Snapper 1692210 User's Manual
Contents
1. INSTALLATION INSTRUCTIONS A WARNING Turn off the engine let the rotor come to a complete stop and disconnect the spark plug wire before assembling the vacuum kit or changing attachments A WARNING Never remove adapter from the back of the machine while the machine is running or the rotor is turning The rotor is pinning just inch es away from the adapter iniet Serious injury will result if you put your fingers or foot in the adapter inlet while the rotor is turning INSTALLATION 1 Remove the rotor housing cover Retain the screws 2 Replace the cover with the adapter 1A or 1 B using the screws removed in step 1 and washers 15 3 Twist the coupler 2 onto the end of the hose 4 Insert the coupler into the adapter by aligning the Ref Qty Part No Description 1A 1021100 Adapter 1B 1713522 Adapter European Model 2 1023100 Coupler 3 1025100 Plug 4 1035100 Hose 10 x 4 Dia 5 1027100 Leaf Tray 6 1030100 Nozzle 7 1024100 Ring 8 1960294 Nut Hex Flange 1 4 20 9 1921319 Washer 1 4 lO 6041612 Screw Phillups Hd 1 4 20 x 1 1 2 11 1026100 Handle 12 1 1028100 Grip Handle 13 5001612 Decal Danger 14 1709404 Hopper Lid Orange 1019100 Hopper Lid Gold 1709467 Hopper Lid Red 15 3 1919326 Washer Flat e Lid color depends on which kit you ve ordered Only one lid is packaged per kit Figure 1 Kit Parts CHIPPER SHREDDER VACUUM KIT Mfg Nos 1692210 1692231 169232. dry leaves The nozzle and handle can be attached to the end of the hose for hard to reach places The strength of the vacuum can be adjusted by turning the sleeve on the nozzle end Open the sleeve fully for minimum suction power to vacuum leaves over a garden area VACUUMING TIPS e Keep the hose straight for best performance e Rake leaves into the tray at a steady rate so that the engine or motor runs at an even level For best results do not cram the tray full of leaves e Avoid items such as twigs that can get caught in the hose If material is wet allow to dry before vacuuming REMOVING THE VACUUM KIT 1 When not using the vacuum kit turn off the engine let the motor come to a complete stop and discon nect the spark plug wire 2 Rotate the coupler hose assembly until the seams line up on top pull until it clicks then unscrew and remove 3 Insert the plastic plug 3 into the adapter and twist until it seats completely FORM 1709566
3. 53 9000100 A WARNING Never operate the machine without tthe cwu pler hose assembly or plug connected to the adapter arrows or seams running along the top of the cou pler with those on the adapter Push fully in and turn until it snaps into place NOTE Insert plug 3 into adapter when vacuum attachment is not in use See Removing the Vacuum Kit on the next page 4 Slip the grip 12 onto the handle 11 Putting some soap on the handle will make the grip slide on easi er 5 Connect the handle to the nozzle 6 using the screw 10 washers 9 and nut 8 6 Connect nozzle 6 or leaf tray 5 to the hose 7 Securely place hopper lid 14 on hopper 2480 Phd Rotor 14 Adjust vacuum strength by tuming ring and adjusting opening size FORM 1709566 PRINTED IN U S A 12 93 SMl USING THE VACUUM The vacuum kit lets you take full advantage of the vacuum created by the four fan blades on the rotor fly wheel Placing the lid on the hopper directs the suc tion power to the hose inlet at the bottom of the hous ing Use the vacuum kit to conveniently rake dry leaves and grass clippings into the leaf tray where the mater ial is sucked through the vacuum hose shredded in the shredding chamber and expelled out the dis charge chute The hopper lid must be in place for the vacuum to work properly The clear vacuum hose allows you to monitor the flow of material The vacu um kit works best on
Download Pdf Manuals
Related Search