Tascam US-224 User's Manual
Contents
1. US 224 disconnected you can remove the driver files themselves by deleting them from their folders NOTE These discussions all assume that the root of the Win2K installation is in c winnt Delete the following files from winnt system32 drivers o US224 sys o US224DL sys o US224Wdm sys Delete the following files from winnt system32 o U224 A16 DLL o U224 A24 DLL o US224cp CPL Delete the following files from winnt inf The oemxX inf and oemX pnf files X 0 1 2 which refers to the US 224 Use the Windows Find utility to determine which files contain the string US 224 o remove registry entries you need to use RegEdt32 rather than regedit Relevent entries HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Enum US428 FDG0005 HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Enum USB Vid_1604 HKEY_ LOCAL_MACHINE SYSTEM CurrentControlSet Services US224 HKEY_ LOCAL_MACHINE SYSTEM CurrentControlSet Services US224DL HKEY_ LOCAL_MACHINE SYSTEM CurrentControlSet Services US224Wdm Service2. TASCAM a whole world of recording PERFORMING A CLEAN UNINSTALL OF THE US 224 WINDOWS 2000 WINDOWsS XP Under some troubleshooting or update circumstances users may want to reproduce a fresh installation condition on a particular PC In other words you will want the computer to be in the state it was in before a US 224 was installed for the first time Uninstall procedure There are several procedures for removing the drivers depending on how much you want the machine to resemble the state before the us224 was first seen First note that under Windows 2000 USB devices are plug and play which means that the device drivers for the unit are not loaded into memory until the hardware is recognized by the USB host controller when the US 224 is plugged in and turned on Therefore if you suspect a conflict between the US 224 and another device restarting the computer with the US 224 disconnected will keep the US 224 s drivers from loading In short you don t necessarily have to go through one of the procedures below to test for such conflicts To uninstall the US 224 you can also use Device Manager which is located in Control Panel System Hardware Device Manager There will be two entries under Sound video and game controllers for the US 224 They are labeled TASCAM US 224 and US 224 WDM Interface You should be able to remove both by right clicking the TASCAM US 224 entry and choosing Uninstall Finally with the
Download Pdf Manuals
Related Search