Technika MC-429ID User's Manual
Contents
1. you can dock the drive to the front panel USB jack To dock a USB drive Plug the USB drive into the USB jack on the front panel Removing a USB drive A USB drive may be removed from the dock as required LISTENING TO A MP3 WMA DISC OR MP3 WMA FILES STORED ON A USB DRIVE SELECTING MP3 WMA PLAYBACK Touch the FUNCTION touchpad or press the FUNCTION button on the remote control repeatedly until CD is displayed to play from a compilation CD ROM or until USB is displayed to play from a docked USB drive MP3 WMA DISPLAY Once you have loaded your disc drive and selected disc or USB playback the contents of the disc drive will be displayed r LL iz f Total number of folders Total number of MP3 WMA on the disc drive tracks on the disc drive Indicates playback from disc or USB drive PLAYBACK CONTROL Play pause Load the MP3 WMA disc or USB drive The number of tracks on the disc and folders if applicable will be displayed Press the gt 11 SCAN button to start the disc playing When a disc is playing pressing the gt 11 SCAN button at any time will pause the CD Press the button again to re start play Selecting tracks Press the lt lt or gt gt button briefly to select the previous or next track from the disc NOTE The first press of the 144 button will replay the current track Fast search To fast search through a track press and hold the 144 or gt gt button The player will fast searc2. SCAN button to confirm factory reset The unit will now scan for DAB broadcast stations in your area After reset the settings are returned to the factory defaults and all the presets are erased CARE AND MAINTENANCE AFTER USING YOUR SYSTEM Set to Standby Switch the unit off at the mains and unplug it if you are leaving it unattended for a long period holidays etc CARE AND CLEANING All care and cleaning operations should be carried out with the unit unplugged from the mains power Occasionally wipe the cabinet with a lint free duster Never clean the unit with liquids or solvents Loudspeaker grilles can be cleaned carefully with a soft brush SPECIFICATIONS SPECIFICATIONS Supply Voltage ssseseesceee 230V 50Hz Power Consumption 20W Tuning Range FM sesse 87 5 108MHz Tuning Range AM 522 1620kHz Net Weight eessscssssseeeeee 4 095 kg C Class Il construction double insulated This product must not be connected to earth WARRANTY Your Tesco appliance is covered by a warranty for 12 months from the date of purchase If a fault develops during this period please contact the TESCO electrical help line on 0845 456 6767 Please have your original purchase receipt with you when you call This warranty in no way affects your con sumer rights UK Waste electrical products batteries should I not be disposed of with household waste Separate disposal facilities exist for your near ME
3. both types of track storage To store a MP3 WMA program Load the disc drive you want to play and wait for it to read Touch the MEMORY CLOCK touchpad on the front panel or press the CLOCK ADJ PROGRAM button on the remote control The Program Entry display will appear prompting for the first folder then track number to program P 01 Program Folder Track position number number Press the 144 or gt button to select the folder number for the first track you want to program NOTE If all tracks are arranged in the root directory of the disc only Folder 1 01 will be selectable at this stage Touch the MEMORY CLOCK touchpad on the front panel or press the CLOCK ADJ PROGRAM button on the remote control to select this folder Press the 144 or gt gt button to select the track number within this folder for the first track you want to program Touch the MEMORY CLOCK touchpad on the front panel or press the CLOCK ADJ PROGRAM button on the remote control to store this track into the memory The track will be stored and the program counter will increase to P 02 Repeat the previous four steps to store the next and subsequent tracks in your program sequence Playing the program When you have finished entering all tracks in your program press the 1I SCAN button to start the program playing Clearing a program If the CD is playing press the STOP m button to stop the disc Once the disc has stopped press
4. est facilities See www recycle more co uk or in store for details ROI Produced after 13th August 2005 Waste electrical products batteries should not be dis posed of with household waste Please recycle where facilities exist Check with your Local Au thority or retailer for recycling advice E CC a N A Tesco Stores Ltd Delamare Road Cheshunt Herts EN8 9SL Technika Hel pl ine 0845 456 6767 calls cost up to 4p per minute from a BT landline other providers may vary MC429ID V01
