Home

Samsung SND-7082 User's Manual

1. 11 12 13 14 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water MAIAYSAO Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lighting storms or when unused for A long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparat
2. Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution Neither the name of the incremental nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Copyright c 1998 2001 Un
3. Subject Enter a subject for your email Body Provide the text for the massage Attach the alarm or event images to the email that you are preparing 4 When done click Apply EE I English _101 NJJY0S dNLAS Setup screen Storage You can set the record conditions or the use of recording for the SD memory check the size of stored data or format the SD memory itself 1 From the Setup menu select the lt Event FJ gt tab 2 Click lt Storage gt To make recording on the SD memory 1 Check the memory card s lt Free gt size and lt Total gt size 2 If there are sufficient free space set the device to lt On gt Otherwise check the stored data and if you find them not important then click lt Format gt to format the SD memory f your SD memory card writes slowly only one frame per second will be stored For a SD memory card with a large capacity the formatting will be slowed down accordingly Setting to higher options of resolution bit rate and frame rate increases the amount of data produced As the size of data grows transferred video can be stored only at 1 fps even if you set the record quality to full frames 3 Specify the storage action e Record profile Shows recording profile s codec type e Overwrite If the SD memory is full this will delete old data and store new data in replacement e Pre alarm duration Specify the time point before the occurrence
4. i 2 3 4 5 6 7 I Scan Gam Pa f 8 9 ao i az a3 Item Description Model name of the connected camera Device Name Click the column to sort the list by model name However search will be stopped if clicked during the search Alias This function is not currently implemented Displays either lt Static gt lt Dynamic gt or lt PPPoE gt for the current network 09 N Mode connection status Ethernet address for the connected camera Halla Click the column to sort the list by Ethernet address However search will be stopped if clicked during the search IP address IP Address Click the column to sort the list by IP address However search will be stopped if clicked during the search Network setting for the camera Protocol The factory default is IPv4 Cameras with the IPv6 setting will be displayed IPv6 o e 54_ network connection and setup Item Description DDNS URL address enabling access from the external Internet 7 URL However this will be replaced with the lt IP Address gt of the camera if DDNS registration has failed 8 IPv4 Scans for cameras with the IPv4 setting 9 IPv6 Scans for cameras with the IPv6 setting Activated in an IPv6 compliant environment only a 10 Search scans for cameras that are currently connected to the network Z However this button will be grayed out if neither IPv4 nor IPv6 is c
5. 1 12 You or Your means an individual or a legal entity exercising rights under and complying with all of the terms of this License or a future version of this License issued under Section 6 1 For legal entities You includes any entity which controls is controlled by or is under common control with You For purposes of this definition control means a the power direct or indirect to cause the direction or management of such entity whether by contract or otherwise or b ownership of more than fifty percent 60 of the outstanding shares or beneficial ownership of such entity 2 Source Code License 2 1 The Initial Developer Grant The Initial Developer hereby grants You a world wide royalty free non exclusive license subject to third party intellectual property claims a under intellectual property rights other than patent or trademark Licensable by Initial Developer to use reproduce modify display perform sublicense and distribute the Original Code or portions thereof with or without Modifications and or as part of a Larger Work and b under Patents Claims infringed by the making using or selling of Original Code to make have made use practice sell and offer for sale and or otherwise dispose of the Original Code or portions thereof c the licenses granted in this Section 2 1 a and b are effective on the date Initial Developer first distributes Original Code under the terms
6. Click lt Video setup gt Select a lt Video source gt mode e Flip mode Turn upside down the image that is captured by the camera e Mirror mode Flip horizontal the image that is captured by the camera 4 Select the video type Specify the privacy zone When done click Apply 78_ setup screen To set the privacy zone You can specify a certain area of the camera video to be protected for your privacy 1 2 Select the type and color masking of Set it to lt On gt When done click Apply desired privacy area e Rectangle Place the cursor at a point in the video and drag it to whatever you need You can overlap rectangles for privacy area setup e Quadrilateral Select 4 vertices forming a quadrilateral on the video N3JY0S dNLIJS 4 Click on the video screen and drag to set the desired area Provide a name and press OK If you want to delete an area in the list select one and click Delete EJ Audio setup You can configure the I O settings of the audio source from the camera 2 Click lt Audio setup gt From the Setup menu select the Set the audio input value lt Video amp Audio EJ gt tab e Source Sets the audio input Line Line In audio input External microphone 3 5mm jack type powered active external microphone Internal microphone Microphone that is built in in the camera Only for SNB 7002 e
7. English _121 Setup screen Profile access You can check the profile information 1 From the Setup menu select the lt System J gt tab 2 Click lt Profile access gt e Profile access Show the information of the newly added profile Profile Show the information of the newly added codec Bitrate kbops Show both the actual bit rate and the set bit rate Framerate fos Show both the actual frame rate and the set frame rate ATC Show the ATC status Concurrent users count Show the number of concurrent users who access the profile e Current users Shows information on users accessing web viewer and displaying monitoring video Profile Show the name of the profile accessed by the user P address Show the IP address of the current user Bitrate kops Show the current bit rate Network connection status You can check the network connection status 4 m To check information on the profile currently used click lt Profile access gt again to refresh it 122_ setup screen aooendx SPECIFICATION Description Items SNB 7002 SND 7082 SNV 7082 Imaging Device 1 3 3 1M PS CMOS XIGNAddV Total Pixels 2 064 H X 1 578 V Effective Pixels 2 052 H X 1 536 V Scanning System Progressive Min Illumination Color 0 7 Lux F1 2 SOIRE 0 011 Lux Sens up 60 Video B W 0 07 Lux F1 2 50IRE 0 001 Lux Sens up 60X S
8. SAMSUNG TECHWIN NETWORK CAMERA SNB 7002 SND 7082 User Manual SND 7082F SNV 7082 CE lt lt Network Camera User Manual Copyright 2012 Samsung Techwin Co Ltd All rights reserved Trademark an SAMSUNG TECHWIN is the registered logo of Samsung Techwin Co Ltd The name of this product is the registered trademark of Samsung Techwin Co Ltd Other trademarks mentioned in this manual are the registered trademark of their respective company Restriction Samsung Techwin Co Ltd shall reserve the copyright of this document Under no circumstances this document shall be reproduced distributed or changed partially or wholly without formal authorization of Samsung Techwin Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document but no formal guarantee shall be provided Use of this document and the subsequent results shall be entirely on the user s own responsibility Samsung Techwin reserves the right to change the contents of this document without prior notice Design and specifications are subject to change without prior notice The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product Note that the security and other related issues caused by the unchanged password shall be responsible for the user Overview IMPORTANT SAFETY INSTRUCTIONS eo SS oS 10
9. SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Copyright c 2005 2012 Thomas BERNARD All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of Thomas BERNARD nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DI
10. lt E mail configuration gt and enter select a desired value e FIP configuration Server address Enter the IP address of the FTP server that you transfer the alarm or event images to ID Enter the user ID with which you will log in to the FTP server Password Enter the user account password for logging into the FTP server Upload directory Specify the FTP path where you will transfer the alarm or event images 100_ setup screen Port The default port of the FTP server is 21 however you can use a different port number according to the FTP server settings Passive mode Select lt On gt if you need to connect in passive mode due to the firewall or the FTP server settings e E mail configuration Server address Enter the IP address of the email server that you transfer the alarm or event images to Use authentication Select whether to use authorization Use SSL Specify the use of SSL ID Enter the user ID for logging into the email server Password Enter the user account password for logging into the email server Port The default port of the email server is 25 however you can use a different port number according to the email server settings Recipient Enter the address of the email recipient Sender Enter the address of the email sender If the sender address is incorrect the email from the sender may be classified as SPAM by the email server and thus may not be sent
11. you may not use this file except in compliance with the License You may obtain a copy of the License at http Avww mozilla org MPL Software distributed under the License is distributed on an AS IS basis WITHOUT WARRANTY OF ANY KIND either express or implied See the License for the specific language governing rights and limitations under the License The Original Code is The Initial Developer of the Original Code is Portions created by are Copyright C _ All Rights Reserved Contributor s Alternatively the contents of this file may be used under the terms of the license the __ License in which case the provisions of License are applicable instead of those above If you wish to allow use of your version of this file only under the terms of the ___ License and not to allow others to use your version of this file under the MPL indicate your decision by deleting the provisions above and replace them with the notice and other provisions required by the ___ License If you do not delete the provisions above a recipient may use your version of this file under either the MPL or the __ License NOTE The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the Original Code You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for Your Modifications This equipment has been tested and found to compl
12. 2009 ScienceLogic LLC All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions aremet yy Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer yy Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution yy Neither the name of ScienceLogic LLC nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
13. THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Part 3 Cambridge Broadband Ltd copyrightnotice BSD Portions of this code are copyright c 2001 2003 Cambridge Broadband Ltd All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met yy Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer yy Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution yy The name of Cambridge Broadband Ltd may not be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY
14. XIGNAddV Sens up Frame Integration EN RNA AGC Auto Gain Control Off Low Middle High White Balance ATW AWC Manual Indoor Outdoor Electronic Shutter Speed Auto A FLK Manual 1 30 12 000sec Digital Zoom Flip Mirror Off On l __ Audio Detection Face Detection Tampering Virtual Line Operational p Intelligent Video Analytics Enter Exit Appear DSen Alarm 1 0 Digital Input 1ea Digital Output 1ea Remote Control Interface RS 485 Protocol Alarm Triggers Motion detection Video Analytics Sensor Input Network Disconnect e File upload via FTP E Mail Alarm events e Notification via E Mail TCP e local storage SD SDHC recording at Network disconnected Ethernet RJ 45 10 1 00BASE 1 ideo Compression H 264 MPEG 4 Part 10 AVC Motion JPEG Format lt 3M Mode gt Network 2048x1536 1920x1080 1600x1200 1280x1024 1280x960 1280x720 1024x768 800x600 800x450 640x480 640x360 Resolution 320x240 320x180 lt 2M Mode gt 1920x1080 1280x1024 1280x960 1280x720 1024x768 800x600 800x450 640x480 640x360 320x240 320x180 English _125 aooendx Description Items SNB 7002 SND 7082 F SNV 7082 lt 3M Mode gt H 264 Max 20 fps at all resolutions MJPEG 800x600 320x180 20 fps 1024x768 1920x1080 15 fps Max Framerate 2048x1536 10 fps lt 2M Mode gt H 264 Max 30 fps at all resolutions MJPEG 800x600
15. if not write to the Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you by electronic and paper mail If the program is interactive make it output a short notice like this when it starts in an interactive mode Gnomovision version 69 Copyright C year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY for details type show w This is free software and you are welcome to redistribute it under certain conditions type show c for details The hypothetical commands show w and show c should show the appropriate parts of the General Public License Of course the commands you use may be called something other than show w and show c they could even be mouse clicks or menu items whatever suits your program You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the program if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the program Gnomovision which makes passes at compilers written by James Hacker signature of Ty Coon 1 April 1989 Ty Coon President of Vice This General Public License does not permit incorporating your program into proprietary programs If your program is a subroutine library you may consider it more useful to permit linking proprietary appli
16. lt Samsung DDNS gt 2 Provide the lt Product ID gt that you registered product ID with the DDNS site 3 Click Apply HEE When the connection is successfully made you will see the message of lt Success gt on the screen N3JJY0S dNLIJS Configuring public DDNS in Camera Settings 1 Open the DDNS settings page and select lt Public DDNS gt for lt DDNS gt 2 Enter the corresponding site s host name user name and password 3 Click Apply EEE button If the connection properly establishes lt Success gt appears 4 When done click Apply EEG I 4 To use DDNS service properly both DDNS setup and the router s port forwarding setup are required For port forwarding setup refer to Port Range Forward Port Mapping Setup page 60 English _95 Setup screen IP filtering You can create a list of IPs that you want to grant or deny access to them 1 From the Setup menu select the lt Network IF gt tab 2 Click lt IP filtering gt 3 Select lt Filtering type gt e Deny If selecting this access from those IPs that are added to the filtering will be restricted e Allow If selecting this access from only those IPs that are added to the filtering will be accepted 4 Click the Add EAE button The IP list will be created 5 Provide the IP that you want to grant or deny access from When you enter an IP address and a Prefix the list of IP addr
17. which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact If Contributor obtains such knowledge after the Modification is made available as described in Section 3 2 Contributor shall promptly modify the LEGAL file in all copies Contributor makes available thereafter and shall take other steps Such as notifying appropriate mailing lists or newsgroups reasonably calculated to inform those who received the Covered Code that new knowledge has been obtained b Contributor APIs If Contributor s Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API Contributor must also include this information in the LEGAL file c Representations Contributor represents that except as disclosed pursuant to Section 3 4 a above Contributor believes that Contributor s Modifications are Contributor s original creation s and or Contributor has sufficient rights to grant the rights conveyed by this License 3 5 Required Notices You must duplicate the notice in Exhibit Ain each file of the Source Code If it is not possible to put such notice in a particular Source Code file due to its structure then You must include such notice in a location such as a relevant directory where a user would be likely to look for such a notice If You created one or more Modification s You may add
18. 4 For registering the DDNS settings refer to Registering with DDNS page 94 For configuring the DDNS settings refer to DDNS page 93 For setting the network type refer to Interface page 91 English _51 network connection and setup CONNECTING THE CAMERA DIRECTLY TO A PPPoE MODEM SAMSUNG Camera External Remote PC DDNS Server Data Center KOREA 1 Use the cross LAN cable to connect the network cable directly to your PC N Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet Use the Internet browser to connect to the web viewer Move to Setup page Move to Network DDNS and configure the DDNS settings Move to Network Interface and set the network type to PPPoE Connect the camera which was removed from your PC directly to the modem O N DO OO FB OW Restart the camera 4 For registering the DDNS settings refer to Registering with DDNS page 94 For configuring the DDNS settings refer to DDNS page 93 For setting the network type refer to Interface page 91 52 network connection and setup CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE CABLE MODEM This is for a small network environment such as homes SOHO and ordinary shops SAMSUNG PPPoE or 7 Cable Modem S External Remote PC PPPoE
19. 9 0 or higher Chrome 15 0 or higher Safari 5 1 or higher Central Management ne Safaris NET i viewer PoE 35 C 55 C 40 F 131 F 90 RH DC12V 10 C 55 C 14 F Operating Temperature 10 C 55 C 414 F 131 F 131 P 20 Humidity 20 80 RH 80 RH Environmental Heater works at PoE power input After Start up working at 40 by PoE Ingress Protection IP66 Grade Vandal Resistance IK10 English _127 aooendlx Description Items SNB 7002 SND 7082 F SNV 7082 Input Voltage DC 12V PoE IEEE802 3af Max 9 0W DC 12V PoE class3 Heater Electrical Off Power Consumption Max 9 0W DC 12V PoE class3 Max 12 95W PoE class3 Heater On Color Material pody DAIR TAYY Body Ivory Plastic ae oy Aluminum Aluminum SND 7082 0133 0 x Mechanical Dimension Mey sel He D150 5 5 93 SND 7082F H134 5mm excluding projections 2199 9 x H125 0mm Flush Mounting Type SND 7082 635g Weight 2009 SND 7082F 700g 14709 128_ appendix PRODUCT OVERVIEW SNB 7002 60 0 2 36 72 0 2 83 Unit mm inch 150 5 5 93 English _129 XIGNAddV aooendix SND 7082 Unit mm inch MEd LON 00 3008 ORLSETE 20 XH N NOLLNYD N 4 O133 5 24
20. A L N A 3 6 st O D 7 Pa gt oe LA 100 4 3 95 130_ appendix SND 7082F Unit mm inch XIGNAddV 2159 9 6 3 122 5 4 82 P o E E 100 3 94 eii foe Q o N Y A A Taal LO 2 cS t9 O a TIA i Q gt A N 3c Q Q N t9 LO N y y English _131 appendix SNV 7082 Unit mm inch 34 5 1 36 46 1 81 85 3 35 Y S 83 5 3 29 85 3 35 160 6 3 A 5 Te t i Z S NS 7 J d a ee te 2100 3 94 132_ appendix TROUBLESHOOTING PROBLEM can t access the camera from a web browser SOLUTION Check to make sure that the camera s Network settings are appropriate Check to make sure that all network cables have been connected properly If connected using DHCP verify that the camera is able to acquire dynamic IP addresses without any problem If the camera is connected to a Broadband Router verify that port forwarding is properly configured Viewer got disconnected during monitoring cannot connect to the system using a tab browser of Internet Explorer 7 0 The camera connected to the network is not detected in the IP installer program Connected Viewers become disconnected upon any change to camera or network configurations C
21. Auto Setting dialog appears The lt IP Address gt lt Subnet Mask gt and lt Gateway gt will be set automatically 3 Enter the password Auto Setting Enter the password of admin account Network naman s which was used to access the camera Adds CQ The default password is 4321 Subnet Mask Gateway m The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product Note that the security and other related issues caused by the unchanged password shall be responsible for the user F IP Setting Password m f you want to change the password refer to Administrator password change of the user setup page 118 4 Click OK Auto network setup will be completed 58_ network connection and setup DYNAMIC IP SETUP Dynamic IP Environment Setup e Example of the Dynamic IP environment Ifa Broadband Router with cameras connected is assigned an IP address by the DHCP server If connecting the camera directly to modem using the DHCP protocols If IPs are assigned by the internal DHCP server via the LAN Checking the Dynamic IP 1 Run the IP Installer on the user s local computer Cameras allocated with lt Dynamic IP gt address are shown in the list 2 Select a camera from the search result 3 Click the Manual Set button and check the camera s lt Dynamic IP gt address If you u
22. DAMAGE The MIT License Some software components of this product incorporate source code covered under the MIT license as follows MIT License 2 0 Acewidget bettermeans jquery ui libxml libxml2 Mesa3D MesaLib mwEmbed OpenGL Samples Pack Wide Studio xorg server Copyright c 2011 The Dojo Foundation Copyright 2010 AUTHORS txt http queryui com about Dual licensed under the MIT or GPL Version 2 licenses http query org license http docs jquery com UI Widget Copyright Daniel Veillard Copyright Igor Zlatovic lt igor zlatkovic com gt Copyright Aleksey Sanin Copyright Gary Pennington lt Gary Pennington uk sun com gt Copyright Alfred Mickautsch lt alfred mickautsch de gt Copyright Bjorn Reese lt bjorn reese systematic dk gt Copyright Joel W Reed Copyright William Brack lt worack mmm com hk gt Copyright c 2007 2010 The Khronos Group Inc Copyright Atish Kumar Patra Permission is hereby granted free of charge to any person obtaining a copy of this software and associated documentation files the Software to deal in the Software without restriction including without limitation the rights to use copy modify merge publish distribute sublicense and or sell copies of the Software and to permit persons to whom the Software is furnished to do so subject to the following conditions The above copyright notice and this permission notice shall be included in all copies or substantial portion
23. Except network parameter Reset the other settings except for Network settings All Resets all settings including the camera settings however the log information will not be reset The IP addressing system will be defaulted to DHCP if you reset the camera If no DHCP server is found the previous settings will be restored automatically e Configuration backup amp Restore Backs up the current system settings before performing the restoration process The system is automatically restarts after backup or restoration e Restart Restarts the system To perform the upgrade Click Upgrade Click Browse and specify a file to Click Send The Upgrade dialog appears where Once completed upgrading the upgrade the progression will be shown in the Reiner iair seco Denrinadess wir phd bottom Upgredng mas sterbed Keitel upaj birui wa uoemjei Appiratien Jiading eas susceedes browser exits and the camera restarts English _119 N3aYOS dNLAS Setup screen 4 m t may take a max of 20 minutes for the upgrade process If you forcibly terminate the upgrade process upgrade will not be completed properly During restarting the system accessing with web viewer will not be made You can download the latest version from the Samsung web site www samsungcctv com To back up the current settings 1 Click Backup The Save As dialog should appear 2 Specify t
24. Framerate or Compression e GOV length Select a GOV length between 1 and 15 e Profile You can select the H 264 profiling method e Entropy coding Reduce the possible compression loss due to encoding e Smart codec Specify the use of Smart codec 4 The Smart Codec will be active only if the codec is of H 264 and the compression system is CBR e Multicast SVNP Specify the use of the SVNP protocol IP address Enter an IPv4 address with which you can connect to the IPv4 network Port Specify the video communication port TTL Set the TTL for the SVNP packet e Multicast RTP Specify the use of the RTP protocol IP address Enter an IPv4 address with which you can connect to the IPv4 network Port Specify the video communication port TTL You can set the TTL for the RTP packet English _77 Setup Screen What is GOV length GOV Group of Video object planes is a set of video frames for H 264 compression indicating a collection of frames from the initial Frame key frame to the next I Frame GOV consists of 2 kinds of frames Frame and P Frame Frame is the basic frame for the compression also Known as Key Frame which contains one complete image data P Frame contains only the data that has changed from the preceding l Frame You can specify a value between 1 and 15 for the H 264 CODEC Video setup 1 From the Setup menu select the lt Video amp Audio EJ gt tab
25. GPL to prohibit the practice for those products If such problems arise substantially in other domains we stand ready to extend this provision to those domains in future versions of the GPL as needed to protect the freedom of users Finally every program is threatened constantly by software patents States should not allow patents to restrict development and use of software on general purpose omputers but in those that do we wish to avoid the special anger that patents applied to a free program could make it ffectively proprietary To prevent this the GPL assures that atents cannot be used to render the program non free he precise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS 0 Definitions This License refers to version 3 of the GNU General Public License Copyright also means copyright like laws that apply to other kinds of works such as semiconductor masks The Program refers to any copyrightable work licensed under this License Each licensee is addressed as you Licensees and recipients may be individuals or organizations To modify a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission other than the making of an exact copy The resulting work is called a modified version of the earlier work or a work based on the earlier work A covered work means either the unmodif
