Home

Toshiba YL768/40 User's Manual

1. 18 Auto TUNING 20 Manual Tuning eee 21 TONING een axo pe roO ER YS 21 ie ib eese Sorting positions DTV Manual Tuning Manual Tuning eeee Manual Tuning for DVB C Manual Tuning for DVB S DTV Settings ped van us cuo Pel Ki pir nde Channels Antenna Cable 24 Channels Satellite 25 Standby Channel Update 26 DVB Character 26 Dynamic nen teneo ee 26 Location setting esses 26 Analogue switch off 26 CONTROLS AND FEATURES General controls ccceeeeeeeeeeceeeeaeeeeeeeee ees 27 Quick Menu ou 27 Selecting positions 27 The Time Display analogue only 27 Stereo and Bilingual transmissions 27 Using 3D functions iei 28 Viewing 3D images 28 Switching display mode or selecting 3D format i coc ce ere ero teo teas 28 Setting the auto start mode 30 Setting the 3D PIN code 30 Setting 3D Start Message 30 Setting 3D Lock Setting 3D
2. 10 Panel Eocle oit eire The tiers t en Programme Timers digital only On qase eo eer e e Re I Sleep Tim r penna rod id Energy Saving Settings Automatic Power Down No Signal Power Down Digital on screen information and Programme Guider urget ee ere ga Informati n n ecol b Eee GUIS see amesa UR ERR RE HERE Genre selection searching Digital settings parental control Setting the PIN Parental Network Lock Digital settings Channel Options Selecting favourite channels Favourite Channel Lists Skip channels Locking channels oaeee Digital settings other settings Subtes Cries wea Wien ione e eoe ren Audio languages eI Common Interface Software Upgrade and Licences Auto Upgrade A Searching for New Software Network Upgrade Software Licences System Information and Reset TV 70 System Information ssseeeeeeeeee 70 Reset TV i eec e Eee ER Eon TR DERE 70 PC Settings
3. Control panel touch sensor Em RED LED Standby BLUE LED Power on Using the remote control Press MENU on the remote control to display the menu The menu appears as a list of five topics As each symbol is selected by pressing on the remote control its respective options will appear below NOTE The same menu is displayed in DTV Digital TV and ATV Analogue TV modes however where some items are not available in a mode they will appear greyed out To use the option press and W on the remote control to move up and down and press to select your desired setting Follow the on screen instructions The functions of each menu are described in detail throughout the manual Using the controls and connections To alter the volume gently touch 21 To alter the programme position touch W P A Touch MENU and 22 or V A to control the sound and picture options Touch MENU to finish The Media Player feature provides access to photo movie and music files stored on a USB storage device that is connected via USB 1 USB 2 provides access to photos only NOTE The USB socket has limited functionality and Toshiba can take no responsibility for damage to other connected equipment To select an external input press until the appropriate input source is selected Please always refer to the owner s manual of the equipment to be connected for full details 15 SETTING
4. HIERHER D REN Ra et e dena 70 Horizontal and Vertical Position 70 Clock Plast or ee rtr RE na 70 Sampling Clock 71 Reset iecore De E 71 Input selection and AV connections 71 Input selection sse 71 External input skip eee 72 Labeling video input sources 72 Colour Decoding 72 PC T RAE 73 HDMI 2 Audio des 73 Side Shared Audio E HDMI Seffings rr ede enne od cede 73 Digital Audio Output 74 Using REGZA LINK ese 75 Enable REGZA LINK 75 TV Auto Powel oie dee ehe ta eene ce Auto Standby Amplifier Control Speaker Preference REGZA LINK input source selection 75 REGZA LINK playback device control 76 REGZA LINK one touch play 76 REGZA LINK system standby 76 REGZA LINK system audio control 76 Toshiba PC compatible with REGZA LINK 76 TEXT SERVICES Text services exa erre rene euo wens 77 Selecting modes 77 Text information ssseeee 77 Navigating pages using Auto 77 Navigating pages using LIST 77 Control iue 78 PROBLEM SOLVING Questio
5. With the focus on a particular genre press desired colour key to assign Four colours will be available to set Press RETURN to go back to the guide screen Press the YELLOW button to access the Genre Search screen Genre Search 10 50 Tue 6 Apr E Movies ap InIGIBImi2ziBIBITmTI EH Hard Rain Wed 27 Apr 0 15 1 45 Red Corner Wed 2T Apr 22 15 23 55 The Lawnmower Man Thu 28 1 20 3 00 ow Fri 29 Apr 1 30 3 00 aa Sat 30 Apr 0 45 2 40 Body and Soul 8130 Apr 1 15 3 00 The Nun s Story 52130 Apr 15 00 17 30 9 RedComer Sat 30 Apr 23 20 1 15 The Real Blonde Sun May 0 40 2 00 Sunt May 0 40 2 20 Indiana Jones and the Temple of Doom Sun 1 May 21 10 23 20 Sun 1 May 23 20 1 15 Cou De Ville Mon May 1 10 3 00 m El 1 E o m o m E El E m e Press to select the genre Programmes listed will change for the new genre Press A or V to highlight a particular programme Qe When a current programme is selected pressing OK will tune to that programme When a future programme is selected pressing OK will open the Edit Timer menu For information on a highlighted programme press 1 To exit the Genre Search and go back to the guide screen press the YELLOW button 65 CONTROLS AND FEATURES Digital settings parental control Parental Setup The Parental Control feature allows you to block progr
6. 40 Automatic Format Widescreen 40 4 3 Stretch Blue Screen snra eite aest Picture Position esses 41 Picture still 4 este rtt rr tror iren 41 HDMI Information Display Al Using your home network 42 Setting up the Network 43 Wireless Setup eee 43 Advanced Network Setup 45 DNS Setup denies epe ede vans ene WG 46 Network Connection Test 47 Using the software keyboard 47 Setting up the Media Renderer feature 48 Insta lation oes eod 48 Media Renderer 48 Device Name Setup Web Password Setup 49 Media Controller Setup 49 Maximum Volume Setup 49 Using YouTube 50 Using the Function Menu 50 Using the Media Player 52 Basic operation 53 Viewing photo files 54 Viewing movie files on a DLNA CERTIFIED Server or USB device 56 Playing music files on a DLNA CERTIFIED Server or USB device 58 Using the Photo Frame feature 59 To open Photo Frame 59 Setting the features
7. Two people are required for installation cushioned surface such as a quilt or blanket Leave the Never use the four screws attached to the TV stand protruding over the edge of the surface DAE from another manufacturer use the NOTE Extreme care should always be used when PP removing the pedestal stand to avoid damage to the LCD 1 Unplug and remove any cables and or other component panel connectors from the rear of the TV 2 Carefully lay the front of the unit face down on a flat 2 Remove the five screws cushioned surface such as a quilt or blanket 3 Follow the instructions provided with your wall bracket Before proceeding make sure the appropriate bracket s fev Five screws are attached to the wall and the back of the TV as described rir c in the instructions provided with the wall bracket M 4 Make sure to place the spacers supplied between the bracket and the back of the TV 3 Once you have removed all five screws holding the pedestal stand in place remove the pedestal stand from the TV by sliding the pedestal stand away from the TV 5 Always use the screws supplied or recommended by the wall mount manvfacturer Screw Wall bracket Spacer supplied TV back panel Do not reuse these screws for attaching a wall bracket Place four spacers supplied INSTALLING YOUR TV When using the 3D glasses About handling the 3D glasses Do not leave the 3D
8. t may take time for the TV to load and begin playing back content Service content and the look and feel of the interface may be changed at any time without prior notice Using the Function Menu The Function Menu provides easy access to functions that are commonly used 1 Press the BLUE button while displaying YouTube The Function menu window will appear X A Back Forward Reload Home Pointer Menu http www youtube com xl e Press or P to select the desired icon and press OK a N Item Description Back Returns to the previous page Forward Moves to the forward page Reload Updates the displayed page Abort Aborts update X is displayed while reading and lt is displayed in other case Home Returns to the top page of YouTube Pointer Switches the pointer On Off or drag mode Menu Switches the frame or sets various settings Switching the pointer The tool that operates the screen can be changed to pointer or drag mode 1 From the Function menu press lt d or P to select Pointer and then press OK If you select see To use the Pointer ON on this page If you select 97 see To use Drag Mode on this page To use the Pointer ON 1 Press A or W to select Pointer and press OK Wy will appear Press A to the place where X changes to by and then press OK NOTE When Pointer OFF is selected and A
9. 29 97 30Hz 67 5 67 43Hz 148 352 148 500MHz Frame Packing 33 716 33 75Hz 74 176 74 250MHz Side by Side Half Top and Bottom 59 940 60Hz 67 433 67 500Hz 148 352 148 500MHz Side by Side Half Top and Bottom Side by Side Full is compos Side by Side Full Side by Side Half L 2D Video 3D Video L R 2D Video 3D Video 87 ed of left and right stereoscopic pictures that each size is equal to 2D INFORMATION Specifications and accessories Receiving systems DVB T Broadcast systems channels Nicam 2 carrier system Stereo Broadcast systems channels UK UHF 21 68 PAL I UHF UK21 UK69 Visible Screen Size Model 40 102cm France VHF 05 10 VHF 01 05 PAL B G UHF E21 E69 approx UHF 21 69 VHF E2 E12 51 541 nid 16 9 Sound output Main 10W 10W Germany UE gt eps pM at 1096 distortion Woofer 10W Austria VHF 05 12 SECAM D K R21 R69 Power consumption pbi 2 21 69 R1 R12 Annual power AOWL768 195 6kWh Switzerland us 2r a consumption 40YL768 195 6kWh 7 approx Italy VHF 05 12 D E F G H H1 H2 On mode power 40WL768 133W UHF 21 69 consumption 40YL768 133W Spain UHF 21 69 approx Nederlands VHF 05 12 Standby power 0 3W UHF 21 69 consumption Greece VHF 05 12 approx UHF 21 69 Off mode power 0 01W consumption DVB C Broadcast systems approx eye sat Broadcast sys
10. MPEG 4 AVC H 264 Dolby Digital AC 3 PCM divx div avi DivX DivX 3 4 5 6 PCM ADPCM MPEG 1 2 Layer2 MP2 MPEG 1 2 Layer3 MP3 Dolby Digital AC 3 mp4 m4v MP4 MPEG 4 AVC H 264 MPEG2 4 LC asf wmv ASF WMY9 WMA Std Profile DivX HD 1080p Profile External subtitle file srt is supported Maxmum resolution 1920 x 1080 Maxmum file size Unlimited Maxmum number of files 1000 folder Music Extension System Audio Codecs mp3 MP3 MPEG 1 2 Layer3 MP3 mp4 m4a MP4 MPEG2 4 LC AAC wma WMA WMA Std Maxmum file size Unlimited Maxmum number of files 1000 folder NOTE Playback in all file formats listed above can not be guaranteed 86 INFORMATION Acceptable signal formats for 3D Resolution Aspect ratio V Frequency H Frequency Pixel Clock Frequency 3D Structure 720 x 480p 16 9 59 940 60Hz 31 469 31 50Hz 27 000 27 027MHz Side by Side Full Side by Side Half Top and Bottom 1280 x 720p 59 940 60Hz 90 0 89 91Hz 148 352 148 500MHz Frame Packing 44 955 45 000Hz 74 176 74 250MHz Side by Side Half Top and Bottom 1920 x 1080i 59 940 60Hz 33 716 33 750Hz 74 176 74 250MHz Side by Side Half Top and Bottom 1920 x 1080p 23 976 24Hz 54 53 94Hz 148 352 148 500MHz Frame Packing 26 973Hz 74 176 74 250MHz Side by Side Half Top and Bottom
11. Press 3D while viewing 3D mode Trigger of Switching From the Quick Menu in 2D mode Display Mode Input Signal 1 In the QUICK Menu press A or V to select 3D Type Additional Format Source Settings and then press OK Info Signal 3D With 3D Auto FP D x Press A or W to select 2D Format Select and press Format Detect OK Signal Information i Press or P to select Native NOTE When Frame Packing is input 2D Format Select will be grayed out SBS TB 5 5 Without 3D SBS Auto Detect Information TB C S 2D Format Signal Correct 2D image 29 CONTROLS AND FEATURES Setting the auto start mode Controls what the TV does when it detects a 3D signal Press MENU and lt or P to select the PREFERENCES menu Press or V to select 3D Setup and press OK PREFERENCES REGZA LINK Setup Network Setup Media Renderer Setup Photo Frame Setup Teletext Panel Lock Press A or V to select 3D Auto Start Press or P to select 3D 2D or Off Option Description 3D Displays as 3D mode automatically when 3D format signal is received 2D Displays as 2D mode automatically when 3D format signal is received Off Displays a screen that allows you to select 3D or 2D when 3D format signal is received Setting the 3D PIN code A 3D PIN code is necessary for usin
12. Press MENU and select SETUP menu Use V to highlight Ant Cable Satellite and use P to select Antenna Cable or Satellite NOTE When you attempt to change the Ant Cable Satellite setting a warning message will appear followed by PIN entry if PIN has been set and a prompt for Auto Tuning When Ant Cable Satellite is set to Cable the following setting options will be provided in the Auto Tuning screen Press or V to select an item and then press to select your desired option Auto Tuning Tuning Mode DTV and ATV Start Scan DTV Scan Type Quick Scan Start Frequency Auto End Frequency Auto Modulation Auto Symbol Rate Auto Network ID Auto With the exception of DTV Scan Type and DTV Modulation items all of the following items will have 2 operating modes The first is Auto where the values for each item are preset by the system The second is an Input mode where you will be able to enter a single value in place of the pre set value If no channel is currently tuned and the Input state is chosen a system default value will be shown However if a channel is currently tuned when the item is accessed the value of the current channel will be displayed DTV Scan Type This item determines whether a Quick Scan or a Full Scan will be executed The Quick Scan is a simplified version of the Full Scan that is designed to complete in less time DTV Start Frequency This sets the frequency
13. The recommended HDMI to DVI adaptor cable length is 6 6 ft 2m An HDMI to DVI adaptor cable transfers video only Separate analogue audio cables are required See HDMI 2 Audio on page 73 Cure Audio cable for HDMI to television connection not supplied HDMI to DVI adaptor Cable NOTE To ensure that the HDMI or DVI device is reset properly it is recommended that you follow these procedures When turning on your electronic components turn on the television first and then the HDMI or DVI device When turning off your electronic components turn off the HDMI or DVI device first and then the television HDMI s ARC Audio Return Channel feature This feature enables the audio signal of the TV to be sent to the AV amplifier via the HDMI cable It will not be necessary to connect a cable from the audio output of the TV to the audio input of the AV amplifier to reproduce the audio received from the tuner of the TV through the AV amplifier AV amplifier that supports ARC cdi HDMI cable CONNECTING YOUR TV REGZA LINK connection You can control the basic functions of connected audio video devices using the television s remote control if you connect a REGZA LINK compatible AV amplifier or playback device For an explanation of setup and operations see pages 75 76 Playback device OUT AV amplifier 2l the back of your television e Playback de
14. ToneBurst DiSEqC 2way or DiSEqC 4way as your satellite switch type e Press W to highlight LNB Power and press to select On or Off To add a transponder 1 In the Satellite Settings menu press A or V to highlight the line you want to edit and press OK ASTRA 19 2 E 1 2 Press the GREEN button The Transponder Settings screen will appear Transponder Settings Frequency Polarisation SymbolRate 5 52 10773 22000 10788 22000 10817 22000 10832 22000 10847 22000 10861 22000 10876 22000 Press A to highlight a new line Transponder Settings Frequency Polarisation Symbol Rate 5 52 76 12640 v 22000 77 12662 22000 78 12669 22000 79 12692 22000 80 12699 22000 81 12721 22000 12728 22000 82 SS n ees DNI Press e Edit each parameter as required and press OK See page 19 GEZEN To delete a transponder 1 In the Transponder Settings menu press A or V to highlight the line you want to delete Press the RED button To edit the Transponder Settings In the Transponder Settings menu press A or W to highlight the line you want to edit and press OK Press or P to select Frequency Polarisation Symbol Rate or 5 52 and set the item using the number buttons if necessary Press OK to save your settings Repeat steps 1 through 3 for other lines Press BLUE to finish editing and return to Satellite Settings Press GREEN to can
15. V 4 or P is pressed the highlight moves to linked areas 50 CONTROLS AND FEATURES To use the Drag Mode If you select Advanced Settings 1 Press A or V to select Pointer ON and press OK Press V P to select the setting items and press OK A check will appear in the box To remove Press the BLUE button the check press OK again 3 From the Function menu press or P to select e Press A V lt or P to select OK field and press OK Pointer and then press OK Item Description 4 Press A or V to select Drag Mode and press OK n Image Sets display non display of images Sy Will appeor Table Sets effect non effect of tables Press OK and then changes to 7 CSS Sets effect non effect of CSS Pop up Sets effect non effect of pop up windows Press V to move the selected item in the window desired place Animation Sets display non display of animations Switching the frame JavaScript Sets effect non effect of JavaScript Word wrap Sets effect non effect of Word Wrap If Word en From the Function menu press to select Menu Wrap is enabled a word not finished at the and then press OK end of a line is shifted to the next line Rapid Sets effect non effect of Rapid Render If Press or P to select Page Tasks Render Rapid Render is enabled texts and links are displayed first and the images and the Highlight Switch Frames
16. be grayed out and automatically set to Off 38 CONTROLS AND FEATURES Film Stabilization The Film Stabilization feature allows the adjustment of motion smoothness 1 In the Advanced Picture Settings menu press W to select Film Stabilization e Press or P to select High Middle Standard or Off NOTE When Picture Mode is set to AutoView the Film Stabilization feature will have an additional Auto mode When Picture Mode is set to Game this feature will be grayed out and automatically set to Standard Resetting the advanced picture settings This feature allows you to reset the current Advanced Picture Settings to the default values 1 In the Advanced Picture Settings menu press W to select Reset e Press OK Expert Picture Settings Test Pattern When the test pattern is on screen you can navigate in the Picture submenus and adjust picture settings without removing the image When you move to a non Picture menu or close the menus regular video will be restored In the PICTURE menu press A or V to select Expert Picture Settings and then press OK to display Expert Picture Settings menu e Press A or V to select Test Pattern Press P to select On Press EXIT to close RGB Filter This feature individually enables or disables the red green and blue components of the picture to allow for more accurate adjustment of each colour In the Expert Picture Sett
17. enter all zeros for the above setting Energy Saving Settings Automatic Power Down The TV will automatically turn itself off standby after 4 hours if you do not operate the TV either from the remote control or the TV control panel GD inthe PREFERENCES menu highlight Energy Saving Settings and press OK e Press A or V to select Automatic Power Down Press lt 4 or P to select On or Off and press NOTE This feature is set to On when Location is set to Home 1 minute before switching to standby a Warning message will appear When the following features are set the feature that is set for the nearest time will function Automatic Power Down Sleep Timer Photo Frame Auto Power Off Auto shutdown after 1 hour of inactivity after power on by On Timer No signal auto power off after 15 minute of no signal No Signal Power Down The TV will automatically turn itself off after 15 minutes when no signal is detected You can change the setting to Off for the following purposes Low signal strength of analog channel no signal detection Only Audio L R is connected to external input to listen to music through the TV speakers In the Energy Saving Settings menu highlight No Signal Power Down and press OK e Press A or V to highlight the item you want to change and press or P to select On or NOTE Default setting is all On A warning message will appear 1 minu
18. gt NS rere gt ES gt What else can cause a poor picture Interference or a weak signal Try a different television station Manual Fine Tuning may help Select the ATV Manual Tuning menu Highlight the station and press OK Then press to select Manual Fine Tuning Using A or V adjust to get the best picture and sound Press OK and then EXIT ATV Manual Tuning Manual Fine Tuning 1 1 CUT NEN o T Why don t the controls of the television work Check that Panel Lock is not On Why doesn t the remote control work Check that the mode switch on the remote control is in TV mode Check that the batteries aren t dead or inserted incorrectly Why is the digital channel locked The channel has been locked in Channel Options see Digital Settings section Why are some of the digital subscription channels unavailable Your subscription needs upgrading Contact your service provider Why is the soundtrack in English when a different audio language has been selected The programme is currently being broadcast with an English soundtrack only Why is there incorrect or no sound when in DTV mode Press CDI I to ensure the hard of hearing option has not been selected PROBLEM SOLVING DO gt O Om FO gt gt O gt O gt O gt O What is DVB T Digital Video Broadcast via an aerial antenna What is DVB C Digital Video Broadcast via a cable connection What
19. 2 E 2 19 2 E BBC 22 5 E BB 22 5 E BA 22 5 E AA 25 6 E 25 6 For your convenience you can edit and sort your channel list Line Number Jump Use the number buttons 0 9 to input the line number you want to select and then press OK Station Letter Jump Press 44 or PP to jump to the next station name with a different initial letter Satellite Jump Press or PPI to jump to the next channel on a different Satellite Renumber Same as Antenna Cable channels See page 24 Move Same as Antenna Cable channels See page 25 Sort Press the YELLOW button A confirmation window will appear Press or P to select Yes and press OK The Sort menu will appear Sort Group By Satellite Sorting Type Channel Number Preset Order Yes 25 SETTING UP YOUR TV Group Press or P to select All or By Satellite Sorting Type Press 4 or P to set the sorting type A Z Station name order A to Z Channel Number Position No order numerical sequence Preset Order Press or P to set Yes or No This item is displayed when Country is set to Germany and only applies to the Astra 19 2 E satellite Press W to highlight Sort and press OK Standby Channel Update If the Standby Channel Update is set to On when the TV is in standby mode Digital Tuning is automatically executed and any new channels are saved 1 Select DTV Settings from the SETUP
20. 3D Setup menu to enter PIN INSTALLING YOUR TV Notes on handling the 3D glasses liquid crystal shutter lenses Do not put excessive force on the lenses Do not scratch the surface of the lenses with sharp objects Do not drop or bend the 3D glasses Notes on IR communication Do not block the IR sensor for 3D glasses on the TV by placing objects in front of it Do not cover the IR sensor on the 3D glasses with stickers or labels Keep the IR sensor on the 3D glasses clean If the 3D glasses interfere with any other IR communication device or 3D TV the 3D glasses may not work correctly Also this TV may interfere with the operation of other IR communication devices Use the TV and 3D glasses in a place where they will not interfere with other devices or products Notes on watching the TV If you use any device such as a mobile phone or mobile wireless device near the 3D glasses the 3D glasses may not work correctly Use the product in the following temperature range otherwise the quality of the 3D image or the reliability of the product cannot be guaranteed 3D glasses 0 C 40 C 32 F 104 F TV 0 C 35 C 32 F 95 F If you use a fluorescent light it may flicker depending on the frequency of the light In this case reduce the brightness of the fluorescent light or use another light It is not recommended to watch the TV in a dark room especially for children
