SEIKI SC191FS User's Manual
Contents
1. www seikidigita l c om SEIKI Flat Panel LCD Television SC191FS Important Safety Instructions e Read these instructions All the safety and operating instructions should be read before this product is operated Keep these instructions The safety and operating instructions should be retained for future reference e Heed all warnings All warnings on the appliance and in the operating instructions should be adhered to e Follow all instructions All operating and use instructions should be followed e Do not use this apparatus near water The appliance should not be used near water or moisture for example in a wet basement or near a swimming pool and the like e Clean only with dry cloth e Do not block any ventilation openings Install in accordance with the manufacture s instructions e Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat e Do not defeat the safety purpose of the polarized or grounding plug A polarized plug has two blades with one wider than the other A grounding plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet e Protect the power cord from being walked on or pinched particularly at the plugs convenience receptac2. Sleep button setting TV power off time SOURCE Signal source selection button TV AV Component HDMI1 HDMI2 VGA INFO Press info button to view the current channel Press again to remove channel information CH Channel selection button to increase or decrease channel VOL Volume adjusting button to increase or decrease the volume FREEZE Freeze picture for TV CH LIST Display program list ASPECT Select display mode Wide Wide Zoom Zoom Standard EPG Electronic Program Guide function A V Up Down Up and down button of OSD menu To change the OSD menu items lt gt Left Right Left and right button of the OSD menu To select the OSD menu items OK To confirm the choice with the highlighted menu item MENU OSD menu button to enter the TV setup menu EXIT Press the EXIT to exit operation CC Closed Caption select button ON OFF orCC ON Mute V CHIP Setting up parental contol FAV Display favorite of program list ADD ERASE Add or deleted Favorite channel 11 Operating Your Television Basic Operations Turning Your TV On and Off TURN ON LED TV 1 Connect to power with the main power cable at this time the TV will enter STANDBY mode and the LED will be red 2 From the STANDBY mode use the POWER button either on the main unit or on the remote to turn vour television on TURN OFF LED TV From ON mode use the POWER button either on the main unit or on the remote to turn your television to
3. 14 Choosing a TV Channel 0000 eee es 14 Selecting Input Source cc es 15 Picture Menu Options 000 cee eee 15 Audio Menu Options cc eee eee eee 16 Time Menu Options 244 nan AG eee eee ua kae ad ee ea 16 Setup Menu Options nunn nusanaa es 17 18 Lock Menu Options 54 van manna na vana enam mada ennast ea 19 Channel Menu Options 0 ununneaaaua eea aan anna a ann n na 20 21 Parental Menu ODptions 0 ccc naa naa aa aaa nn annan nan nn n nn 22 11040Dlesnoot da e nee eee ah ase ee ee eee eee saue muu 23 25 ECC 00 0 00 0000 00 05 es eee oe ee ee Bee NG 26 Specifications ox 60 beh aa eae ea ee ee ee AA 26 Caution The exclamation point within an eguilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons This product contains electrical or electronic materials The presence of these materials may if not disposed of properly have potential adverse effects on the environment and human health Presence of this label on the product means it should not be disposed of as unso
4. STANDBY mode SETUP WIZARD Welcome to the SEIKI HDTV Setup Wizard Use the Up and Down arrows on your Follow this guide to help setup your SAU EN OL PULS local ti 2 HDTV for Scanning Channels or select your local time zone Alaska accessing your external devices for Antenna Set top Box Blu ray DVD Games and other player French Mountain SEM ENT Use the Up and Down arrows on your Spanish Go Back Central remote control or TV keypad to select the language of screen menu and message Eastern RY Select Enter Next TERG Select Enter Next Home Mode optimizes the standard video settings for ENERGY STAR qualification Use the Up and Down arrows on your remote control A TT Poweron mode Click here to connect a Game Blu Ray DVD or other player Click here to scan channels from the Antenna or coaxial cable input Home Mode Energy Saving Go Back Retail Mode Go Back TORO Select Enter Next KO AV Select Enter Next Home Mode Energy Saving Select Home Mode to maximize energy efficiency Please note if you select Home Mode the picture will be darker This mode meets the requirements of Energy Star qualification Retail Mode Select Standard Mode if you would like your picture to be brighter At times this mode may use more energy to operate the Volume Sound Mode and the Picture Mode In this setting the power consumption may possibly exceed the limited re