26. IN NO EVENT SHALL CMU OR THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM THE LOSS OF USE DATA OR PROFITS WHETHER IN AN ACTION OF CONTRACT NEGLIGENCE OR OTHER TORTIOUS ACTION ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE Part 2 Networks Associates Technology Inc copyright notice BSD Copyright c 2001 2008 Networks Associates Technology Inc All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met yy Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer yy Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution yy Neither the name of the Networks Associates Technology Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL
27. If identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Program In addition mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may copy and distribute the Program or a work based on it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or b Accompany it w
28. N Ratio 50dB CVBS 1 0 Vp p 750 composite Video Out DIP Connector CVBS 1 0 Vp p 750 composite type 704x480 N 704x480 N 704x576 P for installation 704x576 P for installation Focal Length Zoom Ratio 3 8 5mm 2 8X Motorized Vari focal Max Aperture Ratio F1 2 l H 87 3 Wide 31 2 Tele Angular Field of View V 64 5 Wide 23 4 Tele Lens Min Object Distance 0 5 m Focus Control Zoom Movement Speed Manual Simple focus Day amp Night Lens Type Mount Type Manual DC Auto Iris DC Auto Iris C CS Board in type English _123 aooendlx ee Description SNB 7002 SND 7082 F SNV 7082 Pan Range z 0 355 Pan Speed Tilt Range 0 90 Pan Titt Tilt Speed Rotate Rotate Range 0 355 Preset Preset Accuracy Auto Tracking Camera Title Off On Displayed up to 15 characters Day amp Night Auto ICR Color BAW External Backlight Compensation Off BLC HLC Off On 96dB 3M Mode 20fps 2M Mode 30fps Wide Dynamic Range Operational Contrast Enhancement SSDR Samsung Super Dynamic Range Off On Digital Noise Reduction SSNRIII 2D 3D Noise Filter Off On Digital Image Stabilization Motion Detection Off On 4 Rectangular zones Privacy Masking Off On 1ea 4 Point Polygonal 16ea Rectangular zones 124 appendix Description Items SNB 7002 SND 7082 F SNV 7082
29. OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE The licence and distribution terms for any publically available version or derivative of this code cannot be changed i e this code cannot simply be copied and put under another distribution licence including the GNU Public Licence BSD License Some software components of this product incorporate source code covered under the BSD license as follows Component Name License URL net snmp 5 4 BSD lighttpd 1 4 25 BSD 2 0 Game ws BSD 2 0 MiniUPnP Project Client BSD 2 0 lighttpd is a secure fast compliant and very flexible webserver that has been optimized for high performance environments It has a very low memory footprint compared to other webservers and takes care of cpuload Its advanced feature set FastCGI CGI Auth Output Compression URL Rewriting and many more make lighttpd the perfect webserver software for every server that suffers load problems Simple Network Management Protocol SNMP is an Internetstandard protocol for managing devices on IP networks It is used mostly in network management systems to monitor the devices attached to the network for conditions that need administrative attention Net SNMP is a suite of applications used to implement SNMP v1 SNMP v2c and SNMP v3 using both IPv4 and IPv6 For more additional information send email to help cctv samsung com Copyright C 2004 Kneschke incremental All rights reserved
30. OF THE USE OR INABILITY TO USE THE LIBRARY INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library and you want it to be of the greatest possible use to the public we recommend making it free software that everyone can redistribute and change You can do so by permitting redistribution under these terms or alternatively under the terms of the ordinary General Public License To apply these terms attach the following notices to the library It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found one line to give the library s name and an idea of what it does Copyright C year name of author This library is free software you can redistribute it and or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation either version 2 1 of the License or at your option any later version This library is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the im
31. SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Copyright c 1991 1993 The Regents of the University of California All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of the Regents of the University of California nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR C
32. Therefore we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license Most GNU software including some libraries is covered by the ordinary GNU General Public License This license the GNU Lesser General Public License applies to certain designated libraries and is quite different from the ordinary General Public License We use this license for certain libraries in order to permit linking those libraries into non free programs When a program is linked with a library whether statically or using a shared library the combination of the two is legally speaking a combined work a derivative of the original library The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom The Lesser General Public License permits more lax criteria for linking other code with the library We call this license the Lesser General Public License because it does Less to protect the user s freedom than the ordinary General Public License It also provides other free software developers Less of an advantage over competing non free programs These disadvantages are the reason we use the ordinary General Public License for many libraries However the Lesser license provides advantages in certain special circumstances For example on rare occasions there may be a special need to encourage the widest
33. a single transaction or arrangement you convey or propagate by procuring conveyance of a covered work and grant a patent license to some of the parties receiving the covered work authorizing them to use propagate modify or convey a specific copy of the covered work then the patent license you grant is automatically extended to all recipients of the covered work and works based on it A patent license is discriminatory if it does not include within the scope of its coverage prohibits the exercise of or is conditioned on the non exercise of one or more of the rights that are specifically granted under this License You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software under which you make payment to the third party based on the extent of your activity of conveying the work and under which the third party grants to any of the parties who would receive the covered work from you a discriminatory patent license a in connection with copies of the covered work conveyedby you or copies made from those copies or b primarily for and in connection with specific products or compilations that contain the covered work unless you entered into that arrangement or that patent license was granted prior to 28 March 2007 Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may ot
34. a desired direction by referring to the Adjusting the monitoring direction for the camera section page 38 6 Close the top cover To ensure waterproofing tight up the fixing bolts using the L wrench Optional Accessories for Installation For your easier installation you can purchase appropriate optional accessories available 1 WALL MOUNT ADAPTOR SBP 300WM or SBP 300WM1 HANGING MOUNT SBP 300HM3 This adaptor is used when installing the dome camera onto a wall 36_ installation amp connection 2 CEILING MOUNT ADAPTOR SBP 300CM HANGING MOUNT SBP 300HM3 This adaptor is used when installing the dome camera on a concrete ceiling 3 POLE MOUNT ADAPTOR SBP 300PM This is an adaptor for WALL MOUNT ADAPTOR SBP 300WM or SBP 300WM1 installation on a pole whose diameter is bigger than 80mm 4 CORNER MOUNT ADAPTOR SBP 300KM This is an adaptor for WALL MOUNT ADAPTOR SBP 300WM or SBP 300WM1 installation on the corner of wall joint NOILOANNODO 8 NOILLVTIVLSNI English _37 Installation amp connection Adjusting the monitoring direction for the camera SND 7082 SND 7082F SNV 7082 Cover front Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling Where rotating the camera unit to the left or right is called Pan adjusting the tilt is called Tilt and turning the len
35. by their nature must remain in effect beyond the termination of this License shall survive 8 2 If You initiate litigation by asserting a patent infringement claim excluding declatory judgment actions against Initial Developer or a Contributor the Initial Developer or Contributor against whom You file such action is referred to as Participant alleging that a such Participant s Contributor Version directly or indirectly infringes any patent then any and all rights granted by such Participant to You under Sections 2 1 and or 2 2 of this License shall upon 60 days notice from Participant terminate prospectively unless if within 60 days after receipt of notice You either i agree in writing to pay Participant a mutually agreeable reasonable royalty for Your past and future use of Modifications made by such Participant or ii withdraw Your litigation claim with respect to the Contributor Version against such Participant If within 60 days of notice a reasonable royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not withdrawn the rights granted by Participant to You under Sections 2 1 and or 2 2 automatically terminate at the expiration of the 60 day notice period specified above b any software hardware or device other than such Participant s Contributor Version directly or indirectly infringes any patent then any rights granted to You by such Participant u
36. cable to the corresponding power port of the camera K m f both PoE Power over Ethernet and DC 12V are supplied the product will operate with the first applied power source You can also use a router featuring PoE to supply power to the camera Use PoE that is compliant with the IEEE802 3af protocols tis advisable to use only one power source from PoE and DC12V The heater will operate properly only by the power source of PoE SNV 7082 NOILOANNODO 8 NOILLVTIVLSNI fusing DC 12V the heater will not operate at all Use PoE in a low temperature place of less than 10 C Be careful not to reverse the polarity when you connect the power cable m f you want to connect an external device you must turn off the external device before proceeding Electrical Resistance of Copper Wire at 20 C 68 F Copper Wire Gauge AWG 24 0 22mm 22 0 33mm 20 0 52mm 18 0 83mmz2 Resistance 0 m 0 078 0 050 0 030 0 018 Drop Voltage V m 0 028 0 018 0 011 0 006 Recommended Distance m Less than 20 Less than 30 Less than 30 Less than 30 As shown in the table above you may encounter a voltage sag depending on the wire length If you use an excessively long wire for camera connection the camera may not work properly Camera Operating Voltage DC 12V 10 Voltage drop measurements on the chart above may vary depending on the type and manufacture of the copper cable English _45 Instal
37. can set rules for events despite of the intelligent video analysis setting No signal is found at the Alarm Output port even when an intelligent video analysis event is generated e Check alarm output port settings Cannot record into the SD memory card SD memory card is inserted but the camera does not operate properly e Check if the memory card is defective e Check if the write protection tab of the memory card is set to LOCK e Check if the memory card is inserted in the proper direction Operation of memory card that is formatted by other devices is not guaranteed with this camera unit e Format the memory card again in lt Setup gt lt Event gt gt lt Storage gt menu Cannot format the SD memory card 134_ appendix e Check if the write protection tab of the memory card is set to LOCK Open Source Announcement GPL LGPL software license The software included in this product contains copyrighted software that is licensed under the GPL LGPL You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help cctv samsung com If you want to obtain the complete Corresponding Source code in the physical medium such as CD ROM the cost of physically performing source distribution might be charged e GPL S W Base Kernel Busybox Sysvinit dosfstools DSP SW package e LGPL S W gLibc In
38. codec setup gt 3 Set the image quality The ROI area will be displayed in the specified quality 4 Select a desired area with the mouse pointer and drag it as much as you want You can specify up to 5 distinct areas 5 To cancel all the settings for the area click the Clear button 6 When done click Apply BEEZ eu The Smart codec will not be active if itis set to lt Off gt in lt Video profile gt page 75 88_ setup screen Focus setup SNB 7002 You can adjust the focus of video image 1 From the Setup menu select the lt Video amp Audio EJ gt tab 2 Click lt Focus setup gt 3 Set the focus How to use the Simple Focus 1 Focus initialize Restores the focus adjustment to the default flange back position 2 Focus Adjust Lens Manually adjusts the Len s focus Far lt gt Near and ensure the image clear 3 Simple focus Click EJ button to fit the focus automatically N3aYOS dNLJS n The Simple focus mode may not fit correctly in the following cases Sudden change to the object in Simple focus mode Sudden movement appearance or disappearance Radical change to the brightness in Simple focus mode Image of a low contrast lf the camera is exposed to a strong light source in the front or surroundings Incase the focus is inappropriate apart from mentioned above use SEE EN EJ FT EE BT button to manually adjust the focus Ina S
39. cover 1 j Camera Body 2 Loosen 3 screws on the camera body counter clockwise and push down the left right LOCKER lever in the arrow direction to nt release the lock Then remove y the camera from the case LOCKER Lever tz Ks M Sai SN 34_ installation amp connection Installing on the ceiling directly 1 Drill a hole diameter 5mm depth min 35mm in a Fit the bottom hole to the anchor hole and insert Connect and arrange the necessary cables lest that Install the camera body in the reverse order of Remove the top cover from the case by referring to the Disassembling section page 34 desired position of the case bottom and insert the provided plastic anchor HUD 5 to the end and fix the ASSY taping screw TH M4xL30 When assembling the camera case to a junction box select appropriate screw holes on the case bottom for installation they should be damaged or twisted while installing the camera E CAMERA FRONT NOILOJNNOO 8 NOLLVTIVLSNI Disassembling page 34 Adjust the lens in a desired direction by referring to the Adjusting the monitoring direction for the camera section page 38 Close the top cover To ensure waterproofing tight up the fixing bolts using the L wrench Ceiling mount 1 Use the provided template to drill one hole for Connect and arrange the necessary cables Remove
40. d Notwithstanding Section 2 2 b above no patent license is granted 1 for any code that Contributor has deleted from the Contributor Version 2 separate from the Contributor Version 3 for infringements caused by i third party modifications of Contributor Version or ii the combination of Modifications made by that Contributor with other software except as part of the Contributor Version or other devices or 4 under Patent Claims infringed by Covered Code in the absence of Modifications made by that Contributor 3 Distribution Obligations 3 1 Application of License The Modifications which You create or to which You contribute are governed by the terms of this License including without limitation Section 2 2 The Source Code version of Covered Code may be distributed only under the terms of this License or a future version of this License released under Section 6 1 and You must include a copy of this License with every copy of the Source Code You distribute You may not offer or impose any terms on any Source Code version that alters or restricts the applicable version of this License or the recipients rights hereunder However You may include an additional document offering the additional rights described in Section 3 5 3 2 Availability of Source Code Any Modification which You create or to which You contribute must be made available in Source Code form under the terms of this License either on the same media as an Execu
41. disclaimer yy Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution yy Neither the name of Cisco Inc Beijing University of Posts and Telecommunications nor the names of their contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Part 7 Fabasoft R amp D Software GmbH amp Co KG copyright notice BSD Copyright c Fabasoft R amp D Software GmbH amp Co KG 20080ss fabasoft com Author Bernhard Penz Redistribution and use in source and binary forms with or withou
42. e Audio In Sets whether to use audio for video recordings 7 According to your situation set ATC Auto Transmit Control mode e ATC mode It adjusts the video properties according to the variance in the network bandwidth controlling the bit rate Adjusting the bit rate depends on the ATC mode Control framerate Reduce the frame rate if the network bandwidth drops down Control compression Control the compression rate if the network bandwidth drops down Compression adjustment can cause deterioration of the image quality f lt Bitrate control gt is set to lt CBR gt the encoding priority according to the ATC mode will be fixed as below Bitrate control ATC mode Control framerate Control compression CBR Framerate Compression e ATC sensitivity Affect the transfer rate according to the variance in the network bandwidth The transfer rate will be adjusted to the fastest if the bandwidth is lt Very high gt and adjusted to the latest if the bandwidth is lt Very low gt e ATC limit If the quality or frame rate is adjusted the property will be changed to the applied value against the previous setting value 100 Note that if you reduce the property value too much you may encounter flickering on the screen So it is advisable to adjust the value within the threshold m tis recommended to apply ATC control only for cameras supporting ATC Set the ATC sensitivity to lt Very low gt in a network
43. e SSNR Specify the use of noise reduction e SSNR3 level Adjust the noise reduction level e Sens up mode Automatically senses the darkness level at night or in a low contrast scene and extends the accumulation time accordingly for a bright and sharp image m f you set the shutter mode to Manual A FLK SENS UP mode will be deactivated The greater the Sens Up factor is the brighter the screen becomes but it may result in an afterimage or video delay e Sens up limit Set the work condition to Auto mode in a low contrast scene e Lens Select to set the lens mode of the camera to Manual or Auto DC Auto Select this if you use the DC lens Only the iris is adjusted automatically but the focus is not controlled automatically Manual Select this if you use a lens on which you adjust the iris and focus manually e AGC mode Select AGC Control mode Adjust the gain value of the video that in particular was recorded at a low contrast scene and had a lower brightness level than normal to control the video brightness Exposure Setup SND 7082 SND 7082F SNV 7082 You can adjust the exposure level of the camera 1 Select lt Exposure gt 2 Select each item and set it properly e Brightness Adjust the screen brightness e Shutter mode Adjust the electronic shutter of the camera ESC Electronic shutter control Adjust the shutter speed automatically according to the ambient brightness m This will be a
44. environment with high variance in the network bandwidth m f the network connection is unstable you may encounter flickering on the screen 8 When done click Apply 76_ setup screen To add a video profile You can add as many codecs as necessary so that a variety of profiles can be applied according to the recording condition Select one from the lt Video profile gt options Provide the name and select a codec Specify the conditions under which the codec will be applied A O N Specify the details of the selected codec including resolution and frame rate Click lt Advanced gt to display the context menu e Resolution Set the video size of the H 264 and MJPEG files e Framerate Specify the frame rate e Compression Specify the compression rate of the video e Maximum bitrate Specify the maximum bit rate of the video N3JJY0S dNLAS m As the bit rate can be adjusted limitedly according to the resolution frame rate and screen complexity the actual bit rate can be greater than the maximum bit rate So you must consider the use conditions when setting the value e Bitrate control You can select one from constant bit rate and variable bit rate for compression Constant bit rate CBR varies the video quality and fixes network transfer bit rate while variable bit rate emphasizes the quality by varying network transfer bit rate e Encoding priority You can set the video transfer method to
45. has been made If you convey an object code work under this section in or with or specifically for use in a User Product and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term regardless of how the transaction is characterized the Corresponding Source conveyed under this section must be accompanied by the Installation Information But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product for example the work has been installed in ROM The requirement to provide Installation Information does not include a requirement to continue to provide support service warranty or updates for a work that has been modified or installed by the recipient or for the User Product in which it has been modified or installed Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network Corresponding Source conveyed and Installation Information provided in accord with this section must be in a format that is publicly documented and with an implementation available to the public in source code form and must require no special password or key for unpacking reading or copying 7 Additional Terms Addition
46. in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 12 13 14 If the distribution and or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License The Free Software Foundation may publish revised and or new versions of the Lesser General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Library specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Library does not specify a license version number you may choose any version ever p
47. of the current image t m The white balancing may not work properly in the following conditions If this is the case switch to AWC mode If the surrounding condition of the object is out of the temperature correction range ex Clear sky sunset If the surrounding of the object is dark If the focus of the camera directly faces the florescent lighting or if the camera is installed in a place of variable illumination the white balancing operation may be unstable English 81 Setup screen BLC Setup You can specify a desired area on the video manually and set the area to be displayed more clearly 1 Select lt Backlight gt 2 Set lt Mode gt to lt BLC gt 3 Set lt BLC level gt You can change the level to adjust the brightness of the monitoring area 4 Set the lt Top Bottom Left Right gt levels to specify the target area HLC Highlight Compensation Setup When a strong light such as streetlamp or headlight faces forward to the camera you can mask that exposed area in order to protect it from being saturated 1 Select lt Backlight gt 2 Set lt Mode gt to lt HLC gt 3 Set the lt HLC level gt and the lt Mask tone gt e HLC level Adjust the brightness level so as to remove the incoming highlight from a specific condition e Mask tone Adjust the mask tone of the highlighted area D i f i T bi E 4 m At night operation this function will be activated only if the in
48. of this License d Notwithstanding Section 2 1 b above no patent license is granted 1 for code that You delete from the Original Code 2 separate from the Original Code or 3 for infringements caused by i the modification of the Original Code or ii the combination of the Original Code with other software or devices 2 2 Contributor Grant Subject to third party intellectual property claims each Contributor hereby grants You a world wide royalty free non exclusive license a under intellectual property rights other than patent or trademark Licensable by Contributor to use reproduce modify display perform sublicense and distribute the Modifications created by such Contributor or portions thereof either on an unmodified basis with other Modifications as Covered Code and or as part of a Larger Work and b under Patent Claims infringed by the making using or selling of Modifications made by that Contributor either alone and or in combination with its Contributor Version or portions of such combination to make use sell offer for sale have made and or otherwise dispose of 1 Modifications made by that Contributor or portions thereof and 2 the combination of Modifications made by that Contributor with its Contributor Version or portions of such combination c the licenses granted in Sections 2 2 a and 2 2 b are effective on the date Contributor first makes Commercial Use of the Covered Code
49. possible use of a certain library so that it becomes a de facto standard To achieve this nonfree programs must be allowed to use the library A more frequent case is that a free library does the same job as widely used non free libraries In this case there is little to gain by limiting the free library to free software only so we use the Lesser General Public License In other cases permission to use a particular library in nonfree programs enables a greater number of people to use a large body of free software For example permission to use the GNU C Library in non free programs enables many more people to use the whole GNU operating system as well as its variant the GNU Linux operating system Although the Lesser General Public License is Less protective of the users freedom it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library The precise terms and conditions for copying distribution and modification follow Pay close attention to the difference between a work based on the library and a work that uses the library The former contains code derived from the library whereas the latter must be combined with the library in order to run TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License Agreement applies to any software library or other program which contains a notic
50. reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 8 If the distribution and or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 9 The Free Software Foundation may publish revised and or new versions of the General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this License you may choose any version ever published by the Free
51. separate and independent works which are not by their nature extensions of the covered work and which are not combined with it such as to form a larger program in or on a volume of a storage or distribution medium is called an aggregate if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation s users beyond what the individual works permit Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate 6 Conveying Non Source Forms You may convey a covered work in object code form under the terms of sections 4 and 5 provided that you also convey the machine readable Corresponding Source under the terms of this License in one of these ways a Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange b Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by a written offer valid for at least three years and valid for as long as you offer spare parts or customer support for that product model to give anyone who possesses the object code either 1 a copy of the Corresponding Source for all the software in the product that is covered by this License on a durable physical medium customar
52. small inline functions ten lines or less in length then the use of the object file is unrestricted regardless of whether it is legally a derivative work Executables containing this object code plus portions of the Library will still fall under Section 6 Otherwise if the work is a derivative of the Library you may distribute the object code for the work under the terms of Section 6 Any executables containing that work also fall under Section 6 whether or not they are linked directly with the Library itself 6 As an exception to the Sections above you may also combine or link a work that uses the Library with the Library to produce a work containing portions of the Library and distribute that work under terms of your choice provided that the terms permit modification of the work for the customer s own use and reverse engineering for debugging such modifications You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License You must supply a copy of this License If the work during execution displays copyright notices you must include the copyright notice for the Library among them as well as a reference directing the user to the copy of this License Also you must do one of these things a Accompany the work with the complete corresponding machine readable source code for the Library including whatever changes were used in the work
53. the Setup menu select the lt Network IE gt tab 2 Click lt SNMP gt 3 Specify the lt SNMP gt e Enable SNMP v1 SNMP version 1 will be active e Enable SNMP v2c SNMP version 2 will be active Read community Provide the name of the read community where you can access to the SNMP information The default name is lt public gt Write community Provide the name of the write community where you can access to the SNMP information The default name is lt write gt English _99 Setup screen e Enable SNMP v3 SNMP version 3 will be active Password Specify the default password for SNMP version 3 The default password is lt admin4321 gt The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product Note that the security and other related issues caused by the unchanged password shall be responsible for the user Password should be longer than 8 characters no more than 16 characters 4 When done click Apply BEEZ I AW SNMP v3 is only able to be set when the secure connection mode is HTTPS Refer to SSL page 97 EVENT SETUP FTP E mail You can configure the FTP E mail server settings so that you can transfer the images taken with camera to your PC if an event occurs 1 From the Setup menu select the lt Event F gt tab 2 Click lt FTP E mail gt 3 Select lt FTP configuration gt or
54. the playback performance can be deteriorated depending on the system RECOMENDED SD SDHC MEMORY CARD SPECIFICATIONS e 4GB 32GB e t is recommended to use memory cards of at least class 6 speed 10_ overview WHAT S INCLUDED Please check if your camera and accessories are all included in the product package MAIAYSAO 1 panera SND 7082 or SND 7082F or pp _ 1 Instruction book Installer S W CD CMS S W DVD SNB 7002 Quick Guide SND 7082 Optional SND 7082F SNV 7082 Used to test the camera connection to a portable display device Cable for the testing monitor English _11 Overview Used to install the C Mount camera lens C Mount Adapter Auto Iris Lens Connector Used to install the camera Camera Holder Mount haider SNB 7002 Camera Holder Mount Screws Used to install the mount 6 position Terminal Block Used for alarm in out terminals SND 7082 5 position Terminal Block 1 Used for alarm in out terminals SND 7082F SNV 7082 7 SND 7082 Used for fixing to an iron plate SND 7082F al P Iron Screw Template Product installation guide SND 7082F SNV 7082 LAN cable gender Prevents dust Ingress into the SND 7082 wiring connection part Dustproof Plate A P ffi F P3 Jack Modular 12_ overview lt Q Tapping Screw 1 Used to fix the safety bracket SND 7082F Bracket Safety 1 Safety Bracket y Used for
55. the resolution to 640x480 Press it again to switch back to the default resolution Item Description 8 Full Screen Switch the current video to the maximum size of the monitor 9 Capture Saves the snapshot as an image file in the omp or jpg format z 10 Augio Mioropniong Enable disable audio and microphone and controls volume m Control 2 m 11 Alarm output Activate the Alarm Out port Bo Hide the context 12 i The left corner context menu will disappear but only the menu icon To capture the snapshot h Click Capture IEJ on the scene to capture The Capture dialog should appear 2 Confirm the save path and click Save button The screenshot will be saved in the specified path 4 m f you encounter an interrupted video when capturing the image with IE8 on a Windows 7 based PC deselect Turn On Protected Mode from Tools Internet Options Security To fit the full screen 1 Click the Full Screen button 2 This will fit the Viewer to the full screen 3 To exit the full screen mode press Esc on the keyboard D For the Internet Explorer and Google Chrome browser you can switch to the full screen English _71 web viewer To control the audio sound 1 Click Audio EJ icon to activate audio communication 2 Use H bar to control the volume To control microphone 1 Click Mic E icon to activate the microphone SEARC
56. user e Guest setup If you select lt Enable guest access gt the guest account can access the Web viewer screen but can only view the live Viewer screen The ID password for the guest account is lt guest guest gt which cannot be changed e Authentication setup If you select lt Enable RTSP connection without authentication gt you can access RTSP without logging in and view the video e Current users If you select lt Use gt you can set or change the user permissions The administrator can set the audio input audio output and alarm output permissions Profile If you select lt Default gt you can only see the default profile video if selecting lt All gt you can see the full profile videos w ONVIF functions available to a registered user allowed to use ONVIF functions are limited to those of granted with permission Video Transfer and Changing Video Information Set the profile to lt All gt and set Audio Input and Audio Output Video Transfer Changing Video Information Alarm Output Set the profile to lt All gt and select at your preference for the rest 4 When done click Apply 118_ setup screen Upgrade Reboot 1 Click lt Upgrade Reboot gt Select a desired item and set it From the Setup menu select the lt System EJ gt tab appropriately e Upgrade Performs upgrading the system e Factory default Resets the system to the factory default
57. which must be distributed under Sections 1 and 2 above and if the work is an executable linked with the Library with the complete machine readable work that uses the Library as object code and or source code so that the user can modify the Library and then relink to produce a modified executable containing the modified Library It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions b Use a suitable shared library mechanism for linking withthe Library A suitable mechanism is one that 1 uses at run time a copy of the library already present on the user s computer system rather than copying library functions into the executable and 2 will operate properly with a modified version of the library if the user installs one as long as the modified version is interface compatible with the version that the work was made with c Accompany the work with a written offer valid for at least three years to give the same user the materials specified in Subsection 6a above for a charge no more than the cost of performing this distribution d If distribution of the work is made by offering access to copy from a designated place offer equivalent access to copy the above specified materials from the same place e Verify that the user has already received a copy of these materials or that you have alre
58. 320x180 30 fps 1024x768 1920x1080 15 fps Smart Codec Yes Area Based Method H 264 Compression Level Target Bitrate Level Control Video Quality Adjustment MJPEG Quality Level Control H 264 CBR or VBR Bitrate Control Method MJPEG VBR Network Streaming Capability Multiple Streaming Up to 6 Profiles Audio 1 0 Parma Wie Une M External Mic Line in Line out Line out Built in Mic ee 6 711 law 6 726 16Kbps 24Kbps 32Kbps 40Kbps Audio Communication Bi directional IP IPv4 IPv6 TCP IP UDP IP RTP UDP RTP TCP RTSP NTP HTTP HTTPS Protocol SSL DHCP PPPoE FTP SMTP ICMP IGMP SNMPv1 v2c V3 MIB 2 ARP DNS DDNS QoS UPnP RTCP HTTPS SSL Login Authentication Digest Login Authentication Security IP Address Filtering User access Log 802 1x Authentication 126_ appendix Description Items SNB 7002 SND 7082 F SNV 7082 Streaming Method Unicast Multicast Max User Access 10 users at Unicast Mode gt Memory Slot SD SDHC Memory Slot m ONVIF Conformance Yes 5 English French German Spanish Italian Chinese Korean Russian A Wehnaoe Landuad Japanese Swedish Denish Portuguese Czech Polish Turkish Network pag guag Rumanian Serbian Dutch Croatian Hungarian Greek Norway Finland Supported OS Windows XP VISTA 7 MAC OS X 10 7 or Higher Web Viewer Supported Browser Internet Explorer 7 0 or Higher Firefox
59. 6 Set whether to use lt Detection result overlay gt Specified rules of virtual lines and areas are displayed on the monitoring page 7 When done click Apply 110_ setup screen To set the video analysis rules Passing 1 Set the event rule to lt Virtual line On the screen click on preferred Select the desired rule Set the type to lt Passing Entering Exiting gt based rules gt starting and ending point of the virtual line then a popup window appears NJJY0S dNLAS e Right Detects motions of moving from the left to the right over the virtual line e Left Detects motions of moving from the right to the left over the virtual line Click OK To remove a defined rule right click on the displayed virtual line to open popup context menu and select Delete button Entering Exiting T Set the event rule to lt Defined area On the screen click four vertices to Select the desired rule Set the type to lt Passing Entering Exiting gt based rules gt define detection area and a popup window appears e Entering Detects motions of moving object whose center point entering into the defined area from outside of the area e Exiting Detects motions of moving object whose center point exiting from the defined area from inside of the area to outside Click OK To remove a defined rule right click on the displayed side lines of the
60. A Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed This is the first released version of the Lesser GPL It also counts as the successor of the GNU Library Public License version 2 hence the version number 2 1 Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public Licenses are intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This license the Lesser General Public License applies to some specially designated software packages typically libraries of the Free Software Foundation and other authors who decide to use it You can use it too but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case based on the explanations below When we speak of free software we are referring to freedom of use not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software and use pieces of it in new free programs and that you are informed that you can do these things To protect your rights we need to make restrictions that forbid
61. AL file described in Section 3 4 and must be included with all distributions of the Source Code Except to the extent prohibited by statute or regulation such description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it 5 Application of this License This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered Code 6 Versions of the License 6 1 New Versions Netscape Communications Corporation Netscape may publish revised and or new versions of the License from time to time Each version will be given a distinguishing version number 6 2 Effect of New Versions Once Covered Code has been published under a particular version of the License You may always continue to use it under the terms of that version You may also choose to use such Covered Code under the terms of any subsequent version of the License published by Netscape No one other than Netscape has the right to modify the terms applicable to Covered Code created under this License 6 3 Derivative Works If You create or use a modified version of this License which you may only do in order to apply it to code which is not already Covered Code governed by this License You must a rename Your license so that the phrases Mozilla MOZILLAPL MOZPL Netscape MPL NPL or any confusingly similar phrase do not appear in your licens
62. AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Part 4 Sun Microsystems Inc copyright notice BSD Copyright c 2003 Sun Microsystems Inc 4150 Network Circle Santa Clara California 95054 U S A All rights reserved Use is subject to license terms below This distribution may include materials developed by third parties Sun Sun Microsystems the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems Inc in the U S and other countries Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met yy Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer yy Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution y
63. Apply power to Ext Mic If the external microphone connected has no separate power supply check this option to set camera to supply power to the connected external microphone The option is enabled if lt External microphone gt is selected English _79 Setup screen e Codec Sets the codec to be used G 711 A audio codec standard it uses 64 Kbps PCM Pulse Code Modulation encoding ITU standard audio codec that is adequate for digital voice transfer in PSTN network or through a PBX G 726 ITU standard audio codec applying ADPCM Adaptive Differential Pulse Code Modulation for variable bit rates of 40 32 24 16 Kops to 64 Kbps PCM encoding e Bitrate Set the bit rate to differentiate compression ratio if using G 726 codec e Gain Sets the input audio gain 4 Set the audio output level e Enable Sets whether to use audio output e Gain Sets the output audio gain 5 When done click Apply BEEZ Camera setup You can change the camera settings according to the environment where the camera is located 1 From the Setup menu select the lt Video amp Audio EJ gt tab 2 Click lt Camera setup gt 3 Configure the settings as necessary of SSDR White balance Backlight Exposure Special OSD Time OSD 4 When done click Apply m f a certain time timeout 240s is elapsed with your not pressing the Apply button after changing the settings your changes will not be ap
64. DHCP server in the network you must run the IP Installer program to change the basic network settings such as IP address Subnet mask Gateway etc before you can connect to the network 26_ overview N E l Item Lock Release Lever Lens Focus Adjustment Button SD Memory Card Compartment Release Lock MAIAYSAO Description Press the lt UNLOCK gt levers on both ends to separate camera module from the body Lens for the camera The button adjusts the focus of image automatically Compartment for the SD memory card If you want to remove the bracket from the main unit or remove the camera from the bracket push this out and turn the main unit in the lt UNLOCK gt direction English _27 Installation amp connection MOUNTING THE LENS SNB 7002 Disconnect the power before proceeding 4 The C lens and CS lens are not included in the product package It is recommended that megapixel lens are use on this camera to optimise performance Mounting the CS lens on a camera Turn the optional CS lens clockwise to insert it CS Lens Mounting the C lens on a camera Turn the C mount adaptor clockwise to insert it and do the same with the C lens C Lens 28_ installation amp connection Connecting the Auto Iris Lens connector Insert the lens connector into the corresponding hole of the camera NOILOANNODO 8 NOILLVTIVLSNI Focusing Turn the lens left or ri
65. H AND PLAY BY EVENT 1 Click the Playback button 2 Specify the start time and end time of your search 3 Select an event type for your search within the specified period 4 Click the Event search button The search results will be displayed in the list D m f more than 500 events are recorded within the search period your search will be limited up to the date when the 500th event is recorded For instance if the search period is between 10th and 15th day of the month and more than 500 events were recorded 10th through 11th your search will be limited up to 11th day with a total of 500 events and events after then from 12th will not be found 5 Select a data item to play in the search list 6 Click the Play If button 7 To stop playing the video click Stop EJ 8 To return to the search screen click Exit EJ 72_ web viewer SEARCH AND PLAY BY TIME 1 Click Time Search H 2 Click a desired date in the calendar The video on the specified date will be played 3 If the video playback is stopped select a time and click Play E The video on the selected time will be played YAMGIA GAM 4 While the video is being played the recording time for the current video will be shown 5 Search for the video forward or backward and control the play speed Tocontrol the play speed If selecting gt the button will switch to x1 x2 x4 x8 an
66. IJG is not affiliated with the official ISO JPEG standards committee LEGAL ISSUES In plain English 1 We don t promise that this software works But if you find any bugs please let us know 2 You can use this software for whatever you want You don t have to pay us 3 You may not pretend that you wrote this software If you use it in a program you must acknowledge somewhere in your documentation that you ve used the IJG code In legalese The authors make NO WARRANTY or representation either express or implied with respect to this software its quality accuracy merchantability or fitness for a particular purpose This software is provided AS IS and you its user assume the entire risk as to its quality and accuracy This software is copyright C 1991 1998 Thomas G Lane All Rights Reserved except as specified below Permission is hereby granted to use copy modify and distribute this software or portions thereof for any purpose without fee subject to these conditions 1 If any part of the source code for this software is distributed then this README file must be included with this copyright and no warranty notice unaltered and any additions deletions or changes to the original files must be clearly indicated in accompanying documentation 2 If only executable code is distributed then the accompanying documentation must state that this software is based in part on the work of the Inde
67. ING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program and you want it to be of the greatest possible use to the public the best way to achieve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to the program It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found one line to give the program s name and an idea of what it does Copyright C yyyy name of author This program is free software you can redistribute it and or modify it under the terms of the GNU General Public License as published by the Free Software Foundation either version 2 of the License or at your option any later version This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public License along with this program
68. N a y J J SD POWER FOCUS RESET 1 ALARMIN 4 2 ALARM OUT 5 Item Description 1 SD Memory Card Compartment 2 Audio terminal AUDIO IN Used to connect to a microphone ON A memory card is inserted and operates normally Flashing Failed to record insufficient space or inserted SD abnormally 3 SD Power Indicators OFF Camera is off camera is restarting memory card is not in place or when record is off Compartment for the SD memory card AUDIO OUT Used to connect to speakers ON While the power is on OFF If the power is off 16 overview Item Description The button restores all camera settings to the factory default Press and hold for about 5 seconds to reboot the system F If you reset the camera the network settings will be adjusted so that 4 Reset Button DHCP can be enabled If there is no DHCP server in the network you z must run the IP Installer program to change the basic network settings such as IP address Subnet mask Gateway etc before you can connect 2 to the network z 5 Focus Adjustment The button adjusts the focus of image automatically Button 6 Power Port Used to plug the power cable Lightning protective Used to discharge the lightning current safely outside in order to protect the grounding port camera 5 Network Port Used to connect the PoE or Ethernet cable for network connection ALARM IN Used to connect the alar
69. NFORMED OF THE POSSIBILITY OF SUCH DAMAGES THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU 10 U S GOVERNMENT END USERS The Covered Code is a commercial item as that term is defined in 48 C F R 2 101 Oct 1995 consisting of commercial computer software and commercial computer software documentation as such terms are used in 48 C F R 12 212 Sept 1995 Consistent with 48 C F R 12 212 and 48 C F R 227 7202 1 through 227 7202 4 June 1995 all U S Government End Users acquire Covered Code with only those rights set forth herein 11 MISCELLANEOUS This License represents the complete agreement concerning subject matter hereof If any provision of this License is held to be unenforceable such provision shall be reformed only to the extent necessary to make it enforceable This License shall be governed by California law provisions except to the extent applicable law if any provides otherwise excluding its conflict of law provisions With respect to disputes in which at least one party is a citizen of or an entity chartered or registered to do business in the United States of America any litigation relating to thi
70. NS1 and DNS2 PPPoE Specify the DNS1 DNS2 ID and Password f you set it to lt Manual gt you should specify the IP Subnet mask Gateway DNS 1 amp 2 manually e MAC address Shows the MAC address e P address Displays the current IP address e Subnet mask Displays the lt Subnet mask gt for the set IP e Gateway Displays the lt Gateway gt for the set IP NJJY0S dNLAS Set the lt IPv6 setup gt Set to lt Use gt to use IPv6 address e DNS1 DNS2 Displays the DNS Domain Name Service server address e Default Use the default IPv6 address e DHCP Display and use the IPv6 address obtained from the DHCP server e Manual Enter IP address and gateway manually and use it When done click Apply BEEZ t The IP addressing system will be defaulted to DHCP If no DHCP server is found the previous settings will be restored automatically Once completed with editing click Apply EEE to apply changes and the browser exits After a while connect again with the changed IP English _91 Setup screen Port 1 From the Setup menu select the lt Network J gt tab 2 Click lt Port gt 3 Type in each item in the Port menu as necessary Neither the port range between 0 and 1023 nor port 3702 is available HTTP port HTTP port used to access the camera via the web browser The default is 80 TCP Setting the HTTP port for Safari and Google Chrome browser
71. ONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Copyright c 2006 Creative Labs Inc All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of the Creative Labs nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL
72. PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 16 Limitation of Liability IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MODIFIES AND OR CONVEYS THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 17 Interpretation of Sections 15 and 16 lf the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee END OF TERMS AND CONDITIONS GNU LESSER GENERAL PUBLIC LICENSE Version 2 1 February 1999 Copyright C 1991 1999 Free Software Foundation Inc 51Franklin Street Fifth Floor Boston MA 02110 1301 US
73. RECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Various copyrights apply to this package listed in various separate parts below Please make sure that you read all the parts Part 1 CMU UCD copyright notice BSD like Copyright 1989 1991 1992 by Carnegie Mellon University Derivative Work 1996 1998 2000 Copyright 1996 1998 2000 The Regents of the University of California All Rights Reserved Permission to use copy modify and distribute this software and its documentation for any purpose and without fee is hereby granted provided that the above copyright notice appears in all copies and that both that copyright notice and this permission notice appear in supporting documentation and that the name of CMU and The Regents of the University of California not be used in advertising or publicity pertaining to distribution of the software without specific written permission CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