21. Info and press OK Switching left and right images The left and right eye shutter timing of the glasses can be swapped If 3D images look blurred switch the left and right sides of the 3D image D Press QUICK on the remote to open the Quick Menu e Press or V to select 3D Settings and press OK Press or to select Left and Right Image 4 Press or P to select Swapped CONTROLS AND FEATURES Sound controls Press W to highlight Sound Navi and then press Advanced Sound Settings Volume controls and sound mute Vol Surround Off a Voice Enhancement On Press to adjust the volume Dynamic Bass Boost Sound Mute Press RK once to turn the sound off and again to cancel Press or to select either Stand or Wall depending on how your is installed and then press the RED Dual button If a programme or film is being broadcast with a soundtrack in more than one language the DUAL feature allows selection Press lt or to select the frequency range you want to between them adjust from the equalizer window and then press or to adjust the level 1 Press MENU and lt or to select the SOUND menu Sound Navi 2 Press V to highlight Dual and then press lt or P to choose between Dual 1 or Dual 2 Equalizer SOUND Dual Balance 1K 3 3K 10K Hz 1 2 Level Advanced Sound Settings Dolby Volume Dynamic Range Control Audio Level Offset o Audio Descr
22. Manual Tuning and press OK to select SETUP Menu Language English Country Ant Cable Satellite Satellite Settings Auto Tuning ATV Manual Tuning Germany Use A or V to highlight the desired position We suggest Pos 0 for a media recorder ATV Manual Tuning Pos Channel Station oo d 10 c7 540 C22 C25 C28 C30 Different Channel numbers may be displayed Press OK to select If the channel chosen for the media recorder is set to skip Skip should be removed before storing Press P to select System and use or V to change if required ATV Manual Tuning System 1c q 0 Y Then press to select Search Press A or V to begin the search The search symbol will flash ATV Manual Tuning Search T 1 0 2 3o 22 Each signal will show on the television If it is not your media recorder press or V again to restart the search When your media recorder signal is found press to move along to Station Use A V and to put the required characters e g VCR ATV Manual Tuning Station 1 1 AC 2 qQ Press OK to save Repeat for each position you want to tune or press RETURN to return to the list of channels and select the next number to tune Press EXIT when you have finished PLEASE NOTE This television has direct channel entry if the channel numbers are known Select the ATV Manual Tuning screen in Step 3 Enter the Position number the Sy
23. Tuning DTV Settings Germany For DTV ATV Tuning A screen will appear warning that previous programmes and settings will be deleted Auto Tuning Previous settings will be lost Press EXIT for no change DTVand ATV Start Scan Use or P to select DTV and ATV DTV or ATV if available then highlight Start Scan and press OK to continue with the Auto Tuning NOTE If you have selected Others for the Country field in the SETUP menu and selected a tuning mode other than DTV choose the optimum ATV broadcasting system B G I D K or L The television will start to search for all available DTV and or ATV services You must allow the television to complete the search When the search is complete the Auto Tuning screen will display the services found SETTING UP YOUR TV For Satellite Tuning A screen will appear warning that previous programmes and settings will be deleted Auto Tuning Previous settings will be lost Press EXIT for no change Satellite All Search Option Free to Air Press or V to highlight Satellite and then press or P to select the desired satellite No 1 Sat No 4 Sat or All You can select Free to Air or All as the Search Option Highlight Start Scan and press OK to continue with the Auto Tuning When the search is complete the Auto Tuning screen will display the services found Use V or A to move through the list to sele
24. Tuning Progress Found DTV Tune ATV Tune 2 Waiting Channel C7 When the search is complete the television will automatically select position one The Auto Tuning screen will display the total number of services found Press or gt to view the DTV digital channel or ATV analogue channel lists Use A or W to move through the list to select a channel and then press OK to view In ATV mode some areas may receive duplicate stations There may not be a clear picture or the signal may be weak so the station order can be changed using ATV Manual Tuning REMEMBER Press TV at any time to select between ATV and DTV DTV Ant TV RADIO TEXT DTV Cable TV RADIO TEXT DTV Sat TV RADIO TEXT if available modes NOTE The time will be set automatically by transmission but can be advanced or decreased by using Local Time Setting in the DTV Settings screen Select Next and press OK The Satellite Settings screen will appear From this window you can add the satellites that you wish to tune and configure detailed settings for each one individually See Satellite Settings section on page 18 Satellite Settings Switch Type LNB Power No Satellite Dish LNB 1 asmamzE O a 0 3 4 Transponder 1 83 10743 MHz Dish Type Fixed Lower LOF MHz 9600 Upper LOF MHz 10600 Highlight Done and press OK 17 15 If your satellite dish is movable the following Positioning screen will
25. UP YOUR TV Startup Application Before switching on the television put your decoder and media recorder if applicable to Standby To set up the television use the buttons on the remote control as detailed on page 8 Quick Setup 1 Press the button The Menu Language screen will appear This screen will appear the first time that the television is switched on and each time Reset TV is selected Press A V lt to select the menu language and then press OK Highlight Country and lt or P to select The television is now set to tune the stations for your country Quick Setup Country Germany Primary Subtitle Language English Secondary Subtitle Language English Primary Audio Language English Secondary Audio Language English NOTE The following display menus will differ slightly according to the country you selected If there is not a country that you want to select in the list select Others Press OK and the Location screen will appear Location To use the TV for displaying in a store showroom please select Store Home mode is recommended for normal use Press to select Home or Store For normal home use select Home Press OK If Store is selected in step 5 a Store mode confirmation window will appear If you select Yes from that window the TV will proceed to the Auto Demo setup screen 16 Press OK and the TV Mounting screen will appear press or P to
26. Volume Press or P to select Low High or Off NOTE The Dolby Volume setting influences the Dynamic Range Control and Digital Audio Output settings If Dynamic Range Control is set to On this feature will be disabled Dynamic Range Control This feature allows control of audio compression for some digital TV programmes MPEG 1 and MPEG 2 audio programmes are not supported NOTE This feature is disabled when Dolby Volume is set to Low or High In the SOUND menu press V to highlight Dynamic Range Control Press or P to select On or Off Audio Level Offset Sometimes there can be large changes in volume when switching from a DTV 5 1ch to DTV 2ch an ATV channel or an external input Using the Audio Level Offset feature reduces these volume differences Set the volume level usually used when watching a DTV 5 1ch programme Tune to a channel which is DTV 2ch ATV or an external input In the SOUND menu press W to highlight Audio Level Offset and press OK 4 Press V to highlight an option and then use or gt 33 to adjust the volume level Audio Level Offset DTV 2ch NOTE The available item changes depending on the current input source For example while watching a DTV 2ch programme only DTV 2ch is available and the other two items are greyed out in the menu This allows you to easily adjust according to each condition When watching a DTV 5 1ch programme this feature
27. and press OK tables etc are displayed afterward The 9 highlight can be moved with the text and the Setting the view feature link displayed From the Function menu press or to select Menu Setting other features and then press OK 1 From the Function menu press or to select Menu Press or P to select View and then press OK P to select Settings Press A or V to select the desired item and press OK ress lt or P to selec ing Press A or W to select the desired item and press OK Press A or V to select the desired setting and press OK Press or V to select the desired setting and press Settings Display Normal Displays YouTube page with the Mode size as it is Just Fit Rendering Displays YouTube page at a size that has been adjusted to precisely fit the width of your TV Text Size Changes the font size of the screen Select from Largest Large Medium Small or Smallest NOTE This font size is effective only for the page Advanced See the next column Settings Page Displays the information of the page you are Information viewing Server Displays the server certification Certificates 51 CONTROLS AND FEATURES Item Settings Security When jumping from a protected page to an unprotected page the message is displayed when the check is applied to Notify of secure non secure page changes Apply the check to select SSL
28. appear Positioning Satellite ASTRA 19 2 E Transponder Goto 0 Go to Stored Position 1 83 10743 MHz H Step Size Posi Store Position Signal Level Press A or W to highlight Positioning and then press 4 or P to find the dish position with the strongest signal level Press or V to highlight Store Position and press OK to store the dish position Repeat steps 14 and 15 for the next satellite as needed If your satellite dish is not movable the Positioning screen will not appear Adjust the dish position manually for maximum Signal Level strength Highlight Done and press OK If the reception testing completes successfully the Auto Tuning startup screen will display Auto Tuning Satellite Start Scan Satellite ASTRA 19 2 E Free to Air Scan Option You can select Scan Option from Free to Air and All Press A or V to highlight Start Scan and then press OK The television will start to search for available DVB S channels The progress bar will indicate the scan status When the search is complete the Auto Tuning results screen will display the total number of services found Use A or V to move through the list to select a channel and then press OK to view PLEASE NOTE The Quick Setup menu can also be accessed at any time from the SETUP menu SETTING UP YOUR TV Ant Cable Satellite if available From this menu you can set the RF input configuration
29. appropriate device and then press OK Press V lt P to select the photo you want to copy from the USB storage device or DLNA CERTIFIED server to the TV s flash memory and then press OK Le Photo Select LIO d 06 36 Tue 26 Apr 1 54 E05265464 jpg 1920 x 1080 OK Select P Page RETURN Back Photo Edit Press A or V to select Photo Edit and then press OK e9 Press A or V to select Rotate or Delete Photo Edit Delete ORK Enter RETURN Back Set the following items as required Rotate Press OK to rotate the image 90 clockwise Delete Press OK A confirmation window will appear Press to select YES and then press OK Press RETURN 60 CONTROLS AND FEATURES Settings 1 Press or V to select Settings and then press OK Press W to select Clock Position or Auto Power Off Settings Position Left Auto Power Off Off OK Enter RETURN Back e Set the following items as required Clock Press to select Off Digital Clock Analogue Clock or Analogue Digital Position Press or P to select Left or Right Auto Power Off Press or P to select Off 00 30 01 00 02 00 04 00 06 00 or 12 00 If the Photo Frame window is left open the TV will automatically turn off after the set length of time maximum 12 hours Press RETURN Select Start and then press OK NOTE The clock display will only appea
30. back of your television Fail US D Te E t Mini D sub 15 pin connector M 3 N Audio cable for PC to television connection not supplied Computer RGB PC cable not supplied gt gt 1 4 Conversion adaptor if required not supplied To use a PC set the monitor output resolution on the PC before connecting it to the television For acceptable PC signal formats see page 84 To display the optimum picture use the PC setting feature see page 70 NOTE The PC audio input terminal on the television is shared with the HDMI 2 analogue audio input terminal see page 73 Some PC models cannot be connected to this television An adaptor is not needed for computers with a compatible mini D sub15 pin terminal Depending on the DVD s title and the specifications of the PC on which you are playing the DVD Video some scenes may be skipped or you may not be able to pause during multi angle scenes A band may appear at the edges of the screen or parts of the picture may be obscured This is due to scaling of the picture by the set it is not a malfunction When PC input mode is selected some of the television s features will be unavailable e g Colour System in the SETUP menu Some PC models may output unique signals that the tel
31. exit File Compatibility USB device See page 86 Content on DLNA CERTIFIED Server File format MPEG2 PS MPEG2 TS AVCHD MP4 Video MPEG2 PS PAL MPEG2 TS PAL MPEG2 PS NTSC 2 5 NTSC H 264 Audio LPCM 1 MPEG1 Layer2 MPEG2 Layer2 AC3 AAC Maximum number of files 1000 folder Some files may not be played To register your TV to a DivX account This TV allows you to play back files purchased or rented from DivX Video On Demand VOD services When you purchase or rent DivX VOD files on the internet you will be asked to enter a registration code inthe APPLICATIONS menu press to highlight Media Player and then press OK Press A or V to highlight DivX VOD and then press OK Press A or Y to highlight DivX VOD Registration and then press OK DivX VOD DivX VOD Registration The DivX VOD window will appear and you will see the registration code For details on registration please visit the DivX website at http vod divx com e Copy the activation file to a memory device and play it on the TV To deactivate your device 1 In step 3 above highlight DivX VOD Deactivation and then press OK A confirmation message will appear Select Yes and then press OK DivX VOD window will appear and you will see the deactivation code For details on registration please visit the DivX website at ht
32. glasses the battery or the accessories within the reach of small children Inhaling or swallowing them may cause suffocation or lesions in the stomach wall If swallowed consult a doctor immediately Do not repair modify or disassemble the 3D glasses by yourself Doing so may cause a fire or cause you to become indisposed while watching 3D images Contact the Toshiba Call Center for repair of your 3D glasses Do not expose the battery to excessive heat such as sunshine fire or the like About the 3D glasses Do not use the 3D glasses if they are not working properly or broken Continuing to use them in such a state may cause injury eye strain or indisposition Do not use the 3D glasses if they are broken or have any cracks Do not stand or walk while wearing 3D glasses You may lose your balance which could result in falls or other accidents Do not wear the 3D glasses for any purpose other than viewing 3D programming 3D glasses do not function as sunglasses Do not drop exert pressure on or step on the 3D glasses Doing so may damage the glass section which may result in injury Exposing the 3D glasses to liquid or excessive heat may damage the liquid crystal shutter function If your nose or temple turns red or you feel pain or discomfort stop using the 3D glasses Such symptoms as above may occur if you keep wearing them for a long time which may also cause indisposition Observe the
33. highlight Security Key and press OK Input the Security Key by using the Software Keyboard see page 47 To save your setting press the BLUE button NOTE This item is grayed out when Encryption is None Highlight Done and then press OK NOTE When Encryption is None a message will appear Press or P to select Yes and press OK NOTE Settings are not saved if RETURN is pressed before Done is selected Enhanced 11n When Enhanced 11n is set to On these features are available Dual Channel 40MHz GF Green Field NOTE In addition some other optional 11n features will be enabled 44 In the PREFERENCES menu highlight Network Setup and press OK Highlight Wireless Setup and press OK Press or V to highlight Enhanced 11n and then press or P to select On CONTROLS AND FEATURES Wireless Information The settings configured in Wireless Setup can be confirmed 1 Press QUICK to open the Quick Menu 2 Press A or V to select Wireless Information and press OK Quick Menu Picture Mode Picture Size 3D Settings More Information Channel Options AutoView Super Live YouTube Media Player Photo Frame Sleep Timer 00 00 Speakers TV Speakers Wireless Information When the AP connection succeeds a Wireless Information window will appear NOTE Press the RED button to scan for all available NOTE Even if an AP for IEEE 802 11n is used when Encryption is set to WEP or
34. is DVB S S2 Digital Video Broadcasting Satellite ETS EN300 421 and Digital Video Broadcasting Satellite ETS EN302 307 via a satellite dish How are radio channels selected Press TV on the remote control and select DTV RADIO Alternatively select from the GUIDE What can be done if the PIN number has been forgotten Use the Master PIN code of 1276 then change to a number of your choice Select PIN Setting from the DTV Setting menu to enter PIN Ensure that no one else can use the Master PIN by removing the Owner s Manual Why are there vertical stripes on the screen when in PC mode The Sampling Clock may need adjustment Select PC Settings from the Display Settings menu highlight Sampling Clock and adjust until the lines clear Why are there horizontal stripes and or blurred images on the screen when in PC mode The Clock Phase may need adjustment Select PC Settings from the Display Settings menu highlight Clock Phase and adjust until the picture clears Why when digital subtitles have been selected are they not showing on screen Subtitles are not currently being transmitted by the broadcaster Why is a page number visible at the top of the screen but no text Text has been selected but Teletext information is currently unavailable on the current source gt 5 _ gt n S gt 5 80 Why are there problems with analogue text Good performance of text depends on a good strong broadcast
35. is not available Audio Description Audio Description is an additional narrative sound track for visually impaired individuals to understand and enjoy the story line more fully The letters AD will be displayed in the channel banner when programmes contain AD content In the SOUND menu select Audio Description and press OK Highlight Audio Description and then press to select On Audio Description Audio Description Mixing Level The AD button on the Remote can also be used to toggle the Audio Description feature between On and Off To adjust the level of the audio description sound to the main sound highlight Mixing Level and use or CONTROLS AND FEATURES Widescreen viewing Depending on the type of broadcast being transmitted programmes can be viewed in a number of formats Use this setting when watching a widescreen DVD widescreen video tape ii j ad bond i hen available Due to the range o WIDE widescreen formats 16 9 14 9 20 9 etc black bars may be visible on the top and bottom of the screen Use this setting to view true 4 3 4 3 broadcast SUPER LIVE This setting will enlarge a 4 3 image to fit the screen by stretching the image horizontally and vertically holding better proportions at the centre of the image Some distortion may occur CINEMA When watching all sides panel format films video tapes this setting will eliminate or reduce
36. is recommended for Fixing strap Sturdy tie as short as possible comfortable viewing Use curtains or blinds to prevent direct sunlight falling on the screen Place the TV a stable level surface that can support the weight of the TV In order to prevent Injury and maintain stability of this apparatus secure the TV to the level surface using the strap if fitted or to a wall using a sturdy tie to the P clips provided The LCD display panels are manufactured using an extremely high level of precision technology however sometimes some parts of the screen may be missing picture elements or have luminous spots This is not a sign of a malfunction Fixing strap Stand style is dependent on model Make sure the television is located in a position where it cannot be pushed or hit by objects as pressure will break or damage the screen Also please be certain that small items cannot be inserted into slots or openings in the case Cleaning the screen and cabinet Turn off the power and clean the screen and cabinet with a soft dry cloth The enclosed cleaning cloth is for cabinet cleaning We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage When using a Wall Bracket Please use a wall bracket appropriate for the size and weight Removing the Pedestal Stand f the LCD TV 91228 2 R 1 Carefully lay the front of the unit face down on a flat
37. menu and press e Press W to select Standby Channel Update and use 4 or P to select On DVB Character Set This feature allows you to manually select the character set Standard Table 0 West Table 5 or Latin alphabet 9 to be used for DVB C or DVB T channels 1 Select DTV Settings from the SETUP menu and press Press W to select DVB Character Set and use or gt to select Standard West or Latin alphabet 9 Dynamic Scan If the broadcast information has changed in your DVB T receiving area the TV screen will display the message Broadcast information has changed Would you like to rescan now Please follow the message If you do not wish for the TV to detect changes and prompt you to rescan you should set this feature to Off ao Select DTV Settings from the SETUP menu and press Press W to select Dynamic Scan and use lt or to select On Location setting You can select either Home or Store mode Home is recommended for normal home use Select Store when using the television for displaying in a shop etc Select Location from the SETUP menu Press or P to select Home or Store Analogue switch off This is a digital television which is integrated to allow the use of both digital and analogue services However during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services This switch off will ha
38. mode settings as desired For example while selecting Dynamic if you change the following items such as Backlight Contrast Brightness Colour Tint Sharpness and the Advanced Picture Settings items your new settings are saved for Dynamic picture mode 1 In the PICTURE menu press W to select either Backlight Contrast Brightness Colour Tint or Sharpness and press OK Press lt or P to adjust the settings Reset This feature resets all picture settings to the factory settings except Picture Mode 1 In the PICTURE menu press W to select Reset and press OK A confirmation message will appear Press or select Yes and press OK Colour Master When ColourMaster is set to On it allows the Base Colour Adjustment feature to become available 1 In the PICTURE menu press W to select Advanced Picture Settings and press OK Press W to select ColourMaster Advanced Picture Settings ColourMaster Colour Temperature Auto Brightness Sensor Settings Active Backlight Control Black White Level Static Gamma Noise Reduction e Press or to select On or Off and then press OK 36 CONTROLS AND FEATURES Base Colour Adjustment The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference This can be useful when using an external source In the Advanced Picture Settings menu press W to select Base Colour Adjustment and