5. from memory NOTE Opening the disc loading door will also clear the program Repeat function When a program is stored you can set a repeat mode in the normal way if required LISTENING TO A MP3 WMA DISC OR MP3 WMA FILES STORED ON A USB DRIVE MP3 WMA PLAYBACK Your system can also play MP3 or WMA music compilations recorded onto a CD ROM compilation or stored on a USB drive The files may all be stored in the root directory of the disc drive or organised in a set of sub folders usually by album If your music tracks have been saved to include artist and title information this will be displayed as the tracks are playing LOADING A CD ROM MP3 WMA DISC Loading a disc Press the OPEN CLOSE area at the front corner of the disc lid on top of the unit The lid will open slowly e Gently place a disc on the centre spindle with the label side upward Once in place press the centre of the disc until it clicks into place on the turntable Close the lid and press the OPEN CLOSE area until it latches shut After a few seconds the disc will read and the disc data will be displayed Unloading a disc If the disc is playing press the STOP m button and wait a few seconds for the disc to stop Press the OPEN CLOSE area at the front corner of the CD lid The lid will open slowly Grip the disc at the sides and lift it out of the disc compartment DOCKING A USB DRIVE If you have saved your MP3 WMA music files to a USB drive
6. need to increase the volume setting on the player NOTE It is not possible to navigate the menu system of an iPod or other personal audio player with the remote control of the audio system if it is connected via the AUX IN jack EQ amp BASS BOOST You can change the equalisation of the sound or boost the level of bass to suit your taste To select an EQ response Press the EQ button on the remote control repeatedly to cycle through the EQ options optimised as shown below FLAT NO EQ CLASSIC ROCK JAZZ As each setting is selected the sound EQ will change To select bass boost Press the BASS button on the remote control to toggle bass boost DBBS on or off HEADPHONES There is a headphone output socket on the back panel of the unit If headphones are connected to this socket for private listening the speakers will cut out automatically SETTING THE TIMER Your system includes a timer that enables you to set times for the system to switch on and switch off automatically To set the timer Press the TIMER button on the remote control to step through each stage in timer setting shown in the sequence below To make changes to a setting press the 144 or gt button Press the TIMER button to confirm each setting and move on to set the next SET ON TIME HOURS SET ON TIME MINUTES J SET OFF TIME HOURS SET OFF TIME MINUTES SET TIMER SOURCE SET TIMER VOLUME EXIT TIMER SETTING Activating the tim
7. to dripping and splashing and no object filled with liquids such as a vase of flowers should be placed on the product No naked flame sources such as candles should be placed on the product Caution Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate this device Caution Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous exposure IMPORTANT This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communication However this is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help WARNING DANGER OF RADIATION CLASS 1 LASER PRODUCT These labels tell you that the unit contains a laser component Opening the CD compartment lid an
8. ACKS FROM A CD CD PROGRAMMING When playing a CD you can store a random sequence of up to 64 tracks to play in your preferred order Program entry takes place when the disc is stopped STORING A PROGRAM To store a CD program Load the disc you want to play wait for the disc to read Touch the MEMORY CLOCK touchpad on the front panel or press the CLOCK ADJ PROGRAM button on the remote control The Program Entry display will appear prompting for the first track number to program P 01 Program Track position number Press the 144 or gt gt button to select the track number for the first track you want to program Touch the MEMORY CLOCK touchpad on the front panel or press the CLOCK ADJ PROGRAM button on the remote control to store this track into the program memory The track will be stored and the program counter will increase to P 02 Repeat the above two steps to store the next and subsequent tracks in your program sequence Playing the program When you have finished entering all tracks in your program press the gt 1I SCAN button to start the program playing Navigating the programmed tracks When the program is playing the play and pause buttons work as normal and you can skip between tracks in the program by pressing the or gt gt button Clearing a program If the CD is playing press the STOP m button to stop the disc Once the disc has stoppped press the STOP m button again The Program will clear
