Sanyo SC-X2017 User's Manual
Contents
1. the airflow control on the hose Figure_3 7 Combination nozzle Use the crevice nozzle to vacuum edges and gaps The head of the combination nozzle can rotate Use the round brush to vacuum sofa curtain or fragile or easily scratched items 8 Turn off the machine press the on off switch button again the machine is turned off Pull the plug out of the power socket Figure 2 9 Cord reminder Before rewinding be sure to the cord is unplugged To rewind the power cord press the cord rewind button The cord will be drawn in Figure 4 10 Moving the machine Carrying it by using the carry handle Figure 5 Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 _ mw Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 Maintenance Caution Be sure to turn the power off and unplug the unit before cleaning 1 Clear the dust 1 Take out the dust cup and empty the dust Figure 6 2 Clean the dust cup with water if necessary 2 Clean Filters 1 Rotate the filter and detach from the filter grill Wash the filter in warm water and dry completely before put it back Be sure to dry naturally to prevent deformation Figure 7 8 9 4 2 To clean the motor protection filter take out the filter and wash in water It can be used after drying completely before put it back and be sure to dry naturally to prevent deformation It should be washed at least once a year Figure 10 If the filter is damaged replace2. with new filter Technical Specification Input power 2000W Input voltage 230 240V 50Hz Protection class Il Power cord length 5m Dust capacity 3L Trouble Shooting If you have a problem with you cleaner consult the handy guide below If the cleaner is malfunctioning do not operate it before asking for service Clean the filter and empty the dust cup Noisy operation Clean or replace the filter Low Suction Remove the blockage Put the dust cup in place Over heating Clean the filters and empty the dust cup Check for Automatically blockages and unblock and allow it to cool Stopping Plug unit firmly Nozzle is clipped into a compartment at the bottom edge on the back of the vacuum cleaner between the wheels It is a single attachment Cannot Find the Combination Nozzle Due to the strong suction power it may be difficult to push especially thick carpet Rather than force to use the floor brush lift up the Floor Brush momentarily to allow air to flow into the vacuum releasing to the built up suction pressure then do well to push floor brush Slide and open the suction adjusting plate located on the hose handle grip This will reduce suction power of the floor head ee END Pull out the cord and rewind again rewind SANYO Electric Co Ltd Made in China Floor Brush hard to push
3. SANYO INSTRUCTION MANUAL SC X2017 Vacuum Cleaner Thank you for your purchase of a SANYO Vacuum Cleaner Please read these instructions carefully before using this product and keep safe for further reference Table of Contents Precautions mm nn nn 1 2 Introduction Of Parts m 2 3 Use Instructions MTM 3 4 Maintenance nn 4 5 Technical Specification 5 Troubleshooting enr nenn 6 Warning 1 This vacuum cleaner is intended for household use only 2 Any maintenance and repair must be handled by professional technician Please do not try to repair by yourself which may cause danger 3 The plug must be removed from the power socket before any maintenance or replacement Precautions Do not leave appliance when plugged in Unplug from outlet when not in use Do not use outdoors or on wet surfaces Do not allow to be used as a toy Children should be supervised to ensure that they do not play with the appliance The appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance
4. by a person responsible for their safety Use only as described in this manual Use only supplied attachments Do not use with damage cord or plug If appliance is not working as it should has been dropped damaged left outdoors or dropped into water it must be repaired by qualified service agent Do not pull or carry by cord pedal cord use cord as a handle close a door on cord or pull cord around sharp edges or corners Do not run appliance over cord Keep cord away form heated surfaces Do not handle plug or appliance with wet hands Do not put any object into openings Do not use with any opening blocked keep free of dust lint hair and anything that may reduce air flow Keep hair loose clothing fingers and all parts of body away from openings and moving parts Do not pick up anything that is burning or smoking such as cigarettes matches or hot ashes Do not use without filters in place Turn off all controls before unplugging Use extra care when cleaning stairs Do notuse to pick up flammable or combustible liguids such as gasoline or use in ashes when they may be present Unplug before connecting any hose attachment accessory 1 Hold plug when they rewinding onto cord reel Do not allow plug to whip when rewinding Unplug before connecting any hose attachment accessory Avoid using in a vertical position If the supply cord of this appliance is damaged ask the shop which you bought or it must only be replaced by prope
5. rly gualified service personnel because a special purpose tool is reguired If you find the motor temperature too high or any unusual noise should be smell or smoke found when using stop the operation and unplug Do not repair the appliance by yourself Introduction of Parts 8 7 5432 1 1 Power cord 2 Handle 3 On off switch pedal 4 Speed control button 5 Cord rewinding pedal 6 Upper cover 7 Hose socket 8 Dust bin 9 Dust barrel 10 Big wheel 11 Plastic tube 12 Floor brush 13 Integrated brush amp nozzle 14 Flexible hose Accessories 1 set hose accessory 1 piece floor brush 1 set tube 1 integrated brush nozzle 1 To connect the hose press the buttons on the hose end and insert the hose into the hose socket until the hose locks To detach press the buttons and pull the hose toward you Figure_1 2 Connect the telescopic tube firmly to the handle of hose 3 Connect the floor brush or the combination nozzle firmly into the telescopic tube 4 Before starting operation pull out the power cord and then insert the plug into the power socket which conforms to that on the rating label for power supply 5 Turn on the machine Press the on off button to start Figure 2 6 The machine would start working without speed control To control suction power slide the speed control on the body Suction power can also be controlled by sliding
Download Pdf Manuals
Related Search