5. Q 4 6 boo AC power input terminal SERVICE port HDMI1 HDM12 input VGA input Component input terminal AV input PC AUDIO input Antenna input 75 Ohm VHF UHF Headphone output O O NN 0 OR O N Wall Mounting The TV is provided with mounting holes for a VESA approved wall mounting bracket NOT SUPPLIED Remove the screws holding the base to the base bracket and lift the base away do not remove the base mounting brackets Mount the VESA bracket using 4 x M4x10 isometric threaded screws not supplied Do not use screws longer than 10 mm damage will occur to the internal parts Caution Your new TV is heavy please consult with a professional wallmount installer to perform this installation 8 Connecting to External Devices HDMI Ol Computer HDMI Cable not included VGA Cable Audio Cable not included DK not included EET CO yt or Earphones Cable rn not included RF cable E not included g HDMI2 HDMI1 r39 GES 6660 66 o PC VIDEO L R RF AUDIO COMPONENT AV IN 750 Go Component cable not included Blu Ray Player Recorder Sy E g 22 gt Video Camera Game Console Satellite Antenna cable me VCR Satellite Receiver Note Y Pb Pr and VIDEO share with audio in R L Remote Control Key Functions Power button Numeric buttons Channel setup button Picture mode button
6. Return A p 4 Setup Lock Channel Basic Selection 4 0103 Advanced Selection 4 Service Option TS Select MENT Return Operating Your Television Setup Menu Options OPTION Press 4 wand then use P to enter into the following menu Press 4 vand then use p to select Iha KA 153 LA BA Picture Audio Time Setup Lock Channel Custom gt Font 0 Normal None Black White Red Solid Solid Mode Font Style Font Size Font Edge Style Font Edge Color FG Color BG Color FG Opacity BG Opacity AAAA AAAA AAMT vyv AA AA vv yv RS Move SF Select MEND Return DLC Press A V and then use lt gt to turn dynamic luminance control On or Off Restore Default AN ie S Select Restore Default press OK and it will display Are you sure IL GB UE md Select Yes to select the factory default settings Are you sure No Yes RY Select WENT Return 18 Operating Your Television Lock Menu Options Press the MENU on the front panel or the MENU on the remote control and then use the 4 gt to select the LOCK menu press Y button or OK to enter it Use the V button to enter the Enter Password selection and use the numeric keys to input a 4 digit password The screen will display the sub menu After setting press the Menu button to exit NOTE The factory password is OOOO lt AYU Mm Setup Lock Channel Enter Password On Input RRT Setting Re
7. Sound mode button Signal source selection button Channel selection button CH LIST button FREEZE button UP button LEFT button TV setup menu button CC button V CHIP button SOURCE cHUST ASPEC EXIT v CC V CHIP FAV ADD ERASE SEIKI Mute button Return channel button SLEEP button MTS button Information button Volume adjust button ASPECT button EPG button ENTER button RIGHT button Down button Exit the OSD menu button ADD ERASE button FAV button If there is light around the TV the remote control may fail or work abnormally If not using the remote for a long period of time please remove the batteries Remote control function keys to practice prevail 10 Remote Control Key Functions POWER Power on off button press once to turn the TV on and press again to tum the TV off MUTE Mute button press once to disable the audio and press again to enable the audio 0 9 TV channel selection button Press this button to enter a program number for multiple program channel such as 2 1 etc Go Previous channel button return to the previous channel watched P MODE Setting the picture mode S MODE Setting the sound mode MTS Press to select the audio channels e Make sure the TV has searched the channel and that there is a Analog Stereo Dual Sound Signal shown on the program e Then press the MTS Multichannel Television Sound button to select STEREO MONO and SAP SLEEP
8. Your Television Show Hide Allows you to show or hide the channels Use the A YV button to highlight the Show Hide item TIN K i kud NG M ES i then press the P button to enter the menu Channel Channel Name Add Delete 50 2 KOCE SD NA Use the A YV button to highlight the desired item then a a Gi a press the OK button to show or hide the highlighted channel Channel No Display the number of current channel RY Move Press OK change MEND Return Channel Label Display the label of current channel DTV Signal Display the quality of current DTV signal 21 Parental Menu Options Parental Control Press Enter to enter the sub menu and then use the O 9 to enter the correct password 0 0 0 0 If used this option feature can block undesirable programming from appearing on the TV Parental Control offers the user a wide variety of options and settings that restrict or block the programming that can appear on the TV Parental Control allows the user the capability of defining which program rating they consider acceptable to the younger more sensitive viewer It can be preset and turned either on or off by the user who specifies the secret 4 number code the password The number of hours blocked are specified General audiences and children blocks should be both programmed into the TV s memory Viewer ratings are specified for both TV and the motion picture industry both rating systems should be used fo