39. on Cancel EPG Update page 68 Media Player Multi Sort See page 55 View List View Interval Time See page 55 Repeat See page 55 Device Information See page 55 Wireless Information See page 45 Photo Frame PICTURE See page 36 27 CONTROLS AND FEATURES Using 3D functions Before using 3D programming see and follow When using the 3D glasses section on page 6 Viewing 3D programming requires the following TOSHIBA 3D Glasses FPT AGO1G supplied Compatible 3D playback device or 3D source 3D capable high quality HDMI cable Viewing 3D images Incoming video signals can either be in 2D or 3D format A 2D signal can only be viewed as 2D but 3D can be viewed in either 2D or 3D If the TV can detect the fact that a signal is 3D it can change to 3D mode automatically see 3D Auto Start below Otherwise the user can change the viewing mode using the 3D button Finally the format of the 3D signal can be either Side by Side SBS or Top and Bottom TB You may have to choose the correct format if the TV can not detect it automatically see 3D format select below NOTE When 3D format signal is not received display mode is not switched to 3D The 3D button is available in digital channels or HDMI input If appropriate mode and format are not selected 3D image is not correctly displayed There will be restrictions on the Picture Size settings for 3D Mode and 2D Mode There are in
40. only o Press to stop playback NOTE Depending on the file size it may take some time for playback to begin During playback you can adjust the SOUND menu functions from the QUICK Menu During playback Press IMI to pause To resume normal playback press PLAY P You can move to the desired replay position by pressing 4 or gt during PAUSE for DMS only PAUSE or operations during PAUSE may not be available depending on the content DMC or DMS To play in fast reverse or fast forward directions press 44 or PP Each time you press 44 or PP the playback speed will change To display the music list press the RED button for USB only To set the repeat mode amp p Press QUICK to open the Quick Menu Press P to select Off All or 1 Mode Description Off USB Files in the same folder are played back once DMS A file is played back once All Files in the same folder are repeatedly played back 1 The same file is repeatedly played back Press RETURN NOTE When the TV is used as a DMR this feature is not available To set the shuffle mode Press QUICK to open Quick Menu Press V to select Shuffle Press lt P to select On or Off To sort the folders and files 1 Press QUICK to open the Quick Menu in list mode e Press A or V to select Sort Press or P to select Title File Name New or Old to set th
41. select the desired device and press OK A check will appear in the box To remove the check press OK again e Press gt to highlight Done and then press OK to save NOTE Up to 8 DMSes can be selected Even if the device checked is powered off it will be displayed but grayed out in the Select Device window When OK is pressed on a highlighted grayed out item a confirmation of Wake on LAN is displayed The TV tries to wake up the DMS if Yes is pressed The Server will start if it supports Wake on LAN feature When some DMSs are connected it may take time until the list is displayed The list may be refreshed by the following operation The device selection window is closed once and it is displayed again The RED button is pressed Viewing photo files There are three types of viewing modes Multi View This view allows you to search for photos in a grid format The pictures are displayed using thumbnail data in each image file ep mf Folder 10 00 Fri 21 Feb 2010 1920x1080 E05265464 jpg DR Select QUICK Features Page RETURN Back The initial highlighted position will be on the top left thumbnail in the Multi View Press V lt P to move the highlight in one window If all of the photos will not fit in one screen when pressing at the top left thumbnail the screen will move to the previous page Conversely when pressing P at the bottom right thumbnail the screen will move to the ne
42. signal This normally requires a roof or loft aerial If the text is unreadable or garbled check the aerial Go to the main index page of the text service and look for the User Guide This will explain the basic operation of text in some detail If further information is needed on how to use text see the text section Why are the colours wrong when an NTSC source is played Connect the source via a SCART lead and play Select Colour System from the SETUP menu Set the Colour to Auto and exit Go to the PICTURE menu and adjust the tint Why don t the devices connected via HDMI operate properly Make sure to use cables with the HDMI logo Sams eaily HDMI equipment may not work properly with the latest HDMI TV products due to new standard adoption Try switching the HDMI settings Enable Content Type and INSTAPORT to Off Why don t the REGZA LINK devices work When the connected REGZA LINK device does not work correctly after you have changed the settings of the device turn off your television and unplug the power cord and then plug in and turn on again Unplug the HDMI cable of the REGZA LINK device and lead again Why is the REGZA LINK logo still showing when the equipment has been disconnected If the REGZA LINK device is disconnected the logo will disappear after approximately one minute Why don t the networked devices work The LAN cables are not connected properly or at all Connect all cables see page 1
43. the DMR 1 In the Media Renderer Setup menu highlight Web Password Setup and press OK Highlight the Password field and press OK The Software Keyboard window will appear e Change the password by using the Software Keyboard see page 47 and then press the BLUE button NOTE The Web Password can be up to 15 characters long Only the password can be changed User ID cannot be changed Highlight Done and then press OK NOTE Some DMCs can view or modify the device name of the DMR Depending on the TV s state it may not be possible to set the device name from the web page Review the owner s manual of the DMC to confirm the method for accessing web pages Media Controller Setup You can limit which DMC can control this TV If Access Control is enabled only those DMCs with a check will be allowed to control the TV en In the Media Renderer Setup menu highlight Media Controller Setup and press OK Press or to highlight Access Control and then press or P to select On Press or to highlight Select Media Controller and press OK Press A or V to highlight the item you want to accept and press OK A check will appear in the box To remove the check press OK again e Press gt to highlight Done and then press OK NOTE You can select up to 8 DMC devices If you would not like to limit the DMCs for this TV set Access Control to Off Devices other than DMCs may
44. the black bars at all sides of the screen by zooming in and selecting the image without distortion When subtitles are included on a letterbox format broadcast this SUBTITLE setting will raise the picture to ensure that all the text is displayed SUBTITLE Use this setting when watching a 14 9 14 9 broadcast 000 099 34 CONTROLS AND FEATURES This setting will show the picture NATIVE without overscan i e WYSIWYG This setting will show the picture without overscan i e WYSIWYG PC NORMAL This option is only available when watching a PC signal source via HDMI or PC terminal This setting will show the picture without overscan or side panels PC WIDE This option is only available when watching a PC signal source via HDMI or PC terminal Dot by Dot is a non scaling display Depending on the input sional formoi the picture is displayed with side Dot by Dot panels and or bars at the top and bottom e g VGA input source Press the F4 button on the Remote to display the list of available widescreen formats Press the button repeatedly to highlight the required format The Quick Menu feature can also be used to select Picture Size AV format PC format Picture Size Picture Size Native Dot by Dot Wide PC Normal 4 3 PC Wide Super Live Cinema Subtitle 14 9 Using the special functions to change the size of the displayed image i e changing the height width ratio for the pur
45. the previous layer To close the Media Player 1 Press EXIT Using the Media Player with a DLNA CERTIFIED Server You need to configure a home network before using this feature see page 14 inthe APPLICATIONS menu highlight Media Player and then press OK e9 Press A or V to select Photo Movie or Music and press OK The thumbnail for Photo or list of files for Movie and Music will appear NOTE If there is more than one media server on the network a list of all media servers will be displayed Highlight the server you want to use and press OK e Press A or V to select a DMS if the selection window is displayed 53 CONTROLS AND FEATURES To select a file in the list of contents Press or V to select a file or folder Press OK to move to the next layer or press RETURN to return to the previous layer To close the Media Player Gn Press EXIT To display the device information Gn Press QUICK to open the Quick Menu in list mode or Multi View mode e Press A or V to select Device Information Setting DLNA CERTIFIED Server waking up You only need to complete the Media Server Setup if you wish to use the Wake on LAN feature In the APPLICATIONS menu highlight Media Player and then press OK Press A or V to highlight Setup and press OK Press or to highlight Media Server Setup and press OK A list of currently available DMSs will appear Press A or V to
46. then press OK Press or V to select an option and then press to move to the adjustment window Base Colour Adjustment Hue Saturation Brightness LI Green L Blue Yellow Magenta _ Reset Press or P to select Hue Saturation or Brightness and then press A or W to adjust the settings as required Saturation Brightness 0 Press RETURN to return to the previous menu To return to the factory settings select Reset and press OK Colour Temperature Colour Temperature increases the warmth or coolness of the picture by increasing the red or blue tint In the Advanced Picture Settings menu press W to select Colour Temperature and press OK Press or P to adjust the level The adjustment range is 0 warm to 10 cool NOTE If Picture Mode is set to AutoView the adjustment range is 5 to 5 Auto Brightness Sensor Settings When the Auto Brightness Sensor is activated it will automatically optimise the backlighting levels to suit ambient 37 light conditions In the Advanced Picture Settings menu press V to select Auto Brightness Sensor Settings and press OK Press to select On and press OK Auto Brightness Sensor Settings Auto Brightness Sensor Backlight Adjustment Pro Press W to select Backlight Adjustment Pro and press OK The Backlight Adjustment Pro window will appear Press OK again to display the adjustment window Press
47. to highlight Auto Standby Press or P to select On Off When Amplifier Control is set to On it allows the Speaker Amplifier Control Preference feature to become available In the REGZA LINK Setup menu press V to highlight Amplifier Control Press or P to select On or Off Speaker Preference This feature allows the audio output preference to be set to the TV speakers or AV amplifier speakers The AV Amplifier option lets the television s remote control adjust or mute the volume of the audio In the REGZA LINK Setup menu press V to highlight Speaker Preference Press P to select TV Speakers or Amplifier REGZA LINK input source selection If a REGZA LINK device with HDMI switching capability e g AV amplifier is connected to the HDMI input you can select another REGZA LINK device that is connected to the master 75 HDMI device on the input source list Press and a list will appear on screen showing available input sources Press V to select the desired input source with REGZA LINK icon Press gt and a second selection screen will appear showing all connected REGZA LINK equipment Inputs 7 oo 2 VCR DVR 3 CBL SAT 4 GAME TV 5 AUX HDMI 3 HDMI 4 PC REGZAUNK d Press A or V to select the desired input source and then press OK CONTROLS AND FEATURES NOTE These functions depend on the device connected If you select the REGZA LINK i
48. to set for WEP encryption Highlight Done and then press OK NOTE If Network Name is not displayed see step 4 and 5 in Manual Setup below to set Network Name before pressing Done NOTE Settings are not saved if RETURN is pressed before Done is selected Manual Setup In the PREFERENCES menu highlight Network Setup and press OK Press A or V to highlight Wireless Setup and press OK Press A or V to highlight Manual Setup and press OK Press A or V to highlight Network Name and press OK The Software Keyboard window will appear D Input the Network Name by using the Software Keyboard see page 47 To save your setting press the BLUE button Press or to highlight Authentication and then press or P to select Open System Shared Key WPA PSK or WPA2 PSK Press or V to highlight Encryption and then press or to select None WEP TKIP or AES NOTE Certain encryption types are only compatible with specific authentication types When Authentication is Open System only WEP or None is compatible When Authentication is Shared Key only WEP is compatible When Authentication is WPA PSK or WPA2 PSK only TKIP or AES is compatible When incompatible Authentication Encryption pairings are detected a warning message will be displayed and no connection attempt will be made until the incompatibility is resolved There is only one key ID to set for WEP encryption Press A or V to
49. x 600 56 250Hz 35 156kHz 36 000MHz e 60 317Hz 37 879kHz 40 000MHz e 72 188Hz 48 077kHz 50 000MHz e 75 000Hz 46 875kHz 49 500MHz e XGA 1024 x 768 60 004Hz 48 363kHz 65 000MHz e 70 069Hz 56 476kHz 75 000MHz e 75 029Hz 60 023kHz 78 750MHz e WXGA 1280 x 768 59 995Hz 47 396kHz 68 250MHz e 59 870Hz 47 776kHz 79 500MHz e 74 893Hz 60 289kHz 102 250MHz e 1360 x 768 60 015Hz 47 712kHz 85 500MHz e SXGA 1280 x 1024 60 020Hz 63 981kHz 108 000MHz e 75 025Hz 79 976kHz 135 000MHz e 84 INFORMATION Acceptable video or PC signals through the HDMI terminals The HDMI inputs on this TV only accept VGA SVGA XGA WXGA and SXGA signal formats which are compliant with VESA as shown in the table below Since some PCs and HDMI or DVI devices input signals which are different from the resolution and frequency described in the table below the following phenomenon may occur incorrect display false format detection picture position failure blur or judder In this case set the monitor output format on your PC HDMI or DVI device to conform to a signal in the table below Format Resolution V Frequency H Frequency Pixel Clock Frequency VESA Standard 480i 720 x 480i 59 940 60 000Hz 15 734 15 750kHz 27 000 27 027MHz 576i 720 x 576i 50 000Hz 15 625kHz 27 000MHz 480p 720 x 480p 59 940 60 000Hz 31 469 31 500kHz 27 000 27 027MHz 576p 720 x 576p 50 000Hz 31 2
50. 1 Geo SCART SCART Adaptor cable 39 supplied Aerial Cable media recorder IN OUT Aerial cables Connect the aerial to the socket on the rear of the television If you use a decoder and or a media recorder it is essential that the aerial cable is connected through the decoder and or through the media recorder to the television F type Satellite cable Connect LNB from the satellite dish to the SATELLITE ANTENNA socket on the TV You can receive TV radio interactive TV and HD TV with clear reception SCART A Connect the media recorder IN OUT socket to the television Connect the decoder TV socket to the television Use the SCART Adaptor cable supplied Before running Auto Tuning put your decoder and media recorder to Standby COMPONENT VIDEO INPUT connection Use the COMPONENT Adaptor cable supplied The AUDIO terminals are shared with the VIDEO INPUT VIDEO INPUT connection Use the A V Adaptor cable or SCART AV Adaptor cable supplied The AUDIO terminals are shared with the COMPONENT INPUT The Digital Audio Output socket enables the connection of a suitable surround sound system NOTE this output is always active HDMI High Definition Multimedia Interface is for use with a DVD decoder or electrical equipment wi
51. 4 Make sure your network address is set up correctly see page 45 PROBLEM SOLVING Why doesn t the wireless network work Make sure the TOSHIBA Dual Band WLAN Adaptor is used see page 14 Check that the AP is powered on Why doesn t the Media Player feature operate Make sure that devices are connected correctly Incorrect behavior may occur with a USB hub connection Check your network setup if using DLNA CERTIFIED Server gt O FLO What do the LEDs on the front of the television indicate Q A Check the table below Q A Why doesn t the 3D feature operate correctly If 3D images are not correct the 3D format may be different change the 3D format from Quick menu If 2D images are not correct the 2D format may be different change the 2D format from Quick menu The left and right sides of 3D images may be reversed Switch the left and right Remove all obstructions between the 3D glasses and the TV Replace the 3D Glasses battery al LED 1 LED 2 LED 3 LED indication LED indication m E Condition Solution Condition Solution LED 3 LED 2 LED 1 LED 3 LED 2 LED 1 Orange Green Green Power ON Red Green Red Power ON Standby Solid Solid Solid On Timer is set _ Solid Solid Solid On Timer is set _ Progr
52. 50kHz 27 000MHz 1080i 1920 x 1080i 59 940 60 000Hz 33 716 33 750kHz 74 176 74 250MHz 1080i 1920 x 1080i 50 000Hz 28 125kHz 74 250MHz 720p 1280 x 720p 59 940 60 000Hz 44 955 45 000kHz 74 176 74 250MHz 720p 1280 x 720p 50 000Hz 37 500kHz 74 250MHz 1080p 1920 x 1080p 59 940 60 000Hz 67 433 67 500kHz 148 352 148 500MHz 1080p 1920 x 1080p 50 000Hz 56 250kHz 148 500MHz 1080p 1920 x 1080p 24 000Hz 27 000kHz 74 250MHz VGA 640 x 480 59 940 60 000Hz 31 469 31 500kHz 25 175 25 200MHz e 72 809Hz 37 861kHz 31 500MHz e 75 000Hz 37 500kHz 31 500MHz e SVGA 800 x 600 56 250Hz 35 156kHz 36 000MHz e 60 317Hz 37 879kHz 40 000MHz e 72 188Hz 48 077kHz 50 000MHz 75 000Hz 46 875kHz 49 500MHz e XGA 1024 x 768 60 004Hz 48 363kHz 65 000MHz e 70 069Hz 56 476kHz 75 000MHz e 75 029Hz 60 023kHz 78 750MHz e WXGA 1280 x 768 59 995Hz 47 396kHz 68 250MHz e 59 870Hz 47 776kHz 79 500MHz e 74 893Hz 60 289kHz 102 250MHz e 1360 x 768 60 015Hz 47 712kHz 85 500MHz e SXGA 1280 x 1024 60 020Hz 63 981kHz 108 000MHz e 75 025Hz 79 976kHz 135 000MHz e 85 INFORMATION USB Media Player Supported Format Photo Extension Format pg ipeg JPEG Data compatibility JPEG Exif ver 2 2 Maximum viewable resolution 4096 x 4096 HW decode pixels 16384 x 16384 SW decode pixels Maximum file size 9MB Maximum number of files 2000 folder Movie Extension System Video Codecs Audio Codecs mis m2ts AVCHD MPEG 2 TS
53. 9 ITV4 You can switch the time scale to 1 25 or 2 5 hours by pressing the GREEN button NOTE Channels are displayed in groups by service type TV Radio TEXT Pressing the TV button will switch the service type Press or P for information on other programmes scheduled for the channel selected To highlight the first programme in the genre grid press the RED button For details of other programmes currently available press and V to scroll up and down the channel list As channels are selected details of the programme currently being broadcast will appear Press to view information for future programmes 4 For information a highlighted programme press G3 e To set the timer for that programme press the BLUE button to bring up the Programme Timers menu NOTE In order for the recording operation to work properly the media recorder must be set to the same time as the TV Regarding the process for recording please refer to the owner s manual of the recording equipment Press Pv to advance to the next page or press PA to go back to the previous page Genre selection searching From the guide screen you can use the genre selection and search features amp D Press the QUICK button from the guide screen e Press A or V to highlight Genre Colour in the Quick Menu and then press OK Genre Colour Setup Movies I ColourSetup RETURN Back
54. A IEC 1 5V TOSHIBA 3D Glasses FPT AGO1G SCART Adaptor cable COMPONENT Adoptor cable AV Adaptor cable SCART AV Adaptor cable AV input only P Clip Cleaning cloth Tool set Four Spacers These spacers are to be used when mounting the TV to a wall bracket See page 5 Two cable clamps 3D capable high speed HDMI cable Specification is subject to change without notice TOSHIBA Television Central Europe Sp z All rights reserved Reproduction in whole or part without written permission is strictly prohibited TOSHIBA Television Central Europe Sp z o o ul Pokoju 1 Biskupice Podg rne 55 040 Kobierzyce Poland 88
55. AA IEC RO3 1 5V 10 To switch the Audio Description On Off S N Do not combine a used old 11 To return to previous programme position battery with a new one or mix 12 To alter the TV volume battery types Remove dead batteries immediately to prevent acid from leaking into the battery compartment Dispose of 13 Te display on screen information them in accordance with instructions on page 83 of this To access the index page in Text mode manual Warning batteries must not be exposed to excessive 14 To mute the sound heat such as sunshine fire or the like 15 To access Quick Menu The performance of the remote control will deteriorate beyond 16 To change programme positions a distance of five metres or outside an angle of 30 degrees To change TEXT pages from the centre of the television If the operating range becomes reduced the batteries may need replacing CONNECTING YOUR TV Connecting external equipment Before connecting any external equipment turn off all main power switches If there is no switch remove the mains plug from the wall socket ai LAN port gt gt COMPONENT VIDEO INPUT inu OS VIDEO INPUT OPTICAL DIGITAL AUDIO OUTPUT gt 94 1 PC HDMI2 AUDIO shared gt gt Qmo 2 HDMI INPUT SOCKETS POWER switch M POWER cord E FIXING STRAP HDMI m
56. DOLBy trademarks of Dolby Laboratories VOLUME H M HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC INSTAPORT and INSTAPORT logo are trademarks of Silicon Image Inc in the United States and other countries YouTube and the YouTube Logo are trademarks of Google Inc This product contains NetFront Browser of ACCESS CO LTD sz c ACCESS the ACCESS logo and NetFront are 55 trademarks or registered trademarks of ACCESS NetFront CO LTD in the United States Japan and other countries 2010 ACCESS CO LTD All rights reserved This software is based in part on the work of the Independent JPEG Group This product contains Adobe Flash Player software under license from Adobe Systems Incorporated Copyright 1995 2009 Adobe Systems Incorporated All rights reserved Adobe and Flash are trademarks of Adobe Systems Incorporated MPEG Layer 3 audio coding technology licensed from Fraunhofer IIS and Thomson DivX DivX Certified and associated logos are registered trademarks of DivX Inc and are used under license Covered by one or more of the following U S Patents 7 295 673 7 460 668 7 515 710 7 519 274 DVB is a registered trademark of the DVB Project DLNA DLNA Certification Logo and DLNA CERTIFIED are registered trademarks service marks or certification marks of the Digital Living Netwo
