST region It ranges from 1 to 32 characters Command Mode MST Configuration Mode Example Configure the region name of MST as region1 TL SG5428 config spanning tree mst configuration TL SG5428 config mst name region revision Description The revision command is used to configure the revision level of MST instance Syntax revision revision Parameters revision The revision level for MST region identification ranging from 0 to 65535 Command Mode MST Configuration Mode Example Configure the revision level of MST as 100 170 TL SG5428 config spanning tree mst configuration TL SG5428 config mst revision 100 spanning tree mst instance Description The spanning tree mst instance command is used to configure the priority of MST instance To return to the default value of MST instance priority please use no spanning tree mst instance command Syntax spanning tree mst instance instance id priority pri no spanning tree mst instance instance id priority Parameter instance id Instance ID ranging from 1 to 8 pri MSTI Priority which must be multiple of 4096 ranging from 0 to 61440 By default it is 32768 MSTI priority is an important criterion on determining if the switch will be chosen as the root bridge in the specific instance Comm
99. e value of Flow Control The options are 0 5 10 15 20 25 30 packet second The default value is 0 which stands for disable 65 Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Set the Flow Control of port 2 as 20 pps TL SG5428 config interface gigabitEthernet 1 0 2 TL SG5428 config if ip dhcp snooping limit rate 20 ip dhcp snooping decline Description The ip dhcp snooping decline command is used to enable the Decline Protect feature To disable the Decline Protect feature please use no ip dhcp snooping decline command Syntax ip dhcp snooping decline no ip dhcp snooping decline Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the Decline Protect feature of port 2 TL SG5428 config interface gigabitEthernet 1 0 2 TL SG5428 config if ip dhcp snooping decline show ip source binding Description The show ip source binding command is used to display the IP MAC VID PORT binding table Syntax show ip source binding 66 Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the IP MAC VID PORT binding table TL SG5428 config show ip source binding show ip dhcp snooping Description The show ip dhcp snooping command is used to display the running status of DHCP Snooping Syntax show ip dhcp snooping Command Mode Privileged
100. eating or ARP Attack Chapter 13 IP Verify Source Commands Provide information about the commands used for guarding the IP Source by filtering the IP packets based on the IP MAC Binding entries Chapter 14 DoS Defend Command Provide information about the commands used for DoS defend and detecting the DoS attack Chapter 15 IEEE 802 1X Commands Provide information about the commands used for configuring IEEE 802 1X function Chapter 16 System Log Commands Provide information about the commands used for configuring system log Chapter 17 SSH Commands Provide information about the commands used for configuring and managing SSH Security Shell Chapter 18 SSL Commands Provide information about the commands used for configuring and managing SSL Secure Sockets Layer Chapter 19 MAC Address Commands Provide information about the commands used for Address configuration Chapter 20 System Configuration Commands Provide information about the commands used for configuring the System information and System IP reboot and reset the switch upgrade the switch system and commands used for device diagnose including loopback test and cable test Chapter 21 Ethernet Configuration Commands Provide information about the commands used for configuring the Bandwidth Control Negotiation Mode and Storm Control for ethernet ports Chapter 22 QoS Commands Provide information about the commands used for configuring the QoS functio
101. ed to enable the flow control function for a port To disable the flow control function for this corresponding port please use no flow control command With the flow control function enabled the Ingress Rate and Egress Rate can be synchronized to avoid packet loss in the network Syntax flow control no flow control Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the flow control function for port 3 TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if flow control media type Description The media type command is used to configure the media type of Combo port For a Combo port the media type should be configured before you set its speed and mode This command does not apply to TL SG5428 since TL SG5428 has no Combo port Syntax media type 1 45 sfp 125 Parameter rj45 sfp Media type Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure the media type of Combo port 9T as SFP TL SG5412F config interface gigabitEthernet 1 0 9 TL SG5412F config if media type sfp duplex Description The duplex command is used to configure the Duplex Mode for an Ethernet port To return to the default configuration please use no duplex command Syntax duplex full half no duplex Parameter full half The duplex mode of the Ethernet port There
102. eeeseseceeseeeeeeeseseensaaees 79 dot x quiet perlOd EE 80 dotix Meu E 80 dotixM x T6 JUNTO miii 81 MM A Aetna ia enna ee 81 dot1x ouest vlantiintertacel ttet ttttttn ttrt tett tttn rne nte ertr EEEE EEst erE nern rner erreren 82 ele ak deel OO O EE 82 dottx port method isis ii AAA AAA AA ee A at 83 le TC 84 radius server aCCounmt nono nono nnnn nn nn n nro sees EEEE nn nnnnrnnnrnnnrnnnrnnncnnncnnnnnnnnnnnss 85 NS 85 Show dottx En El 86 ShOW TAdIUS ACCOUNT ide dal 86 show radius authentication 0 nono ttet nono Ett nn nr nnnn nn nn nnnnnnnnnnnrnnnnnnnnnnnnnnnnnnnos 87 Chapter 16 System Log COMMAMAS cccceece cece cece eee e eee e eee e eter eeeeeeeeeeeeeeeeeeeeeeees 88 NN EE 88 logging le datada AA E a A tines 89 e Tele Le tt lit isis 89 logging NOSt INEX cc eecececeeeeeeeeaeee aces aeee aces nace aeeeaeeeaeeeaeeeaeeeaeeeaeeeaeeeaeeaaeeaaeeaaeeaaeeaaeeaaeeaaeeanees 90 show logging local COnfig ccccccceeceeceeeeeeeeeeeeceeceneeceeeeeeeesececaaeeeeeeeeeesenqcieeseeeeeeesesnenaeaees 91 Show lOQGging ee le EE 91 Ne Oe et Unie butter rica A eed ee A A de 91 SHOW logging BU EE 92 Chapter 17 SSH EIDEN El EA AA TIA TAS da EAT 93 TA ein Meeks rad eege Eege O eege 93 IPS VEIS i 93 IPS la e E 94 P SSA MaX CENE e aiara a a a rie re e aaa a aaa e a aE a ra e aui EEEa 94 p Ssh dOWNlOAd s cocorotorcico A SS E ESTS E T S S 95 SNOWIPSS Pirana A AS 95 Chapter 18 SSL CommandS usina ee iia nde 97 ip h
103. egistration Parameter normal fixed forbidden Registration mode By default the registration mode is normal Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure the GVRP registration mode on ports 2 6 to fixed TL SG5428 config interface range gigabitEthernet 1 0 2 6 TL SG5428 config if range gvrp registration fixed gvrp timer Description The gvrp timer command is used to set a GVRP timer for the desired port To restore to the default setting of a GARP timer please use no gvrp timer command Syntax gvrp timer leaveall join leave value 43 no gvrp timer leaveall join leave Parameter leaveall join leave They are the three timers leave All join and leave Once the LeaveAll Timer is set the port with GVRP enabled can send a LeaveAll message after the timer times out so that other GARP ports can re register all the attribute information After that the LeaveAll timer will start to begin a new cycle To guarantee the transmission of the Join messages a GARP port sends each Join message two times The Join Timer is used to define the interval between the two sending operations of each Join message Once the Leave Timer is set the GARP port receiving a Leave message will start its Leave timer and deregister the attribute information if it does not receive a Join message again before the timer tim
104. enable command is used to enable the dot1q tunnel feature on specified interface s To disable this function on specified interface s please use the no switchport dot1q tunnel enable command By default no interface has been configured with dot1q tunnel function Syntax switchport dot1q tunnel enable no switchport dot1q tunnel enable Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the dot1q tunnel function on the Gigabit Ethernet port 3 TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if switchport dot1q tunnel enable switchport dot1q tunnel mode uplink Description The switchport dot1q tunnel mode uplink command is used to configure a specified port as the VPN Up link port To cancel this VPN Up link port please use the no switchport dot1q tunnel mode uplink command By default no 29 port has been configured as the VPN Up link port Syntax switchport dot1q tunnel mode uplink no switchport dot1q tunnel mode uplink Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure the Gigabit Ethernet port 3 as the VPN Up link ports TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if switchport dot1q tunnel mode uplink show dot1q tunnel Description The show dot1q tunnel command is used to display the global configuration info
105. ent positions log buffer and log file The log buffer indicates the RAM for saving system log and the information in the log buffer can be got by show logging buffer command It will be lost when the switch is restarted Syntax logging buffer evel no logging buffer Parameter level Severity level of the log information output to each channel There are 8 severity levels marked with values 0 7 The smaller value has the higher priority Only the log with the same or smaller severity level value will be output By default it is 7 indicating that all the log information will be saved in the log buffer Command Mode Global Configuration Mode Example Set the severity level as 6 TL SG5428 config logging buffer 6 88 logging file flash Description The logging file flash command is used to configure the level and the status of the log file input To disable the logging file flash funtion please use no logging file flash command The log file indicates the flash sector for saving system log The information in the log file will not be lost after the switch is restarted and can be got by the show logging flash command Syntax logging file flash level no logging file flash Parameter level Severity level of the log information output to each channel There are 8 severity levels marked with values 0 7 The smaller value has the higher priority Only the log with the same or smaller severity level value will be
106. ent type Description The ip dos prevent type command is used to select the DoS Defend Type To disable the corresponding Defend Type please use no ip dos prevent type command Syntax ip dos prevent type scan synfin xma scan null scan port less 1024 ping flood syn flood no ip dos prevent type scan synfin xma scan null scan port less 1024 ping flood syn flood 76 Parameter scan synfin Scan SYNFIN attack xma scan Xma Scan attack null scan NULL Scan attack port less 1024 The SYN packets whose Source Port less than 1024 ping flood Ping flooding attack With the ping flood attack enabled the switch will limit automatically the forwarding speed pf ping packets to 512K when attacked by ping flood syn flood SYN SYN ACK flooding attack With the syn flood attack enabled the switch will limit automatically the forwarding speed pf ping packets to 512K when attacked by syn flood Command Mode Global Configuration Mode Example Enable the DoS Defend Type named Xma Scan attack TL SG5428 config ip dos prevent type xma scan show ip dos prevent Description The show ip dos prevent command is used to display the DoS information of the detected DoS attack including enable disable status the DoS Defend Type Syntax show ip dos prevent Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the DoS information of the detected
107. er Guidelines Command in the Interface Range gigabitEthernet Mode is executed independently on all ports in the range It does not affect the execution on the other ports at all if the command results in an error on one port Example To enter the Interface range gigabitEthernet Configuration Mode and configure ports 1 2 3 6 7 and 9 at the same time by adding them to one port list TL SG5428 config interface range gigabitEthernet 1 0 1 3 1 0 6 7 1 0 9 description Description The description command is used to add a description to the Ethernet port To clear the description of the corresponding port please use no description command Syntax description string no description Parameter string Content of a port description ranging from 1 to 16 characters Command Mode Interface Configuration Mode interface gigabitEthernet Example Add a description Port 5 to port 5 TL SG5428 config interface gigabitEthernet 1 0 5 TL SG5428 config if description Port 5 shutdown Description The shutdown command is used to disable an Ethernet port To enable this port again please use no shutdown command Syntax shutdown no shutdown 124 Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Disable port 3 TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if shutdown flow control Description The flow control command is us
108. er mode accept show ip igmp snooping Description The show ip igmp snooping command is used to display the global configuration of IGMP snooping Syntax show ip igmp snooping Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the global configuration of IGMP TL SG5428 show ip igmp snooping show ip igmp snooping interface Description The show ip igmp snooping interface command is used to display the port configuration of IGMP snooping 189 Syntax show ip igmp snooping interface gigabitEthernet port port list basic config filter packet stat Parameter port The Ethernet port number port list The list of Ethernet ports basic config filter packet stat The related configuration information selected to display Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the IGMP filter configuration of all ports TL SG5428 show ip igmp snooping interface gigabitEthernet filter Display the IGMP basic configuration of port 2 TL SG5428 show ip igmp snooping interface gigabitEthernet 1 0 2 basic config Display the IGMP packet statistics of ports 1 4 TL SG5428 show ip igmp snooping interface gigabitEthernet 1 0 1 4 packet stat show ip igmp snooping vlan Description The show ip igmp snooping vlan command is used to display the VLAN configuration of IGMP snooping Syntax show ip igmp snooping vlan vian id Parameter
109. erface gigabitEthernet interface range gigabitEthernet 71 Example Restore port 5 to the ARP transmit status TL SG5428 config interface gigabitEthernet 1 0 5 TL SG5428 config if ip arp inspection recover show ip arp inspection Description The show ip arp inspection command is used to display the ARP detection global configuration including the enable disable status and the Trusted Port list Syntax show ip arp inspection Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the ARP detection configuration globally TL SG5428 config show ip arp inspection show ip arp inspection interface Description The show ip arp inspection interface command is used to display the interface configuration of ARP detection Syntax show ip arp inspection interface gigabitEthernet port Parameter port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration of all the ports 72 TL SG5428 config show ip arp inspection interface Display the configuration of port 2 TL SG5428 config show ip arp inspection interface gigabitEthernet 1 0 2 show ip arp inspection statistics Description The show ip arp inspection statistics command is used to display the number of the illegal ARP packets received Syntax show ip arp inspection statistics Command Mode Privileged EXEC Mode and Any Configuration Mode Example
110. ering IP range please use no ip igmp snooping filter command Syntax ip igmp snooping filter id start ip end ip no ip igmp snooping filter id Parameter id P range ID ranging from 1 to 30 start ip The start multicast IP of the IP range end ip The end multicast IP of the IP range Command Mode Global Configuration Mode Example Modify the multicast IP range whose ID is 3 as 225 1 1 1 226 3 2 1 TL SG5428 config ip igmp snooping filter 3 225 1 1 1 226 3 2 1 ip igmp snooping filter interface Description The ip igmp snooping filter command is used to configure Port Filter To return to the default configuration please use no igmp snooping filter command When the switch receives IGMP report message it examines the multicast filtering IP ID configured on the access port to determine if the port can join the multicast group If the multicast IP is not filtered the switch will add the port to the forward port list of the multicast group Otherwise the switch will drop the IGMP report message In that way you can control the multicast groups that users Can access 187 Syntax ip igmp snooping filter no ip igmp snooping filter Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable IGMP Snooping filter function for port 3 TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if ip igmp snooping filter ip igmp
