Samsung BD-F5700/ZA Product manual
Contents
1. L_ gt Broadband E service Broadband modem HDMI OUT Method 1 9 NOTES Internet access to Samsung s software update server may not be allowed depending on the router you use or your ISP s policy For more information contact your ISP Internet Service Provider DSL users please use a router to make a network connection DIGITALAUDIO IN HDMI IN COAXIAL Wireless Network Wireless Router Broadband service 9 NOTES If your wireless router supports DHCP this player can use a DHCP or static IP address to connect to the wireless network Set your wireless router to Infrastructure mode Adhoc mode is not supported The player supports only the following wireless security key protocols WEP OPEN SHARED WPA PSK TKIP AES WPA2 PSK TKIP AES Select a channel on the wireless router that is not currently being used If the channel set for the wireless router is currently being used by another device nearby it will result in interference and communication failure In compliance with the newest Wi Fi certification specifications Samsung Blu ray players do not support WEP or TKIP security encryption in networks running in the 802 11n mode Wireless LAN by its nature may cause interference depending on the operating conditions router performance distance obstacles interference by other radio devices etc settings e The2. gt Diawli 1 6 noo ME Jz Repeat Mode lt O gt iz Information 7 TRACK 004 2 00 08 05 57 03 41 03 17 TRACK 006 03 35 Pause Tools gt Return 2 Press the buttons to select Track All Shuffle or Off 3 Press the EJ button songs are played in the order an in which they were recorded CD Track The current song is repeated CD All All songs are repeated IC Shuffle Shuffle plays songs in random order 18 Playlist To move to the Music List press the J or RETURN button The Music List screen appears 1 2 Page 25 Music TRACK 001 TRACK 002 02 38 TRACK 004 02 38 TRACK 006 02 38 s TRACK 001 uw 02 38 TRACK 003 02 38 TRACK 005 02 38 a ve a i TRACK 007 02 38 TRACK 008 02 38 a lt _ TRACK 009 02 38 TRACK 010 02 38 i E Select Jump Page gt Return oO o Press the AV lt P buttons to move to a desired track and then press the YELLOW C button A check appears on the track Repeat this procedure to select additional tracks To remove a track from the list move to the track and then press the YELLOW C button again The check on the track is cancelled When done press the fE button The tracks you selected are displayed on the right side of th
3. NOT ALL discs are compatible e Subject to the restrictions described below and those noted throughout this Manual including the Disc Type and Characteristics section of this user manual disc types that can be played are pre recorded commercial BD ROM DVD VIDEO and Audio CD CD DA discs BD RE R DVD RW R discs and CD RW R discs e Discs other than those listed above cannot be and are not intended to be played by this player Some of the discs listed above may not play due to one or more reasons provided below e Samsung cannot assure that this player will play every disc bearing the BD ROM BD RE R DVD VIDEO DVD RW R DVD RW R and CD RW R logos and this player may not respond to all operating commands or operate all features of every disc These and other disc compatibility and player operation issues with new and existing format discs are possible because Blu ray is anew and evolving format and this player may not operate all features of Blu ray Discs because some features may be optional additional features may have been added to the Blu ray Disc format after the production of this player and certain available features may be subject to delayed availability not all new and existing disc format versions are supported by this player new and existing disc formats may be revised changed updated improved and or supplemented some discs are produced in a manner that allows specific or limited operation or restricts
4. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio or television reception which can be determined by turning the equipment off and on The user is encouraged to try to correct the interference by one or more of the following measures Note to CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the National Electrical Code Section 54 of Canadian Electrical Code Part that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical 2 CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure Complies with 21CFR 1040 10 except for deviations pursuant to Laser Notice No 50 dated June 24 2007 DANGER e VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE T
5. Home screen will not appear if you do not configure the initial settings e The OSD On Screen Display may change in this player after you upgrade the software version e The access steps may differ depending on the menu you selected e After the initial settings process is complete you can then operate the panel buttons and remote control The Initial Settings Procedure appears when you turn on player for the first time and lets you set the OSD and menu languages configure the connection to your home network and choose the aspect ratio output screen size and format that is correct for your TV Follow the directions that appear on the screen 9 NOTES The Home menu will not appear if you do not configure the initial settings except as noted below f you press the BLUE D button during network setup you can access the Home menu even if the network setup is not completed yet When you return to the Home menu the full screen mode is cancelled automatically f you want to display the Initial Setting screen again to make changes press the mi button on the front panel of the player for more than 5 seconds with no disc inserted This resets the player to its default settings After the initial settings process is complete you can operate the HDMI CEC function f you want to use the Anynet HDMI CEC function to aid in the initial set up process please follow the instructions below 1 Connect the pla
6. User Manual Remote Control AAA Size 4301 000121 AK68 02285U AK59 00172A COAXIAL DIGITAL AUDIO OUT HDMI OUT LAN DIGITAL AUDIO OUT Remote Control C onnections Tour of the Remote Control c tina to a TV onnecting to a Connect an HDMI cable not supplied from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV Do not connect the power cord to the wall outlet until you have made all the other connections When you change the connections turn off all devices before you start Turn the player on and off Turn the TV on and off After setup allows you to set the input source on your TV Press to open and close the disc tray TV volume adjustment Press the number buttons to operate options Use to enter the disc menu Use to enter the popup menu title menu Press to search a disc backwards or forwards Press to pause a disc Press to skip backwards or forwards Press to stop a disc Press to play a disc Press to move to the Home menu Press to switch the Blu ray Disc DVD s subtitle language Use to access various audio functions on a disc Blu ray Disc DVD Press to use the Tools menu Use to display the playback information when playing a Blu ray Disc DVDs Use to select menu items and change menu values Press to exit the menu Press to backlight the buttons on the remote Return to the previous menu amp NOTES These buttons are used bo
7. and then press the EJ button 4 Select Wireless in the Network Settings screen and then press the button The player searches for and then displays a list of the available networks 5 Select the desired network and then press the gt button 6 Select the WPS PIN and then press the EJ button The PIN pop up appears 7 Enter the PIN into the WPS PIN entry field in the router s Set Up screen and then save the the screen amp NOTES Contact the manufacturer of the router for instructions explaining how to access the route s Set Up screens or refer to the router s user s manual For WPS connection set your wireless router s security encryption to AES Setting to WEP security encryption does not support WPS connection Network Test Use this menu item to check whether your network connection is working or not Network Status Use to check whether a connection to a network and the Internet has been established BD Live Internet Connection Set to allow or prohibit an Internet connection when you use the BD LIVE service e Allow All The Internet connection is allowed for all BD LIVE contents e Allow Valid Only The Internet connection is allowed only for BD LIVE contents containing a valid certificate e Prohibit No Internet connection is allowed for any BD LIVE content 9 NOTES What is a valid certificate When the player uses BD LIVE to send the disc data and a request to the
