Regalo FLEXI GATE FORM 1180 User's Manual
Contents
1. O regalo FOr wW Ti oR HE MOST important PEOPLE IN THE y FLEXI GATE form MODEL NO 1175 1180 Owner s Manual READ ALL INSTRUCTIONS BEFORE ASSMBLY AND USE OF GATE KEEP INSTRUCTIONS FOR FUTURE USE Regalo International LLC 14305 Southcross Drive Suite 100 Burnsville MN 55306 Phone 952 435 1080 FAX 952 435 1088 Important Keep these instructions for future reference Flexi Gate from ADDITIONAL EXTENSIONS SOLD SEPARATELY WARNING Intended for young children aged six months through 24 months Check the gate regularly to see if all the hardware and mountings are tight To prevent serious injury or death securely install gate or enclosure and use according to manufacturer s instructions Never use with a child able to climb over or dislodge the gate or enclosure Never leave child unattended Use only with the locking latching mechanism securely engaged To prevent falls NEVER used at the top of stairs Contact Regalo for questions and replacement parts If in doubt about the use of your gate call our customer care line 952 435 1080 Regalo International LLC 14305 Southcross Drive Suite 100 Burnsville MN 55306 Made in China Assembly and Installation Instructions Please read these instructions carefully before installing your gate Important There are four pieces of Wall Mounting Hinges These Wall Mounting Hinges must be used in securing your gate to the wall2. If not the gate can become dislodged from the opening and unstable 1 Check to make sure you have the following components before you begin to set up your gate 1 Folded Gate Frame and Wall Mounting Assembly 2 Mounting Screws x 8 pcs Step 1 Preparing to Install your Gate Begin by unfolding the gate frame To do this simply loosen the Locking Knobs at each pivoting joint by turning the knob counter clockwise as shown in Diagram 1 Loosen the knobs enough to allow the gate to swing open freely Step2 Move the gate to the side of the wall opening then bring the Wall Mounting Hinge to the wall as shown in Diagram 2 Hl Diagram 2 Step 3 Apply a screw driver to fix the Wall Mounting Hinge on to the wall as shown in Diagram 3 Diagram 3 Step 4 Repeat the Step 2 and 3 on the other end of the gate Go back an tighten all Locking Knobs When this is done the gate is ready to use on the gate opening
Download Pdf Manuals
Related Search