Home

Toshiba TL966/32 User's Manual

1. CONTROLS AND FEATURES General controls Quick Menu Selecting channels The Time Display analogue only Stereo and Bilingual transmissions Using 3D functions Using the 3D glasses Viewing 3D images Switching display mode or selecting 3D format Setting the auto start mode Adjusting 2D to 3D Depth Setting the 3D PIN code Setting 3D Start Message Setting 3D Lock Setting 3D Timer Lock Setting Enable 3D Timer Displaying 3D Important Info Switching left and right images Sound controls Volume controls and sound mute Balance Bass Treble Voice Enhancement Dynamic Bass Boost Stable Sound Dynamic Range Control Audio Level Offset TV Speakers On Off Headphone Settings Audio Description Widescreen viewing Picture controls Picture Mode Picture preferences Reset ColourMaster Base Colour Adjustment Colour Temperature Auto Brightness Sensor Active Backlight Control Black White Level MPEG NR Noise Reduction DNR Digital Noise Reduction Active Vision Resetting the advanced picture settings Automatic Format Widescreen 4 3 Stretch Blue Screen Picture Position Picture still Using your home network Setting up the Network Wireless Setup Advanced Network Setup DNS Setup Network Connection Test Using the software keyboard Network Device Setup External Control Setup Device N
2. Sorting positions Channels may be moved and saved to the position of your choice Select ATV Manual Tuning from the System Setup menu With the list of channels showing use A or W to highlight the channel you want to move and press P ATV Manual Tuning Pos Channel Station 10 c7 40 C22 C25 C28 exit Use A or W to move through the list to your preferred position As you do so the other channels will move to make room Press to save your move Repeat as necessary and press EXIT DTV Manual Tuning NOTE This feature varies depending on the Ant Cable Satellite setting Manual Tuning This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known oO Select DTV Manual Tuning from the System Setup 26 menu and press OK DTV Manual Tuning Antenna f WEAK AVERAGE STRONG Signal Strength Quality GOOD Channel 67 Frequency 842 0 MHz Bandwidth 8 MHz Start Scan Enter the multiplex number using the number buttons or use or P to adjust the number up or down 3 Highlight Start Scan and press OK The television will automatically search for that multiplex DTV Manual Tuning Antenna 0 New Channels Total 6 New a Name ABC ONE ABC TWO ABC THREE ABC NEWS 24 ABCi When the multiplex is found any channels that are not currently in the channel list will be added and the channel information at the top of the
3. 21 From the System Setup menu you can add the satellites that you Satellite Settings wish to tune and configure detailed settings for each one individually To add a satellite Press MENU 4 to highlight Setup icon Press A P to highlight System Setup icon and press OK Press to select Satellite Settings and press OK Satellite Settings Switch Type LNB Power Satellite ASTRA 19 2 E Press W to highlight a new line to add an another satellite and press OK Press W until the required satellite is displayed and press OK To delete a satellite NOTE In the Satellite Settings menu press A or W to select the satellite you want to delete Press the RED button A confirmation window will appear Press or P to select Yes and press OK It is not possible to delete position No 1 SETTING UP YOUR TV To edit the satellite settings In the Satellite Settings menu press A to highlight Switch Type o Press or P to select None ToneBurst DiSEqC 2way or DiSEqC 4way as your satellite switch type Press W to highlight LNB Power and press or to select On or Off To add a transponder oO In the Satellite Settings menu press A or W to highlight the line you want to edit and press OK ASTRA 19 Press the GREEN button The Transponder Settings screen will appear Transponder Settings Frequency Polarisation Symbol Rate Aa na NAD WH 3 Press A to highlight
4. DO NOT allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids such as vases to be placed on the equipment DO NOT place hot objects or naked flame sources such as lighted candles or nightlights on or close to equipment High temperatures can melt plastic and lead to fires WARNING To prevent the spread of fire keep candles or other open flames away from this product at all times DO NOT use makeshift stands and NEVER fix legs with wood screws To ensure complete safety always fit the manufacturer s approved stand bracket or legs with the fixings provided according to the instructions DO NOT leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode Switch off by withdrawing the plug and make sure your family knows how to do this Special arrangements may need to be made for people with disabilities DO NOT continue to operate the equipment if you are in any doubt about it working normally or it is damaged in any way switch off withdraw the mains plug and consult your dealer WARNING Excessive sound pressure from earphones or headphones can cause hearing loss ABOVE ALL NEVER let anyone especially children push or hit the screen and cabinet back or push anything into holes slots or any other openings in the case These actions will damage screen or internal parts NEVER
5. To select USB HDD and Partition for Recording Press MENU 4 P to highlight Setup icon Press A 4 P to highlight Preferences icon and press OK Press A or W to select Recording Setup and press OK Preferences Recording Setup REGZA LINK Setup Network Setup Guide Type Network Device Setup Teletext Network Lock Panel Lock Press A or W to select Select Device and press OK USB HDD and Partition list will be appear If USB HDD is partitioned by PC several partitions will be displayed Select USB HDD and Partition you want to recording To set the recording time for One Touch Recording Press MENU 4 P to highlight Setup icon Press A 4 P to highlight Preferences icon and press OK Press A or W to select Recording Setup and press OK CONTROLS AND FEATURES Press A or W to select One Touch Recording Time Recording Setup Select Device One Touch Recording Time 4 Programme End Time gt TimeShift Size 512 MB None Start Padding Time End Padding Time None Device Test Format Device Press or P to select the recording time You can set the Programme End Time in 30 minute increments in the range of 30 minutes to 360 minutes To select the TimeShift Size In the Recording Setup screen press A or W to select TimeSift Size Press or P to select 512MB 1GB 2GB or 4GB and press OK To use TimeShift recording Time Shift recording allows you to pause live TV for a fixed p
6. HDMI cable 11 CONNECTING YOUR TV REGZA LINK connection You can control the basic functions of connected audio video devices using the television s remote control if you connect a REGZA LINK compatible AV amplifier or playback device For an explanation of setup and operations see pages 77 78 the back of your television AV amplifier Playback device Hei m For the setup shown above you will need three HDMI cables Before controlling the device s NOTE After completing the above connections set the REGZA If several devices are connected the REGZA LINK feature LINK Setup menu as you desire see page 77 may not operate properly The connected devices must also be set For details see the For proper operation it is recommended that you use HDMI operation manual for each device cables with the HDMI Logo HEITI The REGZA LINK feature uses CEC technology as regulated This function is available when one PC and one AV amplifier by the HDMI standard are connected separately However it may not operate This feature is limited to models incorporating Toshiba s properly if the PC is connected via the AV amplifier REGZA LINK However Toshiba is not liable for those operations Refer to individual instruction manuals for compatibility information 12 CONNECTING YOUR TV Connecting a computer With either an RGB PC or an HDMI connection you can watch your computer s display on the
7. Mode Description Off Files in the same folder are played back once All Files in the same folder are repeatedly played back The same file is repeatedly played back NOTE When in the DMS and Multi View modes this feature cannot be used Press BACK To select a music file from Play List While playing a music file you can select a different music file from the Play List Press QUICK to open the Quick Menu Press A or W to select Play List and press OK The Music List will appear To display the file status information Press A or W to select a file name Press during playback The information will be displayed on the bottom of the screen NOTE The information may not be correctly displayed depending on the contents or DMS Press again to remove the information To close the Music Player File Compatibility Press EXIT See page 88 CONTROLS AND FEATURES Other features Panel Lock Panel Lock disables the buttons on the television All buttons on the remote control can still be used Press MENU 4 to highlight Setup icon Press A 4P to highlight Preferences icon and press OK Press A or W to select Panel Lock Press or P to select On Preferences Recording Setup REGZA LINK Setup Network Setup Guide Type Network Device Setup Teletext Network Lock Panel Lock When Panel Lock is On a reminder will appear when the buttons on the television are pressed If
8. SVGA 800 x 600 56 250Hz 35 156kHz 36 000MHz 60 317Hz 37 879kHz 40 000MHz 72 188Hz 48 077kHz 50 000MHz 75 000Hz 46 875kHz 49 500MHz e XGA 1024 x 768 60 004Hz 48 363kHz 65 000MHz 70 069Hz 56 476kHz 75 000MHz e 75 029Hz 60 023kHz 78 750MHz e WXGA 1280 x 768 59 995Hz 47 396kHz 68 250MHz e 59 870Hz 47 776kHz 79 500MHz e 74 893Hz 60 289kHz 102 250MHz e 1360 x 768 60 015Hz 47 712kHz 85 500MHz e SXGA 1280 x 1024 60 020Hz 63 981kHz 108 000MHz e 75 025Hz 79 976kHz 135 000MHz 87 INFORMATION Media Player Supported Format Media Media File Video codec Audio codec USB DMS Note Player Format Extention Photo JPEG jpg JPEG yes yes lt USB gt jpeg Data compatibility JPEG Exif ver 2 2 Maximum viewable resolution JPEG 15360 x 8640 Base line 1024 x 768 Progressive MPO mpo MPO yes no BMP 9600 x 6400 Maximum number of files 1000 folder lt DMS gt Data compatibility JPEG Exif ver 2 2 BMP bmp BMP yes no Maimun viewable resolution 1024 x 768 Maximum number of files 1000 folder Some files may not be played depending on file size Movie AVI avi MPEG 2 MPEG 1 2 Layer2 yes no lt USB gt MPEG 4 part2 MPEG 1 2 Layer3 Maximum number of H 264 MPEG 4 AVC Dolby Digital AC 3 files 1000 folder DivX L PCM Maximum viewable Xvid ADPCM resolution MPEG 2 4 LC AAC Motion JPEG 640 x 480 MPEG 4 HE AAC Other 1920 x 1080 MPEG 2 PS
9. To check the battery level When the 3D glasses are turned on the behavior of power light is different e Charged Lights up for 2 seconds Low charge Blinks 5 times CAUTION Danger of explosion if battery is incorrectly disposed of CONTROLS AND FEATURES Viewing 3D images Incoming video signals can either be in 2D or 3D format A 2D signal can be viewed in either 2D or 3D and 3D can be viewed in either 2D or 3D If the TV can detect the fact that a signal is 3D it can change to 3D mode automatically see Setting the auto start mode on page 33 Otherwise you can change the viewing mode using the 3D button Finally the format of the 3D signal can be either Side by Side SBS or Top and Bottom TB You may have to choose the correct format if the TV can not detect it automatically see Switching display mode or selecting 3D format Moreover you can change 2D images to 3D images by pressing the 3D button when viewing in 2D NOTE When 3D format signal is not received display mode is not switched to 3D If appropriate mode and format are not selected 3D image is not correctly displayed There will be restrictions on the Picture Size settings for 3D Mode and 2D Mode There are individual differences in perception of 3D images When viewing 3D images wear the 3D Glasses The 2D to 3D conversion function is activated and controlled by you according to your personal preferences The 2D to
10. mpg MPEG 1 Video MPEG 1 2 Layer2 yes yes mpeg MPEG 2 Video MPEG 1 2 Layer3 Some files may not be Dolby Digital AC 3 played L PCM MPEG 2TS_ ts MPEG 2 Video MPEG 1 2 Layer2 yes yes trp MPEG 1 2 Layer3 tp Dolby Digital AC 3 H 264 MPEG 4 AVC L PCM no VC 1 WMV9 MPEG 4 LC AAC MPEG 4 HE AAC MPEG 2 VOB vob MPEG 1 Video MPEG 1 2 Layer2 yes no MPEG 2 Video MPEG 1 2 Layer3 Dolby Digital AC 3 L PCM MOV mov H 264 MPEG 4 AVC MPEG 1 2 Layer3 yes no MPEG 4 part2 MPEG 2 4 LC AAC MP4 mp4 H 264 MPEG 4 AVC MPEG 4HE AAC yes no m4v MPEG 4 part12 14 ASF asf VC 1 WMV9 WMA7 8 9 Std yes no wmv WMA9 Pro DivX divx DivX 3 4 5 6 MPEG 1 2 Layer2 yes no div MPEG 1 2 Layer3 Dolby Digital AC 3 Xvid xvid Xvid PCM ADPCM 88 INFORMATION Media Media File Video codec Audio codec USB DMS Note Player Format Extention Movie MKV mkv MPEG 1 Video MPEG 1 2 Layer2 yes no MPEG 2 Video MPEG 1 2 Layer3 MPEG 4 part2 Dolby Digital AC 3 H 264 MPEG 4 AVC L PCM MPEG 2 4 LC AAC MPEG 4 HE AAC RealMedia rm RealVideo 8 9 10 Dolby Digital AC 3 yes no rmvb MPEG 2 4 LC AAC Flash Video flv Sorenson H 263 FLV1 MPEG 1 2 Layer3 yes no FLV1 swf H 264 MPEG 4 AVC MPEG 2 4 LC AAC L PCM ADPCM 3GPP 3gp MPEG 4 part2 MPEG 2 4LC AAC yes no H 264 MPEG 4 AVC AMR Motion JPEG avi JPEG L PCM yes no mp4 ADPCM mkv Music MP3 m
11. or 120 minutes To cancel the timer select Off Displaying 3D Important Info In the Preferences menu press A or W to select 3D Setup and press OK Press A or W to select 3D Important Info and press OK Switching left and right images The left and right eye shutter timing of the glasses can be swapped If 3D images look blurred switch the left and right sides 34 of the 3D image Press QUICK on the remote to open the Quick Menu Press A or W to select 3D Settings and press OK Press A or W to select Left and Right Image Press or to select Swapped CONTROLS AND FEATURES Sound controls Volume controls and sound mute Volume Press lt 1 or lt 1 to adjust the volume Sound Mute Press mK once to turn the sound off and again to cancel Dual Ifa programme or film is being broadcast with a soundtrack in more than one language the Dual feature allows selection between them Press MENU lt P to highlight Setup icon DB bress amp P to highlight Sound icon and press OK Press A or W to select Dual and press 4orP to choose between Dual 1 or Dual 2 Sound Dual Balance Advanced Sound Settings Stable Sound Dynamic Range Control Audio Level Offset TV Speakers Headphone Settings Balance 1 In the Sound menu press A or W to select Balance and press or gt to emphasize left or right speaker balance Bass Treble oO In the Sound menu press A or W to select Advanced Sound Se
12. 1 news 15 min left Also MERCIAN iple leads AL over NL change Press A or W to select the Next and press OK The Edit Timer menu will appear Edit Timer The Daily Politics EE 2 CABC Channel 11 30 12 30 Tue 26 Apr 10 50 Tue 26 Apr Timer Type Recording Set Timer Press A or W to highlight Timer Type and press or P to select Recording Press A or W to highlight Set Timer and press OK The ORANGE LED will be lit To check edit or delete scheduling information You can check edit or delete scheduling information Press MENU 4 P A 4 P to highlight TV Programmes Programme Timers icons and press OK Programme Timers screen will appear Recording List Depending on the transmitter information the programme broadcast time or other information may not be correctly displayed in the recording list The programme does not appear in the recording list immediately at the start of recording but appears a few minutes after recording starts Up to 500 programmes can be displayed in the recording list If the channel settings are changed the digital channel number or other information may not appear correctly in the recording list CONTROLS AND FEATURES As the displayed programme time is calculated from the actual recording information it may not match the recording time on the USB HDD To check a schedule Press A or V on the Programme Timers screen to check the s
13. 3D conversion function is meant for enjoyment of 2D home video and other 2D content you create in 3D according to your personal preferences The 2D to 3D conversion function is not intended for use with pre recorded 2D copyrighted content owned by a third party unless the copyright owner has given direct or indirect permission or unless applicable law permits such use 31 Switching display mode or selecting 3D format There are four modes for watching TV Mode Description 3D Displays 3D images 2D Changes 3D images to 2D 2D to 3D Changes 2D images to 3D Native Displays a received signal format as it is 3D format select f a right and left images are same in Native mode select SBS f a top and bottom images are same in Native mode select TB 3D formats are the following 3D format Description Side by Images for the left and right eyes Side SBS are positioned side by side Top and Images for the left and right eyes Bottom are positioned at the top and TB bottom of the screen Frame Image for the left and right eyes for Packing two frames are positioned at the FP top and bottom of the screen This format cannot be selected manually The 3D button s operation The behaviour of 3D when viewing in Native mode is different depending on the input mode Depending on the input mode the screen for selecting 2D or 3D is di
14. AP for IEEE 802 1 1n is used when Encryption is set to WEP or TKIP the Speed value might be low It is recommended that Encryption be changed to AES see Manual Setup on page 43 Notes on wireless LAN environment The function of all IEEE802 11 is not supported The ad hoc mode is not supported It is recommended to use IEEE 802 11a or IEEE 802 11n on 5 GHz for audio and SD video streaming It is recommended to use IEEE 802 11n on 5 GHz for HD video streaming It is recommended that the encoding rate for streaming video content is 20 Mbps or less It is not recommended to use 2 4 GHz for audio and video streaming Content playback may be interrupted by various surrounding interference Advanced Network Setup NOTE When the DHCP function of the router connected with this TV is On you can set Auto Setup to On or Off This should usually be set to On When the DHCP function of the router is Off set Auto Setup to Off and set the IP Address manually IP Address Setup Auto Setup In the Preferences menu press A or W to select Network Setup and press OK Press A or W to select Advanced Network Setup and press OK Network Setup Network Type Wireless Setup Advanced Network Setup Press A or W to select IP Address Setup and press OK Advanced Network Setup IP Address Setup DNS Setup MAC Address 45 Highlight Auto Setup and press or to select On IP Address Setup Auto Setup IP
15. And Conditions ij Terms And Conditions Press A or W to select Terms And Conditions The License Terms and Conditions will be displayed Search screen Recent Searches o Search For gt 2 Back Space Clear c ORecent Searches button Pressing OK will take you to the Recent Searches screen Search input area displays what you are typing Pressing Search For will conduct the search and take you to Search Results Search keyboard NOTE Toshiba does not take responsibility for the accuracy of content displayed Service Information may not be displayed or there may be little service information displayed depending on the area or the kind of broadcast The MediaGuide can only be used when your TV is connected to the internet Starting and operation of this service may take time Software update may be needed in order to use this service This service does not support all languages MediaGuide is a service of Rovi Corporation During use of the MediaGuide usage information will be notified to the Rovi server to ensure continued efficient operation of the guide CONTROLS AND FEATURES Rovi Corporation and or its subsidiaries and related affiliates are not in any way liable for the accuracy or availability of the program schedule information or other data in the Rovi Guide system and cannot guarantee service availability in your area In no event shall Rovi Corporation and or its related affiliates
16. Before downloading software Configure your TV to connect to the Internet NOTE While the upgrade is being performed you will not be able to watch the TV 1 In the System Setup menu press A or to select Software Upgrade and press OK 2 Press A or W to select Network Upgrade and press OK NOTE If the network is not available a warning message will appear 3 The TV software upgrade will start when download succeeds Software Licences The licences for the software used in this television are available for viewing 1 In the System Setup menu press A or W to select Software Licences and press OK A screen will appear displaying all the licensing information required for the televisions software 73 CONTROLS AND FEATURES System Information and Reset TV System Information This feature can be used to check the version of software currently installed When in DTV mode it includes additional diagnostic information such as signal strength signal quality centre frequency modulation etc oO In the System Setup menu press A or to select System Information Press OK to display the System Information System Information TOSHIBA 2012 6 8 05 1 Jan 19 2012 53 5 73 5 MBOOT Version XXXxxxxx MFC Version xxxxxx AVERAGE For information about the signal quality of a particular multiplex press A or W to select that multiplex O Press OK for a screen showing detailed tech
17. Fine Tuning 1 I FAS Fee C8 25 S95 Why don t the controls of the television work Check that Panel Lock is not On Why doesn t the remote control work Check that the batteries aren t dead or inserted incorrectly Why is the digital channel locked The channel has been locked in Channel Options see Digital settings Channel Options section Why are some of the digital subscription channels unavailable Your subscription needs upgrading Contact your service provider Why is the soundtrack in English when a different audio language has been selected The programme is currently being broadcast with an English soundtrack only Why is there incorrect or no sound when in DTV mode Press CDI I to ensure the hard of hearing option has not been selected PROBLEM SOLVING SB gt S rz zo BOBO 2626 What is DVB T Digital Video Broadcast via an aerial antenna What is DVB C Digital Video Broadcast via a cable connection How are DTV radio channels selected Select from All Channel List LIST button What can be done if the PIN number has been forgotten Use the Master PIN code of 1276 then change to a number of your choice Select Parental PIN Setup from the DTV Settings menu to enter PIN Ensure that no one else can use the Master PIN by removing the Owner s Manual Why are there vertical stripes on the screen when in PC mode The Sampling Clock may need adjustment Selec
18. Intel Wireless Display Intel WiDi is supported on this TV if this functionality is not implemented at time of purchase it will be made available via firmware update in mid 2012 If your TV is connected to the internet firmware will be automatically made available If your TV is not connected to the internet you can download the latest version of firmware from www toshiba om net firmware php Some features are limited due to local legislation and may not be available in all countries INSTALLING YOUR TV Safety Precautions This equipment has been designed and manufactured to meet international safety standards but like any electrical equipment care must be taken to obtain the best results and for safety to be assured Please read the points below for your own safety They are of a general nature intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased Air Circulation Leave more than 10cm clearance around the television to allow adequate ventilation This will prevent overheating and possible damage to the television Dusty places should also be avoided Heat Damage Damage may occur if the television is left in direct sunlight or near a heater Avoid places subject to extremely high temperatures or humidity Place in a location where the temperature remains between 5 C min and 35 C max Mains Supply The mains supply required for this equip
19. Native Using the special functions to change the size of the displayed image i e changing the height width ratio for the purposes of public display or commercial gain may infringe on copyright laws 38 CONTROLS AND FEATURES Picture controls Most of the picture controls and functions are available in both digital and analogue modes PLEASE NOTE Features not available will be grayed out Picture Mode This television offers the choice of personalising the picture style AutoView Dynamic Standard Hollywood 1 Hollywood 2 Store Game and PC are preset options and affect many features settings within the television NOTE Because the AutoView mode automatically adjusts picture settings based on ambient light conditions and input signal content the Auto Brightness Sensor menu is grayed out when it is selected Game mode is available in external input mode other than aerial input When you select Game mode suitable widescreen formats will be selected PC mode is available in RGB PC input mode or HDMI input mode press MENU lt P to highlight Setup icon B Pressa 4P to highlight Picture icon and press OK Press A or W to select Picture Mode Picture Picture Mode Standard Reset Backlight Contrast Brightness Colour Tint Sharpness O Press or P to select the picture mode you prefer and press OK NOTE The picture mode you select affects the current input only You can select a diffe
