Home

Toshiba L3448/32 User's Manual

1. 9 Zoom This option zooms to the 14 9 picture Use this setting to view a true 4 3 broadcast This zooms up the wide picture Cinema 16 9 aspect ratio to the full screen English 28 Configuring PC Picture Settings PC Picture Settings While in VGA PC mode some items in Picture menu will be unavailable Instead VGA mode settings will be added to the Picture Settings while in VGA PC mode PC Picture controls Contrast Brightness and Colour adjustments in this menu are identical to adjustments defined in TV picture menu Select Reset and press OK button to reset the adjustments Note For switching to VGA PC source press SOURCE button on your remote control and select VGA PC input Note that VGA PC mode menu settings are available only while the TV is in PC source PC Position Select this to display PC position menu items PC Position Autoposition Ok H Position 1 0 V Position ll 0 Dot Clock i 0 Phase i 0 Autoposition If you shift the picture horizontally or vertically to an unwanted position use this item to put the picture into correct place automatically Highlight Autoposition and then press the OK button H Position H Horizontal Position shifts the image horizontally to right hand side or left hand side of the screen Press Down button until H Position is highlighted Press Left or Right button to adjust the value V Position V Vertical Position s
2. ccccccssccccssseeeesseeeeees 21 Controlling Volume and Muting Sound 21 Selecting Programme Positions cccc 21 Standby Notiflcahons yu sesnsmismss mnissmsss enn 21 Channel List Sorting Programmes Programme Male E EE A T TT T 22 Viewing Channel List cccccssssseeeeseeseseeees 22 Moving a Channnel ccccccssssseeeeeseeesseeeeeeees 22 Deleting a Channel rrannnnnnnnnnrnnnnnvrnnrrnnnnnnnne 22 Renaming a Channel s rrnnrnnnrnnnnnvrnnrrnnnnnnnne 22 Locking a Channeluuamnsnsrusmestunsssiaanses 22 Viewing Info Banner Electronic Programme ET 0 EE 23 Viewing Info Banner rrrrrnnnnnnvrnnrrnnnnnvrnnnrnnerr 23 Electronic Programme Guide rrnnrrnnrnnnnnnrre 23 Language Selection cccccccsssssseeeeessenesseeeees 24 Language SettingS ccccccssssssseeessensseeeeeeees 24 Digital Settings Parental Control Menu Lock Set PIN E E AE PE TESE E OTE T 25 Viewing Parental Control Menu 00008 25 Menu LOCK EE 25 Maturity LOCK EE 25 Ga Es e EEE 25 EP 25 Configuring Picture Settings rrrrrrrrnrrnnnnrnvnnn 26 Configuring Picture Settings rrrrrrrnnrrrnvrnnnnn 26 Operating Picture Settings Menu ltems 26 ae EE E E E TE 26 GS I EE EEE 26 EGP CSS RE NR 26 SLET OLA EEE ee 26 OOM oe ate bate EE ENE 26 Power Save Mode cccccsssssseeeeeeeeesseeeeeees 26 BAG OME RE EE ER 26 Noise Reduction
3. e Some applications may require an always on broadband internet connection firmware update and or additional bandwidth dedicated to this product e Third party internet services may change be discontinued or restricted at any time e Use of third party internet services may require registration by a computer and if needed payment of charges and membership e Service content and the interface may be changed at any time without prior notice Toshiba makes no warranties about the content availability or functionality of third party content or services Using the Internet Browser To use the internet browser enter the portal first Then launch the Internet application on the portal Predefined web sites and logos will be displayed on the browser s opening page to provide quick access The user can add desired websites to the quick access page To add a new quick access item point the cursor to ET whilst on the website and press OK A submenu will be opened Then point the cursor to Ea and press OK On the next window point the cursor to one of the quick access items and press OK to replace it with the new one To visit a web site move the cursor to the adress bar using the navigation buttons on the remote and press OK The virtual keyboard will be opened in a new window Enter the URL in the adress bar Point the cursor to ey button and press OK To make a search on internet enter a keyword in the adress bar Poin
4. rrrranrrnnvrvrrrnnrrnvrnnrrnnsnner 46 Revealing Concealed Text cccscsssssseeeeees 46 Holdinga Strict EE 46 To display an initial page rrrrrrrnnrrvrrrnnrrnnnnnrr 46 Appendix A PC Input Typical Display Modes 47 Appendix B AV and HDMI Signal Compatibility Input Signal Types eesnrrrrnnnnnnrnnnnnnnvnnnnnnnnnnn 48 Appendix C PIN Information srrrrrnnnrrenrnnnnrr 49 Appendix D Supported File Formats for USB MOE Eaa E ast ausneddacsosseacetawaswenncssnssieats 50 Specifications and Accessories ccseeeeeeeeees 51 License Information ssicsccsccnsccssascscedsceresendesdQeeszacsees 52 Q amp A OCHO MT erasperiuntieneseeenteatentonnctemsnntotalteasiaaectanienns 53 English 3 Safety Precautions Air Circulation Leave more than 10cm around all edges when wall mounting the television to allow adequate ventilation This will prevent overheating and possible damage to the television Dusty places should also be avoided Heat Damage Damage may occur if the television is left in direct sunlight or near a heater Avoid places subject to extremely high temperatures or humidity or locations where the temperature is likely to fall below 5 C 41 F Mains Supply The set should be operated only from a 220 240 V AC 50 Hz outlet DO ensure that the television is not standing on the mains lead DO NOT cut off the mains plug from this equip ment this incorporates a special
5. Failure to follow these instructions could result in serious injury and or permanent damage to TV and TV pedestal Cleaning the screen and cabinet Turn off the power and clean the screen and cabinet with a soft dry cloth We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage Please take note The digital reception function of this television is only effective in the countries listed in the Country section during the first time installation menu Depending on country area some of this television s functions may not be available Reception of future additional or modified services cannot be guaranteed with this television If stationary images generated by 4 3 broadcasts text services channel identification logos computer displays video games on screen menus etc are left on the television screen for any length of time they could become conspicuous It is always advisable to reduce both the brightness and contrast settings Very long continuous use of the 4 3 picture on a 16 9 screen may result in some retention of the image at the 4 3 outlines This is not a defect of the LCD TV and is not covered under the manufacturer s warranty Regular use of other size modes will prevent permanent retention EXCLUSION CLAUSE Toshiba shall under no circumstances be liable for loss and or damage to the product caused by i fire ii earthquake iii accidental
6. gt Set the language used in menus NU Ext Preferred These settings will be used if available Otherwise the current settings will be used Audio By pressing Left or Right button change the audio language Subtitle Alter the subtitle language with Left or Right button The chosen language will be seen in subtitles Teletext Changes the preferred teletext language Guide By pressing Left or Right button change the guide language Current Audio If audio language is supported change the audio language by pressing Left or Right button Subtitle If subtitle is backed up alter the subtitle language with Left or Right button The chosen language will be seen in subtitles English 24 Digital Settings Parental Control Menu Lock Set PIN You can view or set parental preferences of your TV Viewing Parental Control Menu Press MENU button and select the Settings by using Left or Right button Press OK button to view Settings menu Use Up or Down button to highlight Parental and press OK to continue Enter PIN e A dialogue box asking for the lock key will be displayed e If itis incorrect Wrong PIN OSD will be displayed If it is correct the Parental Control menu will be displayed Parental Settings Menu lock Off Maturity Lock Off Child Lock Off Set PIN Mer v Navigate lt gt Change Value retza Baek MENU EXIF Note Default PIN can be set to 0000 or 1234 If you have def
7. To Connect a Computer rrrrnrnnnnrnnnannnvnrnnnnnne 11 Connecting a DVD Player Connecting to a DVD Player via YPbPr 11 To Connect a USB Flash Drive 0008 11 Connecting a home network cccccccseeeeeeeeeeees 12 Power Save Mode ccsscececeeseseeeeeseeneeeeeeess 13 Environmental Information ccccccseeeeeeeeees 13 Controlling NE TV cass sacrccabinasndcatretdendexinennaaecmameaens 14 SWitehiIng ON sre segssqcannepacesavantectececeneesadtiecnenneice 14 Using the Remote Control cccccsseseeeeeees 14 Using the Controls on the TV c sseeceeeeees 14 Initial Installation vecintmcritsccouacoeuisdatetiaidarcindneietantentss 15 TE ET 0 NE E E 18 Auto TUNG sasaran niai 18 Auto Channel Scan Menu Operation 18 Manual Tuning Analogue Fine Tuning 19 Digital Aerial Manual Search 00cccee 19 Digital Cable Manual Search srrnrrrrnnneenne 19 Analogue Manual Search rrrnnnrnnnrrrvrrnnnnnnnr 19 Digital Satellite Manual Search rrrnnnnnnnnnnr 19 Analogue Fine TUne cccccssseesssssseeseeeeeees 20 Clear Service List c c csssscccecsssseeeeessenees 20 General Operation sicecscccesdccdlacianstovesteptecexcaveccssscccs 21 Stereo and Bilingual Transmissions 21 Displaying Subtitles rrsrrnrrnrrrnnrrnrrvnrrnnsrnnnre 21 Viewing Main Menu
8. When you start a search a message will appear asking whether you want to load preset list or not This function is correct for countries Germany and Austria For other countries select No and channel order will be applied if applicable SartcoDX allows the user to upload a preset list if supported by the broadcaster See Satellite Settings section English 16 Initial Installation continued While the search continues a message will appear asking whether you want to sort channels according to the LCN Select Yes and press OK to confirm LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence if available After the available stations are stored Edit Channel List will be displayed on the screen Edit Channel List 20 RaiNotizie24 21 Rai Edu1 DTV 22 Rai Gulp om 23 RAI Sport pil DTV 24 SAT2000 ma 25 Rete4 1 ma 26 Canale5 1 om 27 Italia 1 me 28 Rai Test HD m 29 BBC HD Ho Move Delete Edit name T Watch aa UP DOWN Press OK button to quit channel list and watch TV Note Do not turn off the TV while initializing first time installation English 17 Auto Tuning Auto Tuning As new services are broadcast it willbe necessary to retune the television in order to view them e It is recommended to run Auto Tuning periodically to ensure that all new services are added Please b
9. SCREEN amp 3 button repeatedly to select between Auto Full 16 9 Subtitle 14 9 14 9 Zoom 4 3 or Cinema Using the special functions to change the size of the displayed image i e changing the height width ratio for the purposes of public display or commercial gain may infringe on copyright laws You can shift to screen up or down by pressing A W buttons while picture zoom is selected as 14 9 Zoom Cinema or Subtitle When Auto is selected the aspect ratio of the screen is adjusted by the information provided by the selected source if available The format being displayed in Auto mode is completely independent of WSS information which could be included in the broadcast signal or the signal from an external device Note Auto mode will only be available in SCART HDMI YPbPr and DTV Full mode is only available on HD channels ME EE 1 Use this setting when watching a widescreen DVD widescreen video tape or a 16 9 broadcast when available Due to the range of Ul lll widescreen formats 16 9 14 9 etc me black bars may be visible on the top and bottom of the screen PAL B G When subtitles are included on a j letterbox format broadcast this 7 rarer EST Subtitle setting will raise the picture to ensure HI I ill that all the text is displayed I PAL B G This zooms up the wide picture 14 9 aspect ratio to the upper and lower limits of the screen
10. Sn NNS TOMOS CONIO Check if the batteries are exhausted or inserted incorrectly ER ETT browser Make sure the USB stick HDD is connected correctly Incorrect ae apenas operation may occur from a USB Hub connection p l Check your network setup if using a media server ete ul Subtitles are not currently being transmitted by the broadcaster Why is the digital channel locked Parental control is activated Check parental settings dt digital Your subscription needs upgrading Contact your service provider When in active standby the TV s active standby will automatically Why does the active standby LED search all available channels for updates provided automatic update sometimes take longer to go out is enabled The required time to do this may vary Led blinks as red and green in this mode er eee Check if CHILD LOCK is selected or not General What is DVB T Digital Video Broadcast via an aerial antenna What is DVB C Digital Video Broadcast via a cable system What is DVB S S2 Digital Video Broadcast via a Satellite dish How are radio channels selected What can be done if the PIN is forgotten You can select them via Channel list You can reset the TV and perform the First Time Installation again Ensure that no one else is aware of this procedure by securely storing the Owner s Manual If you are asked to enter a PIN to perform the First Time Installation consult your authorized retailer Why don t the networked dev
11. To select a programme position use the numeric buttons on the remote control Programme positions can also be selected using PW or PA buttons Press INFO button to display the on screen information i e programme position stereo mono signal and picture format English Standby Notifications If the TV switches off while in No Signal mode the following on screen message will be displayed on the next switch on TV switched to stand by mode automatically because there was no signal for a long time When the Auto TV OFF timeout is reached the following message will be displayed on the screen Select Yes to shut down the TV Select No to cancel The TV will switch off as well if you do not make a selection on this screen Shut Down If the TV switches off owing to the auto power down feature the following on screen message will be displayed on the next switch on TV switched to stand by mode automatically because no operation was made for a long time 21 Channel List Sorting Programmes Programme Locking You can view stored channels and sort them by using the Channel List feature Viewing Channel List The channel order may be changed to suit your per sonal preference e Select Channel List from the main menu and press OK button The following menu will be displayed Channel list Active Channel List e Select Edit Channel List to manage all stored channels Use Up or