9. ces by selecting Picture Mode in the PICTURE menu You may select the picture mode directly by pressing the P MODE button in the remote control Contrast sd EIN Press A V and then use 4 P to adjust the contrast of the picture aka BM Bali MARA Leck aa Brightness Picture Mode lt Energy Saving gt Contrast E 55 Press A V and then use 4 P to adjust the brightness of the picture rii 2 Color ae 50 Press A V and then use 4 Pto adjust the color of the picture baa Tint JA Press A V and then use 4 P to adjust the tint of the picture AE Sharpness Press A V and then use 4 Pto adjust the sharpness of the picture Color Temp Press lt gt to select mode Cool Warm Normal Blue Screen Press A V and then use 4 P to select On or Off 15 Operating Your Television Audio Menu Options G DIIN da lu n 2 Picture Audio Time Setup Lock Channel Press the MENU on the front panel or MENU on the VISE HANE remote control and then use 4 Pto select the AUDIO Bass menu press V or OK to enter it see picture le Balance Surround Sound Auto Volume Sound mode Audio Language English Press A V and then use lt gt to select User Standard Music and Movie RY Select Bass Press A V and then use lt gt increase or decrease the level of the lower pitched sounds Treble Press A V and then use 4 P to increase or decrease the level of higher pitched sounds Balance Press A V and then use 4 P to adjust th
10. e audio output between left and right speakers Surround Sound Press d gt to switch Sound Surround On or Off Auto Volume Press lt gt to switch auto volume control On or Off This function allows volume to be controlled automatically Audio Language Press 4 gt to select the audio language from English French and Spanish Time Menu Options Press the MENU on the front panel or MENU on the SEKI K BB LUE 4 NLANG LA sera SEC RSANE remote control and then use 4 P to select the TIME menu TEA aa ann as press V or OK to enter see picture TimeZone 0 Central DEW illo ESEAS Ma Maat off Sleep Timer Press A V and then use 4 P to set up the sleep timer from among Off 5 Min 10 Min 15 Min 30 Min 45 Min 60 Min 90 Min 120 Min 180 Min or 240 Min RT Select Time Zone Press A V and then use 4 gt to set up the time zone from Pacific Alaska Hawaii Eastern Central or Mountain Daylight Saving Time Press A V and then use 4 P to set up the daylight saving time On or Off 16 Operating Your Television Setup Menu Options Press the MENU on the front panel or MENU on the remote control and then use 4 gt to select the SETUP menu press Y or OKto enter see picture Menu Language Press A V and then use 4 P to select menu language for either English French or Spanish Transparency Press A V and then use 4 P to turn on or off the transparency function Zoom Mode Press A V and t
11. guirement of the Energy Star qualification The ON MODE Power under Home mode should be less than 24W The sleep mode power should be less than 1W 12 Operating Your Television INPUT SOURCE AV Component HDMI1 HDMI2 VGA Menu Quit Auto scanning program is completed Ochannels are memorized Check your antenna or cable connections and try again baa Click here to connect a Game Blu Ray DVD or other player TERG Select Enter Next If channels can not be found this frame will be displayed automatically 13 Use the Up and Down arrows on your remote control or TV keypad to select the channel scan type KO AV Select Enter Next Auto scanning program is completed 1 channels are memorized Complete TERO Select Enter Next Operating Your Television Navigating the Onscreen Display Press the MENU button to display the main menu e Use 4 5 buttons to navigate and select the available menus Bik Naa Picture Audio Time Setup Lock Channel Sound Mode lt Standard Bass Treble Balance Surround Sound d 3 Maa Picture Audio Time Setup Lock Channel Picture Mode lt Energy Saving gt Contrast Brightness Color Tint Sharpness Color Temp Blue Screen Auto Volume On Audio Language English RY Select RS Select NG Picture Audio Time Setup Lock Channel Air Cable lt Cable gt Sleep Timer off Auto Scan Time Zone Central Fa