111. erity level value will be sent to the corresponding log host By default it is 6 indicating that the log information marked with 0 6 will be sent to the log host Command Mode Global Configuration Mode Example Enable log host 2 and set its IP address as 192 168 0 148 the level 5 TL SG5428 config logging host index 2 192 168 0 148 5 90 show logging local config Description The show logging local config command is used to display the configuration of the Local Log including the log buffer and the log file Syntax show logging local config Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration of the Local Log TL SG5428 config show logging local config show logging loghost Description The show logging loghost command is used to display the configuration of the log host Syntax show logging loghost index Parameter index The index of the log host whose configuration will be displayed ranging from 1 to 4 Display the configuration of all the log hosts by default Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration of the log host 2 TL SG5428 config show logging loghost 2 show logging buffer Description 91 The show logging buffer command is used to display the log information in the log buffer according to the severity level Syntax show logging buffer level eve Parameter level
112. ernet 1 0 4 7 show bandwidth Description The show bandwidth command is used to display the bandwidth limit information of Ethernet ports Syntax 133 show bandwidth interface gigabitEthernet port range gigabitEthernet port list y Parameter port The Ethernet port number port list The list of the Ethernet ports Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the bandwidth limit information of port 4 TL SG5428 config show bandwidth interface gigabitEthernet 1 0 4 134 Chapter 22 QoS Commande QoS Quality of Service function is used to optimize the network performance It provides you with network service experience of a better quality qos Description The qos command is used to configure CoS Class of Service based on port To return to the default configuration please use no qos command Syntax qos cos id no qos Parameter cos id The priority of port It ranges from O to 7 which represent CoS0 CoS7 respectively By default the priority is 0 Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet User Guidelines Port priority is one property of the port When the port priority is specified the data will be classified into the egress queue based on the CoS value of the ingress port and the mapping relation between the CoS and TC in IEEE 802 1P Example Configure the priority of
113. es 48 show etherchannel oad balance nennen 49 SNOW ACD NEE 49 Show lacp SySeld WEE 50 Chapter 10 User Manage Commande 51 WISER NAME Eeer E 51 user access control phase 52 user access control machased AAA 52 user access control port based AAA 53 deu Tu Le 54 USEF e EE 54 NNN Gs ace deg A eege Eege ege EN eebe 55 E E O e 56 Kole l DEAE E E da ten td face crea eines ated on Dh ee ae ected Dn eee hae deed ane a deere ten adnate 56 A O OS aa EARE ENA Pa o 57 SNOW USErACCOUNTHIST Asse til 57 show User Configuration cece ceeeeteceenaeeeeeeeeeeeecaaaeaeeeseeeeseceeaeaeeseeeeeeesseneeaeaees 58 Chapter 11 Binding Table Commande 59 IP SOULCE DINGING E 59 eelere SNOOPING EE 60 P ahe Kul el elle Be UE 61 ip dhcp snooping information option 62 ip dhcp snooping information strategy cccocococccccccccccconaanonnnnnnnocnnnannnnnnnnnnonnonannnnnnnnnnnnnaninnnnes 62 ip dhcp snooping information remote jd rner ttte renn rnen eeren 63 ip dhcp snooping information circuit id ooocooinccoccccnnnccnocononoccnnncnnoncnnrnnnnnnnnnnoncnnnnnnnnnanoninnns 63 ip dhep Snooping trust EE 64 Ip dhcp snooping MAC VeErify eee aane aaan A aAa area ae aiaa Eae EN eSa ARETES 65 ip dhcp snooping limit Fate oo ooooccncccncccncccnnccncconnconnnonnnonnnonononononononononnnonnconnconnconocononinnss 65 ip dhcp snooping decline o oooccccccccnnncnnncnnncnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnannns 66 S
114. es out value The value of the timer The LeaveAll Timer ranges from 1000 to 30000 centiseconds and the default value is 1000 The Join Timer ranges from 20 to 1000 centiseconds and the default value is 20 The Leave Timer ranges from 60 to 3000 centiseconds and the default value is 60 Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Set the GARP leaveall timer of port 6 to 2000 centiseconds and restore to the join timer of it to the default value TL SG5428 config interface gigabitEthernet 1 0 6 TL SG5428 config if gvrp timer leaveall 2000 TL SG5428 config if no gvrp timer join show gvrp global Description The show gvrp global command is used to display the global GVRP status Syntax show gvrp global Command Mode Privileged EXEC Mode and Any Configuration Mode 44 Example Display the global GVRP status TL SG5428 config show gvrp global show gvrp interface Description The show gvrp interface command is used to display the GVRP configuration information of all ports or a specified Ethernet port Syntax show gvrp interface gigabitEthernet port Parameter port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the GVRP configuration information of all Ethernet ports TL SG5428 config show gvrp interface Display the GVRP configuration information of port 2
115. escription The private vlan primary command is used to configure the designated VLAN as the primary VLAN of the Private VLAN To abolish the currently primary VLAN please use no private vlan primary command Syntax private vlan primary no private vlan primary Command Mode VLAN Configuration Mode VLAN Example Configure the VLAN 3 as the primary VLAN of the private VLAN TL SG5428 config vlan 3 TL SG5428 config vlan private vlan primary private vlan secondary Description The private vlan secondary command is used to configure the designated VLAN as the secondary VLAN of the Private VLAN To invalid the current secondary VLAN please use no private vlan secondary command Syntax private vlan secondary no private vlan secondary 37 Command Mode VLAN Configuration Mode VLAN Example Configure the VLAN 4 as the sencondary VLAN of the private VLAN TL SG5428 config vlan 4 TL SG5428 config vlan private vlan secondary private vlan association Description The private vlan association command is used to associate primary VLAN with secondary VLAN To exterminate the currently association please use no private vlan association command Syntax private vlan association vian_list no private vlan association vian_list Parameter vlan_list Secondary VLAN ID ranging from 2 to 4049 Command Mode VLAN Configuration Mode VLAN Example Associate primary VLAN 3 with secondary VLAN 4 as a private VLAN TL SG54
116. estore to the default timeout time please use no user idle timeout command Syntax user idle timeout minutes no user idle timeout 54 Parameter minutes The timeout time ranging from 5 to 30 in minutes The value is 10 by default Command Mode Global Configuration Mode Example Configure the timeout time of the switch as 15 minutes TL SG5428 config user idle timeout 15 line Description The line command is used to enter the Line Configuration Mode and make related configurations for the desired user s including the login mode and password configurations Syntax line console inenum vty startlinenum endlinenum Parameter linenum The serial number of the console port Its value is 0 in general as there is only one console port on a switch startlinenum The start serial number of the login user selected to configure the login mode and password ranging from O to 15 O means the first login user number 1 means the second and the rest can be done in the same manner endlinenum The end serial number of the login user selected to configure the login mode and password ranging from O to 15 O means the first login user number 1 means the second and the rest can be done in the same manner Command Mode Global Configuration Mode Example Enter the Console port configuration mode and configure the console port 0 TL SG5428 config line console 0 Enter the Virtual Terminal configura
117. face status Display the connective status of port 1 TL SG5428 config show interface gigabitEthernet 1 0 1 status show interface counters Description The show interface counters command is used to display the statistic information of all ports or an Ethernet port Syntax show interface gigabitEthernet port counters Parameter port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the statistic information of all Ethernet ports TL SG5428 config show interface counters Display the statistic information of port 2 TL SG5428 config show interface gigabitEthernet 1 0 2 counters show interface description Description The show interface description command is used to display the description of all ports or an Ethernet port Syntax show interface gigabitEthernet port description 131 Parameter port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the description of all Ethernet ports TL SG5428 config show interface description Display the description of port 2 TL SG5428 config show interface gigabitEthernet 1 0 2 description show interface flowcontrol Description The show interface flowcontrol command is used to display the flow control information of an Ethernet port Syntax show interface gigabitEthernet port flowcontrol Parameter port The Etherne
118. ficate named ssl cert from TFTP server with the IP Address of 192 168 0 146 TL SG5428 config ip http secure server download certificate ssl cert ip address 192 168 0 146 ip http secure server download key Description The ip http secure server download key command is used to download a SSL key to the switch from TFTP server Syntax ip http secure server download key ss key ip address p addr Parameter ssl key The name of the SSL key which is selected to download to the switch The length of the name ranges from 1 to 25 characters The key must be BASE64 encoded ip addr The IP address of the TFTP server Command Mode Global Configuration Mode Example Download a SSL key named ssl key from TFTP server with the IP address of 192 168 0 146 TL SG5428 config ip http secure server download key ssl key ip address 192 168 0 146 98 show ip http secure server Description The show ip http secure server command is used to display the global configuration of SSL Syntax show ip http secure server Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the global configuration of SSL TL SG5428 config show ip http secure server 99 Chapter 19 MAC Address Commande MAC Address configuration can improve the network security by configuring the Port Security and maintaining the address information by managing the Address Table mac address table static Description T
119. from this switch Aging Time ranges from 5 to 255 in seconds By default it is 180 Command Mode Global Configuration Mode Example Enable NDP function globally and configure Aging Time as 120 seconds Hello Time as 50 seconds TL SG5428 config cluster ndp 218 TL SG5428 config cluster ndp timer hello 50 aging 120 Change Aging Time to 80 seconds TL SG5428 config cluster ndp timer aging 80 Change Hello Time to 80 seconds TL SG5428 config cluster ndp timer hello 80 cluster ntdp Description The cluster ntdp command is used to configure NTDP globally To return to the default configuration please use no cluster ntdp command NTDP Neighbor Topology Discovery Protocol is used to collect the NDP information and neighboring connection information of each device in a specific network range It provides the commander switch with the information of devices which can join the cluster and collects topology information of devices within the specified hops Syntax cluster ntdp cluster ntdp timer interval time time hop delay value port delay value cluster ntdp hop hop value no cluster ntdp no cluster ntdp timer interval time time hop delay value port delay value no cluster ntdp hop hop value Parameter time NTDP Interval Time which is the interval to collect topology information NTDP Interval Time ranges from 1 to 60 in minutes By default it is 1 hop delay value NTDP Hop Delay
120. ged by the SNMP management station TL SG5428 config snmp server view view1 1 3 6 1 6 3 20 include snmp server group Description The snmp server group command is used to manage and configure the SNMP group To delete the corresponding SNMP group please use no snmp server group command SNMP v3 provides the VACM View based Access Control Model and USM User Based Security Model mechanisms for authentication The users in the SNMP Group can manage the device via the Read View Write View and Notify View And the authentication mode and the privacy mode guarantee the high security for the communication between the management station and the managed device Syntax snmp server group name smode v1 v2c v3 slev noAuthNoPriv authNoPriv authPriv read read view write write view notify notify view no snmp server group name smode v1 v2c v3 slev noAuthNoPriv authNoPriv authPriv Parameter name The SNMP Group name ranging from 1 to 16 characters The Group Name Security Model and Security Level compose the identifier of the SNMP Group These three items of the Users in one group should be the same smode Security Model with vi v2c and v3 options They represent SNMP v1 SNMP v2c and SNMP v3 slev The Security Level of SNMP v3 Group There are three options including noAuthNoPriv no authorization and no encryption authNoPriv Cauthorization and no encryption and
121. gigabitEthemet Example Enable the IP Verify Source function for gigabitEthernet ports 5 10 Configure that only the packets with its source IP address source MAC address and port number matched to the IP MAC binding rules can be processed TL SG5428 config interface range gigabitEthernet 1 0 5 10 TL SG5428 config if range ip verify source sip mac show ip verify source Description The show ip verify source command is used to display the IP Verify Source 74 configuration information Syntax show ip verify source Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the IP Verify Source configuration information TL SG5428 config show ip verify source 75 Chapter 14 DoS Defend Command DoS Denial of Service Attack is to occupy the network bandwidth maliciously by the network attackers or the evil programs sending a lot of service requests to the Host With the DoS Defend enabled the switch can analyze the specific field of the received packets and provide the defend measures to ensure the normal working of the local network ip dos prevent Description The ip dos prevent command is used to enable the DoS defend function globally To disable the DoS defend function please use no ip dos prevent command Syntax ip dos prevent no ip dos prevent Command Mode Global Configuration Mode Example Enable the DoS defend function globally TL SG5428 config ip dos prevent ip dos prev
122. he actual number in the binding table not arranged in an order 59 Command Mode Global Configuration Mode Example Bind an entry with the IP 192 168 0 1 MAC 00 00 00 00 00 01 VLAN ID 2 and Port number 5 manually And then enable the entry for the ARP detection TL SG5428 config ip source binding host1 192 168 0 1 00 00 00 00 00 01 vlan 2 interface gigabitEthernet 1 0 5 arp detection Delete the IP MAC VID PORT entry with the index 5 TL SG5428 config no ip source binding index 5 ip dhcp snooping Description The ip dhcp snooping command is used to enable DHCP Snooping function globally To disable DHCP Snooping function globally please use no ip dhcp snooping command DHCP Snooping functions to monitor the process of the Host obtaining the IP address from DHCP server and record the IP address MAC address VLAN and the connected Port number of the Host for automatic binding The switch can also propagate the control information and the network parameters via the Option 82 field to provide more information for the Host Syntax ip dhcp snooping no ip dhcp snooping Command Mode Global Configuration Mode Example Enable the DHCP Snooping function globally TL SG5428 config ip dhcp snooping 60 ip dhcp snooping global Description The ip dhcp snooping global command is configure DHCP Snooping globally To restore to the default value please use no ip dhcp snooping global command Syntax ip dhcp snoopi