57. Media Player The WL76 YL76 series TV allows you to enjoy movie music and photo files stored on a USB device connected to the USB 1 port USB 2 provide access to photos only Moreover you can also play photos movies or music files from your PC by connecting the TV to your home network Terminology DMP DLNA CERTIFIED Player DMS DLNA CERTIFIED Server DMR DLNA CERTIFIED Renderer DMC DLNA CERTIFIED Controller DMP The TV can control and play content from a DMS ADMS is a device that can function as a server for DMP or DMR DMR The TV can play content from a DMS Playback is controlled by a DMC ADMC is a device that can instruct the TV to display content NOTE Do not insert remove USB device while in use MENU is not available during playback When you want to use your TV as a DMR set Media Renderer to On see Media Renderer on page 48 Media Player Specifications Device USB device Interface version USB2 0 HS USB Mass Storage Class devices MSC NOTE Connectivity is not guaranteed for all devices Incorrect behavior may occur with a USB hub connection File system FAT12 FAT16 and FAT32 NTFS Maximum memory size Unlimited DLNA CERTIFIED Server Your PC for example You must obtain any required permission from copyright owners to download or use copyrighted content TOSHIBA cannot and does not grant such permission CONTROLS AND FEATURES Bas
58. Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket Alternatively press the external source selection button until the picture from connected equipment is shown Input selection Use the Input Selection window if the television does not switch over automatically 1 By pressing lt on the remote control or TV a list will appear on screen showing all inputs and external equipment Pressing on the TV Pressing on the remote control Inputs DTV Ant or Cable TV DTV Ant or Cable RADIO DTV Ant or Cable TEXT DTV Sat TV DTV Sat RADIO DTV Sat TEXT Depends on the type of channels that are currently available for DTV HDMI displays equipment connected to Input HDMI on the back or side of the television PC displays a computer connected to Input RGB PC on the back of the television CONTROLS AND FEATURES External input skip This feature is designed to make input selection more convenient by allowing you to skip unused inputs inthe PREFERENCES menu press to highlight AV Connection e PREFERENCES Network Setup Media Renderer Setup Photo Frame Setup Teletext Network Lock Panel Lock Off Display Settings AV Connection M Press OK to display the AV Connection menu Press A or V to highlight Input Labeling and press OK AV Connection PC HDMI 2 Audio Side Shared Audio C
59. OK Press W to select MPEG NR Noise Reduction MPEG NR 4 Low gt Press or P to select Low Middle High or Off to suit your preference DNR Digital Noise Reduction DNR allows you to soften the screen representation of a weak signal to reduce the noise effect Select DNR from the Noise Reduction menu Use or to select Low Middle High Auto or Off The differences may not always be noticeable for the best result use lower settings as picture quality can be lost if the setting is too high Resolution The Resolution feature allows you to adjust the clarity levels for your desired picture settings In the Advanced Picture Settings menu press V to select Resolution and press OK inthe Resolution field select On Resolution Resolution NC Press W to highlight Level and then press to adjust the level NOTE This feature may not work properly depending on the content Adjustable range varies according to the Picture Mode you set Noise may appear in the picture depending on the device connected to the TV e g a device with a specific enhancer function Active Vision M200 Pro This feature will reduce picture blur without decreasing image brightness or adding flicker In the Advanced Picture Settings menu press V to select Active Vision M200 Pro Press to select On or Off NOTE When Picture Mode is set to Game this feature will
60. P to select Auto or Analogue AV Connection Input Labeling PC HDMI 2 Audio Side Shared Audio HDMI 2 Audio Colour Decoding Digital Audio Output If the sound is absent try selecting a different setting NOTE HDMI 2 supports digital and analogue sound HDMI 1 HDMI 3 and HDMI 4 are digital sound only Certain DVD disk formats may not output from this TV 32 44 1 48kHz and 16 20 24 bits are acceptable Side Shared Audio The AUDIO terminals for the COMPONENT VIDEO INPUT EXT 2 and VIDEO INPUT EXT 3 are shared Select an appropriate option EXT 2 or EXT 3 for the input that you are using inthe PREFERENCES menu press to highlight AV Connection and press OK Press A or V to highlight Side Shared Audio and then press or P to select EXT 2 or EXT 3 HDMI Settings Some early HDMI equipment may not work properly with your HDMI TV Please try setting the Enable Content Type and INSTAPORT options to Off Adjusting these settings should allow your early HDMI source to operate properly with your television GD inthe PREFERENCES menu press to highlight AV Connection and press OK amp Press A or V to highlight HDMI Settings and press OK NOTE HDMI Settings is grayed out on non HDMI inputs Press or V to select an item and then press to select a setting HDMI Settings Enable Content Type INSTAPORT RGB Range Enable Content Type On This feature is part of
61. ROLS AND FEATURES To select 3D format from the Quick menu in 3D To select 2D format from the Quick menu in 2D mode mode Press QUICK to display the Quick Menu Press QUICK to display the Quick Menu 3 Press or W to select 3D Settings and press OK e9 Press A or V to select 3D Settings and press OK e Press or V to select 3D Format Select and press Press W to select 2D Format Select and press OK OK Press or P to select Side by Side or Top and Bottom Press or P to select 2D SBS or 2D TB Trigger of Switching ick Trigger of Switching Display Mode Quick menu Display Mode Quick menu Input Signal 3D Fomat Select Input Signal 2D Fomat Select Type Additional Format Source SBS TB Type Additional Format Source SBS TB Native Info Signal Info Signal 3D With 3D FP Format Auto Detect Signal Information 3D With3D Format Auto Detect Signal Information xj ABS TB TB j um PES uto Detec uto Detec x Information TB ER Information TB 2D Format Signal DIS 2D Format Signal His m Correct 3D image Correct 2D image To switch to 2D mode NOTE Take off the 3D Glasses in 2D mode Set PREFERENCES 3D Setup 3D Auto Start to 2D itch to Native mode Press 3D while viewing 3D mode or Native mode To switch to Native mode
62. Scan On Using the number buttons enter a four digit number Once entered you will be prompted to confirm by entering again The PIN number is now set If the PIN code has been set when Auto Tuning and Reset TV are executed entering the PIN will be necessary REGZA LINK Setup Network Setup Media Renderer Setup Photo Frame Setup Teletext Network Lock Panel Lock e9 Enter your four digit PIN code e Press or P to select On and then press OK To unlock the Network 1 Select Off in step 3 above 66 CONTROLS AND FEATURES Digital settings Channel Options Selecting favourite channels Favourite Channels creates a list of the digital channels that are watched most Four lists can be created they can be a mixture of television radio and text channels Select a channel you want to add to your favourite list Press QUICK to open the Quick Menu Press V to select Channel Options and press OK Press repeatedly to select the favourite list Fav 1 4 Channel Options Press OK to select the ones required A tick will appear in the box as they are selected Repeat steps 1 through 5 for other channels og When all favourites have been selected press EXIT Favourite Channel Lists Press LIST to display Channel List Press or P to select Favourites 1 4 The number of favourites available depends on how many lists have been created Channel List Favourite
63. TKIP the Speed value might be low It is recommended that Encryption be changed to AES see Manual Setup on see page 44 Notes on wireless LAN environment The function of all IEEE802 11 is not supported The ad hoc mode is not supported t is recommended to use IEEE 802 114 or IEEE 802 11n on 5 GHz for audio and SD video streaming It is recommended to use IEEE 802 11n on 5 GHz for HD video streaming t is recommended that the encoding rate for streaming video content is 20 Mbps or less It is not recommended to use 2 4 GHz for audio and video streaming Content playback may be interrupted by various surrounding interference Advanced Network Setup NOTE When the DHCP function of the router connected with this TV is On you can set Auto Setup to On or Off This should usually be set to On When the DHCP function of the router is Off set Auto Setup to Off and set the IP Address manually IP Address Setup Auto Setup In the PREFERENCES menu highlight Network Setup and press OK Press or V to highlight Advanced Network Setup and press OK APs Description Status Connected is displayed when the TV is connected with the AP Disconnected is displayed when the TV is not connected with the AP Signal Connection signal strength with AP STRONG MEDIUM WEAK Speed Link with AP Mode Working mode 11a 11b 11g 11n Channel Channel in use 1 165 Netwo
64. TOSHIBA Leading Innovation gt gt gt WL76 Digital Series YL76 Digital Series REGZA i Contents INSTALLING YOUR TV Safety Precautions 4 Installation and important information 5 The remote control 8 Inserting batteries and effective range 8 CONNECTING YOUR TV Connecting external equipment 9 Bundling the cables 10 Connecting an HDMI or DVI device to the HDMI put enone uei i e Ese Pate 11 To connect an HDMI device 11 To connect a DVI device 11 HDMI s ARC Audio Return Channel feature Me RES 11 REGZA LINK connection 12 Connecting a computer 13 To connect a PC to the RGB PC terminal 13 To connect a PC to the HDMI terminal 13 Connecting a home network 14 To connect the TV to a home network IM 14 To connect the TV to a home network with an internet connection Wireless 14 Controls and input connections 15 Switching on esse 15 Using the remote control 15 Using the controls and connections SETTING UP YOUR TV Startup Application Quick Setup rine rie or eorr es 16 Ant Cable Satellite if available 18 Satellite Settings
65. TV screen as a digital photo frame One image pre installed or user installed can be displayed Date info can also be superimposed if desired You can overwrite the photo file with a file from a USB storage device or DLNA CERTIFIED Server To open Photo Frame Open from Menu 1 Press MENU and to select the PREFERENCES menu e9 Press V to select Photo Frame Setup and then press OK PREFERENCES 3D Setup REGZA LINK Setup Network Setup Media Renderer Setup Photo Frame Setup Teletext Auto Panel Lock off The preview screen will appear Photo Frame Setup TOSHIBA Leading Innovation gt gt gt Photo Select Photo Edit Settings Enter RETURN Back 59 CONTROLS AND FEATURES Press P to select Start and then press OK to open Photo Frame TOSHIBA Leading Innovation gt gt gt To open from the Quick Menu an Press QUICK to open the Quick Menu Press V to select Photo Frame and then press OK to open Photo Frame To close Photo Frame Press exit Setting the features In the preview screen you can set various settings for Photo Frame Photo Select 1 In the Photo Frame Setup menu press A or W to select Photo Select and then press OK Photo Frame Setup TOSHIBA Leading Innovation gt gt gt Photo Edit Settings Start Enter RETURN Back If the device selection screen appears press A or V to select the
66. Timer Lock Setting Enable 3D Timer Displaying 3D Important Info Switching left and right images Sound coritrols reo renes tren Volume controls and sound mute is Sons Aye Ei oux esa Balac Me Sound es Rent Surround Settings Dolby Volume Dynamic Range Control Audio Level Offset Audio Description Widescreen viewing eee Picture controls ve Pict re Mode rssi Picture preferences Reset deseri sae A REC OA Colour Master scs vv XE Base Colour Adjustment Colour Temperature Auto Brightness Sensor Settings 37 Active Backlight Control 38 Black White Level 38 Static Gamma 38 MPEG NR Noise Reduction 38 DNR Digital Noise Reduction 38 Resolutions to reote eee ce 38 Active Vision M200 Pro 38 Film Stabilization Resetting the advanced picture settings 39 Expert Picture Settings 39 Control Visualization
67. V to highlight DNS Setup and press OK Highlight Auto Setup and then press or P to select Off DNS Setup Auto Setup Off Primary DNS Address 133 177 108 Secondary DNS Address 255 255 Press or V to highlight Primary DNS Address Press to highlight the field you want to change and then use the number buttons to input the Primary DNS Address To save the setting press OK NOTE DNS address field numbers must be between 0 and 255 If you input an incompatible number and press OK the field number will reset to the previous value 46 CONTROLS AND FEATURES Press A or W to highlight Secondary DNS Address and edit in the same way as Primary DNS Address MAC Address You can view the fixed MAC address for the TV and for the Dual Band WLAN Adaptor if one is installed inthe PREFERENCES menu highlight Network Setup and press OK Press A or W to highlight Advanced Network Setup and press OK ED Press A or V to highlight MAC Address and press OK Network Connection Test This function checks the Internet connectivity inthe PREFERENCES menu highlight Network Setup and press OK Press A or W to highlight Network Connection Test and press OK A message will appear to indicate if the connection was successful or if it could not be completed NOTE The result of Network Connection Test does not always guarantee the connection Depending on the situation YouTube ma
68. Wear the 3D glasses properly otherwise you may not see the correct 3D image When not viewing 3D images on this unit take off the 3D glasses otherwise it may be difficult to see the display on other products such as PC digital clock or calculator etc About the connecting cable Use a high speed and high quality HDMI cable when you connect a device such as 3D compatible BD player or PC to the TV When you use a standard HDMI cable 3D images may not be shown About the lithium battery There is danger of explosion if the battery is incorrectly replaced Replace only with the same or equivalent type Please take note The digital reception function of this television is only effective in the countries listed in the Country section of the SETUP menu Depending on country area some of this television s functions may not be available Reception of future additional or modified services can not be guaranteed with this television If stationary images generated by 4 3 broadcasts text services channel identification logos computer displays video games on screen menus etc are left on the television screen for any length of time they could become conspicuous It is always advisable to reduce both the brightness and contrast settings Very long continuous use of the 4 3 picture on a 16 9 screen may result in some retention of the image at the 4 3 outlines This is not a defect of the LCD TV and is not covered und
69. al negative consequences for the environment and human health For more detailed information about the collection and recycling programmes available in your country please contact your local city office or the shop where you purchased the product INFORMATION Information Before connecting any external equipment turn off all main power switches If there is no switch remove the mains plug from the wall socket Signal information for Mini D sub 15 pin connector Pin No Signal name Pin No Signal name Pin No Signal name 1 R 6 Ground 11 2 7 Ground 12 NC 3 B 8 Ground 13 H sync 4 NC 9 NC 14 V sync 5 Ground 10 Ground 15 NC NC not connected Acceptable PC signals through the PC terminal The PC input on this TV only accepts signal formats which are compliant with VESA DMT as shown in the table below Since some PCs input signals which are different from the resolution and frequency described in the table below the following phenomenon may occur incorrect display false format detection picture position failure blur or judder In this case set the monitor output format on your PC to conform to a signal in the table below Format Resolution V Frequency H Frequency Pixel Clock Frequency VESA Standard DMT VGA 640 x 480 59 940Hz 31 469kHz 25 175MHz e 72 809Hz 37 861kHz 31 500MHz e 75 000Hz 37 500kHz 31 500MHz e SVGA 800
70. al quality centre frequency modulation etc 1 In the SETUP menu press A or V until System Information is highlighted Press OK to display the System Information System Information TOSHIBA 2010 2 1 26 0 Feb 19 2010 15 56 50 FW 13 WEAK AVERAGE STRONG Ch25 Good e For information about the signal quality of a particular multiplex press or V to select that multiplex 4 Press OK for a screen showing detailed technical information about the selected multiplex Reset TV Selecting Reset TV will reset all TV settings including saved channels to their original factory values 1 In the SETUP menu press V until Reset TV is highlighted 2 Press OK to select A screen will appear warning that all settings will be lost Press OK to continue When the set powers back on the Quick Setup screen will appear Press OK to advance the setup and perform an auto tune See Quick Setup section on page 16 PC Settings Horizontal and Vertical Position Connect the PC as shown in the Connecting a computer section and ensure that a picture is showing on the television screen The picture position may now be adjusted to suit personal preference 1 In the PREFERENCES menu press or V to highlight Display Settings and press OK In the Display Settings menu press W until PC Settings is highlighted Display Settings Auto Format 4 3 Stretch Press OK Press
71. amme Timer is Programme Timer is set active Red Green Green Power ON OFF Green Red Power OFF Standby Solid Solid Solid On Timer is set _ Solid Solid On Timer is set E Programme Timer is Programme Timer is active NOT set OFF Green Green Power ON Orange OFF Red Power OFF Standby Solid Solid On Timer is set _ Solid Solid On Timer is NOT set z Programme Timer is Programme Timer is NOT set set Orange OFF Green Power ON Red OFF Red Power ON Standby Solid Solid On Timer is NOT set Solid Solid On Timer is NOT set Programme Timer is 7 Programme Timer is set active Red OFF Green Power ON OFF OFF Red Power OFF Standby Solid Solid On Timer is NOT set Solid On Timer is NOT set Programme Timer is Programme Timer is 7 active NOT set OFF OFF Green Power ON OFF OFF Green Abnormal operation Turn OFF the TV Solid On Timer is NOT set _ Blinks of BUS line and unplug the Programme Timer is OFF OFF Red Abnormal operation power cord Plug NOT set Blinks of WDT the power cord in Orange Green Red Power OFF Standby OFF Green OFF Fan stopped again and turn pped Solid Solid Solid On Timer isset _ Blinks if applicable ON the TV Programme Timer is set INFORMATION License Information DODOLBY Manufactured under license from Dolby oiciTaL PLUS Laboratories Dolby and the double D symbol are registered CO
72. ammes according to their rating levels If a PIN has been set you will need to enter it before adjusting the level In order to prevent viewing of unsuitable films and programmes channels and menus can be locked in digital mode They can then only be accessed with a security code PIN 1 In the DTV Settings menu press W to select Parental Control and then press OK Use to choose an option None or an age setting 4 17 or 4 18 depending on the Country setting Setting the PIN an Press MENU and P to select the SETUP menu Parental Control Use W to select DTV Settings and then press Parental Setup 4 None To view blocked programmes enter the PIN To reactivate the Parental Control turn the TV off and then on again SETUP Menu Language Country Ant Cable Satellite Satellite Settings English Germany Network Lock You can use the Network Lock feature to prevent the Web browser from launching When this feature is set to On PIN input will be necessary to use YouTube Auto Tuning DTV Manual Tuning DTV Settings Press W to highlight PIN Setting and then press OK This feature will be grayed out until a PIN is set inthe PREFERENCES menu highlight Network Lock and press OK DTV Settings Channels Subtitle and Audio PREFERENCES 3D Setup Local Time Setting Standby Channel Update Off DVB Character Set Dynamic
73. ance or even lose your network connection If you should experience any such problem immediately turn off either your Bluetooth or Wireless LAN device Actual performance can vary including lower wireless network capacity data throughput rate range and coverage Performance depends on many factors conditions and variables including distance from the access point volume of network traffic building materials and construction operating system used mix of wireless products used interference and other adverse conditions Wireless LAN and your Health Wireless LAN products like other radio devices emit radio frequency electromagnetic energy The level of energy emitted by Wireless LAN devices however is far less than the electromagnetic energy emitted by wireless devices such as mobile phones Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations TOSHIBA believes Wireless LAN is safe for use by consumers These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature In some situations or environments the use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organization Such restrictions may apply in environments where the risk of inte
74. and V to select an option then lt 4 to adjust the settings PC Settings Horizontal Position I Vertical Position Clock Phase Sampling Clock Clock Phase The Clock Phase matches the PC signal with the LCD display Adjusting this can clear horizontal stripes and picture blur 1 In the Display Settings menu press V until PC Settings is highlighted Press OK to select and then to highlight Clock Phase Use or P to adjust until the picture clears 70 CONTROLS AND FEATURES Sampling Clock Adjusting the Sampling Clock alters the number of pulses per scan this will clear vertical lines on the screen In the Display Settings menu press V until PC Settings is highlighted Press OK to select and then V to highlight Sampling Clock Use or gt to adjust until the picture clears Reset Use Reset to return all items to the original factory settings In the Display Settings menu press V until PC Settings is highlighted Press OK to select and then V to highlight Reset Press OK NOTE When a PC is connected using HDMI none of these functions will be available The screen is disrupted momentarily when adjusting PC Settings This is not a sign of malfunction The default settings and adjustment ranges may vary depending on the input signal format 71 Input selection AV connections See page 9 for a detailed image showing recommended connections
75. anguage To set the repeat mode Press QUICK to open the Quick Menu Press P to select Off All or 1 Mode Description Off The file is played back only once All Files in the same folder are repeatedly played back 1 The same file is repeatedly played back Press RETURN NOTE When the TV is used as a DMR this feature is not available 56 CONTROLS AND FEATURES To sort the folders and files 1 Press QUICK to open the Quick Menu in list mode Press A or V to select Sort Press or P to select Title File Name New or Old to set the sorting rule Item Description Title DMS File sorting rules 1 Unicode priority 2 0 1 9 capital alphabet A B 2 small alphabet a b 2 3 Increasing order File Name File sorting rules USB 1 Unicode priority 2 0 1 9 alphabet A B 2 3 Increasing order New From new to old according to the date and time when the contents were updated Old From old to new according to the date and time when the contents were updated NOTE Sorting may not be supported by some DMSs To display the device information GD Press QUICK to open the Quick Menu in list mode Press or V to select Device Information NOTE When the movies on the USB device are used or the TV is used as a DMR this feature is not available To close the Movie Viewer Press
