Tangent Audio Internet Radio Quattro MKII User's Manual
Contents
1. 6 Press the SELECT button Choose between 24 hour format and 12 AM PM format Confirm your selection by pressing the SELECT button Clock Format 24 12 7 Turn the TUNE knob until the display says lt Set Time gt 17 lt Set Time Date gt 8 Press the SELECT button Set Time 9 Turn the TUNE knob until the hour setting is correct then press the SELECT button Set Time 15 03 10 Turn the knob until the minute setting is correct then press the SELECT button Time Set 15 06 The display says Time Set with the new time shown beneath for 3 seconds then returns to the radio station display Setting the alarm 1 Press the ALARM button Note if you make a mistake at any point press the BACK button to go back to the previous screen 2 Turn the TUNE knob until the display says lt Set Alarms gt lt Set Alarms gt 3 Press the SELECT button lt 1 OFF 00 00 Sunday gt 4 Turn the knob to swap between lt 1 gt lt 2 gt lt 3 gt lt 4 gt lt 5 gt and lt Disable all gt and press the SELECT button If you choose lt Disable all gt then the alarms will be turned off The display says All Alarms disabled for 3 seconds then returns to the radio station display All Alarms disabled 5 If you choose one of the numbers between 1 and 5 then the display enables you to set the time for the alarm Set Alarm 15 06 6 Turn the TUNE knob until the hour setting is correct then press the SELECT button 182. section on the website 3 Once you have Internet stations available in your My Stations list you may play these stations from your Internet Radio These stations will be available on your radio from the menu item Stations gt My Stuff gt My Stations Please note the stations will only be available to your radio once your radio has downloaded a new stations list To cause the radio to download a new stations list immediately please remove and reconnect the power to your radio 31 Configuring My Streams 1 Once logged into your Reciva website account you can add your own Internet radio streams to the My Streams section which is listed under the My Account section Clicking on My Streams will prompt you to enter the station s name and its media stream URL The media stream URL should be a link to a website s actual audio stream If you have any doubt about locating the media stream URL from a webpage then please refer to the FAQs section on Reciva s website http www reciva com Once you have Internet radio streams available in your My Streams list you may play these stations from your Internet Radio These stations will be available on your radio from the menu item Stations gt My Stuff gt My Streams Please note the streams will only be available to your radio once your radio has downloaded a new stations list To cause the radio to download a new stations list immed
3. Player Quickstart Guide The Media Player allows you to play audio files AAC AIFF AU MP3 RM WAV and WMA and playlists M3U stored on a networked PC It has been verified to work on Windows 2000 and Windows XP Set up your Windows PC to allow the radio to access your audio files via Windows Shares i Or oe Please ensure that your PC is available on the network for your Internet radio then using Windows Explorer locate the folder where your audio files are stored Right click on the folder Select Properties Click on Sharing Select Share this folder on the network and Allow network users to change my files Please note do not try to make your My Documents or any of its sub folders e g My Music shareable Locate the shared audio files using the radio 1 2 3 4 Power up the radio Wait for Stations to be displayed on the radio or press the BACK button repeatedly until Stations is displayed Turn the knob until the radio display shows Media Player Press the SELECT button and turn the TUNE knob until Windows Shares is displayed Press the SELECT button turn the TUNE knob until Scan for PCs is displayed and press SELECT again The radio will now display Finding PCs Once the radio has finished turn the TUNE knob to highlight the correct PC Press the SELECT button The radio will search for shared folders Turn the TUNE knob to h
4. SELECT button Note if you make a mistake at any point press the BACK button to go back to the previous screen Turn the TUNE knob until Configure is displayed Press the SELECT button Turn the TUNE knob until the display shows the option you want Press the SELECT button to choose the option shown on the display The options are explained below ARS lt Network Config gt Enables you to scan again for connection to another wireless network or to manually configure the network parameters Use this if you take the Internet radio to another building where you want to use it The Network Config menu also allows you to choose whether or not the Internet radio displays a warning message when its network signal strength is low You can enable this feature by selecting Signal Warning and then selecting Yes lt Version gt Displays the versions numbers of the various parts of software and hardware on your Internet radio lt Upgrade Firmware gt Use this option to download new firmware for the radio from the Reciva portal on the Internet If there is new firmware available then the radio will prompt you if you want to download it or not Note at this stage you can press the radio s BACK button to cancel the radio beginning a firmware upgrade A Firmware upgrade may take several minutes so do NOT switch off the power to the radio until the operation is complete otherwise the radio may become permanently damaged 29 lt
