RCA 1113-1BSGA User's Guide
Contents
1. Call Waiting Caller ID Speakerphone User s Guide Please read this manual before operating product for the first time Visit the RCA web site at www rca4phones com Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68 FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating anong other information the US number and Ringer Equivalence Number REN for the equipment You must upon request provide this information to your telephone company The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called In most but not all areas the sum of the RENs of all devices connected to one line should not exceed 5 To be certain of the number of devices you may connect to your line as determined by the REN you should contact your local telephone company A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA A compliant telephone cord and modular plug is provided with this product It is designed to be connected to a compatible modular jack that i2. Snap the battery compartment doors back into place and replace the mounting bracket 5 Ifthe line cord was previously connected re attach it to the unit and check your memory locations NOTE If the low battery icon appears in the display you need to replace the batteries It is important that you replace the batteries as soon as possible in order to maintain Caller ID operation Installing the Phone Your phone should be placed on a level surface such as a desk or table top or you can mount it on a wall A wall mounting pedestal is packaged with your phone Connecting the Handset 1 Connect one end of the coiled handset cord to the jack on the handset 2 Plug the other end of the coiled handset cord to the jack on the base 3 Place the handset in the cradle Connecting the Telephone Line 1 Connect one end of the straight telephone line cord to the jack on the back of the base 2 Connect the other end to a wall phone jack 3 Set the ringer volume switch located at the back of the base to the desired loudness In OFF Telephone will not ring LO Sound will be sum lowest i HI Sound will be loudest NOTE The unit is properly installed if you pick up the handset and hear the dial tone Otherwise recheck all installation steps Wall Mounting Your speakerphone can also be mounted on a wall plate not included NOTE To prevent the handset from falling out of the cradle while the pho
3. calling services such as telebanking and long distance services that require tone dialing you can use this feature to temporarily change from pulse to tone service After dialing the telephone number and connecting to the customer calling service 1 Press and release the tone button 2 Whenyou hang up the telephone automatically returns to pulse dialing mode Speakerphone Basics Location Your phone features a speakerphone for ease of use and convenience during a phone conversation At any time during a conversation you can lift the handset to stop using the speakerphone Likewise when you are using the handset press the speaker button and place the handset in the cradle to switch to the speakerphone For best speakerphone performance avoid the following e Areas with high background noise The microphone might pick up these 12 sounds and prevent the speakerphone from going into the receiving when you finish talking e Surfaces affected by vibration e Recessed areas such as in acorner under a cupboard or next to a cabinet which can generate an echo effect Speakerphone Use Note the following guidelines when using the speakerphone e The speakerphone works similar to a two way radio in that you can only listen or talk at one time e Stay reasonably close to the phone so that you can be clearly heard by the person to whom you are talking e You can adjust the speaker volume by pressing the VOL or b
4. jack while setting up the Caller ID menu 1 Press the menu button to enter the menu feature configuration mode 1 ENG FRA ESP CID language default English 2 CONTRAST default level is 3 3 LOCAL AREA CODE 4 TONE PULSE Default is tone dialing 2 Press the menu button to scroll through the 4 menu screens 3 Usethe 4 or gt buttons to select the desired setting 15 NOTE You have 20 secondsfollowing an entry before the phone returns to the Summary Screen Display Language This adjustment allows you to display the Caller ID prompts in English French or Spanish 1 Press the menu button until the screen displays ENG FRA ESP 2 Use the review 4 or gt buttons to select ENG FRA or ESP 3 Press the button again to save Contrast This adjustment allows you to adjust the contrast of the display 1 Press the menu button until the screen displays CONTRAST 2 Use the review 4 or gt buttons to select level 1 2 3 or 5 3 Press the menu button again to save Local Area Code The telephone uses the programmed area codes to determine the number format to display when a valid Caller ID signal is received Numbers that match the local area code are displayed as seven digits and are used for dialing back previous numbers Entering your local area code will also help you immediately know if the call is local or long distance when viewing the CID records in the display NOTE If you make a mistake and want to start o
5. to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna that is the antenna for radio or television that is receiving the interference e Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna e Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected If these measures do not eliminate the interference please consult your dealer or an experienced radio television technician for additional suggestions Also the Federal Communications Commission has prepared a helpful booklet How To Identify and Resolve Radio TV Interference Problems This booklet is available from the U S Government Printing Office Washington D C 20402 Please specify stock number 004 000 00345 4 when ordering copies Notice The changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Hearing Aid Compatibility HAC This telephone system meets FCC standards for Hearing Aid Compatibility FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment This equipment s
6. you with a new or at our option a refurbished exchange unit of same or similar model The exchange model is under warranty for the remainder of the original product s one year warranty or 90 days from the date the replacement product was shippedto you whichever is longer How to get service e Call Customer Care at 1 877 722 4908 Please have your product with you and please have your model number and date code available when calling us The model number and date code can be found on the underside of the base unit 22 If you are within your limited warranty period and it is determined that service is required We will ask that you properly pack your product to avoid shipping damage Werecommend that you use the original carton and packing materials We will ask you to include with your product the following Your name return shipping address and daytime phone number handwritten or typed on a sheet of paper A legible copy of your sales receipt please do not send the original sales receipt Ship your product prepaid to the address we provide We suggest shipping your product via a traceable carrier as we are not responsible for lost mis directed or damaged shipments You may want to write the date shipped carrier and tracking number here Upon receipt of your product we will validate your product is under warranty and if determined your product is warranty eligible we will ship to you a new or at our option a
7. 0 seconds on hook and 3 seconds off hook located in the upper right side of the display will start letting you know how much time is left until the unit returns to the Summary Screen 3 If you are at on hook and the screen displays PICKUP OR ADJ you can adjust the phone number format by pressing the dial button If the phone is off hook and the screen displays ADJUST you can adjust the phone number format by pressing the dial button For example sometimes a 7 digit local number cannot be dialed because it requires a 10 digit or 11 digit format Press the dial button repeatedly to scroll through the 7 10 and 11 digit numbers 7 digits 7 digit telephone number i e 555 5555 10 digits 3 digit area code 7 digit telephone number i e 425 555 5555 11 digits long distance code 1 3 digit area code 7 digit telephone number i e 1 425 555 5555 4 To dial the displayed number and the phone is on hook pick up the handset or press the speaker button before the timer reaches 0 If the phone is off hook wait until the time reaches 0 The screen displays NOW DIALING and the number is dialed If You Did Not Program Your Local Area Code 1 Use the review 4 or gt buttons to display the number you want to dial You will only see 10 digit numbers i e 234 555 1234 2 See steps 2 through 4 in the previous section to complete the dial back process Setting Up the Caller ID Menu You should not plug the telephone into the modular
8. 2 E eee erent E een rere ere 12 Temporary Tone Dialing 12 Speakerphone Basics eeeeee 12 Esiele E EE ere 12 Speakerphone Use 13 Caller ID CID Features 13 CID Summary Screen 13 Receiving and Storing CID Calls 14 Reviewing CID RECOrdS si scstscstsecssiceies 14 Deleting CID Records 14 Dialing Bac Kkescnugmararosionanan 14 Setting Up the Caller ID Menu 15 Display Lam OA 86 sesccissvavscanaecascsoresscetend 16 CON Ei ei 16 Local Area Code 16 Dialing Modesscscisscissonenoissss 16 MEMO crannan 17 Storing a Name and Number in MC IMONY isaxoscsesacosssincnsicneseasiespennicemerinstonnn 17 Changing a Stored Numbetv 18 Erasing a Stored Numbet 06 18 Copying Caller ID Memories to User MEMO Y isciecsiszacossrannndecneaetartnnsnemarinstnn 18 Storing a Redial Number to Memo Y ssacters cetcetstinceses chest ndacsctesverinss 18 Dialing a Number Stored in Memory While On hook 04 19 Dialing a Number Stored in MEMO runian i 19 Cascade Dial ssconosoosssmsia 19 Storing a Pause in Memory 19 Pre Didii emanano 20 Caller ID Display Messages 20 Troubleshooting TipS cccseeee 20 General Product Gar 21 Warranty Assistance 21 Limited Warranty 22 Industry Canada I C Notice This product meets the applicable Industry Canada technical specifications Le pr sent materiel est conforme aux specifications techniques ap
9. CAUTION When using telephone equipment there are basic safety instructions that should always be followed Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference Short Glossary of Terminology Used in this Manual Hook switch The part of the phone that pops up to activate the phone line when the handset is lifted from the base Off hook A term used to describe the phone in its active mode when the handset is off of the base cradle or when the speaker button is pressed On hook A term used to describe the phone in an inactive mode 6 BeforeYouBegin Parts Checklist Make sure your package includes the following items ste 2 wire telephone Handset cord line cord Handset Desktop pedestal Telephone Jack Requirements Wall plate To use this phone you need an RJ11C type modular telephone jack which might look like the one a j pictured here installed in your home If you don t have a modular jack call your local phone company Modular ry to find out how to get one installed telephone line jack bi Important Installation Information CAUTION Disconnect the phone cord from A the wall outlet before installing or replacing the batteries e Never install telephone wiring during a lightning storm e Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface e Use caution when installing or mo
10. CID Records e Press the review 4 or buttons to view the call records e Press the review 4 or gt button to scroll through the call records from the most recent to the oldest e Press the review 4 or gt button to scroll through the call records from the oldest to the newest e When all of the records have been viewed The screen displays START END Deleting CID Records e Todelete the record shown in the display press the delete button once e To delete all records while reviewing press and hold the delete button for about three seconds The screen displays DELETE ALL Press delete again to complete Dialing Back When reviewing Caller ID records you can dial back the numbers on the display by pressing the dial button NOTE If the screen displays PICKUP PHONE no other changes to the number can be made The information sent from the telephone company is known to be a valid number for dialing back used only in very limited areas Once you pick up the phone the number is automatically dialed If You Programmed Your Local Area Code 1 Use the review 4 or gt buttons to display the number you want to dial 2 Press the dial button e If you see a number with seven digits i e 555 1234 then the call is from within your area code However this does not guarantee the call is a local call e Ifyou see a number with 11 digits i e 1 234 555 1234 then the call is not from within your area code 14 NOTE A timer 1
11. IMER OF WARRANTIES AND LIMITED WARRANTY AREGOVERNED BY THE LAWS OF THE STATE OF INDIANA EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE How state law relates to this warranty Some states do not allow the exclusion nor limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you also may have other rights that vary from state to state If you purchased your product outside the USA or Canada This warranty does not apply Contact your dealer for warranty information Product Registration e Please complete and mail the Product Registration Card packed with your product or visit www rca4phones com to register your new product Product registration is not required for warranty coverage but does allow us to contact you should it be necessary Visit the RCA web site at www rca4phones com Please do not send any products to the Indianapolis address listed in this manual or on the carton This will only add delays in service for your product 1113 Printed in China 10 35 24
12. after the Phone Rings e Are you subscribed to Caller ID service from your local telephone company e Be sure to wait until the second ring before answering Phone Dials in Pulse with Tone Service e Make sure TONE PULSE is set to TONE DIAL Phone Won t Dial Out with Pulse Service e Make sure TONE PULSE is set to PULSE DIAL Phone Does Not Ring e Make sure ringer switch is set to LOW or HIGH e You may have too many extension phones on your line Try unplugging some extension phones e Check for dial tone See Troubleshooting Tips for No Dial Tone Incoming Voice Volume Low e Areother phones off hook at same time If so this is normal condition as volume drops when additional phones are used at once e Check the handset receiver or speaker volume Memory Dialing e Make sure you entered the numbers correctly into memory General Product Care To keep your phone working and looking good follow these guidelines e Avoid putting it near heating appliances and devices that generate electrical noise forexample motors or fluorescent lamps e DO NOT expose to direct sunlight or moisture e Avoid dropping and other rough treatment to the unit e Clean with a soft cloth e Never use a strong cleaning agent or abrasive powder because this will damage the finish e Retain the original packaging in case you need to ship it at a later date Warranty Assistance Your sales receipt will be required to demonstrate proof of purcha
13. difying telephone lines e Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations e Temporarily disconnect any equipment connected to the phone such as faxes other phones or modems BaseLavout display memory review 4 or gt store buttons buttons mute button speaker button VOL buttons ringer volume switch delete button menu button store button redial tone flash dial pause button button exitbutton button button Installing and Replacing the Batteries Your Caller ID phone uses 4 AA size alkaline batteries for receiving and storing Caller ID records and for storing the numbers you use for memory dialing pulse dialing and redial IMPORTANT You will have approximately 90 seconds to replace the batteries before the memories stored are lost Please read the instructions before replacing the batteries and have the batteries ready to be inserted beforehand IMPORTANT If you are not going to use the telephone for more than 30 days remove the batteries because they may leak and damage the unit 1 Ifthe telephone line cord is connected disconnect it from the base unit 2 Release latch on battery compartments and remove cover 3 Insert 4 AA size alkaline batteries as shown on the diagram in the battery compartments 4
14. elay is needed in an automatic dialing sequence For example when you must dial a 9 to get an outside line or when you enter codes to access your long distance company akon 19 Pre Dialing 1 With the handset on the cradle enter the telephone number you wish to call The telephone number shows in the display 2 Lift the handset or press the speaker button and the number automatically dials NOTE Use the delete button to delete an incorrectly entered number Caller ID Display Messages The following special messages indicate the status of a message or the unit BLOCKED CALL The caller of the incoming call is registered as Private Number and their Caller ID information is withheld CALL WAITING Indicates a callis waiting on the line LOW Battery power level is low NO CALLS The caller memory is empty START END You are at the beginning or the end of the Caller ID memory log UNKNOWN CALLER The incoming call does not have Caller ID service or their service areais not linked to yours If the screen displays UNKNOWN CALLER along with a calling number the name information for that number was not available Troubleshooting Tips No Dial Tone e Check all cabling to make sure that all connections are secure and not damaged e Check hook switch Does it fully extend when handset is lifted from cradle No Display e Replace the batteries e Check for proper battery installation 20 No Information is shown
15. hould be installed and operated with a minimum distance of 20 centimeters between the radiator and your body This transmitter must not be co located or operated in conjunction with any other antenna or transmitter CAUTION ee OF ELECTRICS SHOCK THE LIGHTNING CAUTION TO REDUCE THE THE EXCLAMATION FLASH AND ARROW POINT WITHIN THE WARNING TO HEAD WITHIN THE TRIANGLE IS A See TAL cHex Wann Sey Seniteane rts moe AINE 0 or ELECTRICAL SHOCK f ai cating you OF IMPORTANT HAZARD DO NOT VOLIABE INSIDE PERSONNEL TE LOMEANYING OLT TO RAIN THE PRODUCT THE PRODUCT OR MOISTURE SEE MARKING ON BOTTOM BACK OF PRODUCT TableofContents Equipment Approval Information 2 Interference Information 3 Hearing Aid Compatibility HAC 4 FCC RF Radiation Exposure PLS NS ON essiensa 4 DVO UNG WOM ececextsiscedcesssoancatescentcresncncatsmes 6 Before YOU Begin 6 Telephone Jack Requirements 6 Important Installation Information 7 Base Mes 1 6 0 Leone nee ene ee 8 Installing and Replacing the BANET Grori versccesd aa eee cca 9 Installing the Phone 9 Connecting the Handset 9 Connecting the Telephone Line 10 Wall MOUNN sssini 10 Attaching the Wall Mounting Pedestal sssrinds 10 Receiving a Phone Call 11 Making a Phone Call ccs 11 E E E E eer 11 Adjusting the Handset Receiver E E E E eee 11 Adjusting the Speakerphone eE E S E E 11 15 16 sinna 11 10 CReenennee eet A nie ET EE 1
16. istake use the delete button 4 Use the number keys to enter the telephone number up to 32 digits and press the store button to save The unit will not dial a phone number in this mode The cursor automatically moves to the text line for name entry 5 Use the number keys to enter the name of the person associated with the telephone number you just entered More than one letter is stored in each of the number keys For example to enter the name BILL SMITH press the 2 key twice for the letter B Press the 4 key 3 times for the letter I Press the 5 key 3 times for the letter L NOTE The flashing cursor automatically moves to the next position or you may press the review 4 or p buttons to move the cursor to the next position Press the 5 key 3 times for the second letter L Press the arrow key 4 two times to insert a space and press the 7 key 4 times for the letter S Press the 6 key once for the letter M Press the 4 key 3 times for the letter I Press the 8 key for the letter T Press the 4 key twice for the letter H 6 Press the store button to save the name 7 To enter another name and number in a different memory location return to step 1 and repeat the process 17 Changing a Stored Number Repeat the storage sequence under Storing a Name and Number in Memory and use the delete button to delete the old number before entering the new number Erasing a Stored Number 1 Press the store button 2 Press the memor
17. mory Adjusting the Handset Receiver Volume While using the handset you can adjust the speaker volume by pressing the VOL or buttons The screen displays REC Handset Receiver volume Adjusting the Speakerphone Volume While using the speakerphone you can adjust the speaker volume by pressing the VOL or buttons The screen displays SPK volume level NOTE Both handset receiver and speakerphone volume return to the default setting low if the unit s power is reset Redial You may redial the last number you called by pressing the redial button after 11 ee you hear a dial tone NOTE The redial feature holds the last number up to 32 digits that you dialed in memory If you pressed any other numbers after dialing the phone number for example when accessing a voice menu system then those numbers are also dialed Mute Use the mute button to interrupt a phone conversation to talk privately with someone else in the room A conversation can be muted while using the speakerphone or handset Press the mute button The mute indicator illuminates Press the mute again to turn it off NOTE Switching from speakerphone to handset cancels mute Flash Press flash exit to activate special features of your telephone network such as Call transfer or special services from your local telephone company such as Call waiting Temporary Tone Dialing If you have pulse rotary service and want to access customer
18. ne is hanging on the wall you must rotate the handset hook 180 located on the base See diagram below To detach the desktop pedestal Attaching the Wall Mounting Pedestal 1 Rotate the hook 180 Refer to Dia 1A 180 2 Turn the phone over so that the bottom of the base is facing up Dia 1A 10 3 Plug one end of straight telephone line cord p into the jack on the bottom of the base 4 Feed the line code through the groove and cann 1 plug the end into the modular telephone mn l jack Excess telephone line can be stuffed into the recess area on the bottom of the J Base Unit 5 Slip the mounting holes on the bottom of the base over the wall plate posts and firmly slide the unit down into place Telephone Basics You can use the telephone by speaking into and listening through the handset or by using the speakerphone Receiving a Phone Call 1 Liftthe handset or press the speaker button to answer the call 2 Replace the handset in the cradle or press the speaker button to hang up Making a Phone Call 1 Liftthe handset or press the speaker button Wait for a dial tone 2 Dial the telephone number you want to call 3 Replace the handset in the cradle or press the speaker button to hang up Volume You may adjust the handset and speakerphone volume independently with the VOL or buttons Both handset receiver volume level and speakerphone volume level are saved in me
19. plicables d Industrie Canada The Ringer Equivalence Number is an indication of the maximum number of terminals allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five L indice d quivalence de la sonnerie IES sert a indiquer le nombre maximal de terminaux qui peuvent tre raccord s a une interface t l phonique La terminaison d une interface peut consister en une combinaison quelconque de dispositifs a la seule condition que la somme d indices d quivalence de la sonnerie de tous les dispositifs n exc de pas 5 This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe Best conforme a la norme NMB 003 du Canada IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment basic safety precautions should always be followed to reduce the risk of fire electric shock and injury to persons including the following 1 Do not use this product near water for example near a bath tub wash bowl kitchen sink laundry tub in a wet basement or near a swimming pool 2 Avoid using a telephone other than a cordless type during an electrical storm There may be a remote risk of electric shock from lightning 3 Do not use the telephone to report a gas leak in the vicinity of the leak Introduction
20. refurbished exchange unit of same or similar model This exchange unit will be shipped to you at no cost What your limited warranty does not cover Customer Instruction Your Owner s Manual provides information regarding operating and install instructions Additional information may be obtained by contacting the retailer Installation and set up service adjustments Batteries Damage from misuse neglect unauthorized repair Products which have been modified or incorporated into other products Products that have been serviced by an unauthorized servicer Products purchased or serviced outside the USA or Canada Acts of nature such as but not limited to lightning damage Limitation of Warranty e THIS LIMITED WARRANTY ISTHE ONLY WARRANTY APPLICABLE TO THIS PRODUCT ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED NO VERBAL OR WRITTEN INFORMATION GIVEN BY SUPREME POWER USA LLC ITS AGENTS EMPLOYEES RETAIL DEALERS OR INDEPENDENT CONTRACTORS SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY e REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS 23 THE EXCLUSIVE REMEDY OF THE CONSUMER SUPREME POWER USA LLC SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT THIS DISCLA
21. s also compliant See installation instructions for details Notes This equipment may not be used on coin service provided by the telephone company Party lines are subject to state tariffs and therefore you may not be able to use your own telephone equipment if you are on a party line Check with your local telephone company Notice must be given to the telephone company upon permanent disconnection of your telephone from your line If your home has specially wired alarm equipment connected to the telephone line ensure the installation of this product does not disable your alarm equipment If you have questions about what will disable alarm equipment consult your telephone company or a qualified installer US Number is located on the cabinet bottom REN Number is located on the cabinet bottom 2 Rights of the Telephone Company Should your equipment cause trouble on your line which may harm the telephone network the telephone company shall where practicable notify you that temporary discontinuance of service may be required Where prior notice is not practicable and the circumstances warrant such action the telephone company may temporarily discontinue service immediately In case of such temporary discontinuance the telephone company must 1 promptly notify you of such temporary discontinuance 2 afford you the opportunity to correct the situation and 3 inform you of your right to bring a complaint to the Commission pursuant
22. se in order to validate your warranty eligibility You may want to attach either the original or a photocopy of your sales receipt to this booklet for future reference 21 If this product was received as a gift it is suggested you jot down the date of gift receipt as this information will be valuable should service be required during the warranty period If the equipment is causing harm to the telephone network the telephone company may require that you disconnect the equipment until the problem is resolved Purchase Date or Date Received as Gift Name of Store For instructions on how to obtain warranty service you may call Customer Care at 1 877 722 4908 or you may visit our website at www rca4phones com If you prefer you may write to us at Supreme Power USA LLC PO Box 501045 Indianapolis IN 46250 1045 Please do not send products to this address as it only adds delays in service and may result in lost or damaged product This PO BOX is for written communication only If the equipment is causing harm to the telephone network the telephone company may require that you disconnect the equipment until the problem is resolved Limited Warranty What your limited warranty covers e Defects in materials or workmanship For how long after your purchase e One year from date of purchase Please retain your sales receipt as that will act as your proof of purchase in order to validate warranty status What we will do e Provide
23. to procedures set forth in Subpart E of Part 68 FCC Rules and Regulations The telephone company may make changes in its communications facilities equipment operations or procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations If these changes are expected to affect the use or performance of your telephone equipment the telephone company must give you adequate notice in writing to allow you to maintain uninterrupted service Interference Information This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation Privacy of Communications may not be ensured when using this product If this equipment does cause harmful interference
24. tored in Memory While On hook 1 Press the dial button 2 To select a memory press any number key 0 9 A B C The number in that memory location displays NOTE You may select a different memory location by pressing review 4 or p buttons to scroll through the memories or press a number key 0 9 A B C 3 Press the speaker button or pick up the handset to dial the displayed number Dialing a Number Stored in Memory 1 Liftthe handset or press the speaker button 2 Press the dial button then press a memory location button Cascade Dialing This process allows you to dial a succession of stored numbers from separate memory locations This is useful when you must dial several sequences of numbers such as with frequent calls via a telephone company long distance provider For example Memory location Local access number of long distance company 6 Authorization code ID Long distance phone number Pick up the handset or press speaker Press dial button then press number 6 for the memory location Press dial button then press number 7 for the memory location Press dial button then press number 8 for the memory location The number dials automatically Storing a Pause in Memory The redial button has dual functionality and becomes a pause button when the store button is pressed first it is valid only when storing a number into memory locations Use the redial pause button to insert a pause when a d
25. uttons e The speakerphone indicator light comes on when the speakerphone is in use NOTE Batteries must be installed for the speakerphone to operate Caller ID CID Features IMPORTANT In order to use all of the features of this telephone you must subscribe to two separate services available from your local telephone company the standard Name Number Caller ID Service to know who is calling when the phone rings and Caller ID with Call Waiting Service to know who is calling while you are on the phone CID Summary Screen The Summary Screen shows the current time date and number of new calls to review It is displayed until any button is pressed NOTE The number of new calls is displayed until all new calls have been reviewed Current time Current date Nawealle rr TE NEW htc tP 7 Jt GM CALLA tt Caller ID AU Do oP ele i es number E a p an on Ii H ee mI Ha Caller ID et SO LE name Receiving and Storing CID Calls This unit receives and displays information transmitted by your local company This information can include the phone number date and time or the name phone number date and time The unit can store up to 75 calls for later review When the number date and time The unit can store up to 75 calls for later review The displays reads NEW for calls received that have not been reviewed The screen displays REPT for calls received more than once which have not been reviewed Reviewing
26. ver again press the delete button to erase all of the digits 1 Press the menu button until the screen displays LOCAL AREA CODE 2 Use the number keys to enter the Local Area Code you want 3 Press the menu button to save Dialing Mode This adjustment allows you to select tone touch tone or pulse rotary dialing 1 Press the menu button until the screen displays TONE PULSE 2 Press the review 4 or p buttons to showthe current dialing mode The default is TONE dialing 3 To change the dialing mode press the review 4 or p buttons The display alternates between the two modes 4 Press the menu button again to save 16 NOTE The phone will exit Set Up after 20 seconds if no buttons are pressed REMINDER The time and date are programmed automatically when the first Caller ID record is successfully received after set up Memory You may store information in any of the following memory locations 0 to 9 A B and C See Storing a Pause in Memory and Temporary Tone Dialing for more information Storing a Name and Number in Memory 1 Press the store button The screen displays LOCATION 2 Press the desired memory location 0 9 A B C NOTE You may select memory locations by pressing review 4 OF p buttons to scroll through the memory locations or press the 0 9 A B C 3 Press the store button again to confirm the memory location NOTE If necessary to erase existing memories or if you make a m
27. y location 0 9 A B C to be erased 3 Press the delete button Copying Caller ID Memories to User Memory 1 Press the review 4 or p buttons to view the caller number and name you want to copy 2 Press the store button 3 Press the memory location 0 9 A B C The number flashes if there is a number already stored in the memory location 4 Press the store button to enter the edit mode and then press the store button again to edit the name NOTE You may select a different memory location by pressing review 4 or p buttons to scroll through the memories or press a number key 0 9 A B C 5 Press the store button to confirm and save and wait for three seconds to exit NOTE If the name you want to enter is longer than 12 characters only the first 12 characters willbe copied into memory Storing a Redial Number to Memory 1 Press the store button 2 Press any key 0 9 or quick call buttons A B or C for the memory location lf there is a number already stored in the memory location it will appear on the display Use the review 4 or p button to select a different location Press the store button again to confirm Press the redial button and then press the store button again Enter name if necessary and then press the store button to confirm NOTE If you want to edit the number press the store button again within three seconds When you are finished wait three seconds to exit C1 Go 18 Dialing a Number S
Download Pdf Manuals
Related Search