76. ashes will be displayed as and when they are broadcast Remember to cancel text before changing channels press the TEXT button twice 78 PROBLEM SOLVING Questions and Answers Below are the answers to some of the most common queries Q Why is there no sound or picture Check the television is not in standby mode Check the mains plug and all mains connections There is a picture but why is there little or no colour Q A When using an external source for instance a poor quality video tape if there is little or no colour improvements may sometimes be achieved The colour is factory set to Auto to automatically display the best colour system To check that you have the best colour 1 With the external source playing select Colour System from the SETUP menu I I DO SETUP _ Language Country Colour System lt English Germany Auto gt With lt P choose between Auto PAL SECAM NTSC 4 43 or NTSC 3 58 Why doesn t the video DVD being played show on screen Make sure the media recorder or DVD player is connected to the television as shown on page 9 and then select the correct input by pressing Q Why is there a picture but no sound Check all lead connections No sound or unacceptable format sound may be received Check the volume has not been turned down or that sound mute has not been selected Check shared audio settings 79 8 OQ o
77. be displayed in the list Confirm the MAC address of the DMC and set it 49 Maximum Volume Setup This feature allows you to set the maximum volume of the TV when it receives volume operation commands from a DMC In the Media Renderer Setup menu highlight Maximum Volume Setup and press or P to adjust to the desired volume NOTE The TV s remote control can set volume regardless of the value of Maximum Volume Setup When DMR playback ends the TV volume will return to the value in effect when DMR playback was started CONTROLS AND FEATURES Using YouTube YouTube is a video sharing service managed by YouTube LLC This TV allows you to view YouTube content NOTE You need to configure a home network before using this feature see page 14 If Network Lock is set to On it will be necessary to enter your four digit PIN code in order to access network features see page 66 inthe APPLICATIONS menu highlight YouTube and press OK APPLICATIONS Media Player Programme Timers On Timer Sleep Timer Press A V 4orP to select the file you want to view and press OK To close YouTube Press exit NOTE This TV may not be able to perform all of the same operations as a computer Depending on the network environment and use case you may experience difficulty viewing content Though the same volume value actual volume might be greatly different depending on contents
78. cel any edits that were made this time Press YELLOW to reset all transponder settings to their initial default settings 19 SETTING UP YOUR TV To select the Dish Type In the Satellite Settings menu press A or V to highlight the required satellite line and then press OK Press or highlight Dish and then press the GREEN button Dish Settings Dish 1 Fixed Dish Type Press to select Dish Type You can select Movable or Fixed as the Dish Type To select the LNB Settings In the Satellite Settings menu press A or V to highlight the required satellite line and then press OK Press or highlight LNB and then press the GREEN button LNB Settings LNB 1 Lower LOF 9750 Upper LOF 10600 Press A or V to select Lower LOF or Upper LOF and input the appropriate frequencies Auto Tuning NOTE As new services are broadcast it will be necessary to re tune the television in order to view them Auto Tuning will completely re tune the television and can be used to update the channel list It is recommended that Auto Tuning is run periodically to ensure that all new services are added All current channels and settings i e locked channels will be lost 1 Press MENU and use or to select SETUP menu 20 Use W to highlight Auto Tuning Press OK SETUP Menu Language English Country Ant Cable Satellite Satellite Settings ATV Manual Tuning DTV Manual
79. ct a channel and then press OK to view 21 ATV Manual Tuning Tuning The television can be tuned in manually using ATV Manual Tuning For example you might use the feature if the television cannot be connected to a media recorder decoder with a SCART lead or when you want to tune in a station on another System Use and move across the screen and select any of the ATV Manual Tuning options Then use A or V to adjust the settings ATV Manual Tuning 1234567 8 9 1 Position The number to be pressed on the remote control to tune the channel 2 System Specific to certain areas 3 Colour System Factory set to Auto should only be changed if problems are experienced i e NTSC input from external source 4 Skip Set Skip to On gt or Off e for the selected channel See page 22 5 Signal Class The channel classification 6 Channel The channel number on which a station is being broadcast 7 Search Search up and down for a signal 8 Manual Fine Tuning Only used if interference weak signal is experienced See page 79 9 Station Station identification Use or W and buttons to enter up to seven characters To allocate a position on the television for a decoder and media recorder turn the decoder on insert a pre recorded film in the media recorder press PLAY and then manually tune SETTING UP YOUR 1 Press MENU and use or P to select the SETUP menu Press V to highlight ATV
80. d Bilingual transmissions For ATV programmes If stereo or dual language broadcasts are transmitted the word Stereo or Dual will appear on the screen each time positions are changed disappearing after a few seconds If the broadcast is not in stereo the word Mono will appear Stereo Press CDI I to select Stereo or Mono Mode Quick menu item Description Bilingual Bilingual transmissions are rare If they are e transmitted the word Dual will be displayed Choose the When viewing a TV Picture Mode See page 36 required programme number and if the word Dual appears programme Picture Size See page 34 press to select Dual 1 Dual 2 or Mono pictures from the external input 3D Settings See page 28 For DTV programmes Single Window or More Information See page 64 For stereo or dual mono broadcasts press CDI I and use 3D Single Window Channel Options See page 67 P to select settings YouTube See page 50 Mode Display Pressing gt Media Player See page 52 Stereo Stereo Left Right Photo Frame See page 59 Dual mono Dual 1 Dual 2 Sleep Timer See page 63 CO Mono E Speakers See page 75 CD Multichannel Wireless Information See page 45 When using EPG Genre Colour See page 65 For multi audio track broadcasts press I II repeatedly to EPG Update See page 65 change the audio language see Audio language
81. ding option may be set to ensure the colourimetry reproduction NOTE The modes excluding Auto BT601 and BT709 are to convert an irregular signal output from the DVD etc with incorrect colour to the optimum state If BT601 or BT709 is selected with a normal signal received the colour may not be correctly displayed This feature should normally be set to Auto inthe PREFERENCES menu press W to highlight AV Connection and press OK Press W to highlight Colour Decoding and then press to select Auto BT601 or BT709 72 CONTROLS AND FEATURES PC Audio In order to receive sound from a connected PC plug the audio cable into the back of the television as shown in the Connecting a computer section and then use the PC HDMI 2 Audio setting GD inthe PREFERENCES menu press to highlight AV Connection and press OK Press A or Y to highlight PC HDMI 2 Audio and then press to select the PC option NOTE Selecting the PC option will force HDMI 2 Audio to Digital mode HDMI 2 Audio If the connected HDMI source does not support digital audio plug the audio cable into PC HDMI 2 AUDIO on the back of the television as shown in the Connecting an HDMI or DVI device to the HDMI input section then use the HDMI 2 Audio setting inthe PREFERENCE menu press to highlight AV Connection and press OK Press A or V to highlight HDMI 2 Audio and then press or
82. dividual differences in perception of 3D images When viewing 3D images wear the 3D Glasses Switching display mode or selecting 3D format There are three modes for watching TV Mode Description 3D Displays 3D images 2D Changes 3D images to 2D Native Displays a received signal format as it is 3D format select If a right and left images are same in Native mode select SBS If a top and bottom images are same in Native mode select TB 3D formats are the following 3D format Description Side by Images for the left and right eyes are Side SBS positioned side by side Top and Images for the left and right eyes are Bottom TB positioned at the top and bottom of the screen Frame Image for eyes of right and left for Packing two frames are positioned at the top FP and bottom of the screen This format cannot be selected manually To switch to 3D mode Set PREFERENCES 3D Setup 3D Auto Start to 3D Press 3D while viewing 2D mode or Native mode Trigger of Switching Display Mode Input Signal buiton Type Additional Format Source Info Signal 3D With 3D Auto FP 3D Format Detect Ey Signal Information SBS T Without 3D SBS E 1 3D Auto Detect oo E Information TB tm 2D Format Signal Correct 3D image 28 CONT
83. e sorting rule Description Title DMS File sorting rules 1 Unicode priority 2 0 1 9 capital alphabet A B 2 small alphabet a b 2 3 Increasing order File Name File sorting rules USB 1 Unicode priority 2 0 1 9 alphabet A B 2 3 Increasing order New From new to old according to the date and time when the contents were updated Old From old to new according to the date and time when the contents were updated NOTE Sorting may not be supported by some DMSs 58 CONTROLS AND FEATURES To display the device information 1 Press QUICK to open the Quick Menu in list mode e9 Press A or V to select Device Information NOTE When the music files on the USB device are used or the TV is used as a DMR this feature is not available To display the file status information an Press during playback The information will be displayed on the bottom of the screen again to remove the information NOTE The information may not be correctly displayed depending on the content DMC or DMS To close the Music Player aD Press EXIT File Compatibility USB device See page 86 Content DLNA CERTIFIED Server File format Linear PCM MP3 Sampling frequency 32 kHz 44 1 kHz 48 kHz Bit rate from 32 to 320 kbps Maximum number of files 1000 folder Using the Photo Frame feature You can use the
84. er the manvfacturer s warranty Regular use of other size modes eg Super Live will prevent permanent retention EXCLUSION CLAUSE Toshiba shall under no circumstances be liable for loss and or damage to the product caused by fire earthquake accidental damage intentional misuse of the product use of the product in improper conditions loss and or damage caused to the product whilst in the possession of a third party i any damage or loss caused as a result of the owner s failure and or neglect to follow the instructions set out in the owner s manual viii any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment Furthermore under no circumstances shall Toshiba be liable for any consequential loss and or damage including but not limited to the following loss of profit interruption of business the loss of recorded data whether caused during normal operation or misuse of the product NOTE A Toshiba wall bracket or stand where available must be used INSTALLING YOUR TV The remote control 17 To display the digital on screen Programme Guide Simple at a glance reference of your remote 18 To exit menus control 19 AY To page up down left or right 20 When using menus the arrows move the cursor on the screen up down left or right Press OK to confirm your selection 2 21 On screen Menus 3 22 To return to previous Menu 6 23 C
85. erver Data compatibility JPEG EXIF Ver 1 x or later JFIF 1 02a File format JPEG Maximum photo resolution 4096 x 4096 Maximum photo size 6 MB Maximum number of files 2000 folder 55 CONTROLS AND FEATURES Viewing movie files on a DLNA CERTIFIED Server or USB device You can select movies from a list of available files Movie list example _4 Movie D Sort Title 216 mi Folder Total Time WWWWWWWWW 00 00 00 is v 00 00 00 00 00 00 OK Play QUICK Features Page RETURN Back an Press V to selecta file or folder P Pv buttons can be used to page up down the movie list when there are more files than will fit onto one screen When you select a folder press OK to move to the next layer Press RETURN to move back to the previous layer With the desired file selected press OK or PLAY P to start playback NOTE On preview screen if you highlight the file without pressing OK the content is played on a preview screen When OK is pressed it is played in full screen mode Depending on the file size it may take some time to start playback 4 Press to stop playback NOTE If playback finishes before is pressed the screen will return to the list of available file Depending on the file size it may take some time for playback to begin About the AVCHD folder structure If a PRIVATE folder exists directly under the root folder on
86. es depending on the DTV input Antenna Cable or Satellite that is currently selected Manual Tuning This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known 1 Select DTV Manual Tuning from the SETUP menu and press OK DTV Manual Tuning WEAK AVERAGE STRONG Signal Strength Quality 1775 Start Scan e9 Enter the multiplex number using the number buttons or use or P to adjust the number up or down Highlight Start Scan and then press OK The television will automatically search for that multiplex DTV Manual Tuning 0 New Channels Total 6 New Pos Name ABC TWO ABC THREE ABC NEWS 24 ABCi When the multiplex is found any channels that are not currently in the channel list will be added and the channel information at the top of the screen will be updated Repeat as necessary Press EXIT to finish 23 SETTING UP YOUR TV Manual Tuning for DVB C DTV Settings When Ant Cable Satellite is set to Cable DTV Manual Tuning items are as follows Channels Antenna Cable Frequency input a specific frequency to be scanned The channel order may be changed to suit your personal Modulation choose from one of five QAM modulation preference options Symbol Rate input a specific baud rate KS s to be used for Select DTV Settings from the SETUP menu and press the manual scan OK Highlight S
87. ettings Press QUICK to open the Quick Menu Press A or V to select either Interval Time or Repeat Press or adjust the setting and press OK To sort the folders and files GD Press QUICK to open the Quick Menu from Multi View mode Press A or W to select Sort To start slideshow press OK in the Single View mode Press to select Title File Name New or Old to set the sorting rule Item Description Title DMS File sorting rules 1 Unicode priority 2 0 1 9 capital alphabet A B Z small alphabet a b 2 3 Increasing order File Name File sorting rules USB 1 Unicode priority 2 0 1 9 capital alphabet A B Z small alphabet a b z 3 Increasing order New From new to old according to the date and time when the picture was taken Old From old to new according to the date and time when the picture was taken NOTE Sorting may not be supported by some DMSs To display the device information Press QUICK to open the Quick Menu from Multi View mode e Press A or V to select Device Information NOTE When the photos on the USB device are used or the TV is used as a DMR this feature is not available To close the Photo Viewer aD Press EXIT The television will return to the last viewed channel or external input File Compatibility USB device See page 86 Content on DLNA CERTIFIED S
88. etup and press OK Press A or V to highlight Wireless Setup and press OK Press A or V to highlight Easy Setup and press OK Press or P to select PIN Press W to highlight Start Scan and press OK Press or V to select the desired AP and press OK NOTE Check the MAC address on the label of the AP or in the manual and select your AP When the PIN code window appears enter the displayed PIN into your AP and then press Next to continue the PIN Setup When a message displays to report that the setup is complete press OK 43 CONTROLS AND FEATURES To cancel searching for the AP Press RETURN while searching for the AP A message will appear then press or P to select Yes and press OK Assisted Setup In the PREFERENCES menu highlight Network Setup and press OK Press A or V to highlight Wireless Setup and press OK Press A or V to highlight Assisted Setup and press OK Press A or V to select the desired AP and press OK NOTE Check the MAC address on the label of the AP or in the manual and select your AP Highlight Security Key and press OK The Software Keyboard window will appear Input the Security Key by using the Software Keyboard see page 47 To save your setting press the BLUE button NOTE The Security Key must adhere to these conditions TKIP AES 8 63 ASCII or 64 Hex characters WEP 5 or 13 ASCII or 10 or 26 Hex characters There is only one key ID
89. evision may be unable to detect see page 84 To connect a PC to the HDMI terminal When connecting a PC to the HDMI terminal on the television use an HDMI to DVI adaptor cable and an analogue audio cable If connecting a PC with an HDMI terminal use an HDMI cable type A connector A separate analogue cable is not necessary the back of your television Audio cable for PC to television connection not supplied HDMI to DVI adaptor cable For acceptable PC and video signal formats see page 85 NOTE The edges of the images may be hidden If connecting a certain PC model with a unique PC signal the PC signal may not be detected correctly 13 CONNECTING YOUR TV Connecting a home network The LAN port allows your Toshiba TV to connect to your home network You can use this revolutionary home entertainment networking system to access photo video and audio files that are stored on a DLNA CERTIFIED server and play display them on your TV NOTE If you connect to a shared network outside your home it is advisable to use a router Always use DLNA CERTIFIED products in private network environments If you use a hub or switch to connect the TV to your home network you may not be able to use the automatic setup and will have to manually set up the network address See page 46 If you use a router with built in DHCP functionality use the automatic setup Manual
90. ew Software Press OK The television will automatically start searching for a software upgrade the progress bar will move along the line SEARCHING FOR NEW SOFTWARE Searching for a new software upgrade for this TV Searching If an upgrade is found the television will automatically start downloading If not a screen will appear stating that an upgrade is unavailable Network Upgrade TOSHIBA may offer upgrades for the TV s software in the future The TV s software is upgraded via the Network Before downloading software Configure your TV to connect to the Internet NOTE While the upgrade is being performed you will not be able to watch the TV In the Software Upgrade menu press A or V to select Network Upgrade and press OK NOTE If the network is not available a warning message will appear e The TV software upgrade will start when download succeeds Software Licences The licences for the software used in this television are available for viewing 1 In the SETUP menu press A or V to select Software Licences and press OK A screen will appear displaying all the licensing information required for the televisions software 69 English CONTROLS AND FEATURES System Information and Reset TV System Information This feature can be used to check the version of software currently installed When in DTV mode it includes additional diagnostic information such as signal strength sign
91. following for the battery of the 3D glasses Do not use any battery other than the one specified Do not use any battery with the polarity reversed Do not charge heot disassemble or short the battery Violation of the above may cause explosion or leakage of the battery and a burn or injury may result Cautions on watching 3D images Some viewers may experience a seizure or blackout when exposed to certain flashing images or lights contained in certain 3D television pictures or video games Anyone who has had a seizure loss of awareness or other symptoms linked to an epileptic condition or has a family history of epilepsy should contact a health care provider before using the 3D function Avoid use of the 3D function when under the influence of alcohol If you are ill or feel ill you should refrain from viewing 3D images and consult your health care provider as may be appropriate If you experience any of the following symptoms when viewing 3D video images stop viewing and contact your health care provider Convulsions eye or muscle twitching loss of awareness altered vision involuntary movements disorientation eye strain nausea vomiting dizziness headaches If you feel eye fatigue or other discomfort from viewing 3D video images remove the 3D glasses and discontinue use until the condition is eliminated Viewing in 3D may cause dizziness and or disorientation for some viewers Therefore to avo
92. formation is only for EU member states Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste Integrated batteries and accumulators can be disposed of with the product They will be separated at the recycling centres The black bar indicates that the product was placed on the market after August 13 2005 By participating in separate collection of products and batteries you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health For more detailed information about the collection and recycling programmes available in your country please contact your local city office or the shop where you purchased the product Disposal of batteries and or accumulators The crossed out wheeled dust bin symbol indicates that batteries and or accumulators must be collected and disposed of separately from household waste If the battery or accumulator contains more than the specified values of lead Pb mercury Hg and or cadmium Cd defined in the Battery Directive 2006 66 EC then the chemical symbols for lead Pb mercury Hg and or cadmium Cd will appear below the crossed out wheeled dust bin symbol By participating in separate collection of batteries you will help to assure the proper disposal of products and batteries and thus help to prevent potenti
93. from 10 to 100 39 CONTROLS AND FEATURES White Balance Copy to All Inputs Automatic Format Widescreen This feature copies White Balance on the current input to all other inputs that are set to the same picture mode Individual settings that are not allowed for a specific input will not be copied When this television receives a true Widescreen picture and Auto format is On it will automatically be displayed in Widescreen format irrespective of the television s previous setting Press MENU and or P to select the PREFERENCES menu 1 In the Expert Picture Settings menu press A or V to select White Balance and then press OK Press A or V to select Copy to All Inputs and then e press OK Press V to select Display Settings and press OK confirmation screen appears Press W to select Auto Format and then press P to select On or Off Select Yes and then press OK Display Settings Resetting to the factory defaults Auto Format 4 3 Stretch 1 In the Expert Picture Settings menu press A or V to select Reset and then press OK A confirmation screen appears 4 3 Stretch e9 Select Yes and then press OK When 4 3 Stretch is activated the size switching system changes 4 3 programmes into full screen picture Control Visualization GD inthe PREFERENCES menu press W to select Display Settings and press OK This feature displays the brightness histogram and control curve of the c
94. from which the scan will begin DTV End Frequency This sets the frequency at which the scan will end DTV Modulation You can choose from five QAM modulation settings DTV Symbol Rate This is the baud rate KS s of the scan DTV Network ID This is the Network ID to be utilized for the scan This item is greyed out when DTV Scan Type is set to Full Scan Satellite Settings From the SETUP menu you can add the satellites that you wish to tune and configure detailed settings for each one individually To add a satellite 1 Press MENU and use or P to select SETUP menu e9 Use V to highlight Satellite Settings Press OK Satellite Settings Switch Type LNB Power On Satellite Dish LNB No 1 ASmRAt92E a 1 2 3 4 Transponder Dish Type Fixed Lower LOF MHz 9600 Upper LOF MHz 10600 Press W to highlight new line to add an another satellite and press OK Press W until the required satellite is displayed and press OK 18 SETTING UP YOUR TV To delete a satellite 1 In the Satellite Settings menu press A or V to highlight the satellite you want to delete Press the RED button A confirmation window will appear Press P to select Yes and press NOTE It is not possible to delete position No 1 To edit the satellite settings 1 In the Satellite Settings menu press A to highlight Switch Type Press or P to select None
