Home

Sony SLV-D910N/R User's Manual

Contents

1. I operating instructions supplied with your K9 disc Before you start Turn on the DVD VCR and your TV e Set your TV to the video channel so that the signal from the player appears on the TV screen e Set TV DVD VIDEO to DVD VIDEO then press SELECT DVD to control the DVD player page 9 lt lt gt gt lh kaa gt i il a eS 1 Press amp to open the disc tray and place a disc on the disc tray with the playback side facing down continued Playing discs suoeiad o1seg H 33 2 Press D gt The disc tray closes and the DVD player starts playback The display window shows the playback time Depending on the disc a menu may appear on the TV screen For DVDs see page 66 For VIDEO CDs see page 86 Hour Minute Second appears when no disc is loaded Additional tasks To Press Stop play Pause play i Resume play after pause H or gt Advance by frame in pause mode I Go to the next chapter track or scene PA on the remote in continuous play mode Go back to the previous chapter track K lt on the remote or scene in continuous play mode Stop play and remove the disc If you pause the DVD player for more than 5 minutes the DVD player will automatically stop To Resume playback for the current disc Resume Play The DVD player remembers the point where you stopped the disc even if the DVD player enters standby
2. CLEAR Setting the PAY TV Canal Plus decoder SLV D910N only continued Q fel z 5 a wn D 2 Press to select the row which you want to set for the decoder then press G lt gt To display positions 6 to 80 press DECODER repeatedly NAME Ava RETURN MANUAL TUNING z5 gt 033 OFF MEMORY LENTER Press to select DECODER 9 ES lt gt DECODER NAME Avar RETURN MANUAL TUNING 5 033 OFF MEMORY ENTER Press to set DECODER to ON then press ENTER eS SS DECODER NAME Aava RETURN ON MANUAL TUNING 5 033 MEMORY LENTER Press 6 RETURN then press SET UP to exit the menu D m m J Pa SET UP a O 2 O e To superimpose subtitles while watching Canal Plus programmes make both decoder VCR and VCR TV connections using 21 pin Scart cables that are compatible with the RGB signals You cannot record subtitles on the VCR e When you watch PAY TV Canal Plus programmes through the RFU input of the TV press TV VIDEO so that the VCR indicator appears in the display window 32 Setting the PAY TV Canal Plus decoder SLV D910N only Basic Operations Playing discs Depending on the disc some operations may be different or restricted Refer to the
3. Press to select an album then press G ENTER The list of tracks contained in the album appears To select a track repeat step 2 MP3 Total 12 S 1 tracki a L 2 track2 J track 3 track3 4 track4 5 track5 EAP ENTER RETURN SETUP To go to the next or previous page Press or To return to the previous display Press gt RETURN To turn off the display Press W then press RETURN repeatedly Notes e Only the letters in the alphabet and numbers can be used for album or track names Anything else is displayed as an asterisk suonesodo jeuonippy GAC j e Up to 8 alphanumeric characters can be displayed for album or track names ID3 tags cannot be displayed About MP3 audio tracks You can play MP3 audio tracks on CD ROMs CD Rs or CD RWs However the discs must be recorded according to IS09660 level 1 level 2 or Joliet format for the player to recognize the tracks You can also play discs recorded in Multi Session See the instructions of the CD R RW device or recording software not supplied for details on the recording format continued Playing an MP3 audio track 79 80 To play a Multi Session CD This player can play Multi Session CDs when an MP3 audio track is located in the first session Any subsequent MP3 audio tracks recorded in the later sessions can also be played back When audio tracks and images in music CD format or video
4. Stereo The standard stereo sound Left The sound of the left channel monaural Right The sound of the right channel monaural Changing the sound suonesodo jeuonippy GAC 75 76 Virtual surround setting When you connect a stereo TV or 2 front speakers SURROUND lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers from the sound of the front speakers without using actual rear speakers This function is designed to work with the OUT AUDIO L R jacks SURROUND 1 suRRounp Press SURROUND during playback O 2 suRROUND Press SURROUND repeatedly to select On To cancel the setting Select Off in step 2 Virtual surround setting Notes Surround effects cannot be obtained for DTS or linear PCM When the playing signal does not contain a signal for the rear speakers the surround effects will be difficult to hear When you activate the surround effect turn off the surround setting of the connected TV or amplifier receiver Make sure that your listening position is between and at an equal distance from your speakers and that the speakers are located in similar surroundings If you use the DIGITAL AUDIO OUT OPTICAL or COAXIAL jack and set Dolby Digital to Dolby Digital or DTS to On in AUDIO SETUP menu sound will come from your speakers but it will not have the surround effect Certain audio feat
5. St 4 serup Press SET UP to exit the menu O Menu choices The default settings are indicated in bold print OPTION Menu option Set this option to Auto Power Off e Off to deactivate the Auto Power Off function 1Hour 2Hours 3Hours to turn the DVD VCR off automatically if no signal is received and you do not press any of the buttons during this time Screen Messages e On to display the menu on the TV screen e Off to disappear the menu from the TV screen VIDEO SETUP Menu option Tape Select Set this option to e E180 to use an E 180 or shorter type tape e E240 to use an E 240 type tape e E260 to use an E 260 type tape e E300 to use an E 300 type tape Repeat Play e On to play back a tape repeatedly The VCR rewinds a tape to the beginning and restarts playback automatically e Off to turn off Auto repeat Changing menu options suonesadg euoMIppy HOA H 99 Editing How to connect to record on this VCR Connect the line outputs of the other VCR to the input connector of this VCR Refer to the examples A through C and choose the connection that best suits your VCR Example A TV Your VCR Recorder Other VCR Player O o00 Scart EURO AV _ Scart cable not supplied c signal flow Example B Your VCR Recorder LINE
6. Note e Be sure to select the programme position you want to disable correctly If you disable a programme position by mistake you need to reset that channel manually continued Presetting channels 27 Changing the station names You can change or enter the station names up to 4 characters The DVD VCR must receive channel information for station r i SET UP names to appear automatically Before you start Turn on the DVD VCR and your TV To control the DVD VCR set TV DVD VIDEO to DVD VIDEO on the remote page 9 e Set your TV to the video channel so that the signal from the player appears on the TV screen t 4 4 gt ENTER Ifthe DVD player is in play mode you eS RETURN cannot display the setup menu Stop the DVD playback Press SET UP then press to select A JETON OPTION then press ENTER rem Fanguage English 9 install User Set Auto Power Off ORG Screen Messages ml n m 4 Cc U O O lt gt I ENER RETURN Press to select Install then press ENTER Orn Auto Setup The INSTALL menu appears SF sytem yt TV System eS gt K Qro Video Output CH CH32 mer DE RETURN Press to select Manual Setup then press TV STATION TABLE ENTER 9 CS lt gt U av gt SWAPPING LENTER RETUR
7. e Resume play has taken effect page 34 The player starts playing the disc The disc features an auto playback function automatically Playback stops automatically e While playing discs with an auto pause signal the player stops playback at the auto pause signal You cannot perform some functions Depending on the disc you may not be able to do some such as stop search slow motion operations See the operating manual that comes with the play repeat play shuffle play or disc programme play 5 The language for the sound track Try using the DVD s menu instead of the direct selection 5 cannot be changed button on the remote page 66 g e Multilingual tracks are not recorded on the DVD being 0 played The DVD prohibits the changing of the language for the sound track The subtitle language cannot be e Try using the DVD s menu instead of the direct selection changed or turned off button on the remote page 66 e Multilingual subtitles are not recorded on the DVD being played The DVD prohibits the changing of the subtitles The angles cannot be changed Try using the DVD s menu instead of the direct selection button on the remote page 66 e Multi angles are not recorded on the DVD being played e The DVD prohibits changing of the angles The player does not operate properly When static electricity etc causes the player to operate abnormally unplug the player VCR Troubleshooting Symptom Remedy The play
8. Q then press ENTER MGE ress to se p 3 Q appears Press to move amp to the position where you want to zoom in 4 Press ENTER repeatedly to change the magnification Each time you press ENTER the magnification changes as shown below 2x normal magnification suonesedo jeuonppy GAC j continued Playing JPEG image files 83 To enjoy the Slide show 1 Press to select an image in the Album rena Ee os display then press ENTER 2 Press to select then press ENTER The Interval menu appears ENTER IMAGE Press to select the desired playing speed then press ENTER Slide show starts To turn on off the menu in the single image display Press DISPLAY in the single image display To return to the Album display Press DISPLAY to turn on the menu and press to select 8 then press ENTER You can also use MENU button to return to the Album display Press F amp a repeatedly to return to the first Album page To return to the Select a Media Type menu Press W twice then press TOP MENU Notes e Slide show can play in only one direction e You cannot rotate or zoom in the image during Slide show e Ifyou select 88 in the rotated image display the images in the Album display will also be rotated Correct the rotation in the single image display About JPEG im
9. VIDEO CD dist CiGITAL VIDEO Music CD alice DIGITAL AUDIO The DVD VIDEO logo is a trademark Region code Your player has a region code printed on the back of the unit and only will play DVD VIDEO discs playback only labelled with identical region codes This system is used to protect copyrights DVDs labelled player will also play on this If you try to play any other DVD the message Playback prohibited by area limitations will appear on the TV screen Depending on the DVD no region code indication may be labelled even though playing the DVD is prohibited by area restrictions Region code 00v 00Hz ow Example of discs that the player cannot play The player cannot play the following discs e All CD ROMs including PHOTO CDs CD Rs CD RWs other than those recorded in the following formats music CD format video CD format MP3 or JPEG format that conforms to ISO9660 Level 1 Level 2 or its extended format Joliet e Data part of CD Extras DVD RWs in VR mode e DVD ROMs e DVD Audio discs HD layer on Super Audio CDs A logical format of files and folders on CD ROMs defined by ISO International Standard Organization Also the player cannot play the following discs A DVD with a different region code e A disc that has a non standard shape e g card heart e A disc with paper or stickers on it e A disc that has the adhesive
10. Various play mode functions Programme play Shuffle play Repeat play Changing the sound Virtual surround setting Playing an MP3 audio track Playing JPEG image files Playing VIDEO CDs with MENU ON OFF functions VCR Additional Operations Playing a tape with SQPB function Quick Timer Recording Recording stereo and bilingual programmes Searching using index function Adjusting the picture tracking Changing menu options 100 Editing Additional Information 103 General setup information 105 Troubleshooting 110 Glossary 112 Specifications 114 Index to parts and controls 119 DVD Audio Subtitle Language 120 Index Table of contents 5 About this manual The meaning of the icons used in this manual is described below Icon Meaning Functions available for DVD VIDEOs and DVD RWs DVD Rs in video mode or DVD RWs DVD Rs Functions available for VIDEO DVD VCD CDs Super VCDs or CD Rs DATA CD CD RWs in video CD format or Super VCD format Functions available for DATA CDs CD ROMs CD Rs CD RWs containing MP3 audio tracks or JPEG files Functions available for music CDs or CD Rs CD RWs in music CD format DATA CD Functions available for VHS VIDEOs MP3 MPEG 1 Audio Layer 3 is a standard format defined by ISO MPEG which compresses audio data This player can play the following discs Format of discs DVD VIDEO VIDEO
11. to select Manual Setup then press STATION TABLE ENTER IJK av gt SWAPPING LENTER RETURN DELETE CLEAR Press to select the row containing the TV STATION TABLE programme position you want to change v D To display other pages for programme positions 6 to 80 press repeatedly IJK 4 onnon SWAPPING LENTER DELETE CLEAR Press ENTER then press to move to the TV STATION TABLE desired programme position NANE DER AAB OFF CDE OFF IJK OFF LMN OFF av gt SWAPPING LENTER RETURN DELETE CLEAR Press ENTER to confirm the setting To change the programme position of another station repeat steps 4 through 6 continued Presetting channels 25 26 7 Press 6 RETURN then press SET UP to exit the menu RETURN SET UP O Disabling unwanted programme positions After presetting channels you can disable unused programme positions The disabled positions will be skipped later when you press the PROG buttons Before you start Turn on the DVD VCR and your TV To control the DVD VCR set TV DVD VIDEO to DVD VIDEO on the remote page 9 e Set your TV to the video channel so that the signal from the player appears on the TV screen If the DVD player is in play mode you cannot display the setup menu Stop the DVD playback CLEAR
12. 19 20 21 22 23 24 25 lI STEP button 34 HI pause button 34 play button 34 4 buttons ENTER button 15 DISPLAY button 37 43 TOP MENU button 66 VO on standby switch 10 VOL volume buttons 10 ZOOM button 68 ANGLE button 69 A P SCAN SLOW B buttons 34 kea gt P1 PREV NEXT buttons 34 E stop button 34 2 gt RETURN button 24 MENU button 66 Number 5 AUDIO and D gt buttons have a tactile dot Use the tactile dot as a reference when operating the DVD VCR continued Index to parts and controls UOHEWIOJU EUOHPPY 117 118 Remote commander for VCR 1 TV DVD VIDEO switch 9 2 amp eject button 40 3 SELECT VIDEO button 9 4 Number buttons 10 5 CLEAR button 27 6 SET UP button 16 TIMER button 46 AUDIO button 91 9 INDEX button 94 II STEP button 40 11 REC record button 43 Index to parts and controls 12 mE pause button 40 13 C gt play button 39 14 4 4 buttons ENTER button 15 15 DISPLAY button 43 16 1 0 on standby switch 10 40 17 PROG programme TRACKING buttons 41 43 18 VOL volume bu
