Home
Seiko 7X52 User's Manual
Contents
1. Cannot receive X To cancel the reception press Button A When the second hand 4 points to Y or N reception is completed The reception result is displayed for 5 seconds Then the hour and minute hands move and the time and date are adjusted Reception Wa N result display Successful Failed ag af Display p T E sl C Check that the reception is successful after the watch returns to the time display mode When the time is not correct even if Y is displayed the time zone may not correspond to the region where you are Check the time zone setting The sub dial displays the time in a 24 hour system Even when the time zone of the dial is changed the time of the sub dial is not changed The sub dial moves independently from the dial 1 Unlock the crown Unlock the crown Turn the crown counterclockwise downward to unscrew it Now the crown can be operated Unscrew Crown Crown locked unlocked N 8 How to set the sub dial O How to set the sub dial 2 Pull out the crown to 3 Press Button B or Button C the first click The watch enters the time setting mode of the sub dial to set the time Hands on the main dial keep moving Press once to advance 1 minute pressed for 2 seconds or longer the sub dial hour minute hands will start to move
2. 5 Time Zone Adjustment When the region or time zone where the watch is used is changed Precautions on time zone adjustment If the time zone is adjusted near a time zone boundary the time of the adjacent time zone may be displayed In some areas the boundaries observed by the watch may not exactly correlate to the actual time zone markers on the land This does not indicate a malfunction In this case set the time zone in the manual time zone setting mode When the time zone is adjusted while traveling on land avoid time zone boundaries to carry out time zone adjustment in the representative cities in the time zone whenever possible In addition when the watch is used near time zone boundaries make sure to check the time zone setting and manually set the time zone as necessary O How to adjust the time zone Continue to press Button B 6 sec 2 and then release it when the second hand moves to the 30 sec position xx Although the second hand moves to the O sec position 3 sec after pressing Button B continue to press it When the second hand has reached the 30 sec position reception is started The indicator hand points to 4 When the second hand 4 points to Y E reception is completed The reception result is displayed for 5 seconds Then the hour and minute hands move and the time and date are adjusted 3 Direct the watch face upward and wait Please note that it may
3. expose to light Receptic is allowed P 7 Charging z Indicator display status Solution Reception is F fuli allowed Reception is Level allowed but position keep in mind middle to charge the watch Indicator display Movement of second hand One second interval movement Charging status The watch is unable to receive GPS signals but has energy to operate Solutions Charge the watch at least until the indicator hand points to the level position so that the watch is able to receive GPS signals Two second interval movement Five second interval movement The watch is E unable to receive GPS signals low and does not have energy to operate The energy depletion forewarning function is activated Continue to charge the watch at least until the indicator hand points to the level position so that the watch is able to continuously operate and receive GPS signals The charging status is not displayed for the in flight mode gt Reset the in flight mode as long as possible Reset the in flight mode y When the indicator hand points to E charge the watch following the above 3 In flight mode X When boarding O In flight mode J J Set to the in flight mode y Set to the in flight mode x where the reception may influence operation of other electronics devices in an airplane etc
4. In the in flight mode x the GPS signal reception time zone adjustment manual time adjustment and automatic time adjustment does not work lt In flight mode gt gt The indicator hand points to X X When the in flight mode y is reset the indicator hand indicates the charging status 1 Press Button B and then release it The second hand indicates the reception result Y or N and the indicator hand points to the type of reception 1 or 4 Continue to press Button C 2 3 sec within approximately 5 sec after operation of The second hand stops at the 40 sec position and the indicator hand points to lt In flight mode gt state gt The indicator hand points In flight mode setting automatically ends after 5 sec The watch returns to the time display mode When the in flight mode gt is brought about the indicator hand points to X even after the watch has returned to the time display mode Manual time zone setting To set the watch to the local time of the destination in an airplane etc 3xWhen 5 seconds or longer have elapsed after operation of the watch automatically returns to the time display mode When the watch returned to the time display mode restart operation from O Reset the in flight mode y Carry out operation of to In when the indicator hand points to ON in the figure the in flight m
5. be difficult to receive GPS signals while you are in motion It takes a maximum of 2 min to complete reception xlt depends on the receiving conditions Reception result Y N display Successfull Failed lt Display during reception gt RES The second hand indicates ease ap a Move to the outdoors for ee oN a of receiving number of GPS Display Z ai under an open sky i Eea E e with good visibility where GPS signals can be easily received from which GPS signals xDuring movement of are received the date the buttons and crown cannot be operated XDaylight Saving Time DST is not automatically set Carry out the setting manually While the indicator hand points to E or X reception is not started even with operation for reception When the hand points to E charge the watch by expose to light When the hand points to X reset the in flight mode Even when the hand points to 4 units or more reception may not be allowed X To cancel the reception press Button A S 6 Set Daylight Saving Time DST O Daylight Saving Time DST Depending on the area Daylight Saving Time DST is individually set Daylight Saving Time means summer time which is a system to lengthen daylight time by advancing 1 hour when daylight time is long in summer Daylight saving time has been adopted in about 80 countries mainly in Europe