95. g 3D Safety Settings To enter a new PIN code inthe PREFERENCES menu press A or V to select 3D Setup and then press OK 2 Press or V to select 3D PIN and press OK Press the number buttons to enter a 4 digit number Confirm the code NOTE PIN code cannot be set to 0000 To change or delete your PIN code In the PREFERENCES menu press A or W to select 3D Setup and then press OK Press A or V to select 3D PIN Press the number buttons to enter your 4 digit PIN code Select Change PIN or Delete PIN and then press OK NOTE PIN code cannot be set to 0000 If PIN is deleted 3D Safety Settings is grayed out and the settings are reset to the factory default Forgotten PIN codes In the PREFERENCES menu press A or W to select 3D Setup and then press OK Press or V to select 3D PIN Press 4 times within 5 seconds The code clears Enter a new PIN code Setting 3D Start Message When this feature is set to On a message is displayed onscreen when a 3D signal is received In the PREFERENCES menu press A or W to select 3D Setup and then press OK Press or V to select 3D Safety Settings and press OK Enter your 4 digit 3D PIN code Press or V to select 3D Start Message Press or P to select On or Off 30 CONTROLS AND FEATURES Setting 3D Lock When this feature is set to On you must enter 3D PIN code for changing display mode GD inthe PREFERENCES me
96. hanges 47 CONTROLS AND FEATURES English Setting up the Media Renderer feature Terminology DMS DLNA CERTIFIED Server DMR DLNA CERTIFIED Renderer DMC DLNA CERTIFIED Controller The TV can be configured as a DMR When operating as a DMR the TV displays content provided by a DMS The selection of the media is done by the DMC the TV does not select the input The TV can play photo movie or audio files when operating as a DMR Installation You can configure the DMR settings individually or use Installation mode to be prompted for each setting in order In the PREFERENCES menu highlight Media Renderer Setup and press OK PREFERENCES 3D Setup REGZA LINK Setup Network Setup Photo Frame Setup Teletext e Panel Lock Press A or W to highlight Installation and press OK Press to select On and press OK If you want to change the device name as a Renderer highlight the Device Name field and press OK The Software Keyboard window will appear Input the Device Name by using the Software Keyboard see page 47 Press the BLUE button NOTE The Device Name can be up to 127 characters long Highlight Done and then press OK to save your setting If you want to change the password press or P to select Yes and then press OK 48 Change the password by using the Software Keyboard see page 47 and then press the BLUE butt
97. ic operation Using Media Player with USB When Auto Start is enabled you will be asked if you want to start the Media Player whenever a USB device is inserted If Auto Start is disabled or if you want to connect to a DMS on the network you must manually start the Media Player from the menu To change the Auto Start setting Press MENU and to select the APPLICATIONS menu e9 Press V to select Media Player and press OK APPLICATIONS YouTube Media Player Programme Timers On Timer Sleep Timer Press or to select SETUP and press OK Press or V to select USB Auto Start and then press or P to select On or Off Setup USB Auto Start Divx VOD Media Server Setup Auto Start GD Insert USB device into the USB socket on the right side of the TV A prompt will appear Press lt P to select Yes and then press Press A or W to select Photo Movie or Music and press OK NOTE If Auto Start is set to Off you can start the Media Player manually Manual Start 1 Insert USB device into the USB socket on the right side of the TV inthe APPLICATIONS menu select Media Player and press OK Press A or W to select Photo Movie or Music and press OK Media Player Movie Music Setup To select a file in the list of contents 1 Press A or V to select a file or folder e9 Press OK to move to the next layer or press RETURN to return to
98. id injury do not place your TV near open stairwells balconies or wires Also do not sit near objects that could be broken if accidentally hit When viewing 3D images always wear 3D glasses Watching 3D images without 3D glasses may cause eye strain Use specified 3D glasses When watching 3D images do not wear 3D glasses at an angle and do not lie down If you watch while lying down or with the glasses tilted the 3D effect is lost and it may cause eye strain It is recommended that the viewer s eyes and 3D glasses are level with the screen If you have prescription eye glasses or contact lenses wear the 3D glasses over them Watching 3D images without appropriate eyewear may cause eye strain If 3D images often appear in double or if you cannot see the images in 3D stop viewing Continuous viewing may cause eye strain Due to the possible impact on vision development viewers of 3D video images should be age 6 or above Children and teenagers may be more susceptible to health issues associated with viewing in 3D and should be closely supervised to avoid prolonged viewing without rest Watching TV while sitting too close to the screen for an extended period of time may cause eye strain The ideal viewing distance should be at least three times the screen height If the 3D PIN number has been forgotten Use the Master PIN code of 1276 and then change to a number of your choice Select 3D PIN from the PREFERENCES
99. ield you want to change and then use the number buttons to input the IP address To save the setting press OK NOTE IP address field numbers must be between 0 and 255 After each field number has been set press OK to store the entire address If the entire IP Address is invalid a warning message will appear after OK is pressed Press or V to highlight Subnet Mask and edit in the same way as IP Address IP Address Setup Auto Setup IP Address Subnet Mask Default Gateway Press A or W to highlight Default Gateway and edit in the same way as IP Address NOTE If you manually set the IP address you must not use the same IP address for any other device The IP address you use should be a private address DNS Setup NOTE When the DHCP function of the router connected to this TV is Off set Auto Setup to Off and manually set the DNS address es Your internet service provider should have provided these to you Auto setup inthe PREFERENCES menu highlight Network Setup and press OK e9 Press or V to highlight Advanced Network Setup and press OK e Press or to highlight DNS Setup and press OK Highlight Auto Setup and then press or P to select On NOTE Other items will be grayed out when Auto Setup is set to On Manual setup inthe PREFERENCES menu highlight Network Setup and press OK Press or V to highlight Advanced Network Setup and press OK Press A or
100. igital settings other settings Subtitles In digital mode this feature will show subtitles on the screen in the selected language provided they are being broadcast Ge In the DTV Settings menu press W to select Subtitle and Audio and press OK Press W to select Subtitle Display and use lt or to select On or Off Subtitle and Audio Subtitle Display Subtitle Type Normal Primary Subtitle Language English Secondary Subtitle Language Audio Type Normal English Primary Audio Language Secondary Audio Language English English Press W to select Primary Subtitle Language or Secondary Subtitle Language and use or P to select an option The SUBTITLE button can be used to select subtitle on or off for the current channel only and to select the subtitle language if more than one subtitle is available Audio languages This feature allows a programme or film to be viewed with a choice of soundtrack language provided multiple language tracks are being broadcast 1 In the Subtitle and Audio menu press V to select Audio Type and use to select Normal or For Hard of Hearing Press W to select Primary Audio Language Secondary Audio Language and use lt or select an option If more than one soundtrack is available use the CDI I button to select between them Common Interface The Common Interface Slot situated on the side of the television enables the insertion of a CAM Condi
101. ings menu press A or V to select RGB Filter and then press OK e Press A or V to select Red Green or Blue to adjust Press P to select On Press V to select Colour or Tint and then press P to adjust Press exit NOTE It is not possible to turn off all three colours simultaneously White Balance Window Display This feature displays a special Window Pattern to be used when adjusting white balance with a measuring device In the Expert Picture Settings menu press A or V to select White Balance and then press OK Press or V to select Window Display and press or P to select On Press EXIT to close White Balance Setting Type You can select the type of white balance adjustment that you wish to perform In the Expert Picture Settings menu press A or V to select White Balance and then press OK e Press A or V to select Setting Type and press to select 2P or 10 White Balance 2P White Balance Press W to select 2P White Balance Press to select Red Offset Green Offset Blue Offset Red Gain Green Gain or Blue Gain Press P to adjust White Balance 10P White Balance ao Press W to select 10P White Balance e9 Press A or V to select IRE Red Green or Blue Press P to adjust NOTE The adjustments made for Red Green Blue are stored separately for each IRE setting There are ten IRE settings
102. iption Repeat step 5 for other frequencies Surround Settings Balance Surround Voice Enhancement and Dynamic Bass Boost help to create an enhanced surround sound experience with The sound controls are accessible in digital and analogue deep rich bass from stereo sound sources Your TV s audio will modes sound fuller richer and wider 1 Select the SOUND menu 1 In the SOUND menu press W to highlight Advanced Sound Settings and then press OK 2 Press V to highlight Balance and then press lt or gt to emphasize left or right speaker balance 2 Press V to highlight Surround and then press to select Off Spatial or Cinema Sound Navi Advanced Sound Settings You can customize current sound mode settings Select the Sound Navi appropriate mode in accordance with the installation location of Surround CE the TV Stand or Wall and adjust the equalizer on screen as Voice Enhancement desired Dynamic Bass Boost 1 Select the SOUND menu e9 Press V to highlight Advanced Sound Settings and then press OK 32 CONTROLS AND FEATURES 3 Press W to highlight Voice Enhancement and then press or P to select On Press W to highlight Dynamic Bass Boost and using 44 or P select the desired bass expansion level Off Low or High Dolby Volume This feature provides a consistent sound volume regardless of programmes channels or input sources GD In the SOUND menu press V to highlight Dolby
103. l Radio Interference Filter the removal of which will impair its performance IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN Do DO read the operating instructions before you attempt to use the equipment DO ensure that all electrical connections including the mains plug extension leads and inter connections between pieces of equipment are properly made and in accordance with the manufacturers instructions Switch off and withdraw the mains plug before making or changing connections DO consult your dealer if you are ever in doubt about the installation operation or safety of your equipment DO be careful with glass panels or doors on equipment DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND LIVE PARTS THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE Do not DO NOT obstruct the ventilation openings of the equipment with items such as newspapers tablecloths curtains etc Overheating will cause damage and shorten the life of the equipment DO NOT allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids such as vases to be placed on the equipment DO NOT place hot objects or naked flame sources such as lighted candles or nightlights on or close to equipment High temperatures can melt plastic and lead to fires WARNING To prevent the spread of fire keep candles or other open flames away f
104. m from EIA CEA 861 D compliant consumer electronic devices such as a set top box or DVD player with HDMI or DVI output For acceptable video signal formats see page 85 NOTE Some early HDMI equipment may not work properly with your latest HDMI TV due to the adoption of a new standard Please unplug your HDMI cable first and then try setting the INSTAPORT and Enable Content Type options to Off Your early HDMI source should operate properly with your television See page 73 Supported Audio format Linear PCM Dolby Digital AC 3 sampling rate 32 44 1 48kHz To connect an HDMI device Connect an HDMI cable type A connector to the HDMI terminal For proper operation it is recommended that you use an HDMI If your HDMI connection is capable of 1080p and or your television is capable of refresh rates greater than 50Hz you will need a Category 2 cable Conventional HDMI DVI cable may not work properly with this model HDMI cable transfers both video and audio Separate analogue audio cables are not required see illustration See HDMI 2 Audio on page 73 the back of your television HDMI cable HDMI device To view the HDMI device video press the button to select HDMI 1 HDMI 2 HDMI 3 or HDMI 4 mode 11 To connect DVI device Connect an HDMI to DVI adaptor cable HDMI type A connector to the HDMI 2 terminal and audio cables to the PC HDMI 2 AUDIO socket see illustration
105. n menu and press OK Picture still This feature is used to hold a still image on the screen Press Y to hold an image on the screen and press Y again to cancel HDMI Information Display When the HDMI Information Display feature is On and you are watching an HDMI input source pressing the button displays the HDMI signal information banner In the PREFERENCES menu press W to select HDMI Information Display Press to select On HDMI signal information is as follows Resolution Scan Type Frame Rate Aspect Bit Depth Colour Space RGB YUV Chroma Format and Content Type if available 41 CONTROLS AND FEATURES Using your home network This TV is DLNA CERTIFIED Player and Renderer This TV can play digital content stored on a DLNA CERTIFIED product with server function If you want to use this TV as a DLNA CERTIFIED Player or Renderer you will have to configure the network on your TV see page 14 If you want to use your home network you will have to configure the network on your TV see page 14 Change the network settings if necessary see Setting up the Network on page 43 When using a wireless home network CAUTION Bluetooth and Wireless LAN devices operate within the same radio frequency range and may interfere with one another If you use Bluetooth and Wireless LAN devices simultaneously you may occasionally experience a less than optimal network perform
106. ncy range of 5 15 GHz to 5 35 GHz it is restricted to indoor use f this device is going to be operated for 802 11 b g n function in the frequency range of 2 454 GHz to 2 4835 GHz in France it is restricted to indoor use A general authorization is required for using this device outdoors or in public places in Italy This device is NOT ALLOWED to be used in the geographical area within a radius of 20km from the centre of Ny Alesund in Norway CEO Ukraine Statement Contains approved USB WLAN Adaptor model name WLU5040 ROHS approved by CB UkrCERTRADIO 42 CONTROLS AND FEATURES Setting up the Network You can select the Network Type inthe PREFERENCES menu highlight Network Setup and press OK PREFERENCES 3D Setup REGZA LINK Setup Network Setup Media Renderer Setup Photo Frame Setup Teletext Panel Lock Press A or V to highlight Network Type and then press or P to select Wired or Wireless Network Setup Network Type Wireless Setup Advanced Network Setup Network Connection Test NOTE If the Dual Band WLAN Adaptor is not connected Wireless cannot be selected If you selected Wired see Advanced Network Setup on page 45 Wireless Setup NOTE This feature is grayed out when the Dual Band WLAN Adaptor is not connected or Network Type is set to Wired Continued connection of AP Access Point is not guaranteed The connection may be disconnected while wa
107. ning sub pages the sub pages are automatically displayed in sequence To quit automatic sub page change press or gt Once selected the sub page you are viewing will be highlighted and as the television loads any additional sub pages the colour of the numbers will change indicating that these pages have been loaded These sub pages will remain available to view until another page is chosen or in normal TV mode the channel is changed Navigating pages using Auto If Fastext is available four coloured titles will appear at the base of the screen To access one of the four given subjects press the relevant coloured button on the remote control For further information on your particular text system s see the broadcast text index page or consult your local Toshiba dealer Navigating pages using LIST The four coloured choices at the bottom of the screen are numbers 100 200 300 and 400 which have been programmed into the television s memory To view these pages press the relevant coloured buttons To change these saved pages press the relevant coloured button and enter the 3 digit number This number will change in the top left of the screen and in the coloured highlight Press OK to save Whenever OK is pressed all four page numbers showing at the bottom will be saved and the previous ones will be lost If OK is not pressed the selection will be forgotten when the channel is changed Othe
108. nput source from the popup window some REGZA LINK devices may automatically turn on When the television is switched on it will take a few minutes for the REGZA LINK icon to appear in the list When an HDMI cable is removed it will take a few minutes for the icon to disappear If the HDMI cable from connected equipment is changed Enable REGZA LINK in the REGZA LINK Setup menu may need to be reset to On If you change the HDMI lead to a connected device or change an HDMI device setting reset the Enable REGZA LINK item on the REGZA LINK Setup menu from Off to On REGZA LINK playback device control With the REGZA LINK mode on your television s remote control you can control the connected REGZA LINK playback device you are watching To control the REGZA LINK input source first select the equipment by REGZA LINK input source selection Available remote control keys behind the panel Co setup amp MENU Root Top ovo REGZA LINK See page 8 for details on available remote control key functions NOTE The available functions depend on the equipment connected All of the remote control keys may not be available Please refer to the operation manual for each piece of equipment connected REGZA LINK one touch play When connected equipment is switched on REGZA LINK will automatically detect the television through the input selection If the television is in standby it will be switched
109. ns and Answers 79 INFORMATION License Information 82 Information epe erre tree erp rn CH rre 84 Specifications and accessories 88 INSTALLING YOUR TV Safety Precautions This equipment has been designed and manufactured to meet international safety standards but like any electrical equipment care must be taken to obtain the best results and for safety to be assured Please read the points below for your own safety They are of a general nature intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased Air Circulation Leave more than 10cm clearance around the television to allow adequate ventilation This will prevent overheating and possible damage to the television Dusty places should also be avoided Heat Damage Damage may occur if the television is left in direct sunlight or near a heater Avoid places subject to extremely high temperatures or humidity Place in a location where the temperature remains between 5 C 41 F min and 35 C 94 F max Mains Supply The mains supply required for this equipment is 220 240v AC 50 60Hz Never connect to a DC supply or any other power source DO ensure that the television is not standing on the mains lead Use only the supplied lead DO NOT cut off the mains plug from this equipment this incorporates a specia
110. nu press A or W to select 3D Setup and then press OK Press A or V to select 3D Safety Settings and press OK Enter your 4 digit 3D PIN code Press A or V to select 3D Lock Press or P to select On Setting 3D Timer Lock When the 3D Timer Lock feature is set to On neither the PIN input window nor the 3D start message will be shown while the 3D Enable timer is active even if a switch to 3D Mode occurs This helps to avoid asking the 3D Lock PIN and displaying 3D start message every time when switching to 3D In the PREFERENCES menu press A or V to select 3D Setup and then press OK Press A or V to select 3D Safety Settings and press OK Enter your 4 digit 3D PIN code Press A or V to select 3D Timer Lock Press or P to select On 31 Setting Enable 3D Timer This feature helps to remind you not to watch 3D video for extended periods of time Once a set period of time has passed a dialogue will be shown asking you if you wish to continue viewing or not In the PREFERENCES menu press A or V to select 3D Setup and then press OK Press or V to select 3D Safety Settings and press OK Enter your 4 digit 3D PIN code Press or V to select Enable 3D Timer Press to select 30 60 90 or 120 minutes To cancel the timer select Off Displaying 3D Important Info In the PREFERENCES menu press A or V to select 3D Setup and then press OK Press A or V to select 3D Important
111. olour Decoding Digital Audio Output Press A or V to select the input you want to skip and then press the RED button to turn on the skip Input Labeling Input Label EXT 2 EXT 3 HDMI 1 HDMI 2 HDMI 3 HDMI 4 PC e To turn off the skip press the RED button again The input set to Skip is greyed out in the Input Selection window and is skipped over when you press on the remote control Labeling video input sources These input labels are shown in the input selector You can label video inputs according to the devices you have connected to the TV D inthe PREFERENCES menu press W to highlight AV Connection and press OK e9 Press A or V to highlight Input Labeling and press OK Input Labeling Input Label EOS _ EXT 2 EXT 3 HDMI 1 HDMI 2 HDMI 3 HDMI 4 PC e Press A or V to highlight the item you want to label and then press or to select Amplifier Cable DVD Game PC Recorder Satellite or VCR or press the GREEN button to select User Input NOTE When User Input is selected by pressing the GREEN button the Software Keyboard window will appear Input the desired characters 10 characters or less by using the Software Keyboard see page 47 or using the number buttons for a number input To save your settings press the BLUE button Repeat step 3 for other video inputs Colour Decoding If you view DVDs with this TV the Colour Deco
