Samsung SCC-B5352N User's Manual
Contents
1. 10 id 12 A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn a Ar Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and hese openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or he manufacturer s instructions have been adhered to Power Sources This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your product dealer or local power company For products intended to operate from battery power or other sources refer to he operating instructions Grounding or Polarization This product may be equipped with a polarized 13 14 15 alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact y2. Components of your camera Your camera has the following componen Video connector Power connector y Cover dome Covers the inner cover lens and main body to protect them Inner cover Covers the main body to protect it Wing locker Push a long thin screwdriver into its narrow spot and press it outward when you want to remove the inner cover Main body Includes a lens a switch board a PCB board screws and such Mount bracket Used as a ceiling or wall fixture It is fixed using three long tab screws provided in the package Ceiling mount opener Remove it for line connection to the ceiling when it is installed on the ceiling Zoom lever Using this lever the lens zoom can be adjusted and fixed Focus lever The lens focus can be adjusted by rotating it left or right Rotate it clockwise for fixing Tilt fixing screw Using this screw the slope of the lens can be adjusted and fixed Switch board Includes two kinds of control switches such as function switches and phase control switches The board has eight function switches in the middle and two phase control buttons on each side of the function switch area Groove mark To attach the Main body to the Mount bracket align this groove mark on the Main body with the wide groove in the CAMERA FRONT side on the Mount bracket Locker Used to open or close
3. Overview introduces the user guide and product related information This chapter m Chapter 2 Installation explains how to set and install the product m Appendix Specifications provides the specifications of the product I Product overview This is the high resolution 540 TV lines dome camera equipped with a Vari focal lens which has no dynamic delay when implementing motion pictures and provides the features such as digital noise reduction DNR by real time CCD defect compensation low speed shutter LSS Auto x128 to implement clear picture quality Day Night color compensation and the like I Main features m Power DC 12V AC 24V Special functions Line lock LL control Auto white balancing Horizontal vertical image reversing Flickerless control Low shutter speed control Backlight compensation control Automatic switching between color and black amp white modes Equipped with vari focal lens Auto Iris function Digital noise reduction DNR Dynamic CCD defect compensation I Components Checking components in the package Please check your camera and accessories are included in the package Those components are as shown below Camera Test Monitor Cable ES SS ev Tab screw User s Guide The test monitor cable is used to test the camera by connecting to a portable display If you really want to connect the camera to a monitoring display use the BNC cable
4. BNC Test Monitor OUT 1 0 Vp p 750hm Harness cable Lens Auto Iris DC Focal length 2 5 to 6 0mm Aperture ratio 1 2 PAN function Range 0 to 355 100 degree clockwise and 255 degree counterclockwise TILT function Range 0 to 90 Line Lock LL Sens Up Low Speed Shutter LSS Horizontal Reverse H REV Vertical Reverse V REV Controls Backlight compensation BLC Flickerless FL Switching between color and B amp W modes D N Auto white balancing AWB Digital noise reduction DNR Dynamic CCD defect compensation Product color SCC B535xP White SCC B535xSP Dark Silver Operation temperature 10 C to 50 C Operation humidity Up to 90 Size 128 2 x 91 H mm Weight 3279 16
5. Never push objects of any kind into this produc through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric hock Never spill liquid of any kind on the product 20 Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 21 Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c If the product has been exposed to rain or water d If the product does not operate normally by following the operating instructions Adjust only those controls hat are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation e If the product has been dropped or damaged in any way and When the product exhibits a distinct change in performance this indicates a need for service 22 Replacement Parts When replacement parts are required be sure the service echnician has used replacement parts specified by the manufacturer or have he same characteristics a
6. Switch 6 FL When this switch is set to ON the shutter speed is fixed to 1 100 sec for NTSC or 1 120 sec for PAL to prevent screen from flickering by the disaccordance between vertical synchronous frequency 50Hz for NTSC 60Hz for PAL and on and off frequency of a light Switch 7 D N When this switch is set to ON the camera automatically switches between color and B amp W according to the brightness of the vicinity Switch 8 AWB This switch adjusts white balancing When this switch is set to ON this camera operates in ATW mode and in case of OFF this camera operates in AWC mode ATW Auto Tracking White Balance The color temperature is automatically adjusted according to the environmental change Approx 2000 K to 11 000 K AWC Auto White Balance Control It stores the color temperature just when the switch is changed to OFF Accordingly color temperatures are adjusted by the stored value The IRIS setting range for the camera is approximately 80 to 120 IRE It means the camera does not provide the IRIS full open close feature but the restricted variation range Use the camera after setting to the proper level 80 IRE or above because the IRIS hunting may occur when the level is 75 IRE or below 11 I Connecting cables and changing the settings Before installing your camera you have to adjust the lens focus zoom and switch settings L BNC Cable To adjust the lens focus zoom and function sett