20. Not all services or content may be available on this product in your country or with your language In order to experience the full capabilities of this product fully compatible devices may be required For more information visit http www toshibaplaces com about This service may be forcibly blocked according to the situation of CSP service 56 Using Hybrid TV Standard if available Hybrid TV Standard enables the TV to receive HbbTV services TV services which support this feature often show press RED on the screen NOTE You need to configure a home network before using this feature see page 14 Press MENU 4 to highlight Setup icon Press A 4P to highlight Preferences icon and press OK Press W to select Hybrid TV Standard Press or to change from Disabled to Enabled When changing from Disabled to Enabled a Network Connection Test is performed If the result is OK then the setting changes to Enabled If not the setting remains Disabled When press RED is indicated on the screen press the RED button to access HbbTV service site and then press AW4P to select the desired contents NOTE This service is not available outside Germany The HbbTV service indication or required key operations may not be possible depending on the service contents In this case set the Hybrid TV Standard setting to Disabled Toshiba makes no warranties representations or assurances about the content CON
21. P buttons Vertical or Horizontal scrolling NOTE Using the zoom function while in the Slide Show mode will stop the slideshow and zoom in out the photo Selecting the Playback Mode USB only You can view 3D photos in 3D and you can also view 2D photos in 3D Select the playback mode from the Quick Menu or switch playback modes using the 3D button on the remote control The current Playback Mode is displayed at the top left of the list mode To select the playback mode from the Quick Menu Press QUICK to open the Quick Menu in Multi View mode Press A or W to select Playback Mode and press OK Press A or W to select 2D Mode 3D Mode 1 or 3D Mode 2 2D Mode All photos are displayed in 2D 3D Mode 1 3D photos are displayed in 3D and 2D photos in 2D 3D Mode 2 All photos are displayed in 3D 2D photos are converted and displayed in 3D and 3D photos are displayed in 3D To switch playback modes using the remote control Press 3D while in Single View mode The mode switches between 2D Mode 3D Mode 1 and 3D Mode 2 each time 3D is pressed CONTROLS AND FEATURES To select a photo from Play List While in the Single View mode or Slide Show mode you can select a different photo from the Play List 1 Press QUICK to open the Quick Menu from Single View mode or Slide Show mode 2 Press A or W to select Play List and press OK The Photo List will appear 3 Press A or W to select a file name To clos
22. Protection programme material in digital form from EIA CEA 861 D compliant consumer electronic devices such as a set top box or DVD player with HDMI output For acceptable video signal formats see page 87 NOTE Supported Audio format Linear PCM Dolby Digital AC 3 sampling rate 32 44 1 48kHz To connect an HDMI device Connect an HDMI cable type A connector to the HDMI terminal For proper operation it is recommended that you use an HDMI cable with the HDMI Logo HIMNI If your HDMI connection is capable of 1080p and or your television is capable of refresh rates greater than 50Hz you will need a Category 2 cable Conventional HDMI DVI cable may not work properly with this model HDMI cable transfers both video and audio Separate analogue audio cables are not required see illustration the back of your television HDMI cable gt HDMI device VIDED AUDI Praca oe Oo To view the HDMI device video press the button to select HDMI 1 HDMI 2 HDMI 3 or HDMI 4 mode HDMI s ARC Audio Return Channel feature This feature enables the audio signal of the TV to be sent to the AV amplifier via the HDMI cable It will not be necessary to connect a cable from the audio output of the TV to the audio input of the AV amplifier to reproduce the audio received from the tuner of the TV through the AV amplifier the back of your television AV amplifier that supports ARC e
23. REGZA LINK Setup Network Setup Guide Type Network Device Setup Teletext Network Lock To unlock the Network Press or P to select On Select Off in step 4 above 71 Digital settings Channel Options Selecting favourite channels From the Quick Menu Channel Options menu it is possible to create a list of the digital channels that are watched most Soeaos 8 G Press LIST lt 4 to select the Favourite Channel list Select a channel you want to add to your favourite list Press QUICK to open the Quick Menu Press W to select Channel Options and press OK Press P to select the favourite list Fav Channel Options Fav gt Q Press OK to select the ones required A tick will appear in the box as they are selected Repeat steps 1 through 5 for other channels When all favourites have been selected press EXIT Favourite Channel List Press LIST to display Channel List Each time you press or All Channels TV Channels Radio channels Text channels or Favourites is selected in order Press or to select Favourites The number of favourites available depends on how many lists have been created Channel List Favourites M6 w9 NT1 PARIS PREMIERE AB1 ITV1 Press A or W to highlight a channel and press OK to watch CONTROLS AND FEATURES Skip channels This feature allows you to set channels that will be skipped when Pv or PA are used to tune Select the cha
24. Switzerland VHF 05 12 UHF 21 69 Italy VHF 05 12 D E F G H H1 H2 UHF 21 69 Spain UHF 21 69 Nederlands VHF 05 12 UHF 21 69 Greece VHF 05 12 UHF 21 69 DVB C Broadcast systems DVB S DVB S2 Broadcast systems Video Input PAL SECAM NTSC 3 58 4 43 External connections EXT 1 EXT 2 Input HDMI 1 2 3 4 Input PC Input Digital Audio Output S PDIF LAN port USB 1 USB 2 port Headphone socket Stereo Visible Screen Size approx Display Sound output at 10 distortion Input Output 21 pin SCART RGB A V input AV out TV out RCA jacks Y Pg Cp Pa Ce RCA jack Video Y is shared RCA jacks AudioL R shared HDMI compliant HDCP compliant Mini D sub 15 pin Analogue Optical RJ 45 Media Player nterface version USB 2 0 USB class Mass Storage File system FAT16 and FAT32 Maximum output 500mA specified to change the 3D glasses FPT AG0O2G Wireless LAN adaptor ready for a home network IEEE802 1 1a b g n compatible 3 5mm stereo A2 Nicam 2 carrier system 32 80cm 40 102cm 46 117cm 16 9 Main 10W 10W 92 Power consumption approx Standby power consumption approx Energy Efficiency Class On mode power consumption approx Average annual energy 32 consumption approx 32TL 32UL 32ML 40TL 40UL 40ML 46TL 46UL 46ML 0 3W 98W 122W 145W 32TL 32UL 32ML A A40TL 40UL 40ML A 46TL 46UL 46ML A 32TL 32UL 32ML 40TL 40UL 40ML 46TL 46UL 4
25. a new line Transponder Settings Frequency Polarisation Symbol Rate O Press OK B Edit each parameter as required and press OK 83 1231 H 22000 2 22 To delete a transponder In the Transponder Settings menu press A or W to highlight the line you want to delete Press the RED button To edit the Transponder Settings In the Transponder Settings menu press A or W to highlight the line you want to edit and press OK Press or to select Frequency Polarisation Symbol Rate or S S2 and set the item using the number buttons if necessary Press OK to save your settings Repeat steps 1 through 3 for other lines Press the BLUE button to finish editing and return to Satellite Settings Press the GREEN button to cancel any edits that were made Press the YELLOW button to reset all transponder settings to their initial default settings To select the Dish Type In the Satellite Settings menu press A or W to select the required satellite line and press OK Press or to highlight Dish and press the GREEN button Dish Settings Dish 1 Dish Type Press or to select Dish Type You can select Movable or Fixed as the Dish Type SETTING UP YOUR TV To select the LNB Settings In the Satellite Settings menu press A or W to select the required satellite line and press OK DB press dorP to highlight LNB and press the GREEN button LNB Settings LNB 1 Lower LOF Upper LOF Press
26. and buttons operate as volume up down as default To alter the programme position press once and press v or A To select an external input press and hold until the Inputs window appears and then press v or A to select the appropriate input source The Media Player feature provides access to photo movie and music files stored on a USB storage device that is connected via the USB 1 or USB 2 port or on a network device The USB port also has to be used with the TOSHIBA Dual Band WLAN Adaptor WLM 20U2 in order to access a wireless network You must use the TOSHIBA Wireless LAN device to ensure correct operation of this feature This feature is available only when the TOSHIBA Dual Band WLAN Adaptor is used Please always refer to the owner s manual of the equipment to be connected for full details NOTE e The USB socket has limited functionality and Toshiba can take no responsibility for damage to other connected equipment Interactive video games that involve shooting a gun at an on screen target may not work with this TV 15 CONNECTING YOUR TV MENU structure To open the main menu illustration below press MENU on the remote control Guide Genre Search Programme Timers Library x Setup TV Programmes Media Player Function Connected TV 1st Layer 2nd Layer 3rd Layer Press MENU Press 4P A Press lt gt Press OK Press AW 4D ZZ pigg gt Gu
27. guess or take chances with electrical equipment of any kind it is better to be safe than sorry INSTALLING YOUR TV Installation and important information Where to install Locate the television away from direct sunlight and strong lights Soft indirect lighting is recommended for Fixing strap comfortable viewing Use curtains or blinds to prevent y direct sunlight falling on the screen Place the TV on a stable level surface that can support gt the weight of the TV In order to prevent injury and maintain stability of this apparatus secure the TV to the level surface using the strap if fitted or to a wall Sturdy tie as short as possible using a sturdy tie to the P clips provided Otherwise secure the TV on the level surface using the supplied mounting screw Fixing strap The LCD display panels are manufactured using an extremely high level of precision technology however sometimes some parts of the screen may be missing P Clip picture elements or have luminous spots This is not a sign of a malfunction Make sure the television is located in a position where it cannot be pushed or hit by objects as pressure will break or damage the screen Also please be certain that small items cannot be inserted into slots or openings in the case Stand style is dependent on model Avoid using chemicals such as air refreshers cleaning agents etc on or near the TV pedestal Studies A indicate that plas
28. have been loaded These sub pages will remain available to view until another page is chosen or in normal TV mode the channel is changed 79 Navigating pages using Auto If Fastext is available four coloured titles will appear at the base of the screen To access one of the four given subjects press the relevant coloured button on the remote control For further information on your particular text system s see the broadcast text index page or consult your local Toshiba dealer Navigating pages using LIST The four coloured choices at the bottom of the screen are numbers 100 101 102 and 103 which have been programmed into the television s memory To view these pages press the relevant coloured buttons To change these saved pages press the relevant coloured button and enter the 3 digit number This number will change in the top left of the screen and in the coloured highlight Press OK to save Whenever OK is pressed all four page numbers showing at the bottom will be saved and the previous ones will be lost NOTE The video signal from the external inputs EXT 1 and EXT 2 is not saved If OK is not pressed the selection will be forgotten when the channel is changed Other pages may be viewed by entering the 3 digit page number but DO NOT press OK or these pages will be saved TEXT SERVICES Control buttons Below is a guide to the functions of the remote control text buttons T
29. in the geographical area within a radius of 20km from the centre of Ny Alesund in Norway To connect the TV to the PC with Intel Wireless Display PC with Intel Wireless Display _ TOSHIBA Dual Band WLAN adaptor CONNECTING YOUR TV Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television While all the necessary adjustments and controls for the television are made using the remote control the buttons on the television may be used for some functions USB 1 port Media Player Wireless LAN adaptor ready for a home network COMMON INTERFACE The Common Interface is for a Conditional Access Module CAM Contact a service provider The software updating of Cl Plus CAM may be automatically executed At this time your Recording Reminder programming will be canceled DVB COMMON INTERFACE SE Je F a E Control panel USB 2 port Media Player Wireless LAN adaptor ready for a home a oo network Switching on If the RED LED is not lit check that the mains plug is connected to the power supply and press on the remote control it may take a few moments The GREEN LED will be lit To put the television into Standby press on the remote control To view the television press again The picture may take a few seconds to appear For e
30. is NOT ALLOWED to be used in the geographical area within a radius of 20km from the centre of Ny Alesund in Norway CONTROLS AND FEATURES Setting up the Network You can select the Network Type Press MENU 4 to highlight Setup icon Press A 4 to highlight Preferences icon and press OK Preferences 3D Setup Recording Setup REGZA LINK Setup Network Setup Guide Type Network Device Setup Teletext Network Lock Press A or W to select Network Type and press or P to select Wired or Wireless Network Setup Network Type Wireless Setup Advanced Network Setup Network Connection Test NOTE If the Dual Band WLAN Adaptor is not connected Wireless cannot be selected If you selected Wired see Advanced Network Setup on page 45 Wireless Setup NOTE This feature is grayed out when the Dual Band WLAN Adaptor is not connected or Network Type is set to Wired When you insert or remove the wireless LAN adaptor you must turn off your TV and unplug the power cord and then plug and turn on again Continued connection of AP Access Point is not guaranteed The connection may be disconnected while watching TV Do not remove the Dual Band WLAN Adaptor when Network Type is set to Wireless or wireless communication is active There are 2 methods for Wireless Setup Assisted setup by using the Wi Fi Routers notification information Network name Authentication and Encryption are decided based on info
31. may not be available depending on the contents or DMS To resume normal playback press B gt play To play in fast reverse or fast forward directions press 44 or PP during playback Each time you press the or PP the playback speed will change To locate a specific file press k d or PPI repeatedly Press to display the file status information content number movie title progress time etc NOTE The information may not be correctly displayed depending on the contents or DMS During playback you can adjust the Picture and Sound menu functions from the Quick Menu The playback speed 41 P gt may not change depending on the stream To select subtitle and audio languages USB only Press SUBTITLE repeatedly to select your preferred subtitle language Press C I I repeatedly to select your preferred audio language NOTE This feture is not available depending on the contents To set the repeat mode Press QUICK to open the Quick Menu Press or to select Off All or 1 Mode Description Off The file is played back only once All Files in the same folder are repeatedly played back 1 The same file is repeatedly played back Press BACK NOTE When in the DMS and Multi View modes this feature cannot be used 62 Resume Play USB only You can resume playback from where it was last stopped Press Ill while playing the movie to memorize the stopped position On
32. may result in blurring of the image contours and background If you experience any abnormal sensation or feel fatigue or nausea when viewing 3D images stop watching and rest until the symptoms subside Before viewing again adjust the 3D effect to a lower number and view at a level at which the symptoms do not occur Setting the 3D PIN code A 3D PIN code is necessary for using 3D Safety Settings To enter a new PIN code o In the Preferences menu press A or W to select 3D Setup and press OK 2 Press A or W to select 3D PIN and press OK Press the number buttons to enter a 4 digit number Confirm the code NOTE PIN code cannot be set to 0000 To change or delete your PIN code oO In the Preferences menu press A or W to select 3D Setup and press OK Press A or W to select 3D PIN and press OK Press the number buttons to enter your 4 digit PIN code Select Change PIN or Delete PIN and press OK NOTE PIN code cannot be set to 0000 If PIN is deleted 3D Safety Settings is grayed out and the settings are reset to the factory default Setting 3D Start Message When this feature is set to On a message is displayed onscreen when a 3D signal is received In the Preferences menu press A or W to select 3D Setup and press OK Press A or W to select 3D Safety Settings and press OK Enter your 4 digit 3D PIN code Press A or W to select 3D Start Message 000 8 6 Press or to select
33. o In the Preferences menu press A or W to select Display Settings and press OK Press Aor W to select 4 3 Stretch and press dor to select On or Off Blue Screen When Blue Screen is selected the screen will turn blue and the sound will be muted on analogue channels and external input modes when no signal is received NOTE Some external input sounds may not be muted oOo In the Preferences menu press A or W to select Blue Screen Press lt or P to select On or Off Picture Position The picture position may be adjusted to suit personal preference and can be particularly useful for external inputs NOTE The Picture Position feature cannot be selected in the DTV mode oOo In the Preferences menu press A or W to select Display Settings and press OK 2 Press amp or W to select Picture Position Display Settings Auto Format 4 3 Stretch Picture Position PC Settings Press OK to view the options available for the picture format that has been selected Press A or W to select an option and press or to adjust the settings The options differ depending on the currently selected widescreen format and the input signal Picture Position Horizontal Position Vertical Position To return to the original factory settings select Reset in the Picture Position menu and press OK Picture still This feature is used to hold a still image on the screen 1 Press Y to hold an image on the screen a
34. press A or W again to restart the search When your media recorder signal is found press to move along to Station Use A V and P to put in the required characters e g VCR ATV Manual Tuning Station 11 Awe C28 0 V CR Press OK to save Repeat for each position you want to tune Press EXIT when you have finished PLEASE NOTE This television has direct channel entry if the channel numbers are known Select the ATV Manual Tuning screen in Step 3 Enter the Position number the System then C for standard terrestrial channels or S for cable channels and the Channel number Press OK to save 25 To prevent certain channels from being viewed positions can be Skip skipped Select ATV Manual Tuning from the System Setup menu Use A or W to highlight the position to be skipped and press OK to select ATV Manual Tuning Pos Channel Station 10 c7 40 C22 C25 C28 exit Press to select Skip Use A or W to turn Skip on Press OK 4 gt on the screen indicates a skipped position ATV Manual Tuning Skip On Press EXIT and repeat steps 1 through 4 to set other positions if necessary Each position has to be individually selected To turn Skip off repeat the procedure for each position Skipped positions cannot be selected by PA and Pv or by the controls on the television but can still be accessed by the number buttons on the remote control SETTING UP YOUR TV
35. select Network Type and press or P to select Wireless Press A or W to select Wireless Setup and press OK Press A or W to select Manual Setup and press OK Press A or W to select Network Name and press OK The Software Keyboard window will appear CONTROLS AND FEATURES O Input the Network Name by using the Software Wireless Information Keyboard see page 47 To save your setting press The settings configured in Wireless Setup can be confirmed the BLUE button o Press QUICK to open the Quick Menu Press A or W to select Authentication and press or 2 P to select Open System Shared Key WPA PSK or Press A or to select Wireless Information and WPA2 PSK press OK press A or V to select Encryption and press or gt guek Menu to select None WEP TKIP or AES peure size SHEE 3D Settings NOTE More Information Certain encryption types are only compatible with Channel Options specific authentication types Sleep Timer 00 00 When Authentication is Open System only WEP Speakers TV Speakers or None is compatible Headphone Level When Authentication is Shared Key only WEP is Wireless Information compatible When Authentication is WPA PSK or WPA2 PSK only TKIP or AES is compatible When incompatible Authentication Encryption 3 When the Network Type is Wireless a Wireless Information window will appear pairings are detected a warning MERAJE w
36. television To connect a PC to the RGB PC terminal When connecting a PC to the RGB PC terminal on the television use an analogue RGB 15 pin computer cable the back of your television Mini D sub 15 pin connector FO maap Computer RGB PC cable not gt gt supplied amm Conversion adaptor if required not supplied To use a PC set the monitor output resolution on the PC before connecting it to the television For acceptable PC signal formats see page 86 To display the optimum picture use the PC setting feature see page 74 NOTE Some PC models cannot be connected to this television An adaptor is not needed for computers with a compatible mini D sub15 pin terminal Depending on the DVD s title and the specifications of the PC on which you are playing the DVD Video some scenes may be skipped or you may not be able to pause during multi angle scenes A band may appear at the edges of the screen or parts of the picture may be obscured This is due to scaling of the picture by the set it is not a malfunction When PC input mode is selected some of the television s features will be unavailable e g Colour System in the System Setup menu Some PC models may output unique signals that the television may be unable to detect see page 86 If connecting a certain PC model with a unique PC signal t
37. the signal may be weak so the station order can be changed using ATV Manual Tuning REMEMBER Press TV at any time to select between ATV and DTV modes NOTE The time will be set automatically by transmission but can be advanced or decreased by using Local Time Setting in the DTV Settings screen SETTING UP YOUR TV m 21 Select Next and press OK The Satellite Settings screen will appear From this window you can add the satellites that you wish to tune and configure detailed settings for each one individually For further information visit www Toshiba om net Satellite Settings Switch Type LNB Power No Satellite ASTRA 19 2 E 1 2 3 4 Transponder 1 85 10729 MHz Dish Type Fixed Lower LOF 9750 Upper LOF 10600 Highlight Done and press OK If your satellite dish is movable the following Positioning screen will appear Positioning Satellite ASTRA 19 2 E Transponder Go to 0 Go to Stored Position 1 83 10743 MHz H Step Size Positioning Store Position Signal Level 30 Press Aor W to highlight Positioning and then press or to find the dish position with the strongest signal level Press A or W to highlight Store Position and press OK to store the dish position Repeat steps 20 and 21 for the next satellite as necessary If your satellite dish is not movable the Positioning screen will not appear Adjust the dish position manually for the maximum Signal Leve
38. the standby button is pressed the television will switch off and can only be brought out of standby by using the remote control The timers Programme Timers digital only This feature will set the television to go to a specific channel at a certain time It can be used to view a particular programme or by setting the mode to daily or weekly can be used to view a series of programmes Press MENU 4P to highlight TV Programmes icon Press A 4P to highlight Programme Timers icon and press OK then press OK The Edit Timer menu will now appear 3 Press if necessary to select an open timer position on screen Press A and W to go through the list adding the details of the programme by using the number buttons and and to make selections Edit Timer Timer Type 4 10 50 Tue 26 Apr Recording gt E 30 CABC Channel Date Tue 26 Apr 2011 Start Time 10 51 Channel Repeat Once Set Timer B When all of the details have been entered highlight Set Timer and press OK to save the timer The ORANGE programme timer indicator on the front of the television will be lit see page 83 for details CONTROLS AND FEATURES On Timer The feature allows you to set the television to turn on automatically to a preset channel at a certain time of day or after acertain length of time Press MENU 4 to highlight Function icon Press A 4P to highlight On Timer icon and press OK Press A or W