123. he mac address table static command is used to add the static MAC address entry To remove the corresponding entry please use no mac address table static command The static address can be added or removed manually independent of the aging time In the stable networks the static MAC address entries can facilitate the switch to reduce broadcast packets and enhance the efficiency of packets forwarding remarkably Syntax mac address table static mac mac addr vid vid interface gigabitEthernet port no mac address table static mac mac addr vid vid mac mac addr vid vid interface gigabitEthernet port Parameter mac addr The MAC address of the entry you desire to add vid The VLAN ID number of your desired entry lt ranges from 1 to 4094 port The Ethernet port number of your desired entry Command Mode Global Configuration Mode Example Add a static Mac address entry to bind the MAC address 00 02 58 4f 6c 23 VLAN1 and port 1 together TL SG5428 config mac address table static mac 00 02 58 4f 6c 23 vid 1 interface gigabitEthernet 1 0 1 100 mac address table aging time Description The mac address table aging time command is used to configure aging time for the dynamic address To return to the default configuration please use no mac address table aging time command Syntax mac address table aging time aging time no mac address table aging time Parameter aging time The aging time for the dynamic
124. he protocol template composing of 4 Hex integers template idx The number of the Protocol based VLAN Template You can get the template corresponding to the number by the show protocol vlan template command Command Mode Global Configuration Mode Example Create a Protocol based VLAN template named TP whose Ethernet protocol type is 0x2024 TL SG5428 config protocol vian template name TP ether type 2024 protocol vlan vlan Description The protocol vlan vlan command is used to create a Protocol based VLAN To delete a Protocol based VLAN please use no protocol vlan command Syntax protocol vlan vlan vian id template template idx y 24 no protocol vlan vlan group idx Parameter vlan vid Specify IEEE 802 1Q VLAN ID ranging from 1 4094 template idx The number of the Protocol based VLAN Template You can get the template corresponding to the number by the show protocol vlan template command group idx The number of the Protocol based VLAN entry You can get the Protocol based VLAN entry corresponding to the number by the show protocol vlan vlan command Command Mode Global Configuration Mode Example Create Protocol based VLAN 2 and bind it with Protocol based VLAN Template 3 TL SG5428 config protocol vlan vian 2 template 3 protocol vlan Description The protocol vlan command is used to enable the Protocol based VLAN feature for a specified port To disable the Proto
125. hich include four types linkup linkdown warmstart and coldstart To disable the sending of SNMP standard traps please use no snmp server traps snmp command 199 Syntax snmp server traps snmp linkup linkdown warmstart coldstart no snmp server traps snmp linkup linkdown warmstart coldstart Parameter linkup Enable linkup trap It is sent when port status changes from linkdown to linkup By default it is enabled linkdown Enable linkdown trap It is sent when port status changes from linkup to linkdown By default it is enabled warmstart Enable warmstart trap It is sent upon SNMP function reboot By default it is enabled coldstart Enable coldstart trap It is sent upon switch reboot By default it is enabled Command Mode Global Configuration Mode Example Enable SNMP standard linkup trap for the switch TL SG5428 config snmp server traps snmp linkup snmp server traps link status Description The snmp server traps link status command is used to enable SNMP link status trap for the specified port To disable the sending of SNMP link status trap please use no snmp server traps link status command Syntax snmp server traps link status no snmp server traps link status Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable SNMP link status trap for port 3 TL SG5428 config interface gigabi
126. ia AA Ge Hie heen ies ae es 127 tel eelnl rei Bn VU der E EE 128 storm control UNICAST eee nnnnnnnnnnnnnns 128 storm control rate 0 cece eee eee etette tettet eee eee aaa eee eee aaa nnnonnrnnnnnnnnnss 129 bandwidths ica 129 clear ein EE 130 Ne Oe eer TEE 130 Ge Olne 131 show interface description 131 show interface flowcontrol cccceceeeceecceeeeeeeeeeeceecaeeeeeeeeeeseaaaeeeeeeeeeesesecueeseeeeeeeeseneneaees 132 show interface configuration cccccceceeceeeeceeeeeeeceeceneeeeeeeeeeseceaeeeeeeeeeeseeeceseaeeeeeeesseeeeaeaees 132 Me UE TR eene EE 133 SNOW DAN AYALO L2 p E 133 Chapter 22 QoS Commande AA 135 OS EE 135 let 135 le Ce e A AAA A a ieee 136 dos queue cds MAD ina ia 136 GOS QUSUSOS CO MAP E 137 lte ITT EE 138 lee Le Enn xiii rr oca 139 Cl Ve ee Ee ii A es 140 SNOW GOS dSCp Map EE 140 SNOW GOS QUEUC le ET 140 SNOW GOS E 141 Chapter 23 Port Mirror Commandes 142 monitor session destination interface ooooooninnnnociccnnnccccnnnnononcnnncnononnnnnnnnnnnnnoninnnnnnnnnnnnninnns 142 monitor session source Interface 143 SHOW MONITOF SESSION test c ir 144 Chapter 24 Port Isolation Commande oooooooncccccoconccononononnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 145 LOIA ELO Ee EA EA chee pagatmemee cacee tek ang ned coed te eweeenthces antes E 145 show port isolation interface ooococonnccccccccnnccccncononcccconcnnononnnnnoncnncnnoconnnnnnnnnn nono cinnnnnnncnnnnno 145 Chapter 25 L
127. igure host type Gigabit Ethernet port 3 as a member of primary VLAN 3 and 39 secondary VLAN 4 TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if switchport private vlan host association 3 4 switchport private vlan mapping Description The switchport private vlan mapping command is used to add promiscuous type port to private VLAN To remove the port from Private VLAN please use no switchport private vlan mapping command Syntax switchport private vlan mapping primary_vian_id secondary_vlan_id no switchport private vlan mapping primary_vlan_id secondary_vlan_id Parameter primary vlan id Primary VLAN ID ranging from 2 to 4094 secondary vlan id Secondary VLAN ID ranging from 2 to 4094 Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure promiscuous type Gigabit Ethernet port 3 as a member of primary VLAN 3 and secondary VLAN 4 TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if switchport private vlan mapping 3 4 show vlan private vlan Description The show vlan private vlan command is used to display the Private VLAN configuration information of the switch Syntax show vlan private vlan 40 Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration information of all Private VLAN TL SG5428 config show vlan private vlan 41
128. information TL SG5428 show cluster member show cluster manage role Description The show cluster manage role command is used to display the cluster role of the current switch Syntax show cluster manage role Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the role of the current switch TL SG5428 config show cluster manage role 226
129. ion The loopback detection recovery time command is used to configure the time after which the blocked port would automatically recover to normal status Syntax loopback detection recovery time recovery time Parameter recovery time The time after which the blocked port would automatically recover to normal status and the loopback detection would restart It is integral times of detection interval ranging from 3 to 100 and the default value is 3 Command Mode Global Configuration Mode Example Configure the recovery time as 3 times of detection interval TL SG5428 config loopback detection recovery time 3 loopback detection interface Description The loopback detection command is used to enable the loopback detection function of the specified port To disable it please use no loopback detection command Syntax loopback detection no loopback detection Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the loopback detection function of ports 1 3 148 TL SG5428 config interface range gigabitEthernet 1 0 1 3 TL SG5428 Config if range loopback detection loopback detection config Description The loopback detection config command is used to configure the process mode and recovery mode for the ports by which the switch copes with the detected loops Syntax loopback detection config process mode alert port based H reco
130. ion Mode Example Display the port state and of Protocol based VLAN interface TL SG5428 config show protocol vlan interface 27 Chapter5 VLAN VPN Commands VLAN VPN Virtual Private Network function the implement of a simple and flexible Layer 2 VPN technology allows the packets with VLAN tags of private networks to be encapsulated with VLAN tags of public networks at the network access terminal of the Internet Service Provider And these packets will be transmitted with double tag across the public networks dot1q tunnel Description The dot1q tunnel command is used to enable the VLAN VPN function globally To disable the VLAN VPN function please use the no dot1q tunnel command Syntax dot1q tunnel no dot1q tunnel Command Mode Global Configuration Mode Example Enable the VLAN VPN function globally TL SG5428 config dot1q tunnel dot1q tunnel tpid Description The dot1q tunnel tpid command is used to configure Global TPID of the VLAN VPN To restore to the default value please use the no dot1q tunnel tpid command Syntax dot1q tunnel tpid num no dot1q tunnel tpid Parameter num The value of Global TPID It must be 4 Hex integers By default it is 28 8100 Command Mode Global Configuration Mode Example Configure Global TPID of the VLAN VPN as 0x9100 TL SG5428 config dot1q tunnel tpid 9100 switchport dot1q tunnel enable Description The switchport dot1q tunnel
131. is used to display the configuration of the Alarm Management entry Syntax show rmon alarm index Parameter index The index number of the entry selected to display the configuration ranging from 1 to 12 in the format of 1 3 5 You can select more than one entry for each command By default the configuration of all Alarm Management entries is displayed Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration of the Alarm Management entry 1 2 TL SG5428 show rmon alarm 1 2 210 Chapter 30 LLDP Commands LLDP function enables network devices to advertise their own device information periodically to neighbors on the same LAN The information of the LLDP devices in the LAN can be stored by its neighbor in a standard MIB so it is possible for the information to be accessed by a Network Management System NMS such as SNMP Ildp Description The lldp command is used to enable LLDP function To disable the LLDP function please use no Ildp command Syntax lldp no lidp Command Mode Global Configuration Mode Example Enable LLDP function globally TL SG5428 config Ildp Ildp hold multiplier Description The Ildp hold multiplier command is used to configure the Hold Multiplier parameter The aging time of the local information in the neighbor device is determined by the actual TTL value used in the sending LLDPDU TTL Hold Multiplier Transmit Interval
132. ivity of the gateways during its journey from the source to destination of the test data Syntax tracert p_addr maxHops Parameter ip_addr The IP address of the destination device 119 maxHops The maximum number of the route hops the test data can pass though It ranges from 1 to 30 By default this value is 4 Command Mode User EXEC Mode and Privileged EXEC Mode Example Test the connectivity between the switch and the network device with the IP 192 168 0 131 If the destination device has not been found after 20 maxHops the connection between the switch and the destination device is failed to establish TL SG5428 tracert 192 168 0 131 20 loopback interface Description The loopback interface command is used to test whether the port is available or not Syntax loopback interface gigabitEthernet port internal external Parameter port The number of Ethernet port which is selected for loopback test internal external Loopback Type There are two options Internal and External Command Mode User EXEC Mode and Privileged EXEC Mode Example Do an Internal type loopback test for port 1 TL SG5428 loopback interface gigabitEthernet 1 0 1 internal Do an External type loopback test for port 1 TL SG5428 loopback interface gigabitEthernet 1 0 1 external show system time Description 120 The show system time command is used to display the current time system
133. kets It is the default value source mac The source MAC address contained in the rule source mac mask The source MAC address mask It is required if you typed the source MAC address destination mac The destination MAC address contained in the rule destination mac mask The destination MAC address mask It is required if you typed the destination MAC address vlan id The VLAN ID contained in the rule ranging from 1 to 4094 ethernet type EtherType contained in the rule in the format of 4 hex number 158 user pri The user priority contained in the rule ranging from O to 7 By default it is not limited time segment The time range for the rule to take effect By default it is not limited Command Mode Mac Access list Configuration Mode Example Create a MAC ACL whose ID is 20 and add Rule 10 for it In the rule the source MAC address is 00 01 3F 48 16 23 the source MAC address mask is 11 11 11 11 11 00 VLAN ID is 2 the user priority is 5 the time range for the rule to take effect is tRange1 and the packets match this rule will be forwarded by the switch TL SG5428 config mac access list 20 TL SG5428 config mac acl rule 10 permit smac 00 01 3F 48 16 23 smask 11 11 11 11 11 00 vid 2 pri 5 tseg tRange1 access list policy name Description Syntax The access list policy name command is used to add Policy To delete the corresponding Polic
134. le authentication protocol EAP to exchange information between the switch and the client The EAP protocol packets with authentication data can be encapsulated in the advanced protocol such as RADIUS packets to be transmitted to the authentication server Command Mode Global Configuration Mode Example Configure the Authentication Method of IEEE 802 1X as pap TL SG5428 config dot1x auth method pap dot1x guest vlan global Description The dot1x guest vlan command is used to enable the Guest VLAN function globally To disable the Guest VLAN function please use no dot1x guest vlan command Syntax dot1x guest vlan vid no dot1x guest vlan Parameter vid The VLAN ID needed to enable the Guest VLAN function ranging from 2 to 4094 The supplicants in the Guest VLAN can access the specified network source Command Mode Global Configuration Mode Example Enable the Guest VLAN function for VLAN 5 TL SG5428 config dot1x guest vlan 5 79 dot1x quiet period Description The dot1x quiet period command is used to enable the quiet period function To disable the function please use no dot1x quiet period command Syntax dot1x quiet period no dot1x quiet period Command Mode Global Configuration Mode Example Enable the quiet period function TL SG5428 config dot1x quiet period dot1x timeout Description The dot1x timeout command is used to configure the quiet period and the supplicant timeout T
135. le connected to the switch locate and diagnose the trouble spot of the network Syntax show cable diagnostics interface gigabitEthernet port Parameter port The number of the port which is selected for Cable test Command Mode Privileged EXEC Mode and Any Configuration Mode Example Show the cable diagnostics of port 3 TL SG5428 show cable diagnostics interface gigabitEthernet 1 0 3 122 Chapter 21 Ethernet Configuration Commande Ethernet Configuration Commands can be used to configure the Bandwidth Control Negotiation Mode and Storm Control for Ethernet ports interface gigabitEthernet Description The interface gigabitEthernet command is used to enter the Interface gigabitEthernet Configuration Mode and configure the corresponding Gigabit Ethernet port Syntax interface gigabitEthernet port Parameter port The Ethernet port number Command Mode Global Configuration Mode Example To enter the Interface gigabitEthernet Configuration Mode and configure port 2 TL SG5428 config interface gigabitEthernet 1 0 2 interface range gigabitEthernet Description The interface range gigabitEthernet command is used to enter the interface range gigabitEthernet Configuration Mode and configure multiple Gigabit Ethernet ports at the same time Syntax interface range gigabitEthernet port list Parameter port list The list of Ethernet ports Command Mode Global Configuration Mode 123 Us