12. hen use 4 gt to select the zoom for either Wide Wide Zoom Zoom or Standard Noise Reduction Press A V and then use gt to adjust the noise reduction mode for either Weak Middle Strong or Off Advanced Press A V and then use lt gt to select the advanced options between H POS V POS Clock Phase Auto only used in VGA source mode H POS Press A V and then use lt gt to adjust the H POS of the picture V POS Press A V and then use 4 P to adjust the V POS of the picture Clock Press A V and then use 4 P to adjust the Clock of the picture Phase Press A V and then use 4 P to adjust the Phase of the picture Auto Press A V and then use P to adjust the picture Closed Caption Press A V and then use lt P to use the down button to highlight the close caption item then press the RIGHT button to enter into the following menu CC Mode Allows you to select the CC Mode among On Off or CC on Mute Basic Selection Allows you to select the basic selection among CC1 CC2 CC3 CC4 Text1 Text2 Text3 and Text4 Advanced Selection Press A V and then use lt gt to select the advanced selection among Servicel Service2 Services Service4 Service5 or Service6 17 J 2h oe lt Picture Audio Time Setup Lock Channel Menu Language English gt Transparency Off Zoom Mode Standard Noise Reduction Weak Advanced Closed Caption DLC Restore Default RY Select 2 5 Adjust MENT
13. if the picture has not appeared after 5 minutes Poor Color or picture Adjust the color in Menu option Keep a sufficient distance between the product and the VCR Try another channel the problem may be with the broadcast Are the VIDEO cables installed properly Activate any function to restore the brightness of the picture Horizontal vertical bars or picture shaking Check for local interference such as an electrical appliance or power tool Press SOURCE button to select correct source Poor reception on some channels Station or cable experiencing problems Tune to another station Station signal is weak reorient antenna to receive better reception Check for sources of possible interference Lines or streaks in pictures Check the antenna change the direction of the antenna No output from one of the speakers Adjust balance in the Menu option 24 Troubleshooting NOTE When there is a problem in VGA mode only when VGA mode is applied PROBLEM POSSIBLE SOLUTION The signal is out of range Adjust resolution horizontal freguency or vertical freguency Check whether the signal cable is connected or loose Checkthe input source Vertical bar or stripe on background horizontal noise and Set the auto configure or adjust clock phase or H V incorrect position position Screen Color is unstable or is a single Color Check the signal cable Re install the PC video card Maintenance Ea
14. ing accidentally penetrates the ventilation slots or if the set does not work normally e Do not remove the safety covers There are no user serviceable parts inside Trying to service the unit yourself is dangerous and may invalidate the product s warranty Qualified personnel must only service this apparatus e To avoid battery leakage remove exhausted batteries from the remote control or when not using for a long period e Do not break open or throw exhausted batteries on a fire Physical safety Do not block ventilation slots in the back cover You may place the TV in a cabinet but ensure at least 5cm 2 clearance all around Do not tap or shake the TV screen or you may damage the internal circuits Take good care of the remote control To clean the TV use a soft dry cloth Do not use solvents or petroleum based fluids Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades anda third grounding prong the wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs Unplug the appara
15. ith the Lock On Off option e You can set different Parental Control viewing restrictions for general audiences and for children both can be active at the same time Simply specifying one content block such as Sex Scenes will not automatically restrict the programming that appears from the video sources Even if you choose to leave the AUX inputs unblocked the ratings you specify will automatically restrict the programming that appears from the video sources e You can not disable Parental Control by disconnecting the TV from power Block hours will be automatically reset to the original block time setting specified if power is disconnected Information Motion Picture Association of America MPAA Rating System Grade Meaning OO ob General Audiences Content not offensive to most viewers Parental Guidance Suggested Content is such that parents may not want their children to view the program PG 13 Parental Guidance Cautioned Program is inappropriate for preteens with a greater degree of offensive material suggested than a PG rated program Restricted viewing Not for children under 17 Strong element of sex and or violence NC 17 No Children Under age 17 Not for children under 17 under any circumstances Strong sexual content X Hard Core Films Same as NC 17 rating No Rating No Rating MPAA Not Rated TV Parental Guideline Rating System Grade Meaning TV G Parental Audience Considered suitable for all audiences children may watch u