74. SE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This product includes cryptographic software written by Eric Young eay cryptsoft com This product includes software written by Tim Hudson tjh cryptsoft com Original SSLEAY License Copyright C 1995 1998 Eric Young eay cryptsoft com All rights reserved This package is an SSL implementation written by Eric Young eay cryptsoft com The implementation was written so as to conform with Netscapes SSL This library is free for commercial and non commercial use as long as the following conditions are aheared to The following conditions apply to all code found in this distribution be it the RC4 RSA lhash DES etc code not just the SSL code The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson tjn cryptsoft com Copyright remains Eric Young s and as such any Copyright notices in the code are not to be removed If this package is used in a product Eric Young should be given attribution as the author of the parts of the library used This can be in the form of a textual message at program startup or in documentation online or textual provided with the package Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the copyright notice this
75. Software Foundation 10 If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM ASIS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAMPROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 12 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BE
76. Web viewer plug in is installed properly you will see the live screen displayed AY EO AP TVLIW Wieden Inte reed lp Gu me Git v foie Took ln pret le Pcie WwORr CAMP SIP DAS TES Dae r Pesii p H Tim m a ip ea a Perg aha Weve i a erg en D Wiene Eapketer Seca ily Waning fo pam wat to non hin Arle one Fier atic fur hiidhe Geeeung betean iurre a piir Then Airi Eigi el er nm pay E l rem Pete Weal Gpadil eiy ani ff yma totter feb petty ehid io P athe preg oft we iia mat H biie ej h m aar Whati i English _69 agaMJI GAM web viewer USING THE LIVE SCREEN 1 JETA JG S 0 00 N ak os 2 3 4 CA AE ae C Moniiarimy i Playback Description Move to the monitoring screen Switch to the monitoring screen that plays recording data in the SD memory Move to the Setup screen Viewer Screen 8 N Displays the Live video on the screen You can use the mouse wheel to activate the digital zooming in Viewer screen You can select a profile type in lt Video profile gt under the lt Video amp Audio gt setup menu 70_ web viewer 5 Profile type a Lo E When the Web Viewer is connected the profile information currently using is displayed 6 ai The video size of the camera will switch to as big as the Web browser Ev itharesoluiion Regardless of the resolution setup configured in the camera it sets
77. Wilde Epia Secu Waren lt Run gt fhe yer gat bo run Chis nhl ere i perl Saeed 1 en Foie ye E moe enters en Wih Dir fiiin Cf Derre cii Beret a i fyi ofa bi Ar Pirra ye Saiar Ce ut midten n padari ou Eni Baim WT 4 The Silverlight Runtime installation page will be displayed lt Install now gt to Install Silverlight proceed with the installation r ee eee l wy Wen neha Silverlight English _65 web viewer 5 When done click lt Close gt Pu miy Nave t cla Pe Pa Wee pagi for Silverlight Cam To install on MAC OS 1 Run the file trailing with dmg Silverlight _De veloper dmg jJ 2 Run the install package file automatically created ending with pkg 3 Click lt Continue gt remis if the etaar com be eisai l isi jia eh emra a i h ian Aapan E MaL aeri Pe mis o a es ee iy ay bere LS Tamsin epee pre ee gad Po cpl Corel 66_ web viewer 4 Select your language on the language selection screen and click lt Continue gt ee eed be a p eera e eee ree khar mra SE A DAANA Sas ilal AA Gina j Bod Or E A a y Pease mai ee le ph ee ee ae a a ae Palla Ae He ee d ar Tee ee os iy some iej frickin leur a Weed nee Maury Hes pairi haiti Lancing AN M AAA AER bee aii aa pam re a a i eT mrig O hy Fe aer ripi ate ame aer Faja ieg F ro cook corm 5 Click lt Agree gt TEEN ee Fas apite jm he ia i mi iker galerie s
78. ady sent this user a copy For an executable the required form of the work that uses the Library must include any data and utility programs needed for reproducing the executable from it However as a special exception the materials to be distributed need not include anything that is normally distributed in either source or binary form with the major components compiler Kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system Such a contradiction means you cannot use both them and the Library together in an executable that you distribute N You may place library facilities that are a work based on the Library side by side in a single library together with other library facilities not covered by this License and distribute such a combined library provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted and provided that you do these two things a Accompany the combined library with a copy of the same work based on the Library uncombined with any other library facilities This must be distributed under the terms of the Sections above b Give prominent notice with the combined library of the fact that part of it is a work b
79. al permissions are terms that supplement the terms of this License by making exceptions from one or more of its conditions Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License to the extent that they are valid under applicable law If additional permissions apply only to part of the Program that part may be used separately under those permissions but the entire Program remains governed by this License without regard to the additional permissions When you convey a copy of a covered work you may at your option remove any additional permissions from that copy or from any part of it Additional permissions may be written to require their own removal in certain cases when you modify the work You may place additional permissions on material added by you to a covered work for which you have or can give appropriate copyright permission Notwithstanding any other provision of this License for material you add to a covered work you may if authorized by the copyright holders of that material supplement the terms of this License with terms a Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License or b Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it or c Prohibiting misrepresentation of
80. amera settings to the factory default Press and hold for about 5 seconds to reboot the system F If you reset the camera the network settings will be adjusted so that DHCP can be enabled If there is no DHCP server in the network you must run the IP Installer program to change the basic network settings such as IP address Subnet mask Gateway etc before you can connect to the network Output port for test monitoring the video output Use the test monitor cable to connect to a mobile display and check the test video The button adjusts the focus of image automatically Compartment for the SD memory card Press the lt UNLOCK gt levers on both ends to separate camera module from the body Used to install the camera on the wall or ceiling with the screws If you drill a hole in the wiring cover for wiring remove the cover and attach the provided dustproof plate to it and arrange the cables through the plate If you want to remove the bracket from the main unit or remove the camera from the bracket push this out and turn the main unit in the lt UNLOCK gt direction English _21 overview AT A GLANCE SND 7082F Appearance Item Top cover Camera Case Power Port Test Monitor Out Network Port Audio In Jack Audio Out Jack J 2 oy e le N 22 overview LN E or B o Description Case cover used to protect the lens and the main unit Housing part t
81. amsungipolis com Product ID the Login dialog should appear English _63 web viewer To check the DDNS address If the camera is connected directly to the DHCP cable modem DSL modem or PPPoE modem the IP address of your network will be changed each time you try to connect to the ISP Internet Service Provider server If this is the case you will not be informed of the IP address changed by DDNS Once you register a dynamic IP based device with the DDNS server you can easily check the changed IP when you try to access the device To register your device to the lt DDNS gt server visit www samsungipolis com and register your device first and then set the Web Viewer s lt Network gt lt DDNS gt to lt Samsung DDNS gt as well as providing lt Product ID gt that had been used for DDNS registration LOGIN Whenever you access the camera the login window appears Enter the User ID and password to access the camera 1 Enter admin in the lt User Name gt Connect to 192 168 1 100 input box The administrator ID admin is fixed EPN and can not be changed H 2 Enter 4321 in the lt Password gt Input The server 192 168 1 100 at iPolis requires a username and box password If the password is changed enter the changed password instead 3 Click OK If you have logged in successfully you will the Live Viewer screen User name amp v Password C Remem
82. applicable terms Additional terms permissive or non permissive may be stated in the form of a separately written license or stated as exceptions the above requirements apply either way 8 Termination You may not propagate or modify a covered work except as expressly provided under this License Any attempt otherwise to propagate or modify it is void and will automatically terminate your rights under this License including any patent licenses granted under the third paragraph of section 11 However if you cease all violation of this License then your license from a particular copyright holder is reinstated a provisionally unless and until the copyright holder explicitly and finally terminates your license and b permanently if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation Moreover your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you ofthe violation by some reasonable means this is the first time you have received notice of violation of this License for any work from that copyright holder and you cure the violation prior to 30 days after your receipt of the notice Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License If your rights have been terminated and not permanently reinstated you do not q
83. ar port box AUDIO OUT AUDIO IN a gt F SD POWER FOCUS RESET NETWORK 123456 EE 1 ALARMIN 4 2 ALARM OUT 5 3 GND 6 1 ALARMIN 4 2 ALARM OUT 5 6 3 GND e ALARM IN Used to connect the alarm input signal e ALARM OUT Used to connect the alarm output signal e GND Used for earth grounding 48 _ installation amp connection Connecting to the I O port box SND 7082 SND 7082F SNV 7082 Connect the Alarm I O cable to the corresponding port of the inner port box 1 ALARM IN 2 ALARM OUT 5 3 GND NOILOANNODO 8 NOLLVTIVLSNI e ALARM IN Used to connect the alarm input signal e ALARM OUT Used to connect the alarm output signal e GND Used for earth grounding To connect the external sensor Connect one strand of each signal line 2 strand of the sensors to the ALARM IN port and connect the other strand to the GND port Alarm I O Wiring Diagram ALARM IN K 5mA sink 3 3Vor5V 12VDC 20mA Max English _49 network connection and setup You can set up the network settings according to your network configurations CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1 Launch an Internet browser on the local PC 2 Enter the IP address of the camera in the address bar of the browser SAMSUNG Camera Firewall Ex
84. area to open popup context menu and select Delete button English _111 Setup screen Appearing Disappearing 1 Set the analysis type to lt Appearing Disappearing gt 2 Select the desired event rule e Defined area based rules It detects event of appearing object that appears in the area and remaining for a certain time period while not passing through the area borders and opposite case of disappearing of objects existed in the area On the screen click four vertices to define detection area Select the Appearing Disappearing from the popup e Entire area based rules It detects event of appearing object that appears in the entire screen and remaining for a certain time period and opposite case of disappearing of objects existed in the screen Right click on the screen to open the popup context menu and select Appearing Disappearing 3 Click OK 4 To remove a defined rule right click on the displayed side lines of the area or on the screen to open popup context menu and select Delete button 112_ setup screen Face detection You can set to detect recognized face and trigger an event accordingly 1 From the Setup menu select the lt Event F gt tab 2 Click lt Event setup gt 3 Select lt Face detection gt from lt Event action setup gt 4 Set whether or not to lt Enable gt N3JJY0S dNLAS 5 Select lt Sensitivity gt tab to set the sensitivity lev
85. as an argument passed when the facility is invoked then you must make a good faith effort to ensure that in the event an application does not supply such function or table the facility still operates and performs whatever part of its purpose remains meaningful For example a function in a library to compute square roots has a purpose that is entirely well defined independent of the application Therefore Subsection 2d requires that any application supplied function or table used by this function must be optional if the application does not supply it the square root function must still compute square roots These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Library and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Library the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the L
86. ased on the Library and explaining where to find the accompanying uncombined form of the same work 8 You may not copy modify sublicense link with or distribute the Library except as expressly provided under this License Any attempt otherwise to copy modify sublicense link with or distribute the Library is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 9 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Library or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Library or any work based on the Library you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Library or works based on it 10 Each time you redistribute the Library or any work based on the Library the recipient automatically receives a license from the original licensor to copy distribute link with or modify the Library subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by
87. ber my password 4 The default user ID is admin and the default password is 4321 For security purposes ensure that you change the password in lt System gt lt User gt The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product Note that the security and other related issues caused by the unchanged password shall be responsible for the user m f you check the Remember my password option when your input is done in future you will be logged in automatically without being prompted to enter the login information K You will experience the best video quality if the screen size is 100 Reducing the ratio may cut the image on the borders 64_ web viewer INSTALLING SILVERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer To install on Windows OS 1 Click lt Click Here gt YAMAIA GAM 2 When the file download dialog pops up click lt Run gt Vile Diwad Security Warning Do pou mahi bo rum ie cave thie fie E Him Sabina iph Appii T AN Fim IEE DEL ne Yethdls dhe lipen Hha bahema can ba upehal Hha le typa ppn D piderii Fm prr copra SUES e oia ae a eia moi fut i baam the idia What jamk 3 When the download is completed click
88. bit them from making any copies of your copyrighted material outside their relationship with you Conveying under any other circumstances is permitted solely under the conditions stated below Sublicensing is not allowed section 10 makes it unnecessary 3 Protecting Users Legal Rights From anti Circumvention Law No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996 or similar laws prohibiting or restricting circumvention of such measures When you convey a covered work you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work and you disclaim any intention to limit operation or modification of the work as a means of enforcing against the work s users your or third parties legal rights to forbid circumvention of technological measures 4 Conveying Verbatim Copies You may convey verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice keep intact all notices stating that this License and any non permissive terms added in accord with section 7 apply to the code keep intact all notices of the absence of any warranty and giv
89. by third parties to this License 7 lf as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Program at all For example if a patent license would not permit royaltyfree redistribution of the Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in
90. cations with the library If this is Lwihcaetn ysoeu want to do use the GNU Lesser General Public instead of this License GNU GENERAL PUBLIC LICENSE Version 3 29 June 2007 Copyright C 2007 Free Software Foundation Inc lt http fsf org gt Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The GNU General Public License is a free copyleft license for software and other kinds of works The licenses for most software and other practical works are designed to take away your freedom to share and change the works By contrast the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program to make sure it remains free software for all its users We the Free Software Foundation use the GNU General Public License for most of our software it applies also to any other work released this way by its authors You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for them if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to prevent others from den
91. cify up to 4 areas e Detection area Sets the entire screen as excluded from detection and adds specified area as motion detection area Use your mouse to drag to specify preferred area as the motion detection area e Non detection area Sets the entire screen as motion detection area and excludes specified area as not to be detected Use your mouse to drag to specify preferred area as the non detection area 5 To delete an area right click on the screen to open popup context menu and select Delete and OK button t All areas defined are deleted 6 When done click Apply BEEZ English _109 N3JJY0S dNLIJS Setup screen To use Video analytics It detects event that meets all conditions specified by sensitivity size and area and the event condition rules 1 Select the video analysis mode 2 Set lt Sensitivity gt lt Size gt and lt Area gt For further details on settings refer to To use Motion detection Page 108 109 3 Select lt Analytics gt tab 4 Select the video analysis type e Passing Entering Exiting Detects motions of passing entering into or exiting from a virtual line specified by the user e Appearing Disappearing Detects motions of appearing on or disappearing from the user defined area or the entire screen area 5 Set the video analysis rules For further details on settings refer to To set the video analysis rules page 111 112
92. coming highlight exceeds a certain area in a low contrast environment m At night HLC will not function if the scene is either too bright or too dark 82_ setup screen WDR Setup It displays a sharp image of the objects in a scene where both bright and dark areas exist 1 Select lt Backlight gt 2 Set lt Mode gt to lt WDR gt 3 Specify the lt WDR level gt a eae pama fee zat Wire fea Saliba ty a D m f applied with WDR noise may be found on the border between the brighter and darker areas jli aanaag NJJY0S dNLAS lt WDR OFF gt lt WDR ON gt Exposure Setup SNB 7002 You can adjust the exposure level of the camera 1 Select lt Exposure gt yy pe a 2 Select each item and set it properly e Brightness Adjust the screen brightness e Shutter mode Adjust the electronic shutter of the camera ESC Electronic shutter control Adjust the shutter speed automatically according to the ambient brightness This will be activated if lt Lens gt is set to lt Manual gt English _83 Setup Screen Manual Adjust the shutter speed of the camera manually You can select one between 1 30 and 1 12000sec in 2 mega mode and select one between 1 20 and 1 12000sec in 3 mega mode A FLK Anti flicker Select this feature if you encounter a flickering screen due to a frequency mismatch with the ambient lighting e Shutter speed Control the shutter soeed manually
93. counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code 4 You may not copy modify sublicense or distribute the Program except as expressly provided under this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 5 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Program or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Program or any work based on the Program you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Program or works based on it 6 Each time you redistribute the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy distribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance
94. ct code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code even though third parties are not compelled to copy the source along with the object code 5 A program that contains no derivative of any portion of the Library but is designed to work with the Library by being compiled or linked with it is called a work that uses the Library Such a work in isolation is not a derivative work of the Library and therefore falls outside the scope of this License However linking a work that uses the Library with the Library creates an executable that is a derivative of the Library because it contains portions of the Library rather than a work that uses the library The executable is therefore covered by this License Section 6 states terms for distribution of such executables When a work that uses the Library uses material from a header file that is part of the Library the object code for the work may be a derivative work of the Library even though the source code is not Whether this is true is especially significant if the work can be linked without the Library or if the work is itself a library The threshold for this to be true is not precisely defined by law If such an object file uses only numerical parameters data structure layouts and accessors and small macros and
95. ctivated if lt lris gt is set to lt Manual gt i a_l E J ey 84_ setup screen Manual Adjust the shutter speed of the camera manually You can select one between 1 30 and 1 12000sec in 2 mega mode and select one between 1 20 and 1 12000sec in 3 mega mode A FLK Anti flicker Select this feature if you encounter a flickering screen due to a frequency mismatch with the ambient lighting e Shutter speed Control the shutter speed manually e SSNR3 Specify the use of noise reduction e SSNR3 level Adjust the noise reduction level e Sens up mode Automatically senses the darkness level at night or in a low contrast scene and extends the accumulation time accordingly for a bright and sharp image f you set the shutter mode to Manual A FLK SENS UP mode will be deactivated The greater the Sens Up factor is the brighter the screen becomes but it may result in an afterimage or video delay N3JJY0S dNLAS e Sens up limit Set the work condition to Auto mode in a low contrast scene e Iris You can set the camera iris to Auto or Manual to your preference Auto Automatically sets the iris adaptively to the ambient lighting and shutter speed Manual Sets the iris to its maximum aperture e AGC mode Select AGC Control mode Adjust the gain value of the video that in particular was recorded at a low contrast scene and had a lower brightness level than normal to control the video br
96. d standards body or in the case of interfaces specified for a particular programming language one that is widely used among developers working in that language The System Libraries of an executable work include anything other than the work as a whole that a is included in the normal form of packaging a Major Component but which is not part of that Major Component and b serves only to enable use of the work with that Major Componert or to implement a Standard Interface for which an implementation is available to the public in source code form A Major Component in this context means a major essential component kernel window system and so on of the specific operating system if any on which the executable work runs or a compiler used to produce the work or an object code interpreter used to run it The Corresponding Source for a work in object code form means all the source code needed to generate install and for an executable work run the object code and to modify the work including scripts to control those activities However it does not include the work s System Libraries or generalpurpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work For example Corresponding Source includes interface definition files associated with source files for the work and the source code for shared libraries and dynamically link
97. d the play speed will increase accordingly If selecting lt 4 the button will switch to x8 x4 x2 x1 and the play speed will decrease accordingly To control the playback direction If you see the gt gt button with the play speed displayed the video will be played forward Whereas if you see the lt 4 button with the play speed displayed the video will be played backward 6 Move Time bar Ua to a desired time point of the video before playing it The time containing a normal recoding file will be highlighted in blue the time with the event recording will be highlighted in red English _73 web viewer To check time information of the playing video 1 Click the About button 2 Date and time information appears on the screen To back up the searched video 1 During playback click Rj on the scene to back up The scheduling window for backup start and end time appears 2 Click E39 button The Save As window appears 3 Confirm the save path and click Save button The screenshot will be backed up to the specified path To play the backup video The backup video will be saved in avi format The backup video can be played with any media player supporting the format on your PC 74_ web viewer Setup screen SETUP You can configure the video amp audio network event and system settings of the camera in the network 1 In the Live screen click Setup EAA 2 The Set