5. Set Alarm 07 06 7 Turn the TUNE knob until the minute setting is correct then press the SELECT button Alarm Set 07 45 8 Turn the TUNE knob to choose between ONCE EVERY DAY WEEKLY WEEKDAYS and WEEKENDS e f you choose ONCE you must choose which weekday you want the alarm to be active Confirm your choice by pressing SELECT Then you must choose if you want the alarm to be a buzzer the radio station that you are currently listening or a radio station assigned to a preset Confirm your choice by pressing SELECT The display will show lt Alarm set gt lt Once gt e If you choose EVERY DAY the alarm will start all days of the week on the selected time Confirm your choice by pressing SELECT Then you must choose if you want the alarm to be a buzzer the radio station that you are currently listening or a radio station assigned to a preset Confirm your choice by pressing SELECT The display will show lt Alarm set gt e If you choose WEEKLY the alarm will start every week on the day you will select after woods Confirm your choice by pressing SELECT Then you must choose if you want the alarm to be a buzzer the radio station that you are currently listening or a radio station assigned to a preset Confirm your choice by pressing SELECT The display will show lt Alarm set gt lt Weekly gt e If you choose WEEKDAYS the alarm will start Monday through Friday every week on the selected time Confirm your choice b
6. radio mode and AUX input Back This button allows you to go back in menus Select Press this button to confirm your choices in menus etc Connections tangent THE OBJECTIVE OF EVERY TANGENT PRODUCT IS THAT FUNDAMENTALLY CORRECT DESIGN CAN PRODUCE A PRODUCT CAPABLE OF ACHIEVING EXCELLENT PERFORMANCE AND AFFORDABILITY ee LINE OUT 6 WARRANTY VOID IF UNIT OPENED 12V DC in For connecting the included 12V DC power supply Line out For connecting the radio to an external amplifier Headphone out For connecting headphones AUX in For connecting an external sound source like a MP3 player Mobile phone CD player etc Ethernet RJ 45 Use the input for connection if you would like to intergrade the Tangent Quattro to your network via a wired connection FM antenna This antenna is used to obtain the best possible reception on the built in FM tuner Steps for connecting your radio to your wireless network Step 1 Power up the radio Plug the cable from the mains adapter into the socket labelled 12V DC on the back of the radio CAUTION Use only the mains adapter supplied with the radio Connecting a power supply with a different rating will cause permanent damage to the radio and may be hazardous The display on the front of the radio will light up and say Tangent Quattro ARM powered After a few seconds this will change to show lt Scan for networks gt Step 2 Scan for a wireless network connecti
7. tuned into and turning it anticlockwise will decrease the frequency Press and hold down the SELECT button to allow the radio to search for working FM frequencies that it can detect The radio will continue to scan through all its available FM frequencies until it finds one that is used by a working station To save an FM frequency to the radio s memory press and hold down a preset button in the same way that you would save an Internet Station to a preset To access a saved FM frequency simply press the preset button assigned to the saved frequency Changing the volume Whilst a radio station is playing and is displayed on the radio s screen you can change the volume simply by turning the VOLUME knob This button will be active at all times Returning to the menu while a station is playing When the Internet radio is playing a radio station it will display the station s name and bit rate You can return to the radio s menu section at any time by either pressing the SELECT button which will take you to the Stations menu or the BACK button to return to the previous menu item 15 Storing a radio station in a preset Whilst a radio station is playing hold down one of the preset buttons numbered 1 to 6 until the screen says Assigned to Preset Where is the number of the button you held down Playing a preset radio station When a radio station is playing briefly press one of the preset buttons 1 to 5 for the sta
8. Language gt Allows you to change the display language lt Factory Reset gt Puts all the settings back to their defaults as they were when they left the factory If you perform a factory reset on your radio you will lose all your presets and your wireless network connection lt Register gt This will display a key that can be used to register the radio on the Reciva Customer portal http www reciva com lt Clock setup gt Use this option to set the time to set an alarm and to view the current alarm setting see Setting the clock Setting the alarm lt Backlight gt Selecting this option will alter the Internet radio s backlight values 1 After selecting the Backlight menu item the radio will display its list of three menu modes Inactive Active and Standby These three states are explained below e The radio gets into its inactive state when there is no user activity for 30 seconds e The active state is when there is user activity e Standby is the state when the radio has been turned off 2 Rotate the TUNE knob to highlight the desired menu mode and press SELECT 3 The radio will now display the current backlight value for this menu mode You can alter this value by rotating the knob to increase or decrease it lt Wifi Strength gt Use this option to see the signal strength between your Quattro radio and your wireless access point 30 Configuring My St
9. ake at any point press the BACK button to go back to the previous screen lt Stations gt 2 Turn the TUNE button until the display says lt Configure gt and press SELECT to confirm lt Configure gt 3 Turn the TUNE button until the display says lt Network Config gt and press SELECT to confirm lt Network Config gt 12 4 Turn the TUNE button until the display says lt Wired Wireless gt and press SELECT to confirm lt Wired Wireless gt 5 Now it is possible to choose between Auto Wired Only and Wireless Only Choosing a radio station to listen to i Press the SELECT button to return to the top level menu Note if you make a mistake at any point press the BACK button to go back to the previous screen 2 Ifthe screen does not say lt Stations gt as shown above turn the TUNE knob until it does 3 Press the SELECT button 4 Turn the knob to choose from lt Location gt lt Genre gt or lt Search gt lt Location gt enables you to choose from the radio stations provided by any country which you choose from a list lt Genre gt enables you to choose radio stations according to their content for example Classic Rock Sport News etc lt Search gt enables you to enter a name or parts of a name of a station and the radio will then find the station for you 5 Press the SELECT button to choose the option you want lt Location gt 1 Turn the TUNE knob until the display s
10. ats Controls Speaker System Output Connections Power Frequency range Dimensions Weight 802 11b g WEP WPA1 TKIP and WPA2 TKIP Real audio MP3 Windows media streams OGG vorbis AAC WAV AIFF and AU Power button Volume knob Tuning knob Alarm button Mode button Back button 6 Browse button 5 Stop button Reply button 4 Shuffle button 3 Next button 2 Play button 1 Prev button and Snooze button Full range dynamic speaker 3 5 Watt RMS 3 5mm jack for stereo analog audio headphone output 3 5mm jack for stereo analog audio AUX input 3 5mm jack for stereo analog audio Line output RJ 45 connecter for wired LAN connection 12 V DC input DC 12 V 80 20 000Hz 210 x 111 x 145mm W x H x D 2 40Kg Power supply and radio 35 tangent quattro V ME a RADIO LEBANON 20 KBPS UNA j www tangent audio com Item no 40510 02 X
11. continue make sure that your wireless access point is powered up and connected to your broadband Internet To get this part of the system working you must read the instructions supplied with the wireless access point Controls tangent quattro VOLUME POWER RADIO LEBANON 20 KBPS una 3 Next 4 Shuffle 5 Stop RECIVA Power Press this button to turn on and off the radio Volume Turn this button clockwise to turn up the volume and counter clockwise to turn down the volume Tune Turn this button to navigate in menus and between channels 1 Prev This button selects the previous track during media player mode In radio mode it selects preset number one 2 Play This button starts playback during mediaplayer mode In radio mode it selects preset number two 3 Next This button selects the next track during media player mode In radio mode it selects preset number three 4 Shuffle This button starts shuffle mode in media player mode In radio mode it selects preset number four 5 Stop This button stops playback during media player mode In radio mode it selects preset number five 6 Browse This button allows you to browse the shared files during media player mode In radio mode it selects preset number six Reply For future interactive features See www reciva com for further information Alarm This button gives you access to the alarm menu after pressing the SELECT button Mode This button changes between
12. firm that repeat mode should be enabled Set up a Windows PC to allow the radio to access your audio files via a UPnP server 1 If your PC is running Microsoft Windows XP then you can use Windows Media Player 11 WMP11 to act as your UPnP Universal Plug and Play media server 1 0 Windows Media Player 11 may be downloaded from Microsoft s website and installed by following the instructions detailed in its installation wizard Once installed Windows Media Player 11 will create a library from all the media files available to it on your PC To add new media files to the library select File gt Add to Library gt Advanced Options click Add and choose the files you wish to add and click OK You will now need to connect your Internet radio to Windows Media Player 11 and configure it to allow the radio to access your media library In order to this you will need to do the following e Keep pressing BACK to get to the radio s top level menu and then turn the TUNE knob to select Media Player e Press SELECT and then turn the TUNE knob to highlight UPNP Servers 24 Press SELECT and the radio will scan for all available UPnP servers Note this may take a few seconds for the radio to complete its scan and before the scan has completed the radio will display Empty The radio will continue to display Empty if no UPnP servers are found After a successful scan select your UPnP server by rotating