12. Use Left or Right button to set The timer can be set to Off or between 30 minutes and 2 hours 120 minutes in steps of 30 minutes Setting Programme Timers This feature will set the television to go to a specific channel at a certain time It can be used to view a particular programme or can be used to view a series of programmes by setting the Repeat option to Daily Weekly or Weekdays Press Down button to highlight a timer on an event Programme timer function buttons will be displayed on the screen Note This feature will be available only when a timer has been programmed Adding a Timer Press YELLOW button on the remote control to add a timer The Add timer menu appears on the screen Network Type Set the network type to filter the channels that will be listed in the Channel option Timer Type You can select timer type as Record or Timer Channel Changes channel by using Left or Right Record Type You can select timer type as Record or Timer Date Enter a date using the numeric buttons Start Enter a starting time using the numeric buttons End Enter an ending time using the numeric buttons Duration Displays duration between the starting and ending time Repeat Sets a timer to be repeated as Once Daily Weekly or Weekdays Change Delete There are two options available Allowed and Disallowed If this option is set as Disallowed a PIN is required to change or delete the programmed timer Pla
13. Viewing Style in Media Browser Settings menu is set to Folder the files will be displayed as sorted and there is no need to sort files again by pressing the RED button In that case the RED button will not function anyway e Loop Shuffle Green button Press once to enable Loop Press again to enable both Loop and Shuffle Press once more to disable Loop Press again to disable Shuffle You can follow the disabled and enabled functions with the change of the icons e Jump Numeric buttons Type the file number using the numeric buttons on your remote to jump to a file directly The file with the typed number will be only highlighted and will not be played e Play This OK button Play the selected file e Previous Next Left Right buttons Jump to previous or next file and play e Yellow button Change viewing style e Blue button Change media type e Swap button Open the Device Selection menu This option appears only when more than one media source is detected Viewing JPEG Files To view photo files from a USB Memory or media server you can use this menu screen When you select Photos in the main Media Browser menu available image files will be filtered and listed on this screen Photos Media Browser 0002 dsc04910 0003 dsc04916 62K8 800x600 fo v Navigate Jump Sort By Date Toggle View Style V A Navigate menu e Jump Numeric buttons Type the file number using the numer
14. channel Enter PIN Record Delete Record Timer Select Record option and press the OK button If the programme N is going to be broadcasted at a future time it will be added to Timers list to be recorded If the selected programme is being broadcasted at the moment e Enter the 4 digit PIN number to continue recording will start immediately Note Default PIN can be set to 0000 or 1234 If you have i defined the PIN is requested depending on the country To cancel an already set recording highlight that selection during the First Time Installation or changed the programme and press the OK button and select default PIN later from the Set PIN option under the Parental the option Delete Rec Timer The recording will Settings menu use the PIN that you have defined be cancelled Electronic Programme Guide Note You cannot switch to any other channel or source Select the on screen guide by pressing GUIDE while there is an active recording on the current channel button the guide screen will appear highlighting Set Timer on Event Delete Timer You can set details of the channel and programme currently timer for future programmes using this option being viewed This may take a few moments to To cancel an already set reminder highlight that appear programme and press the OK button Then select Delete Timer option The timer will be cancelled Programme Guide Thu 07 06 21 19 Note It is not possible to record or set timer fo
15. damage iv intentional misuse of the product v use of the product in improper conditions vi loss and or damage caused to the product whilst in the possession of a third party vii any damage or loss caused as a result of the owner s failure and or neglect to follow the instructions set out in the owner s manual viii any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment Furthermore under no circumstances shall Toshiba be liable for any consequential loss and or damage including but not limited to the following loss of profit interruption of business the loss of recorded data whether caused during normal op eration or misuse of the product English 5 Important safety information e Any function related to the digital television with the DVB logo is available only within the country or area where such signals are transmitted Verify with the salesperson if it is possible to receive a DVB T C S S2 signal in the area where you live e Even if the television conforms to the required DVB T C S S2 specifications the compatibility with future digital DVB T C S S2 transmissions is not guaranteed e Some digital television functions may not be available in certain countries e The DVB T C S S2 system present in this device allows reception of both FTA Free To Air and Encrypted channels Note Encrypted channels require a s
16. device must be connected to the TV first You can upload current services and related satellites amp transponders in TV to a USB device file extension will be sdx In addition to the uploading feature you can download one of the SatcoDX files stored in USB device to the TV When you select one of these SatcoDX files all services and related satellites and transponders in the selected file will be stored in TV If there are any installed terrestrial cable and or analog services they will be kept and only satellite services will be removed Afterwards check your antenna settings and make changes if necessary An error message stating No Signal may be displayed if antenna settings are not configured properly English 35 Other Controls Configuring Other Settings General You can configure the settings of your TV Select Settings from main menu and press OK to view the Settings menu Press the MENU button on the remote control to exit To view general configuration preferences select Other Settings in the Settings menu and press OK button Other Settings Menu Timeout Scan Encrypted Channels Yes HbbTV On Blue Background Off Software upgrade V 3 5 6 Application Version V 3 3 6k Hard Of Hearing On Audio Description Off Auto TV OFF 8 Hours Standby Search On Biss Key OK Store Mode Disabled Media Renderer Enabled Power Up Mode Standby gt Change Value Navigate Operation e P
17. in the Cl slot of your TV e Obtain the Conditional Access Module CAM and the viewing card by subscribing to a pay channel company then insert those to the TV using the following procedure e Insert the CAM and then the viewing card to the slot that is located in the terminal cover at the rear side of the TV e The CAM should be correctly inserted it is impossible to insert fully if reversed The CAM or the TV terminal may be damaged if the CAM is forcefully inserted Connect the TV to the mains supply switch on and then wait for few moments until the card is activated e When no module is inserted No common interface module detected message appears on the screen e Refer to the module instruction manual for details of the settings Viewing Conditional Access Menu These menu settings may change depending on the service provider Press MENU button and select Settings by using Left or Right button Press OK button to view Settings menu Use Up or Down button to highlight Conditional Access and press OK to view menu items 31 Setting Timers Timers To view Timers menu press MENU button and select Settings by using Left or Right button Press OK button to view Settings menu Use Up or Down button to highlight Timers and press OK to continue Setting Sleep Timer The television can be set to turn itself off after a certain length of time e Highlight Sleep Timer by using Up or Down button e
18. set and press Down button to highlight the Search Type option Use Left or Right to set the desired search type Available search types are Digital only Analogue TV only and Full 4 When set press Down button to highlight Teletext Language Use Left or Right button to select desired language region Highlight Scan Encryted Channels and enable disable this option by using Left or Right buttons Press OK English to continue Note Depending on the Country selection you may be asked to set and confirm a PIN at this point The selected PIN cannot be 0000 You have to enter it if you are asked to enter a PIN for any menu operation later 5 The following message will be displayed next on the screen If the TV is to be used in a store please select the Store Mode For domestic use Home Mode Is recommended Store Mode Home Mode Select Store mode if the TV will be placed in a store to exhibit This option will configure your TV s settings for best display quality and the supported features of the TV will be displayed on the top of the screen as a info banner If Store mode is selected a confirmation screen will be displayed Select YES to proceed For home use select Home Mode This option will be available in Other Settings menu and can be turned off on later 6 Press OK button on the remote control to continue and a message will be displayed asking wheter you want to do network settings Select Yes and the Netw
19. si icddindmncinsutiaratiorbelmvinundieniinawies 26 EE RJ NE ER 27 Changing Picture Forma kuuunvnsdnamre 28 Configuring PC Picture SettingS ccccce 29 PC Picture Settings Luarvranmsrusissmsns 29 PC Picture toiidls Luurvv4vv4vq 4sr1np0usersee 29 FP 29 POO SION EE NE 29 FP e E E 29 V POSON cea a 29 DOU OCK EEE 29 EE S 29 Configuring Sound Setiingsauuasmemamirseminnsnv 30 Configuring Sound Settings rrrrrrrrrrnnrrrvrnnn 30 Operating Sound Settings Menu ltems 30 ONG css me 30 Equalizer Only for speaker c ccccsseeeeeeees 30 Balance Only for speaker rrrnnrrrnvrvrnnnnrnnrr 30 Headphone cecescceccspestsurdcnsuontetneaeddischeateececenenced 30 Sound Mode a atcctesnccatsnnasnsuesdacapeedtsxeenenareecaneuces 30 EE NN 30 Headphone Lineout rrrrnrrrrrrnnnrrrvrnnrnrvnnnnnnnn 30 DYNAMIC DAS EEE 30 Surround SOUNC sessncndsnnssetusndeedanedtengenedaendecanenties 30 Digtal ve AEEA 30 Settings Menu Operation Conditional Access 31 Configuring Your TV s Settings ccccee 31 Viewing Settings M Nnu ccccccsssseeeessseeeees 31 Using a Conditional Access Module 31 Viewing Conditional Access Menu 31 English 2 Contents Setting MME S ssania idih nesas 32 TE 32 Setting Sleep Timer rrrrrrnnrrnnnrnvrnvrrnnnrnnvrnnnnn 32 Setting Programme Timers rrrrrnrrrnnnrnnvrnnnnn 32 Adding a TE 32 Editing a TIMET fersi
20. storage devices with high storage capacities for recording HD programmes Lip Sync delay may occur during the timeshifting Radio record is supported The TV can record programmes up to ten hours Recorded programmes are split into 4GB partitions Do not plug out the USB storage device during a recording This may harm the connected USB storage device Multipartition support is available Amaximum of two different partitions are supported The first partition of the USB storage device is used for PVR ready features It also must be formatted as the primary partition to be used for the PVR ready features It is recommended to use a non partitioned USB storage device Some stream packets may not be recorded because of signal problems as a result sometimes the picture may freeze during playback Record Play Pause Display for PlayListDialog keys can not be used when teletext is ON If a recording starts from timer when teletext is ON teletext is automatically turned off Also teletext usage is disabled when there is an ongoing recording or playback English 40 Using Media Browser This TV allows you to enjoy photo music or video files stored on a USB device or media server Manual Start To display Media Browser window press the fe button on the remote control The Media Browser menu is also accessable from the main menu Press the MENU button on the remote Select Media Browser by pressing Left or Right butt
21. supplied Side AV connection cable s RED and WHITE inputs see illustration PC VGA Cable not supplied RGB PC Input back Side Audio Video Connection Cable supplied PC Audio Cable not supplied Lied gt 63 lt a al SIDE AV Input y Match Colours To use a PC set the monitor output resolution on the PC before connecting it to the TV To display the optimum picture use the PC setting feature NOTE e Some PC models cannot be connected to this TV An adaptor is not needed for computers with a compatible mini D sub15 pin terminal e Depending on the DVD s title and the specifications of the PC on which you are playing the DVD Video some scenes may be skipped or you may not be able to pause during multiangle scenes Connecting a DVD Player Connecting to a DVD Player via YPbPr Some DVD players are connected through COMPONENT SOCKETS YPbPr In this case you must use the supplied Component YPbPr video connection cable for enabling connection First plug the single jack of the cable to the TV s YPbPr socket side Afterwards insert your YPbPr cable s not supplied connectors into the plural part of the supplied YPbPr video connection cable see illustration below Colours of the connected jacks should match To enable audio connection use the supplied Side AV connection cable First plug single jack of the cabl
22. your TV in which the programmes are stored Recordings Wed 22 10 05 04 Name Start Length Holby City Holby City Springwatch 07 06 07 21 19 30s 07 06 07 20 26 54s Used 370 MB Reserved 1382 MB Free space 263 MB Zs Play Options All the recordings are kept in a list Select an item from the list by using Up or Down button Red button Erases the selected recording Green button Makes changes on the Delete and Playback options of the selected recording Blue button Changes the order of the recordings You can select from a wide range of sorting options OK button Opens the Play options menu Select an option by using Up or Down and press OK Using Media Browser continued This TV allows you to enjoy photo music or video files stored on a USB device or media server Play options Play from start Resume Play from offset e Play from start Plays the selected recording from the beginning e Resume Recommences the selected recording e Play from offset Specifies a playing point for the selected recording Resume P button Recommences the recording Details INFO button Displays information on the selected recording Media Browser Settings Settings iew Style Flat ideshow Interval 5 sec how Subtitle On V S S Subtitle Language S S English ubtitle Position Down ubtitle Font Size 47 pt Flat view style displays all files in removable device Folder