136. limit please use no user access control command Syntax user access control port based interface gigabitEthernet port range gigabitEthernet port list no user access control Parameter port The Ethernet port number port list The list group of Ethernet ports in the format of 1 0 1 4 You can appoint 5 ports at most Command Mode Global Configuration Mode Example Configure that only the users connected to ports 2 6 are allowed to login TL SG5428 config user access control port based interface range gigabitEthernet 1 0 2 6 53 user max number Description The user max number command is used to configure the maximum login user numbers at the same time To cancel the limit on login numbers please use no user max number command Syntax user max number admin num guest num no user max number Parameter admin num The maximum number of the users allowed to log on as Admin ranging from 1 to 16 The total number of Admin and Guest should be less than 16 guest num The maximum number of the users allowed to log on as Guest ranging from O to 15 The total number of Admin and Guest should be less than 16 Command Mode Global Configuration Mode Example Configure the maximum number of users login as Admin and Guest as 5 and 3 TL SG5428 config user max num 5 3 user idle timeout Description The user idle timeout command is used to configure the timeout time of the switch To r
137. mp snooping drop unknown Description The ip igmp snooping drop unknown command is used to process the unknown multicast as discard To disable the operation of processing the unknown multicast as discard please use no ip igmp snooping drop unknown command Syntax ip igmp snooping drop unknown no ip igmp snooping drop unknown Command Mode Global Configuration Mode Example Specify the operation to process unknown multicast as discard TL SG5428 config ip igmp snooping drop unknown 183 ip i gmp snooping vian config Description The ip igmp snooping vlan config command is used to enable VLAN IGMP Snooping function or to modify IGMP Snooping parameters and to create static multicast IP entry To disable the VLAN IGMP Snooping function please use no ip igmp snooping vlan config command ip igmp snooping vlan config vlan id list rtime router time mtime member time Itime leave time rport interface gigabitEthernet port ip igmp snooping vlan config vian id static ip interface gigabitEthernet port no ip igmp snooping vlan config vian id list no ip igmp snooping vlan config vian id static ip Parameter vlan id list The ID list of the VLAN desired to modify configuration ranging from 2 to 4094 in the format of 1 3 5 router time Router Port Time Within this time if the switch does not receive IGMP query message from the router port it will consider this port is not a router port any more Router
138. n Chapter 23 Port Mirror Commands Provide information about the commands used for configuring the Port Mirror function Chapter 24 Port Isolation Commands Provide information about the commands used for configuring Port Isolation function Chapter 25 Loopback Detection Commands Provide information about the commands used for configuring the Loopback Detection function Chapter 26 ACL Commands Provide information about the commands used for configuring the ACL Access Control List Chapter 27 MSTP Commands Provide information about the commands used for configuring the MSTP Multiple Spanning Tree Protocol Chapter 28 IGMP Commands Provide information about the commands used for configuring the IGMP Snooping Internet Group Management Protocol Snooping Chapter 29 SNMP Commands Provide information about the commands used for configuring the SNMP Simple Network Management Protocol functions Chapter 30 LLDP Commands Provide information about the commands used for configuring LLDP function Chapter 31 Cluster Commands Provide information about the commands used for configuring the Cluster Management function Chapter 1 Using the CLI 1 1 Accessing the CLI You can log on to the switch and access the CLI by the following two methods 1 Log on to the switch by the console port on the switch 2 Log on to the switch remotely by a Telnet or SSH connection through an Ethernet port 1 1 1 Logon by a console port
139. n configure one or several ports different ports corresponds to different commands a e Interface gigabitEthernet Configure parameters for an Ethernet port such as Duplex mode flow control status Interface range gigabitEthernet The commands contained are the same as that of the Interface Ethernet Configure parameters for several Ethernet ports Interface link aggregation Configure parameters for a link aggregation such as broadcast storm Interface range link aggregation Configure parameters for multi trunks Interface vlan Configure parameters for the vlan port e Vlan Configuration Mode In this mode users can create a VLAN and add a specified port to the VLAN 3 Some commands are global that means they can be performed in all modes e show Displays all information of switch for example statistic information port information VLAN information e history Displays the commands history 12 1 3 Security Levels This switch s security is divided into two levels User level and Admin level User level only allows users to do some simple operations in User EXEC Mode Admin level allows you to monitor configure and manage the switch in Privileged EXEC Mode Global Configuration Mode Interface Configuration Mode and VLAN Configuration Mode Users get the privilege to the User level once connecting console port with the switch or logging in by Telnet However Guest users are restricted t
140. n of 801 X for all ports TL SG5428 config show dot1x interface Display the configuration information of 801 X for port 1 TL SG5428 config show dot1x interface gigabitEthernet 1 0 1 show radius accounting Description The show radius accounting command is used to display the configuration of the accounting server Syntax show radius accounting 86 Command Mode Privileged EXEC Mode and Any Configuration Modes Example Display the configuration of the accounting server TL SG5428 config show radius accounting show radius authentication Description The show radius authentication command is used to display the configuration of the RADIUS authentication server Syntax show radius authentication Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration of the RADIUS authentication server TL SG5428 config show radius authentication 87 Chapter 16 System Log Commande The log information will record the settings and operation of the switch respectively for you to monitor operation status and diagnose malfunction logging buffer Description The logging buffer command is used to configure the severity level and the status of the configuration input to the log buffer To disable the logging buffer function please use no logging buffer command Local Log is the log information saved in the switch It has two output channels that is it can be saved to two differ
141. nd ien Le A A A A ee 162 accessilist DING VIAN leidas 162 SNOW TIME TANGO ai AA A AAA tad andes 163 SHOW holiday di A ren A 163 OO WAS SEL A A E Ea 163 show access list POliCy iii id A deer 164 SEI let DIM a A E ET 164 Chapter 27 MSTP CommandS AA AD 166 Spanningd Treeidlobal aa eaa e ae aa adaa Oyaa Ea a EAA e E e NENEA Eai 166 spanning tree interface ccccecccceeceeeeeeeeneeceeeeeeeeeeeeeeaeeeeeeeeeeeeeeaaaeeseeeeeseseeceieeseeeeeeesseeas 166 spanning tree COMMON CON IO ceeeeeccceeeeeeeeeeeeneeeeeeceeeeeccceaeaeeeeeeeeeseceaeaeeseeeeeseeesnsineeees 167 SPINNING TES MO iii AAA AAA A AAA AAA AA 168 spanning tree mst configuration cooooinonococcccnccccnnnnoncnnnnnncncnnnnnnnnnnnnnnonnnnannnnnnnnnnennanannnnnninn 168 UNE le iatorlitot cele lies 169 AE AN E EAEN teats date Sh O ce candace E A AE A O E E A A E veg 170 POVISION Eeer o ln De e dee Dah ae Sete rd 170 spanning tree mst INStANCE 00 0 ee eee eee eee ee eee 171 AO ttt kttt ttt ttnt 11 ttr AtEEEAEENEEENEEENEEEEEEEEEEEEEEEE EEN EEEEEEEEEEEEEEEEEEEEEEE 171 Spanhing tree Praia rie 172 spanning tree t defend i nin a a a 173 Spanning tree EE 173 Spanning tree ele De in EE 174 Spanning tree MAX NONS 0 eee eee eee eee eee eee 175 spanning tree Dpdufilter eee ceecccceceeeceeceneaeeeceeeeeeeceneaeeeeeeeeeeeceeeaaeeeeeeeesesenceneeeeeeeeeeteeeeieas 175 Spanning tree DpduUguard EE 176 Spanning tree guard Joen 176 spanning tree gu
142. nding command is used to bind the IP address MAC address VLAN ID and the Port number together manually You can manually bind the IP address MAC address VLAN ID and the Port number together in the condition that you have got the related information of the Hosts in the LAN To delete the IP MAC VID PORT entry from the binding table please use no ip source binding index command Syntax ip source binding hostname ip addr mac addr vlan vid interface gigabitEthernet port none arp detection ip verify source both forced source arp scanning dhcp snooping no ip source binding index idx Parameter hostname The Host Name which contains 20 characters at most ip addr The IP Address of the Host mac addr The MAC Address of the Host vid The VLAN ID needed to be bound ranging from 1 to 4094 port The number of Ethernet port connected to the Host none arp detection ip verify source both The protect type for the entry arp detection indicates ARP detection ip verify source indicates IP source fliter none indicates applying none both indicates applying both forced source The source of the binding entry can be specified as arp scanning or dhcp snooping It is multi optional idx The entry number needed to be deleted ranging from 1 to 200 You can use the show ip source binding command to get the idx Pay attention to that the entry number is t
143. ng global global rate global rate dec threshold dec threshold dec rate dec rate no ip dhcp snooping global Parameter global rate The value to specify the maximum amount of DHCP messages that can be forwarded by the switch per second The excessive messages will be discarded The options are 0 10 20 30 40 50 packet second By default it is O standing for disable dec threshold The value to specify the minimum transmission rate of the Decline packets to trigger the Decline protection for the specific port The options are 0 5 10 15 20 25 30 packet second By default it is 0 standing for disable dec rate The value to specify the Decline Flow Control The traffic flow of the corresponding port will be limited to be this value if the transmission rate of the Decline packets exceeds the Decline Threshold The options are 5 10 15 20 25 30 packet second By default it is 5 Command Mode Global Configuration Mode Example Configure the Global Flow Control as 30pps the Decline Threshold as 20 pps and decline Flow Control as 20 pps for DHCP Snooping TL SG5428 config ip dhcp snooping global global rate 30 dec threshold 20 dec rate 20 61 ip dhcp snooping information option Description The ip dhcp snooping information option command is used to enable the Option 82 function of DHCP Snooping To disable the Option 82 function please use no ip dhcp snooping information option command Syntax ip
144. ng multi vlan config command is used to create Multicast VLAN To delete the corresponding Multicast VLAN please use no ip igmp snooping multi vlan config command Syntax ip igmp snooping multi vlan config vian id rtime router time mtime member time Itime leave time rport interface gigabitEthernet port no ip igmp snooping multi vlan config Parameter vid The ID of the VLAN desired to modify configuration ranging from 2 to 4094 router time Router Port Time Within this time if the switch does not receive IGMP query message from the router port it will consider this port is not a router port any more Router Port Time ranges from 60 to 600 in seconds By default it is 300 member time Member Port Time Within this time if the switch does not receive IGMP report message from the member port it will consider this port is not a member port any more Member Port Time ranges from 60 to 600 in seconds By default it is 260 185 leave time Leave Time which is the interval between the switch receiving a leave message from a host and the switch removing the host from the multicast groups Leave Time ranges from 1 to 30 in seconds By default it is 1 port The Ethernet port number Command Mode Global Configuration Mode Example Enable Multicast VLAN 3 and configure Router Port Time as 100 seconds Member Port Time 100 seconds Leave Time 3 seconds and Static Router Port port 3
145. ng tree in a switched network connecting all devices in the network Syntax spanning tree common config port priority pri ext cost ext cost int cost int cost portfast enable disable point to point auto open close no spanning tree common config Parameter pri Port Priority which must be multiple of 16 ranging from 0 to 240 By default the port priority is 128 Port Priority is an important criterion on determining if the port connected to this port will be chosen as the root port In the same condition the port with the highest priority will be chosen as the root port The lower value has the higher priority ext cost External Path Cost which is used to choose the path and calculate the path costs of ports in different MST regions It is an important criterion on determining the root port The lower value has the higher priority It ranges from o to 2000000 By default it is O which is mean auto int cost Internal Path Cost which is used to choose the path and calculate the path costs of ports in an MST region It is an important criterion on determining the root port The lower value has the higher priority By default it is automatic It ranges from o to 2000000 By default it is O which is mean auto portfast Enable Disable Edge Port By default it is disabled The edge port can transit its state from blocking to forwarding rapidly without waiting for forward delay
146. nnccccoccccccccconcononncnnoncnnoncnnnnncncnnnnnoncnnnnnnnnnncnneninnnnnnncnnnno 109 system time St date sensei suites A Wee Me tg 109 system time det recurring 0 0 00 eee eee eee 110 WEE 111 OCN edad tallada dba 112 ellen A A A AA nt ein Oe AA 112 p management VAM EE 113 A OO 113 ip address alloc ONCP AA 114 ipaddress allot DOOR EES dete eens dE e 114 IC EE 115 FODOOU O 115 copy running config Startup CONTIY ooooocococcccnccccconcononcnnononnnncnnnnnnnnnnnnnoncnnn nono nnncnnanannnnnncnnnno 116 Copy Startup Config mp 116 CODY tftp StartuP CONMIG icmoiciicinicac rr seda 117 lee Ile E 117 elle WEE 119 Maceta lara tdt 119 loopback Interface tii a Ad a a Ai db dad 120 Ne VE E ln A A A A A A age 120 Show System time dSty aii ide 121 show system tiMe Mtp sits wt heehee tee et ae eit 121 SHOWS YSTO MITO EE 122 show cable diagnostics interface ooonononocicicncncccnonconcnncnnncccnnnnnnnnnnnnnnonnnnnnnn nono nnncnnanannnnnninno 122 Chapter 21 Ethernet Configuration Commands cceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 123 interface ogabittthermet ccc ceecceecccceceeeeeeceeeceeeeeeeeeeeseseeaeaeeeeeeeeseseeqcaeeseeeseeeseeeensaneees 123 interface range gigabitEthernet ooonoonococococccccccconcononcnncnnononnnnnonnnnnononnnnannnnnnnnnnnnnnnnnnnnnnnncnnnno 123 CeSCrpllON ii AAA AAA Wa aie 124 GU ee OH 124 lge DEE 125 e EE e 125 AU e Ova eh dete 126 SPCCO i esi eon A a Ae en A oe ie 126 storm controlbroad CAS di