13. for the network If the problem persists then you may need to consult your network configuration If your radio can connect to the network successfully but is unable to play particular stations it may be due to one of the following causes 1 2 3 4 D The station is not broadcasting at this time of the day remember it may be located in a different time zone The station has reached the maximum allowed number of simultaneous listeners The station is not broadcasting anymore The link on the radio is out of date The Internet connection between the server often located in a different country and you is slow Try using a PC to play back the stream via the broadcaster s web site 33 If you can play back the station with a PC use the form at http www reciva com to notify us so that we can change the station data that is used by the radio Software licence information This product contains software licensed under version 2 of the GNU Public License and version 2 1 ofthe GNU Lesser Public License The source code for this software is available from http www reciva com gpl This product includes technology owned by Microsoft Corporation and under a licence from Microsoft Licensing GP Use or distribution of such technology outside of this product is prohibited without a license from Microsoft Corporation and or Microsoft Licensing GP as applicable 34 Specifications Connection Security File form
14. gs UM Unknown Device How does sharing change firewall settings Locating and playing media files using the radio and UPnP 1 Once the UPnP server is configured to share media files with the Internet radio you can play the files by doing the following on the radio 2 Keep pressing BACK to get to the radio s top level menu and then turn the knob to select Media Player 3 Press SELECT and then turn the TUNE knob to highlight UPNP servers 4 Press SELECT and the radio will scan for all available UPnP servers Note this may take a few seconds for the radio to complete its scan and before the scan has completed the radio will display Empty The radio will continue to display Empty if no UPnP servers are found 5 After a successful scan select your UPnP server by rotating the knob if there is more than one UPnP server and then press SELECT 6 The radio will now list the media categories available from the UPnP server e g Music Playlists etc Turn the TUNE knob to select which category you wish to browse press SELECT and turn the TUNE knob 26 to highlight a sub category and press SELECT again For example you could select Music and then Album Turn the TUNE knob to highlight the media files that you wish to play and press SELECT The radio will display Add to Queue press SELECT and the radio will add the tracks to its queue and begin playing them automat
15. hows lt Search gt then press the SELECT button 2 Turn the TUNE knob to enter the name of the station you would like to find Confirm each letter with the SELECT button Select END and press the SELECT button The radio will find the stations that matches your search criterias Turn the TUNE button to select your preferred station Press the SELECT button and wait until the radio connects to that station Note that some radio stations do not broadcast 24 hours per day and some stations are not always on line lf this station has on demand content that is it gives the option of listening to programmes which have already been broadcast see Stations which enable you to choose what you listen to er 14 Using your radio for tuning into FM stations Your radio supports an FM tuner with RDS so you will be able to access standard FM stations from it 1 You can access the radio s FM tuner by pressing the Mode button twice pressing the button once will cause the radio to play audio from its auxiliary input Pressing the Mode button a third time will cause the radio to leave its FM tuner state and become and Internet radio again You can also access the FM tuner by selecting the Tuner menu item from the radio s main menu Whilst the radio is in its FM tuner state it will display what FM frequency it is currently tuned into Turning the rotary encoder clockwise will increase the FM frequency the radio is
16. hows the region you want 2 Press the SELECT button 3 Turn the TUNE knob until the display shows the country you want 4 Press the SELECT button 5 Turn the TUNE knob to choose between All Stations or By Genre 6 Pressthe SELECT button 7 Turn the TUNE knob until the display shows the station you want to listen to 13 8 Press the SELECT button and wait until the radio connects to that station Note that some radio stations do not broadcast 24 hours per day and some stations are not always on line If this station has on demand content that is it gives the option of listening to programmes which have already been broadcast see Stations which enable you to choose what you listen to lt Genre gt 1 Turn the TUNE knob until the display shows the type of content you want then press the SELECT button 2 Turn the TUNE knob to choose between All Stations or By Location 3 Press the SELECT button 4 Turn the TUNE knob until the display shows the station you want to listen to 5 Press the SELECT button and wait until the radio connects to that station Note that some radio stations do not broadcast 24 hours per day and some stations are not always on line If this station has on demand content that is it gives the option of listening to programmes which have already been broadcast see Stations which enable you to choose what you listen to lt Search gt 1 Turn the TUNE knob until the display s