16. l triangle is intended to alert the user to the presence of non insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock Warning To reduce the risk of electric shock do not remove cover or back as there are no user serviceable parts inside Refer servicing to gualified personnel The exclamation point within an eguilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance This equipment is a Class Il or double insulated electrical appliance It has been designed in such a way that it does not require a safety connection to electrical earth Contents Important Safety Instructions non uun naa nn aan naa nn aan naa nn n nn na 2 CA ON ss sos moes ai seer elava uuessa uses ae aseme ee es 4 Safety Information aas AA 5 What s Included 224 004 haaa ee ee ABA WEAR LAMG ANAKAN PG AN DAANAN DAA es 6 Getting Bit LX AA AA 7 8 Front Rear VISW sola ADAN DAAEA NATEN AKN wee deo samu BG NA i 7 8 Wall Mounting 0 00 cc naa aaa ann nn nn n 8 Connecting to External Devices nannan anann ees 9 Remote Control Key Functions 0 eee aa 10 11 Operating Your Television nn uuennuaannnna annan ann nn nn n nn na 12 21 Setup Wizafd ER AA dee aaa mata tasases 12 13 Navigating the Onscreen Display as
17. les and at the point where they exit from the apparatus e Only use attachments accessories specified by the manufacturer e Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart or rack is used use caution when moving the ew cart apparatus combination to avoid injury from tip over Ya bY a A e Unplug the apparatus during lightning storms or when unused for long periods of time e Refer all servicing to qualified personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture does not operate normally or has been dropped e Please keep the unit in a well ventilated environment e WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids such as vases shall not be placed on apparatus e WARNING The wall socket plug is used as disconnect device the disconnect device shall remain readily operable e WARNING The batteries shall not be exposed to excessive heat such as sunshine fire or the like CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE CHOC ELECTRIQUE NE PAS OUVRIR This lightning flash with arrowhead symbol within an equilatera
18. nattended TV MA Mature Audience Only Adults only may contain Strong Dialogue Bad Language Sex and Violent Scenes Canadian Rating Canadian English is used throughout all English speaking Canada C C8 G PG 14 18 Canadian French is used in Quebec G 8 ans 13 anst 16 anst 18 ans Note The V Chip will automatically block certain categories that are more restrictive If you block TV Y category then TV Y7 will be automatically blocked Similarly if you block TV G category then all the categories in the young adult will be blocked TV G TV PG TV 14 and TV MA 22 Troubleshooting If your television does not operate normally or does not turn on please check the following troubleshooting guestions Remember to also check the other connected electronic devices such as DVDs or Blu ray players to pinpoint any problem If the television still fails to operate normally please contact technical support refer to Warranty page SYMPTOM POSSIBLE CAUSE REMEDY Dead No LED lit No power to the TV Check all connections to the TV s AC socket Press either the Power button or the Standby button Dead No LED lit red Set in standby mode on the remote control Blue screen Press SOURCE button to select the correct source Incorrect source selected If using an indoor antenna try adjusting the antenna Noisy snowy ghosting Poor antenna signal postion Check antenna connections picture TV Sou
19. nd Mute Turn sound Mute OFF Volume set too low Check volume settings see leads not connected Check that all external leads are connected properly 23 Troubleshooting Before contacting the service technician perform the following simple checks If any problem still persists unplug the LED TV and call for assistance PROBLEM POSSIBLE SOLUTION No sound and picture Check that the main plug has been connected to a wall outlet Check that you have pressed the POWER button on the front of the TV set Check the picture contrast and the brightness setting Red LED indicator light Set in standby mode Press either the POWER button or the Standby button on the remote control Normal picture but no sound Check the volume Sound muted Press the MUTE button Try another channel the problem may be with the broadcast Are the audio cables installed properly The remote control does not work Check to see if there are any objects between the TV and remote control causing obstruction Are batteries installed with correct polarity Correct remote operating mode set TV VCR etc Install new batteries Power suddenly turns off Is the sleep timer set Check the power control settings Power may be interrupted No broadcast on the station tuned Picture appears slowly after switching on This is normal the image is muted during the product start up process Please contact a service provider