147. nnel Group 1 TL SG5428 config show etherchannel 1 detail show etherchannel load balance Description The show etherchannel load balance command is used to display the Aggregate Arithmetic of LAG Syntax show etherchannel load balance Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the Aggregate Arithmetic of LAG TL SG5428 config show etherchannel load balance show lacp Description The show lacp command is used to display the LACP information for a specified EtherChannel Group Syntax show lacp channel group num internal neighbor 49 Parameter channel group num The EtherChannel Group number ranging from 1 to 14 By default it is empty and will display the information of all LACP groups internal The internal LACP information neighbor The neighbor LACP information Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the internal LACP information of EtherChannel Group 1 TL SG5428 config show lacp 1 internal show lacp sys id Description The show lacp sys id command is used to display the LACP system priority globally Syntax show lacp sys id Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the LACP system priority TL SG5428 config show lacp sys id 50 Chapter 10 User Manage Commands User Manage Commands are used to manage the user s logging information by We
148. nooping trust command Syntax ip dhcp snooping trust no ip dhcp snooping trust Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure port 2 to be a Trusted Port TL SG5428 config interface gigabitEthernet 1 0 2 TL SG5428 config if ip dhcp snooping trust 64 ip dhcp snooping mac verify Description The ip dhcp snooping mac verify command is used to enable the MAC Verify feature To disable the MAC Verify feature please use no ip dhcp snooping mac verify command There are two fields of the DHCP packet containing the MAC address of the Host The MAC Verify feature is to compare the two fields and discard the packet if the two fields are different Syntax ip dhcp snooping mac verify no ip dhcp snooping mac verify Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the MAC Verify feature for port 2 TL SG5428 config interface gigabitEthernet 1 0 2 TL SG5428 config if ip dhcp snooping mac verify ip dhcp snooping limit rate Description The ip dhcp snooping limit rate command is used to enable the Flow Control feature for the DHCP packets The excessive DHCP packets will be discarded To restore to the default configuration please use no ip dhcp snooping limit rate command Syntax ip dhcp snooping limit rate va ue no ip dhcp snooping limit rate Parameter value Th
149. nterface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure the Control Type for port 1 as port based TL SG5428 config interface gigabitEthernet 1 0 1 TL SG5428 config if dot1x port method port based radius Description The radius command is used to configure the parameters of radius Syntax radius auth pri ip auth sec ip auth port port auth key keyvalue acct pri ip acct sec ip acct port port acct key keyvalue timeout value no radius auth port auth key acct port acct key timeout Parameter auth pri jo The IP address of the authentication server auth sec ip The IP address of the alternative authentication server auth port port The UDP port of authentication server s ranging from 1 to 65535 The default port is 1812 auth key keyvalue The shared password for the switch and the authentication servers to exchange messages which contains 15 characters at most acct pri jo The IP address of the accounting server acct sec ip The IP address of the alternative accounting server acct port port The UDP port of accounting server s ranging from 1 to 65535 The default port is 1813 acct key keyvalue The shared password for the switch and the accounting servers to exchange messages which contains 15 characters at most 84 value The maximum time for the switch to wai
150. o access the CLI Users can enter Privileged EXEC mode from User EXEC mode by using the enable command In default case no password is needed In Global Configuration Mode you can configure password for Admin level by enable password command Once password is configured you are required to enter H to access Privileged EXEC mode 1 4 Conventions 1 4 1 Format Conventions The following conventions are used in this Guide gt Items in square brackets are optional gt Items in braces are required gt Alternative items are grouped in braces and separated by vertical bars For example speed 10 100 1000 gt Bold indicates an unalterable keyword For example show logging gt Normal Font indicates a constant several options are enumerated and only one can be selected For example switchport type access trunk general gt Italic Font indicates a variable an actual value must be assigned For example bridge aging time aging time 1 4 2 Special Characters You should pay attentions to the description below if the variable is a character string gt These six characters lt gt 18 can not be input gt Ifa blank is contained in a character string single or double quotation marks should be used for example hello world hello world and the words in the quotation marks will be identified as a string Otherwise the words will be identified as several strings 13 1 43 Parameter Forma
151. o delete the corresponding holiday please use no holiday command Syntax holiday name start date sfart date end date end date no holiday Parameter name The holiday name ranging from 1 to 16 characters start date The start date of the holiday in the format of MM DD for instance 05 01 end date The end date of the holiday in the format of MM DD for instance 05 03 Command Mode Global Configuration Mode 154 Example Define National Day configuring the start date as October 1st and the end date as October 3rd TL SG5428 config holiday nationalday start date 10 01 end date 10 03 access list create Description The access list create command is used to create standard IP ACL and extend IP ACL Syntax access list create access list num Parameter access list num ACL ID ranging from 100 to 299 The ID range of Standard IP ACL ranges is 100 199 and the Extend IP ACL is 200 299 Command Mode Global Configuration Mode Example Create a standard IP ACL whose ID is 123 TL SG5428 config access list create 123 mac access list Description The mac access list command is used to create MAC ACL To set the detailed configurations for a specified MAC ACL please use mac access list command to access Mac Access list Configuration Mode To delete the MAC ACL please use no mac access list Syntax mac access list access list num no mac access list access list num Parameter
152. o restore to the default please use no dot1x timeout command Syntax dot1x timeout quiet period time reauth period time no dot1x timeout quiet period reauth period Parameter quiet period time The value for Quiet Period ranging from 1 to 999 in seconds By default it is 10 Once the supplicant failed to the 802 1X Authentication then the switch will not respond to the authentication request from the same supplicant during the Quiet Period reauth period time The maximum time for the switch to wait for the response from supplicant before resending a request to the supplicant ranging from 1 to 9 in second By default it is 3 Command Mode Global Configuration Mode 80 Example Configure the quiet period as 100 seconds TL SG5428 config dot1x timeout quiet period 100 dot1x max reauth req Description The dot1x max reauth req command is used to configure the maximum transfer times of the repeated authentication request when the server cannot be connected To restore to the default value please use no dot1x max reauth req command Syntax dot1x max reauth req times no dot1x max reauth req Parameter times The maximum transfer times of the repeated authentication request ranging from 1 to 9 in times By default the value is 3 Command Mode Global Configuration Mode Example Configure the maximum transfer times of the repeated authentication request as 5 TL SG5428 config d
153. of the connections to the SSH server It ranges from 1 to 5 By default this value is 5 94 Command Mode Global Configuration Mode Example Specify the maximum number of the connections to the SSH server as 3 TL SG5428 config ip ssh max client 3 ip ssh download Description The ip ssh download command is used to download the SSH key file from TFTP server Syntax ip ssh download v1 v2 key file ip address p addr Parameter v1 v2 Select the type of SSH key to download vi represents SSH 1 v2 represents SSH 2 key file The name of the key file which is selected to download The length of the name ranges from 1 to 25 characters The key length of the downloaded file must be in the range of 256 to 3072 bits ip addr The IP address of the TFTP server Command Mode Global Configuration Mode Example Download a SSH 1 type key file named ssh key from TFTP server with the IP Address 192 168 0 148 TL SG5428 config ip ssh download v1 ssh key ip address 192 168 0 148 show ip ssh Description The show ip ssh command is used to display the global configuration of SSH Syntax show ip ssh Command Mode Privileged EXEC Mode and Any Configuration Mode 95 Example Display the global configuration of SSH TL SG5428 config show ip ssh 96 Chapter 18 SSL Commande SSL Secure Sockets Layer a security protocol is to provide a secure connection for the application layer protocol e
154. oice VLAN function please use no voice vlan command Syntax voice vlan vian id no voice vlan Parameter vlan id Specify IEEE 802 1Q VLAN ID ranging from 2 to 4094 Command Mode Global Configuration Mode Example Enable the Voice VLAN function for VLAN 10 TL SG5428 config voice vlan 10 voice vlan aging time Description The voice vlan aging time command is used to set the aging time for a voice VLAN To restore to the default aging time for the Voice VLAN please use no voice vlan aging time command By default the aging time is 1440 minutes Syntax voice vlan aging time time no voice vlan aging time 32 Parameter time Aging time in minutes to be set for the Voice VLAN It ranges from 1 to 43200 Command Mode Global Configuration Mode Example Set the aging time for the Voice VLAN as 1 minute TL SG5428 config voice vlan aging time 1 voice vlan mac address Description The voice vlan mac address command is used to create Voice VLAN OUI To delete the specified Voice VLAN OUI please use no voice vlan mac address command Syntax voice vlan mac address mac addr mask mask description descript no voice vlan mac address mac addr Parameter mac addr The OUI address of the voice device in the format of XX XX XX XX XX XX mask The OUI address mask of the voice device in the format of XX XX XX XX XX XX descript Give a description to the OUI for identification
155. ommand is used to configure the bandwidth limit for an Ethernet port To disable the bandwidth limit please use no bandwidth command Syntax bandwidth ingress ingress rate egress egress rate 129 no bandwidth all ingress egress Parameter ingress rate Specify the bandwidth for receiving packets Range 1 1024000 for the gigaport egress rate Specify the bandwidth for sending packets Range 1 1024000 for the gigaport Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure the ingress rate as 5120Kbps and egress rate as 1024Kbps for port 5 TL SG5428 config interface gigabitEthernet 1 0 5 TL SG5428 config if bandwidth ingress 5120 egress 1024 clear counters Description The clear counters command is used to clear the statistic information of all the Ethernet ports Syntax clear counters Command Mode Global Configuration Mode Example Clear the statistic information of all ports TL SG5428 config clear counters show interface status Description The show interface status command is used to display the connective status of an Ethernet port Syntax show interface gigabitEthernet port status 130 Parameter port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the connective status of all ports TL SG5428 config show inter
156. on is disabled Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable Port Security function for port 1 select Static mode as the learn mode and specify the maximum number of MAC addresses that can be learned on this port as 30 TL SG5428 config interface gigabitEthernet 1 0 1 TL SG5428 config if mac address table max mac count max number 30 mode static status enable show mac address table address Description The show mac address table address command is used to display the information of all Address entries Syntax show mac address table address dynamic static drop all Parameter dynamic static drop all The type of your desired entry Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the information of all Address entries TL SG5428 config show mac address table address all show mac address table aging time Description The show mac address table aging time command is used to display the Aging Time of the MAC address Syntax show mac address table aging time 103 Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the Aging Time of the MAC address TL SG5428 config show mac address table aging time show mac address table max mac count interface gigabitEthernet Description The show mac address table max mac count interface gigabitEthernet command
157. onfig cluster commander tp cluster manage Description The cluster manage command is used to configure the hold time and interval to send handshake packets of the cluster To return to the default configuration please use no cluster manage command Syntax cluster manage holdtime hold time timer interval time no cluster manage holdtime timer Parameter hold time Hold Time which is the time for the switch to keep the cluster information Hold Time ranges from 1 to 255 in seconds It is 20 by default interval time Interval Time which is the interval to send handshake packets Interval Time ranges from 1 to 255 in seconds It is 20 by default Command Mode Global Configuration Mode Example Specify the Hold Time and Interval Time of the cluster as 50 seconds TL SG5428 config cluster manage holdtime 50 TL SG5428 config cluster manage timer 50 cluster member 222 Description The cluster member command is used to add member switch To delete the corresponding member please use no cluster member command The add delete operations of member switches should be implemented by the commander switch according to the MAC address Syntax cluster member mac address mac address no cluster member mac address mac address Parameter mac address The MAC address of the member switch desired to join in or to be deleted from the cluster Command Mode Global Configuration Mode Example
158. oopback Detection Commande cccccccoonnnnncnnnncconcncnonannnononnnnnnnnnnnnos 147 loopback detection global ccccceecccceceeeeeeeceneaeeeeeeeeeeeceneaaeeeeeeeeeeseeceaeaeeeeeeeeseeeseseneeeeees 147 loopback detection mterval reee eeeeeeerteserssrrssersertssrtseresertssetsertssetssetssensee nnne 147 loopback detection reCcovVery tiIMe oooooccccccnncnnncnnncnnnnonnnnnnnnnnnnnnnnnnnnnnnnnncnnnnnnnnnnnennnrnnnnnnnnnnn 148 VIII loopback detection interface o ooooooocccncocicococooococonccconcnnnnnoncnnononnnnnnnnnnnnnoncnnnnnnnnnnnnnnnnninnnnss 148 loopback detection config cece eeeeeeeceneaeeeeeeeeseseeeceeeaeeeeeeeeseeneieaeeeeeeeetees 149 loopback detection recover ccc errr etter eee ee tert teeter eeeeeeeeeeeeeteeeeeeegs 149 show loopback detection global cece i i ri i rr ie naco nn cnn a cr nn rr nn cr rn rr nnnrnn cn 150 show loopback detection Interface 150 Chapter 20 AGE COmiunians eieren ee ee eee ee eiet 152 lu CL Le EE 152 AOS MU A ete eae tease 152 A weds cated catiee dete tee ince Vaan sauten dete E A 153 PION EE 154 holiday te e e INTE 154 ACCOSS ASEO E 155 ue e E EE 155 e A lds een cca eect slay dee nde aeeml i aa dedi ben cantons adap E AAAA E AACN 156 access listed varies edness ae riders 157 TUNG ee ef Ree Sein Ba uae dads Eed Made ere 158 ACCESS IISt DOEN HIE FOI a ae een a Stee 159 lee Ee eelere HE 160 redirect Interface 160 ee le ue da 161 SA OA 161 access list bi
159. ort 2 TL SG5428 show port isolation interface gigabitEthernet 1 0 2 Display the forward list of all Ethernet ports TL SG5428 show port isolation interface 146 Chapter 25 Loopback Detection Commands With loopback detection feature enabled the switch can detect loops using loopback detection packets When a loop is detected the switch will display an alert or further block the corresponding port according to the configuration loopback detection global Description The loopback detection command is used to enable the loopback detection function globally To disable it please use no loopback detection command Syntax loopback detection no loopback detection Command Mode Global Configuration Mode Example Enable the loopback detection function globally TL SG5428 config loopback detection loopback detection interval Description The loopback detection interval command is used to define the interval of sending loopback detection packets from switch ports to network aiming at detecting network loops periodically Syntax loopback detection interval interval time Parameter interval time The interval of sending loopback detection packets It ranges from 1 to 1000 seconds By default this value is 30 Command Mode Global Configuration Mode 147 Example Specify the interval time as 50 seconds TL SG5428 config loopback detection interval 50 loopback detection recovery time Descript