39. under no circumstances shall Toshiba be liable for any consequential loss and or damage including but not limited to the following loss of profit interruption of business the loss of recorded data whether caused during normal operation or misuse of the product When Using a USB HDD The recording function has been designed for private use and entertainment in your home environment Please note that any commercial use of the recording function could lead to copyright infringement of authors rights Toshiba asks you to respect the intellectual property rights of third parties Before recording toa device connected to the TV make a test recording and check the recording performance Programmes that are prohibited from copying due to copyright protection cannot be recorded Toshiba shall not be liable for compensation or incidental damages of any kind whatsoever resulting from content that was not properly recorded on the recording device or that was modified or lost Toshiba shall not be liable for damages of any kind whatsoever breakdown of the recording device modification or loss of the recorded content etc resulting from malfunction operating failure or incorrect operation due to combining with another connected device If you connect a USB HDD that has been used with a PC or another TV only programmes which are recorded using this TV can be playback Turn off the TV power supply before if you disconne
40. 45678 9 S10 1 Position C7 The number to be pressed on the remote control to tune 40 the channel C22 2 System C25 Specific to certain areas C28 c30 3 Colour System Factory set to Auto should only be changed if problems are experienced i e NTSC input from external source Different Channel numbers may be displayed 4 Skip Set Skip to On or Off gt for the selected channel 3 Press OK to select If the channel chosen for the media See page 25 recorder is set to skip Skip should be removed before 5 Signal Class storing The channel classification O Press P to select System and press A or W to change 6 Channel if required The channel number on which a station is being broadcast ATV Manual Tuning 7 Search System ay ER A Fee 1G 2 9 io Search up and down for a signal 8 Manual Fine Tuning Only used if interference weak signal is experienced See page 81 Then press P to select Search Press A or W to begin the search The search symbol will flash 9 Station Station identification Use the A W and lt P buttons to enter up to seven characters P ATV Manual Tuning To allocate a position on the television for a decoder and Search media recorder turn the decoder on insert a pre recorded a a WAN S Ta A A n film in the media recorder press PLAY and manually tune 24 SETTING UP YOUR TV 65660 Each signal will show on the television If it is not your media recorder
41. 6ML L 32UL 32ML J 40TL 40UL 40ML 46TL 46UL 46ML 44 7W 51 6W 66 3W 65 3kWh y 75 3kWh y 96 8kWh y Tested in accordance with IEC 62087 BD Ed 2 0 2008 in default settings Operating 4 hours a day and 365 days a year Dimensions approx Weight approx Operating condition Supplied accessories Optional accessories 32TL 32UL 32ML 51cm H 74cm W 22cm D 40TL 40UL 40ML 61cm H 92cm W 22cm D 46TL 46UL 46ML 69cm H 106cm W 24cm D Height dimension includes foot stand 32TL 32UL 32ML 10 0kg 40TL 40UL 40ML 14 5kg 46TL 46UL 46ML 18 5kg Temperature 5 C 35 C 41 F 94 F Humidity 20 80 non condensing Remote control CT 90405 2 batteries AA IEC R6 1 5V Toshiba 3D glasses FPT AG02G for UL975 TL963RB ML963RB series P Clip Screw for TV mounting See page 5 4 spacers for wall mounting Toshiba 3D glasses FPT AGO2G for TL963 TL966 series TOSHIBA Dual Band WLAN Adaptor WLM 20U2 Specification is subject to change without notice TOSHIBA Television Central Europe Sp z 0 0 All rights reserved Reproduction in whole or part without written permission is strictly prohibited TOSHIBA Television Central Europe Sp z 0 0 ul Pokoju 1 Biskupice Podg rne 55 040 Kobierzyce Poland
42. A or W to select Lower LOF or Upper LOF and input the appropriate frequencies Auto Tuning NOTE As new services are broadcast it will be necessary to re tune the television in order to view them Auto Tuning will completely re tune the television and can be used to update the channel list It is recommended that Auto Tuning is run periodically to ensure that all new services are added All current channels and settings i e locked channels will be lost Oo 2 Press MENU 4 to highlight Setup icon Press A 4P to highlight System Setup icon and press OK Press A or W to select Auto Tuning and press OK System Setup Menu Language English Country Ant Cable Satellite Germany Satellite Settings Auto Tuning ATV Manual Tuning DTV Manual Tuning DTV Settings 23 For DTV ATV Tuning Press or to select Yes and press OK Auto Tuning Antenna Tuning Mode 4 DTV and ATV gt Start Scan Press lt orP to select DTV and ATV DTV or ATV if available then highlight Start Scan and press OK to continue with the Auto Tuning NOTE If you have selected Others for the Country field in the Setup menu and selected a tuning mode other than DTV choose the optimum ATV broadcasting system B G D K or L The television will start to search for all available DTV and or ATV services You must allow the television to complete the search When the search is complete the Auto Tuning
43. Address Subnet Mask Default Gateway NOTE Other items will be grayed out when Auto Setup is set to On Manual Setup In the Preferences menu press A or W to select Network Setup and press OK Press Aor W to select Advanced Network Setup and press OK 3 Press A or W to select IP Address Setup and press OK Highlight Auto Setup and press or to select Off IP Address Setup Auto Setup IP Address Subnet Mask Default Gateway Press A or W to select IP Address Press or to highlight the field you want to change and then use the number buttons to input the IP address To save the setting press OK NOTE IP address field numbers must be between 0 and 255 After each field number has been set press OK to store the entire address If the entire IP Address is invalid a warning message will appear after OK is pressed Press A or W to select Subnet Mask and edit in the same way as IP Address IP Address Setup Auto Setup IP Address Subnet Mask Default Gateway 8 Press amp or W to select Default Gateway and edit in the same way as IP Address NOTE If you manually set the IP address you must not use the same IP address for any other device The IP address you use should be a private address CONTROLS AND FEATURES DNS Setup NOTE When the DHCP function of the router connected to this TV is Off set Auto Setup to Off and manually set the DNS address es Your internet service prov
44. CTING YOUR TV Connecting external equipment Before connecting any external equipment turn off all main power switches If there is no switch remove the mains plug from the wall socket ILLUSTRATION SHOWS 40TL963 Power cord ae INPUT e jack LAN port SCART EXT 1 RGB PC INPUT DIGITAL AUDIO OUTPUT OPTICAL HDMI 1 2 3 INPUTS COMPONENT VIDEO AUDIO INPUT VIDEO AUDIO INPUT Y L R EXT 2 Aerial Cable Media Recorder i Connect the aerial to the socket on the rear of the television If you use a decoder and or a media recorder it is essential that the aerial cable is connected through the decoder and or through the media recorder to the television E type Satellite cable cece cece ee Ce Connect the LNB from the satellite dish to the SATELLITE ANTENNA socket on the TV You can receive TV radio interactive TV and HD TV with clear reception Connect the media recorder IN OUT socket to the television Connect the decoder TV socket to the television Before running Auto Tuning put your decoder and media recorder to Standby The RCA sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals When connecting the VIDEO AUDIO devices connect those cables to Y L R sockets The Digital Audio Output socket enab
45. Down No Signal Power Down Digital on screen information Information Auto Standby Amplifier Control Initial Speaker Setting REGZA LINK input source selection REGZA LINK one touch play REGZA LINK system standby Using EPG Electronic Programme Guide E TEXT SERVICES Using Broadcast Guide 68 MONCSERVICES a AACN AAN Genre selection searching a Selecting modes Using MediaGuide 69 Text information Navigating pages using Auto Navigating pages using LIST MediaGuide screen Primary Navigation menu Digital settings parental control 70 Control DUTLOMS resne nnana Parental PIN Setup PROBLEM SOLVING Parental Setup 71 dk 81 Network Lock Questions and Answers ccsssssssssssssssssssssssssssssssssessssssssesssseens Digital settings Channel Options INFORMATION Selecting favourite channels License Information 84 Favourite Channel List Information Skip channels Specifications and accessories Locking channels 4 Digital settings other settings ssssesscsccccssseeecsssscsnnseeeseeeee 72 During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance USB HDD Recording is supported on this TV if this functionality is not implemented at time of purchase it will be made available via firmware update in mid 2012 Please note the USB HDD recording feature will not be available in all countries
46. HDMI terminals The HDMI inputs on this TV only accept VGA SVGA XGA WXGA and SXGA signal formats which are compliant with VESA as shown in the table below Since some PCs and HDMI or DVI devices input signals which are different from the resolution and frequency described in the table below the following phenomenon may occur incorrect display false format detection picture position failure blur or judder In this case set the monitor output format on your PC HDMI or DVI device to conform to a signal in the table below Format Resolution V Frequency H Frequency Pixel Clock Frequency VESA Standard 480i 720 x 480i 59 940 60 000Hz 15 734 15 750kHz 27 000 27 027MHz 576i 720 x 576i 50 000Hz 15 625kHz 27 000MHz 480p 720 x 480p 59 940 60 000Hz 31 469 31 500kHz 27 000 27 027MHz 576p 720 x 576p 50 000Hz 31 250kHz 27 000MHz 1080i 1920 x 1080i 59 940 60 000Hz 33 716 33 750kHz 74 176 74 250MHz 1080i 1920 x 1080i 50 000Hz 28 125kHz 74 250MHz 720p 1280 x 720p 59 940 60 000Hz 44 955 45 000kHz 74 176 74 250MHz 720p 1280 x 720p 50 000Hz 37 500kHz 74 250MHz 1080p 1920 x 1080p 59 940 60 000Hz 67 433 67 500kHz 148 352 148 500MHz 1080p 1920 x 1080p 50 000Hz 56 250kHz 148 500MHz 1080p 1920 x 1080p 24 000Hz 27 000kHz 74 250MHz VGA 640 x 480 59 940 60 000Hz 31 469 31 500kHz 25 175 25 200MHz e 72 809Hz 37 861kHz 31 500MHz e 75 000Hz 37 500kHz 31 500MHz e
47. INK equipment In the REGZA LINK Setup menu press W to highlight Auto Standby Press or P to select On or Off 77 Amplifier Control When Amplifier Control is set to on off the connected REGZA LINK amplifier In the REGZA LINK Setup menu press to highlight Amplifier Control Press or to select On or Off Initial Speaker Setting The Initial Speaker Setting allows to select TV speakers or Amplifier speakers In the REGZA LINK Setup menu press to highlight Initial Speaker Setting Press or to select TV Speakers or Amplifier REGZA LINK input source selection Ifa REGZA LINK device with HDMI switching capability e g AV amplifier is connected to the HDMI input you can select another REGZA LINK device that is connected to the master HDMI device on the input source list o Press and a list will appear on screen showing available input sources Press W to select the desired input source with REGZA LINK icon Press and a second selection screen will appear showing all connected REGZA LINK equipment Inputs LAY 41 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 PC DVD VCR IDVR CBL SAT GAME TV AUX Press amp or W to select the desired input source and then press OK CONTROLS AND FEATURES NOTE These functions depend on the device connected If you select the REGZA LINK input source from the popup window some REGZA LINK devices may automatically turn on When the televi
48. IONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA L L C SEE HTTP WWW MPEGLA COM MPEG Layer 3 audio coding technology licensed from Fraunhofer IIS and Thomson Hybrid TV Standard is implemented according to ETSI TS 102 796 v1 1 1 Intel and the Intel logo are trademarks of Intel Corporation in the U S and or other countries INFORMATION Cleaning the screen and cabinet Turn off the power and clean the screen and cabinet with a soft dry cloth We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage Disposal The following information is only for EU member states Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste Integrated batteries and accumulators can be disposed of with the product They will be separated at the recycling centres The black bar indicates that the product was placed on the market after August 13 2005 By participating in separate collection of products and batteries you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health For more detailed information about the collection and recycling programmes available in your country please contact you
49. On or Off 33 CONTROLS AND FEATURES Setting 3D Lock When this feature is set to On you must enter 3D PIN code for changing display mode In the Preferences menu press A or W to select 3D Setup and press OK Press A or W to select 3D Safety Settings and press OK Enter your 4 digit 3D PIN code Press A or W to select 3D Lock Press or to select On Setting 3D Timer Lock When the 3D Timer Lock feature is set to On neither the PIN input window nor the 3D start message will be shown while the 3D Enable timer is active even if a switch to 3D Mode occurs This helps to avoid asking for the 3D Lock PIN and displaying 3D start message every time when switching to 3D NOTE This feature cannot be selected until the 3D PIN is set In the Preferences menu press A or W to select 3D Setup and press OK Press A or W to select 3D Safety Settings and press OK Enter your 4 digit 3D PIN code Press A or W to select 3D Timer Lock Press or to select On Setting Enable 3D Timer This feature helps to remind you not to watch 3D video for extended periods of time Once a set period of time has passed a dialogue will be shown asking you if you wish to continue viewing or not In the Preferences menu press A or W to select 3D Setup and press OK Press A or W to select 3D Safety Settings and press OK Enter your 4 digit 3D PIN code Press amp or W to select Enable 3D Timer Press or to select 30 60 90
50. Player software under license from Adobe Systems Incorporated Copyright 1995 2009 Adobe Systems Incorporated All rights reserved Adobe and Flash are trademarks of Adobe Systems Incorporated DIVx DivX DivX Certified DivX Plus HD and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license Covered by one or more of the following U S patents 7 295 673 7 460 668 7 515 710 7 519 274 This product contains technology subject to certain intellectual property rights of Microsoft Use or distribution of this technology outside of this product is prohibited without the appropriate license s from Microsoft This product includes technology owned by Microsoft Corporation and can not be used or distributed without a license from Microsoft Licensing GP Content owners use Windows Media digital rights management technology WMDRWM to protect their intellectual property including copyrights This device uses WMDRM software to access WMDRM protected content If the WMDRM software fails to protect the content content owners may ask Microsoft to revoke the software s ability to use WMDRM to play or copy protected content Revocation does not affect unprotected content When you download licenses for protected content you agree that Microsoft may include a revocation list with the licenses Content owners may require you to upgrade WMDRM to access their content If you decline an upgrade yo
51. TOSHIBA Leading Innovation gt gt gt TL96 Digital Series UL97 Digital Series ML96 Digital Series Contents English INSTALLING YOUR TV Safety Precautions Installation and important information The remote control Inserting batteries and effective range CRORES CONNECTING YOUR TV Connecting external equipment s ssssssssssssssssssssssssrssssssresssessesse 10 Connecting an HDMI device To connect an HDMI device HDMI s ARC Audio Return Channel feature REGZA LINK connection Connecting a computer To connect a PC to the RGB PC terminal To connect a PC to the HDMI terminal Connecting a home network fe To connect the TV to a home network Wired 14 To connect the TV to a home network with an internet connection Wireless ssssssssssssssssssssesssese 14 To connect the TV to the PC with Intel Wireless Display Controls and input connections Switching on Using the menu system Using the TV controls and connections MENU structure SETTING UP YOUR TV StartUp Application nerona nnana acai a ANEN 17 Quick Setup Ant Cable Satellite if available Satellite Settings Auto Tuning ATV Manual Tuning Tuning Sorting positions DTV Manual Tuning Manual Tuning Manual Tuning for DVB C Manual Tuning for DVB S DTV Settings Channels Antenna Cable Channels Satellite Standby Channel Update Location setting Analogue switch off
52. TROLS AND FEATURES Using Intel Wireless Display Intel Wireless Display Intel WiDi is supported on this TV You can use your TV as second display for PC with Intel Wireless Display NOTE In order to use this feature the TOSHIBA Dual Band WLAN Adaptor WLM 20U2 not supplied is required see page 14 Press MENU 4 P to highlight Function icon Press A 4 P to highlight Intel Wireless Display icon and press OK A prompt will appear on the screen Select Yes Launch the Intel WiDi software on your PC and select scan for available adaptors Intel WiDi device name and ID list will then be displayed on the PC screen Select the TV which you wish to connect to Connecting will be shown on the TV Connecting your PC to your TV the first time When selecting the Toshiba TV for the first time a 4 digit code will appear on your TV screen This code needs to be inputted into your computer to authenticate the connection If authentication has already taken place Connected to Intel Wireless Display Please Wait will appear on screen B After the Intel WiDi connection is complete the TV screen will mirror the content shown on the PC screen NOTE When connecting Intel WiDi PC must have power turned on When the Intel WiDi software is active other TV network connections are not available When the Intel WiDi software is active other applications may not be usable Int
53. U lt 4 gt to highlight Media Player icon DB bress A lt P to highlight Network Media Player and press OK 3 Select the server you want to use and press OK Multi View will appear Multi View DMS o 3 Network Media Player WB Folder name 5 9999 Retum 3wo000000 mp3 300000000 mpg Photo Movie and Music files and folders are displayed in the Multi View DMS Files are displayed according to the type first selected Photo Movie or Music e g If you first selected a Photo file only Photo files will be displayed To select a file in the Multi View D Press AV 4b to select a file or folder Press OK to move to the next layer or press BACK to return to the previous layer NOTE You can also return to the previous layer by selecting the icon at the top left of the Multi View screen and pressing OK To close the Media Player so bress Exit Viewing photo files on a DLNA CERTIFIED Server or USB device There are three types of viewing modes Multi View USB Photo This view allows you to search for photos in a grid format The pictures are displayed using thumbnail data in each image file Broken photo contents 5 9999 3wo000000 jpg wooooootjpg ano jpg veg000000 jpg The initial highlighted position will be on the top left thumbnail in the Multi View Press AV lt P to move the highlight in one window If all of the photos will not fit in one screen when p
54. ame Setup USB HDD Record Function a Setting up the USB HDD for recording ssssssseceseeeeee To record DTV programmes One Touch Recording How to set recordings via the Programme Guide 50 To check edit or delete scheduling information 51 Subtitles To view a recorded programme sssssseesssceecesssneeeeeeeeeeee Audio languages Operations from the Library screen Common Interface Recording Setup Software Upgrade and Licences Scheduling priority Searching for New Software Using Toshiba Places Network Upgrade Using Hybrid TV Standard if available Software Licences Using Intel Wireless Display System Information and Reset TV Intel Wireless Display Device Name System Information PC List Reset TV Using the Media Player PC Settings Basic operation Horizontal and Vertical Position Viewing photo files Clock Phase on a DLNA CERTIFIED Server or USB device 59 Sampling Clock Viewing movie files Reset on a DLNA CERTIFIED Server or USB device 61 Input selection and AV connections Playing music files Input selection on a DLNA CERTIFIED Server or USB device 64 Labeling video input sources Other features Digital Audio Output Panel Lock Using REGZA LINK The timers Enable REGZA LINK Programme Timers digital only TV Auto Power On Timer Sleep Timer Energy Saving Settings Automatic Power
55. ammes Genre Search icons and press OK to access the Genre Search screen Genre Search El Movies 10 50 Tue 6 Apr BIO TEE Wed 27 Apr 0 15 1 45 Wed 27 Apr 22 15 23 55 Thu 28 Apr 1 20 3 00 Fri 29 Apr 1 30 3 00 Sat 30 Apr 0 45 2 40 Sat 30 Apr 1 15 3 00 Sat 30 Apr 15 00 17 30 Sat 30 Apr 23 20 1 15 Sun 1 May 0 40 2 00 Sun 1 May 0 40 2 20 Indiana Jones and the Temple of Doom Sun 1 May 21 10 23 20 The jackal Sun 1 May 23 20 1 15 Coup De Ville Mon 1 May 1 10 3 00 In MEE Hard Rain 31 PARIS PREMIER 3 Red Corner The Lawnmower Man 141 NT1 31 PARIS PREMIER 131 PARIS PREMIER 11 NT4 11 NT4 2 Body and Soul The Nun s Story z ARE JAHH z 2 The Real Blonde pprmm00g0m000g Press or P to select the genre Programmes listed will change for the new genre Press A or W to select the programme for which you want to schedule recording Press OK The Edit Timer menu will appear Edit Timer The Daily Politics EE 2 CABC Channel 11 30 12 30 Tue 26 Apr 10 50 Tue 26 Apr Timer Type Recording Set Timer Press A or W to highlight Timer Type and press or P to select Recording Press A or W to highlight Set Timer and press OK The ORANGE LED will be lit CONTROLS AND FEATURES To programme the timer Press MENU 4 gt A 4 P to highlight TV Programmes Programme Timers icons and press OK Select the unprogrammed
56. ated to allow the use of both digital and analogue services However during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services This switch off will happen in a number of phases which will be advertised in your area well in advance It is recommended that at each phase the television is re tuned to ensure that existing and new digital services can be viewed without disruption 28 CONTROLS AND FEATURES General controls Quick Menu Quick Menu helps you access some options quickly such as Picture Mode Picture Size More Information Sleep Timer etc Press QUICK to display the Quick Menu and use A or W to select the option Quick Menu Picture Mode Picture Size 3D Settings More Information Channel Options Sleep Timer Speakers Headphone Level AutoView Super Live 00 00 TV Speakers NOTE Quick Menu items are different depending on the current mode Quick menu item example Mode Quick menuitem Description When viewing a TV Picture Mode See page 39 Programme or Picture Size See page 37 pictures from the external input 3D Settings See page 32 More Information See page 68 Single Window or 3D Single Window Channel Options See page 71 Sleep Timer See page 66 Speakers See page 77 Headphone Level See page 36 Wireless Inform
57. ation See page 44 When using EPG Genre Colour See page 69 USB Media Player Picture See page 39 Photo Single View 3D Settings See page 32 Slide Show Sound See page 35 Interval Time See page 60 Repeat See page 60 Background Music See page 60 Play List See page 61 Sleep Timer See page 66 Speakers See page 77 Headphone Level See page 36 29 Selecting channels To select a channel use the numbered buttons on the remote control Channels can also be selected using PA and Pv To display on screen information such as channel input mode or stereo mono signal press Press again to cancel The Time Display analogue only The time display facility allows the current text service time to be seen on the television screen Press EX whilst watching a normal television broadcast to see the time display from the broadcaster It will remain on screen for about 5 seconds NOTE This display may not be available in some cases Stereo and Bilingual transmissions For DTV programmes For stereo or dual mono broadcasts press CDI and use or P to select settings Mode Display Pressing gt CD Stereo Stereo Left Right O Dual mono Dual 1 Dual 2 Dual Mono CO Multichannel For multi audio track broadcasts press C T repeatedly to change the audio language see Audio languages on page 72 For ATV programmes f stereo or