9. K PAUSE e Load the CD Press the gt 11 SCAN button to start the CD playing When a CD is playing pressing the gt 11 SCAN button at any time will pause playback Press the button again to re start play Selecting tracks Press the 144 or button briefly to select the previous or next track from the disc NOTE The first press of the 144 button will replay the current track Direct access track selection Press a number button to select a track number or two numbers if the number is greater than 9 Press the gt 11 SCAN button to skip to your chosen track Fast search To fast search through a track press and hold the 144 or gt gt button The player will fast search through the track at high speed in the chosen direction until the button is released CD REPEAT AND SHUFFLE REPEAT AND SHUFFLE FUNCTIONS You can repeat a single track the whole disc or select shuffle to play the tracks in a random sequence To set a repeat or shuffle mode Press the PLAY MODE button on the remote control to cycle through the options of Repeat 1 repeat current track Repeat All Repeat the disc or Shuffle play tracks in a random sequence The Repeat Repeat All or Shuffle symbol will be displayed ESP SYSTEM The ESP system is an anti shock feature for CD playback To toggle ESP on or off Press the INFO ESP DISPLAY button when playing a CD The ESP legend will be displayed when ESP is switched on PROGRAMMING TR
10. MC 429ID Owners Handbook Made for mE Mini DAB CD MP3 audio system with iPod dock iPod IMPORTANT SAFETY INFORMATION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK This symbol indicates that there are impor tant operating and maintenance instructions in the literature accompanying this unit This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a slightly damp cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install or operate near any heat sources such as radiators stoves or other apparatus that produce heat Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as the power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Warning To reduce the risk of fire or electrical shock do not expose this product to rain or moisture The product must not be exposed
11. PROGRAM button on the remote control The display will show the legend 24 HOUR with the digits 24 flashing NOTE The display will not light during clock setting Press the 144 or gt gt buttons to select 24 hour or 12 hour mode for the clock Press the CLOCK ADJ PROGRAM button The display will show the time currently set with the hours digits flashing Press the 144 or gt gt buttons to set the hours digits to the correct time Press the CLOCK ADJ PROGRAM button The display will show the time currently set with the minutes digits flashing Press the 144 or buttons to set the minutes digits to the correct time Press the CLOCK ADJ PROGRAM button The clock settings will be stored STANDBY CONTROL STANDBY CONTROL To turn the system on Touch the touchpad or press the C STANDBY button on the remote control The display will light and the system will set to play the last function used If this was radio the last station played will be selected To turn the system off Touch the touchpad or press the C STANDBY button on the remote control The system and display light will switch off The clock will continue to run whilst mains power is connected ADJUSTING THE VOLUME VOLUME CONTROL To increase the volume Touch the VOLUME A touchpad or press the VOLUME button on the remote control To decrease the volume Touch the VOLUME W touchpad or press the VOLUME button on the remote control MUTE Th
12. STENING TO FM RADIO To change to the FM band Touch the FUNCTION touchpad or press the FUNCTION button on the remote control repeatedly until FM is displayed To manually tune to FM stations Press the 144 or gt gt button repeatedly to tune down or up the band one frequency step at a time To auto tune to FM stations Press the gt 11 SCAN button to tune to the next station in the band To change the sweep direction press the 144 button to tune down or gt gt button to tune up before pressing the gt 11 SCAN button Tuning will stop automatically when the station is reached STATION PRESETS DAB and FM presets Your radio can store up to 10 of your favourite stations as presets numbers 0 9 on both the DAB and FM bands for quick recall To store a preset Tune to the station you want to store as a preset From the remote control press and hold the NUMBER 0 9 button for the preset location you want to store The display will confirm that the station has been stored in this preset number To recall a preset Press the NUMBER 0 9 button briefly to recall a station stored in this preset number The radio will re tune to the preset station number that you selected DAB amp FM DISPLAY MODES DAB DISPLAY MODES When playing a DAB station you can change the information on the display by changing the display mode To change the display mode Press the INFO button repeatedly to cycle through the options listed
13. at least 150mm between each speaker and the main unit Connecting the speakers 1 Locate the block of 4 speaker terminals on the back of the unit 2 Lift the latches on the left channel speaker terminals as shown in the drawing fm o o F 3 Feed the wires from the left speaker into the two terminals observing the colour code with the black striped wire connecting to the bottom black terminal A o m la ea 4 Press the latches down to lock the wires in place o A ma 5 Repeat to connect the right speaker to the right channel speaker terminals 6 Check that the bare ends of the wires are not exposed and cannot touch together CONTROLS amp CONNECTIONS FRONT amp TOP VIEW SOSSSOOGSSSOSGSOHOOSOSHOCOCODHLOOHO NOTE This symbol indicates a touch sensitive area of the front panel Lightly touch in this area to operate the function BACK VIEW Disc compartment lid Lid OPEN CLOSE area iPod docking bay Display Next folder touchpad Previous folder touchpad Skip forward button Volume up touchpad Volume down touchpad Enter button USB jack So o D Aux In jack Menu touchpad A Stop button Memory clock touchpad Skip back button Function touchpad 22 Play Paus Scan button Standby touchpad Headphone jack Left speaker connections Right speaker connectio
14. battery door and clip it in place DISPOSAL OF BATTERIES Dispose of used batteries with regard to the recycling regulations in your area Do NOT short circuit batteries or throw them into water the general rubbish or in a fire Weak batteries can leak and damage the remote control Replace them in good time GETTING STARTED REMOVING THE PACKING FROM THE CD PLAYER Before connecting power to your audio system the protective packing should removed from the CD compartment To remove the protective packing Open the CD compartment by pressing down on the OPEN CLOSE area marked at the front corner of the CD lid The lid will open Remove any cardboard protective packing from the CD compartment Close the CD lid DAB FM RADIO AERIAL Before using your radio for DAB or FM reception unwrap and fully extend the aerial wire You may need to adjust the position of the aerial wire for maximum signal strength CONNECTING POWER Check that the mains voltage marked on the rating plate under the unit is the same as the voltage in your area Plug the AC power cord into the AC inlet Plug the mains plug into the wall socket and switch the mains power on SETTING THE CLOCK Automatic clock setting The clock time will set automatically when a DAB station is first tuned In areas where DAB reception is not available manual clock setting will be necessary To set the clock manually With the system set to Standby press and hold the CLOCK ADJ
15. d defeating the safety interlocks will expose the user to radiation from the laser beam Do not stare into the laser while it is operating ELECTRICAL INFORMATION Mains Supply The mains operating voltage of this unit is marked on a rating plate on the underside of the unit The means of disconnecting this appliance from the mains supply is the mains plug This should be unobstructed and readily operable at all times INDEX IMETOUUCEION sieniin 2 Unpacking Placement Connecting Speakers csssssscccscssssesseecsecconseetecees 3 Controls and COMMECTIONS ssccccsseesescesseseeeeeeeeee 4 Display features scsccccsinssstasschestasesscscnttcaseeranigienvaen 5 Remote conttolisic chats aanaeaacctcaniaigeanses 6 Getting Started sisian 7 Setting the clock al Standby control Volume sssssssssssssssssssssrsssrsssesssess 7 Listening to DAB radio sssssessscccsssssseesceesssnneesees 8 Listening to FM radio ssssssssescsessssesessessssnesesees 8 Presets O 8 DAB amp FM Display MOdeS ssssscccssssseescessssnneesees 9 DAB Scanning Advanced DAB operation 10 Listening toa CD essiensa 11 CD repeat and shuffle sssssssssccssssessessssessessesees 11 Programming tracks from a CD sssssscsssseeseessees 12 Listening to a MP3 WMA disc USB drive 13 Programming MP3 WMA tracks ssssssssccsssesseees 15 IPod adaptors sss cscsssssstastasscassazesessssvessssii
16. e Mute function will set the volume to minimum To mute the volume Press the MUTE button on the remote control to set mute at any time Press the MUTE button again to restore the volume to its previous setting LISTENING TO DAB RADIO SELECTING DAB RADIO OPERATION To select DAB radio operation Touch the FUNCTION touchpad or press the FUNCTION button on the remote control repeatedly until DAB is displayed After a few seconds the radio will tune to the last used station INITIAL DAB RADIO SCAN When DAB radio is used for the first time The system scans all usable stations full scan and stores them alphanumerically 1 Radio 2 Radio AA Radio The initial scan will take a few minutes and a progress bar will be displayed with the number of services found After the scan the clock will be set the radio will display the first station in the sequence and begin playing at the default system volume of 13 Note Ifno stations are found after the scan it may be that the Number of services found signal in your current location is too weak If this happens switch the radio off and move it to a location with a stronger signal Repeat the scan process in the new location The stations found will be stored in an alphanumeric list TO SELECT ANOTHER STATION Press the 144 or gt gt button to browse the list of stations on the display When you find the station name you want to listen to press the ENTER button LI
17. e with FM technology FM reception is available on your system for use in those locations where there is no usable DAB service A headphone output is provided for personal listening PRELIMINARIES UNPACKING Carefully unpack the unit If it is damaged please return it to your nearest Tesco store for replacement Remember to take your purchase receipt with you Retain the User Handbook If you pass the unit on to a third party make sure you pass on the handbook We suggest you retain the packaging If you dispose of it do so having regard to any recycling regulations in your area CONTENTS The carton should contain The MC 4291D audio system 2x Loudspeakers Remote control with 2 x AAA batteries Operating Manual If any items are missing or damaged contact your nearest TESCO store for a replacement Have your receipt ready when you call Retain the packaging If you dispose of it do so having regard to any recycling regulations in your area PREPARATION FOR USE PLACEMENT Place the unit on a sturdy table or shelf where it cannot get knocked over and where there is a clear line of sight to the remote handset Make sure that there is a clearance of 10cm 4 inches around the unit for ventilation LOUDSPEAKERS Placing the speakers Unwrap the speaker wires from the ties securing them to the back of each speaker Place a speaker on either side of the main unit preferably at the same height and with
18. eccesaseectosss 16 Playing ath iPodiin 17 AUX SOUNCES sS 18 EQ SBaSSIDOOSE siisii 18 Headphones sssssscsssssssesssssscesssscsesssseesssssseessssees 18 Timer amp Sleep fUNCtIONS ssssscssssssccssseeseesseeeseess 19 SYSE ESE tusni 19 Care amp maintenance srsssesscccessssessseccscenssseesess 20 Specifications irinenn annin 20 INTRODUCTION Introduction DAB Digital Audio Broadcasting technology allows many more radio stations compared to FM DAB transmissions do away with problems of hiss and fade that plague AM and FM broadcasts and are less likely to be affected by adverse weather conditions or other sources of interference In addition to speech and music DAB transmissions carry high levels of data far greater than the limited RDS information available on FM stations Unlike FM DAB is broadcast on many frequencies Many countries in Europe including the UK use Band Ill 174 230 MHz others France for example use the L Band 1452 1492 MHz Germany uses both bands Your radio can tune Band Ill Countries in Europe that use Band III include Belgium Denmark Holland Italy Norway Portugal Spain Sweden Switzerland Your radio will tune stations in all these countries Your radio cannot receive French or German stations broadcasting in the L Band though FM services are available all over Europe Being digital DAB transmissions can have a wider frequency range and greater dynamics than that availabl
19. er When timer setting is complete the timer can be switched on or off by pressing the TIMER button The Timer symbol shows on the display when the timer is activated SLEEP MODE THE SLEEP FUNCTION The Sleep function allows you to program your system to switch itself off after a set period in 10 minute steps from 90 minutes down to 10 minutes To activate the Sleep function Press the SLEEP button The display will show Sleep 90 Now press the SLEEP button repeatedly until your required sleep time in minutes appears on the display When sleep mode is set the sleep symbol will appear on the display to confirm that sleep mode is set on Sleep symbol Your system will continue to play then will set to Standby when the sleep time expires To check the Sleep time remaining Press the SLEEP button during Sleep mode The Sleep time remaining will be shown on the display To cancel the Sleep function Press the SLEEP button repeatedly until the sleep symbol disappears or set the unit to Standby SYSTEM RESET DAB is a terrestrial system and frequencies in different areas vary If you move the radio to another part of the country performing a Full Scan may not be enough to re program the radio you may need to reset the radio To restore the factory settings Set the system to DAB mode Press and hold the MEMORY CLOCK button on the front panel until the display flashes Factory Reset Press the gt 11
20. h through the track at high speed in the chosen direction until the button is released If the music files on the disc are organised into folders you can change between folders To change folders if there are more than 1 Touch the FOLDER A or W touchpad or press the FOLDER PRESET UP or DN button on the remote control to scroll through the folders on the disc When you have selected the folder you want you can then search for tracks within the folder using the or gt gt button Direct access track selection Press a number button to select a track number Press the gt 11 SCAN button to skip to your chosen track REPEAT AND SHUFFLE FUNCTIONS You can repeat a single track the current folder the whole disc or select shuffle to play the tracks in a random sequence To set a repeat or shuffle mode Press the PLAY MODE button on the remote control to cycle through the options of Repeat 1 repeat current track Repeat Folder Repeat all tracks in the current folder Repeat All Repeat the disc or Shuffle play tracks in a random sequence The Repeat Repeat Folder Repeat All or Shuffle symbol will be displayed PROGRAM PLAY OF MP3 WMA FILES STORED ON A DISC OR USB DRIVE STORING A MP3 WMA PROGRAM Some MP3 WMA compliations will be arranged with all tracks in the root folder of the disc drive others will be arranged within a set of folders usually the music albums The same sequence is used for
21. in the chart below DLS SCROLLING TEXT PROGRAMME TYPE MULTIPLEX NAME TIME amp DATE 4 CHANNEL amp FREQUENCY AUDIO BIT RATE amp MODE SIGNAL ERROR RATE T DLS SCROLLING TEXT This is a scrolling message giving real time information song titles news headlines etc PROGRAMME TYPE This describes when available the style of the programme being broadcast MULTIPLEX NAME GROUP NAME is the name of the DAB Multiplex that is currently tuned TIME amp DATE Shows the current time and date Time and date are updated by broadcasted information CHANNEL AND FREQUENCY The Channel and Frequency display shows the multiplex channel number and the multiplex frequency for the station currently tuned BIT RATE DAB allows broadcasters to vary the BIT RATE or the amount by which an audio signal can be compressed depending on the type of broadcast This enables the amount of stations on a multiplex to be maximised Speech and News are often broadcast at a lower Bit Rate music needs a higher Bit Rate for good fidelity SIGNAL ERROR RATE This Signal Error Rate is a measure of the signal quality The lower the figure the better the signal quality The Signal Error Rate display is helpful when setting up the aerial wire Move the wire to minimise the readiong on your favourite stations FM DISPLAY MODES Some FM stations broadcast additional RDS station information When RDS data is present on an FM transmiss
22. ine the exact model of your iPod refer to this web link http support apple com kb HT1353 You can then browse the iPod accessories page on the Apple website to find an adaptor for your iPod model that can be purchased on line CONNECTING OTHER iPod MODELS INC SHUFFLE To connect your iPod via the AUX IN jack Using a 3 5mm stereo jack cable not supplied connect one end of the cable to the headphone socket of the iPod and the other end to the AUX IN jack on the front panel Headphone jack 4 To AUX in aani es ye au To listen to your iPod follow the instructions on page 15 for playing equipment connected to the AUX IN jack NOTE The volume control of the iPod must be turned up when playing through the AUX IN jack NOTE An iPod connected to the AUX IN jack cannot be operated from the remote control DOCKING AN iPod DOCKING YOUR iPod To dock your iPod e Check that the correct iPod adaptor is fitted to the docking bay Locate the iPod on the Docking Connector and press it gently home To remove your iPod from the dock e Grip the iPod at the sides Lift the iPod gently from the dock PLAYING FROM AN iPod To play music from your iPod Press the FUNCTION button repeatedly until iPod is displayed You can now operate your iPod functions from the controls on the front panel or remote control Playback functions Press the 11 SCAN button to toggle the iPod between Play and Pa
23. ion RDS will be displayed as shown below T Station name RDS information scrolling text etc RDS broadcast When playing an FM station you can change the information on the display by changing the display mode To change the display mode Press the INFO button repeatedly to cycle through the options listed in the chart below RDS SCROLLING TEXT This is a scrolling message giving real time information song titles news headlines etc PROGRAMME TYPE This describes when available the style of the programme being broadcast TIME amp DATE Shows the current time and date Time and date are updated by broadcasted information FREQUENCY The Frequency display shows the frequency for the station currently tuned DAB SCANNING When first used your audio system scanned the DAB band for available stations The station services found were then stored in your system s memory You can re scan the band at any time if you move toa different area or just to refresh the stored list of available stations TO START A FULL SCAN Select the DAB band Press the gt 11 SCAN button to start a scan The unit will now display the legend SCANNING and a bargraph to show scan progress The number of services found during the scan will be shown at the right side of the display After running a scan the radio will re tune to the last tuned station or if this is not available the first station found in alphabetica
24. l sequence DAB ADVANCED OPERATION The DAB radio of your audio system includes several advanced features To select the advanced features Touch the MENU touchpad on the front panel or press the MENU button on the on the remote control to open the advanced operation menu To scroll through the menu options below press the 144 or gt gt button 4 4 4 4 To select a menu option press the ENTER button MANUAL TUNE Manual tuning may be used to tune the band by frequency or multiplex A station multiplex may then be selected and displayed with a signal strength bargraph to assist with aligning the aerial for best signal To tune manually Select Manual Tune from the menu Press the 144 or gt gt button to scroll through the multiplex numbers and frequencies To select a multiplex press the ENTER button The selected multiplex number will be displayed with if present the multiplex name and signal strength Press the 144 or gt gt button to re tune to another multiplex FULL SCAN You can start a local or full scan by selecting these menu options This is an alternative method of starting a scan to that described in the SCANNING section on this page DRC VALUE DRC is Dynamic Range Compression Enabling DRC may improve the sound of DAB radio when listening in a noisy room You can set the DRC value with this menu option Select DRC from the menu Press the 144 or gt gt button to select the DRC value y
25. ns Main power cable DAB FM aerial wire cig DISPLAY FEATURES o t cis J o gt Ihe O ALLOG ws inal DB ao y Text display for tracks stations Text display for information Play symbol Timer set symbol Sleep symbol Disc loaded symbol Pause symbol Repeat mode symbol Repeat folder symbol Repeat All symbol Shuffle symbol Aux mode symbol FM mode symbol MP3 format symbol WMA format symbol DAB mode symbol SO SOGSSOOCOHLOOHO REMOTE CONTROL REMOTE CONTROL BATTERIES GBSSOSOGSSSGSOSOGGSOOGOOOoOeGeedod STANDS aux Aux mode button O ie Mute button fees OY Timer button Om O Next button o ETO Stop button Volume up button Volume down button Bass button Sleep button Numeric keypad EQ button Previous folder button Next folder button Play mode button Play Pause Scan button Previous button Enter button Menu button Clock set Program button Function button Info ESP Display button Standby button FITTING OR REPLACING THE REMOTE CONTROL BATTERIES When replacing the batteries in the remote control refer to the diagram above 1 Press the catch on the battery door across 2 While holding the catch open the battery door 3 Fit two AAA batteries observing polarity as shown When replacing the batteries use only the same AAA type specified 4 Re fit the