17. iately please remove and reconnect the power to your radio 32 Troubleshooting If you experience any trouble with your wireless Internet radio then you may find it useful to visit the help section on our webpage http www reciva com If you have trouble connecting the radio to your wireless network these steps may help to resolve the problem k 2 Confirm that a Wi Fi connected PC can access the Internet i e can browse the web using the same network Check that a DHCP server is available or that you have configured a static IP address on the radio You can configure a static IP address on the radio using the menu item Configure gt Network Config gt Edit Config and then select No for Auto DHCP Check that your network s firewall is not blocking any outgoing ports As a minimum the radio needs access to UDP and TCP ports 80 554 1755 5000 and 7070 Check your access point does not restrict connections to particular MAC addresses You can view the radio s MAC address using the menu item Configure gt Network Config gt View Config gt MAC address If you have an encrypted network check that you have entered the correct key or passphrase into the radio Remember that text format keys are case sensitive If when attempting to connect to an encrypted network your radio displays Wireless error followed by a 5 digit number then please ensure that you enter the correct passphrase
18. ically Browsing the list of tracks currently queued up for ae tage Press the BROWSE button The currently playing track name will be displayed Turn the TUNE knob to see which tracks are queued up for playback If you want to jump to a particular place in the queue then press the SELECT button when the required track is displayed It is important to note here that media files scanned from the radio s Windows Shares function can also be added to the radio s queue Queuing up UPnP tracks for playback later 1 2 Highlight the required track Press the SELECT button Track Added To Queue will be displayed Queuing up albums for playback later 1 2 3 4 Highlight the required album Press the SELECT button Turn the TUNE knob until Add To Queue is displayed Press the SELECT button Tracks Added to Queue will be displayed playback 3 Use the STOP button to stop playback Use the PLAY button to either pause a currently playing track or to restart a currently paused track or to restart a stopped track Use the 1 PREV button to start playback of the previous track in the queue Use the 3 NEXT button to start playback of the next track in the queue 27 Removing tracks from the queue if Press the BROWSE button The currently playing track name will be displayed Turn the TUNE knob to select the track you want to remove from the queue Press and hold the STOP bu
19. ighlight the correct shared folder and press SELECT The radio will display File Scan as it scans through the media files in the shared folder Text on the bottom row of the display will change to indicate that the file scan is in progress If you have a large number of audio files this could take several minutes to complete 21 10 Once the radio has finished scanning it will display By Album You can now browse through the scanned media files which will now be organised By Album By Artist and Playlists if available Note that the first time the file scan is done a file called reciva_media_cache is written to the folder where the audio files are stored This is in order to speed up subsequent file scans Note You may be required to enter the user name and password of the computer containing the shared files Listening to a single shared track 1 Turn the TUNE knob until By Artist is displayed Press the SELECT button Turn the TUNE knob until the required artist is displayed Press the SELECT button Turn the TUNE knob until the required album name is displayed Press the SELECT button Add to Queue will be displayed Turn the TUNE knob until the required track is displayed Press the SELECT button The track will begin playing NAD Listening to a complete shared album 1 Turn the TUNE knob until By Artist is displayed Press the SELECT button Turn the TUNE knob until the requ
20. ired artist is displayed Press the SELECT button Turn the TUNE knob until the required album name is displayed Press the SELECT button Add to Queue will be displayed Press the SELECT button The album will begin playing EEE ID Queuing up tracks for playback later 1 Highlight the required track 2 Press the SELECT button Track Added To Queue will be displayed Queuing up albums for playback later 1 Highlight the required album 2 Press the SELECT button 3 Turn the TUNE knob until Add To Queue is displayed 4 Press the SELECT button Tracks Added to Queue will be displayed 22 oe playback Use the 5 STOP button to stop playback Use the 2 PLAY button to either pause a currently playing track or to restart a currently paused track or to restart a stopped track 3 Use the 1 PREV button to start playback of the previous track in the queue 4 Use the 3 NEXT button to start playback of the next track in the queue Browsing the list of tracks currently queued up for PP Press the 6 BROWSE button The currently playing track name will be displayed 2 Turn the TUNE knob to see which tracks are queued up for playback 3 If you want to jump to a particular place in the queue then press the SELECT button when the required track is displayed Removing tracks from the queue 1 Press the 6 BROWSE button The currently playing track name will be displayed 2 Turn the TUNE knob to select