112. olour buttons Text and interactive service control buttons 7 24 To call up text services 25 To access Media Player Menu 26 Digital Subtitles or Analogue TEXT Subtitle pages if available 27 When in TV mode When in Text mode v Picture still To reveal concealed EX Analogue time text 10 E3 display To hold a wanted page To enlarge text 12 display size O EX To select page 15 whilst viewing a 17 normal picture When using Programme During Playback 19 Guide gt To PLAY 44 24 hours Pb 24 hours HAI To PAUSE STEP 21 44 page 4 SKIP BACK PP 1 page 44 REWIND 25 _ PP FAST FORWARD 24 z Pbi SKIP FORWARD aa gt gt 28 When using REGZA LINK i 0 To turn On Standby AUDIO To access AUDIO Menu ue eroe SET UP To access SET UP Menu ce B To EJECT REGZALINK ROOT To access ROOT Menu 1 For On Standby mode CONTENTS To access CONTENTS Menu TOP To access TOP Menu 2 To select external input sources DVD To access DVD Menu 3 Selectable Picture preferences 4 Widescreen viewing Inserting batteries and effective range 5 Stereo bilingual transmissions Remove the back cover to 6 To select TV Mode f reveal the battery compartment 7 To access the analogue or digital Channel List A and make sure the batteries are itch 4 inserted the proper way 8 switch between 2D and 3D mode Suitable battery types for this 9 Number buttons NS remote are A
113. on NOTE The Web Password can be up to 15 characters long Highlight Done and then press OK If you want to limit access from unexpected DMCs press or P to select On and then press OK If you want to proceed with registration of DMCs press or P to select Yes and then press OK Press A or W to highlight the item you want to accept and press OK A check will appear in the box To remove the check press OK again Press gt to highlight Done and then press OK The Maximum Volume Setup window appears Press 4 or P to adjust to the desired volume Then press OK Media Renderer In the PREFERENCES menu highlight Media Renderer Setup and press OK Press A or W to highlight Media Renderer and then press or P to select On or Off Device Name Setup The TV s DMR device name can be changed The device name can be confirmed from the DMC In the PREFERENCES menu highlight Media Renderer Setup and press OK Press A or W to highlight Device Name Setup and press OK Highlight the Device Name field and press OK The Software Keyboard window will appear Input the Device Name by using the Software Keyboard see page 47 Press the BLUE button NOTE The Device Name can be up to 127 characters long Highlight Done and then press OK to save your setting CONTROLS AND FEATURES Web Password Setup This setup determines the password that is necessary for the DMC to access built in web pages on
114. on If the RED LED is not lit check that the mains plug is connected to the power supply and press the 5 POWER button on the left side of the television to switch the television on If the picture does not appear press on the remote control it may take a few moments The BLUE LED will be lit To put the television into Standby press on the remote control To view the television press again The picture may take a few seconds to appear For energy saving We recommend that you use the television with the factory settings The factory settings are for energy saving Turning the television off at its mains supply or un plugging it will cut energy use to nearly zero for all televisions This is recommended when the television is not being used for a long time e g when on holiday Reducing the brightness of the screen will reduce energy use Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills NOTE Putting the television into standby mode will reduce energy consumption but will still draw some power E 3D IR sensor page 7 k USB 1 port Media Player T USB 2 port Photo Viewer COMMON INTERFACE The Common Interface is for a Conditional Access Module CAM Contact a service provider The software updating of CI Plus CAM be automatically executed At this time your Recording Reminder programming will be canceled
115. on automatically These functions can be enabled or disabled from the REGZA LINK Setup see page 75 NOTE Even if the equipment is showing a menu the television may automatically show the input source This feature depends on the connected equipment and television state REGZA LINK system standby If the television is turned off standby mode the television will send a message to turn off standby mode all of the REGZA LINK devices connected to the television These functions can be enabled or disabled from the REGZA LINK Setup see page 75 NOTE This feature depends on the connected equipment and television state REGZA LINK system audio control With your television s remote control you can adjust or mute the sound volume of the speakers connected to the television via an AV amplifier First set the remote control mode switch to REGZA LINK Set the Speaker Preference to Amplifier in the REGZA LINK Setup menu e Confirm that a connected REGZA LINK device such as a DVD player etc is selected for the AV amplifier input source NOTE These functions depend on the device connected When you turn on the AV amplifier change its input source or adjust the sound volume the sound will be output from the AV amplifier s speakers even if TV Speakers has been selected Turn the television off and on again to output the sound from the TV Speakers This feature may not work if the AV amplifier is o
116. perated Toshiba PC compatible with REGZA LINK This feature automatically adjusts the suitable widescreen formats and picture preferences when connected to a Toshiba PC compatible with REGZA LINK NOTE This feature depends on the connected equipment state 76 TEXT SERVICES Text services This television has a multi page text memory which takes a few moments to load It offers two Modes of viewing text Auto will display Fastext if available LIST will save your four favourite pages Selecting modes The text character set will be automatically chosen by the language setting in the SETUP menu inthe PREFERENCES menu select Teletext 2 With lt choose Auto or LIST then press EXIT PREFERENCES 3D Setup REGZA LINK Setup Network Setup Media Renderer Setup Photo Frame Setup Teletext Panel Lock Text information The TEXT button To view text services press TEXT Press again to superimpose the text over a normal broadcast picture and again to return to normal viewing Channels cannot be changed until text is cancelled The first text page shown will be the initial page Any text page can be accessed by entering the 3 digit page number using the numbered buttons pressing the coloured buttons or pressing P to advance to the next page and Pv to go back to the previous page Sub pages The pages on the screen will dynamically update as sub pages are received If you open a page contai
117. poses of public display or commercial gain may infringe on copyright laws 35 CONTROLS AND FEATURES Picture controls Most of the picture controls and functions are available in both digital and analogue modes PLEASE NOTE Features not available will be greyed out or hidden Picture Mode This television offers the choice of personalising the picture style AutoView Dynamic Standard Hollywood 1 Hollywood 2 Store Game and PC are preset options and affect many features settings within the television NOTE Because the AutoView mode automatically adjusts picture settings based on ambient light conditions and input signal content the Auto Brightness Sensor and Expert Mode menus are greyed out when it is selected Store mode is only available when Location is set to Store Game mode is available in external input mode other than aerial input When you select Game mode suitable widescreen formats will be selected PC mode is available in RGB PC input mode or HDMI input mode an In the PICTURE menu press V to select Picture Mode 4 eee eee PICTURE Picture Mode Dynamic Reset Backlight Contrast Brightness Colour Tint Sharpness Press lt or P to select the picture mode you prefer and press OK NOTE The picture mode you select affects the current input only You can select a different picture mode for each input Picture preferences You can customize current picture
118. ppen in a number of phases which will be advertised in your area well in advance It is recommended that at each phase the television is re tuned to ensure that existing and new digital services can be viewed without disruption 26 CONTROLS AND FEATURES General controls Quick Menu Quick Menu helps you access some options quickly such as Picture Mode Picture Size More Information Sleep Timer etc Press QUICK to display the Quick Menu and use A or V to select the option Quick Menu Picture Mode Picture Size 3D Settings More Information Channel Options YouTube Media Player Photo Frame Sleep Timer Speakers Wireless Information AutoView Super Live 00 00 TV Speakers NOTE Quick Menu items are different depending on the current mode Quick menu item example Selecting positions To select a position use the numbered buttons on the remote control Positions can also be selected using PA and Pv To display on screen information such as position input mode or stereo mono signal press 1 Press again to cancel The Time Display analogue only The time display facility allows the current text service time to be seen on the television screen Press whilst watching a normal television broadcast to see the time display from the broadcaster It will remain on screen for about 5 seconds NOTE This display may not be available in some cases Stereo an
119. programme or by setting the mode to daily or weekly can be used to view a 1 In the APPLICATIONS menu press W to select On series of programmes Timer and press OK Press MENU and to select the APPLICATIONS menu Press or V to select Enable On Timer and then press or P to select On Press W to select Programme Timers and then press OK On Timer Enable On Timer e Enable DTV Clock APPLICATIONS Power On Time Repeat Media Player Volume Programme Timers On Timer Sleep Timer 00 00 Press W to select Enable DTV Clock and then press 4 or P to select On or Off Press A or V to go through the list adding the details of the On Timer by using the number buttons and and P to make selections Press V if necessary to select an open timer position then press OK The Edit Timer menu will now appear on screen Power On Time only for DTV Clock On mode Set the time you prefer with the number buttons eo Press and V to go through the list adding the details Repeat only for DTV Clock On mode Select the of the programme by using the number buttons and desired On Timer operation Once Every Day Mon and P to make selections Fri Mon Sat Sat Sun MDG NOTE When an external input is selected in the Input Timer Type Reminder field a channel cannot be selected Channel Emm 30 CABC Channel Volume Set the volume that will be applied when the television turn
120. r buttons and press OK Pos Name 24 SETTING UP YOUR TV Move Press the GREEN button to activate the Move feature Use the or V buttons to select the channel you wish to move and press OK to check If you wish to move multiple channels at once select another channel and check in the same way Repeat as necessary Once all desired channels have been checked use the A or V buttons to place the focus at the position to which you wish to move the channels The channels will be inserted above the highlighted channel Press the GREEN button to execute the move Channels TV mm Line No 1 10 Pos Name S Rat 1 2 ABC TWO 1 ABC THREE 30 CABC Channel 40 ABC NEWS 24 51 ABCi AA AC Sort Press the YELLOW button A confirmation window will appear Press or P to select Yes and press OK Sort Your existing channel order will be lost Do you wish to continue lt Yes The Sorting Type selection window will appear Sort Sorting Type Press or P to set the sorting type A Z Station name order A to Z Channel Number Position No order numerical sequence Press W to highlight Sort and press OK Channels Satellite Select DTV Settings from the SETUP menu and press OK e9 Select Channels and press OK The satellite channel list will appear Channels Line No 4 1200 Pos Station Satellite TV mm Satellite 9 1 DDD 19
121. r pages may be viewed by entering the 3 digit page number but DO NOT press OK or these pages will be saved 77 TEXT SERVICES Control buttons Below is a guide to the functions of the remote control text buttons To display the index initial page Press i to access the index initial page The one displayed is dependant on the broadcaster TEXT To display a page of text Press TEXT to display text Press again to superimpose text over a normal picture Press again to return to normal television viewing Channels cannot be changed until this has been done To reveal concealed text To discover the solutions on quiz and joke pages press the button To hold a wanted page At times it is convenient to hold a page of text Press and will appear in the top left of the screen The page will be held on screen until the button is pressed again To enlarge the text display size Press once to enlarge the top half of the page press again to enlarge the bottom half of the page Press again to revert to normal size To select a page whilst viewing normal picture Enter the page number then press normal picture will be displayed The television will indicate when the page is ready by changing the colour of the page number at the top of the screen Press TEXT to view the page To display news flashes Select the news flash page for the chosen text service see the index page of text service The news fl
122. r when time from a digital broadcast is available The photo and clock displays are moved by 4 dots every 5 minutes to minimize the risk of screen burn in The pre installed photo file is stored in the TV s flash memory before shipment Picture Size selection Normal Dot by Dot is available by pressing the QUICK button However when the resolution is 1920 x 1080 or above the Picture Size selection menu will be grayed out 61 Other features Panel Lock Panel Lock disables the buttons on the television All buttons on the remote control can still be used D inthe PREFERENCES menu select Panel Lock and choose or Off using PREFERENCES 3D Setup REGZA LINK Setup Network Setup Media Renderer Setup Photo Frame Setup Teletext Panel Lock When Panel Lock is On reminder will appear when the buttons on the television are pressed If the standby button is pressed the television will switch off and can only be brought out of standby by using the remote control CONTROLS AND FEATURES The timers On Timer z The feature allows you to set the television to turn on Prog ramme Timers digital only automatically at a certain time of day or after a certain length of time When On Timer is set to On the green On Timer This feature will set the television to go to a specific channel at indicator on the front of the television is lit a certain time It can be used to view a particular
123. rd the next scheduled programme select s 114 Multi audio track Next and press OK The Edit Timer screen will 0 4 18 Parental rating appear Encrypted Timer info zu Recording Edit Timer 10 50 26 Tue 26 Apr 11 00 Reminder mm 30 CABC Channel Seven Wonder4 Timer Type Reminder Start Time 10 49 Repeat Once Set Timer Edit RETURNI Back The details of the programme will already have been added to the timer Highlight Set Timer and press OK to save To indicate that a Recording Timer has been set a clock icon will be displayed in the Next and Also fields of the information screen A check mark will appear if the timer is a Reminder Timer 64 CONTROLS AND FEATURES Guide 1 Select the on screen guide by pressing GUIDE and the guide screen will appear highlighting details of the channel and programme currently being viewed This may take a few moments to appear Thu6 10 50 Tue 6 Apr 18 00 18 30 19 00 19 30 20 00 6 M6 5 SIM CITOP MODEL ELES SIMPSON 9W9 WUSUMMERLAND ER SUMMERLAND GALES SIM 11 NT1 T Nicky La EA Street fight Ed Dragon B Dragon B EK 2000 PARIS PREMIERE AMA SORCIE EJHAPPY DAYS EJHAPPY DAYS 34 AB1 Ej Evamag H421 jump street KI Jerry Springer Show ElCity guys KHL 800 FlowerGd 6Mbs 801 FlowerGd 4Mbs 802 FlowerGd 2Mbs 804 Codec 4 3 806 ITV1 807 ITV3 808 ITV2 80
124. rference to other devices or services is perceived or identified as harmful If you are uncertain of the policy that applies to the use of wireless devices in a specific organization or environment you are encouraged to ask for authorization to use the Wireless LAN device prior to turning on the equipment When using the TV under wireless LAN environment The function of all IEEE802 11 is not supported The ad hoc mode is not supported t is recommended to use IEEE 802 114 or IEEE 802 11n on 5 GHz for audio and SD video streaming It is recommended to use IEEE 802 11n on 5 GHz for HD video streaming t is recommended that the encoding rate for streaming video content is 20 Mbps or less It is not recommended to use 2 4 GHz for audio and video streaming Content playback may be interrupted by various surrounding interference Europe Statement This USB WLAN Adaptor built in may be operated in below country AT Austria IS Iceland BE Belgium LI Liechtenstein CH Switzerland LT Lithuania cY Cyprus LU Luxembourg cz Czech Republic LV Latvia DE Germany MT Malta DK Denmark NL Netherlands ES Spain NO Norway FI Finland PL Poland FR France PT Portugal GB United Kingdom SE Sweden GR Greece SI Slovenia EE Estonia SK Slovakia HU Hungary BG Bulgaria IT RO Romania IE Ireland TR Turkey If this device is going to be operated in the freque
125. rk Alliance THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO i ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD AVC VIDEO AND OR ii DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA L L C SEE HTTP WWW MPEGLA COM W AUDYSSEY Audyssey EQ technology EQ Manufactured under license from Audyssey Laboratories U S and foreign patents pending Audyssey EQ is a registered trademark of Audyssey Laboratories Audyssey EQ is based on the award winning Audyssey MultEQ technology It is the first ever room equalization solution that can achieve optimum sound for a large listening area and it is featured in many high end home theater products Audyssey EQ is used in the TV tuning process to calculate an equalization solution that corrects time and frequency response problems in TV systems This results in clear rich sound with more intelligible dialog 82 INFORMATION Cleaning the screen and cabinet Turn off the power clean the screen and cabinet with a soft dry cloth We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage Disposal The following in
126. rk Setup Wired Network Name SSID set Network Type Wireless Setup Authentication Authentication set Advanced Network Setup Press or V to highlight IP Address Setup and press OK Advanced Network Setup IP Address Setup DNS Setup MAC Address Encryption Encryption set Security Key Security Key set AP MAC The AP s MAC address is displayed when Address the TV is connected with the AP USB MAC The MAC address of the USB Dual Band Address WLAN Adaptor is displayed DHCP Enabled is displayed when using DHCP Disabled is displayed when not using DHCP IP Address The TV s IP address Subnet Mask Value of the Subnet Mask Default Address of the Default GATEWAY Gateway DNS Address of the DNS 45 CONTROLS AND FEATURES Highlight Auto Setup and then press or P to select On IP Address Setup Auto Setup IP Address Subnet Mask Default Gateway NOTE Other items will be grayed out when Auto Setup is set to On Manual Setup inthe PREFERENCES menu highlight Network Setup and press OK Press A or W to highlight Advanced Network Setup and press OK Press A or V to highlight IP Address Setup and press OK Highlight Auto Setup and then press to select Off IP Address Setup Auto Setup IP Address Subnet Mask Default Gateway Press A or V to highlight IP Address Press to highlight the f
127. rom this product at all times DO NOT use makeshift stands and NEVER fix legs with wood screws To ensure complete safety always fit the manufacturer s approved stand bracket or legs with the fixings provided according to the instructions DO NOT leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode Switch off by withdrawing the plug and make sure your family knows how to do this Special arrangements may need to be made for people with disabilities DO NOT continue to operate the equipment if you are in any doubt about it working normally or if it is damaged any way switch off withdraw the mains plug and consult your dealer ABOVE ALL NEVER let anyone especially children push or hit the screen and cabinet back or push anything into holes slots or any other openings in the case These actions will damage screen or internal parts NEVER connect the supplied COMPONENT Adaptor cable SCART AV Adaptor cable or AV Adaptor cable to a wall outlet These cables are ONLY for insertion into the socket provided for the purpose on the rear of the TV NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry INSTALLING YOUR TV Installation and important information Where to install Locate the television away from direct sunlight and strong lights Soft indirect lighting
128. s 1 1 mm 9 wo mp 11 NT1 mm 31 PARIS PREMIERE mu 34 AB1 IL 51 Tv1 Press A or V to highlight a channel and press OK to watch Skip channels This feature allows you to set channels that will be skipped when Pv or PA are used to tune Select the channel you want to skip in your channel list From the Quick Menu press W to select Channel Options and press OK Press repeatedly to highlight the skip e box Press OK to select A tick will appear in the box Repeat steps 1 through 4 for other channels Press EXIT NOTE Skipped channels cannot be selected by Pv or PA but still be accessed by direct number entry when tuned a icon will be displayed in the banner to indicate as a skipped channel Locking channels Locking Channels stops the viewing of digital channels and they can only be accessed by entering the PIN 1 Select the channel you want to lock in your channel list From the Quick Menu press V to select Channel Options and press OK Press gt repeatedly to highlight the lock iy box Press OK to select A tick will appear in the box If a PIN has already been set PIN entry will be required to set the locked channels Repeat steps 1 through 4 for other channels Press EXIT og From this point on when any of the channels in the Locked Channel list are selected the PIN must be entered before they can be accessed 67 CONTROLS AND FEATURES D
129. s on Start Tim 10 49 LL Time until Power On only for DTV Clock Off mode Set the amount of time from now until the TV turns on using the number buttons maximum of 12 hours Repeat Once seus To cancel the On Timer 0298 Input Edit RETURN Back 1 In the On Timer menu select Enable On Timer e When all of the details have been entered highlight Set Timer and press OK to save the timer e Press to select Off The ORANGE RED programme timer indicator on the front of the television will be lit see page 81 for details PLEASE NOTE When a timed programme is about to start an information screen will appear offering the option of watching or cancelling the programme The menus and other channels will not be available during the timed programme unless the programme timer is cancelled The programme timer you set is not performed when the TV is turned off with the D POWER switch It will only be possible to create or edit programme timers for the currently tuned DTV input CONTROLS AND FEATURES Sleep Timer The television can be set to turn itself Off after a certain length of time inthe APPLICATIONS menu press to select Sleep Timer Use the number buttons to set the desired time For example to switch the television off in one and a half hours enter 01 30 or press to increase decrease in steps of 10 minutes Maximum time setting is 12 hours Press EXIT to finish To cancel the Sleep Timer
130. select Stand or Wall TV Mounting If you are mounting the TV on a wall please select Wall Stand is recommended for other uses This setting may be modified later under Sound Navi in the SOUND menu Press OK and the AutoView screen will appear press or to select Yes or No AutoView AutoView mode automatically adjusts picture settings to suit ambient light conditions Do you wish to enable AutoView mode Press OK If the Ant Cable Satellite screen appears press A or W to select Antenna Cable or Satellite and then press OK to check 4 4 Ant Cable Satellite Antenna Satellite Next If DVB C is not supported in your area Cable will not be displayed When you select Antenna or Cable follow steps 10 to 13 When you select Satellite skip to step 14 When you select Antenna or Cable and Satellite the Satellite Settings startup screen will appear automatically after completing the Antenna or Cable scan and pressing OK Select Next and press OK The Auto Tuning startup screen will appear with the option to select between DTV and ATV DTV or ATV if available Use lt or to select the appropriate mode Press amp or W to highlight Start Scan and then press OK The television will start to search for available DTV and or ATV channels The progress bar will indicate the scan status SETTING UP YOUR TV You must allow the television to complete the search Auto