20. on If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user isencouraged to try to correct the interference by one or more of the following measures 1 reorient or relocate the receiving an tenna 2 increase theseparation between the equipment and the receiver 3 connect the equip ment to an outlet on a circuit different from that to which the receiver is connected 4 consult the dealer or an experienced radio TV technician for additional suggestions Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere de fined to be used with the installation of the product they must be used in order to ensure com pliance with FCC regulation Canadian DOC statement Standard Television Receiving Apparatus Canada BETS 7 This Class B digital apparatus complies with Canadian ICES 003 Specifications Panel 60 Hz vs120Hz OM Aspect Ratio JJ aeg Contrast Ratio panel JU 5001 Brightness Centre Typ cd m2 200 Response Time Gto 6 Sms Horizontal Viewing Angle At CR gt 10 90 Vertical Viewing Angle At CR gt 10 65 26
21. r complete coverage The ratings are based on the ages of children Overview To ensure complete coverage for all TV programs movies and regular TV shows choose a rating for MPAA from the selections below as well as ratings from the TV Parental Guidelines Rating Systems below using the Age Block option for General Audiences and for children In addition to those you may wish to add additional restrictions from the content block menu and submenus examples below Things to Consider before Setting up Parental Control Determine which rating you consider acceptable to the viewer For example if you choose TV PG more restrictive ratings will be automatically blocked the viewer will not be able to see TV PG TV 14 or TV MA rated programming Do you want to block the auxiliary video source entirely Blocks the signal sent by the equipment such as VCR connected to the TV Audio Video input jacks Or leave unblocked then choose allowable ratings Block program Content based on individual parameters such as Strong Dialog Bad Language Sex Scenes Violence Scenes or Fantasy Violent Scenes in Content Blk option Select a secret password in the Set Password option using the numbers keys on the remote Do not forget the password it is the only way you can access the Parental Control menu and change rating selections or turn Parental Control off Do you want the Parental Control to be active at all times If not you can turn it on or off w
22. rly malfunctions can be prevented Careful and regular cleaning can extend the amount of time you will have with your new TV Be sure to turn the power off and unplug the power cord before you begin any cleaning Cleaning the screen 1 A great tip to dust off your screen Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent Wring the cloth until it s almost dry and then use to wipe the screen 2 Make sure the excess water is off the screen then let air dry before you turn on the TV Cleaning the Cabinet To remove dirt or dust wipe the cabinet with a soft dry lint free cloth Please be sure not to use a wet cloth Extended Absence If you expect to leave your TV dormant for a long time such as a vacation it is a good idea to unplug the power cord to protect against possible damages from lightning or power surges 25 The FCC Wants You To Know FE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed or used in accordance with the instructions may cause harmful interference to radio communica tions However there is no guarantee that interference will not occur in a particular installati
23. rted waste and must be collected separately As a consumer you are responsible for ensuring that this product is disposed of properly HOM This TV incorporates High Definition Multimedia Interface HDMI technology HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC Safety Information To ensure reliable and safe operation of this eguipment please read carefully all the instructions in this user guide especially the safety information below Electrical safety The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product To prevent overload do not share the same power supply socket with too many other electronic components e Do not place any connecting wires where they may be stepped on or tripped over e Do not place heavy items on them which may damage the leads e Hold the main plug not the wires when removing from a socket e During a thunderstorm or when not in using the television for long periods turn off the power switch on the back of the television e Do not allow water or moisture to enter the TV or power adapter Do NOT use in wet moist areas such as bathrooms steamy kitchens or near swimming pools e Pull the plug out immediately and seek professional help if the main plug or cable is damaged liquid is spilt onto the set if accidentally exposed to water or moisture if anyth