58. ayback will skip to the beginning of the next content Press K d to skip to the beginning of the current chapter When kdd is pressed twice in succession it will skip to the beginning of the previous chapter If k is pressed twice in succession at the first chapter stop playing the current content and skip to the beginning of the previous content The Number button is used for direct jump If the 3 button is pressed playback will jump to the beginning of 3rd chapter Even if the playback content has authored chapters the Number button is used to jump directly to Auto Generated Chapter If the content has Authored Chapters Kd PPI are using for Authored Chapters NOTE Depending on the content data will not be operated The playback speed 4 PP may not change depending on the stream Using Multi Title and Alternative Timelines Multi Title DivX Plus HD files may contain up to 100 titles You can change the title It contains same video file by pressing the RED button When the RED button is pressed it will display the title change window at the bottom on the screen same as Subtitle or Audio change window The title is changed cyclically each time the RED button is pressed Playback will start from start time of selected title every Aor V NOTE Depending on the content data will not be operated CONTROLS AND FEATURES Playing music files ona DLNA CERTIFIED Server or USB device You can list
59. be liable for any damages in connection with the accuracy or availability of the program schedule information or other data in the Rovi Guide system Third party internet services are not provided by Toshiba may change or be discontinued at any time and may be subject to internet service provider restrictions Toshiba makes no warranties representations or assurances about the content availability or functionality of third party content or services Use of third party internet services may require the creation of a separate account through a computer with internet access and or payment of one time and or recurring charges and membership Not all third party services may be available on or compatible with this product In order to experience the full suggested capabilities of this product fully compatible devices may be required 70 Digital settings parental control In order to prevent viewing of unsuitable films and programmes channels and menus can be locked in digital mode These can then only be accessed with a security code PIN Parental PIN Setup Press MENU lt P to highlight Setup icon B bress A 4P to highlight System Setup icon and press OK Press A or W to select DTV Settings and press OK System Setup Menu Language English Country Ant Cable Satellite Germany Satellite Settings Auto Tuning DTV Manual Tuning DTV Settings Press A or W to highlight Parental PIN Setup and press OK DTV S
60. chedule To edit a schedule Press A or W on the Programme Timers screen to select the title whose schedule you want to edit and press OK The Edit Timer screen will appear Change the settings as required following the same procedure as for setting the schedule Press A or W to highlight Set Timer and press OK To delete a schedule Press A or W on the Library screen to select the title whose schedule you want to delete Press the RED button Press or P in the displayed confirmation window to select Yes and press OK The selected schedule will be deleted NOTE You can also delete a schedule by selecting Delete Timer from the Edit Timer menu for each programming method To view arecorded programme To view the recorded Library screen and select a title from the recorded programme list Press MENU 4 gt A 4 P to highlight TV Programmes Library icons and press OK Library screen will appear O 14 15 Wed 16 Feb aw in EE 1235 ITV London Library All Sort New Wed 16 Feb 10 00 a fj Wed 16 Feb 10 00 Thu 17 Feb 10 00 Thu 17 Feb 10 00 Fri 18 Feb 10 00 Fri 18 Feb 10 00 Fri 18 Feb 10 00 Sat 18 Feb 10 00 i 10 July 2011 14 30 01 30 USB HDD3 Remaining Capacity Mon 18 Feb 10 00 y 86 912 0GB Sun 18 Feb 10 00 Press A or W to select the title you want to view A preview of the content selected can be seen on the preview screen To change the order in which the t
61. ck Phase Press dor to adjust until the picture clears 74 CONTROLS AND FEATURES Sampling Clock Adjusting the Sampling Clock alters the number of pulses per scan this will clear vertical lines on the screen oO In the Display Settings menu press A or W to select PC Settings and press OK 2 Press A or W to select Sampling Clock Press dorb to adjust until the picture clears Reset Use Reset to return all items to the original factory settings oO In the Display Settings menu press A or W to select PC Settings and press OK 2 Press A or W to select Reset and press OK NOTE When a PC is connected using HDMI none of these functions will be available The screen is disrupted momentarily when adjusting PC Settings This is not a sign of malfunction The default settings and adjustment ranges may vary depending on the input signal format Input selection and AV connections See page 10 for a detailed image showing recommended connections Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket Alternatively press the external source selection button until the picture from connected equipment is shown Input selection Use the Input Selection window if the television does not switch over automatically W By pressing on the remote control or TV a list will appear on screen showing all inputs and external equipm
62. column blank column and press OK The Edit Timer menu will appear Edit Timer Timer Type 4 10 50 Tue 26 Apr Recording gt Mmm 30 CABC Channel Tue 26 Apr 2011 10 51 Channel Date Start Time End Time Repeat Set Timer Press A or W to highlight Timer Type and press or P to select Recording Press A and W to go through the list adding the details of the programme by using the number buttons and and P to make selections Channel Select the channel you wish to record Date Select the date that you wish recording to start Start Time Select the time to start recording End Time Select the time to end recording Repeat Select Once Daily or Weekly Once The selected content is recorded once The same time slot on the same channel is recorded every day on and after the selected day Daily Weekly The same time slot on the same channel on the same day of the week is recorded on and after the selected day Press A or W to highlight Set Timer and press OK The ORANGE LED will be lit 51 To schedule a programme using the information screen Press the information screen will appear giving details of the channel and programme currently being viewed E 8888 rvi London CO J AD English 30 20 ELODEO ASTRA 19 2 E gt wt 6 00 Thu 11 Oct EXC MLB Young s two run triple leads AL over NL 6 00 8 00 HD 16 9 S ql AD 18 A
63. ct USB HDD Not doing so may result in loss of the recorded data or malfunction of the USB HDD Please note that recording on the USB HDD is no longer playable after the TV s main board is exchanged during service INSTALLING YOUR TV The remote control Simple at a glance reference of your remote control 3 6 7 2 5 8 z 10 2 12 13 um a Quick 15 ayy 19 18 21 23 25 26 mui 27 29 TOSHIBA CT 90405 For On Standby mode To select external input sources To select TV Mode DTV Ant DTV Cable DTV Sat ATV To switch between 2D and 3D modes Widescreen viewing ODI I Stereo bilingual transmissions Digital Subtitles or Analogue TEXT Subtitle pages if available Number buttons Switch the Audio Description On Off To return to previous channel ww ON AUN AWN n O To alter the TV volume N To display on screen information To access the index page in Text mode 13 To mute the TV sound 14 To access Quick Menu 15 To change programme positions To change TEXT pages 16 To access the TOSHIBA PLACES Top Page When network is not connected an error message will be displayed 17 Toaccess Media Player Menu 18 To call up text services 19 To access the analogue or digital Channel List 20 On screen Menus 21 To display the digital on screen Programme Guide 22 AY K X To page up down left or right 23 Whenusing menus the arrows move the cursor on the sc
64. dual language broadcasts are transmitted the word Stereo or Dual will appear on the screen each time channels are changed disappearing after a few seconds If the broadcast is not in stereo the word Mono will appear Stereo Press Q J to select Stereo or Mono Bilingual Bilingual transmissions are rare If they are transmitted the word Dual will be displayed Choose the required programme number and if the word Dual appears press C to select Dual 1 Dual 2 or Mono CONTROLS AND FEATURES Using 3D functions Before using 3D programming see and follow When using the 3D glasses section on page 6 Viewing 3D programming requires the following 3D glasses Toshiba FPT AGO2G UL975 TL963RB ML963RB series Supplied TL963 TL966 series Not supplied Compatible 3D playback device or 3D source 3D capable high quality HDMI cable Using the 3D glasses Names and functions Lens liquid crystal shutter A right and left liquid crystal shutter opens and closes alternately with the images for the left eye and for the right eye alternately projected on the television screen In this way 3D images are reproduced Power switch and power light Turns on or off the power of 3D glasses with the switch When working the power light blinks once every 2 seconds When the power is turned off the power light goes out Power switch ON OFF Power light Protective films Peel t
65. e differences oO Set the volume level usually used when watching a DTV 5 1ch programme Tune to a channel which is DTV 2ch ATV or an external input 3 In the Sound menu press A or W to select Audio Level Offset and press OK Press A or W to select an option and then press or P to adjust the volume level Audio Level Offset DTV 2ch ATV External Input NOTE The available item changes depending on the current input source For example while watching a DTV 2ch programme only DTV 2ch is available and the other two items are grayed out in the menu This allows you to easily adjust according to each condition When watching a DTV 5 1ch programme this feature is not available TV Speakers On Off This feature allows you to turn the TV speakers off when connecting the audio system o In the Sound menu press A or W to select TV Speakers pess Aor P to select Off To turn on the built in speakers Choose On in step 2 36 Headphone Settings This setting is used to set the sound output when headphones are connected Speaker Link Headphone Speakers On Sound is output No sound lt 1 is available Off Sound is output Sound is output Headphone level lt 1 is available menu is available In the Sound menu press A or W to select Headphone Settings and press OK Press A or W to select Speaker Link and press or to select On or Off If you select Off then highlight H
66. e the Photo Viewer oO Press EXIT The television will return to the last viewed channel or external input File Compatibility See page 88 CERTIFIED Server or USB device You can select movies from a Multi View of available files Viewing movie files on a DLNA Multi View USB Movie MOVIE WB WFoider name 5 9999 Return i x0oo00 mpg xoo000x mpg 79000000 mpg x0o000 mpg ka w0o000 mpg xo0000x mpg swo000000mpg 0x00 Press A V lt P to select a file or folder PA or K A Py or X Y buttons can be used to page up down the Multi View when there are more files than will fit onto one screen NOTE The page down function on the last page and page up function on the first page are not available When you select a folder press OK to move to the next layer Press BACK to move back to the previous layer With the desired file selected press OK or B play to start playback NOTE On preview screen if you highlight the file without pressing OK the content is played ona preview screen When OK is pressed it is played in full screen mode Depending on the file size it may take some time to start playback Press ll to stop playback NOTE If playback finishes before ll is pressed the screen will return to the Multi View Depending on the file size it may take some time for playback to begin CONTROLS AND FEATURES During playback Press IMI to pause PAUSE
67. eadphone Level and use or P to adjust the headphone sound Headphone Settings Speaker Link Headphone Level Audio Description Audio Description is an additional narrative sound track for visually impaired individuals to understand and enjoy the story line more fully The letters AD will be displayed in the channel banner when programmes contain AD content In the Sound menu press A or W to select Audio Description and press OK Press A or W to select Audio Description and press lt orP to select On Audio Description Audio Description Mixing Level The AD button on the Remote can also be used to toggle the Audio Description feature between On and Off To adjust the level of the audio description sound to the main sound highlight Mixing Level and press orb CONTROLS AND FEATURES Widescreen viewing Depending on the type of broadcast being transmitted programmes can be viewed in a number of formats Use this setting when watching a widescreen DVD widescreen video tape or a 16 9 broadcast when available Due to the range of WIDE widescreen formats 16 9 14 9 20 9 etc black bars may be visible on the top and bottom of the screen 3 Use this setting to view a true 4 3 g broadcast SUPER LIVE This setting will enlarge a 4 3 image to fit the screen by stretching the image horizontally and vertically holding better proportions at the centre of the image Some distort
68. ect and press the GREEN button f icon appears next to the title and the programme is protected If Protect is set to On when the programme is recorded icon appears next to the title of the recorded programme When a title with icon is selected and the GREEN button is pressed icon disappears and the programme is unprotected To delete a recorded programme Press the RED button Check boxes will appear next to the titles 2 Press A or W to select the title you want to delete and press OK A check mark will be inserted in the check box To insert a check mark against all the titles press the YELLOW button To uncheck all the check boxes press the BLUE button NOTE A check mark will not be inserted against protected titles Note that once deleted a title cannot be restored Press the RED button Select Yes in the confirmation window and press OK All the titles with check marks will be deleted 53 USB HDD capacity You can check the remaining capacity of the USB HDD using Remaining Capacity Fri 18 Feb 10 00 Fri 18 Feb 10 00 Fri 18 Feb 10 00 Sat 18 Feb 10 00 Sun 18 Feb 10 00 Sun 18 Feb 10 00 USB HDD3 Sun 18 Feb 10 00 Remaining Capacity Mon 18 Feb 10 00 y 86 912 0GB LY lm 1235 ITV London 10 July 2011 14 30 01 30 NOTE The remaining capacity displayed is only a guide it is not guaranteed Recording Setup You can set your preferences for recording
69. ectly use a crossover LAN cable Please consult your PC manufacturer about details of PC settings Wireless appliances may interfere with Intel Wireless Display To connect the TV to a home network Wired the back of your television LAN ry gt Modem if available Router with Hub Gao A Aa Bong i OF i 0 2 C 3 Server PC Cable or Phone jack 1 Coaxial or telephone cable depending on your modem type 2 Standard LAN cable 3 Do NOT connect a phone jack directly to the TV s LAN port 14 To connect the TV to a home network with an internet connection Wireless Please refer to Wireless Setup section on page 43 the back of your television f f z TOSHIBA Dual Band WLAN adaptor Access point AP Wireless LAN router Q ooga tf i Modem 4m Computer How to use this Dual Band Wireless LAN Adaptor Ifthis device is going to be operated in the frequency range of 5 15 GHz to 5 35 GHz it is restricted to indoor use If this device is going to be operated for 802 11 b g n function in the frequency range of 2 454 GHz to 2 4835 GHz in France it is restricted to indoor use A general authorization is required for using this device outdoors or in public places in Italy e This device is NOT ALLOWED to be used
70. el WiDi device name of the TV can be changed from the Intel WiDi software 57 To exit Intel Wireless Display Exit Intel Wireless Display by pushing the disconnect button on Intel WiDi software or by pressing EXIT on the TV remote control NOTE If the PC has been inactive for some time the Intel WiDi connection will be disconnected automatically Intel Wireless Display Device Name The TV s Intel Wireless Display device name can be changed In the Preferences menu press A or W to select Setup and press OK Press A or W to highlight Intel Wireless Display Setup and press OK Highlight the Intel Wireless Display Name and press OK The Software Keyboard window will appear Input the Intel Wireless Display device name by using the software keyboard see page 47 Press the BLUE button Highlight Done and press OK to save your setting PC List PC List displays a list of MAC addresses for previously connected PC that have been connected before The maximum number that can be stored is 20 If the list run out of space the least recently used MAC address will be deleted and the new MAC address added automatically In the Intel Wireless Display Setup screen highlight the PC List and press OK PC List will appear The registered PC can be deleted one by one by pressing RED key in the List When doing so the following text can be seen Do you want to unregister this PC Yes No defau
71. em Setup menu and press OK Select Channels and press OK The satellite channel list will appear Channels Satellite TV Line No 3 20 Pos Name 1 DDD 19 2 E mm 2 AB 19 2 E m E 19 2 E mm 22 5 E mE 22 5 E m 22 5 E m 25 6 E imi 25 6 E mm Satellite 801 BBC 802 BB 803 BA 822 AA 823 AC For your convenience you can edit and sort your channel list Line Number Jump Press the number buttons 0 9 to input the line number you want to select and press OK Satellite Jump Press K or PPI to jump to the next channel on a different Satellite Renumber Same as Antenna Cable channels See page 27 Move Same as Antenna Cable channels See page 28 Position No Sort Press the YELLOW button A confirmation window will appear Press or P to select Yes and press OK Standby Channel Update If the Standby Channel Update is set to On when the TV is in standby mode Digital Tuning is automatically executed oO Select DTV Settings from the System Setup menu and press OK Press W to select Standby Channel Update and press or to select On Location setting You can select either Home or Store mode Home is recommended for normal home use Select Store when using the television for displaying in a shop etc Select Location from the System Setup menu pess Aor P to select Home or Store Analogue switch off This is a digital television which is integr
72. en to music from a Multi View of available files Multi View USB Music oO MUSIC BB Frolder solect Folder or Fle 5 9999 S n0o000x mp3 300000000 mp3 n 0o000x mp3 300000000 mp3 S w0o000 mp3 Press A W 4P to select a file or folder PA or K A Pv or X Y buttons can be used to page up down the Multi View when there are more files than will fit onto one screen NOTE The page down function on the last page and page up function on the first page are not available When you select a folder press OK to move to the next layer Press BACK to move back to the previous layer With the desired file selected press OK or B play to start playback NOTE If you highlight the file without pressing OK the content is played on a Multi View When OK is pressed it is played in full screen mode NOTE Depending on the file size it may take some time for playback to begin Press Ill to stop playback During playback you can adjust the Sound menu functions from the Quick Menu During playback Press IMI to pause To resume normal playback press B gt play PAUSE may not be available depending on the contents or DMS To play in fast reverse or fast forward directions press 44 or PP Each time you press 44 or PP the playback speed will change 64 To set the repeat mode Press QUICK to open the Quick Menu Press A or W to select Repeat Press or to select Off All or 1
73. ent Press ontheremote Press and hold control on the TV Inputs DTV Ant DTV Sat 1 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 PC ATV HDM displays equipment connected to Input HDMI on the back or side of the television PC displays a computer connected to Input RGB PC on the back of the television CONTROLS AND FEATURES Labeling video input sources These input labels are shown in the input selector You can label video inputs according to the devices you have connected to the Press MENU 4 to highlight Setup icon Press A 4 to highlight Preferences icon and press OK Press A or W to select AV Connection Preferences REGZA LINK Setup Network Setup Guide Type Network Device Setup Teletext Network Lock Panel Lock AV Connection Press OK to display the AV Connection menu Press A or W to highlight Input Labeling and press OK AV Connection Input Labeling Digital Audio Output Press A or W to select Input Labeling and press OK Input Labeling Input EXT 1 EXT 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 PC Press A or W to select the item you want to label and then press Kor to select Amplifier Cable DVD Game PC Recorder or Satellite Repeat step 7 for other video inputs 76 Digital Audio Output When connecting a surround sound amplifier to the digital audio output Sony Philips Digital Interface Format S PDIF the following options can be selected or adjus
74. ent amplifier etc adjustment may not be possible When the optical digital output setting Auto gt PCM is changed it may be necessary to adjust the timing again Do not use other than for audio output from the AV amplifier etc Malfunction may occur CONTROLS AND FEATURES Using REGZA LINK This is a new feature that uses CEC technology and allows you to control Toshiba REGZA LINK compatible devices from the television remote control via HDMI connection page 12 When the Enable REGZA LINK item in the REGZA LINK Setup menu is set to On individual functions also set to On will be activated Enable REGZA LINK Press MENU 4 to highlight Setup icon Press A 4P to highlight Preferences icon and press OK Press A or W to select REGZA LINK Setup and press OK Press W to select Enable REGZA LINK and press or P to select On REGZA LINK Setup Enable REGZA LINK TV Auto Power Auto Standby Amplifier Control Initial Speaker Setting TV Speakers NOTE If you set Enable REGZA LINK to Off all other items will be grayed out TV Auto Power The TV Auto Power setting allows the television to be automatically switched on if a REGZA LINK device is turned on In the REGZA LINK Setup menu press W to highlight TV Auto Power Press or P to select On or Off Auto Standby When Auto Standby is enabled the television when switched off will automatically switch off standby mode all connected REGZA L
75. eriod of time For Example If you move away from the TV for a short period such as when the phone rings while you are watching TV you can easily pause live TV and then continue to view from the same point in the programme when you return Press IMI on the remote control while viewing the DTV programme The screen will switch to a still image and recording will start automatically The recording time is decided by TimeShift Size If the TimeShift file size reaches the limit set then the TV will continue to be paused but the recording buffer will be reset to the beginning Press play Catch up viewing will start from where the programme was paused Press ll stop to stop the recording 54 To set the padding time for programmed recording start time and end time In the Recording Setup screen press A or W to select Start Padding Time Press orP to select a time You can select from None 3 minutes 5 minutes 10 minutes 15 minutes 30 minutes and 45 minutes Recording will start at the selected number of minutes prior to the recording start time Press A or W to select End Padding Time Press orP to select a time You can select from None 3 minutes 5 minutes 10 minutes 15 minutes 30 minutes and 45 minutes Recording will end at the recording end time plus the selected number of minutes To perform a USB HDD operation test Inthe Recording Setup screen press A or W to select Device Tes
76. ettings Channels Subtitle and Audio Parental PIN Setup Parental Control Local Time Setting Standby Channel Update Common Interface Using the number buttons enter a four digit number Once entered you will be prompted to confirm by entering again PIN Setting New PIN Confirm PIN The PIN number is now set If the PIN code has been set when Auto Tuning and Reset TV are executed entering the PIN will be necessary 0000 is not acceptable CONTROLS AND FEATURES Parental Setup The Parental Control feature allows you to block programmes according to their rating levels Ifa PIN has been set you willneed to enter it before adjusting the level In the DTV Settings menu press A or W to select Parental Control and press OK Buse dor to choose an option None or an age setting 4 17 or 4 18 depending on the Country setting Parental Control Parental Setup 4 None gt To view blocked programmes enter the PIN To reactivate the Parental Control turn the TV off and then on again Network Lock You can use the Network Lock feature to prevent the Web browser from launching When this feature is set to On PIN input will be necessary to use network functions This feature will be grayed out until a PIN is set Press MENU lt P to highlight Setup icon DB bress A 4P to highlight Preferences icon and press OK Press amp or Wto select Network Lock Preferences 3D Setup Recording Setup