131. setup may not work If you connect the TV and PC directly use a crossover LAN cable To connect the TV to a home network Wired the back of your television J i IL E Modem if available Router with hub 2 Cable Phone jack Server PC gem m oon T LT 2 3 1 Coaxial or telephone cable depending on your modem type 2 Standard LAN cable 3 Do NOT connect a phone jack directly to the TV s LAN port 14 To connect the TV to a home network with an internet connection Wireless Please refer to Wireless Setup section on page 43 TV Built in WLAN system Access point AP Wireless LAN router Modem lt GE J CONNECTING YOUR TV Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television Whilst all the necessary adjustments and controls for the television are made using the remote control the buttons on the television may be used for some functions POWER switch Full Power Down Option GREEN LED On Timer set Ambient Light Sensor ORANGE LED Programme timer set digital only RED LED Programme timer Active digital only Switching
132. stem then C for standard terrestrial channels or for cable channels and the Channel number Press OK to save Skip To prevent certain channels from being viewed positions can be skipped Select ATV Manual Tuning from the SETUP menu Use A or V to highlight the position to be skipped and press OK to select ATV Manual Tuning Channel SETTING UP YOUR TV Press P to select Skip Use A or V to turn Skip on Press OK 4 on the screen indicates a skipped position ATV Manual Tuning Skip On S Y c EE e Press RETURN and repeat from Step 2 or press EXIT Each position has to be individually selected To turn Skip off repeat the procedure for each position Skipped positions cannot be selected by P and Pv or by the controls on the television but can still be accessed by the number buttons on the remote control Sorting positions Channels may be moved and saved to the position of your choice GD Select ATV Manual Tuning from the SETUP menu e9 With the list of channels showing use A or V to highlight the channel you want to move and press P ATV Manual Tuning Pos Channel 10 Station C22 6 T e Use A or V to move through the list to your preferred position As you do so the other channels will move to make room Press lt 4 to save your move Repeat as necessary and then press EXIT DTV Manual Tuning NOTE The content of this menu vari
133. tart Scan and then press OK e Sslsd th Is and ox elect Channels and press OK Manual Tuning for DVB S DTV Settings Channels When Ant Cable Satellite is set to Satellite DTV Manual Subite and Audis Tuning items are as follows PIN Setting DTV Manual Tuning Satellite WEAK AVERAGE STRONG Signal Strength Quality POOR Satellite ASTRA 28 2 E Transponder 1183 Local Time Setting Standby Channel Update off DVB Character Set Standard Dynamic Scan On Frequency 10714 MHz am For your convenience you can jump to specific places Symbol Rate 22000 KS s s in the list by one of two methods Polarisation H Search Option Free to Air Channels TV mum Line No 1 10 Pos Name S Per ABCONE EN Use A or V to highlight an item Satellite Transponder 2 ABC TWO Frequency Symbol Rate Polarisation or Search Option ABC THREE and then press to select the required option 30 CABC Channel Highlight Start Scan and then press OK 40 ABC NEWS 24 54 ABCi 822 AA 823 Start Scan Line Number Jump Use the number buttons 0 9 to input the line number you want to select and then press OK Station Letter Jump Press 44 or PP to jump to the next station name with a different initial letter It is also possible to change the Position number of a particular channel Renumber Press the RED button to renumber the highlighted channel Edit the channel number using the numbe
134. tching TV Do not remove the Dual Band WLAN Adaptor when Network Type is set to Wireless or wireless communication is active There are 3 methods for Wireless Setup Easy Setup WPS If the AP supports WPS this method can be used WPS is an industry standard designed to make connection of wireless LAN equipment and security setup easy WPS will automatically configure all wireless settings Assisted Setup setup by using the AP s notification information Network Name Authentication and Encryption are decided based on information from the AP You will manually set the Security Key Manual Setup manual input of all settings Easy Setup using PBC Push Button Configuration inthe PREFERENCES menu highlight Network Setup and press OK Press W to highlight Wireless Setup and press OK Press or V to highlight Easy Setup and press OK Wireless Setup Assisted Setup Manual Setup Enhanced 11n Press or P to select PBC Press W to highlight Start Scan and press OK Following the on screen instructions push the appropriate button on your AP When a window reporting that the setup is complete appears press OK To cancel searching for the AP Press RETURN while searching for the AP A message will appear and then press to select Yes and press OK Easy Setup using PIN Personal Identification Number In the PREFERENCES menu highlight Network S
135. te before turning off 63 CONTROLS AND FEATURES Digital on screen information Press W to select Also Details of programmes that and Programme Gu ide have started on other channels will be provided Use 4 or P to change the display contents When viewing in digital mode the on screen information and programme guide provide access to programme details for all available channels 1 Press QUICK to open the Quick Menu To display More Information e9 Press W to highlight More Information and press Information ok Gn Press the information screen will appear giving details of the channel and programme currently being On screen Information icons viewed Icon Description mE 8888 mviLondon ASTRA192E 4 4 6 00 Thu 11 Oct on a Skip Audio info O Mono over NL 6 00 8 00 Dual mono HD 16 9 EJ ql AD 18 W E news 15 min left C5 Multichannel Mp Dolby Digital Fell D Dolby Digital L Next Audio Coding Also MLB use two run triple leads AL over NL Audio Descri ption Change Watch TV Audio Subtitle info For Hard of Hearing Press A or W to select the Now Next or Also ee f 16 9 4 3 Video Aspect information guide Teletext To reco
136. tems Operating 4 hours a day and 365 days a year Video Input PAL SECAM NTSC 3 58 4 43 Tested in accordance with IEC 62087 BD Ed 2 0 2008 External connections Di AOWL768 96cm W 29cm D imensions cm cm Input 2I BINSCART y AY approx 40YL768 96cm W 29cm D EXT 2 Input 3 5mm mini jack Pg Cg Pr Cr ight di ion includes fi d Audio shared with Height dimension includes foot stand EXT 3 audio Weight approx 40WL768 20 5kg EXT 3 Input 3 5mm mini jack Video Audio L R 4011758 20 569 1 2 3 4 Input Input PC HDMI 2 Audio Digital Audio Output S PDIF LAN port USB 1 USB 2 port AUDIO terminals are shared with EXT 2 audio HDMI compliant HDCP compliant Enable Content Type INSTAPORT RGB Range supported Mini D sub 15 pin Analog RGB signal 3 5mm mini jack Audio Optical RJ 45 Media Player Interface version USB 2 0 USB class Mass Storage File system FAT12 FAT16 FAT32 and NTFS USB 2 provides access to photos only Operating condition Wireless connection Supplied accessories Optional accessories Temperature 0 C 35 C 32 F 95 F Humidity 20 80 non condensing Standard IEEE 802 11a b g n Host Interface USB2 0 compatible Frequency Range 5 15 5 35 GHz 5 47 5 725 GHz 5 725 5 850 GHz 2 412 2 462 GHz Security WEP64 128 TKIP AES WPA WPA2 PSK WPS None Remote control 2 batteries AA
137. th digital audio and video output For acceptable video or PC signal formats through the HDMI terminals see page 85 LAN port is used to connect the TV to your home network This TV can play digital content stored on a DLNA CERTIFIED product with server function A wide variety of external equipment can be connected to the back of the television therefore the relevant owner s manuals for all additional equipment must be referred to for exact instructions If the television automatically switches over to monitor external equipment return to normal television by pressing the desired programme position button To recall external equipment press to select between DTV EXT 1 EXT 2 EXT 3 HDMI 1 HDMI 2 HDMI 3 HDMI 4 PC or ATV When the external input mode is selected while viewing DTV mode the SCART socket does not output video audio signals CONNECTING YOUR TV Bundling the cables Install the cable clamps and put the cables in these Stand type ial Cable Clamps Wall Mount type 10 CONNECTING YOUR TV Connecting an HDMI or DVI device to the HDMI input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI Digital Visual Interface source device This input is designed to accept HDCP High Bandwidth Digital Content Protection programme material in digital for
138. the connected device two selection screens Digital Video Camera and Other will be displayed when the device is selected When Digital Video Camera is selected a list containing only AVCHD content will be displayed Equipment Root AVCHD files Do not edit Other is for a conventional List NOTE If you change the structure or modify any of the folder or file names under the PRIVATE folder the list display as well as movie playback may not function correctly During playback Press IMI to pause You can move to the desired replay position by pressing gt during PAUSE DMS only PAUSE or operations during PAUSE may not be available depending on the contents DMC or DMS To resume normal playback press PLAY P To play in fast reverse or fast forward directions press 44 or PP during playback Each time you press 44 or PP the playback speed will change To locate a specific file press 44 or PPI repeatedly Press to display the file status information content number movie title progress time etc NOTE The information may not be correctly displayed depending on the contents DMC or DMS During playback you can adjust the PICTURE Picture Size and SOUND menu functions from the Quick Menu To select subtitle and audio languages Press SUBTITLE repeatedly to select your preferred subtitle language Press CDI I repeatedly to select your preferred audio l
139. the HDMI1 4 standard When set to On the TV will automatically adjust settings according to the content type data sent from the connected HDMI device INSTAPORT On This feature reduces the lag time when switching HDMI sources RGB Range Auto This feature adjusts RGB full range signal automatically When Limited is selected RGB signal is output in the range from 16 to 235 When Full is selected RGB signal is output in the range from 0 to 255 NOTE If your HDMI connection is capable of 1080p and or your television is capable of refresh rates greater than 50Hz or supports Deep Colour you will need a Category 2 cable Conventional HDMI DVI cables may not work properly with this mode All of the above HDMI settings need proper HDMI source devices If the HDMI source products do not support these features the television may not work properly by activating these features 73 CONTROLS AND FEATURES Digital Audio Output When connecting a surround sound amplifier to the digital audio output Sony Philips Digital Interface Format S PDIF the following options can be selected PCM this mode outputs PCM format to the digital audio output socket Auto this mode outputs Dolby Digital if available or PCM to the digital audio output socket Dolby Digital Dolby Digital Dolby Digital Plus Dolby Digital MPEG PCM HE AAC Dolby Digital In the PREFERENCES menu press V to highlight AV Connec
140. tion and press OK Press or V to highlight Digital Audio Output AV Connection Input Labeling PC HDMI 2 Audio Side Shared Audio HDMI 2 Audio Colour Decoding Digital Audio Output Press or P to select PCM or Auto 74 CONTROLS AND FEATURES Using REGZA LINK This is a new feature that uses CEC technology and allows you to control Toshiba REGZA LINK compatible devices from the television remote control via HDMI connection page 12 When the Enable REGZA LINK item in the REGZA LINK Setup menu is set to On individual functions also set to On will be activated Enable REGZA LINK Press MENU and 4 to select the PREFERENCES menu Press W to select REGZA LINK Setup and press OK Press W to highlight Enable REGZA LINK and then press or P to select On REGZA LINK Setup Enable REGZA LINK TV Auto Power Auto Standby Amplifier Control Speaker Preference TV Speakers NOTE If you set Enable REGZA LINK to Off all other items will be grayed out TV Auto Power The TV Auto Power setting allows the television to be automatically switched on if a REGZA LINK device is turned on 1 In the REGZA LINK Setup menu press V to highlight TV Auto Power Press or P to select On Off Auto Standby When Auto Standby is enabled the television when switched off will automatically switch off standby mode all connected REGZA LINK equipment am In the REGZA LINK Setup menu press V
141. tional Access Module and card These are purchased from a service provider and allow additional subscription broadcasts to be viewed For information see a service provider 1 Insert the CAM and card into the Common Interface Slot following the instructions provided with the CAM box will appear on screen to confirm that the CAM has been inserted 2 In the DTV Settings menu press A or V to select Common Interface and press OK Details of the CAM should now be available NOTE Software update of a CI Plus CAM may occur automatically if instigated by the broadcaster This could cause the cancellation of any Reminders Recordings during this process Some Cl or CI CAM may not be supported Cl operation is not guaranteed except for Canal Ready services on suffix FC models 68 CONTROLS AND FEATURES Software Upgrade and Licences Auto Upgrade When Auto Upgrade is set to On the television will automatically upgrade while in standby if new software is available From the SETUP menu press A or W to select Software Upgrade and press OK Press A or V to select Over the air Upgrade and press OK Press A or V to select Auto Upgrade Use or P to select On or Off Searching for New Software If preferred software upgrades can be searched for manually using Search for New Software 1 In the Software Upgrade menu select Over the air Upgrade and then press A or V to select Search for N
142. to select a point and press or V to adjust the level Backlight Adjustment Pro Backlight Control Level Press OK to fix the adjustment To cancel the adjustment when selecting a point select Cancel and press OK To return the adjustments of all points to the factory defaults select Reset and press OK CONTROLS AND FEATURES Active Backlight Control When Active Backlight Control is activated it will automatically optimize the backlighting levels for dark scenes In the Advanced Picture Settings menu press W to select Active Backlight Control Press or P to select On or Off Black White Level Black White Level increases the strength of dark areas of the picture to improve the definition 1 In the Advanced Picture Settings menu press W to select Black White Level Press to adjust the level The effect depends on the broadcast and is most noticeable on dark colours Static Gamma The static gamma feature allows you to adjust the levels of black in the picture an In the Advanced Picture Settings menu press V to select Static Gamma Press P to adjust the level MPEG NR Noise Reduction When watching a DVD the compression may cause some words or picture elements to become distorted or pixelated Using the MPEG NR feature reduces this effect by smoothing out the edges Gn In the Advanced Picture Settings menu press V to select Noise Reduction and press
143. tp vod divx com ABOUT DIVX VIDEO DivX is a digital video format created by DivX Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play DivX Video on Demand VOD content To generate the registration code locate the DivX VOD section in the device setup menu Go to vod divx com with this code to complete the registration process and learn more about DivX VOD 57 CONTROLS AND FEATURES Playing music files on a DLNA CERTIFIED Server or USB device You can listen to music from a list of available files Music list example Jd Music Sort Title jd mi Folder Total Time 216 WWWWWWWWW 00 00 00 97 Y 00 00 00 00 00 00 QUICK Features Page RETURN Back Press W to select file or folder PA buttons can be used to page up down the music list when there are more files than will fit onto one screen e9 When you select a folder press OK to move to the next layer Press RETURN to move back to the previous layer With the desired file selected press OK or PLAY P to start playback NOTE On preview screen if you highlight the file without pressing OK the content is played on a preview screen When OK is pressed it is played in full screen mode for DMS
144. urrent video signal e9 Press W to select 4 3 Stretch and then press 1 In the PICTURE menu press W to select Control to select On or Off Visualization and press OK The histogram window Blue Screen Control Visualization When Blue Screen is selected the screen will turn blue and the Distibution sound will be muted on analogue channels and external input modes when no signal is received NOTE Some external input sounds may not be muted Pixel GD inthe PREFERENCES menu press to select Blue Screen pd Press or P to select On or Off Control Curve e Press RETURN to return to the previous menu 40 CONTROLS AND FEATURES Picture Position The picture position may be adjusted to suit personal preference and can be particularly useful for external inputs inthe PREFERENCES menu highlight Display Settings and press OK e In the Display Settings menu highlight Picture Position Display Settings Auto Format On 4 3 Stretch off Picture Position Press OK to view the options available for the picture format that has been selected Press and V to select an option and then lt or gt to adjust the settings The options differ depending on the currently selected widescreen format and the input signal In Cinema mode Picture Position Horizontal Position Vertical Position To return to the original factory settings select Reset in the Picture Positio
145. version from SSL Version to use SSL2 0 SSL3 0 TSL1 0 A content confirmation of the certification and a setting effect non effect can be done in Root Certificates and CA Certificates shown below Cookies Accept all Cookie is received and it records in this TV Reject all Cookie is not received Prompt before accepting When Cookie is received a message window will be displayed Delete Deletes all recorded Cookies Cookies Cache Use cache When the check is applied to this cache is used Delete All Cache Data Deletes all the cache preserved in the television Browser Displays the information on a browser Information NOTE Cookie is the technical information that a website leaves in this TV so that the website will recognize you when you use it again Cache is a system used to shorten the display time by checking the past data preserved in this television when a page that you viewed before is seen again To confirm Root Certificates or CA Certificates Press A or V to select Security in step3 in Setting other features Press V P to select Root Certificates or CA Certificates and press OK Press A V to select the desired certificate When OK is pressed a detailed information window will appear When the BLUE button is pressed Disable or Enable bar will appear It changes whenever BLUE button is pressed Press RETURN 52 Using the
146. vice For the setup shown above you will need three HDMI cables NOTE If several devices are connected the REGZA LINK feature may not operate properly For proper operation it is recommended that you use HDMI cables with the HDMI Logo HI This function is available when one PC and one AV amplifier are connected separately However it may not operate properly if the PC is connected via the AV amplifier 12 Before controlling the device s After completing the above connections set the REGZA LINK Setup menu as you desire see page 75 The connected devices must also be set For details see the operation manual for each device The REGZA LINK feature uses CEC technology as regulated by the HDMI standard This feature is limited to models incorporating Toshiba s REGZA LINK However Toshiba is not liable for those operations Refer to individual instruction manuals for compatibility information CONNECTING YOUR TV Connecting a computer With either an RGB PC or an HDMI connection you can watch your computer s display on the television and hear the sound from the television s speakers To connect a PC to the RGB PC terminal When connecting a PC to the RGB PC terminal on the television use an analogue RGB 15 pin computer cable and a PC audio cable for the PC HDMI 2 AUDIO socket Select PC from the PC HDMI 2 Audio options in the AV Connection menu located in the PREFERENCES menu the
147. xt page PA Pv buttons can be used to page up down the photo list when there are more photos than will fit onto one screen When the PA Pv buttons are pressed the highlight shall be on the photo at the top left of Previous Next list When you select a folder press OK to move to the next layer Press RETURN to move back to the previous layer Press OK to view the selected photo in Single View mode NOTE When the TV is used as a DMR this feature is not available 54 CONTROLS AND FEATURES Single View In this mode only files located in the selected directory will be displayed This view allows you to change the photo content manually When moving from Multi View to Single View the currently selected photo will be displayed 1 Press to view the next photo Press view the previous photo Press to rotate the image 90 clockwise Press W to rotate the image 90 counterclockwise to display file status information file number photo title date and time taken resolution etc NOTE The information may not be correctly displayed depending on the content DMC or DMS Slide Show This view allows you to watch a slide show of your photos In this mode only files located in the selected directory will be played Press lt P to view the previous next photo Press A or V to rotate the photo Press to display file status information To set Interval Time and Repeat s
148. y not be able to be used To cancel the Network Connection Test Press RETURN while searching for the Internet connection Using the software keyboard You can enter text by using the Software Keyboard The Software Keyboard window will appear when you press OK on a field that accepts character input To enter text using the software keyboard 1 Highlight the desired character on the on screen software keyboard e Press OK Repeat steps 1 and 2 until you have entered all desired text Press the BLUE button to close the software keyboard and return to the previous screen NOTE If RETURN is pressed changes are not saved and the software keyboard window is closed The text will remain as it was before starting the keyboard Input operation on the remote control Button Description OK Inputs the selected character 0 9 Inputs the number directly 4 Moves the character highlight lt lt gt gt Moves the cursor Ke Moves the cursor to the head of a character string Moves the cursor to end of a character string RED Deletes 1 character to the left of the cursor GREEN Cycles through upper case lower case numbers and symbols if available YELLOW Chooses an accented version of the current letter if applicable BLUE Saves changes and closes the Software Keyboard window RETURN Closes the Software Keyboard window without saving c

Toshiba YL768/40 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents