PYLE Audio PLTDF25 User's Manual
Contents
1. LE AUDIO SYSTEM OWNER S MANUAL nO DVD MPEGH PLAYER WITH USB SD SLOT PYLE PLTDF25 DIGITAL AUDIO OUT MULTI SUBTITLE LANGUAGES FUNCTION ELECTRONIC SHOCKPROOF ESP FUNCTION A V INPUT FM MODULATOR TV TUNER REMOTE CONTROL User s Manual page 1 Page dl N 10 11 15 16 16 16 16 17 17 18 18 20 20 20 21 21 CONTENTS Contents Safetv Information Installation Electric Connection Operation Using The Remote Control General Operation CD MP3 Operation DVD VCD Operation Data Disc Plav Operation Memorv Card Plav Operation USB Device Operation AV In Operation FM Modulator Operation TV Operation Additional Information Setup Svstem Setup Language Setup Audio Setup Digital Setup Specifications Trouble shooting Safetv Information CAUTION This mobile DVD player is a class 1 laser product However this mobile DVD player uses a visible invisible laser beam which could cause hazardous radiation exposure if directed Be sure to operate the mobile DVD player correctly as instructed Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure Do not open covers and do not repair yourself Refer servicing to qualified personnel WARNING To2. Repeat feature does not support VCD 2 0 PBC is on Paragraph Repeat Play Use this function when you wish to repeat play a desired paragraph repeat allows a passage to be repeated continuously Press A B button 14 at the start of the desired passage REPEAT A Press A B button 14 at the end of the passage REPEAT A B Then the unit will repeat playing the passage you just set from A to B To return to normal plavback press A B button again REPEAT CANCEL Searching Directiv bv Chapter or Track Number Use this function to easilv move to the beginning of the chapters or tracks files on the disc Please note This operation can only be controlled from remote control unit 1 During playback pre stop or pause input the chapter or track number you want to using the numeric 0 to 9 User s Manual page 12 2 Waiting for a moment for the plaver locate the track Plavback starts from the selected chapter or track This function is only available for discs on which chapter numbers are recorded Playing In Random Order Press RDM button 33 to switch the random mode on off If the random mode is on tracks files on the disc will be played in a random order On Screen Display Function Press the DISP button 13 on the remote control during playback to display on screen information about the current disc For DVD Pressing and hold
3. if you press button 1 to turn off the unit and then press the button again to turn on the unit the DVD unit will resume playing from the point that it was interrupted During disc playback if you press the MODE button 3 to switch to other mode and then return to DVD mode again the unit will resume playing from the point that it was interrupted Reset Function RESET button on the housing must be activated with either a ballpoint pen or thin metal object The RESET button 12 is to be activated at the following times After initial installation of the unit when all wiring is completed Some of the function buttons do not operate Error symbol appears on the display Note If the unit still does not function after you have pressed RESET try cleaning the connectors which link the panel and the main housing with a cotton swab moistened with isopropyl rubbing alcohol If it still does not work bring the unit to your dealer for servicing or advice CD MP3 Operation Plavback 1 Inserta disc with the label side facing up The disc will be drawn into the plaver automaticallv The information for the current disc will be shownon the screen 2 5 26 00 01 22 3 ForMP3 SONG DANZA ARTIST NTIC SATR WORKAREA D Q 01 YEA 01 DANZA 02 WFR 03 GETGUI jj 03 PUEDE_ J 04 ETER 3 05 EYDA J 06 FIRST j 3 07 ST 0 H 08 FIRIDAY N
4. CHANNEL MONO L CHANNEL MONO R Notes Some discs only contain one soundtrack language Multi audio Language Function For DVD discs which have multiple language soundtrack you can change the language track temporarily during playback Each time you press the AUDIO button 22 during playback the sound cycles between the audio tracks recorded on the disc O 1 ENGLISH 2CH O 2 ENGLISH 5 1CH Notes The language number is different according to the disc Some discs only contain one soundtrack language Not all discs will allow changing the subtitle during playback In these cases select subtitle from the DVD s menu Multi angle Function For DVD discs in which scenes have been filmed from multiple angles the viewing angle can be switched during playback Press ANGLE 25 during playback The following information will be shown on the screen ANGLE 1 The angle setting cycles between the available viewing angles recorded on the disc each time the button is pressed Notes The ANGLE function is only available for discs which support it and programs in have been recorded Depending on the disc the angle may switch in one of two ways 1 Seamless The angle switches smoothly 2 Non seamless When the angle is switched a still picture is displayed first after which the angle switches The angle number varies from disc to disc Program Play Function In VCD CD pla
5. If you wish to change this enter 0000 and when prompted enter a differetn 4 digit number PARENTAL CONTROL LEVEL Use this function to restrict the viewing of movies to children of appropriate age levels only 1 Press A or W button to select PASSWORD then press ENTER button 2 The password input mode is activate Use the numeric keypad 0 to 9 to input the 4 digit password and then press ENTER button The default password is 0000 upon shipment from the factory 3 Press 4 or w button to select RATING then press ENTER button The restriction level parental level input display appears 4 Press A V button to select the restriction level 1 to 8 and then press ENTER button 5 When the setting is complete press SETUP button to return to normal mode DEFAULT Selecting DEFAULT and confirming it will restore all the System Settings to those programmed at the factory except the Parental Controls and Password Language Setup When you open the language setup menu you will see the language setup screen LANGUAGE SETUP OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG DIVX R EXIT SETUP There are many choices for the menu DVD and subtitle languages You set the languages for the DVD player in different menus than the languages for playback and subtitling on the discs Of course options vary from disc to disc so some settings may not be available OSD LANGUAGE
6. Time then press ENTER button 18 to confirm ZOOM Function Press ZOOM button 24 to increase or decrease the size of the image Please note that the ZOOM function is only available on discs which support it ZOOM 27Z00M 3 ZOOM 4 ZOOM1 2 ZOOM 1 3 ZOOM 1 4 ZOOM OFF In zoom mode press A W lt gt buttons 16 to move pictures up down left right direction in order to find the area of the picture that you want to zoom into Multi subtitle Language Function Some DVDs have multiple subtitle languages The subtitle language can be changed or subtitles hidden during playback Press the SUB T button 23 during plavback The following information will be shownon the screen Each time vou press the button the subtitle cvcles between the different languages recorded on the disc Notes Not all discs will allow changing the subtitle during playback In these cases select subtitle from the DVD s menu There may be a delay before the selected subtitle appears For some discs the subtitles will be displayed even when this is set to off The number of available languages have one subtitle language available Switching the Audio Tracks For some VCD SVCD discs which have multiple audio tracks you can change the audio track temporarily during playback Each time you press the AUDIO button 22 during playback the sound cycles between the audio tracks recorded on the disc CHANNEL STEREO
7. User s Manual page 16 2 In DVD mode press MENU button continuallv vou can adjust the FM frequency between 87 7 88 9MHz adjustment unit is 0 2 MHz step 3 To tune radio to the corresponding frequency you can listen to the audio of the DVD player by radio equipment TV Operation Press MODE to switch to TV mode In TV mode the function of the buttons served in DVD mode is locked Searching Channels Pressing MENU button will enter into automatically searching state Then press WI button to start searching TV channels and press H button to stop searching Selecting Channels Press WI CH button to choose channel upward press Kd CH button to choose channel downward When the TV channel is a one digit figure just press the corresponding digit button When the TV channel is a two digit figure press the GOTO button to switch to mode and then input the two digits by the numeric button 21 Volume Adjustment Press VOL VOL button adjust volume level MUTE Press MUTE button to mute the sound press it again to resume User s Manual page 17 Additional Information About Parental Control DVD discs have a parental level assigned to the disc The range of parental controls is from 1 to 8 In general this range corresponds to established movie rating systems Movie rating systems may vary depending on the country you live in Toward the bottom of this page is a small chart
8. showing the rating system and corresponding Parental Control ratings for the USA The player can be setina similar way If the player s parental level is set to 8 it will play all discs If the player s parental level is set below 8 only discs with a lower or equal parental level will play For example if the player is set to 5 only discs with parental control ratings of 1 5 will play To play adisc with higher number rating you must change the player s rating to a higher number Consider a disc that is suitable for most audiences and is rated as level 2 for the most part However in the middle there are also scenes rated at 5 amp 7 not suitable for children Alternative scenes with lower rating are included The player plays the highest rated scene that the parental setting allows A section of the disc can have several different sequences that vary in parental control level In the above example of a disc with parental control the player will showa different section depending on the parental control level set in the player s menu In this way parents can control the content of films and there is no indication that any censorship has occurred Unlock Unlock 1 KIDSAFEJ 5 PG R 216 6 3 PG 7 INC 17 4 13 8 ADULT About MP3 What is MP3 whose official name is MPEG 1 Audio Layer 3 is acompression standard prescribed by the ISO the International standardi
9. unit to ensure proper installation The use of unauthorized parts can cause malfunctions Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle Install the unit where it does not get in the driver s way and cannot injure the passenger if there is a sudden stop like an emergency stop If installation angel exceeds 30 from horizontal the unit may not perform properly Aw Avoid installing the unit where it will be subject to high temperature such as from direct sunlight or from hot air from the heater or where it would be subject to dust dirt or excessive vibration The unit is designed for home use and car use When installed on the car please follow the installation instruction below SCREW TAKE OUT SCREWS LOCK THE DVD MECHANISM SCREW Notes 1 First remove the two screws that lock the DVD mechanism then attach the brackets on both sides of unit with screws m4X5 last install the unit with screws m5X25 2 When fix the unit you can slide the screw m5X25 to left side or right side to meet your needed position In the figure above select two holes among position that marked 1 2 3 and 4 to fix the bracket User s Manual page 4 ELECTRIC CONNECTION METHODA Use the conversion cable to obtain DC 12V power supply input through the AC DC ADAPTER or the cigarette lighter according to the illustrator as follow
10. 09 HOWDEE A 10 IT_S WORKAREA A WORKAREA C 1 Press lt gt button to move between work area A Band C 2 Press A W button or input relative numeric button to select the desired folder or file of this work area 3 Press ENTER button 18 to confirm the selected item 4 Return to the beginning of the previous track file by pressing the 14 button 4 5 Advance to the beginning of the next track file by pressing the gt button 5 Pause Playback Press Pll button 2 to pause playback Press it again to resume playback Stopping playback Briefly press the m button 31 to stop the playback When the button is pressed and then press Pll button 20 normal playback will resume Press button 31 twice and then press Pil button to stop the playback and go back to first track Fast Forward Fast Reverse 1 Fast Forward Press button 28 during playback Each time the button is pressed the speed of fast forward increases as follows FORWARD 2X 4X 8X 20X In fast forward state press button 2 to return to normal playback 2 Fast Reverse Press button 29 during playback Each time the button is pressed the speed of fast reverse increases as follows BACKWARD 2X 4X 8X 20X In fast reverse state press pjj button 2 to return to normal plavback Repeat Plav Paragraph Repeat Plav Repeat play Use this function when you wish to repeat a whole
11. 18 to confirm the selected item 4 In picture views or movie playback mode if you want to return to the previous menu press m STOP button Memorv Card Plav Operation This disc player offers you a memory card slot 10 Using the SD MMC card When you insert a SD MMC card into the Memorv card slot 10 the DVD plaver will read the SD MMC card automaticallv The unit gives first prioritv to the card in the slot If you insert a disc into the disc slot 7 while reading the SD MMC the unit will play the disc Press m 31 button to enter into PRE STOP mode then press GOTO button 30 to switch back to the reading card mode Note While reading the memory card please don t touch or take out the card If the is unable to read the card please check if the card is in good condition You may also wish to try removing the card fully from the reader and reinserting it again USB Device Operation This disc player offers you an USB interface 9 An USB device can be connected to this port Using the USB device When you insert a USB device into the USB interface 9 the DVD player will read the USB automatically The unit will give priority to the latter If insert a disc into the disc slot 7 or inset a SD MMC card into the SD MMC interface 10 while read the USB device the unit will play the disc or the SD MMC Press m 31 to enter into PRE STOP mode then press GOTO button 30 to switch to the re
12. 6 ZOOM Press the button to change the scaling 17 AlV P lt In some menus A V 4 buttons served as cursor buttons to move to up down left right 18 ENTER Confirm the Track Chapter selected with the numeric buttons or selected with the cursor buttons on TV screen User s Manual page 7 19 SETUP Press the button to enter into the system setting menu 20 TITLE PBC In DVD or VCD PBC mode is on mode press TITLE PBC button to display the TITLE menu thatis stored in disc 21 0 9 Numeric buttons 22 AUDIO On multi audio sound track disc press to change the AUDIO sound track 23 SUB T Change the subtitle language on multi subtitle language DVD disc 24 MUTE Press it to mute the sound press it again will resume the sound 25 ANGLE Change the view angle on multi angle DVD disc 26 VOL VOL Press the VOL to increase the volume level Press the VOL to decrease the volume level 27 MENU press the button continually you can adjust the FM frequency between 87 7MHz 88 9 MHz 28 gt gt Press the button to search forward rapidly 29 Press the button to search reverse rapidly 30 GOTO Press the button to select th bookmark that you set 31 8 STOP Press it for the first time to pre stop playback press it again to stop playback 32 PROG Press the button to play the track orderly by what you programmed 33 RDM Press the button to play all tracks o n disc randomly Pres
13. ENGLISH GERMAN SPANISH FRENCH PORTU GUESE ITALIAN RUSSIAN POLISH AUDIO LANG ENGLISH GERMAN SPANISH FRENCH PORTU GUESE ITALIAN RUSSIAN POLISH SUBTITLE LANG ENGLISH GERMAN SPANISH FRENCH PORTU GUESE ITALIAN RUSSIAN POLISH MENU LANG ENGLISH GERMAN SPANISH FRENCH PORTU GUESE ITALIAN RUSSIAN POLISH Audio Setup When vou open the AUDIO menu vou will see the following screen AUDIO SETUP AUDIO OUT KEV EXIT SETUP 1 AUDIO OUT Change among SPDIF OFF SPDIF RAW and SPDIF PCM 2 KEY Change among b 4 2 0 2 4 Digital Setup When you open the DIGITAL SETUP menu you will see the DIGITAL SETUP screen DIGITAL SETUP OP MODE DYNAMIC RANGE DUAL MONO EXIT SETUP 1 OP MODE Change among LINE OUT RF REMOD LINE OUT LINE OUT mode with digital dialog normalization RF REMOD RF REMODULATION mode with heavy compression and digital dialog normalization 2 DYNAMIC RANGE Change among FULL 6 8 4 8 2 8 OFF 3 DUAL MONO Change among STEREO MONOL MONOR MIX MONO User s Manual page 20 Specification 1 Supplv voltage Power Supplv Requirements 12V DC 11 15V test voltage 14 4V negative ground Current consumption Less than 2 A 2 Signal svstem Compositive video 1 0 0 2Vp p 750 3 Discs played 1 DVD VIDEO disc 2 Compact disc CD DA CD R CD RW MP3 3 VIDEO CD 4 Audio output level 10KQ 2ch 2 0 0 5Vrms 5 Audio signal output
14. NCTION OF KEYS Front panel Loe BI AZIONI 4 Remote Control OOA a O So Io a 9 CEA C eva VO 2 Ko A 1 0 POWER Press itto turn the unit on off 2 Pll Pause plavback a disc press it again to resume plavback 3 MODE Change between DVD TV and AV mode 4 144 Press the button to skip back one track 5 ppl Press the button to skip to the next track 6 EJECT Press it to eject the disc from the disc slot 7 7 DISC Slot Gently insert a disc with the printed side uppermost into the disc slot 7 until you feel some resistance 8 AV IN terminals Connect peripheral audio video system to the unit through the AV IN terminals 9 USB port You can connect an USB driver through this port 10 SD MMC card slot You can insert SD MMC card into the slot 11 IR Point the remote control handset to the Remote Control Sensor IR 11 Press the function kevs on the handset to control the svstem 12 RESET Press RESET button 12 to restores the default setting 13 DISP Displav statistical disc information during plavback 14 A B A B repeat allows a passage to be repeated continuously 15 RPT Switch the repeat mode of discs 1
15. VD player the unit cannot play the disc When l insert a DVD disc there isa window shownon the screen that requires entering 4 characters password why User s Manual page 15 The current disc has a Parental Control level and the player s parental level is set below the level of the disc To view this disc you should enter the correct password to play the disc normally NOTE For how to set the Parental Control level please refer to Parental Control on page 18 Data Disc Play Operation When you insert a data disc including audio MP3 movie MPEG or picture JPG files into the disc slot the following media play window will be shown on the screen SONG ALWAYS WORK AREA D ARTIST ATLANTIC STARR 01 ALWAYS ij 02 BOUNGE 03 CANON_D i 04 ETERNAL i 05 EVERYDA 06 FIRST_L 07 FIRST_0 H 08 FIRIDAY_ ij 09 HOW_DEE 10 IT_S_RA g WORK AREA A gt WORK AREA WORK AREA C 4 O B B Work area A folder list Work area B files list Work area C 1 plavback audio mode default 2 viewing picture mode 3 plavback movie mode Work area D file information display Somes 02 THE_DEF 03 IN_THE 04 DONNA_S 05 HELL_FR 6 06 STOLEN_ 07 RADIO_G 1 Press lt p gt button to move between work areaA work area B and work area 2 Press button to select the desired folder or file of this work area 3 Press ENTER button
16. ading USB mode Note When reading the USB device please don t touch or take out the card If the is unable to read the device please check if the device is in good condition You may also wish to try removing the card fully from the port and reinserting it again The main unit can only support the standard USB memory disc which is approved by Microsoft USB MP3 player is not a standard which means different brand name or different models have their own standard So our product cannot support every MP3 player When connecting an player and there has normal battery in the player non rechargeable battery you should remove the battery from the MP3 player then connect it to the USB port Otherwise it may cause battery burst When in USB play mode be sure not to remove the USB device from the USB port AV IN Operation This disc player offers you the option of using the auxiliary front panel A V input jack to connect a video game digital camera camcorder or other units you wish to use in your mobile video system D E EE YELLOW to VIDEO OUT RED to AUDIO Rch OUT WHITE to AUDIO Lch OUT FM MODULATOR OPERATION This unit has the ability of transmit the audio to radio equipment 1 In TV mode press th MENU button 27 twice to switch to FM MODULATOR mode Press MENU button continually you can adjust the FM frequency between 88 7 88 9MHz adjustment unit is 0 2MHz step
17. age Do not place discs in the following places 1 Direct sunlight 2 Dirty dusty and damp areas 3 Near car heaters 4 On the seats or dashboard Disc Cleaning Use adry soft cloth to wipe the surface If the disc is quite dirty use a soft cloth slightly moistened with isopropyl rubbing alcohol Never use solvents such as benzene thinner or conventional record cleaners as they may mar the surface of the disc User s Manual page 2 Label side up Donottouch the underside of the disc 29 Do not li bend e amp PA Wipe the disc from center toward the outside edge Preparing New Discs with Rough Spots new disc may have rough edges on its inside and outside edges If a disc with rough edges is used the proper setting will not be performed and the player will not play the disc Therefore remove the rough edges in advance by using a ballpoint pen or pencil as shown on the right To remove the rough edges press the side of the pen or pencil against the inside and outside edges of the disc Rough spots outside edge Ball point pen 0 or pencil Rough spots on inside edge User s Manual page 3 Installation Notes Choose the mounting location where the unit will not distract the driver Before the installing of the unit connect the wiring temporarily and make sure it is all connected up properly and the unit and the system works Use only the parts included with the
18. characteristics 1 Frequency response 20Hz 20 Khz 2 S N ratio 80 dB JIS 3 Wow and flutter Below measurable limits Note Specifications and design are subject to modification without notice due to improvements in technology User s Manual page 21 Trouble Shooting If it appears that your DVD unit is faulty please first consult this checklist It may be that something simple has been overlooked Under no circumstances should you try to repair the player yourself as this will invalidate the warranty Only qualified service personnel can remove the cover or service this player No Power If the power supply is connected to the car accessory circuits but the engine is not turned on switch the ignition key to if the fuse is blown replace the new fuse Check if the on off button on the front of the player is set to on No Picture Check if the monitor or TV is switched on Check if select proper mode has been selected such as Disc Play mode or AV mode Check the video connection Distorted Picture Check the disc for fingerprints and clean it with soft cloth wiping from centre to edge Sometimes a small amount of picture distortion may appear This is not a malfunction Completely Distorted Picture The disc format is not according to the TV set used PAL NTSC No Color in Picture The disc format is not according to the TV set used PAL NTSC Disc Doe
19. disc a track or a directory in the disc 1 Press RPT button 15 repeatedly to select different repeat modes 2 For different types of discs pressing RPT button 15 has different effects For CD REP 1 REP ALL REP OFF For MP3 REP 1 gt REP DIR gt REP ALL REP OFF User s Manual page 10 Note REP 1 Oniva track file is plaved repeatediv REP DIR Only tracks files in a folder are repeatedly playing REP ALL An entire disc is played repeatedly REP OFF The mode returns to normal playback Paragraph Repeat Play A B repeat allows a selected passage to be repeat continuously Press A B button 14 at the start of the desired passage REPEAT A Press A B button 14 at the end of the passage REPEAT A B Then the unit will repeat playing the passage you just set fromA to B To return to normal playback press A B Button again REPEAT CANCEL Playing In Random Sequence Press RDM button 33 to switch the random mode on off In this mode tracks files on the disc will be playedina random sequence User s Manual page 11 DVD VCD Operation Playback with PBC Menu Some VCD or SVCD discs containa simplified menu to assist in selection of tracks To view this menu requires a system called Playback Control PBC PBC creates this disc directory on the fly if PBC has been enabled To turn PBC On press the PBC button 20 Plea
20. ess button 29 during playback Each time the button is pressed the speed of fast reverse increases as follows BACKWARD 2X 4X 8X 20X In fast reverse mode press Pll button 2 to return to normal plavback Finding the Beginning of Chapters or Tracks Files Use this function to easilv move to the beginning of the chapters or tracks files on the disc During playback each time press the bi button 5 or M4 button 4 to skip and playback the chapter track gt Press the button to start playback From the beginning of the following chapter or track file M4 Press the button to start playback from the beginning of the previous chapter or track file Note 1 Some DVDs do not have chapters 2 For some VCD2 0 discs PBC control 114 or bb 44 buttons may be unavailable Repeat Play Paragraph Repeat Play Repeat play Use this function when you wish to repeat an entire disc a track or a chapter in the disc 1 Press RPT button 15 repeatedly to select different repeat modes 2 For different types of discs pressing RPT button 15 has different effects For DVD REP CHAPTER REP TITLE REP OFF For VCD SVCD REP 1 ALL REP OFF NOTES REP 1 Only a track file is played repeatedly REP CHAPTER Achapter is played repeatedly REP TITLE A title is played repeatedly REP ALL an entire disc is played repeatedly REP OFF The mode returns to normal playback
21. g image to avoid burn in If SCREEN SAVER is enabled in the Setup menu after a few minutes of displaying a moving screen saver image SETTING the TV TYPE TV types can vary based on their aspect ratio The common monitors fall into one of three categories 4 3 PS Pan and Scan 4 3 LB Letterbox or 16 9 Widescreen Playing a video recorded in one aspect ratio ona monitor witha different ratio can result in some mismatches and undesirable display distortion or cutoffs Read the following to assist you in setting up the TV type 4 3 PS PAN SCAN Select this when connected toa conventional 4 3 size monitor The picture will fill the entire TV screen However due to the mismatch in aspect ratio parts of the movie at the extreme left and right sides will not be visible when playing a 16 9 size movie 4 3 Pan and Scan format is the factory default setting for this product User s Manual page 19 4 3 LETTER BOX When you are playing a widescreen format video on a normal 4 3 monitor the best way to view this is in 4 3 letterbox format You can see the full picture but there will be a black band at the top and bottom of the screen 16 9 WIDESCREEN Select this when connected to a wide screen TV PASSWORD The Password system is used in conjunction with the Parental Controls settings to prevent a young person from changing the settings without permission The factory default password is 0000
22. ing DISP button 13 on the remote control to display information in the following manner O 1 1 ENG 51CH Gal1 4ENG 20 OFF DVD TT 1 2 CH 1 1 C 00 10 08 DVD TT 1 2 CH 1 1 T 00 46 37 DVD TT 1 2 CH 1 1 T 00 25 01 DVD TT 1 2 CH 1 1 C 00 05 04 1 TT Displays the current title number and total title number 2 CH Displays the current chapter number and total chapter numbers 3 Displays the playing time for the entire disc 4 C Displays the remaining playback time for the current chapter 5 T Displays the total playback time for the current title 6 T Displays the remaining playback time for the current title User s Manual page 13 7 C Displays the total playback time for the current chapter 11 ENG I SICH MJIMENG 2 OFF Displays the current disc language audio type subtitle language and play angle For VCD VCD TRK 9 18 PBC CX f 00 00 12 VCD 9 18 lt PBC CX 00 00 12 VCD TRK 9 18 PBC CX 00 00 12 VCD TRK 9 18 lt PBC CX 00 00 12 VCD TRK 9 18 lt f PBC CX 00 00 12 GOTO Function The GO TO function allows you to select a specific place in the program where you want to begin playback The function is displayed slightly differently between DVD and VCD modes Press GOTO button 30 the screen will display the following message FOR DVD DVD TT 01 12 CH001 001 00 00 39 Use the number keys 21 to input the Track and