21. on When the display says lt Scan for networks gt press the SELECT button Note if you make a mistake at any point press the BACK button to go back to the previous screen The radio will now scan for all available wireless networks and will display Scanning MIETIN If it can t find one then the display will say No Wireless Networks Found lf this happens then you will have to get your wireless access point working see the instructions supplied with it When the radio finds your wireless network it displays the ESSID for the access point on the screen this is a name that is allocated to the access point by the person who set up the network for example 10 lt MyHome Network gt It is possible and in some locations highly likely that your radio will find more than one wireless access point in which case you can choose which one you want to connect to Turn the TUNE knob on the radio to see the ESSID for each access point the radio has found Step 3 Connect to the wireless network When the ESSID for the access point you want to connect to is displayed on the screen press the SELECT button If your network is not configured to need an encryption code the screen should say Connecting to network Then Network OK If the screen displays either Enter WEP key Enter WPA key Then the network is using one of the encryption systems Wired Equivalent Privacy WEP or Wi Fi Protected Access WPA You therefore need
22. r the display may show a list of days for you to choose from use the TUNE knob to set the day the programme was broadcast then press the SELECT button 4 After you have chosen the day you may be able to choose the Start Time Set the Start Time using the TUNE knob and press the SELECT button 5 Programmes which enable you to choose the time also enable you to fast forward and rewind to the part you want while the radio is playing When you press the 1 PREV or 3 NEXT button the elapsed time that the programme has been playing is displayed You can now turn the TUNE knob to change this time You can also use the 1 PREV or 3 NEXT buttons to adjust the time When you press the SELECT button again the programme will play from that point 6 Once the Internet radio is playing a programme that allows you to choose its start time the radio s preset buttons become playback control buttons for the stream e g you can press 2 PLAY at any time to pause the stream and then press PLAY to resume playing Setting the clock 1 Press the SELECT button Note if you make a mistake at any point press the BACK button to go back to the previous screen 2 Turn the TUNE knob until the display says lt Configure gt lt Configure gt 3 Press the SELECT button 4 Turn the TUNE knob until the display says lt Clock setup gt lt Clock Setup gt 5 Turn the TUNE knob until the display says lt Clock Format gt lt Clock format gt
23. tangent 4 UK USER MANUAL Contents Internet Radio Quickstart Guide What you need before you can use your Internet radio Controls Connections Steps for connecting your radio to your wireless network Step 1 Power up the radio Step 2 Scan for a wireless network connection Step 3 Connect to the wireless network Steps for connecting your radio to your wired network Choosing a radio station to listen to lt Location gt lt Genre gt lt Search gt Using your radio for tuning into FM stations Changing the volume Returning to the menu while a station is playing Storing a radio station in a preset Playing a preset radio station Requesting a station that is currently unavailable Stations which enable you to choose what you listen to Setting the clock Setting the alarm Setting the sleep timer Media Player Quickstart Guide Set up your Windows PC to allow the radio to access your audio files via Windows Shares Locate the shared audio files using the radio Listening to a single shared track Listening to a complete shared album Queuing up tracks for playback later Queuing up albums for playback later Controlling playback Browsing the list of tracks currently queued up for playback 23 Removing tracks from the queue 23 Playing tracks in random order 23 Playing tracks in the queue repeatedly 24 Set up a Windows PC to allow the radio to access your audio files via a UPnP server 24 Locating and playing media files using
24. the knob if there is more than one UPnP server and then press SELECT note your radio will display Access Denied at this stage Your PC will now prompt you that a device has attempted to connect to your UPnP server In order to allow the radio to have access to the media files you will need to click the Library tab from Windows Media Player 11 and select the Media Sharing item to open the Media Sharing window Media Sharing for Windows Media Player 11 Windows Media Player van dd Music Playlists Playlist4 Now Playing Library Create Playlist Ctrl N Create Auto Playlist E Playlists ET Create Playlist Music Pictures 5 compi gt Like Humans Do gt Playlist J Library 2 Recently Added CH Artist Album 2 Songs Genre Year iy Rating 5 Beethoven C Video Recorded TY Other Add to Library Media Sharing Apply Media Information Changes Add Favorites to List When Dragging More Options Help with Using the Library gt b Edit in List Pane From the Media Sharing window the radio will be listed as an unknown device Click on the unknown device listed then click the Allow button and then click OK 25 Allowing the Radio to Connect Media Sharing A Share music pictures and video on your network Learn more about sharing Sharing settings Share my media to Settin
25. the radio and UPnP 26 Browsing the list of tracks currently queued up for playback 27 Queuing up UPnP tracks for playback later 27 Queuing up albums for playback later 27 Controlling playback 27 Removing tracks from the queue 28 Playing tracks in random order 28 Playing tracks in the queue repeatedly 28 Configure menu 29 Choosing the option you want from the Configure menu 29 lt Network Config gt 29 lt Version gt 29 lt Upgrade Firmware gt 29 lt Language gt 30 lt Factory Reset gt 30 lt Register gt 30 lt Clock setup gt 30 lt Backlight gt 30 lt Wifi Strength gt 30 Configuring My Stuff 31 Registering an account on Reciva s website 31 Configuring My Stations 31 Configuring My Streams 32 Troubleshooting 33 Software licence information 34 Specifications 35 Internet Radio Quickstart Guide What you need before you can use your Internet radio Before you can use your Internet radio you need the following e A broadband Internet connection e A wireless access point Wi Fi connected to your broadband Internet preferably via a router e If your wireless network is configured to use Wired Equivalent Privacy WEP or Wi Fi Protected Access WPA data encryption then you need to know the WEP or WPA code so you can get the Internet radio to communicate with the network The Internet radio should work anywhere within up to 30 metres of the wireless access point depending on the wireless router Before you
26. the track you want to remove from the queue 3 Press and hold the 5 STOP button for 2 seconds and the radio will display Delete Track 4 Turn the TUNE knob to highlight Yes or No 5 Press SELECT to confirm whether you actually want to delete the track from the queue 6 If Yes was selected then Removed From Queue will be displayed 7 To remove all tracks from the queue keep pressing BACK until the Media Player menu item is selected press SELECT and then turn the TUNE knob to select Clear Queue and press SELECT again Playing tracks in random order 1 Select the individual tracks as described previously 2 Navigate to top level menu item Media Player using the SELECT and BACK buttons 3 Press the SELECT button 23 DIS En Turn the TUNE knob until Playback Mode is displayed Press the SELECT button Turn the TUNE knob until Shuffle is displayed Press the SELECT button Turn the TUNE knob to select YES NO to confirm that shuffle mode should be enabled Playing tracks in the queue repeatedly i 2 u SE SS Select the individual tracks as described previously Navigate to top level menu item Media Player using the SELECT and BACK buttons Press the SELECT button Turn the TUNE knob until Playback Mode is displayed Press the SELECT button Turn the TUNE knob until Repeat is displayed Press the SELECT button Turn the TUNE knob to select YES NO to con
27. tion you want Note do not hold the button down if you do then the station currently playing will overwrite the one stored in the preset be careful Requesting a station that is currently unavailable If you want to listen to a particular radio station which is currently not available online you can visit the Reciva website at http www reciva com and put in a request to add the station to the list Stations which enable you to choose what you listen to Some radio stations can provide a number of options associated with their Station for example some stations enable you to listen to programmes that have already been broadcast When you select a radio station that has this facility the station does not start playing immediately but instead the display shows lt Live gt 1 Turn the TUNE knob to choose lt Live gt or lt On Demand then press the SELECT button If you choose lt Live gt then the radio plays the current output from this Station as normal If you choose lt On Demand gt then more screens are displayed where you choose what you want to listen to What is displayed will depend on the station you have chosen the following steps are only a guide 2 When you choose lt On Demand gt the display shows the names of the programmes Turn the TUNE knob to choose the program you want then press the SELECT button 16 3 When you have chosen the programme you want to listen to either it will just start playing o
28. to enter the correct WEP or WPA code into the radio to get it to communicate with your network Only the person who set up the network in the first place knows this code if that person is not you then you need to find out what it is After 3 seconds the display goes into the code entry mode To enter the code use the TUNE knob to select each character of the code in turn pressing the 11 SELECT button after each character Note that WEP and WPA codes are sensitive to upper and lower case characters so you must enter them exactly After the final character use the TUNE knob to select the END character and press the SELECT button The radio should now be able to connect to the network Steps for connecting your radio to your wired network For connection via a wired network simply plug in the Ethernet cable from your switch or hub before you connect the radio to power The radio will always prioritize a wired network in front of a wireless network if it is available The RJ 45 connecter has two LEDs near the port that shows the status of the connection The Green LED indicates if a live connection is present The yellow LED indicates if thare are any on going traffic on the wired connection If you wish to make sure the radio only will attempt to connect to either a wired or a wireless network you can lock it to use only a wired or wireless connection 1 Press the SELECT button to return to the top level menu Note if you make a mist
29. tton for 2 seconds Turn the TUNE knob to highlight Yes or No Press SELECT to confirm whether you actually want to delete the track from the queue lf Yes was selected then Removed From Queue will be displayed To remove all tracks from the queue keep pressing BACK until the Media Player menu item is selected press SELECT and then turn the TUNE knob to select Clear Queue and press SELECT again Playing tracks in random order 1 2 So oe Select the individual tracks as described previously Navigate to top level menu item Media Player using the SELECT and BACK buttons Press the SELECT button Turn the TUNE knob until Playback Mode is displayed Press the SELECT button Turn the TUNE knob until Shuffle is displayed Press the SELECT button Turn the TUNE knob to select YES NO to confirm that shuffle mode should be enabled Playing tracks in the queue repeatedly 1 2 DO OP ee Select the individual tracks as described previously Navigate to top level menu item Media Player using the SELECT and BACK buttons Press the SELECT button Turn the TUNE knob until Playback Mode is displayed Press the SELECT button Turn the TUNE knob until Repeat is displayed Press the SELECT button Turn the TUNE knob to select YES NO to confirm that repeat mode should be enabled 28 Configure menu Choosing the option you want from the Configure menu 1 Press the
30. uff Registering an account on Reciva s website 1 Open the website http www reciva com from your Internet browser 2 Click on the My Account link and follow the on screen instructions to register an account Please note during the registration process a validation code will be sent to you via email Please enter this code when prompted to do so 3 After logging into your account you will be able to edit your information for My Stations My Streams My Details and My Radios from the My Account section 4 You can now add your Internet Radio to your account on the website by accessing the My Radios link From the My Radios section you will need to enter in your radio s eight digit serial number which can be found from the Configure gt Version menu on the radio and you will also need to enter in your radio s registration code which can be found from the Configure gt Register menu on the radio M ee My Stations It is possible to search for radio stations that are available in Reciva s stations database from Reciva s website Whenever stations are searched for on the website they will be displayed in a list of search results together with a link to Add to My Stations 2 Clicking on the Add to My Stations link will add the station to your account s My Stations list This list can be edited by clicking on My Stations under the My Account
31. y pressing SELECT Then you must choose if you want the alarm to be a buzzer the radio station that you are currently listening or a radio station assigned to a preset Confirm your choice by pressing SELECT The display will show lt Alarm set gt 19 lt Weekdays gt e If you choose WEEKENDS the alarm will start every Saturday and Sunday of the week on the selected time Confirm your choice by pressing SELECT Then you must choose if you want the alarm to be a buzzer the radio station that you are currently listening or a radio station assigned to a preset Confirm your choice by pressing SELECT The display will show lt Alarm set gt lt Weekends gt The display says Alarm Set with the time of the alarm shown beneath for 3 seconds and then returns to the radio station display Note When the alarm goes of you can press SNOOZE on top of the unit to delay the alarm for 5 minutes Setting the sleep timer 1 Press the ALARM button Note if you make a mistake at any point press the BACK button to go back to the previous screen 2 Turn the TUNE knob until the display says lt Sleep Timer gt lt Sleep Timer gt 3 Press the SELECT button 4 The display will show lt Sleep timeout gt and then 00 00 00 Use the TUNE knob to adjust the time If you set the time to 01 30 00 the radio will be set to turn off in one and a half hour Confirm your choice by pressing SELECT Sleep Timeout lt 00 00 00 gt 20 Media
Download Pdf Manuals
Related Search