13. DVD indicator 34 Disc indicator 34 Tape indicator 39 VCR indicator 39 Timer indicator ol la l N N lo S ke Recording indicator 43 STEREO indicator 91 Playing time clock current status indicator 34 SURR surround indicator 76 DTS indicator 56 continued Index to parts and controls UOHEWIOJU EUOHPPY j 115 Rear panel copooonoo0 oooooannnn 9 8 7 DVD player and VCR DVD player only 1 amp out to tv connector 11 6 Mains lead 11 2 1 in from aerial connector 11 DIGITAL AUDIO OUT jack 3 OUT VIDEO AUDIO LIR jacks 52 COAXIAL 53 S VIDEO OUT jack 54 9 DIGITAL AUDIO OUT jack OPTICAL 53 4 LINE 3 connector 13 5 LINE 1 EURO AV connector 12 116 Index to parts and controls Remote commander for DVD 1 TV DVD VIDEO switch 9 2 amp open close button 33 34 3 SELECT DVD button 9 4 Number buttons 10 64 5 CLEAR button 72 6 SURROUND button 76 SET UP button 16 SUBTITLE button 70 9 AUDIO button 75 REPEAT PROGRAM button 71 74 12 13 14 15 16 17 18
14. and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Caution 3 Table of contents WARNING Welcome Caution About this manual This player can play the following discs NOOO ODN ND Notes about discs Getting Started 8 Step 1 Unpacking 9 Step 2 Setting up the remote commander 11 Step 3 Connecting the DVD VCR 14 Step 4 Setting up the DVD VCR with the Auto Set Up function 17 Step 5 Selecting the TV system 19 Step 6 Selecting a language 20 Step 7 Setting the clock 22 Step 8 Presetting channels 30 Setting the PAY TV Canal Plus decoder Basic Operations Advanced Hookups 33 Playing discs 52 A V Receiver hookup 37 Guide to the on screen display 54 S Video hookup 39 Playing a tape 42 Recording TV programmes DVD Settings and 46 Recording TV programmes using the Adjustments tumer 55 Audio Setup 50 Checking changing cancelling timer 58 Screen Setup settings 61 Setting the display or sound track language 63 Parental Control limiting playback by children 4 Table of contents 66 68 69 70 71 75 76 78 82 86 88 89 91 94 96 98 DVD Additional Operations Using the DVD s menu Zooming into a scene Changing the angles Displaying the subtitle
15. selection menu displayed on your TV screen The MENU ON function is the PBC Number buttons function ce 4 4 ENTER RETURN MENU 1 Start playing a VIDEO CD with MENU ON The menu for your selection appears 2 ES Press to select the item number you want You can also use the number buttons to select the item number and track J Ave lt gt OOO OLOLLO OLOO 86 Playing VIDEO CDs with MENU ON OFF functions Press ENTER lt gt Follow the instructions in the menu for interactive operations Refer to the instructions supplied with the disc as the operating procedure may differ depending on the VIDEO CD To return to the menu Press gt RETURN To play using MENU OFF Press MENU to select MENU OFF When MENU OFF is selected the DVD player starts continuous play You cannot play still pictures such as a menu To return to MENU ON press MENU to select MENU ON Tip e Depending on the VIDEO CD Press ENTER in step 3 may appear as Press SELECT in the instructions supplied with the disc In this case press D gt Playing VIDEO CDs with MENU ON OFF functions suonesodo jeuonppy GAC j 87 VCR Additional Operations Playing a tape with SQPB function The SQPB Super VHS Quasi Playback function is only for playing a Super VHS format tape SQPB 1 Insert a Super VHS format tap
16. to select an item 5 5 setup Press SET UP to exit the menu O Menu choices e TV Type Selects the aspect ratio of the connected TV 4 3 standard or wide The default setting is indicated in bold print 4 3 Letter Box Select this when you connect a 4 3 screen TV Displays a wide picture with bands on the upper and lower portions of the screen 4 3 Pan Scan Select this when you connect a 4 3 screen TV Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit 16 9 Select this when you connect a wide screen TV ora TV with a wide mode function 4 3 Letter Box 4 3 Pan Scan 16 9 DVD LINEI RGB Out Selects the method of outputting video signals from the LINE 1 EURO AV jack on the rear panel of the player The default setting is indicated in bold print Off Select this not to output RGB signals On Select this to output RGB signals DVD S Video Out Selects whether or not to output S video signals from the S VIDEO OUT jack on the rear panel of the player The default setting is indicated in bold print On Select this when the player is connected to a TV with S VIDEO input jack Off Select this when the player is connected to a TV lacking S VIDEO input jack continued sjuswysnipy pue sumas GAG f Screen Setup 59 60 Notes Screen Setup Playback settings stor
17. CD format are recorded in the first session only the first session will be played back Notes e If you put the extension MP3 to data not in MP3 format the player cannot recognize the data properly and will generate a loud noise which could damage your speaker system The player cannot play audio tracks in MP3PRO format e This player supports MP3 audio tracks recorded with a bit rate of 128 kbps and a sampling frequency of 44 1 kHz Attempting to play MP3 audio tracks recorded with different specifications may result in loud noise sound skipping or speaker damage e Depending on the disc playback may take some time to start The Playback order of MP3 audio tracks The playback order of albums and tracks recorded on a DATA CD is as follows Structure of disc contents Tree 1 Tree2 Tree3 Tree4 Tree5 When you insert a DATA CD and press D gt the numbered tracks are played sequentially from through Any sub albums tracks contained within a currently selected album take priority over the next album in the same tree Example contains so is played before When you press c gt RETURN and the list of MP3 albums appears page 79 the albums are arranged in the following order o o6 O0 gt Albums that do not contain tracks such as album do not appear in the list Playing an MP3 audio track Tips e If you add numbers 01 02 03 etc to the front of the track file names the tracks
18. ENTER after selecting a media type the selected media will be automatically played 5 SLIDE SHOW ENTER 82 Playing JPEG image files 3 Press k gt P to select the next previous album page then press to select an image in the Album display To display the selected image Photo 1 500 w a F ee perun 1 Press ENTER EN The selected image number appears in the IMAGE display window 2 To display the next previous image press lt gt Hea gt ei To play the Slide show sa Fast 1 Press aa Normal You can also play the Slide show using the Sa Slow menu on the selected image For details see To enjoy the Slide show on page 84 2 Press to select the desired playing IMAGE speed on the Interval menu then press ENTER Slide show starts from the selected image Interval aa a a a a fella ENTER RETURN To rotate the selected image Press to select an image in the Album Photo 1400 display then press ENTER 53 aA a Me eves be 2 Press to select then press ENTER Each time you press ENTER the image turns clockwise by 90 IMAGE To zoom in an image Press to select an image in the Album 7 display then press ENTER i Press lect
19. No index signal will be added when recording starts from recording pause However an index signal will be marked if you change the programme position during recording pause Searching using index function suonesadg euoMIppy HOA H 95 Adjusting the picture tracking Adjusting the tracking Although the VCR automatically adjusts the tracking when playing a tape distortion may occur if the recording is in poor condition In this case manually adjust the tracking During playback press TRACKING to display the tracking meter The distortion should disappear as you press one of the two buttons To resume automatic tracking adjustments eject the tape and re insert it TRACKING E Tracking meter Adjusting the picture sharpness Smart trilogic You can automatically adjust the sharpness of the picture SET UP t 4 4 gt ENTER 2 gt RETURN 1 SET UP During playback press SET UP then press Q 4 to select OPTION and press Ero tangiageenaish ENTER Em Clock OPTION Auto Power Off Off OLG Screen Messages On TR I ENTER RETURN SETUP lt gt 96 Adjusting the picture tracking 9 ec Press to select User Set then press SER SET ENTER 6 ml Colour System Auto See NICAM On Smart Trilogic On Qao Oma Doro RETURN oO 9
20. Oma CLOCK SET Time 18 30 OFAN 13003 WED Autoclock On 414 RETURN Set the day month and year in sequence by pressing to select the item to be set and press to select the digits then press The day of the week is set automatically For SLV D910R skip step 6 Gam Qo Qo mm CLOCK SET Time Date 18 30 28 SEP 12003 SUN Autoclock On payieys buiye5 414 RETURN Press to select On for the setting of the Auto Clock Set function SLV D910N only The DVD VCR automatically sets the clock according to the time signal broadcast between the channels PR 1 to PR 5 If you do not need the Auto Clock Set function select Off Gare Goo Que OR CLOCK SET Time Date 18 30 28 SEP 12603 SUN Autoclock On 414 RETURN Press ENTER to confirm the setting Press SET UP to exit the menu Tips If you set Autoclock to On the Auto Clock Set function is activated whenever the DVD VCR is turned off The time is adjusted automatically by making reference to the time signal from the station SLV D910N only To change the digits while setting press to return to the item to be changed and select the digits by pressing Note e The clock display appears when VIDEO mo
21. SET UP 4 4 4 gt ENTER 2 gt RETURN 1 SET UP Press SET UP then press to select 2 Q OPTION then press ENTER TR goy lt gt OPTION Language English Clock Install User Set Auto Power Off Off Screen Messages On ENTER RETURN SET UP Presetting channels Press to select Install then press STALL ENTER Bem pate Setup AAB OFF LMN OFF CDE OFF IJK OFF p M Set The INSTALL menu appears Se TW System K Qo Video Output CH CH32 om ENTER RETURN O 2 99 3 Press to select Manual Setup then press TV STATION TABLE 2 ENTER NAME DEC T 2 o Q SWAPPING ENTER DELETE CLEAR Press 4 to select the row which you want to TV STATION TABLE disable AUE BEG i es To display other pages for programme ee positions 6 to 80 press repeatedly IJK OFF av gt SWAPPING ENTER RETURN DELETE CLEAR R Press CLEAR TV STATION TABLE O The selected row will be cleared as shown on RABE ORE the right CDE OFF IJK OFF av gt SWAPPING LENTER RETURN DELETE CLEAR Repeat steps 4 and 5 for any other programme positions you want to disable Press RETURN then press SET UP to exit the menu RETURN SET UP O
22. Sub right channel Notes e To listen to playback sounds in stereo you must use the Scart or AUDIO OUT connections When you play a tape recorded in monaural the sound is heard in monaural regardless of the AUDIO setting Recording stereo and bilingual programmes suonesadg euoMIPpy HOA H 93 Searching using index function The VCR automatically marks the tape with an index signal at the point where each recording begins Use these signals as references to find a specific recording To find a specific recording by scanning Index scan 1 Insert an indexed tape into the tape compartment 2 Press INDEX then press lt lt The VCR starts scanning each recording for five seconds in the corresponding direction INDEX SCAN gt gt 3 Press gt to start playback when you find the desired point 94 Searching using index function To search a specific recording Index search 1 Insert an indexed tape into the VCR 2 Press INDEX then press lt lt 4 P twice e To search ahead press P twice e To search backwards press lt lt twice INDEX SEARCH gt gt 01 is located 20 respectively Press lt lt 4 P depending on the direction where your desired programme Each time you press the button the number increases or decreases up to 4 The VCR starts searching and playback starts automatically from that point To stop searching Press W Note e
23. Z Zoom 68 83 ZWEITON broadcasts 91 http www sony net AK68 00187H
24. display window the mains Reset the clock and timer 8 The remote commander does not e Make sure you are pointing the remote commander at the function remote sensor on the DVD VCR e Replace all the batteries in the remote commander with new ones if they are weak e Make sure the TV DVD VIDEO switch is set correctly g e Select correctly VIDEO or DVD with the SELECT DVD VIDEO button O The tracking meter does not appear The recording condition of the tape is very poor and on the screen tracking cannot be adjusted You cannot control other TVs e Set your TV s code number The code number may change when you replace the batteries of the remote commander DVD Troubleshooting Symptom Remedy There is no picture picture noise e Re connect the connecting cord securely appears e The connecting cords are damaged e Check the connection to your TV page 11 and switch the input selector on your TV so that the signal from the player appears on the TV screen g e The disc is dirty or flawed e If the picture output from your player goes through your VCR to get to your TV or if you are connected to a combination TV VIDEO player the copy protection signal applied to some DVD programmes could affect picture quality If you still experience problems even when you connect your player directly to your TV please try connecting your player to your TV s S VIDEO input page 54 continued Troubleshooting UOH
25. is not at its end Troubleshooting Symptom The timer does not operate Remedy Check that the clock is set Make sure a tape has been inserted Check that the safety tab has not been removed Make sure the tape is not at its end Make sure a programme has been set for timer recording Make sure your timer settings are past the current time Check that the decoder is turned on cleaned D 5 e Check that the satellite tuner is turned on Q The clock stops if the DVD VCR is disconnected from o the mains for more than one minute Reset the clock and 5 timer E Turn the power off and unplug the mains lead ol The VPS PDC function does not e Check that the clock and the date are set correctly operate properly e Check that the VPS PDC time you set is the correct one there might be a mistake in the TV programme guide If the broadcast you wanted to record did not send the good VPS PDC information the VCR will not start recording e If the reception is poor the VPS PDC signal might be altered and the VCR might not start recording we You cannot watch PAY TV Canal e Check that DEC is set to ON for this channel in the 5 Plus programmes when the VCR is TV STATION TABLE menu Q in standby mode e Make sure the PAY TV Canal Plus Scart cable is plugged g securely fo Q A PAY TV Canal Plus programme is Make sure the PAY TV Canal Plus Scart cable is plugged