98. dation Inc 51 Franklin S 0 This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License The Program below refers to any such program or work and a work based on the Program means either the Program or any derivative work under copyright law that is to say a work containing the Program or a portion of it either verbatim or with modifications and or translated into another language Hereinafter translation is included without limitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running the Program is not restricted and the output from the Program is covered only if its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on what the Program does 1 You may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along with t
99. distributors to deny you these rights or to ask you to surrender these rights These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it For example if you distribute copies of the library whether gratis or for a fee you must give the recipients all the rights that we gave you You must make sure that they too receive or can get the source code If you link other code with the library you must provide complete object files to the recipients so that they can relink them with the library after making changes to the library and recompiling it And you must show them these terms so they know their rights We protect your rights with a two step method 1 we copyright the library and 2 we offer you this license which gives you legal permission to copy distribute and or modify the library To protect each distributor we want to make it very clear that there is no warranty for the free library Also if the library is modified by someone else and passed on the recipients should know that what they have is not the original version so that the original author s reputation will not be affected by problems that might be introduced by others Finally software patents pose a constant threat to the existence of any free program We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder
100. duct ID Enter the product ID that is registered with the Samsung DDNS service Quick connect It sets port forwarding automatically when used with a UPnP Universal Plug and Play supporting router e Public DDNS Select one of provided public DDNS servers when you use a public DDNS server Service Select desired public DDNS service server Host name Enter the name of the host that is registered with the DDNS server User name Enter the user name for the DDNS service Password Enter the password for the DDNS service 5 When dore click Apply IEH N3JJY0S dNLIJS Ei m f selected lt Quick connect gt be sure to select Samsung DDNS service English _93 Setup Screen Registering with DDNS To register your product with the Samsung DDNS 1 Visit the iPOLIS web site www samsungipolis com and sign in with a registered account 2 From the top menu bar select lt DDNS SERVICE gt lt MY DDNS gt 3 Click PRODUCT REGISTRATION 4 Enter the product ID You must perform the duplicate check for the ID that you entered 5 Select a lt CLASSIFICATIONS gt and specify the lt MODEL NUMBER gt 6 Specify the product location with a description if necessary 7 Click REGISTRATION The product will be added to the product list that you can check 94_ setup screen To connect to the Samsung DDNS in camera setup 1 From the DDNS setup page set lt DDNS gt to
101. e except to note that your license differs from this License and b otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public License and Netscape Public License Filling in the name of the Initial Developer Original Code or Contributor in the notice described in Exhibit A shall not of themselves be deemed to be modifications of this License 7 DISCLAIMER OF WARRANTY COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN AS IS BASIS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING WITHOUT LIMITATION WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS MERCHANTABLE FIT FOR A PARTICULAR PURPOSE OR NON INFRINGING THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT YOU NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR ASSUME THE COST OF ANY NECESSARY SERVICING REPAIR OR CORRECTION THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER 8 TERMINATION 8 1 This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach All sublicenses to the Covered Code which are properly granted shall survive any termination of this License Provisions which
102. e a work based on the Library independent of the use of the Library in a tool for writing it Whether that is true depends on what the Library does and what the program that uses the Library does 1 You may copy and distribute verbatim copies of the Library s complete source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and distribute a copy of this License along with the Library You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Library or any portion of it thus forming a work based on the Library and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a The modified work must itself be a software library b You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change c You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License d If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility other than
103. e all recipients a copy of this License along with the Program You may charge any price or no price for each copy that you convey and you may offer support or warranty protection for a fee 5 Conveying Modified Source Versions You may convey a work based on the Program or the modifications to produce it from the Program in the form of source code under the terms of section 4 provided that you also meet all of these conditions a The work must carry prominent notices stating that you modified it and giving a relevant date b The work must carry prominent notices stating that itis released under this License and any conditions added under section 7 This requirement modifies the requirement in section 4 to keep intact all notices c You must license the entire work as a whole under this License to anyone who comes into possession of a copy This License will therefore apply along with any applicable section 7 additional terms to the whole of the work and all its parts regardless of how they are packaged This License gives no permission to license the work in any other way but it does not invalidate such permission if you have separately received it d If the work has interactive user interfaces each must display Appropriate Legal Notices however if the Program has interactive interfaces that do not display Appropriate Legal Notices your work need not make them do so A compilation of a covered work with other
104. e of the memory card For your camera we recommend you use a memory card from the following manufacturers SD SDHC Memory Card Sandisk Transcend Memory cards of 4GB 32GB is recommended for using with this camera NOILOANNODO 8 NOILLVTIVLSNI Playback performance can be affected depending on the speed of memory card so use the high speed memory card It is recommended to use memory cards of at least class 6 speed Memory Card Use SD and SDHC memory cards feature a switch that disables writing data on to the media Having this switch to the Lock position will prevent accidental deletion of data stored in the memory card but at the same time will also prevent you from writing data on to the media Memory Card Components Contacts Lock Switch SD SDHC English _43 Installation amp connection CONNECTING WITH OTHER DEVICE AUDIO OUT AUDIO IN Monitor to install o SD POWER FOCUS RESET Power L Grounding cable Ethernet Monitor to install o The BNC Out terminal of the product is provided for easier installation and is not recommended for monitoring purposes If you keep the BNC cable connected a risk of lightening may cause damage or malfunction to the product 44_ installation amp connection Ethernet Connection Connect the Ethernet cable to the local network or to the Internet Power Supply Use the screwdriver to connect each line of the power
105. e placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License also called this License Each licensee is addressed as you A library means a collection of software functions and or data prepared so as to be conveniently linked with application programs which use some of those functions and data to form executables The Library below refers to any such software library or work which has been distributed under these terms A work based on the Library means either the Library or any derivative work under copyright law that is to say a work containing the Library or a portion of it either verbatim or with modifications and or translated straightforwardly into another language Hereinafter translation is included without limitation in the term modification Source code for a work means the preferred form of the work for making modifications to it For a library complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the library Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running a program using the Library is not restricted and output from such a program is covered only if its contents constitut
106. e the static IP settings only if the DHCP checkbox is unchecked If not using a Broadband Router For setting lt IP Address gt lt Subnet Mask gt and lt Gateway gt contact your network administrator 4 In the lt Port gt pane provide necessary iim information e HTTP Port Used to access the camera using the Internet browser defaulted to 80 e VNP Port Used to control the video signal transfer defaulted to 4520 5 Enter the password Enter the password of admin account which was used to access the camera The default password is 4321 K The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product Note that the security and other related issues caused by the unchanged password shall be responsible for the user m f you want to change the password refer to Administrator password change of the user setup page 118 6 Click OK Manual network setup will be completed 56_ network connection and setup If using a Broadband Router e IP Address Enter an address falling in the IP range provided by the Broadband Router ex 192 168 1 2 254 192 168 0 2 254 192 168 XXX 2 254 e Subnet Mask The lt Subnet Mask gt of the Broadband Router will be the lt Subnet Mask gt of the camera e Gateway The lt Local IP Address gt of the Broadband Router will be the lt Gateway gt of the camera 4 The settings
107. ear heating equipment or heavy cold area e Do not place this apparatus near conductive material e Do not attempt to service this apparatus yourself e Do not place a glass of water on the product e Do not install near any magnetic sources e Do not block any ventilation openings e Do not place heavy items on the product User s Manual is a guidance book for how to use the products The meaning of the symbols are shown below e Reference In case of providing information for helping of product s usages e Notice If there s any possibility to occur any damages for the goods and human caused by not following the instruction Please read this manual for the safety before using of goods and keep it in the safe place 6_ overview CONTENTS OVERVIEW INSTALLATION amp CONNECTION NETWORK CONNECTION AND SETUP 3 50 51 52 53 54 55 59 60 62 62 Important Safety Instructions Product Features Recomended PC Specifications Recomended SD SDHC Memory Card Specifications What s Included At a Glance SNB 7002 At a Glance SND 7082 At a Glance SND 7082F At a Glance SNV 7082 MAIAYSAO Mounting the Lens SNB 7002 Installation SND 7082 Installation SND 7082F Installation SNV 7082 Inserting Removing a SD Memory Card Memory Card Information Not Included Connecting with other Device Connecting the Camera Directly to Local Area Networking Connecting the Camera Directly
108. ed subprograms that the work is specifically designed to require such as by intimate data communication or control flow between those subprograms and other parts of the work The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source The Corresponding Source for a work in source code form is that same work 2 Basic Permissions All rights granted under this License are granted for the term of copyright on the Program and are irrevocable provided the stated conditions are met This License explicitly affirms your unlimited permission to run the unmodified Program The output from running a covered work is covered by this License only if the output given its content constitutes a covered work This License acknowledges your rights of fair use or other equivalent as provided by copyright law You may make run and propagate covered works that you do not convey without conditions so long as your license otherwise remains in force You may convey covered works to others for the sole purpose of having them make modifications exclusively for you or provide you with facilities for running those works provided that you comply with the terms of this License in conveying all material for which you do not control copyright Those thus making or running the covered works for you must do so exclusively on your behalf under your direction and control on terms that prohi
109. el As the sensitivity grows face detection becomes more close and detailed 6 Select lt Area gt tab and drag on the screen to define the desired detection area You can specify up to 4 detection areas 1g Conditions for face detection are as below Face detection can be applied to videos having the QVGA 320x240 resolution only For detection the face area should be bigger than 20 40 pixels at least Up to 35 faces within one frame image can be recognized in maximum unable to detect more 7 To delete a defined area click Clear button while the Area tab is selected 8 Set whether to use lt Detection result overlay gt When faces are detected their positions and sizes are marked with rectangles on the screen 9 Specify the activation time and activation condition For more information about lt Activation time gt and lt Action gt refer to Alarm input page 103 10 When done click Apply EEE I English _113 Setup screen Audio detection You can set to detect sound over the specified level and trigger an event accordingly 1 From the Setup menu select the lt Event FJ gt tab 2 Click lt Event setup gt 3 Select lt Audio detection gt from lt Event action setup gt 4 Set whether or not to lt Enable gt 5 Set the audio detection s sound level The lower the level the smaller the sound change is detected 6 Specify the activation time and act
110. elect a public certificate that contains the public key e Client certificate Select a public certificate that contains the client certificate key e Client private key Select a public certificate that contains the client private key 5 When done click Apply BEEZ To install remove 802 1x related certificates 1 Press the Browse EE button for each item and select a certificate to install 2 If no certificate is installed you will see Not Available appearing next to the selected item 3 Press the Install EZI button to start installation with a message of Installed next to the item 4 Press the Delete EEEH button to remove the certificate 98_ setup screen QoS You can specify the priority to secure a stable transfer rate for a specific IP 1 From the Setup menu select the lt Network I gt tab 2 Click lt QoS gt 3 Click the Add EZ button The IP list will be created 4 Enter an IP address to which you will apply Qos N3JY0S dNLIJS Z The default prefix for IPv4 is 32 For DSCP the default is set to 63 Only the IP addresses that are set to lt Use gt can be prioritized 5 Select an IP to delete from the list Click the Delete EEE button 6 When done click Apply BEEZ SNMP With the SNMP protocols the system or network admin can monitor the network devices on a remote site and configure the environment settings 1 From
111. emory Card compartment for the SD memory card Compartment 24_ overview AT A GLANCE SNV 7082 Appearance IS E la e I Item Top cover Camera Case Power Port Test Monitor Out Network Port Audio In Jack Audio Out Jack MAIAYSAO N E a A o Description Case cover used to protect the lens and the main unit Housing part that covers the camera body Used to plug the power cable Output port for test monitoring the video output Use the test monitor cable to connect to a mobile display and check the test video Used to connect the PoE or Ethernet cable for network connection Used to connect to a microphone Used to connect to speakers English _25 Overview Components 1 2 3 4 ae FP Item Description 1 Network Port Used to connect the PoE or Ethernet cable for network connection ALARM IN Used to connect the alarm input signal 2 Alarm 1 0 Port ALARM OUT Used to connect the alarm output signal GND Used for earth grounding Output port for test monitoring the video output Use the test monitor cable 3 Test Monitor Out to connect to a mobile display and check the test video The button restores all camera settings to the factory default Press and hold for about 5 seconds to reboot the system E If you reset the camera the network settings will be adjusted so that 4 Reset Button DHCP can be enabled If there is no
112. er subsection 6d A separable portion of the object code whose source code is excluded from the Corresponding Source as a System Library need not be included in conveying the object code work A User Product is either 1 a consumer product which means any tangible personal property which is normally used for personal family or household purposes or 2 anything designed or sold for incorporation into a dwelling In determining whether a product is a consumer product doubtful cases shall be resolved in favor of coverage For a particular product received by a particular user normally used refers to a typical or common use of that class of product regardless of the status of the particular user or of the way in which the particular user actually uses or expects or is expected to use the product A product is a consumer product regardless of whether the product has substantial commercial industrial or non consumer uses unless such uses represent the only significant mode of use of the product Installation Information for a User Product means any methods procedures authorization keys or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification
113. era s video input Intelligent Video Analysis Analyzes video to detect logical events of specified conditions from the camera s video input Face Detection Detects faces from the camera s video input Smart Codec Adaptively applies codecs for a portion of the camera s field of view to improve the quality of such area specified by user Audio Detection Detects sound louder than a certain level specified by user Auto Detection of Disconnected Network Detects network disconnection before triggering an event ONVIF Compliance This product supports ONVIF QO N Vi F For more information refer to www onvif org Driving network video through global standardization MAIAYSAO English _9 Overview RECOMENDED PC SPECIFICATIONS CPU Intel Core 2 Duo 2 4GHz or higher e Operating System Windows XP VISTA 7 Mac OS e Resolution 1280X1024 pixels or higher 32 bit color e RAM 2GB or higher e Web Browser Internet Explorer 7 or Higher Firefox 9 or Higher Chrome 15 or Higher Safari 5 1 or Higher Neither a beta test version unlike the version released in the company website nor the developer version will be supported a Itis recommended to connect to IPv6 in Windows 7 e Video Memory 256MB or higher aA m f the driver of the video graphic adapter is not installed properly or is not the latest version the video may not be played properly Fora multi monitoring system involving at least 2 monitors
114. ered Code or ownership rights under a license of Your choice which may contain terms different from this License provided that You are in compliance with the terms of this License and that the license for the Executable version does not attempt to limit or alter the recipient s rights in the Source Code version from the rights set forth in this License If You distribute the Executable version under a different license You must make it absolutely clear that any terms which differ from this License are offered by You alone not by the Initial Developer or any Contributor You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of any such terms You offer 3 7 Larger Works You may create a Larger Work by combining Covered Code with other code not governed by the terms of this License and distribute the Larger Work as a single product In such a case You must make sure the requirements of this License are fulfilled for the Covered Code 4 Inability to Comply Due to Statute or Regulation If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Code due to statute judicial order or regulation then You must a comply with the terms of this License to the maximum extent possible and b describe the limitations and the code they affect Such description must be included in the LEG
115. esses available will appear in the right side filter range column Z m f selected lt Allow gt for IP Filtering and lt IPv6 setup gt of lt Interface gt is set to lt Use gt both IPv4 and IPv6 addresses of the computer currently configuring should be assigned The IP address of the computer used for the current setup cannot be added to lt Deny gt it should be added to lt Allow gt Only the IP addresses that are set to lt Use gt will be displayed in the filter column 6 Select an IP to delete from the list Click the Delete EEE button 7 When done click Apply 96_ setup screen SSL You can select a secure connection system or install the public certificate for this purpose 1 From the Setup menu select the lt Network I gt tab 2 Click lt SSL gt 3 Select a secure connection system To access the camera using HTTPS mode you have to type the IP address for the camera in the form of https lt Camera_IP gt If you failed to configure the Web viewer settings in HTTPS mode with Internet Explorer edit the Internet options as follows lt Menu Tools gt Internet Options gt Advanced gt Security gt Uncheck TLS 1 0 and check TLS 1 1 TLS 1 2 gt N3JJY0S dNLIJS 4 Search for the public certificate that you want to install on the camera To install the certificate on the camera you need to provide a certificate name it can be arbitrarily assigned by the use
116. etutils GNU GENERAL PUBLIC LICENSE Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This General Public License applies to most of the Free Software Foundation s software and to any other program whose authors commit to using it Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibili
117. ght by the Free Software Foundation but is freely distributable The same holds for its supporting scripts config guess config sub Itconfig Itmain sh Another support script install sh is copyright by M I T but is also freely distributable It appears that the arithmetic coding option of the JPEG spec is covered by patents owned by IBM AT amp T and Mitsubishi Hence arithmetic coding cannot legally be used without obtaining one or more licenses For this reason support for arithmetic coding has been removed from the free JPEG software Since arithmetic coding provides only a marginal gain over the unpatented Huffman mode it is unlikely that very many implementations will support it So far as we are aware there are no patent restrictions on the remaining code The IJG distribution formerly included code to read and write GIF files To avoid entanglement with the Unisys LZW patent GIF reading support has been removed altogether and the GIF writer has been simplified to produce uncompressed GIFs This technique does not use the LZW algorithm the resulting GIF files are larger than usual but are readable by all standard GIF decoders We are required to state that The Graphics Interchange Format c is the Copyright property of CompuServe Incorporated GIF sm is a Service Mark property of CompuServe Incorporated Mozilla Public License Since we at Samsung Techwin used the Mozilla Firefox component without modifying t
118. ght to control the zoom and focus the lens so that you can view a clear sharp object English _29 Installation amp connection Precautions before installation Ensure you read out the following instructions before installing the camera e When installing on a ceiling or wall desired spot must be capable of supporting at least 5 times of the camera s weight e Stuck in or peeled off cables can cause damage to the product or a fire e For safety purposes keep anyone else away from the installation site And put aside personal belongings from the site just in case INSTALLATION SND 7082 Disassembling 1 Take the camera body with one hand and take the top cover with the other hand Then turn the cover counter Top cover clockwise to remove it Camera Body 2 Press the lt UNLOCK gt levers on both ends to separate camera module from the body 30_ installation amp connection 3 Hold down the lock lever in the outer direction as shown Camera Body bracket in the lt LOCK gt direction clockwise to remove it G gt Ei Bracket 2 Qo Q Installation z 1 Use the provided screws x3 to fix the O Z Arrange the cables through the bracket to Refer to Adjusting the monitoring direction Close the top cover and turn the camera body in the lt UNLOCK gt direction counter clockwise to remove the bracket from the body a f it fails take the bottom hole of the brac
119. hat covers the camera body Used to plug the power cable Output port for test monitoring the video output Use the test monitor cable to connect to a mobile display and check the test video Used to connect the PoE or Ethernet cable for network connection Used to connect to a microphone Used to connect to speakers Components MAIAYSAO Item Description 1 Network Port Used to connect the PoE or Ethernet cable for network connection Used to connect the alarm input signal 2 Alarm 1 0 Port Used to connect the alarm output signal GND Used for earth grounding Output port for test monitoring the video output Use the test monitor cable 3 Test Monitor Qut to connect to a mobile display and check the test video The button restores all camera settings to the factory default Press and hold for about 5 seconds to reboot the system F If you reset the camera the network settings will be adjusted so that 4 Reset Button DHCP can be enabled If there is no DHCP server in the network you must run the IP Installer program to change the basic network settings such as IP address Subnet mask Gateway etc before you can connect to the network English _23 Overview Item Description 5 iaieineea Press the lt UNLOCK gt levers on both ends to separate camera module from the body 6 Lens Lens for the camera Focus Adjustment he button adjusts the focus of image automatically Button SD M