8. fE button 5 Press the EXIT button to exit the menu 10 amp NOTES The access steps may differ depending on the menu you selected The OSD On Screen Display may change in this player after you upgrade the software version Display Settings You can configure various display options such as the TV Aspect Ratio Resolution etc TV Aspect Ratio Depending on the type of television you have you may want to adjust the screen size setting amp NOTES Depending on the disc type some aspect ratios may not be available f you select an aspect ratio and option which is different than the aspect ratio of your TV screen the picture might appear to be distorted BD Wise Samsung TVs only BD Wise is Samsung s latest inter connectivity feature When you connect a Samsung player and a Samsung TV with BD Wise to each other via HDMI and BD Wise is on in both the player and TV the player outputs video at the video resolution and frame rate of the Blu ray Disc DVDs 9 NOTES When BD Wise is on the Resolution setting automatically defaults to BD Wise and BD Wise appears in the Resolution menu f the player is connected to a device that does not support BD Wise you cannot use the BD Wise function For proper operation of BD Wise set the BD Wise menu of both the player and the TV to On Resolution Lets you set the output resolution of the HDMI video signal to Auto 1080p 1080i 720p or 480p The
9. features during playback some discs bearing the BD ROM BD RE R DVD VIDEO DVD RW R DVD RW R and CD RW R logos may still be non standardized discs some discs may not be played depending on their physical state or recording conditions problems and errors can occur during the creation of Blu ray Disc or DVD software and or the manufacture of discs this player operates differently than a standard DVD player or other AV equipment and or for reasons noted throughout this user manual and for other reason s discovered and posted by SAMSUNG customer care center e f you encounter disc compatibility or player operation problems please contact SAMSUNG customer care center You may also contact SAMSUNG customer care center for possible updates on this player e For additional information on playback restrictions and disc compatibility refer to the Precautions Before Reading the user manual Disc Types and Characteristics and Before Playing sections of this user manual e For Blu ray Disc Player progressive scan output CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE IN CASE OF PROGRESSIVE SCAN PICTURE PROBLEMS IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product PLEASE CONTACT OUR CUSTOMER SERVICE CEN
10. may not modify copy republish upload post transmit translate sell create derivative works exploit or distribute in any manner or medium any content or services displayed through this device THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS SAMSUNG DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED EITHER EXPRESSLY OR IMPLIEDLY FOR ANY PURPOSE SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SAMSUNG DOES NOT GUARANTEE THE ACCURACY VALIDITY TIMELINESS LEGALITY OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE SHALL SAMSUNG BE LIABLE WHETHER IN CONTRACT OR TORT FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES ATTORNEY FEES EXPENSES OR ANY OTHER DAMAGES ARISING OUT OF OR IN CONNECTION WITH ANY INFORMATION CONTAINED IN OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Third party services may be terminated or interrupted at any time and Samsung makes no representation or warranty that any content or service will remain available for any period of time Content and services are transmitted by third parties by means of networks and transmission facilities over which Samsung has no control Without limiting the generality of this disclaimer Samsung expr
11. port on the front panel of the player The message Do you want to access the device is displayed Press the lt gt button to select Yes and then press the J button If you have a disc in the Blu ray player press the RED A or BLUE D button If you do not go to Step 6 If you pressed the RED A button go to Step 5 If you pressed the BLUE D button go to Step 57 Press the A V buttons to select USB and then press the EJ button Press the lt gt buttons to select Videos Music or Photos and then press the button Go to Step 7 Press the lt P buttons to select USB then press the EJ button NETFLIX Press the A Y buttons to select Videos Music or Photos and then press the button A screen appears listing the contents ofthe device Depending on how the contents are arranged you will see either folders individual files or both If necessary use the A Y lt gt buttons to select a folder and then press the button 9 Use the lt gt AV buttons to select a file to view or play and then press the button 9 NOTES 10 11 Even though the player will display folders for all content types it will only display files of the Content Type you selected in Step 6 or Step 6 1 For example if you selected music you will only be able to see music files You can change this selection by returning to the Home screen and following the directions from Step 4 Press the RETU
12. returning to the Home screen and repeating Step 2 3 A screen appears listing the contents of the disc Depending on how the contents are arranged you will see either folders individual files or both 4 f necessary use the A Y lt P buttons to select a folder and then press the button 5 Use the lt b AY buttons to select a file to view or play and then press the button 6 Press the RETURN button one or more times to exit a current screen exit a folder or to return to the Home screen Press the EXIT button to return directly to the Home Screen 7 Goto pages 17 18 for instructions that explain how to control playback of videos music and pictures on a disc Playing Content Located in Your PC To play content located in your PC on your Blu ray disc player you must connect the Blu ray player to you network See pages 12 13 and install DLNA Software on your PC To Play Content From Your PC 1 Goto the Home Menu 2 Press the BLUE D button on your remote Device 3 In the Device screen that appears select your PC and then press the J button 4 Usethe lt gt buttons to select the type of content you want to view or play Videos Photos or Music and then press the amp button amp NOTES Even though the player will display folders for all content types it will only display files of the Content Type you selected in Step 4 For example if you selected music you will only b
13. BD F5700 Slu ray Disc Player user manual imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register ENGLISH safety Information TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER OR BACK NO USER SERVICEABLE PARTS ARE INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within the CAUTION TO REDUCE THE RISK OF The exclamation point within the triangle triangle is a warning sign alerting you to ELECTRIC SHOCK DO NOT REMOVE THE is a warning sign alerting you to important dangerous voltage inside the product COVER OR BACK NO USER SERVICEABLE instructions accompanying the product PARTS ARE INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL WARNING e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect this equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This class B digital product meets all requirements of the Canadian Interference Causing Equipment Regulations e To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture FCC NOTE for U S A
14. Code or Pass Phrase Enter numbers directly using the number buttons on your remote control Enter letters by selecting a letter with the AY lt P buttons and then pressing the button 11 When finished select Done at the right of the screen and then press the S button The player verifies the network connection and then connects to the network 12 After the player verifies the network select OK and then press the button a WPS PBC 1 In the Home screen select Settings and then press the EJ button 2 Select Network and then press the button 3 Select Network Settings and then press the EJ button 4 Select Wireless in the Network Settings screen and then press the J button 5 Press the A button on your remote and then press the gt button to select the WPS PBC 6 Press the J button on your remote The Press the PBC button message appears 7 Press the WPS PBC button on your router within two minutes Your player automatically acquires all the network settings values it needs and connects to your network The Network Status screen appears The player connects to the network after the network connection is verified a WPS PIN Before you begin open the router s setup menu on your PC and access the screen with the WPS PIN entry field 1 Inthe Home screen select Settings and then press the EJ button 2 Select Network and then press the button 3 Select Network Settings
15. L PURCHASER OF THIS PRODUCT IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state To obtain warranty service please contact SAMSUNG customer care center QUESTIONS OR COMMENTS COUNTRY CALL OR VISIT US ONLINE AT WRITE Samsung Electronics America Inc IN THE US IN www samsung com 85 Challenger Road Ridgefield Park 726 7864 NJ 07660 2112 ENERGY STAR AK68 02285U