77. etwork Name by using the Software Keyboard To save your setting press the BLUE button Press Aor W to select Authentication and then press Aor P to select Open System Shared Key WPA PSK or WPA2 PSK Press A or W to select Encryption and then press lt or P to select None WEP TKIP or AES NOTE Certain encryption types are only compatible with specific authentication types When Authentication is Open System only WEP or None is compatible When Authentication is Shared Key only WEP is compatible When Authentication is WPA PSK or WPA2 PSK only TKIP or AES is compatible When incompatible Authentication Encryption pairings are detected a warning message will be displayed and no connection attempt will be made until the incompatibility is resolved There is only one key ID to set for WEP encryption Press A or W to select Security Key and press OK Input the Security Key by using the Software Keyboard page 47 To save your setting press the BLUE button This item is grayed out when Encryption is None When Encryption is WEP Key ID setting is available Press amp or W to select Key ID and press or P to select 1 default 2 3 or 4 Press A or W to select Done and press OK When the message Wireless configuration is complete appears on screen press OK NOTE Settings are not saved if BACK is pressed before Done is selected 18 B The Advanced Network Setup screen will ap
78. f 3D images often appear in double or if you cannot see the images in 3D stop viewing Continuous viewing may cause eye strain Due to the possible impact on vision development viewers of 3D video images should be age 6 or above Children and teenagers may be more susceptible to health issues associated with viewing in 3D and should be closely supervised to avoid prolonged viewing without rest Watching TV while sitting too close to the screen for an extended period of time may cause eye strain The ideal viewing distance should be at least three times the screen height If the 3D PIN number has been forgotten Use the Master PIN code of 1276 and then change to a number of your choice Select 3D PIN from the Preferences 3D Setup menu to enter PIN INSTALLING YOUR TV Notes on handling the 3D glasses liquid crystal shutter lenses Do not put excessive force on the lenses Do not scratch the surface of the lenses with sharp objects Do not drop or bend the 3D glasses Notes on IR communication Do not block the IR sensor for 3D glasses on the TV by placing objects in front of it Do not cover the IR sensor on the 3D glasses with stickers or labels Keep the IR sensor on the 3D glasses clean The use of 3D glasses could interfere with other IR communication devices Other IR communication devices may cause the 3D glasses not to work correctly Use the TV and 3D glasses in a place where they will not in
79. ge 11 Some early HDMI equipment may not work properly with the latest HDMI TV products due to new standard adoption Why don t the REGZA LINK devices work When the connected REGZA LINK device does not work correctly after you have changed the settings of the device turn off your television and unplug the power cord and then plug and turn on again Unplug the HDMI cable of the REGZA LINK device and lead again Why is the REGZA LINK logo still showing when the equipment has been disconnected If the REGZA LINK device is disconnected the logo will disappear after approximately one minute Why don t the networked devices work The LAN cables are not connected properly or at all Connect all cables see page 14 Make sure your network address is set up correctly see page 45 Why doesn t the wireless network work Make sure the TOSHIBA Dual Band WLAN Adaptor is used see page 14 Check that the AP is powered on PROBLEM SOLVING gt O xd SIS gt g Why doesn t the Media Player feature operate Other problems If your TV s problem is not addressed in this Questions and Answers section or the recommended solution has not Make sure that devices are connected correctly worked do one of the following Incorrect behaviour may occur with a USB Hub connection 1 Turn off your TV After 30 seconds turn it on Check your network setup if using DLNA CERTIFIED 2 Turn off the TV and unplug the
80. ghlight Media Player icon Press amp 4P to highlight USB Media Player and press OK 3 Press A or W to select Media Player setup and press OK 4 Press A or W to select USB Auto Start and press or P to select On or Off Auto Start oO Insert USB device into the USB socket on the left side of the TV A prompt will appear E Press dorP to select Yes and press OK Press A or W to select Photo Movie or Music and press OK O Select the connected USB device and press OK Multi View will appear NOTE If Auto Start is set to Off you can start the Media Player manually Manual Start oO Insert USB device into the USB socket on the left side of the TV Press MENU 4 to highlight Media Player icon Press A P to highlight USB Media Player and press OK Press A or W to select Photo Movie or Music and press OK Select the connected USB device and press OK Multi View will appear To select a file in the Multi View Press AV 4 to select a file or folder 2 Press OK to move to the next layer or press BACK to return to the previous layer NOTE You can also return to the previous layer by selecting the icon at the top left of the Multi View screen and pressing OK To close the Media Player press Exit 58 CONTROLS AND FEATURES Using the Media Player with a DLNA CERTIFIED Server You need to configure a home network before using this feature see page 14 Press MEN
81. gramme may not be recorded When End Padding Time is set for the first programmed recording see page 54 depending on how far the scheduling times overlap the End Padding Time may be ignored and recording of the next scheduled programme may start As priority is given to the time set in the Set Timer menu over the Padding Time recording will automatically be triggered when the next scheduled programme start time is reached during End Padding Time CONTROLS AND FEATURES Using Toshiba Places A new cloud based service where content movies photos etc can be viewed and shared across the web through a simple user interface called Toshiba Places NOTE You need to configure a home network before using this feature see page 14 rsss GJ onthe remote control or press MENU 4 gt to highlight Connected TV icon and press A 4P to highlight Toshiba Places icon and press OK Press AW P to select the desired place and press OK NOTE Some features require an always on broadband internet connection firmware update and or additional bandwidth dedicated to this product Third party internet services may change or be discontinued or restricted at any time Toshiba makes no warranties representations or assurances about the content availability or functionality of third party content or services Use of third party internet services may require registration by a computer and or payment of charges and membership
82. he CAM A box will appear on screen to confirm that the CAM has been inserted Press MENU 4 to highlight Setup icon Press A 4 to highlight System Setup icon and press OK Press A or W to select DTV Settings and press OK Press A or W to select Common Interface and press OK O Details of the CAM should now be available NOTE Software update of a CI Plus CAM may occur automatically if instigated by the broadcaster This could cause the cancellation of any Reminders Recordings during this process Some Cl or Cl CAM may not be supported Cl operation is not guaranteed except for Canal Ready DTT services on suffix FC models Software Upgrade and Licences Searching for New Software If preferred software upgrades can be searched for manually using Search for New Software oO In the System Setup menu press A or W to select Software Upgrade and press OK 2 Press A or W to select Search for New Software Press OK The television will automatically start searching for a software upgrade the progress bar will move along the line SEARCHING FOR NEW SOFTWARE Searching for a new software upgrade for this TV 48 M CH 31 If an upgrade is found the television will automatically start downloading If not a screen will appear stating that an upgrade is unavailable Network Upgrade TOSHIBA may offer upgrades for the TV s software in the future The TV s software is upgraded via the Network
83. he PC signal may not be detected correctly 13 To connect a PC to the HDMI terminal When connecting a PC to the HDMI terminal on the television use an HDMI to DVI adaptor cable If connecting a PC with an HDMI terminal use an HDMI cable type A connector the back of your television Computer HDMI to DVI adaptor cable Y For acceptable PC and video signal formats see page 87 NOTE The edges of the images may be hidden If connecting a certain PC model with a unique PC signal the PC signal may not be detected correctly CONNECTING YOUR TV Connecting a home network The LAN port allows your Toshiba TV to connect to your home network You can use this revolutionary home entertainment networking system to access photo video and audio files that are stored ona DLNA CERTIFIED server and play display them on your TV NOTE If you connect to a shared network outside your home it is advisable to use a router Always use DLNA CERTIFIED products in private network environments Connect this TV to the same router as other DLNA CERTIFIED products server If you use a hub or switch to connect the TV to your home network you may not be able to use the automatic setup and will have to manually set up the network address See page 45 If you use a router with built in DHCP functionality use the automatic setup Manual setup may not work If you connect the TV and PC dir
84. he use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organization Such restrictions may apply in environments where the risk of interference to other devices or services is perceived or identified as harmful If you are uncertain of the policy that applies to the use of wireless devices in a specific organization or environment you are encouraged to ask for authorization to use the Wireless LAN device prior to turning on the equipment This Dual Band Wireless LAN Adaptor may be operated in the ollowing countries AT Austria Is Iceland BE Belgium LI Liechtenstein CH Switzerland LT Lithuania cY Cyprus LU Luxembourg CZ Czech Republic LV Latvia DE Germany MT Malta DK Denmark NL Netherlands ES Spain NO Norway FI Finland PL Poland FR France PT Portugal GB United Kingdom SE Sweden GR Greece SI Slovenia EE Estonia SK Slovakia HU Hungary BG Bulgaria IT Italy RO Romania IE Ireland TR Turkey How to use this Dual Band Wireless LAN Adaptor If this device is going to be operated in the frequency range of 5 15 GHz to 5 35 GHz it is restricted to indoor use If this device is going to be operated for 802 11 b g n function in the frequency range of 2 454 GHz to 2 4835 GHz in France it is restricted to indoor use A general authorization is required for using this device outdoors or in public places in Italy This device
85. hese off before beginning use USB terminal When charging the battery connect to the TV with the battery charge cable Infrared reception part Receives the infrared signal for the liquid crystal shutter control sent from the television 30 To set the 3D glasses When you use for the first time peel off the protective films from the lenses Peel off Turn the 3D glasses on with the power switch NOTE If the infrared data communication between the television and 3D glasses is lost for 5 minutes the 3D glasses turn off automatically to preserve battery life To charge the battery If the 3D glasses are turned on while the battery power is low the power light will blink 5 times If the battery is dead the power light will not blink or light Turn the 3D glasses off with the power switch and connect to the TV with the battery charge cable NOTE If the 3D glasses are turned on the battery will not charge When the TV is turned off or in standby mode the battery will not charged When charging the battery the use of a USB cable other than the battery charge cable supplied is not covered by warranty The power light will Light up When the light goes out the charging is completed NOTE It takes approximately two hours to charge the battery If the usage time is extremely short even after the battery has been charged fully the battery may be worn out Contact your dealer
86. ide Jump to Programme Guide EPG Genre Search Jump to Genre Search Programme Timers Jump to Programme Timers Library Jump to Library USB Media Player USB Media Player Menu Network Media Player Network Media Player Menu Connected TV lt gt Toshiba Places Jump to Toshiba Places NOTE This menu item is subject to Function P woi Be change without notice On Timer On Timer Menu Sleep Timer Sleep Timer Menu Intel Wireless Display Jump to Intel Wireless Display gag Picture Picture Menu Sound Sound Menu Preferences Preferences Menu System Setup System Setup Menu 16 SETTING UP YOUR TV Startup Application Before switching on the TV make sure your decoder media recorder if applicable is in standby To set up the television use the buttons on the remote control as detailed on page 9 Quick Setup Press the button The Menu Language screen will appear This screen will appear the first time that the television is switched on and each time Reset TV is selected Press A V 4P to select the menu language and press OK Highlight Country and press lt or P to select The television is now set to tune the stations for your country Quick Setup Country Germany German Turkish Primary Subtitle Language Secondary Subtitle Language Primary Audio Language German Seconda
87. ider should have provided these to you Auto setup In the Preferences menu press A or W to select Network Setup and press OK Press Aor W to select Advanced Network Setup and press OK Press A or W to select DNS Setup and press OK Press A or W to highlight Auto Setup and press or P to select On NOTE Other items will be grayed out when Auto Setup is set to On Manual setup In the Preferences menu press A or W to select Network Setup and press OK Press Aor W to select Advanced Network Setup and press OK Press A or W to select DNS Setup and press OK Press A or W to select Auto Setup and press or gt to select Off DNS Setup Auto Setup Primary DNS Address Secondary DNS Address XXX Press A or W to select Primary DNS Address Press or to highlight the field you want to change and then use the number buttons to input the Primary DNS Address To save the setting press OK NOTE DNS address field numbers must be between 0 and 255 If you input an incompatible number and press OK the field number will reset to the previous value Press A or W to select Secondary DNS Address and edit in the same way as Primary DNS Address MAC Address You can view the fixed MAC address for the TV and for the Dual Band WLAN Adaptor if one is installed In the Preferences menu press A or W to select Network Setup and press OK Press Aor W to select Advanced Network Setup and press OK Press A or W
88. ignals through the PC terminal The PC input on this TV only accepts signal formats which are compliant with VESA DMT as shown in the table below Since some PCs input signals which are different from the resolution and frequency described in the table below the following phenomenon may occur incorrect display false format detection picture position failure blur or judder In this case set the monitor output format on your PC to conform to a signal in the table below Format Resolution V Frequency H Frequency Pixel Clock Frequency VESA Standard DMT VGA 640 x 480 59 940Hz 31 469kHz 25 175MHz e 72 809Hz 37 861kHz 31 500MHz 75 000Hz 37 500kHz 31 500MHz e SVGA 800 x 600 56 250Hz 35 156kHz 36 000MHz 60 317Hz 37 879kHz 40 000MHz 72 188Hz 48 077kHz 50 000MHz e 75 000Hz 46 875kHz 49 500MHz e XGA 1024 x 768 60 004Hz 48 363kHz 65 000MHz e 70 069Hz 56 476kHz 75 000MHz 75 029Hz 60 023kHz 78 750MHz amp WXGA 1280 x 768 59 995Hz 47 396kHz 68 250MHz e 59 870Hz 47 776kHz 79 500MHz 74 893Hz 60 289kHz 102 250MHz e 1280 x 800 59 810Hz 49 702kHz 83 500MHz 1360 x 768 60 015Hz 47 712kHz 85 500MHz e WXGA 1440 x 900 59 887Hz 55 935kHz 106 500MHz SXGA 1280 x 1024 60 020Hz 63 981kHz 108 000MHz 75 025Hz 79 976kHz 135 000MHz e 1080p 1920 x 1080p 60 000Hz 67 500Hz 148 500MHz 86 INFORMATION Acceptable video or PC signals through the
89. illbe NOTE Press the RED button to scan for all APs displayed and no connection attempt will be made until the incompatibility is resolved Item Description There is only one key ID to set for WEP encryption Statis Connected is displayed when the TV is O g connected with the AP Press A or W to select Security Key and press OK Disconnected is displayed when the TV is not connected with the AP 10 Input the Security Key by using the Software Signal Connection signal strength with AP Keyboard see page 47 To save your setting press STRONG MEDIUM WEAK the BLUE button Speed Linkwith AP NOTE This item is grayed out when Encryption is Mode Working mode 11a 11b 11g 11n None Network Name SSID set 11 Highlight Done and press OK Authentication Authentication set NOTE When Encryption is None a message will Enciyption Encryption set appear Press or P to select Yes and press OK Security Key Security Key set NOTE Settings are not saved if BACK is pressed before Done AP MAC The AP s MAC address is displayed when is selected Address the TV is connected with the AP TV MAC The MAC address of the USB Dual Band Address WLAN Adaptor is displayed DHCP Enabled is displayed when using DHCP Disabled is displayed when not using DHCP IP Address The TV s IP address Subnet Mask Value of the Subnet Mask Default Address of the Default GATEWAY Gateway DNS Address of the DNS 44 CONTROLS AND FEATURES NOTE Even if an
90. ins plug and all mains connections There is a picture but why is there little or no colour Q A When using an external source for instance a poor quality video tape if there is little or no colour improvements may sometimes be achieved The colour is factory set to Auto to automatically display the best colour system To check that you have the best colour With the external source playing select Colour System from the System Setup menu System Setup Menu Language English Germany Auto Country Colour System lt Lau With lt or P choose between Auto PAL SECAM NTSC 4 43 or NTSC 3 58 Why doesn t the video DVD being played show on screen Make sure the media recorder or DVD player is connected to the television as shown on page 10 and then select the correct input by pressing Why is there a picture but no sound Check all lead connections No sound or unacceptable format sound may be received Check the volume has not been turned down or that sound mute has not been selected Check shared audio settings SS ao o 81 9 gt O What else can cause a poor picture Interference or a weak signal Try a different television station Manual Fine Tuning may help Select the ATV Manual Tuning menu Highlight the station and press OK Then press P to select Manual Fine Tuning Using A or W adjust to get the best picture and sound Press OK and then EXIT ATV Manual Tuning Manual
91. io frequency range and may interfere with one another If you use Bluetooth and Wireless LAN devices simultaneously you may occasionally experience a less than optimal network performance or even lose your network connection If you should experience any such problem immediately turn off either your Bluetooth or Wireless LAN device Actual performance can vary including lower wireless network capacity data throughput rate range and coverage Performance depends on many factors conditions and variables including distance from the access point volume of network traffic building materials and construction operating system used mix of wireless products used interference and other adverse conditions 42 Wireless LAN and your Health Wireless LAN products like other radio devices emit radio frequency electromagnetic energy The level of energy emitted by Wireless LAN devices however is far less than the electromagnetic energy emitted by wireless devices such as mobile phones Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations TOSHIBA believes Wireless LAN is safe for use by consumers These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature In some situations or environments t
92. ion OK Inputs the selected character 0 9 Inputs the number directly Ava Moves the character highlight lt lt gt gt Moves the cursor Ke Moves the cursor to the head of a character string gt gt I Moves the cursor to the end of a character string RED Deletes 1 character to the left of the cursor GREEN Cycles through upper case lower case numbers and symbols if available BLUE Saves changes and closes the Software Keyboard window BACK Closes the Software Keyboard window without saving changes 47 In the Preferences menu press A or W to select Network Device Setup and press OK Preferences 3D Setup Recording Setup REGZA LINK Setup Network Setup Guide Type Network Device Setup Teletext Network Lock Press A or W to select External Control Setup and press OK Press A or W to select an option and press OK The Software Keyboard window will appear User Name Input the User Name to control the TV from the iPhone etc by using the on screen software keyboard see page 47 The maximum number of characters is 16 Password Input the Password to control the TV from the iPhone etc by using the on screen software keyboard see page 47 The maximum number of characters is 16 NOTE Toshiba does not guarantee normal operation with all connected devices CONTROLS AND FEATURES Device Name Setup The TV s device name can be changed In the Preferences menu press A o
93. ion may occur CINEMA When watching all sides panel format films video tapes this setting will eliminate or reduce the black bars at all sides of the screen by Zooming in and selecting the image without distortion When subtitles are included ona letterbox format broadcast this SUBTITLE setting will raise the picture to ensure that all the text is displayed SUBTITLE P Use this setting when watching a 14 9 14 9 broadcast 000 0 00 37 CONTROLS AND FEATURES This setting will show the picture NATIVE without overscan i e WYSIWYG This setting will show the picture without overscan i e WYSIWYG PC NORMAL This option is only available when watching a PC signal source via HDMI or PC terminal This setting will show the picture without overscan or side panels PC WIDE This option is only available when watching a PC signal source via HDMI or PC terminal Dot by Dot is anon scaling display Depending on the input signal format the picture is displayed with side panels Dot by Dot and or bars at the top and bottom e g VGA input source Press the 4 button on the Remote to display the list of available widescreen formats Press the button repeatedly to highlight the required format The Quick Menu feature can also be used to select Picture Size AV format PC format Picture Size Picture Size Wide PC Normal 4 3 PC Wide Super Live Dot by Dot Cinema Subtitle 14 9
94. ion no compensation shall be paid If there is a power failure or the power plug is disconnected during programmed recording recording will stop and will not resume when the power returns or the plug is reconnected Do not disconnect the power plug when the indicator LED is lit Any changes implemented by the broadcasting station may affect programme scheduling Scheduling of multiple consecutive programmes may result in the beginning of each programme not being recorded Programmed recording cannot take place if the power plug is not connected Disconnecting the power plug during recording may result in failure to save the recorded programme USB HDD recording feature is not available in all countries Do not turn off the TV during recording When the USB HDD is formatted all the data stored on the HDD will be erased 49 Setting up the USB HDD for recording To connect an USB HDD not supplied To USB1 or USB2 USB HDD DD gt USB cable not supplied sell When you connect a USB HDD to the USB port on the TV a prompt will appear Press dorP to select No and press OK NOTE Not guaranteed to work with all USB HDD To record DTV programmes One Touch Recording To record the programme currently being viewed oO Press the REC button on the remote control The currently viewed programme will start to be recorded The programme indicator red will be lit To sto
95. itles are listed press the BLUE button Press OK Viewing starts icon appears next to the title currently being recorded When the title currently being recorded is selected and OK is pressed playback will start from the beginning of the programme currently being recorded Operations during viewing The following operations can be performed using the remote control buttons To PLAY gt gt To FAST FORWARD To STOP gt gt To SKIP FORWARD To PAUSE STEP lt gt To shift playback position To SKIP BACK To REWIND Operations from the Library screen As well as viewing the list of recorded titles on the Library screen you can protect or delete titles and register titles to Personal Mode To display the Library screen Press MENU 4 gt A 4 P to highlight TV Programmes Library icons and press OK The Library screen will appear O 14 15 Wed 16 Feb Wed 16 Feb 10 00 A ry Wed 16 Feb 10 00 Thu 17 Feb 10 00 Thu 17 Feb 10 00 Leth I Library All Sort New Fri 18 Feb 10 00 Fri 18 Feb 10 00 Fri 18 Feb 10 00 Sat 18 Feb 10 00 Sun 18 Feb 10 00 Sun 18 Feb 10 00 USB HDD3 Sun 18 Feb 10 00 Remaining Capacity Mon 18 F6b10 00 y 86 912 0GB E 1235 ITV London 10 July 2011 14 30 01 30 CONTROLS AND FEATURES To protect or unprotect a recorded programme Protecting a programme prevents it from being accidentally deleted Select the title of the programme you want to prot