24. set RRT 4 digital password E MRO Return RY Select Change Password ie A Press V button to select the Change Password selection and then press KLAAS AP AA Time Sako Lode MAHA the gt button to enter into the following menu Input the 4 digit password Enter New Password once and again to confirm onfirm Passwor lt System Lock Allows you to turn On or Off the system lock If you turn off the system lock then the following options US Canada RRT Setting and Reset RRT are unavailable for use WENT Return US Rating Use the Y button to highlight the US selection then press the P button to enter into the following menu Canada Rating Use the Y button to highlight the Canada selection then press the gt button to enter into the following menu Canada English arte Use lt gt buttons to select among E C C8 G PG 14 and 18 creer Canada French Use lt gt buttons to select among E G 8ans 13ans 16ans and 18ans RRT Setting TS Select WENT Return Rating Region Table setting Reset RRT Allows you to reset the RRT setting Clear Lock Clear lock of RRT 19 Operating Your Television Channel Menu Options Press the MENU on the front panel or remote control and then use 4 P to select the CHANNEL menu Press V or OK to enter see picture IKI Kd Ki Kod EAS pmd ki Picture Audio Time Setup Lock Channel Air Cable Air Cable lt Cable Allows you to selec
25. t the input signal between Air and Cable Ha eae Favorite Show Hide Channel No Channel Label DTV Signal If you select Air as the input signal in the Antenna item you can press the P button to search the channels automatically The receiver channels will be stored automatically When searching channels press MENU to stop RY Select Start to Scan gt If you select Cable as the input signal in the Antenna item this allows you to select Cable System between AUTO STD IRC and HRC Use the Y button to highlight Start to Scan then press the P button to search the channels automatically The receivable channels will be stored automatically When searching channels press MENU to stop na MENU Return a gt gu Time Setup Lock Channel RF CH Found MENO Return Auto Scan Use the Y button to highlight Auto Scan then press the 9 button to enter into the menu Favorite Allows you to add any channels that you flag to your favorite channel list Use the A YV button to highlight the Favorite channel then press the 9 button to enter into the menu Use the A V button to highlight the desired channel then press the OK button to add or remove the highlighted channel as a favorite FIKI KA KA 11 Ba L Picture Audio Time Setup Lock Channel Channel Channel Name Favorite 50 2 070 219 NA 50 3 KOCE LB NA RV Move Press OK change WENT Return 20 Operating
26. tus during lightning storms or when unused for long periods Refer all servicing to a qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Please always connect your television to a power outlet with protective ground connection What s Included Unit and Accessories Remote control with batteries SEIKI Rol Panal Initial Assombly LCD Television c mae ere SC1 1F5 fi MIK Pasil Ni i ws saf a mina aga an TL A a a LCD a UE Ei ka F fr a i a LAS Pr gt x A az User s Manual warranty card died The stand support The base stand Screw TPW3X12A HO 4PCS Getting Started Front View ard TI IR LED Infrared The LED light indicates when the Receiver LCD TV is activated The function of the buttons are described below POWER Turn on standby the TV set SOURCE Press to display the input source menu MENU Press to display the OSD menu press again to exit the menu CH Press to scan through channels VOL Press to adjust the volume Getting Started Rear View Sa IC cE a SERVICE HDMI2 HDMI1 VIDEO ASO kalal 1 ra G OL 1
27. vorite Daylight Saving Time Off Show Hide Channel No Channel Label DTV Signal RY Select RY Select MENT Exit got LOL As Ka Kk 3 E 3 Picture Audio Time Setup lock Channel Picture Audio Time Setup Lock Channel Enter Password ma Menu Language English gt Transparency Oil Zoom Mode Standard Noise Reduction Weak Advanced Closed Caption DLC Restore Default RS Select RY Select Choosing a TV Channel 1 Use the CH CH on the front panel or on the remote control e Press CH to increase the channel e Press CH to decrease the channel 2 Using O 9 remote keys Enter the channel number with the 0 9 remote keys then press OK to select the channel For example 1 Press 4 then press OK to select channel 4 2 Press 4 then press 5 then press OK to select channel 45 3 Press 1 then press 2 then press 1 finally press OK to select channel 121 14 Operating Your Television Selecting Input Source You can display the input screen menu by pressing SOURCE onthe remote control or SOURCE on the front panel press A V button to select press OK to confirm INPUT SOURCE AV Component HDMI1 HDMI2 VGA Picture Menu Options Press the MENU on the front panel or MENU on the remote control and then use 4 p to move the PICTURE menu press V or OK to enter see picture below Picture Mode Select the type of picture which best corresponds to your viewing preferen
Download Pdf Manuals
Related Search