7. a Digital Color Dome Camera User s Guide SCC B535x S H eve ves aus Innswug EXPLANATION OF SAFETY RELATED SYMBOLS CAUTION AN RISK OF ELECTRIC nN SHOCK DO NOT OPEN The lighting flash and Arrowhead within Triangle is a warning sign alerting you of dangerous voltage inside the product TO QUALIFIED SERVICE PERSONNEL product This symbol indicates high voltage is present inside It is dangerous to make any kind of contact with any inside part of this product This symbol alerts you that important literature concerning operation and maintenance has been included with this product To prevent damage which may result in fire or electric shock hazard do not expose this appliance to rain or moisture WARNING 1 Be sure to use only the standard adapter that is specified in the specification sheet Using any other adapter could cause fire electrical shock or damage to the product 2 Incorrectly connecting the power supply or replacing battery may cause explosion fire electric shock or damage to the product CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE REAR COVER NO USER SERVICEABLE PARTS INSIDE REFER instructions accompanying the The explanation point within the triangle is a warning sign alerting you of important Do not connect multiple cameras to a single adapter Exceeding the capacity may cause abnormal heat generation or fire Securely plug the power cor
8. a to use the phase of the AC power as the synchronization reference In this mode you can use the phase control buttons INC DEC When you are using the DC 12V power set this switch to OFF The line lock feature will not normally operate even when the switch is set to ON Set the LL switch to ON while the AC power is connected If any picture roll happens you have to adjust the phase using the phase control buttons Press the INC or DEC button to increase or decrease the phase by one degree 10 Switch 2 LSS This sens up mode accumulates the image fields in memory to reduce noise but increase the brightness and contrast rate When this switch is set to ON the camera automatically switches to a maximum of 128 times of image acquisition speed to implement a clear picture for darker image Switch 3 H REV When this switch is set to ON the camera image is reversed horizontally If you want to monitor your site using a mirror you can use this feature to see the right image Switch 4 V REV When this switch is set to ON the camera image is reversed vertically If your camera reluctantly displays the vertically reversed image you can use this feature to see the right image Switch 5 BLC When this switch is set to ON you can view a clear image even though the camera faces any excessive light such as sunlight and fluorescent light When it is set to OFF the subject with excessive light is not clearly shown
9. cal Code ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes andrequirements for the grounding electrode A AN ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT 5 NEC SECTION S10 21 E 2 GROUND CLAMPS ELECTRODE SYSTEM NEC ART 250 PART H NEC NATIONAL ELECTRICAL CODE 16 Lightning For added protection for this product during a lightning storm or when Itis left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges NEC SECTION S10 20 Ly le CONDUCTORS POWER SERVICE GROUNDING 17 Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal 18 Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 19 Object and Liquid Entry
10. d into the power receptacle Insecure connection may cause fire When installing the camera fasten it securely and firmly A falling camera may cause personal injury Do not place conductive objects e g screwdrivers coins metal things etc or containers filled with water on top of the camera Doing so may cause personal injury due to fire electric shock or falling objects Do not install the unit in humid dusty or sooty locations Doing so may cause fire or electric shock 8 If any unusual smells or smoke come from the unit stop using the product In such case immediately disconnect the power source and contact the service center Continued use in such a condition may cause fire or electric shock 9 If this product fails to operate normally contact the nearest service center Never disassemble or modify this product in any way SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair 10 When cleaning do not spray water directly onto parts of the product Doing so may cause fire or electric shock CAUTION 1 Do not drop objects on the product or apply strong shock to it Keep away from a location subject to excessive vibration or magnetic interference 2 Do not install in a location subject to high temperature over 122 F 50 C low temperature below 14 F 10 C or high humidity Doing so may cause fire or electric shock 3 If you want to relocate the alrea
11. dy installed product be sure to turn off the power and then move or reinstall it 4 Remove the power plug from the outlet when then there is a lightning Neglecting to do so may cause fire or damage to the product 5 Keep out of direct sunlight and heat radiation sources It may cause fire 6 Install it in a place with good ventilation 7 Avoid aiming the camera directly towards extremely bright objects such as sun as this may damage the CCD image sensor FCC Statement This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense IC Compliance Notice This Clas