16. Menu IF the HDMI output is set to a resolution your TV cannot support for example 1080p you may not see a picture on your TV Press the MI button on front panel for more than 5 seconds with no disc inside All settings will revert to the factory settings When the factory default settings are restored all stored user BD data is deleted PROBLEM Forgot password The picture is noisy or distorted No HDMI output Abnormal HDMI output screen If you experience other problems DLNA function can see folders shared through DLNA but cannot see the files Video is played intermittently DLNA connection between Player and PC is unstable SOLUTION Press the ll button on front panel for more than 5 seconds with no disc inside All settings including the password will revert to the factory settings Don t use this unless absolutely necessary When the factory default settings are restored all stored user BD data is deleted Make sure that the disc is not dirty or scratched Clean the disc Check the connection between the TV and the HDMI jack of the player Check if your TV supports 480p 720p 1080i or 1080p HDMI input resolutions If random noise appears on the screen it means that TV does not support HDCP High bandwidth Digital Content Protection Go to the contents and find the section of the user manual that contains the explanations regarding the current problem and follow the procedur
17. NG 15360x8640 e This player can play back AVCHD format discs These discs are normally recorded and used PLAY PAUSE BUTTON in camcorders e The AVCHD format is a high definition digital video camera format STOP BUTTON e The MPEG 4 AVC H 264 format compresses images with greater efficiency than the conventional image compressing format e Some AVCHD discs use the x v Color format This player can play back AVCHD discs that use x v Color format e x v Color is a trademark of Sony Corporation POWER BUTTON e AVCHD and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co Ltd and Sony Corporation 9 NOTES Some AVCHD format discs may not play depending on the recording condition AVCHD format discs need to be finalized x v Color offers a wider color range than normal DVD camcorder discs Some MKV and MP4 format discs may not play depending on the video resolution and frame rate condition Accessories REMOTE CONTROL SENSOR DISC TRAY Check for the supplied accessories shown below Ss NOTES When the player displays the Blu ray Disc menu you cannot start the movie by pressing the Play button on the player or the remote To play the movie you must select Play Movie or Start in the disc menu and then press the EJ button OPEN CLOSE BUTTON You can perform software upgrades using the USB Host jack with a USB flash memory stick only ats Rear Panel Batteries for Remote Control
18. O BEAM FDA 21 CFR CAUTION e CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO THE BEAM IEC 60825 1 e THIS PRODUCT UTILIZES A LASER USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL CLASS 1 KLASSE 1 LUOKAN 1 LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT L SER CLASE 1 KLASS 1 PRODUCTO amp NOTES f the Region number of a Blu ray Disc DVDs does not correspond to the Region number of this player the player cannot play the disc Precautions Important Safety Instructions Read these operating instructions carefully before using the unit Follow all the safety instructions listed below Keep these operating instructions handy for future reference Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth ee eS S SY E Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including AV receivers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wi
19. PTP protocol Do not disconnect a USB device during a loading process The bigger the image resolution the longer the image takes to display This player cannot play MP3 files with DRM Digital Rights Management downloaded from commercial sites Your player only supports video with a frame rate under 30fps frames per second Your player only supports USB Mass Storage Class MSC devices such as thumb drives and USB HDD HUB is not supported Certain USB HDD Devices multi card readers and thumb drives may not be compatible with this player If some USB devices require excessive power they may be limited by the circuit safety device e f playback from a USB HDD is unstable provide additional power by plugging the HDD into a wall socket If the problem continues contact the USB HDD manufacturer e You must remove the USB storage device safely by performing the Safely Remove USB function to prevent possible damage to the USB memory Press the HOME button to move to the home screen press the YELLOW C button and then press the J button e SAMSUNG is not responsible for any data file damage or data loss e Your player does not support NTFS compressed files sparse files or encrypted files e You can repair or format a USB device on your Desktop PC MS Windows OS only Video File Support File Extension Video Codec Audio Codec Resolution MP3 MP4v3 pcb acl 1920x1080 avi DTS WMA 1920x1080 ae 264 ae dhe x
20. RN button one or more times to exit a current screen exit a folder or to return to the Home screen Press the EXIT button to return directly to the Home Screen The controls and tools you use to control and play videos music and pictures located on a USB device are identical to those you use to play videos music and pictures on a disc Go to pages 17 18 for instructions amp NOTES You must remove the USB storage device safely by performing the Safely Remove USB function in order to prevent possible damage to the USB memory Press the MENU button to move to the Home menu select the YELLOW C button and then press the button f you insert a disc when playing a USB storage device the device mode changes to Blu ray DVD or CD automatically Playing a Disc with User Recorded Content You can play multimedia files you have recorded on Blu ray DVD or CD discs 1 Place a user recorded disc into the disc tray with the disc s label facing up and then close the tray The Device Connected pop up appears 2 Usethe lt P buttons to select the type of content you want to view or play Videos Photos or Music and then press the amp button 9 NOTES Even though the player will display folders for all content types it will only display files of the Content Type you selected in Step 2 For example if you selected music you will only be able to see music files You can change this selection by
21. Setup that your TV will support When the factory default settings are restored all stored user BD data is deleted The Blu ray Disc must have the 24 frame feature for the player to use the Movie Frame 24Fs mode Movie Frame 24Fs Setting the Movie Frame 24Fs feature to Auto allows you to adjust the player s HDMI output to 24 frames per second for improved picture quality You can enjoy the Movie Frame 24Fs feature only on a TV supporting this frame rate You can select Movie Frame only when the player is in the HDMI 1080i or 1080p output resolution modes HDMI Color Format Lets you set the color space format for HDMI output to match the capabilities of the connected device TV monitor etc HDMI Deep Color Lets you output video from the HDMI OUT jack with Deep Color Deep Color provides more accurate color reproduction with greater color depth Progressive Mode Lets you improve picture quality when viewing DVDs Audio Settings Digital Output Lets you select the digital audio output format that is suitable for your TV or AV Receiver For more details please refer to the Digital Output Selection table below Digital Output Selection Bitstream SUS ED Setup PCM Re encoded Unprocessed DTS Connection ll Coaxial ad Coaxial UL GEC Receiver Receiver Coaxial Up to 7 1ch PCM 2ch PCM 2ch Re encoded DTS u C a PCM 2ch Dolby Digital Re encoded DTS DTS HD Master DTS HD POM 2c
22. TER Copy Protection e Because AACS Advanced Access Content System is approved as the content protection system for the Blu ray Disc format similar to use of CSS Content Scramble System for the DVD format certain restrictions are imposed on playback analog signal output etc of AACS protected contents The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and or changed by AACS after the production of this product Furthermore BD ROM Mark and BD are additionally used as content protection systems for the Blu ray Disc format which imposes certain restrictions including playback restrictions for BD ROM Mark and or BD protected contents To obtain additional information on AACS BD ROM Mark BD or this product please contact SAMSUNG customer care center e Many Blu ray Disc DVDs are encoded with copy protection Because of this you should only connect your Player directly to your TV not to a VCR Connecting to a VCR results in a distorted picture from copy protected Blu ray Disc DVDs e Under the U S Copyright laws and Copyright laws of other countries unauthorized recording use display distribution or revision of television programs videotapes Blu ray Discs DVDs and other materials may subject you to civil and or criminal liability e Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of so