26. ou prefer from the options of Off high or low Press the ENTER button to confirm your selection PRUNE If your station list includes stations that you can no longer receive you may have moved to a different area you can select the Prune option to remove any stations that can no longer be received from the Station List SYSTEM If you choose this option the radio s software version is displayed This is purely an aid for technicians should your radio ever need service LISTENING TO A CD LOADING DISCS To select CD operation Touch the FUNCTION touchpad or press the FUNCTION button on the remote control repeatedly until CD is displayed Loading a disc Press the OPEN CLOSE area at the front corner of the disc lid on top of the unit The lid will open slowly e Gently place a disc on the centre spindle with the label side upward Once in place press the centre of the disc until it clicks into place on the turntable Close the lid and press the OPEN CLOSE area until it latches shut After a few seconds the disc will read and the disc data will be displayed a F gt T Total number Total play oftrackson time the CD Unloading a disc If the disc is playing press the STOP button and wait a few seconds for the disc to stop Press the OPEN CLOSE area at the front of the CD lid The lid will open slowly Grip the disc at the sides and lift it out of the disc compartment CD PLAYBAC
27. the STOP m button again The Program will clear from memory NOTE Opening the disc loading door will also clear the program Navigating the programmed tracks When the program is playing the play and pause buttons work as normal and you can skip between tracks in the program by pressing the 144 or buttons Repeat function When a program is stored you can set Repeat 1 or Repeat All mode in the normal way if required iPod ADAPTORS Before docking your iPod you must first check if your iPod has a docking connector Early iPod models do not have one and cannot be docked to your unit The docking connector is located on the base of the iPod as shown below Docking Connector Before docking your iPod you must fit the correct iPod adaptor to the docking bay Each iPod adaptor matches the shape of a particular iPod and is necessary to ensure that your iPod is securely held when docked iPod adaptor ae Docking bay FITTING THE iPod ADAPTOR When your iPod was new it may have been supplied with a standard dock adaptor in the packaging If so fit the adaptor by pressing it gently into the Docking Bay as shown above NOTE Do not dock an iPod without fitting the correct adaptor you may damage the iPod and your unit SELECTING AN ADAPTOR If you don t have a dock adaptor If your iPod was not supplied with a standard dock adaptor or if you have lost the adaptor you can buy one from Apple on line To determ
28. use mode at any time Press the 144 or button to select the previous or next track iPod menu functions You can press the MENU ENTER and FOLDER PRESET UP or DN buttons on the remote control or the front panel touchpads to navigate the iPod menus To move up through the iPod menus press MENU To scroll up and down menu items press the FOLDER PRESET UP A or DN Y touchpads buttons To select menu items press the ENTER button From the iPod menu you can select from Music Photo or Video playback then select from tracks playlists pictures and movies that are stored on your iPod iPod repeat modes Press the PLAY MODE button on the remote control repeatedly to cycle through Repeat 1 Repeat All or Repeat Off modes on the iPod the mode set will display on the iPod screen CHARGING AN iPod When an iPod is docked and the unit is switched on the iPod will begin to charge automatically NOTE The iPod will stop charging if the unit is set to Standby PLAYING VIA THE AUX JACK To play music from an iPod or Personal Audio player connected to the AUX IN jack Touch the FUNCTION touchpad repeatedly until AUX is displayed or press the AUX button on the remote control Set the iPod or Personal Audio player to play Turn the volume level on your Personal Audio player up to about half level Set the volume on your audio system to the level you require If the volume will not set high enough you may
Download Pdf Manuals
Related Search