23. 2E Polarisation Symbol Rate Network channel scan Satellite DiSEqC 1 Signal quality Signal level 19 Manual Tuning Analogue Fine Tuning continue The television can be tuned in manually using Manual Search feature e After selecting search type as Satellite you can set the desired options and press OK button to search In satellite manual scan you can enter frequency polarisation symbol rate values and change network channel scan and satellite options by using left right buttons or numeric buttons on the remote You can then press OK button to search If you enter invalid manual tune settings a warning massage is displayed on the screen Note Frequency polarization and symbol rate may change in accordance with the selected channels Analogue Fine Tune e Select Analogue Fine Tune from the Install and Retune menu by using Up or Down and OK buttons Analogue fine tune screen will be displayed Analogue Fine Tune feature will not be available if there are no analogue channels stored e Use Left or Right button to set Fine Tune When finished press OK button Clear Service List This setting is visible only when the Country option is set to Denmark Sweden Norway or Finland e Select Clear Service List from the Install and Retune menu by using Up or Down and OK buttons A confirmation message will be displayed If you want to delete all channels select Yes and press OK Use this setti
24. A Max RGB PC Input VGA ONE SPDIF O Coax OUT DIGITAL AUDIO Socket SCART Socket HE i ETETA P SCART Side View COMMON INTERFACE lt The Common Interface is for a Conditional Access Module CAM COMMON INTERFACE HDMI Input Sockets USB Satellite a Input j 1 SVde Max 500mA USB Inputs SIDE AV 8 lt Headphone 0 lt _ YPbPr Oris Pad Aerial Satellite Number of these inputs may change according to the model of your TV Connect the LNB from the satellite dish to the Satellite Antenna socket on the rear of the TV If your satellite connection is different suitable adaptors are available from most satellite equipment retailers SCART has AP If you use a decoder or a media recorder it is essential that the scart cable is connected to the TV Before running first time installation any connected devices need to be set to standby mode The DIGITAL AUDIO socket enables the connection of a suitable surround sound system HDMI High Definition Multimedia Interface is for using with a DVD decoder or other equipment with digital audio and video output It is designed for best performance with 1080i and 1080p high definition video signals but will als
25. Browser menu Select an item from the list if previously recorded Press the OK button to view the Play options menu Select an option then press OK button Press the Stop button to stop a playback and return to the Recordings menu Note Viewing main menu and menu items will not be available during the playback Slow Forward If you press Pause button while watching recorded programmes the slow forward feature will be available You can use Rapid advance BR button to slow forward Pressing this button consecutively will change slow forwarding speed About the USB Record Feature e Recorded programmes are saved into the connected USB storage device If desired you can store copy recordings onto a computer however these files will not be available to be played on a computer You can play the recordings only via your TV The TV supports only FAT32 formatted USB storage devices for recording functions If this is not the case the USB storage device should be formatted first using the Format Disk option in the Settings Recording Configuration menu To use recording feature your USB storage device should have at least 2 GB free space and be USB 2 0 compatible If the USB storage device is not compatible an error message will be displayed If the writing speed of the connected USB storage device is not sufficient the recording may fail and the timeshifting feature may not be available It is recommended to use USB
26. Down and OK buttons to select Edit Channel List Edit Channel List 20 RaiNotizie24 21 Rai Edu1 22 Rai Gulp 23 RAI Sport pi 24 SAT2000 25 Rete4 1 26 CanaleS 1 27 Italia1 1 28 Rai Test HD 29 BBC HD DTV me mva me ma DTV mva mva HD Edit name Lock OK Move Delete I Watch r Page UP DOWN lt gt Function Navigate Filter MENU JE cc SB ack Jump e Press Up or Down button for selecting a channel You can press PV or P button to move page up or page down e To watch a specific channel highlight it by using Up or Down button Afterwards press OK button e Press BLUE button to view filtering options e Press MENU or EXIT button to exit Note The channels listed are mixed at the channel list Channel types can be differentiated by the icons next to them DTV digital tv HD HD TV ATV Analogue TV TV TV Radio symbol Radio encrypted lock and FAV symbols for channels in the favourite list Listed channels can also be sorted by using the active channel list filter Moving a Channel e Highlight the desired channel by using Up or Down button e Select Move option in the channel list by using Left or Right button and press OK button e Edit Number screen will be displayed Enter the desired channel number by using the numeric buttons on the remote control and press OK If there is a previously stored channel on that number a warning sc
27. Manual Search Seaicli Type 050 00 MHz Auto 6900 Disabled Frequency Modulation Symbol Rate Network channel scan Signal quality Signal level English Analogue Manual Search The television can be tuned in manually For example if the television cannot be connected to a media recorder decoder with a SCART lead or to tune in a station on another System To allocate a programme position on the television for a decoder and media recorder turn the decoder on insert a pre recorded film into the media recorder and press PLAY then manually tune Manual Search Search Type Rand TV System l Channel 01 Frequency 049 75 MHz Signal quality Signal level After selecting search type as Analogue you can use Up or Down button to highlight an item and then press Left or Right button to set an option Enter the channel number or frequency using the numeric buttons You can then press OK button to search When the channel is located any new channels that are not on the list will be stored Digital Satellite Manual Search Note If the Satellite installation is not completed by the first time installation FTI you are not able to run manual satellite search You will be directed with a warning massage to do Antenna Installation first which you can find under the Satellite Settings in Settings menu Manual Search Search Type atellite Frequency 11597 Vertical 22000 Disabled Astra 1 19
28. Radio Interference Filter the removal of which will impair its performance It should only be replaced by a correctly rated and approved type IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN Warning To prevent the spread of fire keep candles or other open flames away from this product at all times Do DO read these operating instructions before you attempt to use the equipment DO ensure that all electrical connections including the mains plug extension leads and interconnections between pieces of equipment are properly made and in accordance with the manufacturers instructions Switch off and withdraw the mains plug before making or changing connections DO consult your dealer if you are ever in doubt about the installation operation or safety of your equipment DO be careful with any glass panels or doors on equipment English This equipment has been designed and manufactured to meet international safety standards but like any electrical equipment care must be taken to obtain the best results and for safety to be assured Please read the points below for your own safety They are of a general nature intended to help with all electronic consumer products Do not DON T remove any fixed cover as this may expose danger ous voltages DON T obstruct the ventilation openings of the equipment with items such as newspapers tablecloths curtains etc Overheating will cause damage DON T allow electrica
29. TAL PLUS Disposal The following information is only for EU member states Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste Integrated batteries and accumulators can be disposed of with the product They will be separated at the recycling centres The black bar indicates that the product was placed on the market after August 13 2005 By participating in separate collection of products and batteries you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health For more detailed information about the collection and recycling programmes available in your country please visit our website www toshiba eu recycling or contact your local city office or the shop where you purchased the product Disposal of batteries and or accumulators The crossed out wheeled dust bin symbol indicates that batteries and or accumulators must be collected and disposed of separately from household waste If the battery or accumulator contains more than the specified values of lead Pb mercury Hg and or cadmium Cd defined in the European Battery Directive then the chemical symbols for lead Pb mercury Hg and or cadmium Cd will appear below the crossed out wheeled dust bin symbol By participating in separate collection of batteries you will
30. TOSHIBA Leading Innovation gt gt gt ON LINE MANUAL 32L344 DG LED Backlight LCD Satellite TV During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance You can download the latest version of firmware from www toshiba om net firmware php some features listed in this document are limited due to local legislation and may not be available in all countries Contents Safety Precautions ss ccaicecscadaaceacsaavsatnandeseetieaniavesanians 4 AT CIC UIALIOM sxc cacaoissessnaintinistinlndarennltnctcetanineneceaantonnedet 4 Heat Damage tantesaciasicnat stinteedaemiueriulagciianiemantemianis 4 Mains SUpply EE seach veaavosayeactents 4 AE Te EEE O 4 lo ERE ERE 4 DOMO EN nue E EN E 4 Installation and Important Information 0 5 EXCLUSION CLAUSE ccccccccsssssseeeeeeeees 5 Important safety information rrrrrrnrrrrvrrrrrnnnrnr 6 Fitting or Removing the pedestal stand T The Remote Control cccccssssseeeceseseseeeeseeeeees 8 Inserting Batteries and Effective Range of the Remote COMM ac vi 20 cacscaceadencsascesneinencerdenienceescets 8 Connecting External Equipment ccccceee 9 Connecting an HDMI or DVI Device to the HDMI MO eek 10 To Connect an HDMI Device rnrnnnrnnnrnnvrnnnnnnr 10 To Connect DVI DEVICE Luunsnenaseinsviss 10 Connecting Comput r uuueseemmndmennenmssdersn 11
31. This product is carrying the CE Mark in accordance with the related European Directives Responsible for CE Marking is TOSHIBA 23 Davy Road Plymouth PL6 8BY UK This product is labeled with the CE Mark in accordance with the related European Directives notably Low Voltage Directive 2006 95 EC Electromagnetic Compatibility Directive 2004 108 EC and RoHS Directive 2011 65 EU Furthermore the product complies with the Ecodesign Directive 2005 32 EC EuP and 2009 125 EC ErP and its related implementing measures If this product has an integrated Wireless LAN feature the Radio Equipment and Telecommunications Terminal Equipment Directive 1999 5 EC is also applicable TOSHIBA 23 Davy Road Plymouth Devon PL6 8BY England All rights reserved Reproduction in whole or part without written permission is strictly prohibited This equipment corresponds to requirements of the Technical Regulation on limitation of usage of certain dangerous substances in electrical and electronic equipment English 54
32. an configure picture settings of your TV by using Picture Settings menu Configuring Picture Settings You can use different picture settings in detail You can customize current picture mode settings as desired For example you can change items such as Brightness Contrast Colour and Sharpness Press MENU button and select Picture by using Left or Right button Press OK button to view Picture Settings menu Picture Settings Mode Contrast Brightness Sharpness Colour Power Save Mode Backlight Noise Reduction Advanced Settings Reset EJ Navigate Exit EEJ Change Value Operating Picture Settings Menu Items e Press Up or Down button to highlight a menu item e Use Left or Right button to set an item e Press MENU button to exit Mode This TV offers the choice of personalising the picture style Natural Cinema Game Sports and Dynamic are preset options and affect settings within the TV Press Left or Right button to select the picture mode you prefer Note Some options may be inactive depending on the selected mode Contrast Sets the lightness and darkness values of the screen Press Left or Right button to adjust the contrast Brightness Sets the brightness value for the screen Press Left or Right button to adjust the brightness Sharpness Sets the sharpness value for the objects displayed on the screen Press Left or Right button to adjust the sharpness Colour Set
33. be required This feature allows you to record and play back digital broadcast contents stored on a USB storage device Before you use this function connect a USB storage device to the TV first while the TV is switched off You should then switch on the TV to enable the recording feature Instant Recording Press REC button to start recording an event instantly while watching a programme When Press record to add more events message is displayed on the screen you can press REC button on the remote control again to add the next event on the Programme Guide to Timers list to be recorded In this case an OSD will be displayed indicating the programmed events for recording Press Stop button to cancel instant recording You can not switch broadcasts or view the Media Browser menu during the recording mode While recording a programme or during the timeshifting a warning message appears on the screen if your USB device speed is not sufficient Timeshift Recording Press Pause button while watching a broadcast to activate timeshifting mode In timeshifting mode the programme is paused and simultaneously recorded to the connected storage device Press Play button again to resume the paused programme from where you stopped Press the Stop button to stop timeshift recording and return to the live broadcast Timeshift cannot be used while in radio mode Watching Recorded Programmes Select the Recordings from the Media
34. ch remove the mains plug from the wall socket Signal information for Mini D sub 15 pin connector N TPinNe Signal name PinNe 6 com nm gt 7 com me gt 8 come 8 nom KE Er Zo E NC not connected English 49 Appendix D Supported File Formats for USB Mode MPEG1 2 Layer 1 2 3 AAC HEAAC AC3 EAC3 LPCM ADPCM MPEG2 H 264 VC1 AVS MPEG1 2 Layer 1 2 3 MVC ts trp tp m2ts LPCM ADPCM AAC HEAAC AC3 EAC3 1080P 30fps 50Mbit sec H 264 1080Px2 25fps 1080P 50fps MVC 1080P 24fps Other 1080P 30fps 50Mbit sec MPEG2 MPEG1 2 Layer 1 2 3 1080P 30fps 50Mbit sec AC3 LPCM MPEG1 2 Layer 1 2 3 AAC HEAAC AC3 EAC3 LPCM MPEG1 2 4 XviD H 264 VC1 WMV3 Motion JPEG MPEG1 2 4 Xvid H 264 VC1 WMV3 Sorenson H 263 Motion JPEG fla flv H 264 MPEG1 2 Layer 3 AAC EE HEAAC LPCM ADPCM MPEG1 2 Layer 3 AAC HEAAC AC3 EAC3 LPCM ADPCM MPEG1 2 Layer 1 2 3 LPCM ADPCM WMA AAC HEAAC AC3 EAC3 H 264 1080Px2 25fps 1080P 50fps 1080P 30fps 50Mbit sec H 264 1080Px2 25fps 1080P 50fps Other 1080P 30fps 50Mbit sec H 264 1080Px2 25fps 1080P 50fps 1080P 30fps 50Mbit sec H 264 1080Px2 25fps 1080P 50fps 1080P 30fps 40Mbit sec 39p MPEG4 H 264 L 1920x1080 30P 20Mbit sec asf wmv MPEG2 4 XviD H 264 MPEG1 2 Layer 1 2 3 1080P 30fps 50Mbit sec VC1 WMV3 AAC HEAAC AC3 EAC3 LPCM WMA Baseline Pro
