Timex Clock 75328T User's Manual
Contents
1. until the correct year is displayed to confirm e The MONTH will flash Press the UP A ARROW repeatedly Press SET until the correct month is displayed to confirm f The DATE will flash Press the UP A ARROW repeatedly Press SET until the correct date is displayed to confirm DAY OF THE WEEK AND MOON PHASE WILL UPDATE AUTOMATICALLY AS YOU SET THE DATE e The F will flash Press the UP A ARROW to change Press SET between F and C to confirm2. ALKALINE ONLY BATTERIES AS SHOWN HERE 2 Initial Setup once the batteries are installed the clock will power up The display will appear as follows Atomic Clock Time Zone Indicator Defaults to Eastern Standard Time Outdoor Temperature with Trend Arrow Defaults to Fahrenheit Day Date Indoor Temperature Calendar with Trend Arrow Moon Phase Outdoor Temperature Sensor Indicator Signal Indicator The clock will initially set itself to the correct time and date defaulting to EST Eastern Standard Time It will also begin displaying the temperatures The clock will begin searching for the Atomic signal Note The clock will adjust for daylight saving time even if it is unable to receive the WWVB signal After the clock acquires the Atomic signal this may take 24 48 hours the time date and daylight saving time changes will update automatically giving you maintenance free operation and accuracy to the split second Product Specifications Indoor Temp Range 32 F to 140 F 0 C to 60 C NOTE indoor unit should not be placed in conditions Outdoor Temp Range 40 F to 158 F 40 C to 70 C under 32 F Atomic Clock Frequency WWVB 60Khz 433Mhz Radio Signal Synchronizes daily 100 30m Radio Frequency Transmission Range Power Requirements 8 AA Alkaline Batteries BATTERY SAFETY Clean the battery contacts and also those of the device prior to battery installation Remove batter
3. Please DO NOT return product to the retail store For technical assistance amp and product return information please call customer care 877 221 1252 i gt Monday Friday 8 00 a m 4 30 p m CST www chaneyinstrument com Timex is a registered trademark of Timex Corporation in the U S and other countries Manufactured and serviced by Chaney Instrument Co Lake Geneva WI 53147 www chaneyinstrument com 2010 Chaney Instrument Co INST 75328T 070110 This device complies with part 15 of the FCC rules and RSS 210 of IC rules subject to the following two conditions 1 This device may NOT cause harmful interference and 2 This device must accept any interference received including interference that may Cause undesired operation WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However There is no guarantee that interference will not occur in a particular inst
4. allation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and the receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help NOTE The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment Such modifications could void the user authority to operate the equipment Patent numbers 5 978 738 6 076 044 6 597 990 Atomic Digital Clock with indoor outdoor temperature calendar and moon phase W O B BE 45167451 USER GUIDE Package Contents 1 Atomic Digital Clock 1 Wireless Outdoor Temperature Sensor 1 User Guide What You ll Need 8 AA Batteries NOTE A clear protective film is applied to the LCD at the factory that must be removed prior to using this product Locate the clear tab and simply peel to remove Thank you for purchasing this quality TIMEX brand product Please read these instructions COMPLETELY to fully understand the features and functions of this clock and to enjoy its benefits Make sure to keep this guide hand
5. ch other Make sure units are placed at least 3 feet from other electronic devices or appliances that may interfere with the wireless communication i e TV s microwaves computers etc You may need to reset both units by removing and re installing the batteries Check to make sure the batteries are installed correctly Use only fresh STANDARD AA batteries not generic or extra strength Make certain that the batteries are FRESH If the expiration date on your batteries is less than 6 years away they may not contain a full charge and can be weak 3 Choosing Your Time Zone 1 Press and HOLD the SET button until you see the selection of seven time zones flashing on the LCD screen then release 2 Press the UP A ARROW repeatedly until you reach your time zone then press SET In the event you wish to manually change the clock settings please use the instructions on page 5 Battery Choice amp Temperature Range Extended periods of extreme cold temperatures below 4 F 20 C can cause alkaline batteries to function improperly This may cause the outdoor wireless sensor to stop transmitting temperature readings We recommend using lithium batteries in extreme low temperature conditions to ensure continued operation of the outdoor sensor LITHIUM BATTERIES ALKALINE BATTERIES 70 C 1580F EU coc 158 F For the digital atomic clock we recommend only alkaline batteries Placement o
6. d charges This warranty will not be breached and Chaney will give no credit for products it manufactures which shall have received normal wear and tear been damaged tampered abused improperly installed damaged in shipping or repaired or altered by others than authorized representatives of Chaney TROUBLESHOOTING PROBLEM POSSIBLE SOLUTIONS Poor Atomic Clock Reception if No bars Poor Outdoor Sensor Reception No bars T Bad Temperature Reception blank or flashing temperature Display Not Working Relocate or reposition the clock making sure the backside of the unit is facing in a direction toward Colorado from your location Heavy stone or metal walls can obstruct the signal and disrupt reception Place the clock at least 3 feet 0 91 m from other electronic devices i e TV s microwaves computers etc that can interfere with wireless signals You may be experiencing interference from other wireless devices using the same radio frequency channel Relocate the main unit and or the wireless sensor Both units must be within 100 feet 30m of each other Make sure units are placed at least 3 feet from other electronic devices or appliances that may interfere with the wireless communication i e TV s microwaves computers etc You may need to reset both units by removing and re installing the batteries Relocate the main unit and or the wireless sensor Both units must be within 100 feet 30m of ea