26. lt gt 1 ANGLE Press ANGLE during playback SQPB O The angle number appears on the display The number after the slash indicates the total number of angles 16 gt 2 CES Press repeatedly to select the angle number RO The scene changes to the selected angle lt gt Note Depending on the DVD you may not be able to change the angles even if multi angles are recorded on the DVD Changing the angles suonesedo jeuonippy GAC 69 Displaying the subtitle ma If subtitles are recorded on the disc you can change the subtitles or turn them on and off whenever you want while playing a DVD SUBTITLE t 4 4 gt 1 SUBTITLE Press SUBTITLE during playback a 2 CES Press repeatedly to select the language Depending on the DVD the choice of language varies Refer to DVD Audio Subtitle Language on page 119 for the abbreviation SD of the language 3 Press repeatedly to select On To turn off the subtitles Select Off in step 3 Note e Depending on the DVD you may not be able to change the subtitles even if multilingual subtitles are recorded on the DVD You also may not be able to turn them off 70 Displaying the subtitle KA Various play mode functions Programme play Shuffle play Repeat play DA You can set the following play modes Programme play page 71 e Shuffle play page 73 e Repeat play page 74 Note The
27. lt gt SS RETURN SET UP continued Selecting the TV system 17 4 SET UP Press SET UP to exit the menu O 18 Selecting the TV system Step 6 Selecting a language You can change the on screen display language SET UP Before you start Turn on the DVD VCR and your TV To control the DVD VCR set TV DVD VIDEO to DVD VIDEO on the remote page 9 e Set your TV to the video channel so that the signal from the player appears on the TV screen e Ifthe DVD player is in play mode you cannot display the setup menu Stop the DVD playback Q J Ko wn o Q t 4 4 gt ENTER Press SET UP then press to select we SETION OPTION then press ENTER l G O lt gt Language English Clock ag Install User Set Auto Power Off Off Screen Messages On ENTER RETURN SET UP 2 CES Press to select Language then press LANGUAGE SET ENTER gt English agyar The LANGUAGE SET menu appears Cesky Russian Turkish ENTER RETURN Press to select the desired language then press ENTER Y T gt CO lt gt 4 SET UP Press SET UP to exit the menu O Selecting a language 19 20 Step 7 Setting the clock You must set the time and da
28. mode by pressing 1 1 While playing a disc press ll to stop playback 2 Press D gt The DVD player starts playback from the point where you stopped the disc in Step 1 Tip To begin playback from the top of the disc press ll twice then press D gt 34 Playing discs To locate a point quickly by playing a disc in fast forward or fast reverse in continuous play mode DVD VIDEO CD and CD only Press lt lt or BP For DVD or VIDEO CD each time you press the button the playback speed changes as follows x2 FF1 FR1 FF2 FR2 FF3 FR3 FF4 FR4 DVD only gt FFS FR5 DVD only Release the button at the desired speed For CD the searching speed does not change FF2 FR2 play When you find the point you want press D gt To watch slow motion in continuous play mode DVD and VIDEO CD only Press Ii then press gt SLOW B gt With each press the playback speed changes cyclically as follows as gt 1 4 gt 12 To resume normal playback press D gt Tip e To make a video timer reservation during DVD playback we recommend performing the operations under Quick Timer Recording page 89 Notes You can change the screen type using the SCREEN SETUP menu See Screen Setup on page 58 Do not perform VIDEO playback while playing back a disc If you play a DVD or VIDEO CD that has scratches the player may stop playback at the point of the scratch or
29. ra always recorded scrambled securely Z e Check that DEC is set to ON for this channel in the a TV STATION TABLE menu A tape cannot be inserted e Check that a tape is not already in the tape compartment The selected input line connector e Press INPUT SELECT to display the connected line a number does not appear in the display window fo The VCR mechanism needs to be e Clean the cabinet panel and controls with a dry soft cloth or a soft cloth slightly moistened with a mild detergent solution Do not use any type of solvent such as alcohol or benzine Symptoms caused by contaminated video heads e Normal picture initial Rough picture e Unclear picture e No picture or black amp white screen appears terminal contamination Troubleshooting UOHEUWIOJU euo ppy i 109 110 Glossary Chapter page 37 Sections of a picture or a music feature that are smaller than titles A title is composed of several chapters Depending on the disc no chapters may be recorded Dolby Digital pages 53 and 56 Digital audio compression technology developed by Dolby Laboratories This technology conforms to 5 1 channel surround sound The rear channel is stereo and there is a discrete subwoofer channel in this format Dolby Digital provides the same 5 1 discrete channels of high quality digital audio found in Dolby Digital cinema audio systems Good channel separation is
30. realized because all of the channel data are recorded discretely and little deterioration is realized because all channel data processing is digital Dolby Surround Pro Logic page 52 Audio signal processing technology that Dolby Laboratories developed for surround sound When the input signal contains a surround component the Pro Logic process outputs the front centre and rear signals The rear channel is monaural DTS page 56 Digital audio compression technology that Digital Theater Systems Inc developed This technology conforms to 5 1 channel surround sound The rear channel is stereo and there is a discrete subwoofer channel in this format DTS provides the same 5 1 discrete channels of high quality digital audio Good channel separation is realized because all of the channel data is recorded discretely and little deterioration is realized because all channel data processing is digital Glossary DVD page 6 A disc that contains up to 8 hours of moving pictures even though its diameter is the same as a CD The data capacity of a single layer and single sided DVD is 4 7 GB Giga Byte which is 7 times that of aCD The data capacity of a double layer and single sided DVD is 8 5 GB a single layer and double sided DVD is 9 4 GB and double layer and double sided DVD is 17 GB The picture data uses the MPEG 2 format one of the worldwide standards of digital compression technology The picture data is com
31. temperature 20 C to 60 C Dimensions including projecting parts and controls w h d Approx 430 x 95 x 325 mm Mass Approx 4 2 kg Supplied accessories Remote commander 1 R6 size AA batteries 2 Aerial cable 1 Audio cord pinplug x2 gt pinplug x2 1 Video cord pinplug x1 4 gt pinplug x1 1 Design and specifications are subject to change without notice Specifications UOHEWIOJU EUOHPPY i 113 Index to parts and controls Refer to the pages indicated in parentheses for details Front panel 1 1 C on standby switch 10 40 0 Display window 34 39 2 Disc tray 33 REC record button 43 3 4 open close button 33 34 12 lt 4 rewind fast forward buttons 4 Tape compartment 39 Oo 35 40 5 eject button 40 13 stop button 34 40 6 LINE 2 IN 5 9 L R jacks 100 14 EE pause button 34 40 SELECT DVD VIDEO 9 15 C gt play button 34 39 PROGRAM buttons 43 1 Covered 2 PROGRAM button has a tactile dot 9 Remote sensor 9 Use the tactile dot as a reference when operating the DVD VCR 114 Index to parts and controls Display window 10
32. the DVD VCR and your TV e Set your TV to the video channel so that the signal from the player appears on the TV screen e Set TV DVD VIDEO to DVD VIDEO then press SELECT VIDEO to control the VCR page 9 TRACKING CLEAR lt lt gt gt SLOW I gt l gt STEP kea gt gt i SHUTTLE H E gt suoeiado o1seg H DISPLAY 1 Insert a tape The VCR starts playing automatically if you insert a tape with its safety tab removed 2 Press D gt The display window shows the playback time When the tape reaches the end it will rewind automatically OO VCR Hour Minute Second continued Playing a tape 39 40 Additional tasks To Press Stop play E Pause play il Resume play after pause H or gt Fast forward the tape P amp P during stop Rewind the tape lt 4 during stop Eject the tape M Tf you pause the VCR for more than 5 minutes the VCR will automatically resume play To play a recently watched scene You can immediately rewind and playback the scene you want to watch again To skip playback You can skip a scene that you do not want to watch such as a commercial and restart playback During playback press IIB STEP The VCR skips the tape 30 seconds on the counter each time the button is pressed up to four times and playback is resumed To turn off the
33. the next row and repeat step 2 Press CLEAR to cancel the setting suoleiado oiseg 9 O lt gt Press ENTER to confirm all settings O Press 1 C to turn off the DVD VCR The indicator appears in the display window and the VCR stands by for recording To record from a decoder or other source leave the connected equipment switched on continued Recording TV programmes using the timer 47 48 To stop recording To stop the DVD VCR while recording press SELECT VIDEO and then press W Daily weekly recording In step 2 above press to select the recording pattern Each time you press the indication changes as shown below Press to change the indication in reverse order today DLY Monday to Sunday W SA every Saturday gt W SU every Sunday 1 month later dates count down today To use the Auto Tape Speed function In step 2 above press to select Auto When you are recording a programme in the SP mode and the remaining tape length becomes shorter than the recording time the recording tape speed is automatically changed to the LP mode Note that some noise will appear on the picture when the tape speed is changed To operate this function correctly the Tape Select setting in the VIDEO SETUP menu must be accurate see page 98 Timer recording with VPS PDC signals SLV D910N only Some broadcast systems transmit VPS or PDC signals
34. to watch the DVD VCR picture press TV VIDEO to display the VCR indicator in the display window Connect the mains lead to the mains Connecting the DVD VCR Additional connection To a satellite or digital tuner with Line Through Using the Line Through function you can watch programmes from a satellite or digital tuner connected to this DVD VCR on the TV even when the DVD VCR is turned off When you turn on the satellite or digital tuner this DVD VCR automatically sends the signal from the satellite or digital tuner to the TV without turning itself on Q z 5 Co e 4 D o Q Scart cable not supplied Signal flow 1 Connect the satellite or digital tuner to the LINE 3 connector as shown above 2 Turn off the DVD VCR To watch a programme turn on the satellite or digital tuner and the TV Notes e This function may not work with some types of satellite or digital tuners e When the DVD VCR is turned off set the TV to the video channel Connecting the DVD VCR 13 Step 4 Setting up the DVD VCR with the Auto Set Up function Before using the DVD VCR for the first time set up the DVD VCR using the Auto Set Up function With this function you can set TV channels and DVD VCR clock SETUP automatically 4 4 gt ENTER 1 Turn on your TV and set it to the video channel If your TV does not have a Scart EURO AV connector tune the TV to channe
35. to select Auto Setup then repeat step 3 e Auto preset can be performed by pressing ll on the unit continuously for 5 seconds or more during power off with no tape inserted 16 Setting up the DVD VCR with the Auto Set Up function Step 5 Selecting the TV system You must select the appropriate TV system for your area SET UP Before you start e Turn on the DVD VCR and your TV To control the DVD VCR set TV DVD VIDEO to DVD VIDEO on the remote page 9 e Set your TV to the video channel so that the signal from the player appears on the TV screen Q J Ko wn o Q t 4 4 gt ENTER Ifthe DVD player is in play mode you cannot display the setup menu Stop the DVD playback Press SET UP then press to select e OPTION OPTION then press ENTER O O lt gt Ye Language English Clock z n Install User Set Auto Power Off Off Screen Messages On ENTER RETURN Press to select Install then press ENTER Ault SEURI anual Setu The INSTALL menu appears Ty System IK Video Output CH CH32 ENTER RETURN Press to select TV System then press to select the appropriate TV system 9 Auto Setup Manual Setup Select G for the B G TV system or K for T System cyt Iqeo Outpu the D K TV system R
36. will be played in that order e A disc with many trees takes longer to start playback Some discs with many trees cannot be played back Notes e Depending on the software you use to create the DATA CD the playback order may differ from the illustration above The playback order above may not be applicable if there are more than a total of 200 albums and tracks in the DATA CD e The player can recognize up to 100 albums the player will count just albums including albums that do not contain MP3 audio tracks The player will not play any albums beyond the first 100 albums Of the first 100 albums the player will play no more than a combined total of 200 albums and tracks suonesedo jeuonppy GAC i Playing an MP3 audio track 81 Playing JPEG image files You can play JPEG image files on DATA CDs CD ROMs CD Rs CD RWs I gt 4 4 4 ENTER MENU TOP MENU DISPLAY 1 Press amp and place a DATA CD on the disc tray S then press amp to close the tray Select a Media Type When you load a DATA CD which contains AIMESE MP3 audio tracks and JPEG image files Select a Media Type menu appears If you load a DATA CD which contains only JPEG image files the Album display appears Then you can skip step 2 ENTER 2 Press to select JPEG then press Bo Album Photo 1 500 R ENTER The Album display will appears h If you do not press