120. he Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Program and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties under the terms of this License c If the modified program normally reads commands interactively when run you must cause it when started running for such interactive use in the most ordinary way to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally print such an announcement your work based on the Program is not required to print an announcement These requirements apply to the modified work as a whole
121. he backup path with a proper file name and click Save The backup file will be saved to the specified path in the format of bin To restore the backup settings 1 To restore the backup settings click Restore 2 Select a backup file and click Open 4 m f you perform the backup or restoration the web browser will be closed and the camera will reboots 120_ setup screen Log You can check the system log or event log 1 From the Setup menu select the lt System J gt tab 2 Click lt Log gt 3 Select a log type e System You can check the system logs where any system changes are recorded including the time information e Event You can check the event logs including the time information 4 From the right log list select an item to N3aYOS dNLIJS search for e f you select lt All gt in the top left dropdown list all logs for the applicable log type will be displayed 5 If one page can not display all the logs available use the bottom buttons to move to the previous next or the last item Z E If you want to view the details of a log click Info in the right column of the log the log information will be shown in the bottom pane Each page displays 15 logs with the latest one displayed at the top The event system log list can contain up to 1000 logs after that the existing logs will be deleted from the oldest one each time a new log is created
122. he rights conveyed herein 1 9 Modifications means any addition to or deletion from the substance or structure of either the Original Code or any previous Modifications When Covered Code is released as a series of files a Modification is A Any addition to or deletion from the contents of a file containing Original Code or previous Modifications B Any new file that contains any part of the Original Code or previous Modifications 1 10 Original Code means Source Code of computer software code which is described in the Source Code notice required by Exhibit A as Original Code and which at the time of its release under this License is not already Covered Code governed by this License 1 10 1 Patent Claims means any patent claim s now owned or hereafter acquired including without limitation method process and apparatus claims in any patent Licensable by grantor 1 11 Source Code means the preferred form of the Covered Code for making modifications to it including all modules it contains plus any associated interface definition files scripts used to control compilation and installation of an Executable or source code differential comparisons against either the Original Code or another well known available Covered Code of the Contributor s choice The Source Code can be in a compressed or archival form provided the appropriate decompression or de archiving software is widely available for no charge
123. he source code according to the MOZILLA Public license 1 1 we are not obliged to provide the source code of the corresponding component e Version 1 1 1 Definitions 1 0 1 Commercial Use means distribution or otherwise making the Covered Code available to a third party 1 1 Contributor means each entity that creates or contributes to the creation of Modifications 1 2 Contributor Version means the combination of the Original Code prior Modifications used by a Contributor and the Modifications made by that particular Contributor 1 3 Covered Code means the Original Code or Modifications or the combination of the Original Code and Modifications in each case including portions thereof 1 4 Electronic Distribution Mechanism means a mechanism generally accepted in the software development community for the electronic transfer of data 1 5 Executable means Covered Code in any form other than Source Code 1 6 Initial Developer means the individual or entity identified as the Initial Developer in the Source Code notice required by Exhibit A 1 7 Larger Work means a work which combines Covered Code or portions thereof with code not governed by the terms of this License 1 8 License means this document 1 8 1 Licensable means having the right to grant to the maximum extent possible whether at the time of the initial grant or subsequently acquired any and all of t
124. heck all network connections If the camera is connected over an PPPoE network it s possible for Viewer to disconnect under poor network conditions When you try to connect to the system using a tab browser the same cookie information is shared resulting in errors when connected Therefore instead of using a tab browser open a new browser window to connect to the system Turn off the firewall settings on your PC and then search the camera again Images overlap No image appears Check whether two or more cameras are set to a single multicast address instead of different addresses If a single address is used for multiple cameras the images may overlap If the transmission method is set to multicast check whether there is a router that supports multicast in the LAN the camera is connected to English _133 XIGNAddV aooendlx PROBLEM lt Motion detection Video analytics gt of lt Event setup gt is set to lt Enable gt but no notification e mail reaches me even when an analysis event had occurred SOLUTION e Verify the settings in the following sequence A Check lt Data amp Time gt settings B The lt Motion detection Video analytics gt should be set to lt Enable gt C Check if the lt E mail gt option of lt Event action setup gt menu is checked to use Can define event rules even when don t use lt Motion detection Video analytics gt e Yes it can be You
125. hecked m 11 Auto Set The IP Installer automatically configures the network settings 2 z Oo 12 Manual Set You should configure the network settings manually o E 13 Exit Exits the IP Installer program ii 4 For the IP installer use only the installer version provided in the installation CD or use the latest one if available You can download the latest version from the Samsung web site www samsungcctv com STATIC IP SETUP Manual Network Setup Run lt IP Installer_v2 XX exe gt to display the camera search list At the initial startup both Auto Set and Manual Set will be grayed out D For cameras found with the IPv6 setting these buttons will be grayed out as the cameras do not support this function 1 Select a camera in the search list Check the MAC address of the camera on the camera s label Both the Auto Set and Manual Set buttons will be activated 2 Click Manual Set The Manual Setting dialog appears The default values of lt IP Address gt lt Subnet Mask gt lt Gateway gt lt HTTP Port gt and lt VNP Port gt of the camera will be displayed English _55 network connection and setup 3 In the lt Address gt pane provide the Minis Saing asia necessary information e MAC Ethernet Address The MAC sian address imprinted on the camera Sula Mak label is automatically displayed and potas requires no user setting Farmi 4 You can configur
126. herwise be available to you under applicable patent law 12 No Surrender of Others Freedom If conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of thisLicense If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not convey it at all For example if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program 13 Use with the GNU Affero General Public License Notwithstanding any other provision of this License you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work and to convey the resulting work The terms of this License will continue to apply to the part which is the covered work but the special requirements of the GNU Affero General Public License section 13 concerning interaction through a network will apply to the combination as such 14 Revised Versions of this License The Free Software Foundation may publish revised and or new versions of the GNU General Public License from time to time Such new
127. ibrary In addition mere aggregation of another work not based on the Library with the Library or with a work based on the Library on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library To do this you must alter all the notices that refer to this License so that they refer to the ordinary GNU General Public License version 2 instead of to this License If a newer version than version 2 of the ordinary GNU General Public License has appeared then you can specify that version instead if you wish Do not make any other change in these notices Once this change is made in a given copy it is irreversible for that copy so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy This option is useful when you wish to copy part of the code of the Library into a program that is not a library 4 You may copy and distribute the Library or a portion or derivative of it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided t hat you accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange If distribution of obje
128. ibution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of Apple Inc Apple nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL APPLE OR ITSCONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Part 9 ScienceLogic LLC copyright notice BSD Copyright c
129. ibutor s essential patent claims to make use sell offer for sale import and otherwise run modify and propagate the contents of its contributor version u In the following three paragraphs a patent license is any express agreement or commitment however denominated not to enforce a patent such as an express permission to practice a patent or covenant not to sue for patent infringement To grant such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party If you convey a covered work knowingly relying on a patent license and the Corresponding Source of the work is not available for anyone to copy free of charge and under the terms of this License through a publicly available network server or other readily accessible means then you must either 1 cause the Corresponding Source to be so available or 2 arrange to deprive yourself of the benefit of the patent license for this particular work or 3 arrange in a manner consistent with the requirements of this License to extend the patent license to downstream recipients Knowingly relying means you have actual knowledge that but for the patent license your conveying the covered work in a country or your recipient s use of the covered work in a country would infringe one or more identifiable patents in that country that you have reason to believe are valid If pursuant to or in connection with
130. ied Program or a work based on the Program To propagate a work means to do anything with it that without permission would make you directly or secondarily liable for infringement under applicable copyright law except executing it on a computer or modifying a private copy Propagation includes copying distribution with or without modification making available to the public and in some countries other activities as well To convey a work means any kind of propagation that enables other parties to make or receive copies Mere interaction with a user through a computer network with no transfer of a copy is not conveying An interactive user interface displays Appropriate Legal Notices to the extent that it includes a convenient and prominently visible feature that 1 displays an appropriate copyright notice and 2 tells the user that there is no warranty for the work except to the extent that warranties are provided that licensees may convey the work under this License and how to view a copy of this License If the interface presents a list of user commands or options such as a menu a prominent item in the list meets this criterion 1 Source Code The source code for a work means the preferred form of the work for making modifications to it Object code means any non source form of a work A Standard Interface means an interface that either is an official standard defined by a recognize
131. ightness Special Setup SNB 7002 1 Select lt Special gt 2 Select each item and set it properly e Day amp night You can switch the mode to adjust the black and white level as well as the colors Color Always displays the video in colors BWW Always displays the video in black and white Auto Displays in color mode during normal daytime and switches to black and white mode in a low contrast scene at night f you set the AGC mode to lt Off gt from lt Exposure gt the AUTO DAY NIGHT mode will be disabled accordingly External B W Control the image modes of Color and B W when an external IR is synchronized via the Alarm In port English _85 Setup screen e Dwell time This is the time while each applicable lighting condition is kept in order to enable the switch between day and night modes e Duration Specify the time interval of lighting at which the sequence operation is triggered e Simple focus after D N When switching day night mode automatically runs focus adjustment When using IR lens with the camera set this to lt Off gt D Setting lt Simple focus after D N gt option may cause false focus adjustment under a specific condition For further details refer to Focus setup Page 89 e Sharpness mode Adjust the overall sharpness of the image If selecting lt On gt you can adjust the sharpness of the image e Sharpness level The higher the level is the shar
132. ily used for software interchange for a price no more than your reasonable cost of physically performing this conveying of source or 2 access to copy the Corresponding Source from a network server at no charge c Convey individual copies of the object code with a copy of the written offer to provide the corresponding Source This alternative is allowed only occasionally and noncommercially and only if you received the object code with such an offer in accord with subsection 6b d Convey the object code by offering access from a designated place gratis or for a charge and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge You need not require recipients to copy the Corresponding Source along with the object code If the place to copy the object code is a network server the Corresponding Source may be on a different server operated by you or a third party that supports equivalent copying facilities provided you maintain clear directions next to the object code saying where to find the Corresponding Source Regardless of what server hosts the Corresponding Source you remain obligated to ensure that it is available for as long as needed to satisfy these requirements e Convey the object code using peer to peer transmission provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge und
133. installation on the wall ASSY Tapping Screw or ceiling Used to remove fix the dome cover SNV 7082 For fixing a screw 4 L Wrench Inserted in a hole reinforced anchoring force Plastic Anchor Used for assembling the dome case when installing the product on the pipe wall mount etc or blocking a hole Machine Screws Lens Options not included Optional lens to be inserted in CS C Lens SNB 7002 a Camera English _13 MAIAYSAO overview AT A GLANCE SNB 7002 Front Side Item Camera Holder Mount Holes Mounting Bracket Screw Hole 14 overview Description Used when you mount the camera onto the bracket by fixing the camera holder mount adaptor with the bracket Used to fix the camera on a bracket o r mounting bracket The screw size use this screw to fix the mounting bracket 1 4 20UNC 20THREAD L 4 5mm 0 2mm ISO Standard Standard or 0 197 ASA a Item Description Auto Iris Lens Optional Installed on the lens adaptor Auto Iris Lens Connector Used to supply power and output signal to control the iris of the lens D Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol Mounting Bracket is not included For more information to use mounting bracket refer to the product s documentation English _15 MAIAYSAO overview Rear Side AUDIO OUT AUDIO I
134. ith a written offer valid for at least three years to give any third party for a charge no more than your cost of physically performing source distribution a complete machinereadable copy of the corresponding source code to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or c Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the executable However as a special exception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place
135. ituation where Simple focus is hardly applied try to use the manual focus mode English _89 setup screen Focus setup SND 7082 SND 7082F SNV 7082 You can adjust the focus and zoom ratio of video image 1 From the Setup menu select the lt Video amp Audio EJ gt tab 2 Click lt Focus setup gt 3 Set the focus and zoom e Focus Manually adjusts the lens focus Far lt gt Near e Zoom Manually adjusts the zooming Wide lt gt Tele e Simple focus Click J button to fit the focus automatically m The Simple focus mode may not fit correctly in the following cases Sudden change to the object in Simple focus mode sudden movement appearance or disappearance Radical change to the brightness in Simple focus mode Image of a low contrast lf the camera is exposed to a strong light source in the front or surroundings Incase the focus is inappropriate apart from mentioned above use EMB EE EJ F EA GT button to manually adjust the focus Ina Situation where Simple focus is hardly applied try to use the manual focus mode 90_ setup screen NETWORK SETUP Interface 1 Click lt Interface gt Set the lt Interface gt and lt IPv6 setup gt From the Setup menu select the lt Network I gt tab as necessary e P type Select an IP connection type Manual Specify the IP address Subnet mask Gateway DNS1 and DNS2 DHCP Specify the D
136. ivation condition For more information about lt Activation times and lt Action gt refer to Alarm input page 103 7 When done click Apply BEEZ D m f detected audio level is too low set the audio input gain to a higher level in lt Audio setup gt Network disconnection You can receive and save events of a physically disconnected network 1 From the Setup menu select the lt Event FJ gt tab 2 Click lt Event setup gt 3 Select lt Network disconnection gt from lt Event action setup gt 4 Set whether or not to lt Enable gt 5 Specify the activation time and activation condition For more information about lt Activation time gt and lt Action gt refer to Alarm input page 103 6 When done click Apply EEH 114_ setup screen Alarm output setup 1 Click lt Alarm output setup gt Set the camera s type of alarm output From the Setup menu select the lt Event F gt tab f you change the alarm output type the alarm out button on the monitoring page and alarm output type displayed on Event Setup page will be changed accordingly N3JJY0S dNLIJS e Type Normal open Considers Open circuit status of the sensor or alarm input device as normal and triggers alarm event if becomes Closed circuit status Normal close Considers Closed circuit status of the sensor or alarm input device as normal and trigge
137. iversity College London All rights reserved Redistribution and use in source and binary forms with or without modification is permitted provided that the following conditions are met htto www net snmp org about license htm htto www opensource org licenses bsd license html 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes software developed by the Computer Science Department at University College London 4 Neither the name of the University nor of the Department may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSEARE DISCLAIMED IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR
138. ket and turn the bracket to a desired position on the ceiling or wall Ensure that the lt CAMERA FRONT gt label on the bracket faces the direction for camera monitoring the ceiling or wall If you drill a hole in the ceiling cover for wiring press hard to remove the cover and attach the dust proof plate to it and arrange the cables through the plate If you intend to arrange the cables without drilling a 7 hole use the empty area opposite to the lt CAMERA Wiring Cover FRONT gt label side for the wiring purpose Mount the camera body onto the bracket Align the marking hole of the camera body with the lt CAMERA FRONTS label of the bracket and turn the body in the lt LOCK gt direction Assemble the camera module to the body for the camera to adjust the lens in a desired direction page 38 Fit the top cover into the fixing tips of the camera body and turn the cover clockwise English _31 Installation amp connection INSTALLATION SND 7082F 32_ Disassembling 1 1 Take the camera body with one hand and take the top cover with the other hand Then turn the cover counter clockwise to remove it Camera Body Installation Use the provided template to drill one hole for tees Y SEES eA x fk ye A Connect and arrange the necessary cables Insert the camera body into the hole so that it the camera and one for the screw 5 mm in Sie ge dia
139. l please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal axe Correct disposal of batteries in this product Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system SALES NETWORK SAMSUNG TECHWIN CO LTD Samsungtechwin R amp D Center 701 Sampyeong dong Bundang gu Seongna
140. lation amp connection Grounding the Product SNB 7002 Use a screw driver to connect earth grounding cable to the ground terminal below the power inlet terminal Grounding protects the product from a surge or lightning When grounding make sure to turn the product s power off Recommended Grounding Cable e Length Less than 3M e Gauge 18 AWG or bigger Ex UL1007 AWG 18 16 UL1015 AWG18 16 14 12 UL2468 AWG18 16 14 46_ installation amp connection Connecting to Audio Input Output Speaker Microphone AUDIO OUT AUF lo N ai Speaker Speaker Amp Amp Microphone SNNSINVS Microphone Microphone Speaker NOILOANNODO 8 NOLLVTIVLSNI English _47 Installation amp connection 1 Connect the AUDIO IN port of the camera with the microphone or LINE OUT port of the amplifier that the microphone is connected to 2 Connect the AUDIO OUT port of the camera with the speaker or LINE IN port of the amplifier that the speaker is connected to 3 Check the specifications for audio input e Audio Codec G 711 PCM u law 64kbps 8kHz G 726 16Kbps 24Kbps 32Kbps 40Kbps sampling e Full duplex Audio e Audio in Used for mono signal line input Max 2 4 Vpp e Audio out Used for mono signal line output Max 2 4 Vpp e Line out impedance 6000 Connecting to the I O port box SNB 7002 Connect the Alarm I O signal to the corresponding port of the re
141. lay the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products derived from this software without prior written permission For written permission please contact openssl core openssl org Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written permission of the OpenSSL Project 6 Redistributions of any form whatsoever must retain the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE U
142. list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes cryptographic software written by Eric Young eay cryptsoft com The word cryptographic can be left out if the rouines from the library being used are not cryptographic related 4 If you include any Windows specific code or a derivative thereof from the apps directory application code you must include an acknowledgement This product includes software written by Tim Hudson tjh cryptsoft com THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT
143. m input signal 9 Alarm 1 0 Port ALARM OUT Used to connect the alarm output signal GND Used for earth grounding Output port for test monitoring the video output Use the test monitor cable 10 Test Monitor Qut to connect to a mobile display and check the test video English _17 overview AT A GLANCE SND 7082 Appearance INNSINVS Item Description 1 Top cover Case cover used to protect the lens and the main unit 2 Camera Case Housing part that covers the camera body 18_ overview cr A O o E oy A lo Item Power Port Test Monitor Out Network Port Audio In Jack Audio Out Jack Description Used to plug the power cable Output port for test monitoring the video output Use the test monitor cable to connect to a mobile display and check the test video Used to connect the PoE or Ethernet cable for network connection Used to connect to a microphone Used to connect to speakers English _19 MAIAYSAO overview Components 20_ overview 2 Alarm 1 0 Port 4 Test Monitor Out 5 Focus Adjustment Button SD Memory Card 6 K Compartment 7 Lock Release Lever 8 Bracket 9 Wiring Cover 10 Release Lock ALARM OUT Used to connect the alarm output signal Description Lens for the camera ALARM IN Used to connect the alarm input signal GND Used for earth grounding MAIAYSAO The button restores all c
144. m si Gyeonggi do Korea 463 400 TEL 82 70 7147 8740 60 FAX 82 31 8018 3745 SAMSUNG TECHWIN AMERICA Inc SAMSUNG TECHWIN EUROPE LTD 100 Challenger Rd Suite 700 Ridgefield Park NJ 07660 Samsung House 1000 Hillswood Drive Hillswood Business Toll Free 1 877 213 1222 Direct 1 201 325 6920 Park Chertsey Surrey UNITED KINGDOM KT16 OPS Fax 1 201 373 0124 TEL 44 1932 45 5300 FAX 44 1932 45 5325 www samsungcctvusa com www samsungtechwin com www samsungsecurity com www samsungipolis com
145. may differ depending on the connected Broadband Router model For more information refer to the user manual of the applicable router dN13S ANY NOILOANNOO MYOMLAN For more information about port forwarding of the broadband router refer to Port Range Forward Port Mapping Setup Page 60 If the Broadband Router has more than one camera connected Configure the IP related settings and the Port related settings distinctly with each other ex Category Camera 1 Camera 2 IP Address 192 168 1 100 192 168 1 101 IP related settings Subnet Mask 255 255 255 0 255 255 255 0 Gateway 192 168 1 1 192 168 1 1 HTTP Port 8080 8081 Port related settings VNP Port 4520 4521 4 m f the lt HTTP Port gt is set other than 80 you must provide the lt Port gt number in the address bar of the Internet browser before you can access the camera ex http IP address HTTP Port http 192 168 1 100 8080 English _57 network connection and setup Auto Network Setup Run lt IP Installer_v2 XX exe gt to display the camera search list At the initial startup both Auto Set and Manual Set will be grayed out 4 For cameras found with the IPv6 setting these buttons will be grayed out as the cameras do not support this function 1 Select a camera in the search list Check the MAC address of the camera on the camera s label Both the Auto Set and Manual Set buttons will be activated 2 Click Auto Set The