35. cket and audio cables to the RED and WHITE SIDE AV AUDIO inputs on the Audio Video connection cable supplied see illustration e The maximum recommended HDMI to DVI cable length is 6 6 ft 2m e An HDMI to DVI cable transfers video only Separate analogue audio cables are required SIDE AV Input gt TOSHIBA lt a Side Audio Video Connection Cable supplied red ene __ Number of HDMI Input Z these inputs Sockets may change Match gg l according to corps the model of EE El your TV Audio Transfer Audio Cable Video Transfer 2 not supplied gt HDMI to DVI Cable 5 not supplied 7 NOTE To ensure that the HDMI or DVI device is reset properly it is recommended that you follow these procedures e When turning on your electronic components turn on the TV first and then the HDMI or DVI device e When turning off your electronic components turn off the HDMI or DVI device first and then the TV English 10 Connecting a Computer To Connect a Computer With either an RGB PC or an HDMI connection you can watch your computer s display on the TV and hear the sound from the TV s speakers When connecting a PC to the RGB PC input on TV use an analogue RGB 15 pin computer cable and use the SIDE AV socket with a PC audio cable not supplied for audio connection using the
36. disabled source options when the SOURCE button is pressed Source Settings v EXT1 RGB Enabled EXT1 S Enabled SIDE AV Enabled HDMI1 Enabled HDMI2 Enabled YPbPr Enabled VGA PC Enabled v__ Navigate gt Change Value MENU BER Edit name e Select Sources in the Settings menu and press OK button e Press Up or Down buttons to select a source e Use Left or Right button to enable or disable the selected source Changes are automatically stored Input Selection Use the Input Selection window if the television does not switch over to a connected source automatically Press SOURCE button on your remote control for directly changing sources Use the Up or Down button to highlight an input and press Right or OK button to select English 34 Satellite Settings Configuring Satellite Settings Select Satellite settings in the Settings menu to configure satellite settings Press OK button Satellite Settings Satellite list Antenna installation SatcoDX Satellite List To view the list of available satellites select this option You can add delete or edit the satellites in the list Antenna Installation You can change antenna settings and start a new satellite scan SatcoDX optional There are two options regarding SatcoDX feature SatcoDX Upload SatcoDX Download SatcoDX E i You can download or upload SatcoDX data In order to perform these functions a USB
37. e a wired or a wireless connection if more detailed information is needed English 12 Power Save Mode Environmental Information This television is designed to be environment friendly You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feauture of this TV To reduce energy consumption you should take the following steps You can use Power Save Mode setting located in the Picture Settings menu If you set Power Save Mode as Eco the TV will switch to energy saving mode and luminance level of TV set will be decreased to optimum level Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode Power Save Mode Eco If pressed Right button Screen will be off in 15 seconds message will be displayed on the screen Select Proceed and press OK to turn the screen off immediately If you don t press any button the screen will be off in 15 seconds Press any button on the remote or on the TV to turn the screen on again If you disable Power Save Mode picture mode will be automatically set to Dynamic It is highly recommended to activate Power Save Mode to reduce your annual power consumption And also it is recommended to disconnect the TV from the mains plug to save more energy when you are not going to use it for a long period of time Repair Information Please refer all servicing to qualified personnel Only q
38. e and Configuration Status will change to Connected IP adreess and Network name will appear which means that the connection is done First enter to Toshiba Portal At first time the Tay button is pressed the TV downloads and installs the latest version of the portal if available Then the introduction page of the portal setup wizard will be displayed Press OK to proceed Next step is End User License Agreement EU LA The user have to scroll the whole text down to the end and check the box next to Agree by highlighting it and pressing the OK button This means that the user accepts the agreement Now the user can highlight Next and proceed by pressing OK The user can skip the rest and portal page will be displayed Account and profile settings can be configured later from the Settings menu on the portal Using the Toshiba Portal You need to configure a home network before using this feature Toshiba Portal is a service where content web sites applications online services etc can be viewed across the web through a simple user interface Press Vay button on the remote Select the desired application using the navigation buttons Press OK to launch the application or go to related link This can take up to a minute or two to connect From the portal page the user can also access to the media files stored on USB storage devices connected to the TV or on the media servers in the same network NOTES
39. e aware that Auto Tuning will completely retune the television and all current channels and settings will be lost e Press MENU button on the remote control and select Install and Retune by using Left or Right button Press OK button and the following menu screen will be displayed Install and Retune Automatic channel scan Retune Manual channel scan Network channel scan Analogue fine tune First time installation Clear Service List a e Select Automatic Channel Scan Retune by using Up or Down button and press OK button Automatic Channel Scan options will be displayed You can select options by using Up or Down and OK buttons Auto Channel Scan Menu Operation Digital Aerial Searches and stores aerial DVB stations Digital Cable Searches and stores cable DVB stations Analogue Searches and stores analogue stations Digital Aerial amp Analogue Searches and stores aerial DVB and analogue stations Digital Cable amp Analogue Searches and stores cable DVB and analogue stations Satellite Searches and stores satellite channels e Whenever you select an automatic search type and press OK button a confirmation screen will appear on the screen To start installation process select Yes to cancel select No by using Left or Right and OK button e After auto channel scan type is set and selected and confirmed installation process will start and progress bar will move along The television will searc
40. e to the Side AV Input of the TV Afterwards insert your DVD player s audio cable s connectors into the plural part of the supplied Side AV connection cable see illustration below Colours of the connected jacks should match Video Connection YPbPr Video Cable Not supplied YPbPr v Connection Cable Match supplied Colours En 7 Audio Connection ee DVD Player To RED amp WHITE inputs m J mo Side AV Connection cable supplied Connecting a USB Memory Side AV Input Audio Cable Not supplied To Connect a USB Flash Drive e You can connect a USB Flash Drive to your TV by using the USB input inputs on the TV This feature allows you to display play music photo or video files stored in a USB stick e It is possible that certain types of USB devices e g MP3 Players may not be compatible with this TV e You may back up your files before making any connections to the TV set in order to avoid any possible data loss Note that manufacturer will not be responsible for any file damage or data loss e Do not pull out USB module while playing a file CAUTION Quickly plugging and unplugging USB devices may cause damage to the USB device English 11 Connecting a home network Connectivity feature allows the TV to connect to the home network wired or wirelessly You can use this networking system to con
41. ect Automatic scanning Edit Upgrade for Satellite Scan for upgrade OK You can enable or disable automatic upgrade by setting the Automatic Scanning option You can select the satellite which is used for updating process by setting Edit Upgrade for Satellite option You can manually start searching for new software by selecting Scan for upgrade and pressing OK button Press RET BACK or MENU button to cancel the process Application Version Displays the current software version Hard of Hearing If the broadcaster enables any special signal concerning the audio you can Set this setting as On to receive such signals e Use Up or Down button to select Hard of Hearing and then press Left or Right button to set this setting as On or Off English 36 Other Controls continued Audio Description Audio description refers to an additional narration track for blind and visually impaired viewers of visual media including television and movies The description narrator talks through the presentation describing what is happening on the screen during the natural pauses in the audio and sometimes during dialogue if deemed necessary You can use this feature only if the broadcaster supports that additional narration track e Highlight Audio Description by pressing Up or Down button e Press OK button to enter Audio Description submenu e Use Up or Down button to select Audio Description setup and then press Left or Right bu
42. ee ipsa erereceiewtecnisiadcenevtossenteet 32 Deleting a TIME cece ccniniabecsxstevsaeeinnceemassins 32 Recording Configuratibn rursmumamsnnesumesidsmenheis 30 Recording Configuration cccccccsseeeeeeeeees 35 Setting DAS TIME wad cescaccncccescsicetsecssesseciciceieetantiee 34 Configuring Date Time SettingS 08 34 Source Settings Configuring Source Settings rrrrrrrnnrrrnvrvnnnn 34 Input Selection ao encase ceraen ded andacciaacs Pocuntezeendacaaces 34 Satellite Settings Configuring Satellite Settings rrrrrrrrere0nnn 35 Other ConirolS san 36 Configuring Other Settings General 36 CD CAO EE EE 36 Menu TIMGQOUE sisistittciiiinciecsstavesdaiienss iunasietvatenan 36 Scan Encrypted Channels c ccccecceeeeees 36 PDD ITV EE cantaese ieee eniauawneaes 36 Blue Background siiciiiiicicessimntesdiiadiiniansariateaaasans 36 Software Upgrade ccccccssssseeeseessseeeeeeseeeees 36 Application Version cccccsecceeeeeeseeeeeeaeeeeees 36 Hard of Hearing soiisisssacecncasastncwaaccadenncmcnectevsaacened 36 Audio DESCNDU ON ieasccaciceenctsacccascaacsdencteceereoenanns 37 Auto TV Ole 37 Standby Search optional rrrrernrrnnnrrrvrnnnnn 37 DISSKCY sisisicnccs dnra iaei aa Eai 37 Store Mode cacccccovacseasrandienieatananteaneandiomsenanenoniaaes 37 Media Renderet cccccccsssseeceeeeseeeeeeseeeseees 37 Power Up Mode ccccccccss
43. eecceseeseeseeesseessaaes 37 Virtual Remote Lunsusammnnsamennaimserimmesennsvunes n ot CEC 444 37 CEC Auto Power On uansenssmsnnsminessets aim 37 Network Settings Portal Internet Browser and TOTOO EE 38 Configuring Network Settings ccccceeees 38 First enter to Toshiba Portal anrrorovnnnnrnnnn 38 Using the Toshiba Portal u u unvvsesmasssuissusii 38 Using the Internet Browser rrrvrnnrnvrnvnnnvrnnnn 38 Using You TUDE E 39 USB Record Feature ccccccssessseeeeeeeeesseeeees 40 Instant RECOIrdING c cccccseeecseseeceseeeseeeesees 40 Timeshift RECording c cccccsessseseeeeeeeneeees 40 Watching Recorded Programmes 06 40 Slow FOSEN 40 About the USB Record Feature 008 40 Using Media Browser Luuuaununninsmnmsnuisn 41 Manual Stari eee eee kisanii 41 PUNO EE EE 41 Playing MP FIGS icinden 42 Viewing JPEG FIES ccctcncccxnsuadasedecnsiaasavesineadadine 42 Slideshow Fe lur u smnnmmnmseesnsnted ein 43 Video PlaybaCk smaa nemtaaneadannd 43 Recording gt eiee is 44 Media Browser SettingS cccccecssssseeeeeeeees 44 Using MENU button in Media Browser Mode 45 To Close the Media Player cccccssseeees 45 Analogue Only Text Services rrrrrrrrnnrrrrvrvnnnnnn 46 Analogue Text Services ccccsssceessseeseeeees 46 Using Text Button TEXT eornnnnornvnrnornvnnnvernnn 46 Acessing Sub Pages
44. eo Playback When you select Videos from Media Browser menu available video files will be filtered and listed on this screen You can use Up or Down button to select a video file and press OK button to play a video Videos Media Browser No File Name 0002 x 0003 30_IMG_2142 B AO 8 tO lt Device Selection Change Media Sort By Name Loop Shuffle Note If you select a subtitle file and press OK button you can Select or deselect that subtitle file Jump Numeric buttons Type the file number using the numeric buttons on your remote to jump to a file directly The file with the typed number will be only highlighted and will not be played Play This OK button Play the selected file V A Navigate menu English LANG ODI I Play Preview Display selected file in a small preview screen Press again to stop preview Red button Sort files by name Play gt button Start to play all files listed beginning with the selected one Yellow Button Change viewing style Loop Shuffle Green button Press once to enable Loop Press again to enable both Loop and Shuffle Press once more to disable Loop Press again to disable Shuffle You can follow the disabled and enabled functions with the change of the icons Blue Change media type Swap button Open the Device Selection menu This option appears only when more than one media source is detected Gi 0003 00 2204 e a Rend Foard xai Subt
45. er electronic devices such as a set top box or DVD player with HDMI or DVI output NOTE e Some early HDMI equipment may not work properly with your latest HDMI TV e Supported Audio format Linear PCM sampling rate 32 44 1 48kHz To Connect an HDMI Device Connect an HDMI cable type A connector to the HDMI ter minal For proper operation it is recommended that you use an HDMI cable with the HDMI Logo H ITW e If your HDMI connection is capable of 1080p and or your TV is capable of refresh rates greater than 50Hz you will need a Category 2 cable Conventional HDMI DVI cable may not work properly with this mode e HDMI cable transfers both video and audio Separate analogue audio cables are not required see illustration e To view the HDMI device video press SOURCE button to select the appropriate HDMI input TOSHIBA _ Number of these inputs may change according to the model of HDMI Input El your TV Socket Back I HDMI device IN DUCT oOOo dO g LI OA O O a O O O A Whe OUT Or CEC CEC operation is available if a CEC device is present This feature is limited to Toshiba disc players that support CEC The CEC osd menu is accessed through the QUICK button on the remote the osd CEC menu will only be displayed if a CEC product is connected To Connect a DVI Device Connect an HDMI to DVI cable HDMI type Aconnector to the HDMI input so