23. VC 1 AP MP3 1920x1080 mk MKV Dolby Digital H 264 BP MP HP DTS 1920x1080 TAP 1920x1080 wmv WMV wmv9 cam TSM WMA 1920x1080 na MP4 mp4v 1920x1080 ay H264 BP MP HP_ 1920x1080 u MPEGI MPT 2 1920x1080 2 A e Dolby Digital 1920x1080 peg er ee 1 264 BP MP HP DTS 1920x1080 e Limitations Even when a file is encoded by a supported codec listed above the file might not be played if its content has a problem Normal playback is not guaranteed if the file s container information is wrong or the file itself is corrupted Files having a higher Bit rate frame rate than standard may stutter during sound video playback The Seek skip function is not available if the file s index table is damaged e Video decoder Supports up to H 264 Level 4 1 and AVCHD Does not support H 264 FMO ASO RS and VC1 SP MP AP L4 MPEG4 SP ASP Below 1280 x 720 60 frames max Above 1280 x 720 30 frames max Does not support GMC 2 or higher e Audio decoder Supports WMA 7 8 9 and STD Does not support WMA sampling rate of 22050Hz mono AAC Max sampling rate 96Khz 8 11 12 16 22 24 32 44 1 48 64 88 2 96 Max bitrate 320kbps Music File Support File Extension Audio Codec Support Range mp3 ee wma WMA j Sampling fales in KHz 8 11 16 22 32 44 1 48 Bit rates All bit rates from 5kbps to 355kbps Picture File Support File Extension Resolution jpg jpeg JPEG 15360x8640 pe png P
24. ayback 17 Playing Photo Contents 18 APPENDIX Troubleshooting ee 19 SIS CIMGAUION S near 20 Region Code Getting Started Disc Types and Contents your player can play Both players and discs are coded by region These regional codes must match for a disc to play If the codes do not match the disc will not play The Region Code for this player is displayed on the rear panel of the player Media Disc Type Details Disc Type pee Blu ray Disc BD ROM or BD RE R recorded in the BD RE format DVD VIDEO North America Central VIDEO DVD RW DVD VIDEO recorded DVD RW DVD RW V DVD R R that have Blu ray America South America DVD R been recorded and finalized or a USB storage media containing MKV Disc Korea Japan Taiwan Hong DVD RW or MP4 contents e a _ a _ DVD R DVD The U S U S territories and CD RW R Music recorded on CD RW R DVD RW R BD RE R or a USB ied Canada MUSIC DVD RW R a BD RE R storage media containing MP3 or WMA contents CD RW R Logos of Discs the player can play i Photos recorded on CD RW R DVD RW R BD RE R or a USB PHOTO DVD RW R s storage media containing JPEG contents BD RE R A a BD IVE Q NOTES Blu ray Disc ee TM The player may not play certain CD RW R and DVD R because of the disc type or recording conditions Blu ray Disc BD LIVE fa DVD RW R has not been recorded properly in DVD video format it will not be playable Your player will not play content that has
25. been recorded on a DVD R at a bit rate that exceeds 10 Mbps Your player will not play content that has been recorded on a BD R or USB device at a bitrate that exceeds 25 Mbps Playback may not work for some types of discs or when you use specific functions such as angle change and aspect ratio adjustment Information about the discs is written in detail on the disc box Please refer to this if necessary NTSC broadcast system in U S A Canada Korea Japan When you play a BD J title loading may take longer than a normal title or some functions may perform slowly Disc types your player cannot play e HD DVD e DVD RAM e DVD RW VR mode 3 9 GB DVD R for e DVD ROM PD e Super Audio CD e CVD CD ROM Authoring MV etc except CD layer CDV CD G CD I LD CD Gs play audio only not graphics 4 Supported File Formats Notes on the USB connection Your player supports USB storage media MP3 players digital cameras and USB card readers The player does not support folder or file names longer than 128 characters Some USB External HDD digital camera devices may not be compatible with the player Your player supports the FAT16 FAT32 and NTFS file systems Connect USB devices directly to the player s USB port Connecting through a USB cable may cause compatibility problems Inserting more than one memory device into a multi card reader may cause the reader to operate improperly The player does not support the
26. der than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where it exits the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over A 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as when the power supply cord or plug is damaged liquid has been spilled or objects have fallen into exposed to rain or moisture does not operate normally or has been dropped Disc Storage amp Management Fingerprints or scratches on a disc may reduce sound and picture quality Avoid touching the surface of a disc where data has been recorded Hold the disc by the edges so that Do not stick paper or tape on the disc e Cleaning Discs If you get fingerprints or dirt detergent diluted
27. e default PIN 0000 using the number buttons To change the PIN use the Change PIN function page 15 Each time you access the Security Settings hereafter you must enter that four digit PIN If you don t change the PIN continue using the default PIN BD Parental Rating Prevents playback of Blu ray Discs with specific age ratings unless the 4 digit PIN is entered DVD Parental Rating This function works in conjunction with DVDs that have been assigned an age rating or numeric rating that indicates the maturity level of the content These numbers help you control the types of DVDs that your family can watch Select the rating level you want to set For example if you select Level 6 discs rated above 6 Level 7 and 8 will not play A larger number indicates more mature content When the DVD Parental Rating function is on you must enter the 4 digit PIN to play discs with restricted rating levels Change PIN Change the 4 digit password used to access security functions To change the PIN follow these steps 1 Select Change PIN and then press the button The Enter old PIN screen appears 2 Enter the old PIN If you never changed the PIN enter the default PIN 0000 The Enter new PIN screen appears 3 Enter the new PIN in the Enter new PIN fields 4 Re enter the new PIN in the Confirm new PIN fields The PIN is changed successfully message appears 5 Press the J button If you forget your
28. e able to see music files You can change this selection by returning to the Home screen and repeating Step 4 5 A screen appears listing the contents on your PC Depending on how the contents are arranged you will see either folders individual files or both 6 If necessary use the A Y lt P buttons to select a folder and then press the button 7 Usethe lt b AV buttons to select a file to view or play and then press the button 8 Press the RETURN button one or more times to exit a current screen exit a folder or to return to the Home screen Press the EXIT button to return directly to the Home Screen 9 Goto pages 17 18 for instructions that explain how to control playback of videos music and pictures on a PC Controlling Video Playback You can control the playback of video content located on a Blu ray disc DVD CD USB device or you computer Depending on the media some of the functions described in this manual may not be available Buttons on the Remote Control used for Video Playback Playback related buttons The player does not play sound in Search Slow or Step mode e To return to normal speed playback press the D button C3 button Starts playback 3 button Stops playback E button Pauses playback During playback press the QJ or Fast Motion oe Play Each time you press the B or 3 button the playback speed will change In pause mode press the 9 F button en Auen Each time you
29. e once again If the problem still cannot be solved please contact your nearest Samsung authorized service center DLNAs shows only files corresponding to the Image Music and Movie categories Files that do not correspond to these categories are not displayed Check if the network is stable Check if the network cable is properly connected and if the network is overloaded The IP address under the same subnetwork should be unique If they are not IP interference can cause this phenomenon Check if you have a firewall enabled If so disable the firewall function 19 PROBLEM BD LIVE SOLUTION cannot connect to the BD e Check whether the network connection is working or not by using the LIVE server Network Status menu e Check whether the USB memory device is connected to the player e The memory device must have at least 1GB of free space to accommodate the BD LIVE service You can check the available size in BD Data Management e Check whether the BD LIVE Internet Connection menu is set to Allow All e fall above fails contact the contents provider or update the player to the latest firmware When using the BD LIVE e The memory device must have at least 1GB of free space to accommodate service an error Occurs the BD LIVE service You can check the available size in BD Data Management amp NOTES When the factory default settings are restored all stored user BD data is deleted Repairs If you co
30. e screen The player plays the first track To change the play list press the RETURN button to return to the Music List Repeat Steps 2 3 and 4 To cancel the play list and return to the Home screen press the RETURN or EXIT button amp NOTES You can create a playlist with up to 99 tracks on Audio CDs CD DA f you remove all the tracks from a play list and then press the button the player lists and plays all the tracks on the disc Playing Photo Contents You can control the playback of photo content located on a Blu ray disc DVD CD USB device or your computer Using the Tools Menu During playback press the TOOLS button Start Slide Show Select to start or stop the slide Stop Slide Show show Slide Show Speed Select to set a slide show s speed Background Select to listen to music while Music viewing a slide show Select to enlarge the current zu picture Enlarge up to 4 times Select to rotate the picture This Rotate will rotate the picture either clockwise or counter clockwise Information Shows the picture information 9 NOTES Depending on the disc or storage device the Tools menu may differ To enable the background music function the photo file must be in the same storage media as the music file However the sound quality can be affected by the bit rate of the MP3 file the size of the photo and the encoding method You can t enlarge the subtitle and PG grap
31. elated to noise echo interference or other signal transmission and delivery problems SAMSUNG does not warrant uninterrupted or error free operation of the product THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS OR ANY OTHER SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE MISUSE OR INABILITY TO USE THIS PRODUCT REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE WITHOUT LIMITING THE FOREGOING PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS DAMAGE OR INJURY TO PURCHASER AND PURCHASER S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINA
32. essly disclaims any responsibility or liability for any interruption or suspension of any content or service made available through this device Samsung is neither responsible nor liable for customer service related to the content and services Any question or request for service relating to the content or services should be made directly to the respective content and service providers 22 License Manufactured under license from Dolby Laboratories Dolby and the DOLBY double D symbol are trademarks of Dolby Laboratories TRUEHD Manufactured under license under U S Patent Nos 5 956 674 5 974 380 6 487 535 amp other U S and worldwide patents issued amp pending DTS the 2 0 Digital Out Symbol amp DTS and the Symbol together are registered trademarks amp DTS 2 0 Digital Out is a trademark of DTS Inc Product includes software DTS Inc All Rights Reserved The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Homi Oracle and Java are registered trademarks of Oracle and or its affiliates Other names may be trademarks of their respective owners lt _ lt Java POWERED Open Source License Notice Inthe case of using open source software Open Source Licenses are available on the product menu Blu ray Disc Blu ray and the logos are trademarks of the Blu ray Disc Associati
33. ettings values manually Follow Steps 1 and 2 in Wired Network and then follow these steps 1 Select Network Status The player searches for a network and then displays the connection failed message 2 On the bottom of the screen select IP Settings and then press the button The IP Settings screen appears 3 Select the IP Setting field and then press the EJ button 4 Select Enter manually in the IP Setting field and then press the button 5 Select a value to enter IP Address for example and then press the button Use the number keypad on your remote control to enter the numbers for the value You can also enter numbers using the A Y buttons Use the lt gt buttons on the remote control to move from entry field to entry field within a value When done with one value press the button 6 Press the A or Y button to move to another value and then enter the numbers for that value following the instructions in Step 5 7 Repeat Steps 5 and 6 until you have filled in all values NOTE You can get the Network values from your Internet provider 8 When finished entering all the values select OK and then press the button The player verifies the network connection and then connects to the network Wireless Network You can setup a wireless network connection in four ways Wireless Automatic Wireless Manual WPS PBC WPS PIN When you configure the wireless network connection a
34. h oe Dolby Diga DIS Decodes main feature Outputs only main feature Jaudio and BONUSVIEW Decodes main feature audio stream so that your audio stream together Hafinition tar audio and BONUSVIEW AV receiver can decode the into PCM audio Blu ray Disc Any audio stream together audio bitstream and add Navigation into PCM audio and add You will not hear BONUSVIEW Sound Effects then Navigation Sound Effects audio and Navigation Sound re encodes the Effects PCM audio into DTS bitstream If Source Stream is 2ch Re encoded Dolby D Settings are not applied Blu ray Discs may include three audio streams Main Feature Audio The audio soundtrack of the main feature BONUSVIEW audio An additional soundtrack such as the director or actor s commentary Navigation Sound Effects When you choose a menu navigation selection a Navigation Sound Effect may sound Navigation Sound Effects are different on each Blu ray Disc 9 NOTES Be sure to select the correct Digital Output or you will hear no sound or just loud noise f the HDMI device AV receiver TV is not compatible with compressed formats Dolby Digital DTS the audio signal outputs as PCM Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects Some Blu ray Discs do not have BONUSVIEW audio and Navigation Sound Effects f you play MPEG audio soundtracks the audio signal outputs as PCM regardless of your Digital Output
35. hic in the full screen mode Appendix Troubleshooting Before requesting service please try the following solutions PROBLEM No operation can be performed with the remote control Disc does not play Disc Menu does not appear The prohibition message appears on the screen Play mode differs from the Setup Menu selection The screen ratio cannot be changed No audio The screen is blank SOLUTION Check the batteries in the remote control They may need replacing Operate the remote control at a distance of no more than 20 feet from the player Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it Reinstall batteries and try to operate the remote control again Ensure that the disc is installed with the label side facing up Check the region number of the Blu ray Disc DVD Ensure that the disc has disc menus This message appears when an invalid button is pressed The Blu ray Disc DVD s software doesn t support the feature e g angles You ve requested a title or chapter number or search time that is out of range Some of the functions selected in the Setup Menu may not work properly if the disc is not encoded with the corresponding function The Screen Ratio is fixed on your Blu ray Disc DVD This is not a problem with the player Make sure you have selected the correct Digital Output in the Audio Options
36. ignal to the TV i Savion If your TV does not support HDCP High bandwidth Digital Content Protection random noise appears on the screen Dispose of batteries according to local environmental regulations Do not put them in the household trash 7 Connecting to an Audio System Connecting to a Network Router You can connect the Blu ray player to an audio system using one of the methods illustrated You can connect your player to your network router using one of the methods illustrated below below To use the DLNA network functionality you must connect your PC to your network as shown Do not connect the power cord to the wall outlet until you have made all the other in the illustrations connections Wired Network When you change the connections turn off all devices before you start Method 1 Connecting to an HDMI supported AV receiver e Connect an HDMI cable not supplied from the HDMI OUT jack on the back of the product to the HDMI IN jack on your receiver e Best quality Recommended Broadband modem A i with integrated router me _ Broadband gt service Method 2 Connecting to an AV receiver with Dolby Digital or a DTS decoder e Using a digital Coaxial cable not supplied connect the Coaxial Digital Audio Out jack on the product to the Digital Coaxial In jack of the receiver e Good quality e You will hear sound only through the front two speakers with Digital Output set to PCM
37. in water and wipe with a soft cloth When cleaning wipe gently the apparatus the apparatus has been e Holding Discs or cause skipping fingerprints will not get on the surface on a disc clean it with a mild from the inside to the outside of the disc e Disc Storage Do not keep in direct sunlight Keep in a cool ventilated area Keep in a clean protection jacket and store vertically Handling Cautions e Do not expose this apparatus to dripping or splashing Do not put objects filled with liquids such as vases on the apparatus e To turn this apparatus off completely you must pull the power plug out of the wall socket Consequently the power plug must be easily and readily accessible at all times e Do not plug multiple electric devices into the same wall socket Overloading a socket can cause it to overheat resulting in a fire e Before connecting other components to this player be sure to turn them off e f you move your player suddenly from a cold place to a warm place condensation may occur on the operating parts and lens and cause abnormal disc playback If this occurs unplug the player wait for two hours and then connect the plug to the power outlet Then insert the disc and try to play back again If the product makes an abnormal noise or produces a burning smell or smoke turn off the power switch immediately and disconnect the power plug from the wall outlet Then contact the nearest c
38. lick the icon in the DLNA line under File to start the download For instructions explaining how to play content located on your PC see page 17 System Settings Initial Settings By using the Initial Settings function you can set the language Network Settings etc For more information about the Initial Settings function refer to the Initial Settings section of this user manual page 9 Quick Start 14 You can turn on the power quickly by decreasing the boot time amp NOTES f this function is set to On Standby power consumption will be increased Anynet HDMI CEC Anynet is a convenient function that offers linked operations with other Samsung players that have the Anynet feature To operate this function connect this player to an Anynet Samsung TV with an HDMI cable With Anynet on you can operate this player using a Samsung TV remote control and start disc playback simply by pressing the PLAY gt button on the TV s remote control For more information please see the TV user manual 9 NOTES This function is not available if the HDMI cable does not support CEC f your Samsung TV has an Anynet logo then it supports the Anynet function Depending on your TV certain HDMI output resolutions may not work Please refer to the user manual of your TV f you have Anynet turned on when you turn off the product disconnect and then reconnect the power cable the produc
39. me commercially produced film and videos and their soundtracks When a prohibitet use of an unauthorized copy is detected a message will be displayed and playback or copying will be interrupted More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http www cinavia com To request additional information about Cinavia by email send a postcard with your mailing address to Cinavia Consumer Information Center PO Box 86851 San Diego CA 92138 USA This product incorporates proprietary technology under licence from Verance Corporation and is protected by U S Patent 7 369 677 and other U S and worldwide patens issued and pending as well as copyright and trade secret protection for certain aspects of such technology Cinavia is a trademark of Verance Corporation Copyright 2004 2010 Verance Corporation All right reserved by Verance Reverse engineering or disassembly is prohibited 21 Network Service Disclaimer All content and services accessible through this device belong to third parties and are protected by copyright patent trademark and or other intellectual property laws Such content and services are provided solely for your personal noncommercial use You may not use any content or services in a manner that has not been authorized by the content owner or service provider Without limiting the foregoing unless expressly authorized by the applicable content owner or service provider you
40. ntact us to repair your player an administration fee may be charged if either 1 An engineer is called out to your home at your request and there is no defect in the product 2 You bring the unit to a repair center and there is no defect in the product We will provide you with the amount of the administration fee before we make a home visit or begin any work on your player We recommend you read this manually thoroughly search for a solution on line at www samsung com or contact Samsung Customer Care at 1 800 SAMSUNG 726 7864 before seeking to repair your player 20 Specifications Power Requirements Power Consumption Weight Dimensions General Operating Temperature Range Operating Humidity Range Type A DC output Video Audio Digital Audio Output Ethernet Wireless LAN USB HDMI Audio Output Network AC110 120V 50 60Hz 12W 2 2 Ibs 10 6 W X 7 6 D X 1 6 H inches 41 F to 95 F 10 to 75 USB 2 0 5V 500mA Max 1080p 1080i 720p 480p PCM Bitstream Coaxial 100BASE TX Terminal Bulit in Network speeds equal to or below 10Mbps are not supported Design and specifications are subject to change without prior notice Weight and dimensions are approximate Dispose unwanted electronics through an approved recycler To find the nearest recycling location go to our website www samsung com recyclingdirect or call 877 278 0799 Compliance and Compatibility Notice
41. number indicates the number of lines of video per frame The i and p indicate interlaced and progressive scan respectively The more lines the higher the quality Resolution according to the output mode e Blu ray Disc E contents Digital Contents playback HDMI connected HDMI Mode E contents t i Blu ray Disc Digital contents Resolution of u Blu ray Disc 1080p Auto Max Resolution Max Resolution of TV input of TV input 1080p 60F Movie Frame Off 1080 60F 1080 60F Movie Frame Auto 24Fs 1080p 2Ar 1080i 1080i 720p 720p 480p 480p e DVD playback Setup HDMI connected HDMI Mode BD Wise 480i Auto Max Resolution of TV input 1080p 1080p 1080i 1080i 720p 720p 480p 480p 9 NOTES f the TV you connected to the player does not support Movie Frame or the resolution you selected the message If no pictures are shown after selecting Yes please wait for 15 seconds to return to the previous resolution Do you want to change the resolution appears If you select Yes the TV s screen will go blank for 15 seconds and then the resolution will revert to the previous resolution automatically f the screen stays blank after you have changed the resolution remove all discs and then press and hold the mi button on the front of the player for more than 5 seconds All settings are restored to the factory default Follow the steps on the previous page to access each mode and select the Display
42. ny wireless network devices currently connected through the player or if applicable the player s current wired connection will be disconnected Q Wireless Automatic 1 In the Home screen select Settings and then press the E button 2 Select Network and then press the button 3 Select Network Settings and then press the EJ button 4 Select Wireless in the Network Settings screen and then press the button The player searches for and then displays a list of the available networks O Network Setting Wireless network K i k iptime23 r You can connect your Blu ray a m player to the internet Please Eatonton select which wireless network to use WPS PBC Search lt gt Move Select Return 5 Select the desired network and then press the EJ button 6 On the Security screen enter your network s Security Code or Pass Phrase Enter numbers directly using the number buttons on your remote control Enter letters by selecting a letter with an arrow button and then pressing button NOTE To view the password as you enter it use the arrow buttons to select Show Password on the right side and then press button 7 When done select Done and then press the button The player verifies the network connection and then connects to the network 8 When verification is complete select OK and then press the button amp NOTES You should be able to find
43. on DLNA the DLNA Logo and DLNA CERTIFIED are trademarks d o service marks or certification marks of the Digital Living Network CG Na Alliance CERTIFIED This SAMSUNG brand product as supplied and distributed by SAMSUNG and delivered new in the original carton to the original consumer purchaser is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of One 1 Year Parts and Labor 90 Days Parts and Labor for Commercial Use This limited warranty begins on the original date of purchase and is valid only on products purchased and used in the United States To receive warranty service the purchaser must contact SAMSUNG for problem determination and service procedures Warranty service can only be performed by a SAMSUNG authorized service center The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG s authorized service center Transportation of the product to and from the service center is the responsibility of the purchaser SAMSUNG will repair or replace this product at our option and at no charge as stipulated herein with new or reconditioned parts or products if found to be defective during the limited warranty period specified above All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG Replacement parts and products assume the remaining original warranty or ninety 90 days whicheve