146. meter at least 35 mm in depth and inset 1 4 the plastic anchor HUR 5 to the end of the cee screw hole Se lest that they should be damaged or twisted while installing the camera fits to the camera hole and fix the body using the ASSY tapping screws TH M4xL30 x3 Refer to Adjusting the monitoring direction for the camera to adjust the lens in a desired direction page 38 Close the top cover Fit the top cover into the fixing tips of the camera body and turn the cover clockwise installation amp connection To add an alarm cable not included 1 For this first you should remove the top cover from the housing 2 Pull out the protruding rubber bar as shown 3 This will reveal a hole in the place of the rubber bar through which you insert the cable and connect it to the alarm terminal on the PCB 4 Connect and arrange the necessary cables power video etc lest that they should be damaged or caught while installing the camera Then install the camera assembly in the reverse order of the disassembly 5 Refer to Adjusting the monitoring direction for the camera to adjust the lens in a desired direction page 38 6 Close the top cover English _33 NOILOANNODO 8 NOLLVTIVLSNI Installation amp connection INSTALLATION SNV 7082 Disassembling 1 With the provided L shaped Top cover wrench loosen 3 bolts on the top cover counter clockwise to remove the
147. n event occurs 8 When done click Apply EZE 104_ setup screen Tampering detection You can set to detect tampering attempts and trigger events such as sudden change of camera s framing direction blocked lens and other overall change of scenes from the video 1 From the Setup menu select the lt Event F gt tab 2 Click lt Event setup gt Select lt Tampering detection gt from lt Event action setup gt Set whether or not to lt Enable gt Set the tampering detection sensitivity The higher the sensitivity detects the minutest tampering attempts Specify the activation time and activation condition For more information about lt Activation time gt and lt Action gt refer to Alarm input page 103 7 When done click Apply BEEZ NJJY0S dNLAS emma IHR EPEE Peerteeet Het HELP FPS IGS SS tie ey The default tampering detection function may not work properly in the following cases Under circumstances of simple background or low illumination and night time may lower the detection sensitivity A severe shaking of the camera or a drastic change to the illumination can be considered a tampering by mistake tampering was made Detection of the tampering may take some time maximum 5 seconds right after the Once a tampering is detected the camera will resume a normal operating after a certain Stability time approx 5 seconds during
148. n mode 2 Select lt Sensitivity gt tab to set the sensitivity level You can set the sensor s sensitivity to detect a motion out of the background from the monitoring video Ay n a situation that definitely distinguishes objects out of backgrounds set this to a low sensitivity level For opposite case that is hard to distinguish objects like low illuminated situation set this to a high level 3 Select lt Size gt tab You can limit the minimum maximum size of motion to be detected e Minimum Size To set the minimum size of detected motions select lt Minimum Size gt and then point and drag to the desired size on the screen using the mouse e Maximum Size To set the maximum size of detected motions select lt Maximum Size gt and then point and drag to the desired size on the screen with your mouse AR Motions smaller than the specified minimum size or bigger than the maximum size are not detected To avoid unintended detections caused by great and small noises set minimum maximum motion sizes appropriately in accordance to your environments Note that same motions on the same location can be differently detected in their detection size it is recommended to consider and include the tolerable difference when setting the minimum maximum detection sizes 108_ setup screen 4 Select lt Area gt tab You can specify an area on the screen to include or exclude the area to from detection You can spe
149. n the documentation and or other materials provided with the distribution yy Neither the name of Sparta Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Part 6 Cisco BUPTNIC copyright notice BSD Copyright c 2004 Cisco Inc and Information Network Center of Beijing University of Posts and Telecommunications All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met yy Redistributions of source code must retain the above copyright notice this list of conditions and the following
150. ncheck lt DHCP gt you can change IP to lt Static gt DNC Wikis ie IP Addie Manual Setting Subaa haa eae Farmad English _59 dN13S ANY NOILOANNOO MYOMLAN network connection and setup PORT RANGE FORWARD PORT MAPPING SETUP If you have installed a Broadband Router with a camera connected you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it Manual Port Range Forwarding 1 From the Setup menu of the Broadband ST Applications Router select lt Applications amp Gaming gt lt Port Range Forward gt For setting the port range forward for a third party Broadband Router refer to the user guide of that Broadband Router 2 Select lt TCP gt and lt UDP Port gt for each connected camera to the Broadband Router Each port number for the Broadband Router should match that specified in lt Setup gt lt Network gt lt Port gt from the camera s web viewer menu 3 When done click Save Settings Your settings will be saved D Above sample instructions are based on the CISCO s Broadband Router The settings may differ depending on the connected Broadband Router model For more information refer to the user manual of the applicable router 60_ network connection and setup Setting up Port Range Forward for several network cameras When several network cameras are connected to one Broadband Router device y
151. nder Sections 2 1 b and 2 2 b are revoked effective as of the date You first made used sold distributed or had made Modifications made by that Participant 8 3 If You assert a patent infringement claim against Participant alleging that such Participant s Contributor Version directly or indirectly infringes any patent where such claim is resolved such as by license or settlement prior to the initiation of patent infringement litigation then the reasonable value of the licenses granted by such Participant under Sections 2 1 or 2 2 shall be taken into account in determining the amount or value of any payment or license 8 4 In the event of termination under Sections 8 1 or 8 2 above all end user license agreements excluding distributors and resellers which have been validly granted by You or any distributor hereunder prior to termination shall survive termination 9 LIMITATION OF LIABILITY UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY WHETHER TORT INCLUDING NEGLIGENCE CONTRACT OR OTHERWISE SHALL YOU THE INITIAL DEVELOPER ANY OTHER CONTRIBUTOR OR ANY DISTRIBUTOR OF COVERED CODE OR ANY SUPPLIER OF ANY OF SUCH PARTIES BE LIABLE TO ANY PERSON FOR ANY INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF GOODWILL WORK STOPPAGE COMPUTER FAILURE OR MALFUNCTION OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES EVEN IF SUCH PARTY SHALL HAVE BEEN I
152. of the alarm starting from the time point the images will be transferred You can specify up to 5 seconds before the occurrence of the alarm e Post alarm duration Specify the time point after the occurrence of the alarm to the specified time point the images will be transferred You can specify up to 120 seconds after the occurrence of the alarm e Normal Make recording at a certain frame rate e Event Set the recording type for a certain event that occurs 4 Specify the lt Normal record setup gt e Always Always save recorded video in the SD memory card m f set to Always the activation time cannot be changed e Only scheduled time Records only on the specified time of the specified day of week e Clear ZG Reset all settings 5 When done click Apply EEE 102_ setup screen Alarm input You can set the alarm input type activation time and operation mode 1 From the Setup menu select the lt Event F gt tab 2 Click lt Event setup gt 3 Select lt Alarm input gt from lt Event action setup gt 4 Set whether or not to lt Enable gt 5 Specify an input device e Type Normal open It is normally open but if it is closed an alarm will be EEN ii A triggered i a Lhi irii eii i SSS Normal close It is normally closed but if it is open an alarm will be triggered 6 Specify the lt Activation time gt e Always Always check if an alarm occurs It activate
153. ompanying the product 4 overview Class I construction An apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection Battery Batteries battery pack or batteries installed shall not be exposed to excessive heat such as sunshine fire or the like MAIAYSAO Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type Disconnection Device Disconnect the main plug from the apparatus if it s defected And please call a repair man in your location When used outside of the U S it may be used HAR code with fittings of an approved agency is employed CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so The BNC Out terminal of the product is provided for easier installation and is not recommended for monitoring purposes If you keep the BNC cable connected a risk of lightening may cause damage or malfunction to the product Please use the input power with just one camera and other devices must not be connected English _5 Overview Please read the following recommend safety precautions carefully Do not place this apparatus on an uneven surface e Do not install on a surface where it is exposed to direct sunlight n
154. or Cable Modem DDNS Server Data Center KOREA dN13S ANY NOILOANNOO MYOMLAN G Local P Configuring the network settings of the local PC connected to a Broadband Router Configuring the network settings of the local PC connected to a Broadband Router follow the instructions below e Select lt Network Neighborhood gt gt lt Properties gt gt lt Local Area Connection gt gt lt Properties gt gt lt General gt gt lt Internet Protocol TCP IP gt gt lt Properties gt gt lt Obtain an IP address automatically gt or lt Use the following IP address gt e Follow the instructions below if you select lt Use the following IP address gt ex1 If the address LAN IP of the Broadband Router is 192 168 1 1 IP address 192 168 1 100 Subnet Mask 255 255 255 0 Default Gateway 192 168 1 1 ex2 If the address LAN IP of the Broadband Router is 192 168 0 1 IP address 192 168 0 100 Subnet Mask 255 255 255 0 Default Gateway 192 168 0 1 ex3 If the address LAN IP of the Broadband Router is 192 168 xxx 1 IP address 192 168 xxx 100 Subnet Mask 255 255 255 0 Default Gateway 192 168 xxx 1 D For the address of the Broadband Router refer to the product s documentation For more information about port forwarding of the broadband router refer to Port Range Forward Port Mapping Setup Page 60 English _53 network connection and setup BUTTONS USED IN IP INSTALLER
155. ou should forward the TCP 943 port of the router to the TCP 943 port of a connected camera i m f you don t set properly the TCP 943 port of the router you cannot get any video stream from the web page of the camera e TCP 948 port is a port for the Silverlight policy server of a camera e You can set a rule of Port Forwarding on the Broadband Router device through its configuration web page e You cannot change the Silverlight policy server port of a camera e You can change the ports of the camera except the policy server port through its configuration web pages When Camera1 and Camera2 are connected to a router dN13S ANY NOILOANNOO MYOMLAN Camera1 192 168 1 100 Web Server Port Device port RTSP port Policy server port Ea Camera2 192 168 1 101 Web Server Port RTSP port Policy server port English _61 network connection and setup CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1 Run the IP Installer It will scan for connected cameras and display them as a list 2 Double click a camera to access The Internet browser starts and connects to the camera D Access to the camera can also be gained by typing the camera s IP address in the address bar of the Internet browser CONNECTING TO THE CAMERA FROM A REMOTE PC VIA THE INTERNET Since using the IP Installer on a remote computer that is not in the Broadband Router s network cluster is not allowed u
156. pendent JPEG Group 3 Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences the authors accept NO LIABILITY for damages of any kind These conditions apply to any software derived from or based on the IJG code not just to the unmodified library If you use our work you ought to acknowledge us Permission is NOT granted for the use of any IJG author s name or company name in advertising or publicity relating to this software or products derived from it This software may be referred to only as the Independent JPEG Group s software We specifically permit and encourage the use of this software as the basis of commercial products provided that all warranty or liability claims are assumed by the product vendor ansi2knr c is included in this distribution by permission of L Peter Deutsch sole proprietor of its copyright holder Aladdin Enterprises of Menlo Park CA ansi2knr c is NOT covered by the above copyright and conditions but instead by the usual distribution terms of the Free Software Foundation principally that you must include source code if you redistribute it See the file ansi2knr c for full details However since ansi2knr c is not needed as part of any program generated from the IJG code this does not limit you more than the foregoing paragraphs do The Unix configuration script configure was produced with GNU Autoconf It is copyri
157. per and clearer the outline of the image becomes e Gamma Adjust the contrast of the image e Color level Adjust the color level of the image e Alarm in Set the image to Color or B W depending on the Open Close state of the alarm sensor a f the Day amp Night mode is set to Externe B W the alarm in function of the event alarm input page will be disabled Special Setup SND 7082 SND 7082F SNV 7082 1 Select lt Special gt Hea bae Bide Lae Seach Ge Mee set 2 Select each item and set it properly e Day amp night You can switch the mode to adjust the black and white level as well as the colors Color Always displays the video in colors B W Always displays the video in black and white Auto Displays in color mode during normal daytime and switches to black and white mode in a low contrast scene at night f you set the AGC mode to lt Off gt from lt Exposure gt the AUTO DAY NIGHT mode will be disabled accordingly External B W Control the image modes of Color and B W when an external IR is synchronized via the Alarm In port 86_ setup screen e Dwell time This is the time while each applicable lighting condition is kept in order to enable the switch between day and night modes e Duration Specify the time interval of lighting at which the sequence operation is triggered e Sharpness mode Adjust the overall sharpness of the image If selecting lt On gt you can adjust
158. plied 80_ setup screen SSDR Samsung Super Dynamic Range Setup In a scene where the difference between bright and dark is severe you can increase the brightness of the dark area alone to regulate the overall brightness 1 Select lt SSDR gt Ch ee eee 2 Set lt Mode gt to lt On gt 3 Configure the lt Level gt and lt D Range gt settings as necessary e Level Adjust the level of the dynamic range e D Range Select the amplitude area of the dynamic range N3JJY0S dNLAS White balance Setup You can correct the image colors based on white under any lighting conditions 1 Select lt White balance gt 2 Select lt Mode gt e ATW Corrects the colors of the camera video automatically e Manual You can adjust the red and blue gains of the camera video manually e AWC Corrects the colors of the camera video to be optimized to the current lighting condition and screen mode To obtain the optimal condition for the current lighting put the focus of the camera to a white paper and press the AWC Set button If the lighting environment is changed you should readjust the settings accordingly e Outdoor Automatically corrects the video colors of the camera to be optimized to the outdoor environment e Indoor Automatically corrects the video colors of the camera to be optimized to the indoor environment 4 In AWC mode click the AWC Set button if you want to keep the white balance level
159. plied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU Lesser General Public License for more details You should have received a copy of the GNU Lesser General Public License along with this library if not write to the Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you by electronic and paper mail You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the library if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the library Frob a library for tweaking knobs written by James Random Hacker signature of Ty Coon 1 April 1990 Ty Coon President of Vice Open SSL LICENSE Copyright c 1998 2006 The OpenSSL Project All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution All advertising materials mentioning features or use of this software must disp
160. prees Piat Spee 5a maa by biin Daae E aii tha a ia a 6 Click lt Install gt Cha miaa ba sehen g elie oars of Tiii paitaa iar rise aba aah HE English _67 YAMAIA GAM web viewer 7 Enter the password of the account currently logged in and click lt Install Software gt and continue 8 Once completed click lt Close gt 68_ web viewer Installer te trying to iestall new software Type your password to aliie this INSTALLING STW WebViewer PLUGIN If connecting to a camera for the first time you will see the installation message Then install the required WebViewer Plugin to access the camera and control the video from it in real time g m Microsoft Visual C 2010 Redistribute Package should be installed on the PC before you can install the Web viewer plug in If Visual Studio 2010 is not installed yet you will see the error message of There is no VC 2010 runtime installed Please install the runtime library Run the vcredist_x86 exe file which can be found from Samsung website at www samsungcctv com or the provided installation CD The vcredist_x86 exe file is installer program of Microsoft s Visual Studio 2010 redistributable package for 32 bit operating systems 1 When accessing the start screen of the monitoring page click the yellow warning message in the top of the page 2 Click lt Run Add on gt 3 The security warning popup appears click Run 4 When the
161. r certificate file issued from the certification authority and a key file The lt HTTPS Secure connection mode using the public certificate gt item will be active only if there exists a public certificate installed 5 When done click Apply Installing the certificate 1 Enter the certificate name 2 Select the certificate file to be installed and certificate key and click Install EZZ button Deleting the certificate 1 Click Delete EEE button 2 To delete a public certificate you should access the network video decoder in the mode of lt HTTP Do not use secure connection gt or lt HTTPS Secure connection mode using a unique certificate gt English _97 Setup screen 802 1x When connecting network you can choose whether using 802 1x protocol and then install the certification 1 From the Setup menu select the lt Network IF gt tab 2 Click lt 802 1x gt 3 Set the lt IEEE 802 1x setting EAPOL using EAP TLS gt e Enable IEEE 802 1x Specify the use of the 802 1x protocol e EAPOL version Select version 1 or 2 e D Enter the client certificate ID e Password Enter the client private key password If the key file used is not encrypted you don t need to enter it a m f the connected network device does not support the 802 1x protocol the protocol will not operate properly even if you set it 4 Install remove the certificate e CA certificates S
162. rs alarm event if becomes Open circuit status Set the alarm output button e Mode Sets the alarm output method There is difference between operations when clicked alarm output button while disabled Pulse It is activated during the time period specified by the duration Switching interval and then becomes inactive automatically Active Inactive It maintains as activated until the user clicks the button again to make it inactive e Duration Set the alarm duration that maintains activated if the mode is set to pulse from 1 to 15 seconds When done click Apply English _115 Setup screen SYSTEM SETUP Product information 1 From the Setup menu select the lt System J gt tab 2 Click lt Product information gt 3 Check the camera information or provide details according to your network environment e Model Model name of the product e Serial number Product serial number e Device name Provide a device name that will be displayed on the Live screen e Location Specify the location where the camera is installed e Description Provide detailed information about the camera location e Memo Provide an explanation about the camera for better understanding e Language Select a preferred language for the Web Viewer OSD 4 The default language is set to lt English gt 4 When dore click Apply 116_ setup screen Date amp Time 1 From the Se
163. s License shall be subject to the jurisdiction of the Federal Courts of the Northern District of California with venue lying in Santa Clara County California with the losing party responsible for costs including without limitation court costs and reasonable attorneys fees and expenses The application of the United Nations Convention on Contracts for the International Sale of Goods is expressly excluded Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this License 12 RESPONSIBILITY FOR CLAIMS As between Initial Developer and the Contributors each party is responsible for claims and damages arising directly or indirectly out of its utilization of rights under this License and You agree to work with Initial Developer and Contributors to distribute such responsibility on an equitable basis Nothing herein is intended or shall be deemed to constitute any admission of liability 13 MULTIPLE LICENSED CODE Initial Developer may designate portions of the Covered Code as Multiple Licensed Multiple Licensedmeans that the Initial Developer permits you to utilize portions of the Covered Code under Your choice of the MPL or the alternative licenses if any specified by the Initial Developer in the file described in Exhibit A EXHIBIT A Mozilla Public License The contents of this file are subject to the Mozilla Public License Version 1 1 the License
164. s in operated mode when the alarm occurs m If set to lt Always gt the activation time cannot be changed e Only scheduled time Check if an alarm occurs at a specified day of the week for a specified time period It activates in operated mode when the alarm occurs e Clear EEJ Reset all settings 7 Specify an operation that will perform if an alarm occurs e FIP Specify the use of FTP transfer in the alarm input setup e E mail Specify the use of email transfer in the alarm input setup e Record Specify the use of recording in the alarm input setup e Alarm output Select whether to set the alarm output if an alarm is incoming and specify the alarm output time 8 When done click Apply BEEZ English _103 N3JJY0S dNLIJS Setup screen Time schedule You can set to save the video data at a certain interval as scheduled regardless of the actual occurrence of the event 1 From the Setup menu select the lt Event F gt tab 2 Click lt Event setup gt 3 Select lt Time schedule gt from lt Event action setup gt 4 Set whether or not to lt Enable gt 5 Specify the lt Transfer interval gt 6 Specify the lt Activation time gt e Always Always activates in operated mode at the set interval e Only scheduled time Periodically activates in operated mode at a specified time and date 7 Specify the activation conditions e FIP Specify the use of the FTP transfer if a
165. s of the Software THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE The Independent JPEG Group s JPEG Software The software included in this product contains copyrighted software that is licensed under the JPEG license e JPEG license Code project Generating Outline OpenGL Libjpeg This distribution contains the sixth public release of the Independent JPEG Group s free JPEG software You are welcome to redistribute this software and to use it for any purpose subject to the conditions under LEGAL ISSUES below Serious users of this software particularly those incorporating it into larger programs should contact IJG at jpeg info uunet uu net to be added to our electronic mailing list Mailing list members are notified of updates and have a chance to participate in technical discussions etc This software is the work of Tom Lane Philip Gladstone Jim Boucher Lee Crocker Julian Minguillon Luis Ortiz George Phillips Davide Rossi Guido Vollbeding Ge Weijers and other members of the Independent JPEG Group
166. s on its axis is called Rotation The effective range of pan is a total of 355 degrees The effective range of rotation is a total of 355 degrees The effective range of tilt is a total of 90 degrees In some angles the top cover may cause cutting some part of the monitoring object Do not rotate the focus zoom lens by force after removing the cover front Otherwise it may cause an incorrect focus due to a motor failure Methods of adjustment 1 After installing the camera adjust the panning angle in consideration of the monitoring direction When tilting the camera you should adjust the horizontal angle lest that the image be displayed reversely 2 Adjust the rotation angle to correct the image display position up down left right Rotation means rotation on the basis of the rear lens unit 3 Adjust the tilt angle so that the camera faces toward the monitoring object 38_ installation amp connection INSERTING REMOVING A SD MEMORY CARD w Disconnect the power cable from the camera before inserting the SD memory card Inserting a SD Memory Card Loosen the screw and open the cover of the SD memory card Insert the SD card in the arrow direction as shown AUDIO OUT AUDIO IN SYSTEM POWER G FOCUS RESET 7 NOILOJNNOO 8 NOLLVTIVLSNI LINK tA DC tay lt SNB 7002 gt Push the SD memory card in the direction of the arrow shown in the diagram lt SND 7082 gt English _39 Ins