7. f the Clock Place the clock in an area free of dirt and dust To help ensure an accurate indoor temperature measurement be sure to place the main unit out of direct sunlight and away from any heat sources or vents in your home This clock may be hung on a wall using the integrated wall hanging hole or you may place the unit on a tabletop or other flat surface using the swing out stands Placement of the Outdoor Sensor The wireless temperature sensor MUST BE PLACED OUTDOORS to capture and relay the outdoor temperature to the clock display unit You may place your wireless temperature sensor outside up to 100 feet 30m from the clock as shown The sensor is water resistant and is designed for outdoor use However to extend the life of the product place it in an area protected from harsh weather elements To ensure an accurate temperature reading be sure the sensor is out of direct sunlight and away from any heat sources 100 Feet Wireless Signal Reception Icons The main unit has a signal reception icon near the outdoor temperature display area If there are a low number of bars present you may experience no temperature display or inaccuracy In either case you may need to relocate one of both of the units If most or all 4 of the bars are present wireless reception is good and no action is required I i mn mi mil NO EE OON Reception Reception SETTING THE CLOCK MANUALLY U
8. ies from equipment which is not to be used for an extended period of time Follow the polarity diagram in the battery compartment Promptly remove dead batteries from the device Dispose of used batteries properly Only batteries of the same or equivalent type as recommended are to be used DO NOT incinerate used batteries DO NOT dispose of batteries in fire as batteries may explode or leak DO NOT mix old and new batteries or types of batteries alkaline standard DO NOT use rechargeable batteries DO NOT recharge non rechargeable batteries DO NOT short circuit the supply terminals PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS LIMITED ONE YEAR WARRANTY Chaney Instrument Company warrants that all products it manufactures to be of good material and workmanship and to be free of defects if properly installed and operated for a period of one year from date of purchase REMEDY FOR BREACH OF THIS WARRANTY IS EXPRESSLY LIMITED TO REPAIR OR REPLACEMENT OF DEFECTIVE ITEMS Any product which under normal use and service is proven to breach the warranty contained herein within ONE YEAR from date of sale will upon examination by Chaney and at its sole option be repaired or replaced by Chaney In all cases transportation costs and charges for returned goods shall be paid for by the purchaser Chaney hereby disclaims all responsibility for such transportation costs an
9. p Arrow Down Arrow Set to confirm manual settings Back of Clock 1 SETTING YOUR TIME ZONE a Press and HOLD the SET button until you see the selection of seven time zones Then RELEASE b Press the UP A ARROW repeatedly until you reach your time zone then press SET and release 2 TURNING ATOMIC CLOCK FEATURE ON OFF NOTE You do NOT need to turn off the atomic clock to set the time manually Once the clock receives the signal it will adjust the clock accordingly However you may choose to deactivate the atomic clock feature completely if you prefer to manually control the clock or if you live in a remote area that does not readily receive the atomic signal As long as the atomic clock is ON it will automaticlly adjust itself to the correct time overriding your manual setting Press the UP A ARROW to or DOWN VY ARROW buttons to turn OFF Atomic signal This will stop the clock from searching for the Atomic radio signal 3 SETTING THE CLOCK amp CALENDAR a Press the UP A ARROW to turn DST Daylight Saving Time function on or off Press SET to confirm and RELEASE b The HOUR will flash Press the UP A ARROW repeatedly Press SET until the correct hour AM or PM is to confirm displayed The MINUTE will flash Press the UP A ARROW repeatedly Press SET until the correct minute is displayed to confirm The YEAR will flash Press the UP A ARROW repeatedly Press SET
10. y for future reference To receive product information register your product online It s quick amp easy Log on to http www chaneyinstrument com ProductReg aspx WHAT IS AN ATOMIC CLOCK An Atomic clock is a timepiece that maintains accuracy up to one second per million years using the most precise method of time synchronization radio signals In North America the National Institute of Standards and Technologies NIST operates an Atomic clock in Fort Collins Colorado that transmits the time codes via the radio station WWVB This quality TIMEX clock includes a built in receiver that picks up the Atomic radio signal from WWVB To maintain the best possible reception place the unit so that the backside faces in the general direction of Colorado What s more the IntelliTime technology built into this clock makes for hassle free automatic setting and resetting for daylight saving time PLEASE NOTE Due to solar radiation in the atmosphere the atomic clock signal is weaker during the day Most synchronization will happen at night when there is less interference BASIC SETUP 1 Battery Installation BEGIN WITH THE OUTDOOR WIRELESS SENSOR REMOVE a BATTERY E INSTALL 2 AA COMPARTMENT ATT BATTERIES COVER ALKALINE OR LITHIUM WIRELESS SENSOR AA O19 AA ATOMIC DIGITAL CLOCK aa O10 AA O10 AA O1 REMOVE THE BATTERY COMPARTMENT COVER ON THE BACK OF THE CLOCK AND INSTALL 6 FRESH AA
Download Pdf Manuals
Related Search