Sony VGN-FE550G Replacement Instructions
Contents
1. lid is closed battery pack and the other is located on shown in the picture and the AC Adapter is disconnected the right side Using your thumbs and Failure to do so can result in damage to fingers push both tabs in the release the computer direction gently push the battery pack away from you Place the computer upside down on a protected surface with the front edge facing you P N 994636700 Rev C 1 2 Step 4 Using the enclosed magnetic screwdriver loosen the two 2 screws securing the hard disk drive access door Gently remove the access door at an angle to avoid damaging the notch Step 6 With even force slide the HDD by pulling the plastic tab on the direction of the arrow Some force may be needed to unlock the HDD from the connector Step 9 Align the HDD with the connector and with even force push in the new HDD Reinstall the two 2 previously removed screws VGN FE Senes Hard Disk Drive Replacement Instructions Step 5 Using the enclosed magnetic screwdriver remove the two 2 screws as indicated in the picture Step 7 Gently pull out the original HDD away from the computer as shown Step 10 Reinstall the HDD access door previously removed Align the access door notch to avoid damage 2 2 Step 8 Hold the new HDD by the edges and slide it inside the opening in an angle Step Tl Reinstall the Battery Pack and reconnect the AC Adapter Power on your computer and continue with the2. recovery process by following instructions described on the back of the recovery disk s case Return the old HDD to Sony following the included shipping instructions
3. SONY VGN FE Seres Hard Disk Drive Replacement Instructions IMPORTANT PLEASE READ BEFORE YOU START These easy instructions are intended to guide you through the replacement process v To avoid electnc shock please make sure product is tumed off and AC Adaptor is disconnected from the power source Remove jewelry before you begin work to avoid scratching the surface of your notebook computer v Place your notebook computer on a clean stable and covered surface to avoid damage to the computers case v Follow the ESD Electrostatic Discharge damage prevention instructions o Hold partsby the edges away from exposed circuitry when possible o Do notwalk around excessively asthis promotes static build up v The appearance of the electronic components shown in the illustrations may be different from the components shipped This slight difference doesnot affect the accuracy of these instructions Sony is not responsible for any loss of data associated with your computer or any damage caused by incorect handling of the computerunderthese procedures The termsof your Sony limited warranty continue to apply Push tabs in the release direction Step 1 Prepare the Computer Step 2 Remove the Battery Pack Step 3 Locate HDD Bay AN Locate the two tabs as shown in the Rotate the computer with the Hard CAUTION Make sure the picture One is on the left end of the Disk Drive HDD bay facing you as computer is turned off the
Download Pdf Manuals
Related Search