167. s to 65535 is not allowed by security policy Device port Set a port used to transfer video signals with the Samsung protocols RTSP port Used to transfer videos in the RTSP mode the default is 554 Web streaming port Used to transfer videos to the Web Viewer the default is 4520 Silverlight policy port Silverlight is used to permit to acquire a network connection the default is 943 f changed the HTTP port the browser exits Afterwards address should contain the newly assigned HTTP port trailing the IP ex IP address 192 168 1 100 HTTP port Assigned 8080 hitp 192 168 1 100 8080 If HTTP port is set to 80 no need to specify the port number The port range of the Web Streaming is between 4502 and 4534 If the Device port is with this effective range the Web Streaming port should be specified the same as the Device port You cannot change the Web Streaming Silverlight policy server port of a camera 4 When done click Apply 92_ setup screen DDNS DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easily remember it 1 From the Setup menu select the lt Network IF gt tab 2 Click lt DDNS gt 3 Select the lt DDNS gt connection type 4 Type in the DDNS items according to the selected type e Samsung DDNS Select this if you use the DDNS server provided by Samsung Techwin Pro
168. sers can access cameras within a Broadband Router s network by using the camera s DDNS URL 1 Before you can access a camera in the Broadband Router network you should have set the port range forward for the Broadband Router 2 From the remote PC launch the Internet browser and type the DDNS URL address of the camera or the IP address of the Broadband Router in the address bar ex http Awww samsungipolis com Product ID 4 For registering the DDNS settings refer to Registering with DDNS page 94 62_ network connection and setup web viewer CONNECTING TO THE CAMERA Normally you would 1 Launch the Internet browser _ ii 7 Al Aintree 2 Type the IP address of the camera in the address bar ex IP address IPv4 192 168 1 100 gt http 192 168 1 100 the Login dialog should appear RR e IP address IPv6 2001 230 abcd age VTA Va P ie ee ffff 0000 0000 fff 1111 4 3 gt http 2001 230 abcd ffff 0000 0000 ffff 1111 the Login dialog should appear agaMJlI GAM _ Tris m pee If the HTTP port is other than 80 1 Launch the Internet browser 2 Type the IP address and HTTP port number of the camera in the address bar ex IP address 192 168 1 100 HTTP Port number 8080 gt http 192 168 1 100 8080 the Login dialog should appear Using URL 1 Launch the Internet browser 2 Type the DDNS URL of the camera in the address bar ex URL address http www s
169. t modification are permitted provided that the following conditions are met yy Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer yy Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution yy The name of Fabasoft R amp D Software GmbH amp Co KG or any of its subsidiaries brand or product names may not be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Part 8 Apple Inc copyright notice BSD Copyright c 2007 Apple Inc All rights reserved Redistr
170. table version or via an accepted Electronic Distribution Mechanism to anyone to whom you made an Executable version available and if made available via Electronic Distribution Mechanism must remain available for at least twelve 12 months after the date it initially became available or at least six 6 months after a subsequent version of that particular Modification has been made available to such recipients You are responsible for ensuring that the Source Code version remains available even if the Electronic Distribution Mechanism is maintained by a third party 3 3 Description of Modifications You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to create that Covered Code and the date of any change You must include a prominent statement that the Modification is derived directly or indirectly from Original Code provided by the Initial Developer and including the name of the Initial Developer in a the Source Code and b in any notice in an Executable version or related documentation in which You describe the origin or ownership of the Covered Code 3 4 Intellectual Property Matters a Third Party Claims If Contributor has knowledge that a license under a third party s intellectual property rights is required to exercise the rights granted by such Contributor under Sections 2 1 or 2 2 Contributor must include a text file with the Source Code distribution titled LEGAL
171. tallation amp connection lt SND 7082F gt lt SNV 7082 gt m Do not insert the SD memory card while it s upside down by force Otherwise it may damage the SD memory card 40_ installation amp connection Removing a SD Memory Card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot AUDIOOUT AUDIO IN SYSTEM POWER G G FOCUS RESET NETWORK INK ox L 4 rw lt SNB 7002 gt lt SND 7082 gt English _41 NOILOANNODO 8 NOLLVTIVLSNI Installation amp connection lt SND 7082F gt lt SNV 7082 gt cH Pressing too hard on the SD memory card can cause the card to shoot out uncontrollably from the Slot when released To remove the SD memory card set the card to lt Off gt in lt Storage gt menu and press Apply EEM button Page 102 Removing the SD memory card while it s in use for saving may damage the data stored in the card 42_ installation amp connection MEMORY CARD INFORMATION NOT INCLUDED What is a memory card The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video audio and text data using digital devices Selecting a memory card that s suitable for you Your camera supports SD SDHC memory cards You may however experience compatibility issues depending on the model and mak
172. ternal Remote PC Camera DDNS Server J Data Center KOREA lt Local Network gt 4 A remote PC in an external Internet out of the LAN network may not be able to connect to the camera installed in the intranet if the port forwarding is not properly set or a firewall is set In this case to resolve the problem contact your network administrator By factory default the IP address will be assigned from the DHCP server automatically If there is no DHCP server available the IP address will be set to 192 168 1 100 To change the IP address use the IP Installer For further details on IP Installer use refer to Static IP Setup Page 55 50_ network connection and setup CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL CABLE MODEM SAMSUNG Camera External Remote PC DDNS Server Data Center KOREA 1 Use the cross LAN cable to connect the network cable directly to your PC dN13S ANY NOILOANNOO MYOMLAN N Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet Use the Internet browser to connect to the web viewer Move to Setup page Move to Network DDNS and configure the DDNS settings Move to Network Interface and set the network type to DHCP Connect the camera which was removed from your PC directly to the modem CON DO OO FB OW Restart the camera
173. the maximum and minimum detection size appropriately to objects to be detected Detected size of an object may have difference with the actual size according to its shape Up to 16 objects from the top side of the screen can be displayed If camera is capturing a close object the video analysis capability may degrade In the following cases motion detection and intelligent video analysis function may be degraded or Cause improper detection The object color or brightness is similar to the background Small activities around the border area of the camera s field of view Multiple movements continue occurring at random due to a scene change rapid lighting changes or other reasons A fixed object continues moving in the same position Motions of less position changing such as approaching to the camera or fading away from the camera Moving object approaches to the camera too close An object hides other objects behind Two or more objects overlap or one object divides in multiple portions Too fast object for a proper detection one object should be found overlapping between contiguous frames Reflection blur shadow due to a strong light such as direct sunlight illumination or headlamp In severe snow rain wind or in dawn dusk English _107 N3aYOS dNLAS Setup Screen To use Motion detection It detects a motion that meets all conditions specified by sensitivity size and area 1 Select a motion detectio
174. the origin of that material or requiring that modified versions of such material be marked in reasonable ways as different from the original version or d Limiting the use for publicity purposes of names of licensors or authors of the material or e Declining to grant rights under trademark law for use of some trade names trademarks or service marks or f Requiring indemnification of licensors and authors of that material by anyone who conveys the material or modified versions of it with contractual assumptions of liability to the recipient for any liability that these contractual assumptions directly impose on those licensors and authors All other non permissive additional terms are considered further restrictions within the meaning of section 10 If the Program as you received it or any part of it contains a notice stating that it is governed by this License along with a term that is a further restriction you may remove that term If a license document contains a further restriction but permits relicensing or conveying under this License you may add to a covered work material governed by the terms of that license document provided that the further restriction does not survive such relicensing or conveying If you add terms to a covered work in accord with this section you must place in the relevant source files a statement of the additional terms that apply to those files or a notice indicating where to find the
175. the sharpness of the image e Sharpness level The higher the level is the sharper and clearer the outline of the image becomes e Gamma Adjust the contrast of the image e Color level Adjust the color level of the image e Alarm in Set the image to Color or B W depending on the Open Close state of the alarm sensor a f the Day amp Night mode is set to Externe B W the alarm in function of the event alarm input page will be disabled N3JJY0S dNLAsS OSD Setup 1 Select lt OSD gt 2 Select each item and set it properly e Camera title Specify whether or not to display the camera title on the screen You can enter up to 15 characters for the title e Camera title position X Y Specify the coordinates where the camera title is displayed on the screen Time OSD Setup 1 Select lt Time OSD gt 2 Select each item and set it properly e Time display Specify the use of time display on the screen e Date format Specify the date format that will be displayed on the screen e Time position display X Y Specify the position of time display on the screen e Display weekday Specify the use of date display date on the screen English _87 Setup screen Smart codec setup Set a desired area of the video incoming from the camera as ROI area and specify the detection sensitivity for the area 1 From the Setup menu select the lt Video amp Audio EJ gt tab 2 Click lt Smart
176. the top cover from the case by URAL Lf it Zo Je a referring to the Disassembling section CD f ae wee EA al Z r page 34 is vy WY the camera and one for the screw 5 mm in 7 ee Lp diameter at least 35 mm in depth and insert the plastic anchor HUR 5 to the end of the screw hole lest that they should be damaged or twisted while installing the camera English _35 Installation amp connection 4 Loosen and remove the case fixing screws on the camera unit x3 5 Insert the camera unit into the hole so that it fits to the camera hole and fix the unit using the ASSY tapping screws TH M4xL30 x3 6 Adjust the lens in a desired direction by referring to the Adjusting the monitoring direction for the camera section page 38 7 Close the top cover To ensure waterproofing tight up the fixing bolts using the L wrench Attaching to the unbundled adapter Choose and purchase a necessary one of the following options unbundled that is suitable to the installation site or for your convenience 1 Remove the top cover from the case by referring to the Disassembling section page 34 2 Use the provided machine screw to fix the camera case to the unbundled adapter 3 Connect and arrange the necessary cables lest that they should be damaged or twisted while installing the camera 4 Install the camera body in the reverse order of Disassembling page 34 5 Adjust the lens in
177. third parties with this License 11 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot istribute so as to satisfy simultaneously your obligations nder this License and any other pertinent obligations then as a consequence you may not distribute the Library at all For example if a patent license would not permit royalty free redistribution of the Library by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system
178. ties for you if you distribute copies of the software or if you modify it For example if you distribute copies of such a program whether gratis or for a fee you must give the recipients all the rights that you have You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights We protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distribute and or modify the software Also for each author s protection and ours we want to make certain that everyone understands that there is no warranty for this free software If the software is modified by someone else and passed on we want its recipients to know that what they have is not the original so that any problems introduced by others will not reflect on the original authors reputations Finally any free program is threatened constantly by software patents We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses in effect making the program proprietary To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all The precise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION Version 2 June 1991 Copyright C 1989 1991 Free Software Foun
179. to a DHCP Based DSL Cable Modem Connecting the Camera Directly to a PPPoE Modem Connecting the Camera to a Broadband Router with the PPPoE Cable Modem Buttons used in IP Installer Static IP Setup Dynamic IP Setup Port Range Forward Port Mapping Setup Connecting to the Camera from a Shared Local PC Connecting to the Camera from a Remote PC via the Internet English _7 overview 8_ overview WEB VIEWER SETUP SCREEN APPENDIX 63 64 65 69 70 72 73 75 75 91 100 116 123 129 133 135 Connecting to the Camera Login Installing Silverlight Runtime Installing STW WebViewer Plugin Using the Live Screen Search and play by event Search and play by time Setup Video amp Audio Setup Network Setup Event Setup System Setup Specification Product Overview Troubleshooting Open Source Announcement PRODUCT FEATURES Full HD Video Quality Multi Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs Web Browser based Monitoring Using the Internet web browser to display the image in a local network environment Alarm If an event occurs the event related video will be transferred to the FTP email specified by the user or saved to the SD memory or the event signal will be sent to the Alarm Out port Tampering Detection Detects tempering attempts on video monitoring Motion Detection Detects motion from the cam
180. tup menu select the lt System J gt tab 2 Click lt Date amp Time gt 3 Specify the time and date that will be applied to the camera e Current system time Displays the current time settings of your system e Timezone Specify the local time zone based on the GMT e Use daylight saving time If checked the time will be set one hour before the local time zone for the specified time period This option will be displayed only in areas where DST is applied e System time setup Specify the time and date that will be applied to your system Manual Specify the time manually Synchronize with NTP server Sync with the time of the specified server address Synchronize with PC viewer Sets to the time of the computer connected 4 When done click Apply EEE I N3JY0S dNLIJS i f you select the lt Synchronize with PC viewer gt the standard timezone should be set the same as the current timezone in PC English _117 Setup screen User 1 From the Setup menu select the lt System J gt tab 2 Click lt User gt 3 Provide the necessary user information e Administrator password change Change the password for the administrator The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product Note that the security and other related issues caused by the unchanged password shall be responsible for the
181. ualify to receive new licenses for the same material under section 10 9 Acceptance Not Required for Having Copies You are not required to accept this License in order to receive or run a copy of the Program Ancillary propagation of a covered work occurring solely as a consequence of using peer to peer transmission to receive a copy likewise does not require acceptance However nothing other than this License grants you permission to propagate or modify any covered work These actions infringe copyright if you do not accept this License Therefore by modifying or propagating a covered work you indicate your acceptance of this License to do so 10 Automatic Licensing of Downstream Recipients Each time you convey a covered work the recipient automatically receives a license from the original licensors to run modify and propagate that work subject to this License You are not responsible for enforcing compliance by third parties with this License An entity transaction is a transaction transferring control of an organization or substantially all assets of one or subdividing an organization or merging organizations If propagation of a covered work results from an entity transaction each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party s predecessor in interest had or could give under the previous paragraph plus a right to possession of the Corresponding So
182. ublished by the Free Software Foundation If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 15 16 BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE LIBRARY TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE LIBRARY AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU SHOULD THE LIBRARY PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT
183. up screen appears i Microsoft Sliverlight 4 0 is required to be installed on the PC for setup pages that provide preview video If not installed already automatically moves to the Sliverlight setup VIDEO amp AUDIO SETUP Video profile 1 From the Setup menu select the lt Video amp Audio Ej gt tab 2 Click lt Video profile gt 3 Set the lt Megapixel Mode gt Changing the mode selection displays a confirmation message regarding the resetting the video configurations Click OK to confirm the changing video settings 4 Set the lt Video profile connection policy gt e Keep connection when profile setting is changed Changing profile properties that is used by existing connection does not affect such connection and remains with old profile setup If not selected changing a profile used by an existing connection resets such connection 5 Select each profile properties English _75 N3aYOS dNLAS Setup screen 6 Click the input box of each item and enter select a desired value The context menu may differ depending on the selected codec type e Default profile If no profile is selected when using the Web Viewer the default video profile is applied e E mail FTP profile Video profile to be transferred to the specified email or FTP site Only the MJPEG codec can be set as the E mail FTP profile e Record profile This is the profile that is applied to video recording
184. urce of the work from the predecessor in interest if the predecessor has it or can get it with reasonable efforts You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License For example you may not impose a license fee royalty or other charge for exercise of rights granted under this License and you may not initiate litigation including a cross claim or counterclaim in a lawsuit alleging that any patent claim is infringed by making using selling offering for sale or importing the Program or any portion of it 11 Patents A contributor is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based The work thus licensed is called the contributor s contributor version A contributor s essential patent claims are all patent claims owned or controlled by the contributor whether already acquired or hereafter acquired that would be infringed by some manner permitted by this License of making using or selling its contributor version but do not include claims that would be infringed only as a consequence of further modification of the contributor version For purposes of this definition control includes the right to grant patent sublicenses in a manner consistent with the requirements of this License Each contributor grants you a non exclusive worldwide royalty free patent license under the contr
185. us has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped English _3 overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus To prevent injury this apparatus must be securely attached to the Wall ceiling in accordance with the installation instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature acc
186. versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies that a certain numbered version of the GNU General Public License or any later version applies to it you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation If the Program does not specify a version number of the GNU General Public License you may choose any version ever published by the Free Software Foundation If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used that proxy s public statement of acceptance of a version permanently authorizes you to choose that version for the Program Later license versions may give you additional or different permissions However no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version 15 Disclaimer of Warranty THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
187. which no detection will be performed English _105 Setup screen Motion detection Video analytics Events of motion detection and video analysis can be set to trigger event signal output 1 From the Setup menu select the lt Event F gt tab 2 Click lt Event setup gt 3 Select lt Motion detection Video analytics gt from lt Event action setup gt 4 Set whether or not to lt Enable gt 5 According to your purpose select from motion detection and intelligent video analysis 6 Set lt Sensitivity gt lt Size gt and lt Area gt When selected Intelligent Video Analysis set lt Analytics gt too 7 Set whether to use lt Detection result overlay gt When a motion is detected its size and position is marked with a rectangle on the screen e Green All targets detected as moving e Red All targets detected as passing entering or exiting Colored marking remains for 1 2 seconds e Blue All targets detected as Appear Disappear event Colored marking remains for 3 5 seconds 8 Specify the activation time and activation condition For more information about lt Activation time gt and lt Action gt refer to Alarm input page 103 9 When done click Apply 106_ setup screen Motion detection and Video analytics cannot be used simultaneously Before using set the minimum and maximum motion sizes to suit desired motion range to be detected Set
188. y Neither the name of the Sun Microsystems Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Part 5 Sparta Inc copyright notice BSD Copyright c 2003 2009 Sparta Inc All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met yy Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer yy Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer i
189. y with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense samsung Techwin cares for the environment at all product manufacturing stages and is taking measures to provide customers with more environmentally friendly products eco The Eco mark represents Samsung Techwin s devotion to creating environmentally friendly RoHS compliant products and indicates that the product satisfies the EU RoHS Directive Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposa
190. ying you these rights or asking you to surrender the rights Therefore you have certain responsibilities if you distribute copies of the software or if you modify it responsibilities to respect the freedom of others For example if you distribute copies of such a program whether gratis or for a fee you must pass on to the recipients the same freedoms that you received You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights Developers that use the GNU GPL protect your rights with two steps 1 assert copyright on the software and 2 offer you this License giving you legal permission to copy distribute and or modify it For the developers and authors protection the GPL clearly explains that there is no warranty for this free software For both users and authors sake the GPL requires that modified versions be marked as changed so that their problems will not be attributed erroneously to authors of previous versions Some devices are designed to deny users access to install or run modified versions of the software inside them although the manufacturer can do so This is fundamentally incompatible with the aim of protecting users freedom to change the software The systematic pattern of such abuse occurs in the area of products for individuals to use which is precisely where it is most unacceptable Therefore we have designed this version of the
191. your name as a Contributor to the notice described in Exhibit A You must also duplicate this License in any documentation for the Source Code where You describe recipients rights or ownership rights relating to Covered Code You may choose to offer and to charge a fee for warranty support indemnity or liability obligations to one or more recipients of Covered Code However You may do so only on Your own behalf and not on behalf of the Initial Developer or any Contributor You must make it absolutely clear than any such warranty support indemnity or liability obligation is offered by You alone and You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of warranty support indemnity or liability terms You offer 3 6 Distribution of Executable Versions You may distribute Covered Code in Executable form only if the requirements of Section 3 1 3 5 have been met for that Covered Code and if You include a notice stating that the Source Code version of the Covered Code is available under the terms of this License including a description of how and where You have fulfilled the obligations of Section 3 2 The notice must be conspicuously included in any notice in an Executable version related documentation or collateral in which You describe recipients rights relating to the Covered Code You may distribute the Executable version of Cov

Samsung SND-7082 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents