Tatung TVA-171 User's Manual
Contents
1. VA 171 Use screws 4 to install LCD monitor on the Teinien VESA adapter 1 If necessary take off ABS caps then tighten or loosen adjustable screw set 6 so the monitor can swivel freely and stay at desirable angle firmly When adjustment done put 4 ABS caps back This end horizontal TATUNG COMPANY OF AMERICA INC 2850 EL PRESIDIO ST LONG BEACH CA 90810 TEL 310 637 2105 FAX 310 631 4758 Pole Mount Kit TPM 155 daa T RIVI EW Installation Instruction j Ww LISTED Because pole situation vary from job to job it is mandatory that you consult with the appropriate local engineer and architect to ensure that the mounting brackets are properly mounted to handle the applied loads Pole must be made of metal material and applicable pole diameter is 1 5 2 0 inch Maximum load 16 Ib monitor TLM 1503 TLM 1505 and TLM 1703 recommended Do not use over force on the screws during installation THIS MOUNT KIT USED FOR LCD MONITOR THAT VESA STANDARD IS 75MM 1 Parts in the assembly 1 Dual pivot assembly 1 assy 2 Pole plate 1 piece To Back of 2 1 Stainless steel strap 2 pcs Monitor 3 Screws hex head phillips 1 4 20 16mm L 4pcs R 4 Screws hex head phillips M4x0 7 12mm L 4pcs 5 ABS caps included in assembly 1 6 Adjustable screw set included in assembly 1 2 Tools needed Wrench Screw driver 3 Installation a Use two stainless steel straps 2 12. ss TRIVIEW TVA 171 VESA ADAPTER Aus Installation Instruction LISTED TVA 171 VESA ADAPTER used for LCD monitor mounted on the wall or pole when monitor VESA standard is 100mm It needs to be assorciated with dual pivot kit NOTES For Wall Mount TVA 171 with TWM 155 For Pole Mount TVA 171 with TPM 155 Read the Instruction of TWM 155 and TPM 155 throughly before installation Compatible LCD monitors TLM 1505 TLM 1705 and TLM 1707 TVA 171 TWM 155 1 Components in the assembly 1 VESA Adapter TVA 171 2 Screws M4 10mm long pan head phillips 4 pieces 3 Screws M4 12 mm long pan head phillips 4 pieces monitor 2 Tools needed Wrench Screw driver 3 Installation Wall Mount Install Wall Mount Kit TWM 155 onto the wall vertical surface refer to the Installation Instruction of TWM 153 Consult with local engineer for proper mount Use screws 3 to install VESA adapter 1 on 2 Use screws 4 to install LCD monitor on the VESA adapter 1 If necessary take off ABS caps then tighten or loosen adjustable screw set 6 so the monitor can swivel freely and stay at desirable angle firmly When adjustment done put 4 ABS caps back This end horizontal Pole Mount Install Pole Mount Kit TPM 155 onto the wall vertical surface refer to the Installation Instruction of TWM 153 Consult with local engineer for proper mount Use screws 3 to install VESA adapter 1 on 2 T
3. to install Pole rem plate 2 onto pole applicable pole diameter 1 5 2 2 Consult with local engineer for proper mount This end b Use screw 3 to install Dual pivot assembly 1 on horizontal the Pole plate 2 along the proper direction refer to right illustration Do not use over force fastening screws gently c Use screws 4 to install LCD monitor on the Dual pivot assembly 1 d If it is necessary to adjust the screw set 6 first take off ABS caps then tighten or loosen it until the monitor can swivel freely and stay at desirable angle firmly e When adjustment done put 4 ABS caps back To take off ABS caps from Dual pivot assembly first move the cap along the direction A until touching the metal plate then pull the cap up along the direction B refer to the figure below Similarly steps for rest caps Reverse the above steps for installing the caps back Dual pivot Assembly TATUNG COMPANY OF AMERICA INC 2850 EL PRESIDIO ST LONG BEACH CA 90810 TEL 310 637 2105 FAX 310 631 4758
Download Pdf Manuals
Related Search