Shure Microphone A98KCS User's Manual
Contents
1. SHURE Model A98KCS User Guide Horn Mount for SM98 or WM98 Microphone GENERAL The Model A98KCS Horn Mount is a versatile device that securely attaches Shure SM98 or WM98 microphones to a horn wind or reed instrument in the exact position desired while protecting the instrument and its finish The cushioned grip is manually tightened and securely clamps the rim of the horn Non marking neoprene rubber on the grip prevents marring the bell or its rim A short gooseneck 165 mm 6 1 2 in attached to the clamp ter minates in a shock mount adapter for the SM98 or WM98 micro phone The gooseneck length can be adjusted to facilitate locating the microphone in precisely the desired position in the bell of a horn A side screw locks the gooseneck in the chosen position MOUNTING 1 Attach the cushioned grip to the desired location on the bell of the instrument and tighten the knurled top thumbscrew to hold the clamp in place See Figure 1 KNURLED ATTACH CLAMP TO HORN FIGURE 1 2 Loosen the knurled side screw on the A98KCS and adjust the length of the gooseneck intheclamp Tightenthescrew SeeFigure 2 SIDE SCREW USE SIDE SCREW TO ADJUST LENGTH OF GOOSENECK FIGURE 2 NOTE A supplied optional 1 16 inch setscrew and hex wrench can be used to replace the side screw when repeated adjustments of the gooseneck length are not required 2005 Shure Incorporated 27B2580 Rev 5 3 Insert the SM98 or WM98 microphone in2. the shock mount holder by slipping the cable through the slot and sliding the connector back through the opening until the protruding black cable lock button is in the open slot and the back of the micro phone itself stops flush with the front of the holder Only the sil ver metal segment of the connector is held by the holder See Figure 3 BLACK PLASTIC PROTRUDING BUTTON MICROPHONE INSERT SM98 IN HOLDER FIGURE 3 4 Slip the cable through the slot in the cable guide see Figure 4 and route the cable away from the horn to prevent transmission of noise and vibration through the cable SMALL LOOP yer RETAIN CABLE IN GUIDE FIGURE 4 5 Select the desired location of the microphone by bending the gooseneck as required If necessary re adjust the gooseneck length as described in step 2 6 To prevent wind noise use the windscreen supplied with the microphone SHURE SHURE Incorporated http www shure com United States Canada Latin America Caribbean 5800 W Touhy Avenue Niles IL 60714 4608 U S A Phone 847 600 2000 U S Fax 847 600 1212 Intl Fax 847 600 6446 Europe Middle East Africa Shure Europe GmbH Phone 49 7131 72140 Fax 49 7131 721414 Asia Pacific Shure Asia Limited Phone 852 2893 4290 Fax 852 2893 4055 Printed in U S A
Download Pdf Manuals
Related Search