44. password 1 Remove any discs 2 Press and hold the button on the front panel for 5 seconds or more All settings will revert to the factory settings 9 NOTES When the factory default settings are restored all the user stored BD data will be deleted General Settings Time Zone Lets you specify the time zone that is applicable to your area Support Settings Software Upgrade The Software Upgrade menu allows you to upgrade the player s software for performance improvements or additional services By Online To upgrade By Online follow these steps 1 Select By Online and then press the button The Connecting to Server message appears 2 A popup message will appear if an update is available 3 Ifyou select Yes the player will turn off automatically before restarting Never turn the player on or off manually during an upgrade 4 The update progress popup will appear When the update is completed the player will turn off automatically Press the POWER button to turn on the player amp NOTES The Update is complete when the player turns off after restarting Press the POWER button to turn on the updated player for your use Never turn the player off or back on manually during the update process Samsung Electronics takes no legal responsibility for player malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade By USB To upgrade b
45. press the 9 y button the playback speed will change In pause mode press the TB Step Motion button Play Each time you press the J button a new frame appears During playback press the Q or 5 button Hauo Each time you press the E or E button the disc moves to the previous or next chapter or file Using the disc menu title menu popup menu and title list DISC MENU During playback press this button button to start the disc menu function TITLE MENU During playback press this button button to start the title menu function POPUP MENU During playback press this button button to start the popup menu function Controlling Music Playback You can control the playback of music located on a Blu ray disc DVD CD USB device or your computer Buttons on the Remote Control used for Music Playback NUMBER buttons Audio CD CD DA only o During Playlist playback press the desired track number The selected track is played Skip During playback press the or 9 button to move to the previous or next file of the playlist O button Stops a track Fast Play Audio CD CD DA only During playback press the GJ or G3 button Each time you press the EB or O3 button the playback speed will change Pause Pauses a track O button Plays the currently selected 0 track 17 Repeat an Audio CD CD DA MP3 1 During Playlist playback press the TOOLS button
46. r is longer SAMSUNG s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement Non SAMSUNG hardware and software products if provided are on an AS IS basis Non SAMSUNG manufacturers suppliers publishers and service providers may provide their own warranties This limited warranty covers manufacturing defects in materials and workmanship encountered in normal and except to the extent otherwise expressly provided for in this statement noncommercial use of this product and shall not apply to the following including but not limited to damage which occurs in shipment delivery and installation applications and uses for which this product was not intended altered product or serial numbers cosmetic damage or exterior finish accidents abuse neglect fire water lightning or other acts of nature use of products equipment systems utilities services parts supplies accessories applications installations repairs external wiring or connectors not supplied and authorized by SAMSUNG or which damage this product or result in service problems incorrect electrical line voltage fluctuations and surges customer adjustments and failure to follow operating instructions cleaning maintenance and environmental instructions that are covered and prescribed in the instruction book product removal or reinstallation reception problems and distortion r
47. s in the Pop up The player turns off automatically then restarts and begins the download Never turn the player on or off manually during an upgrade The update progress popup appears 3 When the update is complete the player turns off again automatically Press the POWER button to turn on the player amp NOTES N The update is complete when the player turns off after restarting Press the POWER button to turn on the updated player for your use Never turn the player off or on manually during the update process Samsung Electronics takes no legal responsibility for player malfunction caused by an unstable Internet connection or consumer negligence during software upgrade Contact Samsung Provides contact information for assistance with your player Terms of Service Agreement Lets you view the general disclaimer regarding third party contents and services Reset Returns all settings to their factory defaults except for the network settings 15 Media Play Playing a Commercially Recorded Playing Files on a USB Device Disc Press the button to open the disc tray Place a disc gently into the disc tray with the disc s label facing up Press the button to close the disc tray Playback starts automatically You can play multimedia files located on a USB storage device 1 2 16 Move to the Home menu In Stop mode connect the USB storage device to the USB
48. selections PCM or Bitstream f your TV is not compatible with compressed multi channel formats Dolby Digital DTS the player may output PCM 2ch downmixed audio even though you selected Bitstream either Re encoded or Unprocessed in the setup menu f your TV is not compatible with PCM sampling rates over 48khz the player may output 48kHz downsampled PCM audio even though you set PCM Downsampling to Off PCM Downsampling Lets you choose to have 96KHz PCM signals downsampled to 48KHz before they are outputted to an amplifier Choose only if your amplifier or receiver is not compatible with a 96KHz signal Dynamic Range Control Lets you apply dynamic range control to Dolby Digital Dolby Digital Plus and Dolby True HD audio e Auto Automatically controls the dynamic range of Dolby TrueHD audio based on information in the Dolby TrueHD soundtrack Also turns dynamic range control on for Dolby Digital and Dolby Digital Plus e Off Leaves the dynamic range uncompressed letting you hear the original sound e On Turns dynamic range control on for all three Dolby formats Quieter sounds are made louder and the volume of loud sounds is reduced Downmixing Mode Lets you select the multi channel downmix method that is compatible with your stereo system You can choose to have the player downmix to normal stereo or to surround compatible stereo 11 Network Settings 5 Please contact your ISP to find ou
49. server to certify the disc the server uses the transmitted data to check if the disc is valid and sends the certificate back to the player The Internet connection may be restricted while you are using BD LIVE contents Using BD LIVE Once the player is connected to the network you can enjoy various movie related service contents using a BD LIVE compliant disc 1 Attach a USB memory stick to the USB jack on the front of the player and then check its remaining memory The memory device must have at least 1GB of free space to accommodate the BD LIVE services 2 Insert a Blu ray Disc that supports BD LIVE 3 Select an item from various BD LIVE service contents provided by the disc manufacturer amp NOTES The way you use BD LIVE and the provided contents may differ depending on the disc manufacturer 13 The DLNA Function DLNA lets you play music video and photo files located in your PC or NAS on the player To use DLNA with your player you must connect the player to your network See pages 12 13 To use DLNA with your PC you must install DLNA software on your PC If you have NAS you can use DLNA without any additional software To download DLNA software 1 Goto Samsung com 2 Click Support enter your player s product number in the field that appears and then click Product 3 On the next screen click Get downloads under Downloads Click Software on the next page 5 C
50. t if your IP address is static or dynamic If it is dynamic and most are we recommend using the Auto procedure for network setup This is easiest and will work in the majority of cases If it is static you must use the manual set up procedure Network setup directions start below Configuring Your Network Connection Before you begin contact your ISP to find out if your IP address is static or dynamic If it is dynamic and you have a wired or wireless network we recommend using the Automatic configuration procedures described below If you are connecting to a wired network connect the player to your router using a LAN cable before you start the configuration procedure If you are connecting to a wireless network disconnect any wired network connection before you begin To begin configuring your network connection follow these steps Wired Network Wired Automatic 1 In the Home screen select Settings and then press the EJ button 2 Select Network and then press the button 3 Select Network Settings and then press the EJ button 4 Select Wired in the Network Settings screen and then press the button 12 Select Connect button and then press the EJ button The product detects the wired connection verifies the network connection and then connects to the network Q Wired Manual If you have a static IP address or the Automatic procedure does not work you ll need to set the Network S
51. t turns on automatically to re establish the Anynet connection After about 15 seconds it turns off again automatically Some Samsung TVs when connected to this product using the Anynet function will when you turn them on display a warning popup message saying no connection has been found Never the less the Anynet connection is properly established and available to use BD Data Management Enables you to manage the downloaded contents you accessed through a Blu ray disc that supports the BD LIVE service and stored on a flash drive You can check the device s information including the storage size delete the BD data or change the Flash memory device amp NOTES n the external memory mode disc playback may be stopped if you disconnect the USB device in the middle of playback Your player supports the FAT16 FAT32 and NTFS file systems We recommend you use USB devices that support USB 2 0 protocol with 4 MB sec or faster read write speed The Resume Play function may not work after you format the storage device The total memory available to BD Data Management may differ depending on the conditions Language Settings You can select the language you prefer for the Home menu disc menu audio and subtitles amp NOTES The selected language will only appear if it is supported on the disc Security Settings When you access this function for the first time the PIN screen appears Enter th
52. th for menus on the player and also several Blu ray Disc functions Press to use bonusview function Allows you to repeat A B disc wens BE SEO control This function is convenient for using at night or when the room is dark If this button is set to On battery usage time will be reduced Allows you to repeat a title chapter track or If you use an HDMI to DVI cable to connect to your display device you must also connect the Digital Audio Out on the player to an audio system to hear audio An HDMI cable outputs digital video and audio so you don t need to connect an audio cable disc SAMSUNG Depending on your TV certain HDMI output resolutions may not work Please refer to the user manual of your TV NOTES When you connect the player to your TV using the HDMI cable or to a new TV and then turn it on for the Installing batteries first time the player automatically sets the HDMI output resolution to the highest supported by the TV f the remote does not operate properly A long HDMI cable may cause screen noise If this occurs set HDMI Deep Color to Off in the menu e Check the polarity of the batteries e Check if the batteries are drained To view video in the HDMI 720p 1080i or 1080p output mode you must use a High speed category 2 e Check if the remote sensor is blocked by HDMI cable obstacles Be e Check if there is any fluorescent lighting nearby HDMI outputs only a pure digital s
53. the Security Code or Pass Phrase on one of the set up screens you used to set up your router or modem Q Wireless Manual If you have a static IP address or the Automatic procedure does not work you ll need to set the Network Settings values manually 1 _ Follow the directions in Wireless Automatic through Step 5 2 The player searches for a network and then displays the connection failed message 3 On the bottom of the screen select IP Settings and then press the button The IP Settings screen appears 4 Select the IP Setting field and then press the EJ button 5 Select Enter manually in the IP Setting field and then press the button 6 Select a value to enter IP Address for example and then press J button Use the number keypad on your remote control to enter the numbers for the value You can also enter numbers using the AY buttons Use the lt gt buttons on the remote control to move from entry field to entry field within a value When done with one value press the button 7 Press the A or Y button to move to another value and then enter the numbers for that value following the instructions in Step 6 8 Repeat Steps 6 and 7 until you have filled in all values 9 NOTES You can get the Network values from your Internet provider 9 When finished select OK and then press the E9 button The Security Screen appears 10 On the Security screen enter your network s Security
54. ustomer service center for technical assistance Do not use the product Using the product as it is may cause a fire or an electric shock Copyright 2013 Samsung Electronics Co Ltd All rights reserved No part or whole of this user s manual may be reproduced or copied without the prior written permission of Samsung Electronics Co Ltd Contents SAFETY INFORMATION We ae 2 FIECAU ON ran e an 2 Disc Storage amp Management 3 Handling Cautions rennen 3 EI NONE nee 3 GETTING STARTED Before using the User Manual 4 Logos of Discs the player can play 4 CCESSOT ES enge 6 Front Paola 6 Rear Panel 6 Remote Control ccccccccccccsccssssseeeeeseseeneaes 7 CONNECTIONS Connecting to a Mensen 7 Connecting to an Audio System 8 Connecting to a Network Router 8 SETTINGS The Initial Settings Procedure 9 Menu Navigation 9 Accessing the Settings Menu 10 Display SEtINgs ae ne 10 Audio S STING Si terre 11 Network Settings 12 System Settings nie 14 Language SeliNgE uni 14 Security SEINES 14 General Settings 15 Support Settings nun een 15 MEDIA PLAY Playing a Commercially Recorded Disc 16 Playing Files on a USB Device 16 Playing a Disc with User Recorded Content 16 Playing Content Located in Your PC 17 Controlling Video Playback n s 17 Controlling Music Pl
55. y USB follow these steps 1 Visit www samsung com bluraysupport Download the latest USB software upgrade zip archive to your computer 3 Unzip the zip archive to your computer You should have a single RUF file with the same name as the zip file Copy the RUF file to a USB flash drive 5 Make sure there is no disc in the player and then insert the USB flash drive into the USB port of the player 6 In the player s menu go to Settings gt Support gt Software Upgrade 7 Select By USB amp NOTES No disc should be in the product when you upgrade the software using the USB Host jack When the software upgrade is done check the software details in the software Upgrade menu Do not turn off the player during the software upgrade It may cause the player to malfunction Software upgrades using the USB Host jack must be performed with a USB flash memory stick only Auto Upgrade Notification If you have connected the player to your network and then set Auto Upgrade Notification on the player automatically notifies you when a new software version is available for the player To set Auto Upgrade Notification on follow these steps 1 Select Auto Upgrade Notification and then press the J button 2 Usethe AY buttons to select On and then press the J button If there is a new software version available the player notifies you with a popup message 1 To upgrade the firmware select Ye
56. yer to an Anynet HDMI CEC compliant Samsung TV using HDMI Cable 2 Set the Anynet HDMI CEC feature to On in both the TV and the player 3 Set the TV to the Initial Settings Procedure f you leave the player in the stop mode for more than 5 minutes without using it a screen saver will appear on your TV If the player is left in the screen saver mode for more than 25 minutes the power will automatically turn off Menu Navigation HOME Button Press to move to the Home menu RETURN Button Return to the previous menu Enter DIRECTION Button Move the cursor or select an item Activate the currently selected item Confirm a setting EXIT Button Press to exit the current menu Selects Music Selects Settings Displays the buttons you can use on the remote to access functions Selects applications Selects Videos 960 6 o Selects Photos 9 NOTES The Videos Photos and Music options require that you have an appropriate disc inserted into the player or a USB flash device attached to the player Accessing the Settings Menu To access the Settings menu and sub menus follow these steps 1 Press the POWER button The Home Menu appears 2 Press the lt P buttons to select Settings and then press the E button 3 Press the A Y buttons to select the desired submenu and then press the button 4 Press the 4V buttons to select the desired item and then press the
Download Pdf Manuals
Related Search