Shure i2c-t User's Manual
Contents
1. Those who use earphones regularly for extended periods of time often find custom fit molded sleeves offer the best comfort and sound isolation Ask a Hearing Health Care Professional about creating custom molded sleeves for your earphones For more information contact g Sensaphonics Hearing Conservation Toll Free 877 848 1714 660 N Milwaukee Avenue In Chicago 312 432 1714 ph Chicago IL 60622 e mail saveyourears sensaphonics com www sensaphonics com Careful maintenance ensures a tight seal between the sleeve and nozzle improving sound quality and product safety Keep the earphones and sleeves as clean and dry as possible Wipe the earphones and sleeves with mild antiseptic to it Do not expose earphones to extreme temperatures avoid infections Do not use alcohol based disinfectants CERTIFICATION Eligible to bear CE marking Conforms to European EMC Directive 89 336 EEC Meets applicable tests and performance criteria in European Standard EN 55103 1996 Parts 1 and 2 for residential E1 and light industrial E2 environments ce Shure Incorporated Shure hereby warrants that this product will be free from defects in materials and workmanship for a period of two years from the date of purchase At its option Shure will repair or replace the defective product and promptly return it to you or refund the purchase price You should retain proof of purchase to validate the purchase date and return2. Warning If a sleeve becomes lodged in your ear seek skilled REPLACEMENT PARTS Sensitivity at 1kHz 105 dB SPL mWw medical assistance to remove the sleeve Damage to the ear Impedance at 1kHz 162 may be caused by non professionals attempting to remove the Bag of 10 foam sleeves small en PA752S sleeve medium PA752M Output connector 2 5mm 4pin jack for use with the lalGC 2222c42cae000 PA752L TREO650 smartphone A Prior to inserting the earphone always recheck the sleeve to Bag of 100 foam sleeves small PA753S make sure it is firmly attached to the nozzle medium PA753M AJE cc risers cece cen PA753L qe Turn up the volume control only far enough to hear properly Bag of 10 flex sleeves small PA757S es a i MCCUM sisi cceraas PA757M Ringing in the ears may indicate that the volume level is too high large 0 0 eee eee PA757L Try lowering the volume Bag of 10 replacement wax guards PA759 If you connect these earphones to an airplane s sound system listen at low levels so that loud messages from the pilot do not cause discomfort 4 Have your ears checked by an audiologist on a regular basis If you experience wax buildup discontinue use until an audiologist has examined your ears yD Stop using the earphones if they are causing great discomfort or infection amp CUSTOM EARPHONE SLEEVES MAINTENANCE FULL TWO YEAR WARRANTY
3. I2c T Sound Isolating Earphones These sound isolating earphones with VoicePort inline microphone connect to your integrated media player cell phone They feature Dynamic MicroDriver technology that you can now enjoy at low listening levels even in noisy environments 2005 Shure Incorporated 27EN8209 Rev 2 Printed in U S A CHOOSING AN EARPHONE SLEEVE WEARING THE EARPHONES INSERTING THE EARPHONES Wear the earphones as illustrated below Over the ear in front WAX GUARD If the earphone seems to be lacking in low frequency response bass check the tightness of the seal between the earphone and your ear or try one of the other sleeve options Warning Do not push the earphone sleeve beyond the ear canal opening WT left ear bb Make sure that the sleeve completely covers the earphone stem If any part of the nozzle is exposed the sleeve is not properly installed INLINE SWITCH CONTROL Your earphones come with a selection of sleeves Make sure the sleeve you use is easy to insert into your ear fits comfortably and is easy to remove from your ear Flex Sleeves In small medium and large sizes Made from translucent PVC Soft Flex Sleeves In small medium and large sizes Made from pliable rubber Foam Sleeves When using the foam sleeves compress the sleeve between your fingers before inserting it into the ear canal Hold the earphone in place for a
4. bout ten seconds while the foam expands and creates a tight seal You should place wax guards on the nozzle of your I2c T earphones before using them These protective rings are found on an adhesive strip in the fit kit that comes with your earphones To place a wax guard on one of your I2c T earphones 1 Remove the sleeve from the earphone nozzle 2 If there is a dirty wax guard on the earphone peel it off 3 Clean the tip of the l2c T nozzle with an antiseptic or alcohol wipe 4 Make sure that the tip of the nozzle is dry then remove a wax guard from the supplied strip and place it on the tip of the nozzle adhesive side down 5 Replace the sleeve on the earphone Wax Guard IMPORTANT Do not place wax guards on sleeves Wax guards are intended for use on the tip of the earphone nozzle only If wax guards are placed on sleeves they will not function properly and may fall off the sleeves into your ears Q Push and hold to MUTE cell phone microphone Audio source cell phone F media player Note Turn volume control to its lowest setting before switching be tween music and cell phone Switching to media during a call mutes cell phone SAFE USE FURNISHED ACCESSORIES TECHNICAL SPECIFICATIONS Use a slow twisting motion to remove the earphones Never pull Carrying POUCH cisini areas ascteentnca ded 95A2232 F O ontheeatphonecora Fit Kit w wax guards 0 0 0 0 cece eens 90XH1371 ansduceniype Bynamie
5. it with any warranty claim If you believe this product is defective within the warranty period carefully repack the unit insure it and return it postage prepaid to Shure Incorporated 5800 W Touhy Ave Niles IL 60714 4608 SHURE Incorporated http www shure com United States Canada Latin America Caribbean 5800 W Touhy Avenue Niles IL 60714 4608 U S A Phone 847 600 2000 U S Fax 847 600 1212 Int l Fax 847 600 6446 Europe Middle East Africa Shure Europe GmbH Phone 49 7131 72140 Fax 49 7131 721414 Asia Pacific Shure Asia Limited Phone 852 2893 4290 Fax 852 2893 4055
Download Pdf Manuals
Related Search