160. ort voice vlan security ooooooocccoccoocconcconnconcconnonnnonnnonononononononnnonnnonnnonnnonnnonnnnnncnnncnnncnnss 34 SNOW VOICE MAN A A A daa 35 SHOW VOICE Vlan OU arcada a ai a ati 35 Show voice vlan switchport cece eeeeeeeeeee eee eeeeeeeeeeaeeeaeeeaeeeae seas EEEE EEEE EEEE seas eaaeaaeeeaaeaaeeeaaeaaes 35 Chapter 7 Private VLAN Commande 37 private Vian primaar e ee ti 37 private vlan SECONCALY EEN 37 private vlan association 38 SWitchport Drivate vlan AANEREN ENEE 38 switchport private vlan bost association 39 switchport private vlan Mapping eee aces eens aeeeaeeeaeeeaeeeaeeeaeeaaeeaaeeaaeeaaeeaaeeaaeeaaeeaes 40 show vlan private vlan 0 0 ceeeeeeeeeee cece eee eeeeeaee sees aaeeaaeeaaeeaaee seas eae eaaeeaaeaaae seas eaeeeaeeaaaeeaaeaaaeaaes 40 Chapter8 GVRP Commande cooocccnnnncccnonononnncncnnnncnnnonnnnnnnncnnnnnnnnnnnnnnnnnnnnnnncnnnnnnnnns 42 ed tele 42 OVID INtertaCe aii teleco 42 IN nn nnn nn nnn nn En nn II En EI nnn nnn nnn Eni nin iii eiiietneenereiinae 43 eise Blue 43 SHOW grp global vciorionini ad dad 44 ee Vue Bil Ee 45 Chapter 9 Etherchannel Commande AAA 46 CHANNSIGrOUP E 46 port channel load balance oooocooocccccnncccnncnnnnnnnnnnnnnnnonnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnneninen 47 JACD SYSTSM PMOMILY NO 47 lee Heiela Gelle eler 48 show etherchannel c ccceeceeeeceeeeee cee eeeeeeee aes sees eaeeaaee sees sees EEEE sees sees sae eaaeaeaeeaeeaeeeaaeaaaeaa
161. os map command is used to configure the mapping relation between IEEE 802 1P priority tag IEEE 802 1Q tag CoS value and the TC egress queue To return to the default configuration please use no qos queue cos map command When 802 1P Priority is enabled the packets with 802 1Q tag are mapped to different priority levels based on 802 1P priority mode The untagged packets are mapped based on port priority mode Syntax qos queue cos map tag cos id tc id no qos queue cos map Parameter tag cos id The 8 priority levels defined by IEEE 802 1P or the priority level the packets with tag are mapped to which ranges from CoS 0 to CoS 7 tc id The egress queue the packets with tag are mapped to It ranges from 0 to 3 which represents TCO TC1 TC2 and TC3 respectively Command Mode Global Configuration Mode User Guidelines 1 By default the mapping relation between tag cos and the egress queue is 0 TC1 1 TCO 2 TCO 3 TC1 4 TC2 5 TC2 6 TC3 7 TC3 2 Among the priority levels TCO TC3 the bigger value the higher priority Example Map CoS 5 to TC 2 TL SG5428 config qos queue cos map 5 2 qos queue dscp map Description The qos queue dscp map command is used to configure the mapping relation between DSCP Priority and the CoS value To return to the default configuration please use no qos queue dscp map command DSCP DiffServ Code Point is a new definition to IP ToS field given by IEEE This field is used to divi
162. ot1x max reauth req 5 dot1x Description The dot1x command is used to enable the IEEE 802 1X function for a specified port To disable the IEEE 802 1X function for a specified port please use no dot1x command Syntax dot1x no dot1x 81 Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the IEEE 802 1X function for port 1 TL SG5428 config interface gigabitEthernet 1 0 1 TL SG5428 config if dot1x dot1x guest vlan interface Description The dot1x guest vlan command is used to enable the guest VLAN function for a specified port To disable the Guest VLAN function for a specified port please use no dot1x guest vlan command Please ensure that the Control Type of the corresponding port is port based before enabling the guest VLAN function for it Syntax dot1x guest vlan no dot1x guest vlan Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the Guest VLAN function for port 2 TL SG5428 config interface gigabitEthernet 1 0 2 TL SG5428 config if dot1x guest vlan dot1x port control Description The dot1x port control command is used to configure the control mode of IEEE 802 1X for the specified port By default the control mode is auto To restore to the default configuration please use no dot1x port control command 82 Syntax dot1x port control
163. oup can manage the switch via the management station software The User and its Group have the same security level and access right Syntax snmp server user name local remote group name smode v1 v2c v3 slev noAuthNoPriv authNoPriv authPriv cmode none MD5 SHA cpwd confirm pwd emode none DES epwd encrypt pwd no snmp server user name 195 Parameter name User Name ranging from 1 to 16 characters local remote User Type with local and remote options Local indicates that the user is connected to a local SNMP engine while remote means that the user is connected to a remote SNMP engine group name The Group Name of the User The User is classified to the corresponding Group according to its Group Name Security Model and Security Level smode The Security Model of the User with v1 v2c and v3 options By default the option is v1 The Security Model of the User must be the same with that of the Group which the User belongs to slev The Security Level of SNMP v3 Group There are three options including noAuthNoPriv no authorization and no encryption authNoPriv authorization and no encryption and authPriv authorization and encryption By default the option is noAuthNoPriv The Security Level of the User must be the same with that of the Group which the User belongs to cmode The Authentication Mode of the SNMP v3 User with none MD
164. ow spanning tree bridge forward time hello time hold count max age max hops mode priority state Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the bridge parameters TL SG5428 config show spanning tree bridge show spanning tree interface Description The show spanning tree interface command is used to display the spanning tree information of all ports or a specified port Syntax show spanning tree interface gigabitEthernet port edge ext cost int cost mode p2p priority role state status Parameter port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode 179 Example Display the spanning tree information of all ports TL SG5428 config show spanning tree interface Display the spanning tree information of port 2 TL SG5428 config show spanning tree interface gigabitEthernet 1 0 2 Display the spanning tree mode information of port 2 TL SG5428 config show spanning tree interface gigabitEthernet 1 0 2 mode show spanning tree interface security Description The show spanning tree interface security command is used to display the protect information of all ports or a specified port Syntax show spanning tree interface security gigabitEthernet port bpdufilter bpduguard loop root tc tc defend Parameter port The Ethernet port number Command Mode Privileged EXEC Mod
165. policy action for specified ports Syntax redirect interface gigabitEthernet port Parameter port The destination port number of redirect Command Mode Action Configuration Mode Example Edit the actions for policy1 Forward the data packets matching ACL 120 in the policy to port 2 TL SG5428 config access list policy action policy1 120 160 TL SG5428 config action redirect interface gigabitEthernet 1 0 2 s condition Description The s condition command is used to configure Stream Condition function of policy action Syntax s condition rate rate osd none discard Parameter rate The rate of Stream Condition ranging from 0 to 100000kbps osd Out of Band disposal of Stream Condition It is the disposal way of the data packets those are transmitted beyond the rate There are two options none and discard By default the option is none Command Mode Action Configuration Mode Example Edit the actions for policy1 For the data packets matching ACL 120 in the policy if the rate beyond 1000kbps they will be discarded by the switch TL SG5428 config access list policy action policy1 120 TL SG5428 config action s condition rate 1000 osd discard s mirror Description The s mirror command is used to configure Stream Mirror function of policy action to the specified port Syntax s mirror interface gigabitEthernet port Parameter port The Mirror Port number of Stream Mirror Command
166. port 5 as 3 TL SG5428 config interface gigabitEthernet 1 0 5 TL SG5428 config if qos 3 qos cos Description The qos cos command is used to enable the mapping relation between IEEE802 1P Priority and TC egress queue To disable the mapping relation please use no qos cos command 135 Syntax qos cos no qos cos Command Mode Global Configuration Mode User Guidelines IEEE 802 1P gives the Pri field in IEEE 802 1Q tag a recommended definition When the mapping relation between IEEE 802 1P Priority and TC egress queue is enabled the data will be classified into the egress queue based on this mapping relation Example Enable the mapping relation between IEEE 802 1P Priority and egress queue TL SG5428 config qos cos qos dscp Description The qos dscp command is used to enable the mapping relation between DSCP Priority and CoS value To disable the mapping relation please use no qos dscp command Syntax qos dscp no qos dscp Command Mode Global Configuration Mode User Guidelines DSCP DiffServ Code Point is a new definition to IP ToS field given by IEEE DSCP priorities are mapped to the corresponding 802 1p priorities IP datagram will be classified into the egress queue based on the mapping relation between DSCP priority and CoS value Example Enable the mapping relation between DSCP Priority and CoS value TL SG5428 config qos dscp qos queue cos map 136 Description The qos queue c
167. prompt Run window as Figure 1 7 and click OK Type the name of a program folder document or Internet resource and Windows will open it for you Open Figure 1 7 Run Window 2 Open Telnet then type telnet 192 168 0 1 in the command prompt shown as Figure 1 8 and press the Enter button Dis Microsoft Windows XP Version 5 1 2666 lt C gt Copyright 1985 2661 Microsoft Corp D Documents and Settings Mdministrator gt telnet 192 168 B 1 Figure 1 8 Connecting to the Switch 3 Type the default user name and password admin admin then press the Enter button so as to enter User EXEC Mode Jl E User Access Login IEEE E User admin Password Figure 1 9 Enter into the User EXEC Mode Now you can manage your switch with CLI commands through Telnet connection 4 Type enable command to enter Privileged EXEC Mode A password that you have set through Console port connection is required Here the password is set as 123 ci Telnet 192 168 0 1 DEENEN ser Access User admin Password TL G5428 gt enable Password TL SG5428 _ Figure 1 10 Enter into the Privileged EXEC Mode gt Login Mode Firstly configure the Telnet login mode as login and both the connection password and the Privileged EXEC Mode password as 123 in the prompted DOS screen shown in Figure 1 11 TPLINK HyperTerminal File Edit Yiew Call Transfer Help TL S65428 gt enable TL SG5428tconfig TL SG54
168. raffic flow to improve the network security by forbidding the port to forward packets to the ports that are not on its forwarding port list port isolation Description The port isolation command is used to configure the forward port list of a port so that this port can only communicate with the ports on its port list To delete the corresponding configuration please use no port isolation command Syntax port isolation gi forward list gi forward list no port isolation Parameter gi forward list The list of Ethernet ports Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Set port 1 2 and 4 to the forward port list of port 5 TL SG5428 config interface gigabitEthernet 1 0 5 TL SG5428 config if port isolation gi forward list 1 0 1 2 1 0 4 Set all Ethernet ports to forward port list of port 2 namely restore to the default setting TL SG5428 config interface gigabitEthernet 1 0 2 TL SG5428 config if no port isolation show port isolation interface Description The show port isolation interface command is used to display the forward port list of a port 145 Syntax show port isolation interface gigabitEthernet port Parameter port The number of Ethernet port you want to show its forward port list in the format of 1 0 2 Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the forward list of p
169. rface gigabitEthernet interface range gigabitEthernet Example Specify the Link Type of port 4 as general then add it to VLAN 2 and configure the egress rule of port 4 as tagged TL SG5428 config interface gigabitEthernet 1 0 4 TL SG5428 config if switchport mode general 21 TL SG5428 config if switchport general allowed vlan 2 tagged switchport pvid Description The switchport pvid command is used to configure the PVID for the switch ports Syntax switchport pvid vian id Parameter vlan id Specify IEEE 802 1Q VLAN ID ranging from 1 to 4094 Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Specify the PVID of port 3 as 1 TL SG5428 config interface gigabitEthernet 1 0 3 TL SG5428 config if switchport pvid 1 show vlan summary Description The show vlan summary command is used to display the summarized information of IEEE 802 1Q VLAN Syntax show vlan summary Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the summarized information of IEEE 802 1Q VLAN TL SG5428 config show vlan summary 22 show vlan brief Description The show vlan brief command is used to display the brief information of IEEE 802 10 VLAN Syntax show vlan brief Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the brief information of IEEE 802 1Q VLAN TL SG5428 config sho
170. rivileged EXEC Mode Global Configuration Mode Interface Configuration Mode and VLAN Configuration Mode Interface Configuration Mode can also be divided into Interface gigabitEthernet Interface link aggregation and some other modes which is shown as the following diagram Interface Configuration Mode Interface ethernet Interface link aggregation Interface range ethernet Interface range link aggregation Interface vlan User EXEC Mode Password Privileged EXEC Global Configuration Mode Mode VLAN Configuration Mode The following table gives detailed information about the Accessing path Prompt of each mode and how to exit the current mode and access the next mode Mode Accessing Path Prompt Logout or Access the next mode Use the exit command to disconnect the i i switch except that the switch is User EXEC Primary mode once it p Mod is connected with the TL SG5428 gt connected through the Console port ocg switch Use the enable command to access Privileged EXEC mode Use the enable Enter the disable or exit command to ivi i return to User EXEC mode Privileged command to enter this TL SG5428 EXEC Mode mode from User EXEC Enter configure command to access mode Global Configuration mode Use the exit or the end command or press Ctrl Z to return to Privileged i EXEC mode Global a ee Use the interface gigabitEthernet port Configuration Wes TL SG5428 config or interface range gigabitEthernet mode from
171. rmation of the VLAN VPN Syntax show dot1q tunnel Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the global configuration information of the VLAN VPN TL SG5428 config show dot1q tunnel show dot1q tunnel interface Description The show dot1q tunnel interface command is used to display the configuration information of the VLAN VPN of the interfaces Syntax 30 show dot1q tunnel interface Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration information of of the VLAN VPN of the interfaces TL SG5428 config show dot1q tunnel interface show dot1q tunnel uplink Description The show dot1q tunnel uplink command is used to display the configuration information of the VLAN VPN Up link ports Syntax show dot1q tunnel uplink Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration information of the VLAN VPN Up link ports TL SG5428 config show dot1q tunnel uplink 31 Chapter6 Voice VLAN Commands Voice VLANs are configured specially for voice data stream By configuring Voice VLANs and adding the ports with voice devices attached to voice VLANs you can perform QoS related configuration for voice data ensuring the transmission priority of voice data stream and voice quality voice vlan Description The voice vlan command is used to enable Voice VLAN function To disable V
