Soleus Air FS2-40R-32 User's Manual
Contents
1. SOLEUSA gt 16 Stand Fan with Remote Control Model No FS2 40R 32 Operating Instructions 9l C Yusto US 3072986 FS2 40R 32 2006 Soleus Air International Thank you for choosing a Soleus Air 16 Stand Fan This owner s manual will provide you with valuable information necessary for the proper care and maintenance of your new product Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new fan For your own records please attach a copy of your sales receipt to this manual Also write the store name location date purchased and serial number below Store Name Location Date Purchased Serial Number located on back of unit ES IMPORTANT INSTRUCTIONS 1 When using this electric unit basic safety precautions should always be followed to reduce the risk of fire electric shock and injury to persons including the following Read ALL instructions before using this unit Use only for intended household use as described in this manual Plug the fan directly into a 120 V A C electrical outlet Never insert your fingers pencils or other objects through the fan grill during operation The fan should be used on a stable and level surface Do not expose the fan to excessive heat or humidity This could cause damage to the electrical compo nents 8 Do not immerse in any type of liquid Do not use near water 9 The fan2. is gt gt positioning the top tab of the front grill over the back grill Firmly press the black ring of the front grill onto the back grill snapping into place This completes the assembly PA AANA S 4 a cr f Pae FEE rs at x ERE TERS a ZAA EEE EE OPERATING INSTRUCTIONS Using Fan Controls 1 2 3 4 Set the fan on a stable level surface Turn the fan on by pressing the POWER SPEED button on the Control Panel or Remote Control Adjust the speed setting by pressing the POWER SPEED on the Control Panel or remote control Pressing the MODE button on either the fan or the remote will choose the desired wind mode Standard Sleep amp Natural In standard mode the fan operates at a steady speed In Sleep mode the fan decreases speed in the middle of the oscillation pattern Natural mode simulates the wind by randomly alternating the fan speed To oscillate the fan head press the OSCILLATION button located on the fan or the SWING button on the remote Each press of the oscillation button will change the oscillation pattern You can choose between side to side up and down and figure 8 oscillation patterns This fan includes a 12 hour auto shut off timer To operate the timer press the TIMER button located on the fan or on the remote until the desired time is visible on the LCD Display Each button press will increase the time by 1 hour increments Once the timer is set the y
3. Voltage Rating 115V 60Hz Unit Size 17 5 in W x 17 in D x 53 in H Unit Weight 14 Ibs ASSEMBLY WARNING DO NOT plug in fan before assembly Tools required Phillips screwdriver not included Base Assembly 1 Unscrew the two screws from the neck of the fan head Slide the neck of the fan head over the pole of the stand aligning the screw holes Secure the pole by inserting and tightening the two screws 2 Turn the stand upside down and place the base over the bottom of the stand Align the pre drilled holes on the bottom of the base with the stand Use the 4 included screws to secure the stand to the base Fan Head Assembly Unscrew the mounting nut counter clockwise from the motor shaft Position the back grill over the motor shaft fitting the holes in the back grill over the knobs that protrude from the front of the mo tor Make sure the rear grill fits securely against the motor housing Secure the back grill by screwing on the mounting nut Turn clockwise and tighten firmly ahs Slide the fan blade onto the motor shaft with the fan blade s shaft sleeve facing the motor Make sure the groove in the shaft sleeve fits over the spring bolt on the motor shaft Attach the fan blade by screwing the securing knob onto the motor shaft counter clockwise RIS re e age E T Position front grill so logo is horizontal Attach the grills together by saat ae AN yt y Bh ence a
4. should be kept out of the reach of children Close supervision is necessary when the fan is used by or near children 10 To reduce the risk of fire or explosion do not store or use gasoline or other flammable vapors or liquids in the vicinity of the fan 11 Do not operate this or any appliance with a damaged cord if the unit malfunctions or if it has been dropped or damaged in any manner Connect to properly polarized outlets only 12 Do not cover the cord or place near heat sources Keep the cord away from high traffic areas and do not submerge in water 13 Unplug the fan before moving cleaning or making repairs NOTE If for any reason this unit requires ser vice return appliance to manufacturer or a similarly qualified service agent to ensure safety 14 To reduce the risk of fire or electric shock do not use this fan with any solid state speed control device 15 To disconnect grip plug and pull from wall outlet Never pull on the cord to unplug 16 For indoor use only Ba OO ae aa WARNING This fan is equipped with a polarized plug one blade is wider than the other The plug is in tended to fit into a power outlet only one way with the wide blade in the wide slot This is a safety feature if you are unable to insert the plug fully into the outlet try reversing the plug If the plug still does not fit contact a qualified electrician DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED PLUG TECHNICAL SPECIFICATIONS