96. ive mode NOTE Depending on the input mode the display mode switches between 2D and 3D 32 CONTROLS AND FEATURES Setting the auto start mode Controls what the TV does when it detects a 3D signal Press MENU lt P to highlight Setup icon B bress A 4P to highlight Preferences icon and press OK 3 Press A or W to select 3D Setup and press OK Preferences 3D Setup Recording Setup REGZA LINK Setup Network Setup Guide Type Network Device Setup Teletext Network Lock O Press A or W to select 3D Auto Start B Press or P to select 3D 2D or Off Option Description 3D Displays as 3D mode automatically when 3D format signal is received 2D Displays as 2D mode automatically when 3D format signal is received off Displays a screen that allows you to select 3D or 2D when 3D format signal is received Adjusting 2D to 3D Depth You can adjust the level of 3D From the Menu oO In the Preferences menu press A or W to select 3D Setup and press OK 2 Press A or W to select 2D to 3D Depth 3 Press or P to select 1 2 3 4 or 5 The higher the number the stronger the 3D effect From the Quick Menu oO Press QUICK on the remote to open the Quick Menu 2 Press A or W to select 2D to 3D Depth 3 Press or P to select 1 2 3 4 or 5 The higher the number the stronger the 3D effect NOTE Depending on the content setting the 3D effect to a high level
97. l strength Highlight Done and press OK 22 If the reception testing completes successfully the Auto Tuning startup screen will display Auto Tuning Satellite Start Scan Satellite ASTRA 19 2 E Free to Air Search Option You can select Search Option between Free to Air and All 123 Press A or W to highlight Start Scan and then press OK The television will start to search for available DVB S channels The progress bar will indicate the scan status When the search is complete the Auto Tuning results screen will display the total number of services found 24 Use A or W to move through the list to select a channel and then press OK to view PLEASE NOTE The Quick Setup menu can also be accessed at any time from the Setup System Setup menu Ant Cable Satellite if available From this menu you can set the RF input configuration press MENU lt P to highlight Setup icon B bress A 4P to highlight System Setup icon and press OK 3 Press W to select Ant Cable Satellite and press or P to select Antenna Cable or Satellite NOTE When you attempt to change the Ant Cable Satellite setting a warning message will appear followed by PIN entry if PIN has been set anda prompt for Auto Tuning SETTING UP YOUR TV When Ant Cable Satellite is set to Cable the following setting options will be provided in the Auto Tuning screen Press A or W to select an item and press or to selec
98. les the connection of a suitable surround sound system NOTE This output is always active Satellite dish 9 HDM High Definition Multimedia Interface is for use with a DVD decoder or electrical equipment with digital audio and video output For acceptable video or PC signal formats through the HDMI terminals see page 87 NOTE Although this television is able to connect to HDMI equipment it is possible that some equipment may not operate correctly LAN port is used to connect the TV to your home network This TV can play digital content stored on a DLNA CERTIFIED product with server function Awide variety of external equipment can be connected to the back of the television therefore the relevant owner s manuals for all additional equipment must be referred to for exact instructions If the television automatically switches over to monitor external equipment return to normal television by pressing the desired programme position button To recall external equipment press to select between TV EXT 1 EXT 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 or PC When the external input mode is selected while viewing DTV mode the SCART socket does not output video audio signals 10 CONNECTING YOUR TV Connecting an HDMI device The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device This input is designed to accept HDCP High Bandwidth Digital Content
99. lt cursor is No CONTROLS AND FEATURES Using the Media Player This TV allows you to enjoy movie music and photo files stored on a USB device connected to the USB port Moreover you can also play photos movies or music files from your PC by connecting the TV to your home network Terminology DMP DLNA CERTIFIED Player DMS DLNA CERTIFIED Server DMP The TV can control and play content from a DMS ADMS isa device that can function as a server for DMP NOTE Do not insert remove USB device while in use MENU is not available during playback Media Player Specifications Device USB device Interface version USB2 0 HS USB Mass Storage Class devices MSC NOTE Connectivity is not guaranteed for all devices Incorrect behaviour may occur with a USB hub connection File system FAT16 and FAT32 Maximum memory size Unlimited DLNA CERTIFIED Server Your PC for example You must obtain any required permission from copyright owners to download or use copyrighted content TOSHIBA cannot and does not grant such permission Basic operation Using Media Player with USB When Auto Start is enabled you will be asked if you want to start the Media Player whenever a USB device is inserted If Auto Start is disabled or if you want to connect toa DMS on the network you must manually start the Media Player from the menu To change the Auto Start setting Press MENU lt P to hi
100. ment is 220 240v AC 50 60Hz Never connect to a DC supply or any other power source DO ensure that the television is not standing on the mains lead Use only the supplied lead DO NOT cut off the mains plug from this equipment this incorporates a special Radio Interference Filter the removal of which will impair its performance IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN Do DO read the operating instructions before you attempt to use the equipment DO ensure that all electrical connections including the mains plug extension leads and inter connections between pieces of equipment are properly made and in accordance with the manufacturers instructions Switch off and withdraw the mains plug before making or changing connections DO consult your dealer if you are ever in doubt about the installation operation or safety of your equipment WARNING To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions See page 5 DO be careful with glass panels or doors on equipment DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND LIVE PARTS THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE Do not DO NOT obstruct the ventilation openings of the equipment with items such as newspapers tablecloths curtains etc Overheating will cause damage and shorten the life of the equipment
101. mer icon and press OK Use the number buttons to set the desired time For example to switch the television off in one and a half hours enter 01 30 or press P to increase decrease in steps of 10 minutes Maximum time setting is 12 hours Press EXIT to finish 0 6 To cancel the Sleep Timer enter all zeros for the above setting CONTROLS AND FEATURES Energy Saving Settings Automatic Power Down The TV will automatically turn itself off standby after 4 hours if you do not operate the TV either from the remote control or the TV control panel Press MENU 4 to highlight Setup icon Press A 4 P to highlight Preferences icon and press OK Press A or W to select Energy Saving Settings and press OK Press A or W to select Automatic Power Down Press or P to select On or Off NOTE This feature is set to On when Location is set to Home 1 minute before switching to standby a Warning message will appear When the following features are set the feature that is set for the nearest time will function Automatic Power Down Sleep Timer Auto shutdown after 1 hour of inactivity after power on by On Timer No signal auto power off after 15 minute of no signal No Signal Power Down The TV will automatically turn itself off after 15 minutes when no signal is detected You can change the setting to Off for the following purposes Low signal strength of analog channel no signal detecti
102. n of the System Setup menu Depending on country area some of this television s functions may not be available Reception of future additional or modified services can not be guaranteed with this television If stationary images generated by 4 3 broadcasts text services channel identification logos computer displays video games on screen menus etc are left on the television screen for any length of time they could become conspicuous It is always advisable to reduce both the brightness and contrast settings Very long continuous use of the 4 3 picture on a 16 9 screen may result in some retention of the image at the 4 3 outlines This is not a defect of the LCD TV and is not covered under the manufacturer s warranty Regular use of other size modes e g Super Live will prevent permanent retention EXCLUSION CLAUSE Toshiba shall under no circumstances be liable for loss and or damage to the product caused by i Fire ii Earthquake iii Accidental damage iv Intentional misuse of the product v Use of the product in improper conditions vi Loss and or damage caused to the product whilst in the possession of a third party vii Any damage or loss caused as a result of the owner s failure and or neglect to follow the instructions set out in the owner s manual viii Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment Furthermore
103. nd press again to cancel CONTROLS AND FEATURES Using your home network This TV is a DLNA CERTIFIED Player This TV can play digital content stored on a DLNA CERTIFIED product with server function If you want to use this TV as a DLNA CERTIFIED Player you will have to configure the network on your TV see page 14 If you want to use your home network you will have to configure the network on your TV see page 14 Change the network settings if necessary see Setting up the Network on page 43 When using a wireless home network Wireless Interoperability The TOSHIBA Dual Band WLAN Adaptor is designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum DSSS Orthogonal Frequency Division Multiplexing OFDM radio technology and is compliant to The IEEE 802 11 Standard on Wireless LANs Revision a b g n as defined and approved by the Institute of Electrical and Electronics Engineers The TOSHIBA Dual Band WLAN Adaptor is intended for use with the TL96 UL97 ML96 series LCD TV s and should not be used with any other devices Use of the WLAN Adaptor in other USB products may result in damage to the WLAN Adaptor and or the equipment Such use will void any warranty that may otherwise apply and TOSHIBA will have no liability for any damage that may result from such use CAUTION Bluetooth and Wireless LAN devices operate within the same rad
104. nergy saving We recommend that you use the television with the factory settings The factory settings are for energy saving Unplugging the mains plug will cut energy use to zero for all televisions This is recommended when the television is not being used for a long time e g when on holiday Reducing the brightness of the screen will reduce energy use Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills NOTE Putting the television into standby mode will reduce energy consumption but will still draw some power Using the menu system Press MENU on the remote control to display the menu The menu appears as a list of five topics As each symbol is selected by pressing or P on the remote control its respective options will appear above NOTE The same menu is displayed in DTV Digital TV and ATV Analogue TV modes however where some items are not available in a mode they will appear grayed out ILLUSTRATION SHOWS 407L963 n Ambient Light Sensor ORANGE LED Programme timer set digital only RED LED Recording RED LED Standby GREEN LED Power on To use the option press A and W on the remote control to move up and down and press or P to select your desired setting Using the TV controls and connections To turn on or off the TV press OAL To alter the volume press or
105. nical information about the selected multiplex Reset TV Selecting Reset TV will reset all TV settings including saved channels to their original factory values oO In the System Setup menu press A or to select Reset TV Press OK to select A screen will appear warning that all settings will be lost Press OK to continue When the set powers back on the Quick Setup screen will appear Press OK to advance the setup and perform an auto tune See Quick Setup section on page 17 PC Settings Horizontal and Vertical Position Connect the PC as shown in the Connecting a computer section and ensure that a picture is showing on the television screen The picture position may now be adjusted to suit personal preference Press MENU 4 to highlight Setup icon Press A 4P to highlight Preferences icon and press OK Press A or W to select Display Settings and press OK Press A or W to select PC Setting and press OK Display Settings Auto Format 4 3 Stretch Picture Position PC Settings 5 Press A or W to select an option and press or to adjust the settings PC Settings Horizontal Position Vertical Position Clock Phase Sampling Clock Clock Phase The Clock Phase matches the PC signal with the LCD display Adjusting this can clear horizontal stripes and picture blur In the Display Settings menu press A or W to select PC Settings and press OK 2 Press A or W to select Clo
106. nnel you want to skip in your channel list From the Quick Menu press W to select Channel Options and press OK Press P repeatedly to highlight the skip box Press OK to select A tick will appear in the box Repeat steps 1 through 4 for other channels Press EXIT NOTE Skipped channels cannot be selected by PY or PA but still be accessed by direct number entry when tuned a icon will be displayed in the banner to indicate as a skipped channel Locking channels Locking Channels stops the viewing of digital channels and they can only be accessed by entering the PIN oO Select the channel you want to lock in your channel list From the Quick Menu press W to select Channel Options and press OK Press repeatedly to highlight the lock box Press OK to select A tick will appear in the box Ifa PIN has already been set PIN entry will be required to set the locked channels Repeat steps 1 through 4 for other channels Press EXIT 0000 From this point on when any of the channels in the Locked Channel list are selected the PIN must be entered before they can be accessed Digital settings other settings Subtitles In digital mode this feature will show subtitles on the screen in the selected language provided they are being broadcast In the DTV Settings menu press A or W to select Subtitle and Audio and press OK Press W to select Subtitle Display and press or gt t
107. o Modes of viewing text Auto will display Fastext if available List will save your four favourite pages Selecting modes The text character set will be automatically chosen by the language setting in the Setup menu Press MENU lt 4P to highlight Setup icon B bress A 4P to highlight Preferences icon and press OK 3 Press A or W to select Teletext and then press or P to select Auto or List Preferences 3D Setup Recording Setup REGZA LINK Setup Network Setup Guide Type Network Device Setup Teletext Network Lock Text information The TEXT button To view text services press TEXT Press again to superimpose the text over a normal broadcast picture and again to return to normal viewing Channels cannot be changed until text is cancelled The first text page shown will be the initial page Any text page can be accessed by entering the 3 digit page number using the numbered buttons pressing the coloured buttons or pressing PA to advance to the next page and PV to go back to the previous page Sub pages The pages on the screen will dynamically update as sub pages are received If you open a page containing sub pages the sub pages are automatically displayed in sequence To quit automatic sub page change press or Once selected the sub page you are viewing will be highlighted and as the television loads any additional sub pages the colour of the numbers will change indicating that these pages
108. o display the index initial page Press i to access the index initial page The one displayed is dependant on the broadcaster TEXT To display a page of text Press TEXT to display text Press again to superimpose text over a normal picture Press again to return to normal television viewing Channels cannot be changed until this has been done To reveal concealed text To discover the solutions on quiz and joke pages press the button To hold a wanted page At times it is convenient to hold a page of text Press and will appear in the top left of the screen The page will be held on screen until the button is pressed again To enlarge the text display size Press once to enlarge the top half of the page press again to enlarge the bottom half of the page Press again to revert to normal size x To temporarily erase the text screen Press EX once to erase the text screen temporarily To recall the text screen press the button again To display news flashes Select the news flash page for the chosen text service see the index page of text service The news flashes will be displayed as and when they are broadcast Remember to cancel text before changing channels press the TEXT button twice 80 PROBLEM SOLVING Questions and Answers Below are the answers to some of the most common queries Q Why is there no sound or picture Check the television is not in standby mode Check the ma
109. o save To indicate that a Recording Timer has been set a clock icon will be displayed in the Next fields of the information screen A check mark will appear if the timer is a Reminder Timer CONTROLS AND FEATURES To display More Information On screen Information icons Using EPG Electronic Programme Guide Press QUICK to open the Quick Menu You can choose the desired EPG system between the Broadcast Guide or MediaGuide that needs a internet connection Press W to highlight More Information and press OK 68 Icon Description z 5 Service info m I Service type Using Broadcast Guide TV Radio Text Make sure you selected Broadcast Guide in the Guide Type Oud Skip menu of Initial Setup see page 19 This setup can also be done Audio info oO Mono from the Setup System Setup Quick Setup menu or Setup Stereo Preferences Guide Type menu any time 0 Dual mono select the on screen Guide by pressing GUIDE and CO Multichannel the Guide screen will appear highlighting details of oop Dolby Digital the channel and programme currently being viewed Dope Dolby Digital This may take a few moments to appear When HE AAC is cp decoded m Thu 26 su 11 52 Tue 26 Apr E T 11 30 J 12 30 13 00 13 30 14 00 gt gt AD Audio Description 4 AAAONE HHouses Behaving Ba Mind You KE Bargain Hunt MAAA News Audio Sub
110. o select On or Off Subtitle and Audio Subtitle Display Subtitle Type Normal Primary Subtitle Language English Secondary Subtitle Language English Audio Type Normal English Primary Audio Language Secondary Audio Language English 3 Press A or W to select Primary Subtitle Language or Secondary Subtitle Language and press or P to select an option The SUBTITLE button can be used to select subtitle on or off for the current channel only and to select the subtitle language if more than one subtitle is available Audio languages This feature allows a programme or film to be viewed with a choice of soundtrack language provided multiple language tracks are being broadcast oO In the Subtitle and Audio menu press A or W to select Audio Type and press or to select Normal or For Hard of Hearing 2 Press A or W to select Primary Audio Language or Secondary Audio Language and press or P to select an option If more than one soundtrack is available use the CDI I button to select between them CONTROLS AND FEATURES Common Interface The Common Interface Slot situated on the side of the television enables the insertion of a CAM Conditional Access Module and card These are purchased from a service provider and allow additional subscription broadcasts to be viewed For information see a service provider 1 Insert the CAM and card into the Common Interface Slot following the instructions provided with t
111. of your photos In this mode only files located in the selected directory will be played NOTE Pressing A or W while in the Slide Show mode will stop the slideshow and rotate the photo Press or gt to view the previous next photo Press to display file status information To set Interval Time and Repeat settings NOTE When in the DMS and Multi View modes this feature cannot be used Press QUICK to open the Quick Menu Press or to adjust the setting and press OK To set Background Music USB only Press QUICK to open the Quick Menu while in the Slide Show mode Press A or W to select Background Music and press or to select On The music file in the same folder as the displayed photo will start playing NOTE When the music file repeat mode is set to All see page 64 all the music files in the same folder as the photo will be played repeatedly To stop music file playback select Off in Background Music To start slide show press OK in the Single View mode Press A or W to select either Interval Time or Repeat 60 To zoom in out photos During the Single View mode or Slide Show mode the zoom function can be used RED button Zoom in USB x1 x2 x4 x8 zoom DMP x1 8 x1 4 x1 2 x1 x2 x4 x8 zoom GREEN button Zoom out USB x8 x4 x2 x1 zoom DMP x8 x4 x2 x1 x1 2 x1 4 x1 8 zoom BACK button Normal playback AY lt
112. om 59 940 60 000Hz 67 433 67 500kHz 148 352 148 500MHz Side by Side Half Top and Bottom 90 INFORMATION 3D Support Format DTV Video Format Aspect ratio V Fraquency 3D Structure 480i 480p 16 9 59 940 60 000Hz Side by Side Half Top and Bottom 576i 576p 16 9 50 000Hz Side by Side Half Top and Bottom 720p 16 9 59 940 60 000Hz Side by Side Half Top and Bottom 50 000Hz Side by Side Half Top and Bottom 1080i 16 9 59 940 60 000Hz Side by Side Half Top and Bottom 50 000Hz Side by Side Half Top and Bottom 1080p 16 9 24 000Hz Side by Side Half Top and Bottom 30 000Hz Side by Side Half Top and Bottom 50 000Hz Side by Side Half Top and Bottom 59 940 60 000Hz Side by Side Half Top and Bottom Side by Side Full is composed of left and righ Side by Side Full Side by Side Half stereoscopic pictures that each size is equal to 2D L 2D Video 3D Video L R 2D Video 3D Video 91 INFORMATION Specifications and accessories Receiving systems DVB T Broadcast systems channels Broadcast systems channels UK UHF 21 68 PAL I UHF UK21 UK69 France VHF 05 10 VHF 01 05 PAL B G UHF E21 E69 UHF 21 69 VHF E2 E12 1 S41 Germany VHF 05 12 SECAM L UHF F21 F69 UHF 21 69 VHF F1 F10 B Q Austria VHF 05 12 SECAM D K UHF R21 R69 UHF 21 69 VHF R1 R12
113. om the Noise Reduction menu 2 Press 4orP to select Low Middle High Auto or Off The differences may not always be noticeable for the best result use lower settings as picture quality can be lost if the setting is too high Active Vision This feature will reduce picture blur without decreasing image brightness or adding flicker oO In the Advanced Picture Settings menu press A or Y to select Active Vision 2 Press or P to select High Middle Standard or Off NOTE When Picture Mode is set to Game this feature will be grayed out and automatically set to Off Resetting the advanced picture settings This feature allows you to reset the current Advanced Picture Settings to the default values oO In the Advanced Picture Settings menu press A or YV to select Reset Press OK Automatic Format Widescreen When this television receives a true Widescreen picture and Auto Format is On it will automatically be displayed in Widescreen format irrespective of the television s previous setting Press MENU 4 to highlight Setup icon Press A 4 to highlight Preferences icon and press OK Press A or W to select Auto Format and press or to select On or Off Display Settings Auto Format 4 3 Stretch Picture Position PC Settings Press A or W to select Display Settings and press OK 4 3 Stretch When 4 3 Stretch is activated the size switching system changes 4 3 programmes into full screen picture
114. on Only Audio L R is connected to external input to listen to music through the TV speakers oO In the Energy Saving Settings menu press A or W to select No Signal Power Down and press OK 2 Press A or W to select the item you want to change and press or P to select On or Off NOTE Default setting is all On Awarning message will appear 1 minute before turning off 67 Digital on screen information When viewing in digital mode the on screen information and programme guide provide access to programme details for all available channels Information Press the information screen will appear giving details of the channel and programme currently being viewed Display Example E 8888 rvi London CO JAD English 30 20 ESEO ASTRA19 2 E at 6 00 Thu 11 Oct EX MLB Young s two run triple leads AL over NL HD 16 9 S q AD 18 W News 6 00 8 00 15 min left Next MOETEN Also MEROE Change Press A or W to select the Now Next or Also information guide The selected information content will appear To record the next scheduled programme select Next and press OK The Edit Timer screen will appear Edit Timer The Daily Politics Emm 2 CABC Channel 11 30 12 30 Tue 26 Apr 10 50 Tue 26 Apr Timer Type Recording Set Timer The details of the programme will already have been added to the timer Highlight Set Timer and press OK t