46. etter MPEG Layer 3 audio coding technology licensed from Fraunhofer LLS and Thomson MP4 licence letter THIS PRODUCT IS LICENSED UNDER THE MPEG 4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON COMMERCIAL USE OF A CONSUMER FOR I ENCODING VIDEO IN COMPLIANCE WITH THE MPEG 4 VISUAL STANDARD MPEG 4 VIDEO AND OR II DECODING MPEG 4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON COMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG 4 VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA L L C SEE HTTP WWW MPEGLA COM AVC licence letter THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON COMMERCIAL USE OF A CONSUMER TO I ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD AVC VIDEO AND OR ll DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON COMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA L L C SEE HTTP WWW MPEGLA COM Licence Notification TRADEMARK ACKNOWLEDGMENT Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories DOLBY DIGI
47. g Configuration Start early End late 0 min Max Timeshift 30 min Auto discard Discard None Unplayed Hard disk information Select Format Disk Select Navigate 4 Select Start Early Option serz BACK MENU E Start early You can set recording timer s starting time to start earlier by using this setting End late You can set recording timer s end time to end later by using this settings Max Timeshift This setting allows you to set the maximum time allowed for timeshifting Duration options are approximate and can change accordingly depending on the broadcast received Auto Discard You can set the Discard type as None Oldest Longest or Shortest If the Discard type is not set to None you can set the Unplayed option as Included or Excluded Hard disk information You can view detailed information about the USB storage device connected to your TV Format Disk If you want to delete all files on the connected USB storage device and convert the disk format to FAT 32 you can use this option Press OK button while the Format Disk option is highlighted A menu will appear on the screen requiring you to enter the PIN After you enter the PIN a confirmation message will be displayed Select YES and press OK to start formatting the USB storage device Select NO and press OK to cancel Default PIN can be set to 0000 or 1234 If you have defined the PIN is requested depending on the country select
48. g Configuration Date Time Sources Satellite Settings Network Settings Other Settings Press Up or Down button to highlight a menu item Press OK button to select an item Press MENU button to exit Conditional Access This setting controls conditional access modules when available Use Up or Down button to highlight Conditional Access Press OK button to continue Language Configures language settings Parental Configures parental settings Timers Sets timers for selected programmes Recording Configuration Displays the recording configuration menu Date Time You can configure date time preferences by using this menu screen Sources Enables or disables selected source options Network Settings Configures network settings Satellite Settings Configures satellite settings Other Settings Displays other setting options of the TV set Deactivate Completed message appears on the screen English Using a Conditional Access Module The Common Interface Slot situated on the side of the television enables the insertion of a CAM Conditional Access Module and card These are purchased from a service provider and allow additional subscription broadcasts to be viewed For more information see a service provider IMPORTANT Insert or remove the CAM only when the TV is SWITCHED OFF e In order to watch certain digital channels a conditional access module CAM is necessary This module must be inserted
49. gressive non interlace English 50 MPEG1 2 Layer 1 2 3 MP3 Wans e AAC HEAAC MAX WxH 14592x12288 Up to 8 MegaByte m Sub2 Sub3 Specifications and Accessories Broadcast Systems Channels DVB T MPEG2 DVB T MPEG4 HD DVB C MPEG2 DVB C MPEG4 DVB S 52 MPEG2 DVB S S2 MPEG4 HD Video Input Stereo Nicam External Connections 1 SCART 1 Input 2 SCART S via SCART 1 Input 3 SIDE AV Input 4 HDMI 1 2 Input 5 PC Input 6 Digital Audio Output 7 YPbPr Input 8 LAN port USB Ports For sets with built in wireless unit the Home network with a wireless router must be compatible with Headphone Socket Operating Conditions Supplied Accessories PAL SECAM NTSC 4 43 21 pin SCART RGB A V 21 pin SCART S Video Side AV Cable input Video Audio L R Type Mini D Sub 15 Pin Analogue RGB Signal S PDIF Coaxial YPbPr Connection Jack RJ 45 Media Browser Interface Version USB 2 0 USB Class Mass Storage File System FAT 32 IEEE 80211 a b g n Security Protocols WEP 64 128 WPA WPA2 TKIP AES WAPi 3 5mm stereo Temperature 5 C 35 C 41 F 94 F Humidity 20 80 non condensing Remote Control 2 batteries AAA IEC RO3 1 5V Four screws Side AV cable YPbPr Connection Cable Stand fixing cover P Clip 32 L Energy Efficiency Class A Visible Screen Size approx 80cm 32 On Mode Power Consumption approx 40 W Annual Power Co
50. h for all available stations You must allow the television to complete the search Press MENU button to cancel the process In such a case located channels are not stored Note Menu list of available features may change depending on the model English 18 Manual Tuning Analogue Fine Tuning The television can be tuned in manually using Manual Search feature Digital Aerial Manual Search The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known e Select Manual channel scan from the Install and Retune menu and press OK Manual Search Search Type Channel 45 666 00 MHz Disabled Frequency Network channel scan Signal quality Signal level After selecting search type as Digital Aerial you can enter the multiplex or frequency number using the numeric buttons and press OK button to search e Enter the multiplex number using the numeric buttons The television will automatically search for that multiplex When the multiplex is found any channels not currently on the programme list will be added and the programme information at the top of the screen will be updated e Repeat as necessary Digital Cable Manual Search In cable manual scan you can enter frequency modulation symbol rate and network channel scan options After selecting search type as Digital Cable you can set the desired options and press OK button to search
51. help to assure the proper disposal of products and Hg Cd Pb batteries and thus help to prevent potential negative consequences for the environment and human health For more detailed information about the collection and recycling programmes available in your country please visit our website www toshiba eu recycling or contact your local city office or the shop where you purchased the product English 52 Q amp A Section Question Answer Why is there no sound or picture Check if the TV is not in standby mode Check the mains plug and all mains connections Why is there a picture but no sound Check if the volume has not been turned off or sound mute has not been selected Sound erd dt Check the balance in the SOUND menu if it has been set to one nd side or not ee eE eE The programme is currently being broadcast with an English beenseleced soundtrack only What can cause a poor picture Interference or a weak signal Try a different TV station La Make sure the Blu ray or DVD player is connected to the TV as sl E beings te being illustrated in the beginning chapters then select the correct input per l by pressing the SOURCE button on the remote Picture i z i na pl rts HDD en Check if the correct input has been chosen or not Pee Hede mn and The phase may need adjusting Select PC settings and highlight wheninPE er Phase and adjust until the picture is clear ae SE
52. hifts the image vertically towards the top or bottom of the screen Press Down button until V Position is highlighted Press Left or Right button to adjust the value English Dot Clock Dot Clock adjustment corrects the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts Press Down button until Dot Clock is highlighted Press Left or Right button to adjust the value Phase Depending on the resolution and scan frequency that you input to the TV Set you may see a hazy or noisy picture on the screen In such a case you can use this item to get a clear picture by trial and error method Press Down button until Phase is highlighted Press Left or Right button to adjust the value 29 Configuring Sound Settings You can configure sound settings of your TV by using Sound Settings menu Configuring Sound Settings Sound settings can be configured according to your personal preferences Press MENU button and select Sound by using Left or Right button Press OK button to view Sound Settings menu Sound Settings Volume i 24 Equalizer User Balance li 0 Headphone Ii 20 Sound Mode Stereo AVL Off Headphone Lineout Headphone Dynamic Bass Off Surround Sound Off Digital Out PCM Navigate gt Change Value vo Back MENU BERIT Operating Sound Settings Menu Items e Press Up or Down button to highlight a menu item e U
53. ic buttons on your remote to jump to a file directly e OK View the selected image in full screen e Slideshow gt button Start the slideshow to view all the images automatically e Green button View the images in thumbnails Press again to turn back to previous layout e Red button Sort files by date e Yellow button Change viewing style e Blue button Change media type e Swap button Open the Device Selection menu This option appears only when more than one media source is detected English 42 Using Media Browser continued This TV allows you to enjoy photo music or video files stored on a USB device or media server Slideshow Feature You can use this feature to display all images automatically on your USB device or media server dsc04904 jpg 62KB 800600 18 MEG e Pause f button Pause the slideshow e Continue gt button Continue the slideshow e Loop Shuffle Green button Press once to enable Loop Press again to enable both Loop and Shuffle Press once more to disable Loop Press again to disable Shuffle You can follow the disabled and enabled functions with the change of the icons e Previous Next Left Right buttons Jumps to previous or next file on slideshow When pressed the slideshow pauses e Rotate Up Down buttons Rotate the image using up down buttons When pressed the slideshow pauses Return Back Back to file list e Info button Display info bar Vid
54. ices work Check the LAN cables if they are connected properly or not If it is wireless connection make sure the wireless network settings are done accordingly Why doesn t the recording function work Try switching off the TV and then re inserting the USB device while the TV is switched off Why USB is too slow message is displayed on the screen while starting a recording Try restarting the recording If you still get the same error it is possible that your USB disk does not meet the speed requirements Try connecting another USB disk English 53 REACH information The European Union EU chemical regulation REACH Registration Evaluation Authorization and Restriction of Chemicals entered into force on 1 June 2007 with phased deadlines to 2018 Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation Please consult the following website www toshiba eu reach for information about the presence in our articles of substances included on the candidate list according to REACH in a concentration above 0 1 weight by weight Toshiba herby declares that this product with an integrated Wireless Function is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC ce EU Conformity Statement
55. ined the PIN is requested depending on the country selection during the First Time Installation use the PIN that you have defined Menu Lock In Menu lock you can set locking for All menus or the Installation menu to restrict access to these menus If the menu lock is disabled there will be free access to the menu system e Use Up or Down buttons to go to Menu Lock option Use Left or Right buttons to choose Menu Lock Mode OFF All menus are unlocked ALL MENUS All Menus are accessible only with the correct lock key So the user cannot add delete rename channels or set timers INSTALLATION MENU Installation menu is locked So the user can t add channels Maturity Lock When set this option gets the maturity information from the broadcast and if this maturity level is disabled disables access to the broadcast Note Maturity Lock is not available in all countries English Child Lock Child Lock disables the buttons on the television All buttons on the remote control can still be used Set PIN e Use Up or Down buttons to select Set PIN option Press OK to display the Set PIN window e Use numeric buttons to enter new pin number You will need to input your new pin a second time for verification purposes e After typing correct PIN numbers PIN number will be changed Note If you change the pin number make sure you write it down and keep it safe 25 Configuring Picture Settings You c
56. ion English during the First Time Installation use the PIN that you have defined IMPORTANT Note 1 ALL the data stored on the USB storage device will be lost and then the disk format will be converted to FAT 32 if you activate this feature Ensure that you backed up important recordings or data in the device before you format it Note 2 The USB storage device will not work on other media players if formatted on the TV eee Setting Date Time Configuring Date Time Settings You can configure date time preferences by using this menu screen e Select Date Time in the Settings menu to configure Date Time settings Press OK button Date Time Settings Date Time Time Settings Mode Time Zone gt Mangen xx Bak MENU DERIN Use Up or Down button to highlight the Time Settings Mode It can be set to Auto or Manual When Auto is selected Date Time and Time Zone options will not be available to be set If Manual option is selected as the Time Zone can be altered Press Up or Down button to select Time Zone Use Left or Right button to change the Time Zone between GMT 12 or GMT 12 Date Time on the top of the menu list will then change according to the selected Time Zone Note For countries without Digital channels only the Date and Time option will be displayed Source Settings Configuring Source Settings You can enable or disable selected source options The TV will not switch to the
57. itle Time Correction lump Play gt button Start the video playback Stop Ill button Stop the video playback Pause button Pause the video playback Rewind 4d button Goes backward Forward PP button Goes forward Previous Next Left Right buttons Plays the previous next file Subtitle Audio LANG DMI button Set Subtitle Audio Green Jumps to the selected time Ret Back Back to file list Yellow Open subtitle time correction menu Subtitle Time Correction Offset 1 Press OK to confim Press BLUE button to clear Press RET BACK button to switch back to previous menu 43 Note You can set subtitles by using LANG DI T button during the playback Selected subtitles may not be displayed correctly in some cases In order to display movie subtitles correctly you should set a subtitle language See the section Media Browser Settings for selecting movie subtitle language Recordings You can play back edit or delete previously recorded programmes stored on the USB storage device using Recordings menu To display Recordings menu Press the MENU button on the remote Select Media Browser by pressing Left or Right button and press OK Select Recordings and press OK Recordings menu will then be displayed with available recordings IMPORTANT To view the previously recorded programmes in the Recordings window you should first connect the USB storage device to