12. e a correct direction image Appendix A Specifications for NTSC Standard Item Details Product type CCTV color dome camera Power input AC 24V 10 60Hz 0 3 Hz DC 12V 10 5 Broadcast type NTSC Standard System 525 Lines 60 Fields Power consumption Approx 1 7W Image device 1 3 inch IT Type Super HAD CCD Total 811 H x 508 V 410 000 pixels Effective 768 H x 494 V 380 000 pixels Scanning mode 525 Lines 2 1 Interlace Horizontal 15 734Hz INT 15 750Hz LL Vertical 59 94Hz INT 60Hz LL Synchronization mode INT Line Lock Adjusting the phase using INC DEC button Pixels Scanning line frequency Horizontal resolution 540 TV Lines SCC B53X3 Color BW SCC B53X2 Color BW SOIRE 0 4 0 04Lux 0 4 0 4Lux Sens up Off 30IRE 0 24 0 024Lux 0 24 0 24Lux Min object illumination F12 15IRE 0 12 0 012Lux 0 12 0 12Lux i SOIRE 0 0031 0 00031Lux 0 0031 0 0031Lux Sens up x128 30IRE 0 0019 0 00019Lux 0 0019 0 0019Lux 15IRE 0 0009 0 00009Lux 0 0009 0 0009Lux Signal output COMPOSITE Video 1 0 Vp p 750hm BNC Test Monitor OUT 1 0 Vp p 750hm Harness cable Lens Auto Iris DC Focal length 2 5 to 6 0mm Aperture ratio 1 2 PAN function Range 0 to 355 100 degree clockwise and 255 degree counterclockwise TILT function Range 0 to 90 Line Lock LL Sens Up Low Speed Shutter LSS Horizontal Reverse H REV Vertical Reverse V REV Bac
13. ings Monitor 2 To connect cables Te Connect the BNC cable to the Video connector attached on your camera Connect the BNC cable to the Video Input on a monitor Connect the power adapter to the Power connector attached on your camera When the monitor is turned on the camera image appears 1 Remove the Cover dome and Inner cover For more details about the removing procedures see Installation procedure in the Installing camera section on the next page 2 Adjust the focus zoom and function settings of your camera using the Focus lever Zoom lever and Switch board while you are viewing the image on the screen 3 If you want to fix the adjusted focus and zoom screw up the levers 12 I Installing camera Before installation Before installing your camera you have to read the following cautions You have to check whether the location ceiling or wall can bear five times the weight of your camera Don t let the cable to be caught in improper place or the electric line cover to be damaged Otherwise it may cause a breakdown or fire When installing your camera don t allow any person to approach the installation site If you have any valuable things under the place move them away Installation procedure r To install your camera 1 Press the Locker button on the bottom of your camera and remove the Cover dome from the Main body using the other hand The Main body and Inner cover will be expo
14. klight compensation BLC Controls Flickerless FL Switching between color and B amp W modes D N Auto white balancing AWB Digital noise reduction DNR Dynamic CCD defect compensation Product color SCC B535xN White SCC B535xSN Dark Silver Operation temperature 10 C to 50 C Operation humidity Up to 90 Size 128 2 x 91 H mm Weight 327g 15 Appendix B Specifications for PAL Standard Item Details Product type CCTV color dome camera Power input AC 24V 10 50Hz 0 3 Hz DC 12V 10 5 Broadcast type PAL Standard System 625 Lines 50 Fields Power consumption Approx 1 7W Image device 1 3 inch IT Type Super HAD CCD Pixels Total 795 H x 596 V 470 000 pixels Effective 752 H x 582 V 440 000 pixels Scanning mode 625 Lines 2 1 Interlace Scanning line frequency Horizontal 15 625Hz INT 15 625Hz LL Vertical 50Hz INT S0Hz LL Synchronization mode INT Line Lock Adjusting the phase using INC DEC button Horizontal resolution 540 TV Lines SCC B53X3 Color BW SCC B53X2 Color BW SOIRE 0 4 0 04Lux 0 4 0 4Lux Sens up Off 30IRE 0 24 0 024Lux 0 24 0 24Lux Min object illumination F12 15IRE 0 12 0 012Lux 0 12 0 12Lux i SOIRE 0 0031 0 00031Lux 0 0031 0 0031Lux Sens up x128 30IRE 0 0019 0 00019Lux 0 0019 0 0019Lux 15IRE 0 0009 0 00009Lux 0 0009 0 0009Lux Signal output COMPOSITE Video 1 0 Vp p 750hm
15. our electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug Alternate Warnings This product is equipped with a three wire grounding type plug a plug having a third grounding pin This plug will only fit into a grounding type power outlet This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the grounding type plug Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the product Protective Attachment Plug The product is equipped with an attachment plug having overload protection This is a safety feature See Instruction Manual for replacement or resetting of protective device If replacement of the plug is required be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug Outdoor Antenna Grounding If an outside antenna or cable system is ELECTRIC SERVICE EQUIPMENT connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electri
16. s A digital apparatus meets all requirements of the Canadian interference Causing Equipment Regulations of ICES 003 IMPORTANT SAFETY INSTRUCTIONS Read Instructions All the safety and operating instructions should be read before the product is operated Retain Instructions The safety and operating instructions should be retained or future reference Heed Warnings All warnings on the product and in the operating instructions should be adhered to Follow Instructions All operating and use instructions should be followed Cleaning Unplug this product from the wall outlet before cleaning Do not use iquid cleaners or aerosol cleaners Use a damp cloth for cleaning Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards Water and Moisture Do not use this product near water for example near a bath tub wash bowl kitchen sink or jaundry tub in a wet basement or near a swimming pool and the like Accessories Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Any mounting of the product should ollow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer
17. s the original part Unauthorized substitutions may result in fire electric shock or other hazards 23 Safety Check Upon completion of any service or repairs to this product ask he service technician to perform safety checks to determine that the product is in proper operating condition 24 Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer 25 Heat The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Apparatus shall not be exposed to Contents Overview About this guide Product overview Main features Components Checking components in the package Components of your camera Installation Setting switches Setting function switches Connecting cables and changing the settings Installing camera Before installation Installation procedure Adjusting the camera direction Appendix A Specifications for NTSC Standard 15 Appendix B Specifications for PAL Standard Overview I About this guide This user guide includes basic instructions for the product It is recommended that all users read this guide before use This guide is divided as follows m Chapter 1
18. sed to you 2 To install and adjust your camera you have to first remove the Inner cover To remove the Inner cover from the Main body push a long thin screwdriver into the narrow spot of the Wing locker and press it outward to remove the cover 3 Remove the Mount bracket from the Main body by rotating the Main body in the UNLOCK direction while pushing the Lock releaser outward If it is not easily done rotate the Mount bracket in the LOCK direction while holding small holes on the Mount bracket 4 Fix the Mount bracket to the location ceiling or wall with supplied three screws Ceiling mount The CAMERA FRONT sign on the Mount bracket opener should face the camera monitoring area 13 14 When you install the Mount bracket on the ceiling remove the Ceiling mount opener by pressing it hard to connect the line attached on your camera through the hole in the ceiling Otherwise you can use the empty space opposite to the CAMERA FRONT sign for line connection Now attach the Main body to the Mount bracket by rotating it in the LOCK direction after aligning the Groove mark on the Main body with the wide groove around the CAMERA FRONT inlay Adjust the camera direction For more details on the direction control see Adjusting the camera direction on the same page When required to adjust the zoom and focus for your camera see Connecting cables and changing the settings on page 10 Attach the Inner cover
19. the Cover dome To open the cover dome press the locker Lock releaser Push it outward and rotate the main body in UNLOCK direction when you want to remove the Mount bracket from the Main body or to remove the installed camera from the Mount bracket 14 Cable Connect the Video connector to BNC cable and Power connector to power adapter Installation I Setting switches Setting function switches To set the available functions on your camera adjust eight switches as shown below Name Brief description LL Line lock ON OFF LSS Sens up or Low speed shutter ON OFF H REV Horizontal reverse ON OFF V REV Vertical reverse ON OFF BLC Backlight compensation ON OFF FL Flickerless ON OFF DIN Automatic switching between color and black amp white ON OFF AWB Automatic white balance ON OFF 1 Switch 1 LL When this switch is set to OFF the camera operates in the internal synchronization mode while when it is set to ON the camera operates in the line lock mode In the internal synchronization mode the camera always uses an inside crystal oscillator for synchronization However if multiple cameras are connected to a sequential switcher picture rolling or flickering may occur when switching from one camera to another In this case you can set this switch to ON to solve this problem The line lock mode allows the camer
20. to the Main body by pressing it until a click sound is heard after aligning two screw holes on the Wing lockers of the Inner cover with two screw holes on the Main body s left and right sides Finally attach the Cover dome to the Main body by pressing it until a click sound is heard after aligning the bump inside the Cover dome with the Groove mark on the Main body Adjusting the camera direction When the camera is fixed on the ceiling you can adjust Panning the camera viewing angle You can rotate your camera leftward or rightward Panning and can change the slope of your camera upward or downward Tilting In case of panning the rotation limit of your camera is set to 355 degree 100 degree clockwise and 255 degree counterclockwise The rotation is stopped by the Stopper inside of the camera For panning control first unfasten two screws located on the bottom and rotate in the direction you want and then fasten them to fix the camera In case of tilting you can change the slope of your camera from zero to 90 degree However if the slope angle is under 17 degree you can encounter a partial image hide problem To fix the location after adjusting the tilting angle use the Tilt fixing screws Lens rotation To adjust the focus and zoom of your camera use the Zoom lever and Focus lever When you install the camera on the inclined ceiling or wall you can rotate the camera lens to se
Download Pdf Manuals
Related Search