115. p recording Press the Il stop button A confirmation window Do you want to stop Recording will appear B Press dorP to select Yes and press OK Recording will stop CONTROLS AND FEATURES How to set recordings via the Programme Guide Programmed recording can be scheduled easily using the Programme Guide or by specifying the date and time PLEASE NOTE When a timed programme is about to start an information screen will appear offering the option of watching or cancelling the programme Other channels will not be available during the timed programme unless the programme timer is cancelled It will only be possible to create or edit programme timers for the currently tuned DTV input Using the Programme Guide to set future recordings Press the GUIDE button on the remote control or select TV Programmes Guide menu from the menu system to display the Electronic Programme Guide EPG Press A W lt P to highlight the programme you want to record Press OK The Edit Timer menu will appear Edit Timer The Daily Politics Mmm 2 CABC Channel 11 30 12 30 Tue 26 Apr 10 50 Tue 26 Apr Timer Type Recording Set Timer Press A or W to highlight Timer Type and press or P to select Recording Press A or W to highlight Set Timer and press OK The ORANGE LED will be lit 50 To search for and record a programme using Genre Search Press MENU 4 P gt A 4 P to highlight TV Progr
116. p3 MPEG 1 2 Layer 3 yes yes lt USB gt MP4 mda MPEG 2 4LC AAC yes no Maximum number of files 1000 folder WMA wma WMA7 8 9 Std yes no WMA9 Pro yes no WAV wav LPCM yes no ADPCM MPEG 1 2 Layer 3 WMA7 8 9 Std WMA9 Pro LPCM no yes 89 INFORMATION 3D Support Format HDMI Resolution Aspect ratio V Fraquency H Fraquency Pixel Clock Frequency 3D Structure 720 x 480p 16 9 59 940 60 000Hz 31 469 31 500kHz 27 000 27 027MHz Side by Side Full Side by Side Half Top and Bottom 720 x 576p 16 9 50 000Hz 31 250kHz 27 000MHz Side by Side Full Side by Side Half Top and Bottom 1280 x 720p 16 9 59 940 60 000Hz 90 0 89 91kHz 148 352 148 500MHz Frame Packing 44 955 45 000kHz 74 176 74 250MHz Side by Side Half Top and Bottom 50 000Hz 75 000kHz 148 500MHz Frame Packing 37 500kHz 74 250MHz Side by Side Half Top and Bottom 1920 x 1080i 16 9 59 940 60 000Hz 33 716 33 750kHz 74 176 74 250MHz Side by Side Half Top and Bottom 50 000Hz 28 125kHz 74 250MHz Side by Side Half Top and Bottom 1920 x 1080p 16 9 24 000Hz 54 000kHz 148 500MHz Frame Packing 27 000kHz 74 250MHz Side by Side Half Top and Bottom 30 000Hz 67 433 67 500kHz 148 352 148 500MHz Frame Packing 33 716 33 750kHz 74 176 74 250MHz Side by Side Half Top and Bottom 50 000Hz 56 250kHz 148 500MHz Side by Side Half Top and Bott
117. pear When the DHCP function of the router connected with this TV is On you can set Auto Setup to On or Off This should usually be set to On When the DHCP function of the router is Off set Auto Setup to Off and set the IP Address DNS address es manually Advanced Network Setup IP Address Setup Auto Setup On IP Address Subnet Mask XXX XXX XXX XXX 255 255 255 Default Gateway Oe 00k DNS Setup Auto Setup On Primary DNS Address 255 255 255 Secondary DNS Address ss SUS LO MAC Address 00 11 22 33 44 55 You can view the fixed MAC address for the TV and for the Dual Band WLAN Adaptor if one is installed Press A or W to select Next Press OK and Network Connection Test will start A message will appear to indicate if the connection was successful or it could not be completed Network connection was completed successfully NOTE The result of Network Connection Test does not always guarantee the connection To cancel the Network Connection Test Press BACK while searching for the Internet connection SETTING UP YOUR TV Press OK If your country supports Network Guide The Guide Type screen will appear Guide Type Please select Guide Type lt Broadcast Guide Press or P to select Broadcast Guide or MediaGuide NOTE If you select MediaGuide it may take time to access the Guide screen depending on active channel numbers Press OK If the Ant Cable Satellite screen appea
118. power cord After 1 Server minute plug the power cord in and turn on the TV 3 Perform the Reset TV function in the System Setup Why are not 3D images displayed menu Ensure that there is no object blocking the infrared signals in the infrared reception part of television and 3D glasses If the infrared data communication between the television and 3D glasses is lost for 5 minutes the power of 3D glasses is turned off Why doesn t the USB HDD work Your country area may not support the USB HDD function isi LED indication What do the LEDs on the front of the television Conaition indicate LED 1 LED 2 Green Orange Power ON Check the table below Programme Timer is set Green Red Power ON Programme Timer Recording or Recording is working Green OFF Power ON Programme Timer is NOT set Red Orange Power OFF Standby Programme Timer is set Red Red Power OFF Standby Program Timer Recording or Recording is working Red OFF Power OFF Standby Programme Timer is NOT set O oT LED1 LED2 83 INFORMATION License Information EODOLBY Manufactured under license from Dolby DBisiratPLus qboratories Dolby and the double D symbol are trademarks of Dolby Laboratories HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC PULSE This product contains Adobe Flash
119. r W to select Network Device Setup and press OK Press A or W to highlight Device Name Setup and press OK Highlight the Device Name field and press OK The Software Keyboard window will appear Input the Device Name by using the software keyboard see page 47 Press the BLUE button NOTE The Device Name can be up to 15 characters long Highlight Done and press OK to save your setting 48 CONTROLS AND FEATURES USB HDD Record Function This function can be used to record and play digital broadcast programmes Read the precautions below before recording or viewing programmes using the USB HDD record function NOTE In order to use this function a USB flash memory or USB HDD needs to be connected to the TV Recorded programmes saved on the USB HDD can only be viewed on this TV They cannot be viewed when connected to another TV including the same model of TV a PC or other device You cannot watch one channel while recording another If the recording time to the USB HDD is too short no data may be saved You cannot record video input signals on the USB HDD Not all types of broadcast may be recordable After programming the TV to record digital broadcasting do not disconnect the power plug before recording starts Also leaving the power switch ON until recording is scheduled to start may cause the recording to fail Should video or audio recording fail due to malfunction of the TV or poor recept
120. r local city office or the shop where you purchased the product Disposal of batteries and or accumulators The crossed out wheeled dust bin symbol indicates that batteries and or accumulators must be collected and disposed of separately from household waste If the battery or accumulator contains more than the specified values of lead Pb mercury Hg and or cadmium Cd defined in the Battery Directive 2006 66 EC then the chemical symbols for lead Pb mercury Hg and or cadmium Cd will appear below the crossed out wheeled dust bin symbol Hg Cd Pb By participating in separate collection of batteries you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health For more detailed information about the collection and recycling programmes available in your country please contact your local city office or the shop where you purchased the product INFORMATION Information Before connecting any external equipment turn off all main power switches If there is no switch remove the mains plug from the wall socket Signal information for Mini D sub 15 pin connector Pin No Signal name Pin No Signal name Pin No Signal name 1 R 6 Ground 11 NC 2 G 7 Ground 12 DDC Data 3 B 8 Ground 13 H sync 4 NC 9 5V 14 V sync 5 Ground 10 Ground 15 DDC Clock NC not connected Acceptable PC s
121. reen up down left or right Press OK to confirm your selection 24 Toreturn to previous Menu 25 Toexit menus and applications 26 When in TV mode When in Text mode Analogue time To reveal concealed displa text Psy To hold a wanted page To enlarge text display size O EX To select a page while viewing a normal picture When using Programme During Playback Guide gt To PLAY kea 24 hours E To STOP pri 24 hours II To PAUSE STEP 44 1 page Kd To SKIP BACK PP 1 page 440 To REWIND PP To FAST FORWARD pei To SKIP FORWARD 27 Colour buttons Text and interactive service control buttons 28 Picture still 29 Torecord DTV programmes Inserting batteries and effective range Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the proper way Suitable battery types for this remote are AA IEC R6 1 5V Do not combine a used old battery with a new one or mix battery types Remove dead batteries immediately to prevent acid from leaking into the battery compartment Dispose of them in accordance with instructions on page 85 of this manual Warning Batteries must not be exposed to excessive heat such as sunshine fire or the like The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television If the operating range becomes reduced the batteries may need replacing CONNE
122. rent picture mode for each input Store mode is only available when Location is set to Store Picture preferences You can customize current picture mode settings as desired For example while selecting Dynamic ifyou change the following items such as Backlight Contrast Brightness Colour Tint Sharpness and the Advanced Picture Settings items your new settings are saved for Dynamic picture mode GD In the Picture menu press A or to select either Backlight Contrast Brightness Colour Tint or Sharpness and press OK B ress dor to adjust the settings Reset This feature resets all picture settings to the factory settings except Picture Mode GD In the Picture menu press A or W to select Reset and press OK 2 A confirmation message will appear Press or P to select Yes and press OK ColourMaster When ColourMaster is set to On it allows the Base Colour Adjustment feature to become available In the Picture menu press A or W to select Advanced Picture Settings and press OK 62 Press W to select ColourMaster Advanced Picture Settings ColourMaster Base Colour Adjustment Colour Temperature Auto Brightness Sensor Off Active Backlight Control Low Black White Level Middle Noise Reduction Active Vision High E Press dorP to select On or Off and press OK 39 CONTROLS AND FEATURES Base Colour Adjustment The Base Colour Adjustment feature allows the adj
123. ress OK Genre Colour EME Movies CY XY Colour Setup With the focus on a particular genre press the desired coloured button to assign Four colours will be available to set Press BACK to go back to the Guide screen Using MediaGuide MediaGuide is a service of Rovi Corporation This service is an integrative media guide through the Internet besides television contents and internet contents NOTE You need to configure a home network before using this feature see page 14 Make sure you selected MediaGuide in the Guide Type menu of Initial Setup see page 19 This setup can also be done from the Setup System Setup Quick Setup menu any time MediaGuide screen oO Press GUIDE on the remote control or select Guide in the TV Programmes menu and press OK The Listings menu in the Secondary Navigation will be selected Default focus position is the current channel Remote control key operation V e op tA 69 This will tune to live TV for the particular show If the show is not being aired you will be directed to the Overview screen with upcoming show times Primary Navigation menu In the Secondary Navigation menu press to expand the Primary Navigation menu Hotlist Press A or W to select Hotlist and press OK Shows will be listed Selecting a movie or show will bring you to the overview page Primary Navigation Romo Search Press A or W to select Search and press OK Terms
124. ressing at the top left thumbnail the screen will move to the previous page Conversely when pressing P at the bottom right thumbnail the screen will move to the next page PA or amp A PY or X Y buttons can be used to page up down the Multi View when there are more photos than will fit onto one screen When the PA or K A Pv or X Y buttons are pressed the highlight shall be on the photo at the top left of Previous Next Multi View NOTE The page down function on the last page and page up function on the first page are not available 2 When you select a folder press OK to move to the next layer Press BACK to move back to the previous layer 3 Press OK to view the selected photo in Single View mode 59 CONTROLS AND FEATURES Single View In this mode only files located in the selected directory will be displayed This view allows you to change the photo content manually When moving from Multi View to Single View the currently selected photo will be displayed Press P to view the next photo Press to view the previous photo Press A to rotate the image 90 clockwise Press W to rotate the image 90 counterclockwise Press to display file status information file number photo title resolution etc NOTE The information may not be correctly displayed depending on the contents or DMS You can not rotate in 3D 2D to 3D mode Slide Show This view allows you to watch a slide show
125. rmation sent from the Wi Fi router Security key to be set manually Manual setup Network name Authentication Encryption and Security Key all to be inputted manually Press A or W to select Network Setup and press OK 43 Assisted Setup In the Preferences menu press A or W to select Network Setup and press OK Press A or W to select Network Type and press or P to select Wireless Press A or W to select Wireless Setup and press OK 00 O Press A or W to select Assisted Setup and press OK Wireless Setup Assisted Setup Manual Setup Press A or W to select the desired AP and press OK NOTE Check the MAC address on the label of the AP or in the manual and select your AP Highlight Security Key and press OK The Software Keyboard window will appear Input the Security Key by using the Software Keyboard see page 47 To save your setting press the BLUE button NOTE The Security Key must adhere to these conditions TKIP AES 8 63 ASCII or 64 Hex characters WEP 5 or 13 ASCII or 10 or 26 Hex characters There is only one key ID to set for WEP encryption Highlight Done and press OK NOTE If Network Name is not displayed see step 4 and 5 in Manual Setup below to set Network Name before pressing Done NOTE Settings are not saved if BACK is pressed before Done is selected Manual Setup In the Preferences menu press A or W to select Network Setup and press OK Press A or W to
126. rs press A or W to select Antenna Cable or Satellite and then press OK to check Ant Cable Satellite ff Antenna REG i Satellite Next If DVB C is not supported in your area Cable will not be displayed When you select Antenna or Cable follow steps 16 to 19 When you select Satellite skip to step 20 When you select Antenna or Cable and Satellite the Satellite Settings startup screen will appear automatically after completing the Antenna or Cable scan and pressing OK Select Next and press OK The Auto Tuning start up screen will appear with the option to select between DTV and ATV DTV or ATV if available Use lor P to select the appropriate mode 8B 19 Press A or W to highlight Start Scan and then press OK The television will start to search for available DTV and or ATV channels The progress bar will indicate the scan status You must allow the television to complete the search Auto Tuning Antenna Progress DTV Tune 3 m ATV Tune Waiting Channel C7 When the search is complete the television will automatically select channel one The Auto Tuning screen will display the total number of services found Press or to view the DTV digital channel or ATV analogue channel lists Use A or W to move through the list to select a channel and then press OK to view In ATV mode some areas may receive duplicate stations There may not be a clear picture or
127. ry Audio Language English NOTE The following display menus will differ slightly according to the country you selected Ifthere is nota country that you want to select in the list select Others Press OK and the Location screen will appear Location To use the TV for displaying in a store showroom please select Store Home mode is recommended for normal use lt Home Press or to select Home or Store For normal home use select Home Press OK and the AutoView screen will appear press or to select Yes or No AutoView AutoView mode automatically adjusts picture settings to suit ambient light conditions Do you wish to enable AutoView mode No Press OK and the Network Setup screen will appear Press or P to select Yes or No Network Setup Do you want to configure network setup lt Yes When you select No skip to step 15 17 Press OK and the Network Type screen will appear Press or P to select Wired or Wireless Network Type Please select a network type lt Wired When you select Wired LAN cable connection skip to step 12 When you select Wireless USB WLAN adaptor connection follow step 9 NOTE If the USB WLAN adaptor is not connected Network Type screen does not display and skip to step 12 Press OK and the Wireless Setup screen will appear Press or P to select the Wireless Setup type Assisted Setup follow step 10 Inpu
128. screen will display the services found For Satellite Tuning Press or P to select Yes and press OK Auto Tuning Satellite Start Scan Satellite ASTRA 19 2 E Search Option Free to Air Press A or W to highlight Satellite and press or gt to select the desired satellite No 1 Sat No 4 Sat or All You can select Free to Air or All as the Search Option Highlight Start Scan and press OK to continue with the Auto Tuning When the search is complete the Auto Tuning screen will display the services found Press A or W to move through the list to select a channel and press OK to view SETTING UP YOUR TV ATV Manual Tuning inthe System Setup menu press W to select ATV Manual Tuning and press OK Tuni ng System Setup N 5 Menu Language English The television can be tuned in manually using ATV Manual Tuning For example you might use the feature if the television cannot be connected to a media recorder decoder with a SCART lead or when you want to tune in a station on another System Satellite Settings Auto Tuning ATV Manual Tuning DTV Manual Tuning DTV Settings Country Germany Ant Cable Satellite Use and gt to move across the screen and select any of the ATV Manual Tuning options Then use A or W to adjust the settings ATV Manual Tuning System o Use A or W to select the desired position We suggest A Ce Pos 0 for a media recorder ATV Manual Tuning Pos Channel Station 123
129. screen will be updated 4 Repeat as necessary Press EXIT to finish SETTING UP YOUR TV Manual Tuning for DVB C When Ant Cable Satellite is set to Cable DTV Manual Tuning items are as follows Frequency Input a specific frequency to be scanned Modulation Choose from one of five QAM modulation options Symbol Rate Input a specific baud rate KS s to be used for the manual scan Highlight Start Scan and press OK Manual Tuning for DVB S When Ant Cable Satellite is set to Satellite DTV Manual Tuning items are as follows DTV Manual Tuning Satellite WEAK AVERAGE STRONG NE Signal Strength Quality POOR Satellite ASTRA 28 2 E Transponder 1183 Frequency 10714 MHz Symbol Rate 22000 KS s Polarisation H Search Option Free to Air Start Scan Use A or W to highlight an item Satellite Transponder Frequency Symbol Rate Polarisation or Search Option and press or P to select the required option Highlight Start Scan and press OK 27 DTV Settings Channels Antenna Cable The channel order may be changed to suit your personal preference Select DTV Settings from the System Setup menu and press OK Select Channels and press OK DTV Settings Channels Subtitle and Audio Parental PIN Setup Parental Control Local Time Setting Standby Channel Update Common Interface 3 For your convenience you can jump to specific places in the list by one of two methods Channels An
130. sion is switched on it will take a few minutes for the REGZA LINK icon to appear in the list When an HDMI cable is removed it will take a few minutes for the icon to disappear If the HDMI cable from connected equipment is changed Enable REGZA LINK in the REGZA LINK Setup menu may need to be reset to On If you change the HDMI lead to a connected device or change an HDMI device setting reset the Enable REGZA LINK item on the REGZA LINK Setup menu from Off to On REGZA LINK one touch play When connected equipment is switched on REGZA LINK will automatically detect the television through the input selection If the television is in standby it will be switched on automatically These functions can be enabled or disabled from the REGZA LINK Setup see page 77 NOTE Even if the equipment is showing a menu the television may automatically show the input source This feature depends on the connected equipment and television state REGZA LINK system standby If the television is turned off standby mode the television will send a message to turn off standby mode all of the REGZA LINK devices connected to the television These functions can be enabled or disabled from the REGZA LINK Setup see page 77 NOTE This feature depends on the connected equipment and television state 78 TEXT SERVICES Text services This television has a multi page text memory which takes a few moments to load It offers tw
131. splayed or the display mode switches between 2D and 3D To switch to 3D mode Set Preferences 3D Setup 3D Auto Start to 3D Press 3D while viewing 2D mode or Native mode Trigger of Switching Display Mode Press 3D button Input Signal Type Additional Format Source Select Select Information Signal 3D 2D to 3D 3D With 3D 3D Format Auto Detect FP En Eo Signal Information sBs TB Without 3D sBs i BD ADD Auto Detect E a8 Information TB Bie 2D Format Signal oa D I 3 Correct 3D image English CONTROLS AND FEATURES To select 3D format from the Quick menu in 3D To select 2D format from the Quick menu in 2D mode mode Press QUICK to display the Quick Menu Press QUICK to display the Quick Menu Press A or W to select 3D Settings and press OK Press A or W to select 3D Settings and press OK Press A or W to select 3D Format Select and press OK Press A or W to select 2D Format Select and press OK Press or P to select 3D SBS or 3D TB Press or to select Native Side by Side SBS or Top and Bottom TB Trigger of Switching Ouickm nu Display Mode Trigger of Switching Ouick menii Input Signal 3D Fomat Select Display Mode Type Additional Format Source SBS TB Input Signal 2D Fomat Select Info Signal Type Addi
132. ss Sensor Press lt or P to select On or Off Active Backlight Control When the Active Backlight Control feature is activated it will control the backlighting levels depending on various scenes such as picture motion bright scene or dark scene oO In the Advanced Picture Settings menu press A or Y to select Active Backlight Control B Press dorP to select High Low or Off High To control the backlighting levels depending on various scenes such as motion picture bright scene or dark scene Low To control the backlighting levels for dark scene Black White Level Black White Level increases the strength of dark areas of the picture to improve the definition oO In the Advanced Picture Settings menu press A or Y to select Black White Level 2 Press or to select High Middle Low or Off MPEG NR Noise Reduction When watching a DVD the compression may cause some words or picture elements to become distorted or pixelated Using the MPEG NR feature reduces this effect by smoothing out the edges oO In the Advanced Picture Settings menu press A or Y to select Noise Reduction and press OK 62 Press W to select MPEG NR Noise Reduction MPEG NR DNR Press orP to select High Middle Low or Off to suit your preference CONTROLS AND FEATURES DNR Digital Noise Reduction DNR allows you to soften the screen representation of a weak signal to reduce the noise effect oO Select DNR fr
133. stal stand away from the TV Screw Wall bracket Spacer supplied 1 T back panel M6 32TL 32UL 32ML M8 40TL 40UL 40ML and 46TL 46UL 46ML 5 Always use the screws supplied or recommended by the wall mount manufacturer 28 32mm CAUTION The diameter and length of the screws differ depending on wall bracket model Use of screws other than the screws specified may result in internal damage to the TV set or cause it to fall etc 5 Place four spacers supplied INSTALLING YOUR TV When using the 3D glasses Available 3D glasses Toshiba FPT AGO2G UL975 TL963RB ML963RB series Supplied TL963 TL966 series Not supplied The 3D function has been designed for private use and entertainment in your home environment Please note that any commercial use of the 3D function could lead to copyright infringement of authors rights Toshiba asks you to respect the intellectual property rights of third parties About handling the 3D glasses Do not leave the 3D glasses or the accessories within the reach of small children Inhaling or swallowing them may cause suffocation or lesions in the stomach wall If swallowed consult a doctor immediately Do not repair modify or disassemble the 3D glasses by yourself Doing so may cause a fire or cause you to become indisposed while viewing 3D images Contact the Toshiba Call Center for repair of your 3D glasses Do not expose the glasses to e