37. with their TV programmes These signals ensure that your timer recordings are made regardless of broadcast delays early starts or broadcast interruptions To use the VPS PDC function set V P to On in step 2 above You can also use the VPS PDC function for a source connected to one or more of the LINE inputs Tips e To set the line input video source you can also use the INPUT SELECT button e To check change or cancel the programme setting see Checking changing cancelling timer settings on page 50 Notes e When setting the timer with VPS PDC signals enter the start times exactly as indicated in the TV programme guide Otherwise the VPS PDC function will not work e Ifthe VPS PDC signal is too weak or the broadcasting station failed to transmit VPS PDC signals the VCR will start recording at the set time without using the VPS PDC function The indicator flashes in the display window when you press 1 with no tape inserted The VPS PDC function is automatically set to off for the timer recording of a satellite programme SLV D910N only Recording TV programmes using the timer To watch another TV programme after setting the timer 1 Press TV VIDEO to display TV in the display window If your TV is connected to the VCR using A V connections set the TV to the TV s aerial input if not skip this step 3 Select another channel on the TV Tips To set the channel you can also
38. 2 IN L R Other VCR Player audio video cord not supplied N Signal flow 100 Editing Example C TV Your VCR Recorder Scart EURO AV Scart cable not supplied Signal flow How to connect to a stereo system Connect the LINE 2 IN 2 L R jacks on this DVD VCR to the audio output jacks on the stereo system using an audio cable not supplied Notes e Make sure you connect the plugs to jacks of the same colour Ifthe other VCR is a monaural type leave the red plugs unconnected e If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR select the input correctly to prevent a humming noise e When you connect another VCR to the LINE 3 or LINE 2 connector press INPUT SELECT to display L3 or L2 in the display window continued Editing suonesadg euoMIppy HOA H 101 102 Operation when recording on this VCR Before you start editing Turn on your TV and set it to the video channel e Press INPUT SELECT to display the connected line in the display window e Press SP LP to select the tape speed SP or ll E REC LP e Press SELECT VIDEO to control the VCR 1 Insert a source tape with its safety tab removed into the other playback VCR Search for the point to start playback and set it to playback pause 2 Insert a tape with its safety tab in place into this recording VCR S
39. CD or CD e Track repeats the current track e Disc repeats all of the tracks When playing a DATA CD MP3 audio e Track repeats the current track To return to normal play Select Off in step 2 or press CLEAR during repeat play Tip e When playing a DATA CD press REPEAT again to cancel repeat play 74 Various play mode functions Programme play Shuffle play Repeat play Changing the sound When playing a DVD recorded in multiple audio formats PCM Dolby Digital MPEG or DTS you can change the audio format If the DVD is recorded with multilingual tracks you can also change the language With CDs DATA CDs or VIDEO CDs you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers For example when playing a disc containing a song with the vocals on the right channel and the instruments on the left channel you can hear the instruments from both speakers by selecting the left channel AUDIO gt 1 AUDIO Press AUDIO during playback O ENG DOLBY DIGITAL 5 1CH 2 Press repeatedly to select the desired language audio setting e When playing a DVD Depending on the DVD the choice of language varies Refer to DVD Audio Subtitle Language on page 119 for the abbreviation of the language e When playing a VIDEO CD or CD The default setting is indicated in bold print
40. EUWIOJU EUOHPPY H 105 Picture Symptom Even though you set the aspect ratio in TV Type of the SCREEN SETUP menu the picture does not fill the screen Remedy The aspect ratio of the disc is fixed on your DVD There is no picture from your VCR connected to the LINE IN jacks The DVD player must be in standby mode to view pictures from your VCR Sound There is no sound e Re connect the connecting cord securely The connecting cord is damaged The player is connected to the wrong input jack on the amplifier receiver page 52 The amplifier receiver input is not correctly set The player is in pause mode or in Slow motion Play mode The player is in fast forward or fast reverse mode e Ifthe audio signal does not come through the DIGITAL AUDIO OUT OPTICAL or COAXIAL jack check the audio settings pages 55 Sound is noisy e When playing a CD with DTS sound tracks noise will come from the OUT AUDIO L R jacks page 35 or DIGITAL OUT OPTICAL or COAXIAL jack The sound volume is low The sound volume is low on some DVDs The sound volume may improve if you set Audio DRC to TV page 57 Operation The disc does not play The disc is turned over Insert the disc with the playback side facing down on the disc tray e The disc is skewed The player cannot play certain discs page 6 The region code on the D
41. IO SETUP menu MPEG audio signals If you connect a component that does not conform to the selected audio signal a loud noise or no sound will come out from the speakers affecting your ears or causing the speakers to be damaged e Even if you set 48kHz 96kHz PCM to 96kHz 24bit the sampling frequency is converted to 48 kHz 16 bit when a SURROUND mode page 76 is selected e The analog audio signals from AUDIO OUT L R jacks are not affected by 48kHz 96kHz PCM setting and keep their original sampling frequency level Audio Setup sjuswysn py pue sumas GAG i 57 58 Screen Setup Screen Setup allows you to set the screen according to the playback and connection conditions SET UP t 4 4 gt ENTER Press SET UP when the DVD player is in stop mode then press to select Ke3 DVD and press ENTER OY O g Qo On DVD SETUP Language Setup Audio Setup Screen Setup Parental Setup E 417 ENTER RETURN Us Press to select Screen Setup then press ENTER lt G lt gt TV Type SCREEN SETUP 4 3 Letter Box DVD LINE1 RGB Out Off DVD S Video Out On RETURN lt gt Press to select the setup item from the displayed list TV Type DVD LINE1 RGB Out or DVD S Video Out Screen Setup 4 CES Press
42. MENU LANGUAGE setting after playing the disc press amp to open and close the disc tray to activate the new setting then play the disc again 62 Setting the display or sound track language E Parental Control limiting playback by children DVD Playback of some DVDs can be limited according to a predetermined level such as the age of the users The parental control function allows you to set a playback limitation level Number buttons SET UP t 4 4 gt ENTER 1 SET UP Press SET UP when the DVD player is in stop BvD SETOR O mode then press to select Q DYD and press ENTER Language Setup Audio Setup Screen Setup Parental Setup a RETURN 2 ES Press to select Parental Setup then PARENTAL SETUP ress ENTER Koy Use Password No RETURN continued Parental Control limiting playback by children sjuawysnipy pue sumas GAG H 63 P gt lect Yes 3 ENS ress to select Yes e If you have not entered a password CREATE PASSWORD The display for registering a new password Erie basenon appears Enter a 4 digit password using the number SSS buttons RETURN The display for confirming the password CREATE PASSWORD appears Re enter Password Re enter the password RETURN e When you have already registered a PASS
43. N DELETE CLEAR 28 Presetting channels Press to select the row which you want to MANUAL TUNING change or enter the station name then press 5 gt 033 To display other pages for programme DECODER OFF positions 6 to 80 press repeatedly NAME aa Ava MEMORY ENTER RETURN 2 5 c Press to select NAME then press MANUAL TUNING oy Sig Y H 033 o E H DECODER OFF NAME 7 5 Q 8 Ava MEMORY ENTER CES Enter the station name MANUAL TUNING 1 Press to select a character gt 033 Each time you press the character DECODER changes as shown below NAME A B gt Z gt 0 gt 1 gt gt 9 Aver MEMORY ENTER RETURN gt A 2 Press to set the next character The next space flashes To correct a character press until the character you want to correct flashes then reset it You can set up to 4 characters for the station name Press ENTER to confirm the new name O Press RETURN then press SET UP to exit the menu RETURN SET UP Presetting channels 29 30 Setting the PAY TV Canal Plus decoder SLV D910N only You can watch or record PAY TV Canal Plus programmes if you connect a decoder not supplied to the DVD VCR Connecting a decoder S bl PAY TV Canal Hepi Hi d Plus decoder pp K Scart EURO AV E
44. Press to select Smart Trilogic then press Colour System ee NICAM Smart Trilogic Qe Oma OIE RETURN SET UP Y Press to set SMART TRILOGIC to ae ON or OFF e ON Picture sharpness is automatically SMART TRILOGIC ON adjusted SOFTEN __SHARPEN ae ras the picture sharpness RUN ATS To soften the picture press To sharpen the picture press RETURN Press c gt RETURN to return to the original screen Adjusting the picture tracking suonesadg euoMIppy HOA H 97 98 Changing menu options SET UP t 4 4 gt ENTER 1 SET UP Press SET UP when the DVD player is in stop OC mode then press to select OPTION or VIDEO and press ENTER OPTION orion i Ld Language English ow Clock b Install User Set re Auto Power Off mm Screen Messages Off On 4 ENTER RETURN SETUP VIDEO SETUP Sz Tape Select E180 Off 6 ovo Repeat Play Qo rex TREE GETav Setue SETUP 2 CES Press to select the option to change VIDEO SETUP Sz Tape Select E180 6 ovo Repeat Play Qe re Off pag RETURN SET UP Changing menu options 3 ES Press to change the setting
45. Press CLEAR at the point on the tape that you want to find later The counter in the display window resets to 0 00 00 To display the counter on the TV screen press DISPLAY during normal playback Tip e Adjust the picture using the TRACKING buttons if Streaks appear while playing in slow motion Bands appear at the top or bottom while pausing The picture shakes during pause Notes e Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the picture quality cannot be guaranteed e The counter resets to 0 00 00 whenever a tape is reinserted e The counter stops counting when it comes to a portion with no recording e Depending on your TV the following may occur while playing an NTSC recorded tape The picture becomes black and white The picture shakes No picture appears on the TV screen Black streaks appear horizontally on the TV screen The colour density increases or decreases e When 10 hours have passed the counter in the display window returns to 0 00 00 and the count starts over again e The sound is muted during playback at various speeds e The picture may show noise when playing at high speed in reverse e While playing a tape you can display the setup menu but the remote commander s function switches to DVD automatically Press SET UP to exit the menu e Stop disc playback while playing back a video e The picture returns to normal p
46. Press CLEAR during programme play To change or cancel a programme 1 Follow steps 1 and 2 of Creating your own programme Programme play 2 Press CLEAR The last programmed number is cancelled 3 Follow step 3 for new programming 72 Various play mode functions Programme play Shuffle play Repeat play Playing in random order Shuffle play You can shuffle the playback order of tracks Subsequent shuffling may produce a CLEAR different playing order PROGRAM gt ENTER 1 Repeat Press PROGRAM when the DVD player is in EROGEAM SHUFFLE PROGRAM stop mode O RETURN 2 CES Press to select SHUFFLE then press PROGRAM MENNENE ENTER ee RETURN To return to normal play Press CLEAR during shuffle play Tip e When SHUFFLE is selected shuffle play will continue until cancelled continued Various play mode functions Programme play Shuffle play Repeat play suonesodo jeuonippy GAC f 73 Playing repeatedly Repeat play DA cD You can play all of the titles or tracks on a disc or a single title chapter or track CLEAR repeatedly REPEAT 1 REPEAT Press REPEAT during playback PROGRAM off O 2 repeat Press REPEAT to select the item to be repeated PROGRAM O When playing a DVD e Chapter repeats the current chapter e Title repeats the current title on a disc When playing a VIDEO
47. S ONY 3 084 917 11 1 GB DVD Player Video Cassette Recorder Operating Instructions SLV D910N R 2003 Sony Corporation WARNING To prevent fire or shock hazard do not expose the unit to rain or moisture To avoid electrical shock do not open the cabinet Refer servicing to qualified personnel only Mains lead must only be changed at a qualified service shop CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT This appliance is classified as a CLASS 1 LASER product The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior CAUTION The use of optical instruments with this product will increase eye hazard As the laser beam used in this DVD player Video Cassette Recorder is harmful to eyes do not attempt to disassemble the cabinet Refer servicing to qualified personnel only WARNING Precautions Safety e This unit operates on 220 240 V AC 50 Hz Check that the unit s operating voltage is identical with your local power supply To prevent fire or shock hazard do not place objects filled with liquids such as vases on the apparatus e The unit is not disconnected from the AC power source mains as long as it is connected to the wall outlet even if the unit itself has been turned off Installing Do not install the unit in a confined space such as a book or similar unit Do not install the unit in an inclined posi
48. The default setting is indicated in bold print Off Select this when the player is connected to an audio component lacking a built in DTS decoder On Select this when the player is connected to an audio component with a built in DTS decoder Audio Setup e Audio DRC Dynamic Range Control Makes the sound clear when the volume is turned down when playing a DVD that conforms to Audio DRC This affects the output from the following jacks OUT AUDIO L R jacks DIGITAL AUDIO OUT OPTICAL or COAXIAL jack only when Dolby Digital is set to D PCM The default setting is indicated in bold print Standard Normally select this position TV Mode Makes the low sounds clear even if you turn the volume down e 48kHz 96kHz PCM Selects the sampling frequency of the audio signal The default setting is indicated in bold print 48kHz 16bit The audio signals of DVD VIDEOs are always converted to 48 kHz 16 bit 96kHz 24bit All types of signals including 96 kHz 24 bit are output in their original format However if the signal is encrypted for copyright protection purposes the signal is only output as 48 kHz 16 bit Notes e If you select the surround setting while playing a DVD the player does not output the following signals from the DIGITAL AUDIO OUT OPTICAL or COAXIAL jack Dolby Digital signals when you set Dolby Digital to D PCM in AUD
49. URO AV Scart cable not supplied Signal flow Setting the PAY TV Canal Plus decoder SLV D910N only Setting PAY TV Canal Plus channels To watch or record PAY TV Canal Plus programmes set your DVD VCR to receive the channels using the on screen display In order to set the channels correctly be sure to follow all of the steps below Before you start Turn on the DVD VCR and your TV To control the DVD VCR set TV DVD VIDEO to DVD VIDEO on the remote page 9 Set your TV to the video channel so that the signal from the player appears on the TV screen If the DVD player is in play mode you cannot display the setup menu Stop the DVD playback SET UP ENTER 4 4 4 gt 2 gt RETURN a m al Cc U OPTION then press ENTER O O lt gt Press SET UP then press to select Se Language English Glock nS Install User Set Auto Power Off Screen Messages OPTION ENTER RETURN Yt ENTER The INSTALL menu appears cS Ke lt gt Press to select Install then press Auto Setup Manual Setup TV System K Video Output CH CH32 RETURN 9 ENTER T gt Ke lt gt Press to select Manual Setup then press Av gt RETURN TV STATION TABLE CDE IJK SWAPPING DELETE OFF OFF OFF ENTER
50. VD does not match the player e Moisture has condensed inside the player The player cannot play CD Rs CD RWs DVD Rs or DVD RWs that are not finalized page 7 e Make sure the TV DVD VIDEO switch is set correctly e Select correctly VIDEO or DVD with SELECT DVD VIDEO button The MP3 audio track cannot be played page 78 The DATA CD is not recorded in the MP3 format that conforms to ISO9660 Level 1 Level 2 or Joliet The MP3 audio track does not have the extension MP3 The data is not formatted in MP3 even though it has the extension MP3 e The data is not MPEGI Audio Layer 3 data The player cannot play audio tracks in MP3PRO format The JPEG image file cannot be played The DATA CD is not recorded in JPEG format that conforms to ISO9660 Level 1 Level 2 or Joliet The JPEG image file does not have the extension JPG or JPEG The data is not formatted in JPEG even though it has the extension JPG or JPEG Length or width of the image is more than 4720 dots Troubleshooting Symptom Remedy The title of the MP3 audio album or The player can only display numbers and alphabet Other track is not correctly displayed characters are displayed as asterisks The disc does not start playing from Programme play shuffle play or repeat play has been the beginning selected pages 71 73 74
51. WORD CHECK password The display for entering the password appears Enter a 4 digit password using the number Enter Password buttons RETURN PARENTAL SETUP Use Password Yes Rating Level 1 Change Password PME RETURN SET UP ee 4 CES Press to select Rating Level then press RATING LEVEL Q ENTER Level 8 Adult Level 7 Level 6 Level 5 Level 4 Level 3 Level 2 Level 1 Kids Safe DE ENTER RETURN Press to select the level you want then press ENTER Level 8 Adult Level 7 The options are as follows revel Level 4 RATING LEVEL Level 8 Adult Level 7 lt gt Level 6 lt gt evel 2 Level 1 Kids Safe ENTER RETURN Level 5 gt Level 4 gt Level 3 gt Level 2 gt Level 1 Kids Safe The lower the value the stricter the limitation 6 SETUP Press SET UP to exit the menu 64 Parental Control limiting playback by children To change the password 1 Select Change Password in step 4 on page 64 The display for entering a new password appears 2 Enter a new 4 digit password using the number buttons The display for confirming the password appears 3 Re enter the new password To turn off the Parental Control function Set Use Password to No in step 3 on page 64 To play a disc for which Parental Cont
52. age files You can play JPEG image files on CD ROMs CD Rs or CD RWs However the discs must be recorded according to ISO9660 level 1 level 2 or Joliet format for the player to recognize the files You can also play discs recorded in Multi Session See the instructions of the CD R RW device or recording software not supplied for details on the recording format To play a Multi Session CD This player can play Multi Session CDs when an JPEG image file is located in the first session Any subsequent JPEG image files recorded in the later sessions can also be played back When audio tracks and images in music CD format or video CD format are recorded in the first session only the first session will be played back 84 Playing JPEG image files Tip If you add numbers 01 02 03 etc to the front of the file names the files will be played in that order Notes The system can play the extension JPG or JPEG Some CD Rs or CD RWs cannot be played on this system depending on file format If you add the extension JPG or JPEG to data not in JPEG format the display will be blank Depending on the disc or the size of image files playback may take some time to start suonesedo jeuonppy GAC i Playing JPEG image files 85 Playing VIDEO CDs with MENU ON OFF functions The PBC Playback control function allows you to search and perform other operations interactively PBC playback follows a
53. ander You can use this remote commander to operate this DVD VCR and a Sony TV Buttons on the remote commander marked with a dot can be used to operate your Sony TV If the TV does not have the TV DVD VIDEO symbol near the remote sensor this remote commander will not SELECT VIDEO operate the TV SELECT DVD D 2008 2009 To operate Set TV DVD VIDEO to the DVD player DVD VIDEO then press SELECT DVD and point at the remote sensor at the DVD VCR the VCR DVD VIDEO then press SELECT VIDEO and point at the remote sensor at the DVD VCR your TV TV and point at the remote sensor at your TV Notes With normal use the batteries should last about three to six months e If you do not use the remote commander for an extended period of time remove the batteries to avoid possible damage from battery leakage e Do not use a new battery with an old one Do not use different types of batteries e Do not leave the remote commander in an extremely hot or humid place Do not drop any foreign object into the remote casing particularly when replacing the batteries Do not expose the remote sensor to direct light from the sun or lighting apparatus Doing so may cause a malfunction continued Setting up the remote commander 9 10 Controlling other TVs with the remote commander The remote commander is preprogrammed to control non Sony TVs If your TV is listed in th
54. ay window when setting the recording duration time 90 Quick Timer Recording Recording stereo and bilingual programmes In the ZWEITON German stereo system This VCR automatically receives and records stereo and bilingual programmes based on the ZWEITON system When a stereo or bilingual programme is received the STEREO indicator appears in the display window To select bilingual sound while recording Press AUDIO to select the sound you want To listen to On screen display Display window Main MAIN STEREO Sub SUB STEREO Main and sub MAIN SUB STEREO Standard sound MONO STEREO Usually the main channel heard from both the left and right in bilingual programmes To select stereo programme while recording To listen to On screen display Display window Stereo STEREO STEREO Left channel LCH STEREO Right channel RCH STEREO Standard sound LCH RCH STEREO Usually the mixed sound of left and right channels in stereo programmes In the NICAM system This VCR receives and records stereo and bilingual programmes based on the NICAM system NICAM appears on the TV screen When a stereo or bilingual programme is received the STEREO indicator appears in the display window To record a NICAM programme NICAM in the USER SET menu should be set to On initial setting To check the menu setting see page 103 for details continued Recording stereo and bilingual programmes suonesa
55. back picture does not appear e Make sure the TV is set to the channel for the VCR If on the TV screen you are using a monitor set it to video input S Ifthe VCR is connected to the TV with the Scart cable z make sure the VCR indicator is lit in the display window a Use the TV VIDEO button on the remote commander to light up the VCR indicator continued Troubleshooting uonewoj uj euo ppy i 107 Playback Symptom The picture is not clear Remedy Existing broadcasts may interfere with the VCR Reset the RF channel output of your VCR page 16 e Adjust the tracking with the TRACKING buttons e The video heads are dirty see the last page of Troubleshooting Clean the video heads using a Sony video head cleaning cassette If a Sony cleaning cassette is not available in your area have the heads cleaned at your nearest Sony service facility a standard service charge will be required Do not use a commercially available liquid type cleaning cassette other than Sony s as it may damage the video heads e The video heads may have to be replaced Consult your local Sony service facility for more information The picture has no colour The Colour System option in the USER SET menu is set to the wrong position Set the option to conform to the system that the tape was recorded in The picture rolls vertically during picture search e Adjust the vertical hold control on
56. de is selected with no tape inserted or when the DVD VCR is turned off Setting the clock 21 Step 8 Presetting channels If some channels could not be preset using the Auto Set Up function you can preset them manually SET UP Before you start Turn on the DVD VCR and your TV e To control the DVD VCR set TV DVD VIDEO to DVD VIDEO on the remote page 9 e Set your TV to the video channel so that the signal from the player appears on the TV screen t 4 4 gt ENTER Ifthe DVD player is in play mode you Po pay gt gt RETURN cannot display the setup menu Stop the DVD playback O O lt gt Press SET UP then press to select 2 SETON OPTION then press ENTER Language English Clock Install User Set Auto Power Off Screen Messages ENTER RETURN SET UP YG Press to select Install then press ENTER Auto Setup ta Manual Setul The INSTALL menu appears S TV System K Qo Video Output CH CH32 lt gt lt gt 4 ENTER RETURN SETUP 22 Presetting channels Press to select Manual Setup then press ENTER TV STATION TABLE IJK av gt SWAPPING ENTER RETURN CLEAR Q fel 3 Press to select the row which you want to MANUAL TUNING Q preset then pre
57. der function set MPEG to MPEG in AUDIO SETUP menu page 55 Otherwise no sound or a loud noise will come from the speakers A V Receiver hookup 53 S Video hookup Make audio connections using the OUT AUDIO L R jacks or DIGITAL AUDIO OUT OPTICAL or COAXIAL jacks when you use S VIDEO hookup Use this hookup if your TV has an S VIDEO input jack e Connect an S VIDEO cord not supplied You will enjoy high quality images Signal flow DVD only oN Coaxial Optical digital digital cord cord not S VIDEO cord not a supplied not supplied Remove jack cap before connecting to audio to coaxial or optical input Audio cord supplied td i input TV or AV amplifier Notes e Set DVD S Video Out to On in the SCREEN SETUP menu page 58 to view pictures from the S VIDEO jack The connection using S VIDEO OUT jack is only for the DVD player 54 S Video hookup DVD Settings and Adjustments Audio Setup Audio Setup allows you to set the sound according to the playback and connection conditions SET UP t 4 4 gt ENTER Press SET UP when the DVD player is in stop mode then press to select DYD onl a m 4 Cc U 3 O DVD SETUP Fanguags Setup udio Setul and press ENTER Screen Setup Parental Setup ENTER E gt D RETURN Press to s
58. do euoMppy HOA H 91 To select the sound while recording Press AUDIO to select the sound you want Stereo programmes To listen to On screen display Display window Stereo NICAM STEREO STEREO Left channel NICAM LCH STEREO Right channel NICAM RCH STEREO Left and right channels NICAM LCH RCH STEREO Usually the mixed sound of left and right channels Bilingual programmes To listen to On screen display Display window Main NICAM MAIN STEREO Sub NICAM SUB STEREO Main and sub NICAM MAIN SUB STEREO Standard sound NICAM MONO STEREO Usually the main sound monaural Selecting the sound during Hi fi playback Press AUDIO to select the sound you want To listen to On screen display Display window Stereo STEREO STEREO Left channel LCH STEREO Right channel RCH STEREO Mix sound MIX STEREO Mono sound MONO No indicator The mixed sound of left and right channels and the normal mono audio track 92 Recording stereo and bilingual programmes How sound is recorded on a video tape The VCR records sound onto two separate tracks Hi fi audio is recorded onto the main track along with the picture Monaural sound is recorded onto the normal audio track along the edge of the tape Stereo Bilingual Usually mixed Normal audio track left right channels Usually main sound monaural Hi fi audio track main track Stereo sound Main left channel left right channels
59. e 2 Press gt ANGLE P SQPB to start SQPB 3 GLE ress SQPB to start SQ Notes e You cannot use the SQPB function for recording The playback display will be distorted if you use the SQPB function with a normal VHS format tape e When you eject the tape the VCR automatically returns to normal mode e Playback of tapes recorded in EP Extended Play mode on an NTSC system is not guaranteed 88 Playing a tape with SQPB function Quick Timer Recording After you have started recording you can have the VCR stop recording automatically after a specified duration REC 1 REC While recording press REC No IEI 2 REC Press REC repeatedly to set the duration time O In SP mode Each press advances the time in increments of 30 minutes 0 30 1 00 gt 4 00 gt 4 30 Normal recording In LP mode Each press advances the time as shown below 0 30 gt 1 00 8 00 9 00 gt Normal recording The tape counter decreases minute by minute to 0 00 then the VCR stops recording continued Quick Timer Recording suonesadg euoMIppy HOA j 89 To extend the duration Press REC repeatedly to set a new duration time To cancel the duration Press REC repeatedly until the indicator disappears and the VCR returns to normal recording mode To stop while recording Press W Note e You cannot display the current tape time in the displ