58. l equipment to be exposed to dripping or splashing or objects filled with liquids DON T place hot objects or naked flame sources such as lighted candles or nightlights on or close to equipment High temperatures can melt plastic and lead to fires DON T use makeshift stands and use the stand manufacturers supplied screws DON T leave equipment switched on when it is unattend ed unless it is specifically stated that it is designed for unattended operation or has a standby mode Switch off by withdrawing the plug make sure your family know how to do this Special arrangements may need to be made for people with disabilities DON T continue to operate the equipment if you are in any doubt about it working normally or it is damaged in any way switch off withdraw the mains plug and consult your dealer WARNING excessive sound pressure from earphones or headphones can cause hearing loss ABOVE ALL NEVER let anyone especially children push or hit the screen push anything into holes slots or any other openings in the case NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OP ERABLE Note Interactive video games that involve shooting a gun type of joystick at the on screen target may not work with this TV The illustrations and the OSD in this operation manual are for exp
59. lanation purposes and may vary slightly from the actual operations 4 Installation and Important Information Where to install Sturdy tie as short rf as possible Button and stand style P Clip is dependent on model P Clip position on TV is dependent on model Locate the television away from direct sunlight and strong lights Soft indirect lighting is recommended for comfortable viewing Use curtains or blinds to prevent direct sunlight falling on the screen Place the TV on a stable level surface that can support the weight of the TV In order to maintain stability and prevent it falling over its recommended to secure the TV to a wall using a sturdy tie on the back of the stand The LCD display panels are manufactured using an extremely high level of precision technology however sometimes some parts of the screen may be missing picture elements or have luminous spots This is not a sign of a malfunction Make sure the television is located in a position where it cannot be pushed or hit by objects as pressure will break or damage the screen Also please ensure that small items are not inserted into slots or openings in the case Avoid using chemicals such as air refreshers cleaning agents etc on or near the TV pedestal Studies indicate that plastics may weaken and crack over time from the combination effects of chemical agents and mechanical stress such as weight of TV
60. n screen until the button is pressed again To display an initial page Press RET BACK to access an initial page The one displayed is dependant on the broadcaster English 46 Appendix A PC Input Typical Display Modes The following table is an illustration of some of the typical video display modes Some due to the display native resolution are scaled automatically to enable correct image to be displayed Your TV may not support different resolutions Supported resolution modes are listed below If you switch your PC to an unsupported mode a warning OSD will appear on the screen 640x480 800x600 31 1280x960 6ohz KK oore 7 17 English 47 Appendix B AV and HDMI Signal Compatibility Input Signal Types Supported Available rv EXT NTSC 60 SCART RGB 50 60 SECAM PAL 50 60 Side AV NTSC 60 SECAM 4801 60Hz 480P 576l 576P YPbPr 720P 720P 10801 10801 4801 480P 5761 576P 720P 720P 10801 10801 Note In some cases a signal on the LCD TV may not be displayed properly The problem may be an inconsistency with standards from the source equipment DVD Set top box etc If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment o 0 0 0 0 0 0 0 English 48 Appendix C PIN Information Before connecting any external equipment turn off all main power switches If there is no swit
61. ncy 858 00 MHz Search Step 8000 Enter search frequency Te Start search You can set Start Stop Frequencies and Search Step as desired When finished press OK button to start the search If you select Aerial option from the Search Type screen the television will search for broadcasts 10 The Auto tuning screen will appear and the television will start to search for available stations The progress bar will move along the line You must allow the television to complete the search screen Antenna Type menu will be displayed There are three types of antenna selection You can select Antenna type as Direct Unicable or DiSEqC Direct If you have a single receiver and a direct satellite dish select this antenna type After selecting Direct another menu screen will be displayed Select an available satellite and press OK to scan for services Unicable If you have multiple receivers and a unicable system select this antenna type Press OK to continue Configure settings by following instructions on the screen Press OK to scan for services DiSEqC switch If you have multiple satellite dishes and a DiSEqC switch select this antenna type After selecting DiSEqC switch another menu screen will be displayed You can set four DiSEqC options if available Press GREEN button to scan all satellites or press YELLOW button to scan only the highlighted satellite To save and exit press OK button SatcoDX Preset List
62. nect to the Toshiba Portal or to access photo video and audio files that are stored on a media server connected to the network and play display them on the TV Wired connection Connect the TV to the modem router via a LAN cable not supplied Select Network Type as Wired De vice in Network Settings menu and then highlight Network Press Left or Right buttons and set as Enabled to connect TOSHIBA A LAN input on the TV LAN Cable modem router E ie LAN Cable a 7 Broadband he ISP connection Wireless connection To connect the TV to the home network wirelessly just select Network Type as Wireless Device in Network Settings menu and then highlight Network Press Left or Right buttons and set as Enabled to connect The TV will search for available networks Select the desired network and press OK The TV has a built in WLAN system and has no need for additional devices to connect to a wireless network TV Built In WLAN system DY seer access point LAN Cable 4 Broadband et ISP connection Performance depends on many factors conditions and variables including distance from acces po int AP volume of network traffic building materials and construction operating system used mix of wi reless products used interference and other adverse conditions Please refer to Network Settings section to configur
63. ng the First Time Installation or changed the default PIN later from the Set PIN option under the Parental Settings menu use the PIN that you have defined e Press OK button when the desired channel is highlighted to lock unlock the channel Lock symbol will be displayed next to the selected channel English 22 Viewing Info Banner Electronic Programme Guide Viewing Info Banner e Press GREEN button to view the next day e Press INFO button The information screen will Press YELLOW button for zooming to a programme appear giving details of the channel and programme Press BLUE button to display filtering options currently being viewed e Press SUBTITLE button to sort channels by a genre e For information on a highlighted programme press lt gt pa 2 I H45 DVB T INFO Ga button e Whenever you change channel the TV displays the Use numeric buttons for quickly selecting a broadcast picture along with an information banner at broadcast the bottom of the screen This will remain on the screen for a few seconds Use the navigation buttons to highlight a programme and press OK button to display Event Options e If the selected channel is locked you must enter the menu The following options are available correct four numeric code to view the channel Enter Select Channel Using this option you can switch PIN will be displayed on the screen in such a case gt to the selected
64. ng to clear channels stored English 20 General Operation Stereo and Bilingual Transmissions If stereo or dual language broadcasts are transmitted the word Stereo or Dual will appear on the screen each time positions are changed disappearing after a few seconds If the broadcast is not in stereo the word Mono will appear Stereo Press LANG ODI 1 to select Stereo or Mono Bilingual Bilingual transmissions are rare If they are trans mitted the word Dual will be displayed Choose the required programme number and if the word Dual appears press LANG OO 1 to select Dual I Dual II or Mono For DTV broadcasts To view current language and for changing to an alternative language if available press LANG DI button Available options will be listed Displaying Subtitles In digital broadcasts this feature will show subtitles on the screen in the selected language provided they are being broadcast Press SUBTITLE button to turn the subtitles on Press SUBTITLE button again to turn the subtitles off Viewing Main Menu Press or A buttons on the TV at the same time to view main menu Press MENU button on the remote control to view main menu Controlling Volume and Muting Sound Volume Press lt 1 or lt 1 button on the remote control to adjust the volume Sound Mute Press pg button once to turn the sound off and again to cancel Selecting Programme Positions
65. nsumption approx 58 kWh Standby Power Consumption approx Screen Resolution pixels lt 0 50 W 1920 x 1080 Display 16 9 Sound Output at 10 distortion 2x6 Power Consumption Model approx 65W Weight TV with stand 8 50 kg Gross weight 11 0 kg TV without stand 7 00 kg Tested in accordance with IEC 62087 BD in default settings Energy consumption 58 kWh per year based on the power consumption of the television operating 4 hours per day for 365 days The actual energy consumption will depend on how the television is used Specification is subject to change without notice A mm B mm C mm D mm E mm F mm G mm 32L344 DG 745 24 454 52 2135 103 61 497 58 200 100 English 51 License Information e The terms HDMI and High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries HOM e DVB is a registered trademark of the DVB Project e 1 EIA CEA 861 D compliance covers the transmission of uncompressed digital video with high bandwidth digital content protection which is being standardized for reception of high definition video signals Because this is an evolving technology it is possible that some devices may not operate properly with the television e YouTube and the YouTube logo are trademarks of Google Inc MP3 licence l
66. o accept and display VGA 480i 480p 576i 576p and 720p signals PC format signals will also be displayed Note Although this TV is able to connect to HDMI equipment it is possible that some equipment may not operate correctly When connecting a device via the Side AV input you must use the supplied connection cable to enable connection When connecting a device via YPbPr input you must use the supplied connection cable to enable connection LAN Input is used to connect the TV to your home network Awide variety of external equipment can be connected to the TV therefore the relevant owner s manuals for all additional equipment must be referred to for exact instructions If the TV automatically switches over to monitor external equipment return to normal TV by pressing the desired programme position button To recall external equipment press SOURCE button repeatedly to switch between sources Regardless of source s property audio output from the DIG ITAL AUDIO socket cannot be copied English 9 Connecting an HDMI or DVI Device to the HDMI Input The HDMI inputs on your TV receive digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI Digital Visual Interface source device These inputs are designed to accept HDCP High Bandwidth Digital Content Protection programme material in digital form from EIA CEA 861 D compliant 1 consum
67. of these options Normal Warm or Cool English 26 Configuring Picture Settings continued Picture Zoom Sets the picture size to Auto Full 16 9 Subtitle 14 9 14 9 Zoom 4 3 or Cinema Press Left or Right button to change the setting Film Mode optional Films are recorded at a different number of frames per second to normal television programmes Press Left or Right button to set this feature to Auto or Off Turn this feature to Auto when you are watching films to see the fast motion scenes clearly Skin Tone Adjust the desired skin tone Colour Shift Adjust the desired colour tone RGB Gain Press OK button to edit RGB gain You can configure the colour temperature values using the RGB Gain feature HDMI True Black optional While watching from HDMI source this feature will be visible in the Advanced Settings menu You can use this feature to enhance blackness in the picture Set this feature to On to activate Note HDMI True Black On Off feature functions only when the HDMI device output is set to RGB Reset This feature allows you to reset the current picture settings to the default values Press MENU button and select Picture by using Left or Right button Press Up or Down button to select Reset and press OK button Note The reset function does not reset the settings for Mode Noise Reduction Colour Temp Picture Zoom and HDMI True Black English 2 7 Changing Picture Format Press
68. ol page IMPORTANT Ensure that the aerial cable and or Satellite dish is connected and a Common Interface module is not inserted before switching on the TV for the first time installation 1 Connect the mains plug and switch the TV on using the button If the TV does not switch on press any numbered or button on the remote control then the language selection menu will be displayed This screen will appear the first time that the TV is switched on and each time the TV is reset First time installation Welcome please select your language English Bienvenue Veuillez choisir une langue Francais Willkommen Wahlen Sie bitte Ihre Sprache aus Deutsch Benvenuti Selezionate la vostra lingua Italiano Bienvenido seleccione un idioma Espanol Hos geldiniz l tfen dil se imini yap n z T rk e Dobrodo li izberite va jezik Slovenski V lkommen v lj ditt spr k Svenska dv z lj k k rj k v lassza ki a nyelvet Magyar Bem vindo favor selecionar seu idioma Portugu s Tervetuloa valitse kielesi Suomi 2 By pressing Up or Down button highlight the language you want to set and press OK button The following screen will be displayed next First time installation Welcome Germany Digital only Country Search Type Teletext Language West Scan Encrypted Channels Yes Select Setting lt gt Choose your country T Start search 3 By pressing Left or Right button select the country you want to