134. t PC Settings from the Display Settings menu highlight Sampling Clock and adjust until the lines clear Why are there horizontal stripes and or blurred images on the screen when in PC mode The Clock Phase may need adjustment Select PC Settings from the Display Settings menu highlight Clock Phase and adjust until the picture clears Why when digital subtitles have been selected are they not showing on screen Subtitles are not currently being transmitted by the broadcaster Why are there problems with analogue text Good performance of text depends on a good strong broadcast signal This normally requires a roof or loft aerial If the text is unreadable or garbled check the aerial Go to the main index page of the text service and look for the User Guide This will explain the basic operation of text in some detail If further information is needed on how to use text see the text section 82 HFS FO 5e oro gt O FO 6 Why is a page number visible at the top of the screen but no text Text has been selected but Teletext information is currently unavailable on the current source Why are the colours wrong when an NTSC source is played Connect the source via a SCART lead and play Select Colour System from the Setup menu Set the Colour to Auto and exit Go to the Picture menu and adjust the tint Why don t the devices connected via HDMI operate properly Make sure to use cables with the HDMI logo see pa
135. t and press OK USB HDD operation test will start Wait until the test ends NOTE The results of the device test are only a guide The device may not function as shown in the results CONTROLS AND FEATURES To format a USB HDD In the Recording Setup screen press A or W to select Format Device and press OK Press 4orP to select Yes in the confirmation window that will appear and press OK Formatting will start Wait until formatting ends NOTE If the USB HDD is separated several partitions by PC and multiple Partition appear on the Device List screen press Aor F to select the Partition you want to format When the USB HDD or Partition is formatted all the data stored on the USB HDD or Partition will be deleted 55 Scheduling priority If scheduled time slots are next to each other and there is more than one minute between the end time of the first schedule and the start time of the next schedule programmed recording will be performed correctly When Start Padding Time and End Padding Time are set see page 54 the start time and end time will be the time plus the additional minutes If scheduling times overlap priority will be given to the programmed recording which starts first When the programmed recording that started first ends recording will switch to the next scheduled programme At this time depending on how far the scheduling times overlap the beginning section of the next scheduled pro
136. t the Security Key only Manual Setup skip to step 11 Input the all settings Wireless Setup Please select a kind of wireless network lt Assisted Setup NOTE EXIT is available during settings In step 9 when you select Assisted Setup Press OK and the Assisted Setup screen will appear Press A or W to select the desired AP and press OK NOTE Check the MAC address on the label of the AP or in the manual and select your AP Press A or W to select Security Key and press OK The Software Keyboard window will appear page 47 Input the Security Key by using the Software Keyboard To save your setting press the BLUE button NOTE The Security Key must adhere to these conditions TKIP AES 8 63 ASCII or 64 Hex characters WEP 5 or 13 ASCII or 10 or 26 Hex characters There is only one key ID to set for WEP encryption Press A or W to highlight Done and press OK NOTE If Network Name is not displayed see Manual Setup below to set Network Name before pressing Done If BACK is pressed before Done is selected settings are not saved When the message Wireless configuration is complete appears on screen press OK The screen will skip to step 12 SETTING UP YOUR TV In step 9 when you select Manual Setup Press OK and the Manual Setup screen will appear Press A or W to select Network Name and press OK The Software Keyboard window will appear page 47 Input the N
137. t your desired option Auto Tuning Tuning Mode DTV and ATV Start Scan DTV Operator Selection Quick Scan Auto Auto Auto Auto Auto Scan Type Start Frequency End Frequency Modulation Symbol Rate Network ID With the exception of DTV Scan Type and DTV Modulation items all of the following items will have 2 operating modes The first is Auto where the values for each item are preset by the system The second is an Input mode where you will be able to enter a single value in place of the pre set value If no channel is currently tuned and the Input state is chosen a system default value will be shown However if a channel is currently tuned when the item is accessed the value of the current channel will be displayed Operator Selection You can choose the Cable operator depending on the Country you set DTV Scan Type This item determines whether a Quick Scan or a Full Scan will be executed The Quick Scan is a simplified version of the Full Scan that is designed to complete in less time DTV Start Frequency This sets the frequency from which the scan will begin DTV End Frequency This sets the frequency at which the scan will end DTV Modulation You can choose from five QAM modulation settings DTV Symbol Rate This is the baud rate KS s of the scan DTV Network ID This is the Network ID to be utilized for the scan This item is grayed out when DTV Scan Type is set to Full Scan
138. ted oO In the Preferences menu press A or W to select AV Connection and press OK Press A or W to select Digital Audio Output AV Connection Input Labeling Digital Audio Output 3 Press OK to display Digital Audio Output menu and press A or W to select an option Audio Format Press or to select PCM or Auto PCM This mode outputs PCM format to the digital audio output socket Auto This mode outputs Dolby Digital if available or PCM to the digital audio output socket Dolby Digital Dolby Digital Dolby Digital Plus Dolby Digital MPEG PCM HE AAC Dolby Digital Audio Delay Press or to select Auto or Manual Auto This mode automatically adjusts the audio timing to meet the video timing NOTE The time lag might be large between the image and sound depending on the connected equipment amplifier etc In that case select Manual Manual You can manually adjust the audio signal timing to meet the video signal timing Delay Adjustment Press or to adjust the audio signal timing 0 250ms to meet the video signal timing NOTE This feature is grayed out when Audio Delay is in Auto Atime lag will occur when the video signal or audio signal is changed Adjust the timing accordingly When adjusting the timing turn down the volume of the AV equipment used as far as possible Depending on the equipment noise etc may occur when the signal is changed Depending on the connected equipm
139. tenna TV Line No 10 Pos Name ABC TWO ABC THREE CABC Channel ABC NEWS 24 ABCi AA AC CRC Line Number Jump Use the number buttons 0 9 to input the line number you want to select and press OK It is also possible to change the Position number of a particular channel Renumber Press the RED button to renumber the highlighted channel Edit the channel number using the number buttons and press OK If the position number you input already exists a confirmation window will appear SETTING UP YOUR TV Move Press the GREEN button to activate the Move feature Press the A or W buttons to select the channel you wish to move and press OK to check If you wish to move multiple channels at once select another channel and check in the same way Repeat as necessary Once all desired channels have been checked press the A or W buttons to place the focus at the position to which you wish to move the channels The channels will be inserted above the highlighted channel Press the GREEN button to execute the move Antenna TV Channels Line No 40 Pos Name ABC TWO 7 ABC THREE I 30 CABC Channel EU ABC NEWS 24 51 ABCi ms22 AA 823 AC CT Position No Sort Press the YELLOW button A confirmation window will appear Press or P to select Yes and press OK Your existing channel order will be lost Do you wish to continue Channels Satellite oO Select DTV Settings from the Syst
140. terfere with other devices or products Notes on watching the TV 3D effect and image quality may vary depending upon content quality and display device capability functionality settings If you use any device such as a mobile phone or mobile wireless device near the 3D glasses the 3D glasses may not work correctly Use the product in the following temperature range otherwise the quality of the 3D image or the reliability of the product cannot be guaranteed 3D glasses 0 C 40 C 32 F 104 F TV 0 C 35 C 32 F 95 F If you use a fluorescent light it may flicker depending on the frequency of the light In this case reduce the brightness of the fluorescent light or use another light It is not recommended to watch the TV in a dark room especially for children Wear the 3D glasses properly otherwise you may not see the correct 3D image When not viewing 3D images on this unit take off the 3D glasses otherwise it may be difficult to see the display on other products such as PC digital clock or calculator etc About the connecting cable Use a high speed and high quality HDMI cable when you connect a device such as 3D compatible BD player or PC to the TV When you use a standard HDMI cable 3D images may not be shown INSTALLING YOUR TV Please take note The digital reception function of this television is only effective in the countries listed in the Country sectio
141. the Multi View screen if you select a movie whose stopped position has been memorized the message Resume Play will appear Select Yes to resume playback from the last stopped position NOTE If you play different content or exit Media Player the memorized stopped position will be deleted To select a movie from Play List While playing a movie you can select a different movie from the Play List Press QUICK to open the Quick Menu Press A or W to select Play List and press OK The Movie List will appear To close the Movie Viewer File Compatibility Press A or W to select a file name Press EXIT See page 88 CONTROLS AND FEATURES To register your TV to a DivX account This TV allows you to play back files purchased or rented from DivX Video On Demand VOD services When you purchase or rent DivX VOD files on the internet you will be asked to enter a registration code In the Media Player Setup menu press A or W to display DivX VOD and press OK 2 Press A or W to highlight DivX VOD Registration and press OK Divx VOD DivX VOD Registration DivX VOD Deregistration The DivX VOD window will appear and you will see the registration code For details on registration please visit the DivX website at http vod divx com O Copy the activation file to a memory device and play it on the TV To deregistration your device In step 2 above highlight DivX VOD Deregistra
142. tics may weaken and crack over time from the combination effects of chemical agents and mechanical stress such as weight of TV Failure to follow these instructions could result in serious injury and or permanent damage to TV and TV pedestal When using a Wall Bracket Please use a wall bracket appropriate for the size and weight Removing the Pedestal Stand of the LCD TV Two people are required for installation To install a wall mount from another manufacturer use the 1 Carefully lay the front of the unit face down ona flat cushioned surface such as a quilt or blanket Leave the SPACERS supplied stand protruding over the edge of the surface 1 Unplug and remove any cables and or other component NOTE Extreme care should always be used when connectors from the rear of the TV removing the pedestal stand to avoid damage to the LCD 2 Carefully lay the front of the unit face down on a flat panel cushioned surface such as a quilt or blanket gt Remove the fourscrews 3 Follow the instructions provided with your wall bracket Before proceeding make sure the appropriate bracket s are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket 4 Make sure to place the spacers supplied between the bracket and the back of the TV Four screws 3 Once you have removed all four screws holding the pedestal stand in place remove the pedestal stand from the TV by sliding the pede
143. tion and then press OK 2 A confirmation message will appear Select Yes and press OK The DivX VOD window will appear and you will see the deregistration code For details on registration please visit the DivX website at http vod divx com ABOUT DIVX VIDEO DivX is a digital video format created by DivX LLC a subsidiary of Rovi Corporation This is an official DivX Certified device that plays DivX video Visit divx com for more information and software tools to convert your files into DivX videos ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration DivX Certified to play DivX video up to HD 1080p including premium content 63 To playback DivX Plus HD content To play in fast reverse or fast forward directions press 44 or PP during playback Each time you press the or gt P the playback speed will change This TV generates original chapter point in 10 increments for 10 chapters in total that are accessible by using the Number buttons on the remote control During playback press PPI to skip to the beginning of the next chapter When PPI is pressed twice in succession it will repeat two times of above If BPI is pressed at the last chapter pl
144. tional Format Source SBS TB Native 3D With 3D 3D Info Signal Format Auto Detect FP i k 3D With 3D FP Signal Information Format AutoDetect SBS Signal Information SBS D Without 3D sas E Ha e E EA Auto Detect SS fee Without 3D SBS c HEA Information TB isi Bie Auto Detect onion SD 2D Format Signal DI 3 Information TB Ss an Correct 3D image 2D Format Signal E E m To switch to 2D mode Correct 2D image Set Preferences 3D Setup 3D Auto Start to 2D NOTE Take off the 3D Glasses in 2D mode Press 3D while viewing 3D mode or Native mode To switch to Native mode Press 3D while viewing 3D mode Trigger of Switching Display Mode Press 3D while viewing 2D to 3D mode Input Signal ee NOTE When 3D format signal with 3D Auto Detect Type Additional Format Source Information is received it is not possible to switch to Native D me Signal From the Quick Menu in 2D mode Format Daea e FP i 1 In the Quick Menu press A or W to select 3D Signal Information Settings and press OK SBS TB pE Without 3D ee e mm Ea 2 Press A or W to select 2D Format Select and press OK S ele iS S S Press or to select Native Information TB Ea 2D Format Signal NOTE When Frame Packing is input 2D Format Select will be grayed out Correct 2D image To switch to 2D to 3D mode Press 3D while viewing 2D or Nat
145. title XY For Hard of Hearing PANY UIT School ELa 0Schoo 6 The Daily Politics H Working lun H Scho IS info EVT E This is AAA THREE H This is AAA THREE Recording info REC Recording Service 4 ARANEWS 24 AAA News _ MAAA News BAAN A 5 AAAI i HAAA info 3D info 3D FIEEETO 3D2D 8 CCCHD Event info HD SD Video format HD SD 9 DDDHD 16 9 4 3 Video Aspect Teletext You can switch the time scale to 1 5 or 3 hours by ing the GREEN button E Subtitle Single Multi ee seen qd Faas ae 2 Press or for information on other programmes scheduled for the channel selected To highlight the 0 4 18 Parental rating i j first programme in the genre grid press the RED Encrypted button Timer info 4 Recording v Reminder 3 For details of other programmes currently available press A and W to scroll up and down the channel list As channels are selected details of the programme currently being broadcast will appear Press or to view information for future programmes For information on a highlighted programme press To set the timer for that programme press the BLUE button to bring up the Programme Timers menu Press Pw to advance to the next page or press PA to go back to the previous page CONTROLS AND FEATURES Genre selection searching From the Guide screen you can use the genre selection and search features In the Guide screen press QUICK Press A or W to highlight Genre Colour in the Quick Menu and p
146. to select Enable On Timer and press 4 or P to select On On Timer Enable On Timer Enable DTV Clock Power On Time Repeat Input Channel Volume Press W to select Enable DTV Clock and then press 4 or P to select On or Off Press A or W to go through the list adding the details of the On Timer by using the number buttons and lt and P to make selections Power On Time only for DTV Clock On mode Set the time you prefer with the number buttons Repeat only for DTV Clock On mode Select the desired On Timer operation Once Every Day Mon Fri Mon Sat Sat Sun Input Select a video input source ATV DTV Ant EXT 1 EXT 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 or PC Channel Set the channel that will be tuned when the television turns on NOTE When an external input is selected in the Input field a channel cannot be selected Volume Set the volume that will be applied when the television turns on Time until Power On only for DTV Clock Off mode Set the amount of time from now until the TV turns on using the number buttons maximum of 12 hours Press A or W to highlight Done and press OK 66 To cancel the On Timer In the On Timer menu select Enable On Timer Press or P to select Off Press A or W to highlight Done and press OK Sleep Timer The television can be set to turn itself Off after a certain length of time Press MENU 4 to highlight Function icon Press A 4P to highlight Sleep Ti
147. to select MAC Address and press OK Network Connection Test This function checks the Internet connectivity In the Preferences menu press A or W to select Network Setup and press OK Press A or W to select Network Connection Test and press OK A message will appear to indicate if the connection was successful or if it could not be completed NOTE The result of Network Connection Test does not always guarantee the connection To cancel the Network Connection Test 46 Press BACK while searching for the Internet connection CONTROLS AND FEATURES Using the software keyboard You can enter text by using the Software Keyboard The Software Keyboard window will appear when you press OK on a field that accepts character input To enter text using the software keyboard Press OK Highlight the desired character on the on screen software keyboard Repeat steps 1 and 2 until you have entered all desired text Press the BLUE button to close the software keyboard and return to the previous screen NOTE If BACK is pressed changes are not saved and the software keyboard window is closed The text will remain as it was before starting the keyboard Input operation on the remote control Network Device Setup External Control Setup This setup allows you to operate a home network connected your TV from an external device Media Controller Setup Button Descript
148. ttings and press OK Press A or W to select Bass or Treble Press or P to change the setting Voice Enhancement Voice Enhancement emphasises the frequency range of the speaker s voice making it easier to catch what they are saying In the Advanced Sound Settings menu press A or Y to select Voice Enhancement Press or P to select On or Off Dynamic Bass Boost Dynamic Bass Boost enhances the depth of the sound on the TV speakers The difference will only be noticeable on sound with strong bass In the Advanced Sound Settings menu press A or Y to select Dynamic Bass Boost 2 Press orP to select the desired bass expansion level Low High or Off Stable Sound Stable Sound reduces the volume level differences between channels It automatically remains on the same volume level when you change channels oO In the Sound menu press A or W to select Stable Sound B Press lt or P to select On or Off Dynamic Range Control This feature allows control of audio compression for some digital TV programmes MPEG 1 and MPEG 2 audio programmes are not supported D In the Sound menu press A or W to select Dynamic Range Control B Press lt or P to select On or Off CONTROLS AND FEATURES Audio Level Offset Sometimes there can be large changes in volume when switching from a DTV 5 1ch to a DTV 2ch an ATV channel or an external input Using the Audio Level Offset feature reduces these volum
149. u will not be able to access content that requires the upgrade 84 DLNA DLNA CERTIFIED DLNA CERTIFIED Logo are trademarks service marks or certification marks of the Digital Living Network Alliance Rovi and Rovi Guide are trademarks of Rovi ri OVI Corporation and or its subsidiaries guide The Rovi Guide system is manufactured under license from Rovi Corporation and or its subsidiaries DVB is a registered trademark of the DVB Project THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO i ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD AVC VIDEO AND OR ii DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA L L C SEE HTTP WWW MPEGLA COM THIS PRODUCT IS LICENSED UNDER THE MPEG 4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER FOR i ENCODING VIDEO IN COMPLIANCE WITH THE MPEG 4 VISUAL STANDARD MPEG 4 VIDEO AND OR ii DECODING MPEG 4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON COMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG 4 VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDIT
150. ustment of individual colours to suit personal preference This can be useful when using an external source oO In the Advanced Picture Settings menu press A or to select Base Colour Adjustment and press OK 2 Press A or W to select an option and press P to move to the adjustment window Base Colour Adjustment jue Saturation Brightness L Red 0 0 Green C Blue EGOI i Magenta Cyan Reset 3 Press or to select Hue Saturation or Brightness and press A or W to adjust the settings as required Saturation Brightness O Press BACK to return to the previous menu To return to the factory settings select Reset and press OK Colour Temperature Colour Temperature increases the warmth or coolness of the picture by increasing the red or blue tint oO In the Advanced Picture Settings menu press A or Y to select Colour Temperature and press OK 2 Press A or W to select Colour Temperature and press or to select Cool Natural or Warm to suit your preference Press Aor W to select Red Level Green Level or Blue Level and press or P to adjust the level NOTE To return the adjustments to the factory defaults select Reset and press OK 40 Auto Brightness Sensor When the Auto Brightness Sensor is activated it will automatically optimise the backlighting levels to suit ambient light conditions oO In the Advanced Picture Settings menu press A or to select Auto Brightne
151. void use of the 3D function when under the influence of alcohol If you are ill or feel ill you should refrain from viewing 3D images and consult your health care provider as may be appropriate If you experience any of the following symptoms when viewing 3D video images stop viewing and contact your health care provider Convulsions eye or muscle twitching loss of awareness altered vision involuntary movements disorientation eye strain nausea vomiting dizziness headaches If you feel eye fatigue or other discomfort from viewing 3D video images remove the 3D glasses and discontinue use until the condition is eliminated Viewing in 3D may cause dizziness and or disorientation for some viewers Therefore to avoid injury do not place your TV near open stairwells balconies or wires Also do not sit near objects that could be broken if accidentally hit When viewing 3D images always wear 3D glasses Watching 3D images without 3D glasses may cause eye strain Use specified 3D glasses When watching 3D images do not wear 3D glasses at an angle and do not lie down If you watch while lying down or with the glasses tilted the 3D effect is lost and it may cause eye strain It is recommended that the viewer s eyes and 3D glasses are level with the screen If you have prescription eye glasses or contact lenses wear the 3D glasses over them Watching 3D images without appropriate eyewear may cause eye strain I
152. xcessive heat such as sunshine fire or the like About the 3D glasses Do not use the 3D glasses if they are not working properly or broken Continuing to use them in sucha state may cause injury eye strain or indisposition Do not use the 3D glasses if they are broken or have any cracks Do not stand or walk while wearing 3D glasses You may lose your balance which could result in falls or other accidents Do not wear the 3D glasses for any purpose other than viewing 3D programming 3D glasses do not function as sunglasses Do not drop exert pressure on or step on the 3D glasses Doing so may damage the glass section which may result in injury Exposing the 3D glasses to liquid or excessive heat may damage the liquid crystal shutter function If your nose or temple turns red or you feel pain or discomfort stop using the 3D glasses Such symptoms as above may occur if you keep wearing them for a long time which may also cause indisposition Be careful not to pinch your fingers in the hinge of the 3D glasses Cautions on watching 3D images Some viewers may experience a seizure or blackout when exposed to certain flashing images or lights contained in certain 3D television pictures or video games Anyone who has had a seizure loss of awareness or other symptoms linked to an epileptic condition or has a family history of epilepsy should contact a health care provider before using the 3D function A

Toshiba TL966/32 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents