Technics SL-P9066 User's Manual
Contents
1. Nluminates Press gt to resume play To stop play Press B The display will show the total number of tracks and the total playing time of the current disc Total number of tracks Current disc Total playing time Tep LEFF TIIT lt gt c i i li j ly lt ly DISC a h TRACK MIN lt C Xi The total playing time displayed includes the silent sections between tracks For this reason it may be a few seconds longer than the playing time indicated on the disc Press gt to resume play CAUTION Do not move this changer with a compact disc inside the unit If a disc comes off the disc tray it might be scratched or the changer might become incapable of playing Refer to Cautions concerning the moving of this unit on the back cover You can program up to 32 selections from the five discs in any order as you desire 1 PROGRAM MODE In the stop mode WR Press PROGRAM MODE so that the PGM indicator illuminates Each time the button is pressed the display will change in the following order RGM gt DEL si oe eo L A Da DISC aa No ae Ea ae ieee 92 Press the desired disc but ton 1 5 sca osce oscs For example O O O O O To select disc 3 press DISC 3 ay AEF l f lt psc Ti im No Specified disc number The AL indication shows that all the tracks on the disc are selected To program by means of disc numbers o2. tt at 2 dil Ituminates The changer will stop automatically when all the tracks on all discs have been played once For your reference When a disc with fewer tracks finishes playing that disc will be skipped and the changer will continue playing the remaining track on the other discs in spiral sequence To cancel spiral play mode SPIRAL Press SPIRAL again The SPIRAL indicator will go out The changer will return to sequential play mode from the current track on the current disc which is playing This function is convenient to use when searching for a desired track The function will search from the beginning of the track for a loud section and will play 10 seconds of the track centering around that point The order of scanning is the same as for play mode ID SCAN ID SCAN Press ID SCAN 5 ID scan will start l rinack MIN j gt gt gt ZIN lt gt lt gt c Huminates When the desired track has been found Press P The changer will play the track from the begin ning To cancel ID scan ID SCAN Press ID SCAN while this function is in operation The ID indicator will go out The changer will continue to play from track being played You can search rapidly forward or backward on the disc for specific sections aa SEARCH gt gt A seny i a ai a a i ri let gt Jeb ae
3. Technics Compact disc changer oL PD967 SL PD867 oL P9066 Operating Instructions MISE The photograph shows the SL PD867 model USE Before connecting operating or adjusting this product please read these instructions completely Dear Customer Thank you for purchasing this Technics product For optimum performance and safety please read these instructions carefully These operating instructions are applicable to the SL PD967 SL PD867 and SL P9066 models These operating instructions however fundamentally explain the operation of SL PD967 model re The mode number and serial number of this product can be found on either the back or the bottom of the unit Please note them in the space provided below and retain them for future reference MODEL NUMBER SERIAL NUMBER Table of Contents Before use pee i i r a aaa aiara aaaaaaaaaaaa aM Precautions aeaa 4 Front panel controls 5 Connections 0 6 Operations Basic operations 0 7 Sequential BlaVin stacker danduins EPRE tf To directly access a desired track 8 TOexchande discs during DIAV sesi oan tensed agi owes 8 FOAeMDOlatily SOn Dla oense Eee cebve dees eas 8 TO StOD lay scoot nites coed Eei ii Rae a a E eens 8 Program Play 20c 04ac2 a ciinreuenroisnas ee 9 Using the remote control transmitter SL PD967 SL PD867 only ESSES 10 Random play eeassrniasrestiad iian peepee 10 n
4. The remaining play time on side A or side B will be shown in display 2 and the elapsed play time for side A or side B will be shown in display 4 When you stop playing and then start play again the display will return to display 15 Edit guide When recording the changer will automatically program the tracks for tape sides A and B in accordance with the length of the tape so that none of the tracks will be interrupted before they are completed In addition the program will also include a silent interval of ap proximately 4 seconds between tracks Example Recording from a disc containing seven tracks on to a 60 minute tape Silent interval between tracks approx 4 seconds Side A 30 min V7 Track 1 Track 2 Track 3 Track 4 Y VA Side B 30 min ee ee eee ee I QOoOO00L defn S 4 gt EE i Numeric buttons 1 DISC SKIP Press DISC SKIP to select the disc to be recorded c gt E FA A i lt i gt a L i 2 DISC i f Rack MIN lt lt gt 2 Prepare the tape deck for recording Set the Dolby NR reverse mode recording level etc as instructed in the Operating Instructions for the tape deck Set so that recording is possible from the beginning of the tape 3 EDITGUIDE Press EDIT GUIDE to select the tape length Each time you press the button the display showing the tape length changes as follows
5. Choose the length of the tape you will use 646 C60 600 2 C IIluminates More precise time settings are also possible Refer to the instructions at right The display shows the data of the tracks to be recorded as follows Number of tracks Tracks to be recorded to be recorded ji Cp ReaD H A TRACK lt gt lt gt EDIT OS Side A Remaining time on side A c I j erry i i at lt 2 S52 EDIT BA Number of tracks Tracks to be to be recorded recorded c gt ri gt ane gt 1 lt gt lt E EDIT MB Side B Remaining time on side B c gt LI o i j i ct f lt gt 4 2 EDIT S In this example disc 5 can be recorded with tracks 1 4 on side A and tracks 5 7 on side B of the cassette tape 4 Start recording on the tape deck and gt then immediately Press gt When the last track set for recording on side A is finished the changer will enter the pause mode Set the tape to the position from which recording will begin on side B and then perform step 4 once again When all the programmed tracks on the specified disc finish play ing the changer will automatically stop The edit guide mode will be canceled at the same time To enter a desired recording time other than 46 60 or 90 minutes 1 Select C in st
6. Pa B A o A i if j ae PEN SE FE a ee oe eee eee Omoomommowmncrt One disc random play The changer will play all tracks on the current disc in a random order Then it will choose a new disc randomly excluding the discs already played and play all tracks on that disc in a random order RANDOM In the stop or play mode Men Press RANDOM MODE so that the 1 DISC RND indicator illumi nates Each time the button is pressed the display will change in the following order 1 DISC RND FULL RND gt off c D gt C CD c gt C Full random play eae a a L li ii i l J DISC TRACK MIN SEC 1DISC RND gt Itluminates Each track to be played back is selected randomly from all of the tracks on all of the discs excluding the tracks that have already been played PARDON In the stop or play mode Press RANDOM MODE so that the FULL RND indicator illuminates Each time the button is pressed the display will change in the following order 1 DISC RND gt FULL RND gt off gt I S EE E r Li Li i lt 19 lt ly DISC TRACK MIN SEC E PULA IIluminates The changer will stop automatically when all the tracks on all discs have been played once To cancel random piay mode Press W The 1 DISC or FULL RAND indicator will go out You can select up to
7. The changer switches to the play standby mode at the beginning of the track Nluminates Flashes Press again to start play Press at the beginning of each track To cancel auto cue mode AUTOCUE Press AUTO CUE The A CUE indicator will go out The auto cue function may not cause the unit to wait exactly at the beginning of a track if the track begins with a very soft passage or if there is a lot of background noise With this changer you can only play compact pepe ll discs having this mark DIGITAL AUDIO Handling precautions _ To open the compact disc case gently press the sides of the top and pull up To remove the disc from the case press the center holder and lift the disc holding by the edges Center holder To return the disc to the case insert the disc with the label facing up and press downward at the center Hold compact discs by the edges so as not to soil the surface with fingerprints Fingerprints dirt and scratches can cause skip ping and distortion Do not use record cleaning sprays benzine thinner static elec tricity prevention liquids or any other solvent on a disc If the surface is soiled wipe gently with a soft damp water only cloth Always move the cloth directly outward from the center of the disc not in a circular motion as with standard phonograph records Correct Incorrect If you are taking the disc from a cold to a w
8. button Il 8 19 Play button gt l 8 20 Search buttons lt lt SEARCH PP 13 2 Skip buttons d lt SKIP gt Pi 14 22 Loading drawer open close button 4 OPEN CLOSE 7 23 Disc trays 1 5 7 Connections Please check and identify the supplhed accessories Veal SL PD967 SL PD867 onl Batteries 2 Stereo connection cable 1 Remote control transmitter 1 UM 4 AAA R03 AC power supply cord 1 SJP2249 6 RAK SL122WH LE For USA SJA175 1 For Canada SJA175 For instructions on preparation and operation of the remote con trol transmitter refer to the separate booklet titled How to use the remote control transmitter Before connecting the changer to your audio system make sure that the power of the changer and all other system components are turned off Stereo connection cable White L G H Red R Receiver or amplifier Household AC outlet AC 120 V 60 Hz Basic operatio Sequential play All of the discs will be played beginning from track 1 on the Selected disc 5 DISC SKIP 2 4 The explanation below is an example of operation in the case where all five disc trays in the changer are holding CDs 1 POWER Press POWER The unit will switch on 2 OPEN CLOSE Press OPEN CLOSE to open the loading drawer Indicates that the loading drawer is open of Eez ose II Lha Numbers