5. hing the top of the Fan Grill The fan will make a clicking noise while being adjusted Once the Fan Head is set to the desired tilt tighten the knob to secure into place CLEANING amp MAINTENANCE 1 Turn the fan off and unplug the unit 2 Wipe the fan down with a damp cloth for most efficient operation 3 Air dry the fan completely before use 4 Never use abrasive cleaning agents or solvents This may cause damage or deterioration to the surface of the unit 5 Do not immerse the fan in any form of liquid Do not allow water to drip on or into the fan motor housing Fan Blade Cleaning e Make certain the fan is unplugged Unlock the metal clips on the front grill and remove the front grill Use a Phillips screwdriver to loosen the securing screw and remove the fan blade e The fan blade and grill may be cleaned with a damp cloth and mild detergent e Reassemble the fan after the parts have dried completely To do so replace the fan blade tighten the securing screw and secure the front grill Do not plug the fan into an electrical outlet until it is fully reassembled D STORAGE If the fan will not be used for a long period of time store it in a cool dry location when not in use To prevent dust and dirt build up use the original packaging to repack the unit OVERHEAT PROTECTION A thermostat is built in to the motor to prevent overheating If the fan temperature exceeds the limit on the thermostat the fan will aut
6. omatically shut off to prevent overheating and protect the fan components from damage REMOTE CONTROL The supplied remote uses 2 AAA batteries The remote will work at a distance of roughly 25 feet and an angle of 60 a WARRANTY One Year Limited Warranty Soleus International Inc warrants the accompanying Soleus Air FS2 40R 32 16 Stand Fan to be free of defects in ma terial and workmanship for the applications specified in its operation instruction for a period of ONE 1 year from the date of original retail purchase in the United States If the unit exhibits a defect in normal use Soleus International Inc will at its option either repair or replace it free of charge within a reasonable time after the unit is returned during the warranty period As a condition to any warranty service obligation the consumer must present this Warranty Certificate along with a copy of the original purchase invoice THIS WARRANTY DOES NOT COVER e Damage accidental or otherwise to the unit while in the possession of a consumer not caused by a defect in material or workmanship e Damage caused by consumer misuse tampering or failure to follow the care and special handling provisions in the instructions This includes dents accidental or otherwise to the base and head of the unit e Damage to the finish of the case or other appearance parts caused by wear e Damage caused by repairs or alterations of the unit by anyone other than th
7. ose authorized by Soleus International Inc e Freight and Insurance cost for the warranty service ALL WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANT ABILITY ARE LIMITED TO ONE YEAR DURATION OF THIS EXPRESS LIMITED WARRANTY SOLEUS INTERNATIONAL INC DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES AND IN NO EVENT SHALL SOLEUS INTERNATIONAL INC S LIABILITY EXCEED THE RETAIL VALUE OF THE UNIT FOR BREACH OF ANY WRITTEN OR IMPLIED WARRANTY WITH RESPECT TO THIS UNIT This warranty covers only new products purchased from our authorized dealers or retailers It does not cover used sal vaged or refurbished products As some states do not allow the limitation or exclusion of incidental or consequential damages or do not allow limitation on implied warranties the above limitations and exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights that vary from state to state For Technical Support amp Warranty Service Please Call 888 876 5387 Or Write To Soleus International Inc 9451 Telstar Ave El Monte CA 91731 USA www soleusair com
8. ou will see HR and a clock icon light up on the display Once set the timer will count down to zero and turn off the fan To turn the fan off press the POWER SPEED button on the Control Panel or remote control until the unit turns off Using the Auto on Feature l First turn the fan on by pressing the POWER SPEED button on the Control Panel or Remote Control You will see the current room temperature flashing on and off on the LCD display Once the fan is on press the AUTO button located on the remote control or the control panel AUTO should now be displayed on the LCD display and the current room temperature will stop flashing on the display When the fan is in auto mode it will vary speeds according to the room temperature When the room temperature is below 68 the fan will be in standby mode off When the temperature is between 68 F and 74 F the fan will operate at low speed 1 When the temperature is between 75 F and 81 F the speed will increase to medium 2 The fan will operate at high speed 3 once the room temperature is equal to or greater than 82 F Adjusting Height and Fan Head Tilt l To adjust the height of the fan turn the Adjustable Height Knob L counter clockwise to loosen the stand Adjust the fan to the desired height then firmly tighten to secure into place To adjust the tilt on the Fan Head loosen the knob below the Motor Housing and tilt the fan forward back by pulling or pus
Download Pdf Manuals
Related Search