60. e following table set the appropriate manufacturer s code number 1 Set TV DVD VIDEO at the top of the remote commander to TV Hold down I Q and enter your TV s code number using the number buttons Then release I Now you can use the I D VOL PROG MUTING TV VIDEO 0 9 and buttons to control your TV You can also use the buttons marked with a dot to control a Sony TV To control the DVD VCR reset TV DVD VIDEO to DVD VIDEO for Sony TV only Code numbers of controllable TVs If more than one code number is listed try entering them one at a time until you find the one that works with your TV Manufacturer Code number Manufacturer Code number Sony 01 02 Panasonic 17 49 Akai 68 Philips 06 07 08 Ferguson 52 Saba 12 13 Grundig 10 11 Samsung 22 23 Hitachi 24 Sanyo 25 JVC 33 Sharp 29 Loewe 45 Telefunken 36 Mivar 09 70 Thomson 43 NEC 66 Toshiba 38 Nokia 15 16 69 Notes If you enter a new code number the code number previously entered will be erased Ifthe TV uses a different remote control system from the one programmed to work with the DVD VCR you cannot control your TV with the remote commander When you replace the batteries of the remote commander the code number may change Set the appropriate code number every time you replace the batteries Setting up the remote commander St
61. earch D for the point to start recording and press Ill to set it to playback pause REC Press REC on this VCR to set it to recording pause O To start editing press the Il pause buttons on both VCRs at the same time Editing To stop editing Press the Ml stop buttons on both VCRs Tip To cut out unwanted scenes while editing press Il on this VCR when an unwanted scene begins When it ends press Ill again to resume recording Additional Information General setup information Changing setup options SET UP t 4 4 gt ENTER Press SET UP when the DVD player is in stop mode then press to select OPTION and press ENTER i OY O Qro ma OPTION Language English Clock j Install User Set Auto Power Off Screen Messages ENTER RETURN Press to select User Set then press ENTER The USER SET menu appears lt D Colour System Auto NICAM On Smart Trilogic RETURN SET UP Press to select the option to change y es lt gt i General setup information continued UOHEUWIOJU EUOHPPY 103 104 Press to change the setting 5 setup Press SET UP to exit the menu O Menu choices Initial settings are indicated in bold print Menu option Colou
62. ed in the disc take priority over the DVD SETUP menu settings and not all the functions described may work Depending on the DVD 4 3 Letter Box may be selected automatically instead of 4 3 Pan Scan or vice versa The connection using S VIDEO OUT jack is only for the DVD player When you select On in the DVD LINE1 RGB Out setting DVD S Video Out is set to Off automatically When you select On in the DVD S Video Out setting DVD LINE RGB Out is set to Off automatically Setting the display or sound track language You can set various languages for the disc s menu sound track or subtitle SET UP t 4 4 gt ENTER Press SET UP when the DVD player is in stop DVD SETUP mode then press to select DVD Ea and press ENTER Bee Sereen Setup Qe Parental Setup oe ENTER RETURN SET UP ol OY O JR 2 Press to select Language Setup then TaNGUAGE SETUP MS press ENTER DVD Menu English Audio Original The LANGUAGE SETUP menu appears Sue ove RETURN continued Setting the display or sound track language sjuswysnipy pue sumas GAG H 61 Press to select the language setup item from the displayed list DVD Menu Audio or Subtitle Then press ENTER 4 CES Press t
63. elect Audio Setup then press ENTER Dolby Digital MPEG 9 g DTS T gt CO lt gt Audio DRC 48kHz 96kHz PCM AUDIO SETUP D PCM PCM Off Standard 48kHz 16bit RETURN Press to select the setup item from the displayed list Y PCM Dolby Digital MPEG DTS Audio DRC or 48kHz 96kHz continued Audio Setup sjuawysn py pue sumas GAG H 55 56 4 CES Press to select an item JOY lt gt 5 SET UP Press SET UP to exit the menu Q Menu choices e Dolby Digital Selects the type of Dolby Digital signal The default setting is indicated in bold print D PCM Select this when the player is connected to an audio component lacking a built in Dolby Digital decoder Dolby Digital Select this when the player is connected to an audio component with a built in Dolby Digital decoder MPEG Selects the type of MPEG audio signal The default setting is indicated in bold print PCM Select this when the player is connected to an audio component lacking a built in MPEG decoder If you play MPEG audio sound tracks the player outputs stereo signals via the DIGITAL AUDIO OUT OPTICAL or COAXIAL jack MPEG Select this when the player is connected to an audio component with a built in MPEG decoder DTS Selects whether or not to output DTS signals
64. ep 3 Connecting the DVD VCR Note that Advanced Hookups page 52 explains additional hookup methods that will optimize the picture and sound for a true hometheatre experience If your TV has a Scart EURO AV connector see page 12 If your TV does not have a Scart EURO AV connector Q J Ko w o Q AERIALIN A to mains Aerial cable supplied A Signal flow 1 Disconnect the aerial cable from your TV and connect it to 1f on the rear panel of the aF DVD VCR 2 Connect of the DVD VCR and the I aerial input of your TV using the supplied aerial cable 3 Connect the mains lead to the mains Note e When you connect the DVD VCR and your TV only with an aerial cable you have to tune your TV to the DVD VCR see page 14 continued Connecting the DVD VCR 11 12 If your TV has a Scart EURO AV connector W Signal flow Scart cable not supplied LINE 1 EURO AV lead to mains Disconnect the aerial cable from your TV and connect it to 1f on the rear panel of the DVD VCR Connect of the DVD VCR and the aerial input of your TV using the supplied aerial cable Connect LINE 1 EURO AV on the DVD VCR and the Scart EURO AV connector on the TV with the optional Scart cable This connection improves picture and sound quality Whenever you want
65. ge and press to CLEAR a ENED GLEAE SETUP HMA ENER CLEAR O e To cancel the setting press CLEAR Press to select setting you want to change PR DATE START STOP SPEED V P or cancel 35 MO30 20 00 21 00 SP Off y 20 WE 2 22 00 23 LP Off To change the setting press to flash the 60 TU 1 20 30 22 change it C gt Press ENTER to confirm the setting If any settings remain turn off the VCR to return to recording standby When the timer settings overlap The programme that starts first has priority and the second programme starts recording only after the first programme has finished If the programmes start at the same time the programme listed first in the menu has priority Programme 1 m about 20 seconds Programme 2 i will be cut off Programme 1 Programme 2 about 20 seconds will be cut off Checking changing cancelling timer settings suoeiad 31Sseg H 51 Advanced Hookups EOE l A V Receiver hookup Use this hookup if your A V receiver has a Dolby Surround Pro Logic decoder and 3 to 6 speakers You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi channel audio Dolby Digital discs Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories DVD VCR EN Stereo audio cord red suppl
66. hannels 21 to 69 Aerial out 75 ohm asymmetrical aerial socket Tape speed SP PAL MESECAM 23 39 mm s recording playback NTSC 33 35 mm s playback only LP PAL MESECAM 11 70 mm s recording playback NTSC 16 67 mm s playback only EP NTSC 11 12 mm s playback only Maximum recording playback time 10 hrs in LP mode with E300 tape Rewind time Approx min with E180 tape Specifications Inputs and outputs LINE 1 EURO AV 21 pin Video input pin 20 Audio input pins 2 and 6 Video output pin 19 Audio output pins 1 and 3 LINE 2 IN 2 L R VIDEO IN phono jack 1 Input signal 1 Vp p 75 ohms unbalanced sync negative AUDIO IN phono jacks 2 Input level 327 mVrms Input impedance more than 47 kilohms LINE 3 21 pin Video input pin 20 Audio input pins 2 and 6 OUT VIDEO OUT phono jack 1 Output signal 1 Vp p 75 ohms unbalanced sync negative AUDIO OUT phono jacks 2 Standard output 327 mVrms Load impedance 47 kilohms Output impedance less than 10 kilohms DIGITAL OUT OPTICAL Optical output jack 18 dBm wave length 660 nm DIGITAL OUT COAXIAL Phono jack 0 5 Vp p 75 ohms S VIDEO OUT 4 pin mini DIN Y 1 0 Vp p C 0 3 Vp p PAL 0 286 Vp p NTSC 75 ohms Timer section Clock Quartz locked Timer indication 24 hour cycle Timer setting 6 programs max General Power requirements 220 240 V AC 50 Hz Power consumption 25 W Operating temperature 5 C to 40 C Storage
67. he remaining time Press DISPLAY twice With the display on press DISPLAY again to check the remaining time 0 00 22 Time counter REMAIN Remaining tape length continued Recording TV programmes 43 In order to get an accurate remaining time indication be sure Tape Select in the VIDEO SETUP menu is set according to the tape type you use see page 98 Maximum Recording Time Tape Length SP LP E 180 3 hrs 6 hrs E 240 4 hrs 8 hrs E 260 4 hrs 20 mins 8 hrs 40 mins E 300 5 hrs 10 hrs To watch another TV programme while recording 1 Press TV VIDEO to display TV in the display window 2 Select another channel on the TV To watch a DVD while recording 1 Press SELECT DVD to control the DVD player 2 Press amp and place the disc on the disc tray 3 Press D gt The disc tray closes and the DVD player starts playback The TV screen will automatically change to the DVD playback screen To save a recording To prevent accidental erasure break off the safety tab as illustrated To record on the tape again cover the tab hole with adhesive tape O Safety tab S Tips To select a programme position you can use the number buttons on the remote commander For two digit numbers for example press 2 and 3 to select PR 23 If you connect additional equipment to a LINE connector or jack you can select the input signal using the INPUT SELECT
68. ied white to OUT AUDIO L R Signal flow to audio input J J Speakers Rey ee eae Amplifier receiver with Dolby Surround decoder Rear L Rear R 5 f Subwoofer Centre 52 A V Receiver hookup Speakers Front L Front R E Use this hookup if your A V receiver has a Dolby Digital MPEG audio or DTS decoder a digital input jack and 6 speakers This connection will allow you to use the Dolby Digital MPEG audio or DTS decoder function of your AV amplifier receiver You are not able to enjoy the surround sound effects of this player You must make connections using Ej and DTS and DTS Digital Out are trademarks of Digital Theater Systems Inc DVD VCR Stereo audio cord red supplied COAXIAL gt white 2 D ard or f to DIGITAL AUDIOOUT 3 COAXIAL or OPTICAL g to OUT AUDIO L R Optical digital I cord not Coaxial digital cord 2 supplied not supplied a Remove jack mo cap before J J 7 connecting Signal flow red to audio input to coaxial or optical J J J digital input Speakers Speakers AV amplifier receiver having a decoder Rear R Front R Note e After you have completed the connection be sure to set Dolby Digital to Dolby Digital and DTS to On in AUDIO SETUP menu page 55 If your AV amplifier receiver has an MPEG audio deco
69. io equipment without a DTS decoder do not set DTS to On in AUDIO SETUP menu page 56 A loud noise may come out from the speakers affecting your ears or causing the speakers to be damaged DTS and DTS Digital Out are trademarks of Digital Theater Systems Inc Guide to the on screen display You can check disc information during playback t 4 4 gt ENTER 2 gt RETURN The displayed contents differ according to the type of disc being played DISPLAY Press DISPLAY The following information appears type of disc current title track chapter counter position voice language subtitle language and surround setting Refer to DVD Audio Subtitle Language on page 119 for the abbreviation of the language Type of disc Current title track number 05 suoeiado o1seg j Current chapter number 03 Counter position T0 01 09 Voice language 839 ENG 5 1CH Subtitle language ENG 3 5 Surround setting Of ENTER You can playback the desired title track chapter or counter position using this menu To playback the desired title track or chapter DVD o 1 Press to select the desired item o3 _ 70 01 09 i SB ENG 5 1CH 2 Press to change the item Bill ENG 3 5 gt Off 3 Press ENTER to start playback guan 4 Press DISPLAY or amp RETURN to turn off the menu The title track or chapter icon will appear on the DVD playbac
70. k screen followed by the current title track or chapter number and the counter position continued Guide to the on screen display 37 To playback from the desired title track counter 05 D position a 03 1 Press to select the counter position icon er ENG 3 5 Enter the desired elapsed playing time of the current me Of IMP 0 9 ENTER title track using the number buttons 3 Press ENTER to start playback 4 Press DISPLAY or RETURN to turn off the menu Tip e You can change the counter position information playing time or remaining time using lt gt DVD and CD only DVD Indication Counter information T ee pee Elapsed playing time of the current title T ee pee Remaining time of the current title C k Elapsed playing time of the current chapter C ep eK Remaining time of the current chapter cD Indication Counter information T 1 ee pee Elapsed playing time of the current track T 1 e pee Remaining time of the current track D pee Elapsed playing time of the disc D k k Remaining time of the disc Notes The display may not change as operated depending on the disc The display window continue indicating the playing time even when the counter position information on the on screen display is being changed 38 Guide to the on screen display Playing a tape Before you start Turn on
71. l 32 the initial RF channel for this DVD VCR Refer to your TV manual for TV tuning instructions If the picture does not appear clearly see To change the RF channel on page 16 2 Connect the mains lead to the mains TANGUAGEISET e SLV D910N The DVD VCR automatically turns on and the LANGUAGE SET menu appears e SLV D910R The DVD VCR automatically turns on and gt English Magyar Cesky Polski Russian Turkish ENTER RETURN SET UP auto tuning starts LANGUAGE SET and COUNTRY SELECTION are skipped only for this model 14 Setting up the DVD VCR with the Auto Set Up function lt gt Press to select the desired language then COUNTRY SELECTION press ENTER repeatedly Bi The COUNTRY SELECTION menu appears TA gt Others GR HU The abbreviations of the countries HUERTA memen FY are as follows Ei Abbreviation Country Abbreviation Country o A Austria E Spain a B Belgium S Sweden DK Denmark CH Switzerland FIN Finland TR Turkey D Germany GR Greece NL Netherlands HU Hungary I Italy PL Poland N Norway CZ Czech P Portugal lt gt Press to select the abbreviation of your country from the table in step 3 then press ENTER If your country does not appear select Others The DVD VCR starts searching for all of the receivable chan