6. continuously and when it is pressed again they stop moving 4 Push the crown back in Operation has been completed Lock the crown Turn the crown clockwise upward while gently pressing it in toward the watch body until it stops While pressing the crown in 9 How to manually set the time O How to manually set the time When using the watch again under a condition in which the watch is able to receive GPS signals receive GPS signals to set the time When adjusting the time the date will be accordingly adjusted 1 Unlock the crown Unlock the crown Unscrew 2 Pull out the crown to the second click The second hand moves to the 13 second position and stops DAEN the crown to the second click Continue to press Button A 3 3 seconds and then release it when the hand moves to the O second position The second hand moves to stop at the O second position The watch enters the manual time setting mode Press for 3 seconds When the watch enters the manual time setting mode the reception result will be displayed as N since the reception results data will be lost 4ghress Button B or Button C to set the time When the button is kept pressed for 2 seconds or longer the hour minute hands will start to move continuously and when it is Dressed again they stop moving The hands will not move by turning th
7. indicator hand to the OFF position as shown in the figure at the right The hour and minute hands return by one hour 7 Manual time adjustment To set only the time O Manual time adjustment Sof The watch can be set to the precise current time of the currently set time zone The time zone is not changed te EO How to manually adjust the time Move to the outdoors under an open sky with good visibility where GPS signals can be easily received Continue to press Button B 3 sec 2 and then release it when the second hand moves to the O sec position When the second hand has reached the O sec position reception is started The indicator hand points to 1 x While the indicator hand points to E or X reception is not started even with operation for reception When the hand points to E charge the watch by expose to light When the hand points to X reset the in flight mode gt 3 Direct the watch face upward and wait It takes up to 1 min to complete reception X The reception time depends on the reception conditions lt Display during reception gt The second hand indicates ease of receiving number of GPS satellites from which GPS signals are received X To acquire only time information the number of sa for reception is one Display Number of acquired satellites ellites necessary State Easy to receive
8. take place In the event that the attempt to receive leap second data is unsuccessful indicated by position N not successful it is recommended you move to a place where a GPS signal can be easily received such as outdoors and complete the process of receiving time data and then leap second data through a GPS signal by pressing and holding button B for 3 seconds For details please read the Basic Manual P 18 About Leap Second The leap second is to compensate for deviations from the Universal Time UT which is astronomically determined and the International Atomic Time TAI 1 second may be added deleted once a year or every few years at the end of June or December SEIKO ASTRON
9. SEIKO 7X52 GPS SOLAR ASTRON Quick START MANUAL X For details please read the complete user guide 1 Features O This is a GPS solar watch This watch has the following features GPS is an abbreviation for Global Positioning System This watch can be set to the precise local time by just one button operation anywhere in the world This watch quickly adjusts the time by receiving GPS signals from GPS satellites This watch responds to a total of 39 time zones around the world This watch operates by solar charging Expose the dial to light to charge the watch Once fully charged the watch runs for approximately six months When the energy stored in the watch runs out completely it takes time to fully charge the watch so please keep in mind to charge the watch regularly Unlike navigation equipment this GPS solar watch is not designed to constantly receive GPS signals from GPS satellites without any operation This watch receives GPS signals only in the time zone adjustment mode automatic or manual time adjustment mode 2 Check the charging status The indicator hand position shows whether this watch is able or unable to receive GPS signals In addition for the low charging state the movement of the second hand shows the energy depletion state in further detail GPS radio signal reception requires a lot of energy Keep in mind to regularly charge the watch by
10. and North America The adoption and duration of daylight saving time vary depending on the country X Daylight Saving Time is subject to change owing to circumstances of the country or region E Turn ON Daylight Saving Time DST XON OFF of the DST is not automatically changed over even with operation of time zone adjustment manual time zone setting When ime DST is not adopted from a region where it is adopted turn off the DST setting Continue to press Button C traveling to a region where Daylight Saving When the hour and minute hands stop moving 3 the DST setting mode is automatically completed after approximately 5 sec The watch returns to the time display mode The indicator hand returns to display the charging status XThe time at which the watch returns to the time display mode varies depending on the EX position of the indicator hand a lt The watch returns to the ees time display mode even by pressing button A within 5 sec after the hour and minute hands stop moving 1 Press Button A 2 3 sec within 5 sec after operation of 4 The indicator hand moves to point to ON and the hour and minute hands advance by one hour The indicator hand moves to indicate the current DST setting lt When DST setting is OFF gt O Turn OFF Daylight Saving Time DST Carry out operation of to in the state where Daylight Saving Time DST setting is ON In operation of adjust the
11. e leap second data takes longer than the regular time adjustment Be sure to complete receiving the leap second data in an environment where a GPS signal can be received such as outdoors The process of receiving leap second data Although this movement is different from the normal time display it is not an indication that the watch is defective Button B The second hand begins moving counter clockwise and displays the countdown in minutes until leap second data is received This may require up to 18 minutes When the second hand has reached the 12 o clock position reception of the leap second data beging When reception is good the second hand moves to the 1 o clock position and the watch acquires the data within approximately one minute If the reception was successful the second hand points to the Y position indicating successful data transfer The indicator hand points to the right side of the 4 position When the second hand points to the one second position it is indicating that one minute is required before the watch begins receiving the leap second data At this time it is recommended that you remain in an environment where a GPS signal can be received such as outdoors Please refrain from button operation while the watch is in the data receiving mode The watch will repeatedly enter the leap second data receiving mode until the process is successfully completed During this time no time adjustment will
12. e crown The point in which the date changes is at 0 00 AM 12 00 PM Set the time taking into consideration AM or PM Push the crown back in 5 simultaneously with a time signal Operation has been completed The watch resumes its normal movement Lock the crown While pressing the crown in Screw X Even if GPS signals cannot be received the watch can be used with the same accuracy as a normal quartz watch at loss gain 15 seconds per month on average X If the watch receives GPS signals after manual time setting it displays the received time 1 0 How to manually set the date O How to manually set the date Precautions on the setting the date manually Please refrain from doing this operation except where GPS signals cannot be received because this watch can be set to the precise current time and calendar by automatically receiving GPS signals It may cause the preliminary position of this watch misaligned When the date is not auto matically changed under a condition in which the watch is unable to receive GPS signals when changing from months with O days or less to months with 31 days set the date manually The date can be set independently regardless of the time When using the watch again under a condition in which the watch is able to receive GPS signals receive GPS signals to set the time and date gt 5 How to adjust the time zone X When the date is not correct even when t
13. he watch has successfully received GPS signals the preliminary position of the date may be misaligned BASIC MANUAL Adjust the preliminary positions of the date indicator hand and hour minute hands P 55 56 1 Unlock the crown Unlock the crown Unscrew 2 Pull out the crown to 3 Press Button B or Button C the second click to set the date The second hand moves to the 13 second position and stops When the button is kept pressed for 2 seconds or longer the date will start to move continuously Press the button again to stop XWhen the watch enters the manual time setting mode the reception result will be displayed as N since the reception results data will be lost The date will not move by turning the crown During movement of the date the buttons cannot be operated 4 Push the crown back in Operation has been completed crown in X Lock the crown While pressing the Screw 1 1 Instructions for Receiving Leap Second Data on Seiko Astron GPS Solar Watch Thank you for purchasing a Seiko Astron Watch This watch enters the leap second data receiving mode after the first GPS signal is received on or after December Ist and June 1st It is conducted every six months whether the leap second data is put into effect or not This process occurs automatically so no special operation is required from the user The process of receiving th
14. ode X can be reset at the right 4 Manual time zone setting To set the watch to the local time of the destination in an airplane etc O Manual time zone setting In places where the time zone cannot be adjusted the time zone can be set manually X Refer to Set Daylight Saving Time DST to set Daylight Saving Time DST O How to manually set the time zone Continue to press Button C When the hour and 3 minute hands stop moving press Button A 2 Press Button B or Button C to adjust the second 1 3 sec and when the second hand to the time zone of the destination hand has stopped release it The second hand moves to display the currently set time zone When the button is pressed once the second hand moves to the next zone The second hand starts moving lt Display of the indicator hand gt Displays ON OFF setting of Daylight Saving Time DST xDuring movement of the date the buttons and crown cannot be operated If Daylight Saving Time DST is not correct change over ON OFF with reference to Set Daylight Saving Time DST after operation of XXIf the time for pressing is short the watch will enter operation for checking the time zone setting so make certain to press the button for 3 sec XIf the second hand is stopped for one minute or longer the watch will automatically return to the time display mode
Download Pdf Manuals
Related Search
Related Contents
Manuale Italiano rev01 USER REFERENCE MANUAL Dell OpenManage™ Printer Manager v2 M Autenticação - SIIUE: Sistema de Informação Integrado da MUXpro 700 User Manual FICHE DE DONNEES DE SECURITE Manuale Utente in italiano Quartet 7553 I6640 Eee Pad Manuale Utente Copyright © All rights reserved.
Failed to retrieve file