172. s Figure 1 2 shown Enter a name into the Name field and click OK Connection Description Y New Connection Enter a name and choose an icon for the connection Name tp link Bomen Figure 1 2 Connection Description 4 Select the port to connect in Figure 1 3 and click OK Connect To B tp link Enter details for the phone number that you want to dial Country region United States 1 Area code 0755 Phone number Connect using R I y Figure 1 3 Select the port to connect 5 Configure the port selected in the step above as the following Figure 1 4 shown Configure Bits per second as 38400 Data bits as 8 Parity as None Stop bits as 1 Flow control as None and then click OK COM1 Properties A Port Settings Bits per second Data bits Parity Stop bits Flow control Figure 1 4 Port Settings 6 The DOS prompt TL SG5428 gt will appear after pressing the Enter button as Figure 1 5 shown It indicates that you can use the CLI now TPLINK HyperTerminal File Edit View Call Transfer Help Connected 0 00 45 Auto detect 38400 8 N 1 Figure 1 5 Log in the Switch 1 1 2 Logon by Telnet To successfully create Telnet connection firstly CLl commands about configuring Telnet login mode login authentication information and Privileged EXEC Mode password should be configured through Console connection Telnet login has the following two modes
173. s sent when the multicast or broadcast rate exceeds the predefined value spanning tree Enable spanning tree trap It is sent when the port forwarding status changes or the port receives TCN packet or packet with TC flag Command Mode Global Configuration Mode Example Enable SNMP extended bandwidth control trap for the switch TL SG5428 config snmp server traps bandwidth control 201 snmp server traps mac Description The snmp server traps mac command is used to enable SNMP extended MAC address related traps which include four types new full learn mode change and max learned To disable the sending of SNMP extended MAC address related traps please use no snmp server traps mac command Syntax snmp server traps mac new full learn mode change max learned no snmp server traps mac new full learn mode change max learned Parameter new Enable new MAC address trap It is sent when the switch learns new MAC address including dynamic address static address and filter address full Enable MAC address table trap It is sent when the MAC address table is full learn mode change Enable MAC address learn mode change trap It is sent when MAC address learning mode of the switch changes max learned Enable MAC address max learned trap It is sent when the amount of learned MAC address reaches the limit which is configured in port security module Command Mode Global Configuration
174. show snmp server view command is used to display the View table Syntax show snmp server view Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the View table TL SG5428 show snmp server view show snmp server group Description The show snmp server group command is used to display the Group table Syntax show snmp server group Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the Group table TL SG5428 show snmp server group show snmp server user Description The show snmp server user command is used to display the User table 207 Syntax show snmp server user Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the User table TL SG5428 show snmp server user show snmp server community Description The show snmp server community command is used to display the Community table Syntax show snmp server community Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the Community table TL SG5428 show snmp server community show snmp server host Description The show snmp server host command is used to display the Host table Syntax show snmp server host Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the Host table TL SG5428 show snmp server host show snmp server enginelD 208 Description The show snmp server enginelD command is
175. snooping groups TL SG5428 show ip igmp snooping groups Display all the multicast entries in VLAN 5 TL SG5428 config show ip igmp snooping groups vlan 5 Display the count of multicast entries in VLAN 5 TL SG5428 config show ip igmp snooping groups vlan 5 count Display the dynamic multicast groups of VLAN 5 TL SG5428 config show ip igmp snooping groups vlan 5 dynamic Display the static multicast groups of VLAN 5 TL SG5428 config show ip igmp snooping groups vlan 5 static Display the count of dynamic multicast entries of VLAN 5 TL SG5428 config show ip igmp snooping groups vlan 5 dynamic count Display the count of static multicast entries of VLAN 5 TL SG5428 config show ip igmp snooping groups vlan 5 static count show ip igmp snooping filter Description The show ip igmp snooping filter command is used to display the Multicast Filter Address table Syntax show ip igmp snooping filter filter addr id list Parameter filter addr id list The multicast ID selected to display the multicast filter address information It is optional Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display all the multicast filter address information TL SG5428 config show ip igmp snooping filter 192 Chapter 29 SNMP Commande SNMP Simple Network Management Protocol functions are used to manage the network devices for a smooth communication which can facilitate the network administrators to monitor th
176. spanning tree mst instance 1 port priority 64 cost 2000 spanning tree priority Description The spanning tree priority command is used to configure the bridge priority To return to the default value of bridge priority please use no spanning tree priority command Syntax spanning tree priority pri no spanning tree priority Parameter pri Bridge priority ranging from 0 to 61440 It is 32768 by default Command Mode Global Configuration Mode Example Configure the bridge priority as 4096 TL SG5428 config spanning tree priority 4096 172 spanning tree tc defend Description The spanning tree tc defend command is used to configure the TC Protect of Spanning Tree globally To return to the default configuration please use no spanning tree tc defend command A switch removes MAC address entries upon receiving TC BPDUs If a malicious user continuously sends TC BPDUs to a switch the switch will be busy with removing MAC address entries which may decrease the performance and stability of the network Syntax spanning tree tc defend threshold threshold period period no spanning tree tc defend Parameter threshold TC Threshold ranging from 1 to 100 packets By default it is 20 TC Threshold is the maximum number of the TC BPDUs received by the switch in a TC Protect Cycle period TC Protect Cycle ranging from 1 to 10 in seconds By default it is 5 Command Mode Global Configuration Mode Example Config
177. t Some parameters must be entered in special formats which are shown as follows gt gt MAC Address must be entered in the format of xx xx Xx XX XX XX One or several values can be typed for a port list or a vlan list using comma to separate Use a hyphen to designate a range of values for instance 1 3 5 7 indicates choosing 1 3 4 5 7 The port number should format as 1 0 3 meaning unit slot port The unit number is always 1 and slot number is always O and the port number is a variable an actual value must be assigned 14 Chapter 2 User Interface enable Description The enable command is used to access Privileged EXEC Mode from User EXEC Mode Syntax enable Command Mode User EXEC Mode Example If you have set the password to access Privileged EXEC Mode from User EXEC Mode TL SG5428 gt enable Enter password TL SG5428 enable password Description The enable password command is used to set the password for users to access Privileged EXEC Mode from User EXEC Mode To return to the default configuration please use no enable password command Syntax enable password password no enable password Parameter password super password which contains 16 characters at most composing digits English letters and underlines only By default it is empty Command Mode Global Configuration Mode Example Set the super password as admin to access Privileged EXEC Mode from User EXEC Mode TL SG54
178. t for the response before resending a request to the supplicant ranging from 1 to 9 in second By default itis 3 Command Mode Global Configuration Mode Example Configure the IP address of the accounting server as 10 20 1 100 and password as tplink TL SG5428 config radius auth pri 10 20 1 100 auth key tplink radius server account Description The radius server account command is used to enable the accounting feature To disable the accounting feature please use no radius server account command Syntax radius server account no radius server account Command Mode Global Configuration Mode Example Enable the accounting feature TL SG5428 config radius server account show dot1x global Description The show dot1x global command is used to display the global configuration of 801 X Syntax show dot1x global 85 Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration of 801 X globally TL SG5428 config show dot1x global show dot1x interface Description The show dot1x interface command is used to display all ports or the specified port s configuration information of 801 X Syntax show dot1x interface gigabitEthernet port Parameter port The number of the Ethernet port Display the configuration of all the ports by default Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration informatio
179. t port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the flow control information of all Ethernet ports TL SG5428 show interface flowcontrol Display the flow control information of port 2 TL SG5428 show interface gigabitEthernet 1 0 2 flowcontrol show interface configuration Description The show interface configuration command is used to display the configurations of all ports or an Ethernet port including Port status Flow Control Negotiation Mode and Port description Syntax show interface gigabitEthernet port configuration 132 Parameter port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configurations of all Ethernet ports TL SG5428 config show interface configuration Display the configurations of port 2 TL SG5428 config show interface gigabitEthernet 1 0 2 configuration show storm control Description The show storm control command is used to display the storm control information of Ethernet ports Syntax show storm control interface gigabitEthernet port range gigabitEthernet port list y Parameter port The Ethernet port number port list The list of Ethernet ports Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the storm control information of port 4 5 6 and 7 TL SG5428 config show storm control interface range gigabitEth
180. t to IEEE 802 1Q VLAN To delete the corresponding VLAN s please use no switchport trunk allowed vlan command Syntax switchport trunk allowed vlan vlan list 20 no switchport trunk allowed vlan van Jet Parameter vlan list Specify IEEE 802 1Q VLAN ID list ranging from 2 to 4094 in the format of 2 3 5 It is multi optional Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Specify the Link Type of port 2 as trunk and add it to VLAN 2 TL SG5428 config interface gigabitEthernet 1 0 2 TL SG5428 config if switchport mode trunk TL SG5428 config if switchport trunk allowed vlan 2 switchport general allowed vlan Description The switchport general allowed vlan command is used to add the desired General port to IEEE 802 1Q VLAN and specify the egress rule To delete the corresponding VLAN s please use no switchport general allowed vlan command Syntax switchport general allowed vlan vian list tagged untagged no switchport general allowed vlan vian list Parameter vlan list Specify IEEE 802 1Q VLAN ID list ranging from 2 to 4094 in the format of 2 3 5 It is multi optional tagged untagged Egress rule untagged or tagged Tagged All packets forwarded by the port are tagged The packets contain VLAN information Untagged Packets forwarded by the port are untagged Command Mode Interface Configuration Mode inte
181. tEthernet 1 0 3 TL SG5428 config if snmp server traps link status 200 snmp server traps Description The snmp server traps command is used to enable SNMP extended traps To disable the sending of SNMP extended traps please use no snmp server traps command Syntax snmp server traps bandwidth control cpu flash ipaddr change lldp loopback detection storm control spanning tree no snmp server traps bandwidth control cpu flash ipaddr change Ildp loopback detection storm control spanning tree Parameter bandwidth control Enable bandwidth control trap It is sent when the rate limit function is enabled and the bandwidth exceeds the predefined value cpu Allow CPU related trap It is sent when CPU usage exceeds the predefined threshold By default the CPU usage threshold of the switch is 80 flash Enable flash trap It is sent when flash is modified during operations such as backup reset firmware upgrade configuration import etc ipaddr change Enable ipaddr change trap It is sent when IP address is changed such as user manually modifies the IP address or the switch obtains a new IP address from DHCP Ildp Enable lldp trap It is sent when the port s neighbor changes loopback detection Enable loopback detection trap It is sent when the switch detects loopback or loopback is cleared storm control Enable storm control trap It i
182. the system time as 02 14 2012 12 30 00 TL SG5428 config system time manual 02 14 2012 12 30 00 system time ntp Description The system time ntp command is used to configure the time zone and the IP Address for the NTP Server The switch will get UTC automatically if it has connected to a NTP Server Syntax system time ntp timezone ntp server backup ntp server fetching rate Parameter timezone Your local time zone and it ranges from UTC 12 00 to UTC 13 00 The detailed information that each time zone means are displayed as follow UTC 12 00 TimeZone for International Date Line West 107 UTC 11 00 TimeZone for Coordinated Universal Time 11 UTC 10 00 TimeZone for Hawaii UTC 09 00 TimeZone for Alaska UTC 08 00 TimeZone for Pacific Time US Canada UTC 07 00 TimeZone for Mountain Time US Canada UTC 06 00 TimeZone for Central Time US Canada UTC 05 00 TimeZone for Eastern Time US Canada UTC 04 30 TimeZone for Caracas UTC 04 00 TimeZone for Atlantic Time Canada UTC 03 30 TimeZone for Newfoundland UTC 03 00 TimeZone for Buenos Aires Salvador Brasilia UTC 02 00 TimeZone for Mid Atlantic UTC 01 00 TimeZone for Azores Cape Verde Is UTC TimeZone for Dublin Edinburgh Lisbon London UTC 01 00 TimeZone for Amsterdam Berlin Bern Rome Stockholm Vienna UTC 02 00
183. time range Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration of Time Range TL SG5428 config show time range show holiday Description The show holiday command is used to display the defined holiday Syntax show holiday Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the defined holiday TL SG5428 config show holiday show access list Description The show access list command is used to display configuration of ACL 163 Syntax show access list acl id Parameter acl id The ID of the ACL selected to display the configuration Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configuration of the MAC ACL whose ID is 20 TL SG5428 config show access list 20 show access list policy Description The show access list policy command is used to display the information of a specified policy Syntax show access list policy name Parameter name The Policy Name desired to show Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the information of a policy named policy1 TL SG5428 config show access list policy policy1 show access list bind Description The show access list bind command is used to display the configuration of Policy bind Syntax show access list bind Command Mode Privileged EXEC Mode and Any Configuration Mode 164 Example Displa
184. tion mode so as to prepare further configurations such as password and login mode for virtual terminal O to 5 55 TL SG5428 config line vty 0 5 password Description The password command is used to configure the connection password To clear the password please use no password command Syntax password password no password Parameter password Configure the connection password which contains 16 characters at most composing digits English letters and underlines only Command Mode Line Configuration Mode Example Configure the connection password of Console port connection 0 as tplink TL SG5428 config line console 0 TL SG5428 config line password tplink Configure the connection password of virtual terminal connection 0 5 as tplink TL SG5428 config line vty 0 5 TL SG5428 config line password tplink login Description The login command is used to configure the login of a switch without using the user name and password At this situation a connection password must be set for virtual terminal connection Syntax login 56 Command Mode Line Configuration Mode Example Configure the login of Console port connection 0 as login mode TL SG5428 config line console 0 TL SG5428 config line login Configure the login of virtual terminal connection 0 5 as login mode TL SG5428 config line vty 0 5 TL SG5428 config line login login local Description The login local command is use