9. new random sequence and play continuous ly The sequence differs each time In spiral play mode The changer plays all tracks of all discs repeatedly in the se quence of spiral play To cancel repeat mode REPEAT Press REPEAT again The indicator will go out The various time information of the current disc can be displayed SL PD967 Only available from the remote control SL P9066 Only available from the main unit MW a F uy a 3 l li n Pae TIME MODE TIME MODE ar IP CES CS RENS ee E Bim pa Dg amr hee Sie Sens eae Y a a TIME MODE In the play or pause mode Press TIME MODE The information will change as described below each time you press the button F 1 Track number and elapsed play time of the current track Tce C DAE G gt c Cid Te D gt lt lt c 3 Track number and remaining time of the current track Te p gt pS E gt rd x c j nal Pe Li _ iy ey TRACK MIN SE lt Zl L 4 Total elapsed play time on the disc cps Pca C33 Gr gt pcp When track number 21 or greater is playing display 3 shows In all play modes In program delete random spiral mode The displayed information will alternate between displays and 3 each time the button is pressed During operation of the edit guide function
10. of the trays in which discs are loaded 3 Load the disc s on the disc tray s The discs can be loaded two at a time by pressing DISC SKIP to rotate the carousel Disc tray Carousel Disc number upward Do not load 3 8 cm and 5 12 cm discs on the same disc tray CAUTION Do not touch the loading drawer and carousel while they are in motion and do not attempt to rotate the carousel by hand doing so could result in incorrect operation of the unit and or damage to the discs Loading drawer Geis ar dat eeceee cw mr ae Wa Sa ae Ai Tec a a By a cae eee ig Te ee ei ea i uh a a gE ee te we Be Bs 4 ceewctose Press OPEN CLOSE again to close the loading drawer Do not attempt to close the drawer by hand Current play position The numeral illumi nates with a red color Lf iil DISC l A IraacK lluminates when a disc is in the disc tray If there is no disc in the disc tray the indication disappears when the disc tray comes to the play position Press the desired disc but ton 1 5 osc isc osca oisce oss Play will begin from the selected disc O O O O O If a disc is not on the selected disc tray the changer plays the disc at the next number Disc number in play Elapsed play time S iS C gt lt gt gt gt Track number in play Play indicator SL PD967 onl The illumination of a disc button indicates that there is a disc in the correspon
11. tone sharp CER The 5 6 position is a half tone flat b Pitch display To fine tune the pitch Turn the knob and then immediately turn it back to the original position In this case the pitch will change by 0 1 only To play in 0 standard pitch Press OFF ON so that the pitch control indicator will switch off Even after the pitch control indicator has been switched off the pitch setting will remain in memory For your reference e The pitch can be adjusted by turning the knob even if the pitch control indicator is switched off The playback sound will not change if this ts done To play back at the setting pitch press OFF ON to make the pitch control indicator illuminate e While changing the pitch the time display will show the playback position only This will not match the actual playback time e The pitch value and the on off setting of the pitch control will re main stored in the memory even after the unit is switched off However if the power cord is unplugged or the power supply is otherwise interrupted for an extended length of time the memory will be erased 17 18 Auto cue function SL PD967 only The auto cue function allows the unit to wait in a standby condi tion at the beginning of each track so as to start play right when you are ready When each track finishes playing the unit skips to the beginning of the next track and switches to the play standby mode Press gt
12. 07094 Panasonic Sales Company Division of Matsushita Electric of Puerto Rico Inc San Gabriel Industrial Park 65th Infantry Ave Km 9 5 Carolina P R 00630 Printed in Japan Technical specifications AUDIO No of channels Frequency response Output voltage Dynamic range SIN Total harmonic distortion Wow and flutter DA converter Output impedance Load impedance E PICKUP Wavelength E GENERAL Power consumption Power supply Dimensions W x H x D 2 left and right stereo 2 20 000 Hz 1 dB 2 V at O dB 92 dB 100 dB 0 007 1 kHz O dB Below measurable limit MASH 1 bit Approx 1 kQ More than 10 kQ 780 nm SL PD967 12 W SL PD867 SL P9066 11 W AC 120 V 60 Hz SL PD967 430 x 125 377 mm 16 15 16 x 4 15 16 x 14 27 32 SL PD867 SL P9066 430 x 125 x 370 mm Weight Note 16 15 16 x 4 15 16 x 14 9 16 4 6 kg 10 1 Ib Specifications are subject to change without notice Weight and dimensions are approximate MASH is a trademark of NTT Matsushita Electric of Canada Limited 5770 Ambler Drive Mississauga Ontario L4W 2T3 Panasonic Company West of America Division of Matsushita Electric Corporation of America 6550 Katella Ave Cypress CA 90630 RQT2327 P H1293G0
13. 32 selections that you do not want to hear and put them in the changer s memory Then you can enjoy se quential one disc random or full random play of only your favorite tracks 2 51 RANDOM MODE 3 1 PROGRAM MODE In the stop mode Press PROGRAM MODE twice so that the DEL in dicator illuminates Each time the button is pressed the display will change in the following order RGM gt DEL ofi SETENE EEA cl gt tf p E if ee Sk DISC l drna no 7 lt gt C D DEL Iluminates 2 Press the disc button 1 5 For example oset oisce oes oxa oscs TO delete disc 3 press DISC 3 JO l Zi ose fL maer no The AL indication shows that all the tracks on the disc are selected To delete by means of disc numbers only repeat the above operation The count will in crease by one for each operation 3 Press the numeric button s gt 10 to specify the track number For example To delete track number 20 press gt 10 then 2 and then 0 ET entered DE a E E E E E E a a S E S E e S E E A S a A a ey 4 Repeat steps 2 and 3 until you have completed the desired entry If you enter non existing disc s or track s soon after the loading drawer is closed or when it is open the corresponding indicator illuminates and the entry is included in the count in the play mode the changer will cancel the non existing entry a S S ST Gy c gt C
14. D If you attempt a 33rd selection the F full indica tion will be displayed C S Press gt to start play To enter additional selections to be deleted during play repeat steps 2 and 3 For random play while deleting unwanted tracks Proceed through step 4 above and then To activate one disc random play press RANDOM MODE To activate full random play press RANDOM MODE twice To clear the entire contents to be deleted In the stop mode Press I The display will indicate as below am gt gt lt gt gt c If ry L l DISC TRACK No DEL To cancel delete mode PROGRAM MODE jin the stop mode Press PROGRAM MODE The changer will return to sequential play mode The contents to be deleted will remain stored in the memory until they are cleared even after the delete mode is canceled Therefore after using delete play it is possible to cancel the delete mode and use another play mode except program play and then still use the same delete play again at a iater time In addition if the disc is replaced with another one delete play will be carried out using the new disc If non existing entries oc cur at this time they will be canceled For your reference The delete mode and the contents to be deleted will remain Stored in the memory even after the unit is switched off However if the power cord is unplugged or the p
15. UTION e This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications e THIS PRODUCT UTILIZES A LASER USE OF CONTROLS OR ADJUSTMENTS OR PERFOR MANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIA TION EXPOSURE DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL 8 9 10 POWER MEN A f 11 42 4304 15 6 7 No Name Ref page 1 Power STANDBY b ON switch POWER STANDBY b ON 7 Press to switch the unit from on to standby mode or vice versa tn standby mode the unit is still consuming a small amount of power 2 Pitch control button indicator PITCH CONTROL OFF ON 17 3 Pitch control knob PITCH CONTROL 17 4 ID scan button ID SCAN 13 5 Edit guide button EDIT GUIDE 16 6 Remote control signal sensor SENSOR 7 Display 8 Disc buttons DISC 1 5 7 9 Disc skip button DISC SKIP 7 14 10 Program mode button PROGRAM MODE 9 11 11 Auto cue button AUTO CUE 18 Time mode button TIME MODE 15 7 M fp S MN LJ 9 20 QD 02 No Name _ Ref page A Spiral button SPIRAL 12 13 Random mode button RANDOM MODE 10 14 Repeat button REPEAT 15 15 Numeric butions 1 410 0 gt 10 7 8 16 Loading drawer 7 17 Stop button W 8 18 Pause
16. arm environment moisture may form on the disc Wipe this off with a soft dry lint free cloth before using the disc Do not write on the label side with a ball point pen or other writing instrument Storage precautions Be sure to store discs in their cases to protect them from dust scratches and warping Do not piace or store discs in the following places 1 Locations exposed to direct sunlight Humid or dusty locations 3 Locations directly exposed to a heat vent or heating appliance In the glove compartment or on the rear deck of an automobile Troubleshooting guide Before requesting service for this unit check the chart below for a possible cause of the problem you are experiencing Some sim ple checks or a minor adjustment on your part may eliminate the problem and restore proper operation If you are in doubt about some of the check points or if the remedies indicated in the chart do not solve the problem refer to the directory of authorized service centers enclosed with this unit to locate a convenient service center or consult your Technics dealer for instructions In U S A consult MSC Authorized Servicenters for detailed in structions Problem Probable cause s Suggested remedy A disc s or other foreign object s has fallen e Open the loading drawer and then remove the Changer will not play The disc in the changer does not play Play stops before changing to the next disc A c
17. ding tray During play the il lumination color will change to green a The changer plays all the tracks on all the discs in order and stops automatically when the last track on the last disc finishes playing The first disc will then be at the playing position OPEN CLOSE DISC SKIP To directly access a desired track 1 45 bejPress the numeric button s to select the track Track number Ir lt gt 4 C A GID c gt C To select a track between 1 and 10 Press the corresponding number on the numeric button To select a two digit track number over 10 First press gt 10 and then press the numbers for the two digits For example number 20 Press gt 10 then 2 and then O To exchange discs during play While playing a disc it is possible to change the other discs without interrupting play 1 Press OPEN CLOSE to open the loading drawer Current disc Discs which can be changed 2 Press DISC SKIP to rotate the disc trays and exchange the discs The carousel will move by one disc tray Pressing again moves the carousel in the opposite direction by two disc trays 3 Press OPEN CLOSE to close the loading drawer Note if you play a disc with the loading drawer open discs other than the current disc cannot be played TEORIE To temporarily stop play Lus Press Ol gt Poh lt gt Ce gt
18. ds When the unit is not used turn the power off When left unused for a long period of time the unit should be unplugged from the household AC outlet Installation Environment 1 Water and Moisture Do not use this unit near water for ex ample near a bathtub washbowl swimming pool or the like Damp basements should also be avoided 2 Condensation Moisture may form on the lens in the follow Ing cases e immediately after a heater has been turned on ein a steamy or very humid room e when the unit is suddenly moved from a cold environment to a warm one if moisture forms inside this unit it may not operate properly To correct this problem turn on the power and wait about one hour for the moisture to evaporate 3 Heat The unit should be situated away from heat sources such as radiators and the like It also should not be placed in temperatures less than 5 C 41 F or greater than 35 C 95 F Placement 1 Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation Allow 10 cm 4 clearance from the rear of the unit 2 Foreign Material Care should be taken so that objects do not fall into and liquids are not spilled into the unit Do not sub ject this unit to excessive smoke dust mechanical vibration or shock 3 Magnetism The unit should be situated away from equip ment or devices that generat
19. e discrandonr play vy sc cking Gi Sireenid e p te bende 10 Fall Tandon Olay resas riaa aane es A ewe ORs ae 10 Delete DIAY errriiori ea i rE 11 Using the remote control transmitter SL PD967 SL PD867 only PESMPEEE E Spral Play eerror aa omer eee 12 ID scan function 13 Search function aa 13 Skip UNCON erresen rea 14 TESKO OE an r coi a a a Aa mas rae 14 EO SKIO NACK ons aa a hear ti E A 14 Repeat function 0 15 Time mode selection aaa 15 Edit guide function 0 16 Pitch control function BAZO AIDA 17 Auto cue function BEAY AIDI 18 Reference Concerning compact discs 18 Troubleshooting guide 19 Product Service 0 ccc eee 19 Cautions concerning the moving of this unit Back cover Technical specifications Back cover This device complies with Part 15 of the FCC Rules Operation may cause undesired operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must ac cept any interference received including interference that CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential in Stallation This equipment generates uses and can radiate radio frequency energy and if not
20. e strong magnetism 4 Stacking Do not place heavy objects other than system components on top of the unit 5 Surface Place the unit on a flat level surface 6 Carts and Stands The unit should be used only with a cart or stand that is recommended by the manufacturer The unit and cart combination should be mov ed with care Quick stops excessive force and uneven surfaces may cause the unit and cart com a bination to overturn aa 7 Wall or Ceiling Mounting The unit should not be mounted to a wall or ceiling unless specified in this operating instruc tions Maintenance Clean the cabinet panel and controls with a soft cloth lightly moistened with mild detergent solution Do not use any type of abrasive pad scouring powder or solvent such as alcohol or benzine Service 1 Damage Requiring Service The unit should be serviced by qualified service personne when a The AC power supply cord or the plug has been damaged or b Objects have fallen or liquid has been spilled into the unit or c The unit has been exposed to rain or d The unit does not appear to operate normally or exhibits a marked change in performance or e The unit has been dropped or the enclosure damaged 2 Servicing The user should not attempt to service the unit beyond that described in the operating instructions All other servicing should be referred to qualified service personnel CA
21. e to cancel the program mode and use another play mode except delete play and then still use the same program play again at a later time In addition if the disc is repiaced with another one program play will be carried out using the new disc If non existing entries oc cur at this time they will be canceled For your reference The program mode and the programmed contents will remain Stored in the memory even after the unit is switched off However if the power cord is unplugged or the power supply is otherwise interrupted for an extended length of time the con tents of the memory will be erased 10 Using the remote control transmitter RECALL To confirm the programmed contents RECALL Press RECALL Each time you press RECALL the display shows the programmed disc and track number in the sequence you have entered z lt gt gt 3 C gt lt gt c gt C lt gt Programmed Programmed track order To clear a single item of the programmed contents CLEAR Press CLEAR Each time you press CLEAR you will cancel last entry in the order you have entered To clear an entry in the middle of the program sequence press RECALL repeatedly until the display shows the selection to be cleared and then press CLEAR All of the tracks will be played one time each in random order There are two types of random play as described below RANDOM MODE oe ee 868800 3
22. ep 3 2 Enter the total recording time in minutes 1 99 using the numeric buttons For example To use 52 minute tape press 5 then 2 You can also specify the tape length pressing the SKIP button Press either kd or gt P from each step C 46 C 60 C 90 or C For example To use 52 minute tape select C 46 and then press and hold P gt P until the display shows 52 The maximum allowable playing time for editing is 99 minutes To stop recording Press IJ and then press the stop button on the tape deck Depending on the disc a little of the beginning of the next track may be recorded onto the end of the track SL onl The playback pitch can be changed as desired within a range of 12 5 The tempo and the pitch of the sound will change simultaneously I 2 ree Press OFF ON OFF ON The pitch control indicator on this unit will illuminate BSR Re ORT en ca ee a a fe a le ay ee ae ey a he Sow Pere ao eat fae eS he Turn the knob in the or direction Pitch decreases Pitch increases The pitch will change while the knob is being held and the changed values will show on the display a i gt z gt ZIN lt gt c D If the knob is released the pitch will stop changing and after approximately 2 seconds the pitch display will change back to the time display Pitch changing steps The 5 9 position is a half
23. ertain music passage can t be played correctly These is noise from the tuner or disturbance on the TV screen When program play is started an error message E appears on the display An error message E appears on the display and the changer stops operating The loading drawer stops in the middle of opening inside the changer Moisture has collected in the changer The disc is upside down The disc is dirty The disc is scratched The disc is warped The disc is not within specified standards The loading drawer is open The disc is dirty The disc is scratched Caused by high frequency signals from this changer Play was started without a track being programmed The mechanism of the changer has been improperly adjusted Product service Do not attempt to remove the cover s or repair the unit yourself Refer servicing to qualified personnel only Product information For product service product information or assistance in pro duct operation refer to the servicenter directory object e Switch on and allow the changer to dry out for about one hour before using it e Make sure the label is facing upward e Wipe the disc with a soft cloth Replace the disc with a new one Press the OPEN CLOSE button to close the loading drawer e Wipe the disc with a soft cloth e Replace the disc with a new one e Use the changer further away f
24. installed and used in accor dance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or televi sion reception which can be determined by turning the equip ment off and on the user is encouraged to try to correct the in terference by one of the following measures Reorient or relocate the receiving antenna eincrease the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Any unauthorized changes or modifications to this equipment would void the user s authority to operate this device CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE SCREWS NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the produc
25. net Ley CEPTEN wrath Wee yan tle ort O F fs I ERA a a peaa AE nata C Pe Ley SJL Ls gt F Coot a a es a Sa eee lee Ooomonowowooocrs age lt a SEARCH gt gt In the play or pause mode Press and hold d4 or gt P lt q You can search backward gt P You can search forward Release the button when you reach the desired point The changer will return to the previous mode play or pause In sequential play mode You can search forward over discs and backward within the cur rent disc In other play modes You can search forward or backward only within the current track For your reference The search function will begin slowly and then if the button is held pressed for longer than 3 seconds it will change to high speed search In the play mode the sound level decreases by 12 dB 1 4 13 14 To skip discs Use this function to skip discs when selecting a disc to which you wish to listen and when loading and unloading the discs DISC SKIP PORE oe eee eer ak eee nl bR CICAMOOIcat aco oat ae yee ee apr pe t r You can use this function in stop sequential play one disc ran dom play and delete play modes DISC SKIP Press DISC SKIP to rotate the disc tray Disc number at the playing position In stop mode When the loading drawer is closed pressing DISC SKIP changes the disc tra
26. ng played If you press this button again quickly you can skip to the beginning of the previous track Remember that in a backward skip the current track is in cluded in the count Pi You can skip as many tracks as the number of times you press the button In random play mode lt q You can skip to the beginning of the current track PP You can skip to the beginning of a next track in random order In spiral play mode Hdd You can skip to the beginning of the current track Bl You can skip to the beginning of the track on the next disc You can also skip tracks when the changer is in the stop mode except during random play and spiral play or pause mode Repeat jon Play will continue endlessly in accordance with the specific play mode selected REPEAT Sg PEERS CO0C0 O a a E u n gt oe TC aC Lae Ifo G oaa E ma A m A a G C1 g o 4 REPEAT Before or during play Press REPEAT mS lt gt gt lt i gt C gt DISC E l drna Illuminates In sequential play mode All tracks of all discs will be played repeatedly In program play mode The changer plays only the programmed selections in the pro grammed sequence repeatedly In delete play mode The changer plays the discs and tracks excluding the selections to be deleted repeatedly In random play mode When the changer has played all the tracks on all the loaded discs it will select a
27. nly repeat the above operation The count will in crease by one for each operation 3 Press the numeric button s gt o 19 to specify the track number C141 SCO CC For example To select track number 20 press gt 10 then 2 and then 0 j l f him no aedi track af Bea order se sassasrysyryvvn asuvaa aaa ooo evka Repeat steps 2 and 3 until you have completed the desired entry If you enter non existing disc s or track s soon after the loading drawer is closed or when it is open the corresponding indicator illuminates and the entry is included in the count In the play mode the changer will cancel the non existing entry cy D EIN i ts osc Hirak No cp cp If you attempt a 33rd selection the F full indica tion will be displayed Press to start play To enter additional selections during play repeat steps 2 and 3 gt I G ay ee a i 1 gt DISC f FLL TRACK MIN gt ta PGH To clear the entire programmed contents In the stop mode Press W The ERN will indicate as below j ma I 7 i p i i Ji L DISC A TRACK No To cancel program mode PROGRAM MODE In the stop mode Press PROGRAM MODE twice The changer will return to sequential play mode The programmed contents will remain stored in the memory until they are cleared even after the program mode is canceled Therefore after using program play it is possibl
28. ower supply is otherwise interrupted for an extended length of time the con tents of the memory will be erased 1l Using the remote control transmitter BEAST RECALL To confirm the selections to be deleted RECALL Press RECALL Each time you press RECALL the display shows the selected disc and track number in the sequence you have entered cl gt OT Gd c gt gt L E i l d brae No l DEL Track to be deleted Order you have entered To clear a selection to be deleted CLEAR Press CLEAR Each time you press CLEAR you will cancel last entry in the order you have entered To clear a selection in the middie of the se quence press RECALL repeatedly until the display shows the selection to be cleared and then press CLEAR 12 The changer plays the first tracks on all the loaded discs in se quence followed by the second tracks on all the discs and so on Refer to the illustration below SPIRAL abo oppi sti ugi De t y gt th oan a t O00000 gt j I 7 Orn er oe S oes ES Mmoncmmmcmowowmecrny een cit ee Example When starting from disc 1 Spiral play Track 1 Track 1 SPIRAL In the stop or play mode Press SPIRAL Spiral play will begin with the first track on the disc situated at the playing position a et ae C Gr
29. rom the tuner or TV elf the tuner or TV s antenna is the indoor type use an outdoor one a M e Program a track e Turn the unit off and then back on again However if the loading drawer is fully open take out the compact disc s at the front position and then turn the unit off and then back on again AAR E 19 Cautions concerning the moving of this unit if CAUTION Before moving the changer to another location be sure to carry out the Preparations for moving the unit described below Failure to do so will expose the compact discs and the changer to the risk of severe damage Preparations for moving the unit All of the discs must be removed so that the trays are completely empty Use the following procedure 1 Press POWER to switch off the unit 2 Press POWER to switch on the unit If there ts a disc in the play section it will be returned to the disc tray at this time 3 Press OPEN CLOSE to open the loading drawer 4 Press DISC SKIP to rotate the disc trays and remove the discs from all disc trays 5 Press OPEN CLOSE to close the loading drawer 6 Press POWER to switch off the unit If you have pressed a wrong button by mistake return to step 1 POWER DISC SKIP i Cit a ae ae et ae eee Jl g j i HL ah J l OPEN CLOSE Panasonic Company Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus New Jersey
30. t s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral tri angle is intended to alert the user to the presence of important operating and maintenance ser vicing instructions in the literature accompanying the appliance Before using this unit please read these operating instructions carefully Take special care to follow the warnings indicated on the unit itself as well as the safety suggestions listed below Afterwards keep them handy for future reference Safet yo 1 Power Source The unit should be connected to power sup ply only of the type described in the operating instructions or as marked on the unit 2 Polarization f the unit is equipped with a polarized AC power plug a plug having one blade wider than the other that plug will fit into the AC outlet only one way This is a safe ty feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug 3 Power Cord Protection AC power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them Never take hold of the plug or cord if your hand is wet and always grasp the plug body when connecting or disconnecting it 4 Nonuse Perio
31. y to the next one When the loading drawer is open pressing DISC SKIP moves the carousel by two disc trays In play mode When the loading drawer is closed pressing DISC SKIP changes the disc and the changer plays the track on next disc lf a disc is not on the selected disc tray the changer plays the disc at the next number When the loading drawer is open pressing DISC SKIP moves the carousel by one disc tray Pressing again moves the carousel in the opposite direction so that you can change all discs except the one being played To skip tracks Use this function to skip tracks when selecting a track to which you wish to listen a SKIP gt P OES Ca S Se ee cams ems come ces ces J es J wees eee je es COn aa skip gt gt Press either SKIP d lt or PI un til you reach the desired track Id You can skip backward PP You can skip forward gt 5 E Ppt Cri CECA E beta I n DISC TRACK MIN SEC gt c gt 1 a Track number at the playing position In sequential program delete play mode In sequential play mode you can skip only within the current disc In program play mode you can skip from one track to another in the programmed sequence In delete play mode you can skip tracks only within the current disc excluding the tracks to be deleted lda You can skip to the beginning of the track bei
Download Pdf Manuals
Related Search