69. old place to a warm place When you use the unit in a room where the heater was just turned on When you use the unit in an area where cold air from an air conditioner directly hits the unit When you use the unit in a humid place e Never use the unit when moisture condensation could occur e Using the unit when moisture condensation exists may damage its own internal parts Allow two or three hours the unit will warm up and moisture will be evaporated before switching on English 6 Fitting or Removing the pedestal stand Fitting or Removing the pedestal stand 1 Carefully lay the front of the unit face down on a flat cushioned surface with the stand hanging over the edge 2 To fit the stand use the screws supplied or 3 Remove the screws fixing the pedestal stand 4 After the screws are removed hold the pedestal stand in place then remove the pedestal stand and the plastic moulding from the TV Note Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel ar 4 For 32L344 DG model When using a Wall Bracket Please use a wall bracket appropriate for the size and weight of the LCD TV and two people are required for the installation 1 Unplug and remove any cables and or other component connectors from the rear of the TV 2 Carefully lay the front of the unit face down on a flat cushioned surface such as a quilt o
70. on and press OK Select the media type to be listed and press OK lf there is more than one media source available a list of devices and servers will be displayed Highlight the device or server from the list and press OK Auto Start When you plug a USB storage device the following menu will be displayed You can play or view music video and picture files from an USB storage device connected to the USB port Moreover you can also play or view music video and picture files from a media server on the same network To display the files with folders select Settings tab and change View Style to Folder So the selected type of files in the selected folder will be displayed Additionally the All tab will be added to the main Media Browser menu To list all available music video and picture files in the selected folder at once select All tab and press OK button If View Style is set to Flat all selected type of files will be listed If for instance Video is selected in the main Media Browser menu TV will search the source for all video files and list them Note Some USB compliant devices may not be supported If the USB storage device is not recognized after power off on or First Time Installation plug the USB device out and power off on the TV set Then plug it in again e Do not use a USB Hub English e You must obtain any required permission from copyright owners to use copyright content Toshiba canno
71. ork Settings menu will be displayed Please refer to Connecting a Home Network and Network Settings sections to configure a wired or a wireless connection After the settings are completed press OK button to continue 7 Afterwards the following OSD will be displayed on the screen Please Select Digital Search Type Cable Satellite PE 8 If you select Cable option a confirmation screen will be displayed If you want to search for available networks select YES to proceed The following screen will be displayed 15 Initial Installation continued Automatic channel scan Retune Please wait This wi SESS es Network channel scan l take a few minutes Scanning digital channels VHF 6 Network Other Frequency 106 00 MHz Network ID None Search Step 8000 gt ange Vae OG mew Tt menu Cancel scan You can select Network Frequency Network ID and Search Step from this screen For highlighting lines you see use Up or Down button Note You can press MENU button to cancel 11 If you select Satellite option from the Search Type 9 You can set Search Step as 8000 kHz or 1000 kHz If you select 1000 kHz the TV will perform search process in a detailed way Searching duration will thus increase accordingly When finished press OK button to start automatic search If you select NO the following screen will be displayed Automatic channel scan Retune Start Frequency Stop Freque
72. ource selection 16 Programme recording MY BUTTON 1 amp MY BUTTON 2 These buttons may have default functions depending on the model However you can set a special function to these buttons by pressing on them for five seconds when on a desired source channel or link A confirmation message will be displayed on the screen Now the selected MY BUTTON is associated with the selected function Note that if you perform first time installation MY BUTTON 1 amp 2 will return to their default function Inserting Batteries and Effective Range of the Remote Control Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round Suitable battery types for this remote are AAA IEC RO3 1 5V Do not combine a used old battery with a new one or mix battery types Remove exhausted batteries immediately to prevent acid from leaking into the battery compartment Dispose of them in a designated disposal area Warning Batteries must not be exposed to excessive heat such as sunshine fire or the like The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the IR receiver If the operating range becomes reduced the batteries may need replacing English 8 Connecting External Equipment Before connecting any external equipment remove the mains plug from the wall socket TOSHIBA LAN Input 300m
73. pecific encryption system to view which may not be available in certain countries e DVB is a registered trademark of the DVB Project The DVB logo indicates that the product is compliant with European Digital Broadcasting IMPORTANT INFORMATION TV Installation e Do not stand the televisions on cloth or other materials placed between the television and supporting furniture e Educating children about the dangers of climbing on furniture to reach the television or its controls e Always hold the plug when disconnecting the unit from the socket outlet Do not pull on flex The flex can become damaged and cause a short circuit e Use a soft dry cloth to clean the unit e Set up unit so that no one will trip over the flex e If you intend to wall mount the unit contact the shop where you purchased the unit for advice and leave the installation work to professionals Improper installation can cause damage and or injuries e To protect the unit during a thunder storm unplug the AC power cord and disconnect the aerial cable and satellite decoder systems etc Caution Do not touch the aerial or satellite connector e The unit becomes warm when in operation Do not place any covers or blankets on the unit in order to prevent overheating e The ventilation holes should not be blocked Do not set up near radiators Do not place in direct sunshine e Moisture condensation occurs in the following situations When you move the unit from a c
74. perating instructions of the related device CEC operation is available if a CEC device is present The CEC osd menu is accessed through the QUICK button on the remote The CEC osd menu will only be displayed if a CEC product is connected CEC Auto Power On This function allows the connected HDMI CEC compatible device to turn on the TV and switch to its input source automatically Press Left or Right button to enable or disable the feature Note The audio device should support System Audio Control feature and CEC option should be set as Enabled 3f Network Settings Portal Internet Browser and YouTube Configuring Network Settings Press the MENU button to open the main TV menu Highlight Settings by pressing Left or Right buttons and press OK to enter Highlight Network Settings and press OK While Network Type is highlighted press Left or Right buttons to select connection type Then highlight Network Press Left or Right buttons and set as Enabled to enable the connection If you are going to make a wireless connection for the first time press YELLOW button to search for available networks If there is no presaved wireless profile on the TV the TV will also search for available networks when set as Enabled Choose a network from the list and press OK You may have to enter a password if the selected network is password protec ted Enter the password and choose OK on the virtual keyboard and press OK Wait a whil
75. r Dual Il mode only if the selected channel supports that mode AVL Sometimes there can be large changes in volume when switching from a DTV 5 1ch to a DTV 2ch an ATV channel or an external input Using the AVL feature reduces these volume differences e Press Up or Down to highlight AVL Press Left or Right button to set AVL as On or Off Headphone Lineout Set this option as Lineout when an external amplifier is connected to the TV using the headphone jack If headphones are connected to the TV set this option as Headphone Dynamic Bass Dynamic Bass is used to increase bass effect of the TV set Select Dynamic Bass using Up or Down buttons and press Left or Right button to set Surround Sound In the Sound menu press Up or Down to highlight Surround Sound Press Left or Right button to set Surround Sound as On or Off Digital Out This setting enables you to set Digital Out preference as Compressed or PCM You should set this feature in accordance with the received broadcast s content Select Digital Out using Up or Down button and then use Left or Right button to set English 30 Settings Menu Operation Conditional Access Configuring Your TV s Settings Detailed settings can be configured to suit your personal preferences Viewing Settings Menu Press MENU button and select Settings by using Left or Right button Press OK button to view Settings menu Settings Language Parental Timers Recordin
76. r blanket 3 Follow the instructions provided with your wall bracket Before proceeding make sure the appropriate bracket s are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket English 7 The Remote Control Simple at a glance reference of the remote control The supplied type is model dependant D CD fol ae 1 Standby 17 Pause Timeshift recording 1 i 31 2 Numeric buttons 18 Play 2 f 1 11 2 113 3 TV AV Channel list 19 Subtitle on off in Media Switches among broadcast Browser mode and in DVB iS types channels 4 Mute 20 Stop 5 Volume Up Down 21 Rapid advance 4 6 Menu on off 22 Image size 7 Navigation buttons 23 My button 2 Up Down Left Right 24 Teletext Mix in TXT 8 Okay Confirm Hold in mode TXT mode Channel List 25 Electronic programme V 9 Return Index page in guide in DVB channels TXT mode 26 Exit o l E 2 Metia Eo 27 Internet portal een 28 Info Reveal in TXT I My button 1 mode 11 E m 42 413 F 44 HE 46 47 GUIDE 7 m gt x te HD 44 Mono Stereo Dual I ll Page up p Current Language Programme Up Page sverm ea B down in DVB channels u 7 21 15 30 Previous programme Rapid reverse l o TOSHIBA CT 8035 13 Coloured buttons 29 Programme Down 31 AV S
77. r two or more individual events at the same time interval Thu 07 06 21 00 22 00 23 00 16 RaiNotizie24 17 Rai Edu1 18 Rai Gulp j i 22 RAI Sport pi Press SWAP button for displaying current 30 SAT2000 programmes 34 Rete4 1 35 CanaleS 1 Press TEXT button to display searching options r Press REC button to start recording the selected 47 Rai Test HD programme If the programme is going to be broadcasted at a future time it will be marked with a red frame and added to Timers list to be recorded If you select and press REC button again the programme will be removed from the list e For details of other programmes currently available press navigation buttons to scroll up and down or scroll left right through the list As channels are selected details of the programme currently being broadcast will appear e Press RED button to view the previous day English 23 Language Selection Language Settings Using this menu you can adjust the preferred language settings Some features may not be available e Press MENU button and select Settings by using Left or Right button e Select Language and press OK to view this menu Select the desired language by using Left or Right button Press the MENU button on the remote control to exit Language Settings Preferred Audio English Subtitle English Teletext West Guide English Current Audio None Subtitle None Navigate lt
78. reen will be displayed Select Yes if you want to move the channel and press OK e Selected channel is now moved Deleting a Channel You can press GREEN button to tag untag all channels YELLOW button to tag untag channel e Select the channel that you want to delete and select Delete option by using Left or Right button Press OK button to continue e A warning screen will appear Select Yes to delete select No to cancel Press OK button to continue Renaming a Channel e Select the channel that you want to rename and select Edit Name option by using Left or Right button Press OK button to continue e Pressing Left or Right button moves to the previous next character Pressing Up or Down button changes the current character Pressing the numeric buttons 0 9 replaces the highlighted character with the characters printed above the button one by one as the button is pressed e When finished press OK button to save Press MENU or BACK to cancel Locking a Channel You can press GREEN button to tag untag all channels YELLOW button to tag untag a single channel e Select the channel that you want to lock by using Up or Down button e Select Lock option by using Left or Right button Press OK button to continue You will be asked to enter parental control PIN Enter the PIN number Note Default PIN can be set to 0000 or 1234 If you have defined the PIN is requested depending on the country selection duri
79. ress Left or Right button to enable or disable English Power Up Mode This setting configures the power up mode preference Standby The TV always powers up in Standby mode Last State The TV always switches on with the last selected channel source Virtual Remote This function allows to control the TV via a wireless handheld device Enable the Virtual Remote feature by pressing Left or Right button e Download a virtual remote controller application from the server of your mobile device application provider e Connect the TV and the mobile device to the same network Refer to the Network Settings section to make the connection properly This feature may not be supported on all mobile devices CEC This function allows to control the connected HDMI CEC compatible devices with the remote control of the TV Press Left or Right button to enable the feature Select the HDMI input of the connected device from the source menu The TV remote is automatically able to control most functions of the device navigate menus change channels launch the disc etc To terminate this operation and control the TV via the remote again press QUICK button on the remote highlight the CEC RC Passthrough and set as Off by pressing Left or Right button To control the CEC device again set the CEC RC Passthrough option as On It is also possible to disable this feature in the configuration menu of the connected HDMI device Refer to the o