72. layback from slow motion in reverse in 30 seconds Playing a tape suoleiado oiseg 41 Recording TV programmes Before you start a Turn on the DVD VCR and your TV e Switch the input selector on your TV so VO that the signal from the player appears on the TV screen Set TV DVD VIDEO to DVD VIDEO PROG then press SELECT VIDEO to control the VCR page 9 To record from a decoder turn it on e Make sure the tape is longer than the total recording time SP LP TV VIDEO INPUT SELECT REC E DISPLAY 1 Insert a tape with its safety tab in place 42 Recording TV programmes 2 PROG TRACKING INPUT SELECT O e To record a normal channel press PROG until the programme position number you want appears in the display window To record from a decoder or other source connected to one or more of the LINE inputs press INPUT SELECT until the connected line appears in the display window OO VCR SP LP O Press SP LP to select the tape speed SP or LP LP Long Play provides recording time twice as long as SP However SP Standard Play produces better picture and audio quality Oo VCR REC O Press REC to start recording suoleiado diseg The recording indicator lights up red in the display window OO VCR Recording indicator To stop recording Press W To check t
73. n 4 O T m zZ The contents of the menu vary from disc to disc O z m Zz cS Press to select the item you want to play or change 9 You can also use the number buttons to select the item ES SS OOO OLOCO O 66 Using the DVD s menu 3 Press ENTER S To turn off the DVD s menu Press W Note e Depending on the DVD you may not be able to use the TOP MENU button Using the DVD s menu suonesedo jeuonippy GAC j 67 Zooming into a scene You can zoom into a scene during playback or still mode Q00 ZOOM To zoom into a JPEG image see Playing QOQOQ0OQQ Q JPEG image files on page 82 O000 0 0099 099 9 opo t 4 4 gt ENTER 1 MUTING Press ZOOM ZOOM O aq appears 2 CES Press to move amp to the position where you want to zoom in 3 CES Press ENTER repeatedly to change the magnification R Each time you press the button the magnification changes as shown below 2x 4x 2x normal magnification Notes e You cannot use 4X magnification when you play VIDEO CDs The zoom function may not work depending on the DVD 68 Zooming into a scene Changing the angles If various angles multi angles for a scene are recorded on the DVD 9 appears in the display when you press ANGLE during playback This means that you can change the viewing angle ANGLE
74. n a car parked in direct sunlight as the temperature may rise considerably inside the car e After playing store the disc in its case e Clean the disc with a cleaning cloth Wipe the disc from the center out Nad Se Do not use solvents such as benzine thinner commercially available cleaners or anti static spray intended for vinyl LPs 8 Getting Started Step 1 Unpacking Check that you have received the following items with the DVD VCR e Remote commander e Aerial cable e R6 size AA batteries e Audio cord pinplug x2 gt pinplug x2 e Video cord pinplug x1 gt pinplug x1 Note The supplied remote commander is for the exclusive use of this DVD VCR Check your model name The instructions in this manual are for the 2 models SLV D910N and SLV D910R Check your model name by looking at the rear panel of your DVD VCR SLV D910N is the model used for illustration purposes Any difference in operation is clearly indicated in the text for example SLV D910N only Unpacking Step 2 Setting up the remote commander Inserting the batteries Insert two size AA R6 batteries by matching the and on the batteries to the diagram inside the battery compartment 72 Insert the negative end first a then push in and down until the Oo positive end clicks into a position Using the remote Remote sensor comm
75. nels and presets them in the RETURN appropriate order for your local area AUTO SETUP If you want to change the order of the channels or disable unwanted programme positions see Changing disabling programme positions on page 24 After the search is complete the current time appears for any stations that transmit a time signal If the time does not appear set the clock manually See Setting the clock on page 20 continued Setting up the DVD VCR with the Auto Set Up function 15 To cancel the Auto Set Up function Press SET UP To change the RF channel If the picture does not appear clearly on the TV change the RF channel on the DVD VCR and TV Select Install in the OPTION menu then press to select Video Output CH Select the RF channel by pressing the buttons and press ENTER Then tune the TV to the new RF channel so that a clear picture appears Tip e If you want to change the language for the on screen display from the one preset in the Auto Set Up function see page 19 Notes e Whenever you operate the Auto Set Up function some of the settings timer etc will be reset If this happens you have to set them again e Auto preset starts automatically only when you plug in the mains lead for the first time after you purchase the DVD VCR If you want to use the Auto Set Up function again select Install in the OPTION menu then press
76. o select the desired language then press ENTER e DVD MENU LANGUAGE You can select the desired language for the DVD MENU LANGUAGE gt English a Magyar disc s menu DVD Menu Cesky Polski Russian Turkish Others ENTER RETURN SET UP e AUDIO LANGUAGE AUDIO LANGUAGE Switches the language of the sound track Egish When you select Original the language Cesky given priority in the disc is selected Russian Turkish gt Original Others RETURN SET UP e SUBTITLE LANGUAGE Switches the language of the subtitle gt Engis recorded on the DVD Subtitle coe Polski Russian Turkish Others RETURN SET UP SUBTITLE LANGUAGE 5 setup Press SET UP to exit the menu Tip e If you select Others in step 4 an additional language menu appears Press to select the desired Sates Re a rangals ortugues inai language then press ENTER Dansk Suomi Japanese Deutsch Afrikaans Italiano Svenska Arabic Nederlands Norsk Chinese Thai Espa ol Greek Korean DVD MENU LANGUAGE Mele ENTER RETURN SET UP Notes e When you select a language that is not recorded on the DVD in step 4 one of the recorded languages will be automatically selected e Playback settings stored in the disc take priority over the DVD SETUP settings and not all the functions described may work If you change the DVD
77. of cellophane tape or a Sticker still left on it Note Some DVD RWs DVD Rs DVD RWs DVD Rs or CD Rs CD RWs cannot be played on this player due to the recording quality or physical condition of the disc or the characteristics of the recording device Furthermore the disc will not play if it has not been correctly finalized For more information see the operating instructions for the recording device Note that discs created in the Packet Write format cannot be played Note on playback operations of DVDs and VIDEO CDs Some playback operations of DVDs and VIDEO CDs may be intentionally set by software producers Since this player plays DVDs and VIDEO CDs according to the disc contents the software producers designed some playback features may not be available Also refer to the instructions supplied with the DVDs or VIDEO CDs Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc CD standard Recently various music discs encoded with copyright protection technologies are marketed by some record companies Please be aware that among those discs there are some that do not conform to the CD standard and may not be playable by this product Notes about discs e To keep the disc clean handle the disc by its edge Do not touch the surface e Do not expose the disc to direct sunlight or heat sources such as hot air ducts or leave it i
78. ol the VCR page 9 When using a decoder turn it on e Insert a tape with its safety tab in place Make sure the tape is longer than the total recording time If the DVD player is in play mode you cannot display the setup menu Stop the DVD playback 1 SELECT VIDEO CLEAR TV VIDEO TIMER INPUT SELECT 4t 4 4 gt ENTER 1 suBTITLE Press TIMER TIMER O The timer programming menu appears PR DATE START STOP SPEED V P Recording TV programmes using the timer 9 INPUT SELECT Set the date start and stop times programme position tape speed and VPS PDC function 1 Press to select each item in turn 2 Press to set each item To correct a setting press to return to that setting and reset Weee To record the same programme every day or the same day every week see Daily weekly recording on page 48 To use the VPS PDC function set V P to On For details about the VPS PDC function see Timer recording with VPS PDC signals SLV D910N only on page 48 To record from a decoder or other source connected to one or more of the LINE inputs press INPUT SELECT to display the connected line in the PR position SLV D910N only lt DY O O r m gt a Press ENTER to confirm the setting To enter another setting press to select
79. ommercial Skip 40 Connecting the DVD VCR and your TV 11 to a TV with a Scart EURO AV connector 12 to video equipment 100 Counter 41 D DATA CD 6 78 82 Disabling the programme positions 26 DOLBY DIGITAL 52 75 DTS 53 75 DVD 6 E Editing 100 H Handling discs 7 Hi fi audio track 93 Index scan 94 J JPEG 6 82 L Language selecting 19 LP mode 43 M Manual fine tuning 24 Monaural 92 Monitoring during playback 92 during recording 91 MP3 6 78 N NICAM broadcasts 91 Normal audio track 93 P Parental Control 63 PAY TV 30 PBC Playback control 86 PDC Programme Delivery Control 48 Picture adjustment 96 Playback 33 39 at various speeds 35 40 frame by frame 34 40 JPEG image files 82 MP3 audio track 78 programme play 71 repeat play 74 selecting the sound 91 92 shuffle play 73 skip 40 slow motion 35 40 VIDEO CDs 86 Presetting channels 22 Programme play 71 Sony Corporation Printed in Indonesia R Recording 42 quick timer recording 89 saving 44 while watching another programme 44 49 Repeat play 74 RF channel 14 16 Rotation 83 S Safety tab 44 Scart connection 12 Searching at various speeds 35 40 Shuffle play 73 Slide show 84 Smart trilogic 96 SP mode 43 STEREO 75 91 Subtitle 70 T Timer setting daily weekly recording 48 quick timer recording 89 Tracking adjustment see Adjusting U Usable discs 6 V VIDEO CD 6 VPS Video Programme System 48
80. or PROG buttons The DISPLAY information appears on the TV screen indicating information about the tape but the information will not be recorded on the tape If you do not want to watch TV while recording you can turn off the TV When using a decoder make sure to leave it on 44 Recording TV programmes Notes If a tape has portions recorded in both PAL MESECAM and NTSC systems the time counter reading will not be correct This discrepancy is due to the difference between the counting cycles of the two video systems You cannot watch a PAY TV Canal Plus programme while recording another PAY TV Canal Plus programme When you insert a non standard commercially available tape the remaining time may not be correct The remaining time is intended for rough measurement only About 30 seconds after the tape begins playback the tape remaining time will be displayed You cannot record a DVD to a VCR tape To watch a TV programme during video recording stop disc playback suoneiado oiseg i Recording TV programmes 45 46 Recording TV programmes using the timer VHS You can preset up to six programmes at a time Before you start e Check that the DVD VCR clock is set to the correct time Turn on the DVD VCR and your TV e Switch the input selector on your TV so that the signal from the player appears on the TV screen e Set TV DVD VIDEO to DVD VIDEO then press SELECT VIDEO to contr
81. play mode is cancelled when you open the disc tray the player enters standby mode by pressing I G Creating your own programme Programme play You can play the contents of a disc in the order you want by arranging the order of the tracks on the disc to create your own programme You can programme up to 20 tracks CLEAR PROGRAM t 4 4 gt ENTER 1 Repeat Press PROGRAM when the DVD player is in EROGEN SHUFFLE PROGRAM stop mode O RETURN continued Various play mode functions Programme play Shuffle play Repeat play suonesodo jeuonppy GAC j 71 Press to select PROGRAM then press ENTER PROGRAM 01 9 Track Program Order o2 os o E7 06 07 08 10 11 12 14 15 16 gt atten ES lt gt RETURN CLEAR Press to select the track number you want to programme then press ENTER PROGRAM 02 9 Track Program Order ES lt gt 02 03 04 O1i lt 06 07 08 Pas 10 11 12 14 15 16 gt tte RETURN CLEAR 4 To programme other tracks repeat step 3 The programmed track numbers are displayed in the selected order Press C gt to start programme play o Programme play starts When the programme ends you can restart the same programme again by pressing D gt To stop programme play
82. power while rewinding Rewind Shut Off Press 1 C while the tape is rewinding The power will turn off but the tape will keep rewinding until it reaches the end To play search at various speeds Playback options View the picture during fast forward or rewind Operation During fast forward hold down gt During rewind hold down lt 4 Play at high speed e During playback briefly press P gt or lt lt The tape continues to play at 5 times normal speed During playback hold down or lt lt The tape continues to play at 5 times normal speed When you release the button normal playback resumes Play in slow motion During pause press gt SLOW I gt Play frame by frame During pause press II STEP Play at various speeds Shuttle play During playback press K lt 4 or PPI You can change the playback speed as follows REVIEW gt x2 gt x 1 gt SLOW lt gt STILL lt gt SLOW lt gt PLAY lt gt x2 gt CUE 1 REW flashes in the display window 2 FR flashes in the display window Playing a tape To resume normal playback Press gt To set the colour system If the playback picture has no colour or streaks appear during playback set Colour System in the USER SET menu to conform to the system that the tape was recorded in see page 103 Normally set the option to Auto To use the time counter
83. pressed to about 1 40 average of its original size The DVD also uses a variable rate coding technology that changes the data to be allocated according to the status of the picture Audio information is recorded in a multi channel format such as Dolby Digital allowing you to enjoy a more real audio presence Furthermore various advanced functions such as the multi angle multilingual and Parental Control functions are provided with the DVD DVD RW page 6 A DVD RW is a recordable and rewritable disc that is the same size as a DVD VIDEO The DVD RW has two different modes VR mode and Video mode DVD RWs created in Video mode have the same format as a DVD VIDEO while discs created in VR Video Recording mode allow the contents to be programmed or edited DVD RW page 6 A DVD RW plus RW is a recordable and rewritable disc DVD RWs use a recording format that is comparable to the DVD VIDEO format Title page 37 The longest section of a picture or music feature on a DVD movie etc in video software or the entire album in audio software Track page 37 Sections of a picture or a music feature on a CD or VIDEO CD the length of a song Glossary UOHEWIOJU EUOHPPY i 111 112 Specifications System Laser Semiconductor laser Signal format system PAL NTSC MESECAM Channel coverage PAL B G D K VHF E2 to E12 R1 R12 UHF E21 to E69 R21 R69 CATV S01 to S05 S1 to S41 RF output signal UHF c