185. tion of all the ports will be displayed Syntax show lldp local information interface gigabitEthernet port Parameter port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the LLDP and LLDP MED local information of port 1 TL SG5428 show Ildp local information interface gigabitEthernet 1 0 1 show lldp neighbor information interface Description The show Ildp neighbor information interface command is used to display the LLDP and LLDP MED neighbor information of the corresponding port By 216 default the neighbor information of all the ports will be displayed Syntax show lldp neighbor information interface gigabitEthernet port Parameter port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the LLDP and LLDP MED neighbor information of port 1 TL SG5428 show lldp neighbor information interface gigabitEthernet 1 0 1 show Ildp traffic interface Description The show Ildp traffic interface command is used to display the LLDP statistic information between the local device and neighbor device of the corresponding port By default the LLDP statistic information of all the ports will be displayed Syntax show Ildp traffic interface gigabitEthernet port Parameter port The Ethernet port number Command Mode Privileged EXEC Mode and Any Configuration Mode
186. to 16 characters By default it is public descript The description of the event ranging from 1 to 16 characters By default it is empty type The event type with none log notify and both options None indicates no processing log indicates logging the event notify indicates sending trap messages to the management station and both indicates logging the event and sending trap messages to the management station owner name The owner of the event entry ranging from 1 to 16 characters By default it is monitor 204 Command Mode Global Configuration Mode Example Configure the user name of entry 1 2 3 and 4 as user the description of the event as description1 the type of event as log and the owner of the event as ownerl TL SG5428 config rmon event 1 4 user user1 description description1 type log owner owner rmon alarm Description The rmon alarm command is used to configure SNMP RMON Alarm Management To return to the default configuration please use no rmon alarm command Alarm Group is one of the commonly used RMON Groups RMON alarm management allows monitoring the specific alarm variables When the value of a monitored variable exceeds the threshold an alarm event is generated which triggers the switch to act in the set way Syntax rmon alarm index interface gigabitEthernet port alarm variable drop revbyte revpkt bpkt mpkt crc lign undersize oversize fragment
187. to use the CLI CLI Command Modes Security Levels and some Conventions Chapter 2 User Interface Provide information about the commands used to switch between five CLI Command Modes Chapter 3 IEEE 802 1Q VLAN Commands Provide information about the commands used for configuring IEEE 802 1Q VLAN Chapter 4 Protocol VLAN Commands Provide information about the commands used for configuring Protocol VLAN Chapter 5 VLAN VPN Commands Provide information about the commands used for configuring VLAN VPN Virtual Private Network function Chapter 6 Voice VLAN Commands Provide information about the commands used for configuring Voice VLAN Chapter 7 Private VLAN Commands Provide information about the commands used for configuring Private VLAN Chapter 8 GVRP Commands Provide information about the commands used for configuring GVRP GARP VLAN registration protocol Chapter 9 EtherChannel Commands Provide information about the commands used for configuring LAG Link Aggregation Group and LACP Link Aggregation Control Protocol Chapter 10 User Manage Commands Provide information about the commands used for user management Chapter 11 Binding Table Commands Provide information about the commands used for binding the IP address MAC address VLAN and the connected Port number of the Host together Chapter 12 ARP Inspection Commande Provide information about the commands used for protecting the switch from the ARP ch
188. ttack by limiting the maximum number of the MAC addresses that can be learned on the port The port with Port Security feature enabled will learned the MAC address dynamically When the learned MAC address number reaches the maximum the port will stop learning Therefore the other devices with the MAC address unlearned can not access to the network via this port Syntax mac address table max mac count max number num mode dynamic static permanent status disable enable no mac address table max mac count Parameter num The maximum number of MAC addresses that can be learned on the port It ranges from 0 to 1024 By default this value is 1024 dynamic static permanent Learn mode for MAC addresses There are three modes including Dynamic mode Static mode and Permanent mode When Dynamic mode is selected the learned MAC address will be deleted automatically after the aging time When Static mode is selected the learned MAC address will be out of the influence of the aging time and can only be deleted manually The learned entries will be cleared after the switch is rebooted When permanent mode is selected the learned MAC address will be out of the influence of the aging time and can only be deleted manually too However the learned entries will be saved even the switch is rebooted 102 status Enable or disable the Port Security function for a specified port By default this functi
189. ttp GEES REESEN SNE Ee ae eee 97 ip http secure server download certificate nnseneeeeeee eere reee eere tetr tnte ttretrtr nnne trrerer nnne reer ene 97 ip http secure server download key 98 show ip http secure serverf cococccccococonanononnnnnnnnnnnnn cnn non nono nr nn nn nn nn nn n nn nn nn nn nr nn nr nn nn nn nn nn nn nnnnnnnnnnnos 99 Chapter 19 MAC Address Commande ccoooooonccnncncncconnnononnnncnnnnnnnnnnnnnnnnnnnnnnncnnnnnnnns 100 Lee le LEE 100 mac address table AgGing time cccccecscecceeceeeceeeceeeneeeneeeseeeseeeseecaeeaaeeaaeenaeeaaeenaeeaaeeaaees 101 mac address table filtering oooonnnnninicinnd cnnnnnoococccnnnnonnnnnnronncononcnnnnnnnonocononnnnoncnnnnnncnnnn 101 mac address table Max Mac COUNt occcccnnncnnncnnncnnnnnnnnnnnnnnnnnnnononnnnnnnnnnnnnnnnnnnnnnnnnnnnnonanennnin 102 show mac address table address 103 show mac address table agmmg me 103 show mac address table max mac count interface gigabitEthernet ssssseseeereeseererrre re 104 show mac address table interface gigabitEthernet ececcceccecceeeeeeeeeeneeeeeeeeeesesneneeaees 104 show mac address table mac num eee eee eaee sees eee eaeeeaae seas sees eaaeaaeeaaeeaaeeaaeeaaes 105 show mac address table marc 105 show mac address table van 106 VI Chapter 20 System Configuration Commande 107 SY SIS MAME MANUAL tii A A iia td he 107 systemtime AUD EE 107 system time dst predefined oooocono
190. ure TC Threshold as 30 packets and TC Protect Cycle as 10 seconds TL SG5428 config spanning tree tc defend threshold 30 period 10 spanning tree timer Description The spanning tree timer command is used to configure forward time hello time and max age of Spanning Tree To return to the default configurations please use no spanning tree timer command Syntax spanning tree timer forward time forward time hello time hello time max age max age no spanning tree timer 173 Parameter forward time Forward Delay which is the time for the port to transit its state after the network topology is changed Forward Delay ranges from 4 to 30 in seconds and it is 15 by default Otherwise 2 Forward Delay 1 gt Max Age hello time Hello Time which is the interval to send BPDU packets and used to test the links Hello Time ranges from 1 to 10 in seconds and it is 2 by default Otherwise 2 Hello Time 1 lt Max Age max age The maximum time the switch can wait without receiving a BPDU before attempting to reconfigure ranging from 6 to 40 in seconds By default it is 20 Command Mode Global Configuration Mode Example Configure forward time hello time and max age for Spanning Tree as 16 seconds 3 seconds and 22 seconds respectively TL SG5428 config spanning tree timer forward time 16 hello time 3 max age 22 spanning tree hold count Description The spanning tree hold count
191. very mode auto manual H Parameter process mode The mode how the switch processes the detected loops Alert When a loop is detected display an alert Port based When a loop is detected display an alert and block the port recovery mode The mode how the blocked port recovers to normal status Auto Block status can be automatically removed after recovery time Manual Block status can only be removed manually Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Configure the loopback detection process mode as port based and recovery mode as manual for port 2 TL SG5428 config interface gigabitEthernet 1 0 2 TL SG5428 config if loopback detection config process mode port based recovery mode manual loopback detection recover Description The loopback detection recover command is used to remove the block status of selected ports recovering the blocked ports to normal status 149 Syntax loopback detection recover Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Recover the blocked port 2 to normal status TL SG5428 config interface gigabitEthernet 1 0 2 TL SG5428 config if loopback detection recover show loopback detection global Description The show loopback detection global command is used to display the global configuration of loopback detection function such as loopb
192. w vlan brief show vlan Description The show vlan command is used to display the detailed information of the specified IEEE 802 1Q VLAN Syntax show vlan id vian list Parameter vlan list Specify IEEE 802 1Q VLAN ID ranging from 1 to 4094 It is multi optional Using the show vlan command without parameter displays the detailed information of all VLANs Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the detailed information of all VLANs TL SG5428 config show vian Display the detailed information of VLAN 2 TL SG5428 config show vlan id 2 Display the detailed information of VLAN 3 10 TL SG5428 config show vlan id 3 10 23 Chapter A Protocol VLAN Commands Protocol based VLAN Virtual Local Area Network is the way to classify VLANs based on Protocols A Protocol corresponds to a VLAN ID The untagged packets and the priority tagged packets matching the protocol template will be tagged with this VLAN ID protocol vlan template Description The protocol vlan template command is used to create Protocol based VLAN template To delete Protocol based VLAN template please use no protocol vian template command Syntax protocol vlan template name protoco name ether type type no protocol vlan template template idx Parameter protocol name Give a name to the Protocol based VLAN Template which contains 8 characters at most type The Ethernet protocol type in t
193. y please use no access list policy name command A Policy is used to control the data packets those match the corresponding ACL rules by configuring ACLs and actions together for effect The operations here include stream mirror stream condition QoS Remarking and redirect access list policy name name no access list policy name name Parameter name The Policy Name ranging from 1 to 16 characters Command Mode Global Configuration Mode Example Add a Policy named policy1 TL SG5428 config access list policy name policy 1 159 access list policy action Description The access list policy action command is used to add ACLs and create actions for the policy To set the detailed configuration of actions for a policy please use access list policy action command to access Action Configuration Mode To delete the corresponding actions please use no access list policy action command Syntax access list policy action policy name acl id no access list policy action policy name acl id Parameter policy name The Policy Name ranging from 1 to 16 characters acl id The ID of the ACL to which the above policy is applied Command Mode Global Configuration Mode Example Add ACL whose ID is 120 to policy1 and create an action for them TL SG5428 config access list policy action policy1 120 redirect interface Description The redirect interface command is used to configure Direction function of
194. y the configuration of Policy bind TL SG5428 config show access list bind 165 Chapter 27 MSTP Commands MSTP Multiple Spanning Tree Protocol compatible with both STP and RSTP and subject to IEEE 802 1s can disbranch a ring network STP is to block redundant links and backup links as well as optimize paths spanning tree global Description The spanning tree command is used to enable STP function globally To disable the STP function please use no spanning tree command Syntax spanning tree no spanning tree Command Mode Global Configuration Mode Example Enable the STP function TL SG5428 config spanning tree spanning tree interface Description The spanning tree command is used to enable STP function for a port To disable the STP function please use no spanning tree command Syntax spanning tree no spanning tree Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the STP function for port 2 TL SG5428 config interface gigabitEthernet 1 0 2 166 TL SG5428 config if spanning tree spanning tree common config Description The spanning tree common config command is used to configure the parameters of the ports for comparison in the CIST and the common parameters of all instances To return to the default configuration please use no spanning tree common config command CIST Common and Internal Spanning Tree is the spanni
195. yntax spanning tree guard loop no spanning tree guard loop 176 Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the Loop Protect function for port 2 TL SG5428 config interface gigabitEthernet 1 0 2 TL SG5428 config if spanning tree guard loop spanning tree guard root Description The spanning tree guard root command is used to enable the Root Protect function for a port With the Root Protect function enabled the root bridge will set itself automatically as ERROR PORT when receiving BPDU packets with higher priority in order to maintain the role of root ridge To disable the Root Protect function please use no spanning tree guard root command Syntax spanning tree guard root no spanning tree guard root Command Mode Interface Configuration Mode interface gigabitEthernet interface range gigabitEthernet Example Enable the Root Protect function for port 2 TL SG5428 config interface gigabitEthernet 1 0 2 TL SG5428 config if spanning tree guard root spanning tree guard tc Description The spanning tree guard tc command is used to enable the TC Protect of Spanning Tree function for a port To disable the TC Protect of Spanning Tree function please use no spanning tree guard tc command A switch removes MAC address entries upon receiving TC BPDUs If a malicious user continuously sends TC BPDUs to a switch the switch will be busy with

Download Pdf Manuals

Related Search

Related Contents

取扱説明書 - 山田照明  Portrait Professional 10  European Mode S Station Functional Specification  „Buffet“ - Bartscher  

Copyright © All rights reserved.

• https://telegra.ph/Wire-Size-Calculator-From-Voltage-Drop-63068a26-11-16
• https://telegra.ph/AC-Single-phase-Voltage-Drop-Calculator-eb72a73a-11-16
• https://telegra.ph/1-5-10-Concrete-Mix-Calculator-9f86c277-11-16
• https://telegra.ph/Concrete-Volume-Calculator-for-Curbs-Gutters-58424e13-11-16
• https://telegra.ph/Concrete-Volume-Calculator-for-Steps-779e9f80-11-17
• https://telegra.ph/1-5-10-Concrete-Mix-Calculator-7456ca72-11-17
• https://telegra.ph/1-4-8-Concrete-Mix-Calculator-533b2965-11-13
• https://telegra.ph/DC-Voltage-Drop-Calculator-671acc44-11-18
• https://telegra.ph/Calculate-Wire-Resistor-from-Voltage-Drop-140bd69a-11-18
• https://telegra.ph/Calculate-Current-from-Voltage-Drop-0771fa20-11-18