80. ress Up or Down button to select an item e Use Left or Right button to set an option or press OK button to view a sub menu Menu Timeout To set a specific display timeout for menu screens set a value for this option In the Other Settings menu select Menu Timeout and choose 15 sec 30 sec 60 sec or Off using Left or Right button Scan Encrypted Channels When this setting is set as Yes search process will locate the encrypted channels as well If it is set as No manually encrypted channels will not be located while in automatic search or manual search Scan Encrypted Channel feature will always be Yes after performing first time installation In the Other Settings menu use Up or Down button to select Scan Encrypted Channels e Press Left or Right button to set this function as Yes or No Hbb TV If you set this option to On HbbTV services such as catch up services video on demand EPG games will be available if the broadcast supports You can disable this feature by setting this option to Off Blue Background lf the signal is weak or absent the TV will automatically change to a blue screen To enable this set Blue Background to On e In the Other Settings menu select Blue Background and choose On or Off using Left or Right button Software Upgrade This feature helps to keep your TV updated It works automatically and searches for new information when available Upgrade options Enabled Sel
81. s the colour value adjusting the colours Press Left or Right button to adjust the colour Power Save Mode Enables or disables the power save mode Press Left or Right button to set as Disabled Eco or to turn the screen off See the section Environmental Information in this manual for further information on Power Save Mode Note Picture mode will be set to Dynamic automatically if the Power Save Mode is set to Disabled Backlight This setting controls the backlight level and it can be set to Auto Low Medium and High Note The backlight function will be inactive if Power Save Mode is set to Eco or picture mode is set to Game Noise Reduction Sometimes some words or picture elements may become distorted or pixelated Using the Noise Reduction feature reduces this effect by smoothing out the edges Press Left or Right button to set noise reduction level Advanced Settings Some additional controls in the picture menu are grouped under the title Advanced Settings To view or change first highlight Advance Settings and press OK button to view Advanced Settings menu controls are as the following Dynamic Contrast You can change contrast rate by using dynamic contrast function Dynamic contrast can be set to one of these options Low Medium High or Off Colour Temp Colour Temperature increases the warmth or coolness of the picture by increasing the red or blue tint Colour temperature can be set to one
82. se Left or Right button to set an item e Press MENU button to exit Volume Select Volume using Up or Down button and then use Left or Right button to set volume level Equalizer Only for speaker You can customize current sound mode settings Select the appropriate mode in accordance with the installation location of the TV and adjust the equalizer on screen as desired Press OK button to view equalizer submenu Equalizer Settings 120Hz li 4 500Hz li 2 1 5KHz li 2 5 O0KHz li 3 10 0KHz lil 5 In equalizer menu the preset can be changed to Music Movie Speech Flat Classic and User Press the MENU button to return to the previous menu Note Equalizer menu settings can be changed manually only when the Equalizer Mode is in User Balance Only for speaker This setting is used for emphasizing left or right speaker balance e Press Left or Right button to change the level of the balance Balance level can be adjusted between 31 and 31 Headphone This setting is used to set the sound output when headphones are connected e Press Up or Down button to select Headphone e Press Right button to increase headphone volume level Press Left button to decrease headphone volume level Headphone volume level can be adjusted between 0 and 63 Sound Mode This setting is used to set the Sound Mode Higlight Sound Mode by using Up or Down button Press Left or Right button to set You can select Mono Stereo Dual I o
83. sumption but will still draw some power Standby LED IR receiver Using the Remote Control Press the MENU button on the remote control to see the menus The main menu appears as a group of icons each for a menu option Press the Left or Right button to select a topic In sub menu screen mode the menu appears as a list Press the Up or Down button to select a topic To use the options press the Up and Down buttons on the remote control to move up and down through them and OK Left or Right buttons to select the required choice Follow the on screen instructions The functions of each menu are described in detail throughout the manual Using the Controls on the TV Using the control buttons on the Back of the TV e To alter the volume press or A e To alter the programme position press Y 4 buttons on the Back of the TV e Press A buttons at the same to view main menu and use V 4 buttons to navigate and A to change value To select an external input press button until the appro priate input source is selected Please always refer to the owner s manual of the equipment to be connected for full details English 14 Initial Installation Before switching on the TV put your decoder and media recorder to Standby if they are connected and ensure the aerial cable and or Satellite dish is connected to your TV To set up the TV use the buttons on the remote control as detailed on The Remote Contr
84. t Language from the Settings menu e Highlight Teletext in the Language Settings menu and press Left or Right button to choose the required language region After the Teletext language is selected press MENU button to exit Using Text Button TEXT e To view text services press TEXT Press TEXT again to superimpose text over a normal broadcast picture e Press TEXT again to return to normal viewing e Programmes cannot be changed until text is cancelled e The first text page shown will be the initial page e Any text page can be accessed by entering the 3 digit page number using the numbered buttons Press P W A or Up Down buttons to go to the next previous page e Four coloured titles will appear at the base of the screen To access one of the four given subjects press the relevant coloured button on the remote control e For further information on your particular text system s see the broadcast text index page or consult your local Toshiba dealer Below is a guide to the functions of the remote control text buttons Acessing Sub Pages If a text page has sub pages press Left Right buttons or enter the sub page number 0001 0002 0003 etc to access Revealing Concealed Text To discover the solutions on quiz and joke pages press the INFO button Holding a Page At times it is convenient to hold a page of text Press OK and HOLD will appear in the top left of the screen The page will be held o
85. t and does not grant such permission e Depending on the file size and amount in your USB storage device or media server it may take some time for loading to view Amessage will be displayed on the screen when loading files from the USB device or media server e Only limited types of USB devices are supported Therefore it is suggested not to use USB for playing Media Player e Non supported characters will be replaced with a square o 41 Using Media Browser continued This TV allows you to enjoy photo music or video files stored on a USB device or media server Playing MP3 Files To play mp3 files from a USB memory or media server you can use this menu screen Music Media Browser No Title Artist Album 0002 Ayda Mosharraf isyan 0003 Badem amp zlem Tekin K 0004 De i mem Badem Ve Oyk 0005 Karmate Kara Duman 2 0006 Karmate amp evval Sam N 0007 Kazim Koyuncu ve Ilkay A 0008 Levthand Cadillac Track 04 56 cnini 0009 Nelly Furtado Waiting Fo 0010 Somebody That I Used To vi GP a0 lt SN 26 no OD Toggle View Style Change Media Loop Shuffle e V A Navigate menu e Play gt button Start to play all files listed beginning with the selected one e Stop fl button Stop the playback e Pause f button Pause Resume the playback e Red button Sort files by Title Artist or Album Note If the
86. t the cursor to Oh button and press OK Press the BACK button to close the virtual keyboard or to go to previous page in the browser Press the Vay button to turn back to portal home page English 38 Network Settings Portal Internet Browser and YouTube continued Press the EXIT button to close the portal and watch TV again NOTES e The virtual keyboard or numeric buttons on the remote which are assosiated with the letters of the alphabet can be used for entries e The browser does not support multiple tabs e Some internet pages include flash content These are not supported by the browser e The TV does not support any download processes from the web browser Using YouTube You need to configure a home network before using this feature This TV allows you to view Youtube content Press Mybutton1 H Y to connect YouTube dire ctly You can also press Fay button on the remote and launch the YouTube application on the portal to access YouTube NOTES e Depending on the network environment and use case you may experience difficulty viewing the content e It may take time for the TV to load and begin playing back the content e Service content and the interface may be changed at any time without prior notice English 39 USB Record Feature This feature is not available in all countries For the countries where this feature is available a USB connected storage device will
87. tton to set this setting Auto TV Off You can set the timeout value of auto off feature After the timeout value is reached and the TV is not operated for selected time the TV will go off Press MENU button and select Settings by using Left or Right button Press OK button to continue Use Up or Down button to select Other Settings and then press OK button Select Auto TV Off using Up or Down button Standby Search optional If the Standby Search is set to On and the TV is in standby mode the TV will look for any changes in the saved channels Press MENU button and select Settings by using Left or Right button Press OK button to continue Use Up or Down button to select Other Settings and then press OK button Select Standby Search using Up or Down button and use Left or Right button to set Bisskey Biss is a satellite signal scrambling system that is used for some broadcasts If you need to enter BISS key on a broadcast you can use Biss Key setting Highlight Biss Key and press OK to enter keys on the desired broadcast Store Mode If you set Store Mode to Enabled your TV s features will be illustrated on the top of the screen To deactivate this feature set to Disabled Media Renderer This feature allows to share play files stored in a compatible mobile device on the TV Install an appropriate software on your device and read instructions of the sharing software for more information Highlight Media Renderer and p
88. ualified personnel must repair the TV Please contact your local dealer where you have purchased this TV for further information English 13 Controlling the TV A wide variety of external equipment can be connected via the sockets located on the side and back of the TV Whilst all the necessary adjustments and controls for the TV are made using the remote control the buttons on the Back of the TV may be used for some functions Menu OSD Standby 5 AV 1 Source i Programme k Down Up Volume Q gt Down Up oe d Switching on If the standby LED is unlit check that the mains plug is con nected to the power and press the button on the back side of the television or O button on the remote control to switch the television on To put the television into Standby press 1 button on the remote control or button on the TV To view the television press again The picture may take a few seconds to appear Note The active Standby LED colour will turn to red in a few moments when the TV is switched into Standby For energy saving Turning the TV off at its mains supply or un plugging it will cut energy use to nearly zero for all TV s This is recom mended when the TV is not being used for a long time e g when on holiday Reducing the brightness of the screen will reduce energy use Note Putting the TV into standby mode will reduce energy con
89. view style displays files in selected folder CE sect Blue Bu Exit You can set your Media Browser preferences by using the Settings dialogue Press Up or Down button to highlight an item and use Left or Right button to set View Style Set default browsing mode Set as Flat to list all selected type of files stored in the USB device or media server Set as Folder to list all selected type of files in the selected folder Slideshow Interval Set slide show interval time Show Subtitle Set subtitle enabling preference Subtitle Language Set supported subtitle language Subtitle Position Set subtitle position as Up or Down Subtitle Font Size Set subtitle font size English 44 Using Media Browser continued This TV allows you to enjoy photo music or video files stored on a USB device or media server Using MENU button in Media Browser Mode Pressing MENU button while in Media Browser mode displays the following menu screen Options Sound Settings GEM Navigate Select Exit You can access Picture Sound and Settings menu options using this screen Press MENU again to exit from this screen To Close the Media Player e Press EXIT button on the remote control English 45 Analogue Only Text Services This television has a multi page text memory which takes a few moments to load Analogue Text Services Before using the text services the required language region must be chosen e Selec
90. yback Controls the permission for the playback of the programme that will be recorded There are three options available Use parental settings Disallowed and Allowed To set this option as Allowed user should enter a PIN This option is only available if the Timer Type is set to Record Default PIN can be set to 0000 or 1234 If you have defined the PIN is requested depending on the country selection during the First Time Installation use the PIN that you have defined Press OK button to save the timer Press RET BACK button to cancel Editing a Timer e Select the timer you want to edit by pressing Up or Down button e Press GREEN button to edit e When finished with editing press OK button to save You can press RET BACK button to cancel Deleting a Timer e Select the timer you want to delete by pressing Up or Down button e Press RED button e Select Yes by using Left or Right button and press OK to delete the timer Select No to cancel English 32 Recording Configuration This feature is not available in all countries For the countries where this feature is available a USB connected storage device will be required Recording Configuration You can configure recording preferences using this menu Press MENU button and select Settings by using Left or Right button Then select Recording Configuration item in the sub menu and press OK button The following menu will be displayed Recordin

Toshiba L3448/32 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents