PYLE Audio PT655E User's Manual
Contents
1. When disconnecting the power cord from the power outlet always take hold of the plug and not the wire and pull free Never connect or disconnect the power plug with wet hands since you may receive an electric shock Remember to disconnect the power plug from the power outlet when you do not intend to use the unit for a prolonged period of time Do not remove the case and bottom panel Any inspections or adjustments inside the unit may lead to malfunctions and electric shocks Do not touch any of the inside parts 00000 0000 OOOD Ventilation warning The normal ventilation of the product shall not be impeded for intended use Installation precautions Do not install the unit in any of the following locations since this may result in deterioration in performance or malfunction Locations exposed to direct sunlight or near objects radiating heat such as heating appliances Locations exposed to moisture or humidity Locations with poor ventilation exposed to dust and dirt Locations which are unstable and not perfectly flat or which are susceptible to vibration BY Do not wipe with thinners Wipe the panels and case from time to time with a soft cloth Using any kind of thinner alcohol or volatile liquid will mar the surface cause blotching on the exterior and erase the markings and should therefore be avoided Do not use insecticide sprays in the vicinity Dripping warning The product shall not be exp2. PYLE 7 PRO STEREO GRAPHIC EQUALIZER SPECTRUM ANALYZER CURSOR CONTROL A lt gt v ot a ore SER PRESET m r nes SOUND MODE A B c D E ROCK Jazz Disco cLassic MEMORY FLAT EQMODE OPERATION MANUAL PRECAUTIONS Thank you for purchasing this HI FI product Taking time to read these operating instructions carefully before use will acquaint you fully with all its features and help ensure optimum performance In order to simplify the explanation illustrations may sometimes differ from the originals CAUTION DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL A The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons A The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance literature servicing instructions in the accompanying the appliance WARNING To prevent fire or shock hazard do not expose this appliance to rain or moisture Gi Power plug
3. MODE SWITCH This EQ spectrum has 5 display modes When pressing DISPLAY MEMORY switch once one of the 5 display modes will be appeared And press once again another one display mode appeared and similarly When you have set the sound level curve of the equalizer personally pressing the DISPLAY MEMORY switch MEMO will be lit up in the display And press A E to memorize it in A E preset knobs 11 USER PRESET SWITCH You can press A E to take your preset sound level curves OPERATING PROCEDURES EQ LINE INJREC PLAY QUT REMOTE SYSTEM TO AMP EQUALIZER INTEGRATED CIRCUIT AC 220 230V 50Hz ce EI POWER CONSUMPTION 10W o e o Switch on the Amplifier or the sound source Select EQ from function selection column at the amplifier or the processor the relative light will be seen when selected Switch on the Equalizer by pressing the Power switch 1 Bars of spectrum display in equalizer will be jumping Press DISPLAY MEMORY switch 5 different kinds of display will be shown When selecting the pre memorized sound level curves pressing the SOUND MODE SWITCH 6 9 the relative word and sound curve will be seen A few seconds later the display will change to spectrum mode automatically If you want to adjust the your favourite sound level curve press EQUALIZER SETTING O gt the display will change from spectrum
4. ight Si pe hatin au 2 7 Kg Note We follow a policy of continuous advancements in development for this reason specifications may be changed without notice
5. mode to EQ mode Choose the frequency firstly you can adjust the frequency band alternatively by pressing ALT or each succeeding frequency band by pressing FINE Then pressing EQUALIZER SETTING A VY to adjust your favourite sound level After adjustment press DISPLAY MEMORY switch MEMO will be seen on the display and press A_E preset Your 5 favourite sound level curves can be stored in the User Preset Switch Press User Preset Switch to take your pre memorized sound level curve EQUALIZER CHARACTERISTIC Variable range t12 dB L amp R independently adjustable Center frequencies 63Hz 160Hz 400Hz 1KHz 2 5KHz 6 3 KHz 16 kHz Total harmonic distortion Less than 0 1 20 Hz to 20 kHz Maximum output voltage 6V THD 0 05 SIN Path as ss narra ai 60 dB 1HF A network 1 V Input impedance 47 kohms Output impedance 15 kohms General Power consumption 10W Power requirements Power voltage ee eee ees 220V 50Hz FOR UK ssa ERS aie 240V 50Hz For U S A amp Canada 110V 60Hz Power consumption 10 Watts maximum Dimensions eee eee nne ene enaeees 420 mm x 93 mm x 215 mm W x Hx L We
6. osed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the product CONNECTIONS E Q CAUTION LINE PLAY DUT IN REC EQUALIZER INTEGRATED CIRCUIT AC 220 230V 50Hz ce EI POWER CONSUMPTION 10W REMOTE SYSTEM TO AMP CA o o RIGHT INTEGRATED CIRCUIT AC 220V 230V 50Hz Connection Precautions When connecting either disconnect the power plug from the power outlet or turn off the unit s power using the POWER switch Before connecting read through the Operation Instructions of the other audio components which will be connected to this unit Check the left and right channels and connect properly L to L and R to R Insert the plugs securely Improper connection can lead to the generation of noise PANEL INFORMATION Sh PT 655E POWER ON mt OFF en PRESET gt os sounnmoe DISPLAY A E c D E pisco crassie MEMORY FLAT EQMpDE ROCK JAZZ 13 19 9 87 6 5 4 1 ON STANDBY SWITCH Depress button to switch ON the unit Press release to switch OFF unit into STANDBY MODE If the unit is left unattended for long periods
7. remove the A C plug from the power socket 2 SPECTRUM DISPLAY This displays the sound level different frequency bands Because the level indicator is connected to the input side the indication does not change when the VOLUME control is turned 3 EQUALIZER SETTING These settings allow the levels approximate to the frequencies indicated above the controls to be continuously controlled from 12 dB to 12 dB for the left and right channels separately Press key lt 4 to shift the lower frequency band and key gt gt to shift the higher frequency band that you want to adjust When arrived to the pre decided band relative indicator will flash Press level UP A control key or level down control key W to the level that you wish to create then press MEMORY key and select A E to program And 5 different sets of personally created sound fields can be stored 4 EQ MODE SWITCH FINE ALT Press the EQ mode switch 4 the word ALT is displayed and the alternating band level can be adjusted And press it once again the word FINE is displayed amp each succeeding sound level can be adjusted 5 EQUALIZER FLAT BUTTON This button is used to turn the equalizer flat This equalizer also has five pre memorized 5 different level curves of sound mode including 6 7 8 9 CLASSIC DISCO JAZZ ROCK SWITCH If you are listening to the above 4 kinds of music press the relative modes of switch The best sound effect will be heard 10 DISPLAY MEMORY
Download Pdf Manuals
Related Search