84. r System Set this option to e Auto to set the colour system automatically e PAL to play back a tape recorded in the PAL colour system e MESECAM to play back a tape recorded in the MESECAM colour system When using the tape recorded NTSC colour signals e NTPB to play back an NTSC recorded tape on PAL TV e NT4 43 to play back an NTSC recorded tape on Multi TV If you press amp or turn the DVD VCR off Colour System will be reset to Auto NICAM On to record NICAM broadcasts on the hi fi audio track Off to record standard sound on the hi fi audio track For details see page 91 Smart Trilogic On to automatically adjust the sharpness of the picture Off to manually adjust the sharpness of the picture General setup information Troubleshooting If you have any questions or problems not covered below please consult your nearest Sony service facility General Troubleshooting Symptom Remedy The I O on standby switch does e Connect the mains lead to the mains securely 5 not function The power is turned on but the DVD e Moisture condensation has occurred Turn the power off p p Q VCR does not operate unplug the mains lead and leave the DVD VCR to dry for over three hours The clock has stopped and The clock stops if the DVD VCR is disconnected from appears in the
85. receive channel information for station names to appear automatically Note e When adjusting MFT the menu may become difficult to read due to interference from the picture being received Changing disabling programme positions After setting the channels you can change the programme positions as you like If any programme positions are unused or contain unwanted channels you can disable them You can also change the station names If the station names are not displayed you can enter them manually Changing programme positions Before you start Turn on the DVD VCR and your TV To control the DVD VCR set TV DVD VIDEO to DVD VIDEO on the remote page 9 e Set your TV to the video channel so that the signal from the player appears on the TV screen SET UP e If the DVD player is in play mode you cannot display the setup menu Stop the DVD playback t 4 4 gt ENTER 2 gt RETURN 24 Presetting channels Press SET UP then press to select OPTION then press ENTER OPTION Language English Clock s Install User Set Auto Power Off Off Screen Messages On ENTER RETURN SET UP paes buiye5 Press to select Install then press ENTER Auto Setup Manual Setup The INSTALL menu appears TV System K Video Output CH CH32 RETURN SI Press
86. rol is set 1 Insert the disc then press D gt The display for entering your password appears Enter your 4 digit password using the number buttons The player starts playback If you forget your password 1 Remove the disc and turn off the DVD VCR 2 Turn on the DVD VCR again with no disc in the unit 3 Hold down lt 4 and gt gt on the front panel simultaneously for 5 seconds Reset OK appears on the screen 4 Turn off the DVD VCR The password is cleared 5 To create a new password follow step 3 on page 64 Notes e When you play DVDs which do not have the Parental Control function playback cannot be limited on this player e All the ratings higher than the level you select will be blocked e Write your password down and keep it in a safe place in case you forget it Parental Control limiting playback by children sjuswysnipy pue sumas GAG i 65 DVD Additional Operations a Using the DVD s menu A DVD is divided into long sections of a picture or a music feature called titles When you play a DVD which contains several titles you can select the title you want using the TOP MENU button Number buttons When you play DVDs that allow you to select items such as the language for the subtitles and the language for the sound select these items using the MENU button t 4 4 gt ENTER MENU TOP MENU Press TOP MENU or MENU O The disc s menu appears on the TV scree
87. skip to the next track You cannot change the MP3 or the Multi Session CD playback speed VIDEO CD fast foward reverse cannot be paused During CD fast forward reverse play no sound is output Notes on playing DTS sound tracks on a CD e When playing DTS encoded CDs excessive noise will be heard from the analog stereo jacks To avoid possible damage to the audio system the consumer should take proper precautions when the analog stereo jacks of the DVD player are connected to an amplification system To enjoy DTS Digital Surround playback an external 5 1 channel decoder system must be connected to the digital jack of the DVD player Set the sound to STEREO using the AUDIO button when you play DTS sound tracks on a CD page 75 Do not play DTS sound tracks without first connecting the DVD player to an audio component having a built in DTS decoder The DVD player outputs the DTS signal via the DIGITAL AUDIO OUT COAXIAL or OPTICAL jack even if DTS is set to Off in AUDIO SETUP menu page 56 and may affect your ears or cause your speakers to be damaged continued Playing discs suoeiado o1seg H 35 36 Notes on playing DVDs with a DTS sound track Playing discs DTS audio signals are output only through the DIGITAL AUDIO OUT COAXIAL or OPTICAL jack When you play a DVD with DTS sound tracks set DTS to On in AUDIO SETUP menu page 56 If you connect the player to aud
88. ss 25 Q 1I 2 F To display other pages for programme DECODER a positions 6 to 80 press repeatedly NAME eras a Avar MEMORY ENTER RETURN Press repeatedly until the channel you want is displayed DECODER NAME Avar MEMORY ENTER CES Press to select NAME then press MANUAL TUNING DECODER NAME Avar MEMORY ENTER MANUAL TUNING ES Enter the station name 1 Press to select a character Each time you press the character DECODER changes as shown below NAME A B gt Z 0 gt 1 gt 9 Avar MEMORY ENTER RETURN gt A 2 Press to set the next character The next space flashes To correct a character press until the character you want to correct flashes then reset it You can set up to 4 characters for the station name CES Press ENTER to confirm the station name continued Presetting channels 23 9 Press 6 RETURN then press SET UP to exit the menu RETURN SET UP Q If the picture is not clear If the picture is not clear you may use the Manual Fine Tuning MFT function After step 5 press to select MFT Press to get a clear picture Then press ENTER Tips To set the programme position for the decoder see Setting the PAY TV Canal Plus decoder on page 30 The DVD VCR must
89. te on the DVD VCR to use the timer features properly The Auto Clock Set function works only if a station in your area is broadcasting a time signal SLV D910N only Before you start Turn on the DVD VCR and your TV To control the DVD VCR set TV DVD VIDEO to DVD VIDEO on the remote page 9 e Set your TV to the video channel so that the signal from the player appears on the TV screen If the DVD player is in play mode you cannot display the setup menu Stop the DVD playback SET UP t 4 4 gt ENTER Press SET UP then press to select 2 1 SET UP OPTION then press ENTER OPTION Language English Clogk y Install User Set Auto Power Off Off Screen Messages On ENTER RETURN SET UP Q Press to select Clock then press 9 ENTER m Gey ovo Quo mer The CLOCK SET menu appears SS CLOCK SET Time Date Year 12 00 1 JAN 2003 WED Autoclock On EAMA a SET UP RETURN Press to set the hour Y Gore gt lt gt U Qro O mer CLOCK SET Time Date Year 18 00 1 JAN 2003 WED Autoclock On EAMA a RETURN SET UP Setting the clock Press to select the minutes and set the minutes by pressing CE Queo
90. the TV or monitor The picture has no sound e The tape is defective If you made A V connections check the audio cord connection The sound from a tape recorded with the VCR is not in stereo or the STEREO indicator in the display window is flashing e Adjust the tracking e The video heads are dirty Clean the video heads using a Sony video head cleaning cassette as explained above Recording No TV programme appears on the TV screen e Make sure the TV is set to the video channel If you are using a monitor set it to video input e Existing broadcasts may interfere with the VCR Reset the RF channel output of your VCR page 16 e Select the correct source with the INPUT SELECT button Select a programme position when recording TV programmes select a line input when recording from other equipment TV reception is poor e Make sure the aerial cable is connected securely e Adjust the TV aerial e Make sure the TV system is correctly set for your TV e Make sure TV System B G or D K in the INSTALL menu is set to the same system in your local area The tape starts playing as soon as it is inserted e The safety tab has been removed To record on this tape cover the tab hole The tape is ejected when you press REC The safety tab has been removed To record on this tape cover the tab hole Nothing happens when you press REC e Make sure the tape
91. tion It is designed to be operated in a horizontal position only Keep the unit and discs away from equipment with strong magnets such as microwave ovens or large loudspeakers Do not place heavy objects on the unit e Do not place the unit on surfaces rugs blankets etc or near materials curtains draperies that may block the ventilation slots Compatible colour systems This VCR is designed to record using the PAL B G or D K or MESECAM B G or D K colour system and play back using the PAL B G or D K or MESECAM B G or D K and NTSC 4 43 colour systems Recording of video sources based on other colour systems cannot be guaranteed Welcome Thank you for purchasing this Sony DVD Player Video Cassette Recorder Before operating this player please read this manual thoroughly and retain it for future reference Caution For use of the VCR Television programmes films video tapes and other materials may be copyrighted Unauthorized recording of such material may be contrary to the provisions of the copyright laws Also use of this recorder with cable television transmission may require authorization from the cable television transmitter and or programme owner For use of the DVD player This product incorporates copyright protection technology that is protected by method claims of certain U S patents other intellectual property rights owned by Macrovision Corporation
92. ttons 10 19 ten s digit button 10 20 MUTING button 10 21 SP Standard Play LP Long Play button 43 22 TV VIDEO button 44 23 SQPB button 88 24 INPUT SELECT button 43 25 lt 4 rewind fast forward buttons SLOW B gt button 40 26 kea P PI SHUTTLE buttons 40 27 E stop button 40 28 RETURN button 24 Number 5 AUDIO C gt and PROG TRACKING buttons have a tactile dot Use the tactile dot as a reference when operating the DVD VCR DVD Audio Subtitle Language Abbreviation Language ARA Arabic CHI Chinese CRO Croatian CZK Czech DAN Danish DEU German ENG English ESP Spanish FIN Finish FRA French GRE Greek HUN Hungarian IDN Indonesian IND Hindi ISL Icelandic ITA Italian IWR Hebrew JPN Japanese KOR Korean MAL Malay NLD Dutch NOR Norwegian POL Polish POR Portuguese RUS Russian SVE Swedish THA Thai TUR Turquish VIE Vietnamese ZAF Afrikaans DVD Audio Subtitle Language UOHEWIOJU EUOHPPY i 119 Index Numerics 16 9 59 4 3 Letter Box 59 4 3 Pan Scan 59 A Adjusting picture 96 tracking 96 Aerial hookup 11 Angle 69 Audio track 93 Auto Clock Set 14 Auto Set Up 14 C Canal Plus 30 Changing the programme position 24 Changing the station name 28 Clock setting 20 Colour system setting 41 C
93. ures of this product manufactured under a license from Desper Products Inc Spatializer VBX and the circle in square device are trademarks owned by Desper Products Inc Virtual surround setting suonesedo jeuonppy GAC i 77 Playing an MP3 audio track You can play back DATA CDs CD ROMs CD Rs CD RWs recorded in MP3 MPEGI Audio Layer 3 format a kaa PPI ce a 4 4 ENTER d gt RETURN 1 Press amp and place a DATA CD on the disc tray S then press amp to close the tray Select a Media Type When you load a DATA CD which contains HOMESE MP3 audio tracks and JPEG image files Select a Media Type menu appears If you load a DATA CD which contains only MP3 audio files the MP3 display appears Then you can skip step 2 2 CES Press to select MP3 then press Total 12 ENTER 1 tracki 5 2 track2 J tracki 3 track3 4 track4 lt gt 5 track5 RETURN SET UP 78 Playing an MP3 audio track Press then press ENTER or press k PPI to select the desired When a track or album is being played its title is shaded The playing track number appears on the display window 4 3 C track RO The selected track starts playing To change the album press 0 RETURN RETURN MP3 qa J albumi Strack1 J album2 J album3 RETURN SET UP
94. use the or number buttons If the indicator appears this means that the VCR is currently recording this programme You can also do the following tasks while the VCR is recording Reset the counter page 41 Display tape information on the TV screen page 43 suoleiado oiseg H Recording TV programmes using the timer 49 Checking changing cancelling timer settings Before you start e Check that the DVD VCR clock is set to the correct time Turn on the DVD VCR and your TV e Switch the input selector on your TV so that the signal from the player appears on the TV screen e Set TV DVD VIDEO to DVD VIDEO then press SELECT VIDEO to control the VCR page 9 e When using a decoder turn it on CLEAR SET UP Insert a tape with its safety tab in place Make sure the tape is longer than the total recording time If the DVD player is in play mode you cannot display the setup menu Stop the DVD playback t 4 4 gt ENTER 1 SET UP Press SET UP then press to select E O N QO TIMER then press ENTER 35 MO30 20 00 21 00 7 20 WE 2 22 00 23 30 The timer programming menu appears ee Si GES If you want to change a setting go on to the oe eae cy T If you do not need to change the settings press SET UP to exit the menu 50 Checking changing cancelling timer settings gt lt gt item you want to chan

Download Pdf Manuals

Related Search

Related Contents

TZT-701 User Manual - Edn 1-2  Alter Ego X4 Vintage Echo  Denon AVR-1312 Home Theater System User Manual  CAMÉRAS thERMOGRAPhiqUES  Zanussi ZF67/44 Use & Care Manual  TRIAD2 (Notice d"installation)  BOTONES  ABS Air Bag Lift Installation, Operation and Service Manual  

Copyright © All rights reserved. Failed to retrieve file