23. l System Start Up Be sure to press the RESET button 12 When using the unit for the first time after all connections are completed correctly 1 Turn off the unit power 2 Press RESET with a ballpoint pen or similar pointed object Turning Power On and Off Press button 1 orinsert a disc to turn on the unit When system is on press button 1 to turn off the unit Loading Removing a Disc 1 Insert the disc into the disc slot 7 with the printed side facing up The player will play the disc automatically 2 Whenever press a button 6 to eject the disc Adjusting the volume level Press VOL VOL button 26 to adjust the volume level Input Source Select Press MODE button 3 to switch to the desired input source The mode will change each time the button is pressed DVD TV AV In TV mode pressing MODE SCAN button 3 on the unit for several seconds will enter into searching state automatically ESP Function This unit features ESP anti shock protection It works by playing ahead and buffering the stored part of the program playing it back when the realtime portion of the program has been disrupted Depending the listening viewing mode you are in the amount of time of disruption which can be hidden is as follows User s Manual page 9 CD VCD 18 seconds MP3 160 seconds DVD 6 seconds MPEG4 20 seconds Last Position Memory Feature During disc playback
24. on and then use A W buttons and ENTER button 18 to change your selection 4 When the setting is complete press SETUP button 19 to return to normal mode When settings are changed old settings are overwritten Make note of the current settings before making changes If the vehicle s battery is disconnected the settings will be cleared and will return to the factory settings when power is next applied System Setup When you open the setup menu you will see the system setup page at first see below SYSTEM SETUP TV SYSTEM SCREEN SAVER PASSWORD RATING DEFAULT EXIT SETUP TV SYSTEM TV SVSTEM is used to select the TV output mode This plaver can plav discs recorded in either PAL or NTSC formats Select NTSC format when the unit is connected to NTSC TV Select PAL format when the unit is connected to PAL TV User s Manual page 18 You can either choose AUTO SELECT which will sense the type of monitor attached to the output and select NTSC or PAL as needed If you know the type of monitor you should choose the type in this menu rather than letting AUTO SELECT do it for you This is because there may be an undesirable small delay and some flickering of the screen during the AUTO SELECT process SCREEN SAVER As with computer monitor video screens can burn in if a still image is displayed too long on the screen This unit features a screen saver which produces a movin
25. reduce the risk of fire or electric shock do not expose this equipment to rain or moisture To reduce the risk of fire or electric shock and annoying interference use only the recommended accessories This device is intended for continuous operation This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macro vision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macro vision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macro vision Corporation Reverse engineering or disassembly is prohibited Region Management Information This mobile DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc If the Region number described on the DVD disc does not correspond to the Region number of this Mobile DVD Player this Mobile DVD Player cannot play this disc DISC NOTES Discs Note You can playback the following discs 12CM on the receiver DVD VIDEO DVD AUDIO VIDEO CD AUDIO CD MP3 WMA JPEG MPEG4 Handling and Cleaning Dirt dust scratches and warping discs will prevent proper operation Do not place stickers or make scratches on discs Do not warp discs Adisc should always be keptin its case when notin use to prevent from dam
26. s T JE RF IN from ANT Eia NPY Dezi Jo H N REMOTE SENSOR AUDIO our DIGITAL AUDIO OUT VIDEO QUT According to the illustrator below install the unit in the car and obtain DC 12V power supply input Th CIGARETTE LIGHTER YELLOW to VIDEO OUT RED to AUDIO Rch OUT WHITE to AUDIO Lch OUT REMOTE CONTROL RECEIVER 1I RF IN from ANT AS oa WW DE 12v IN oo E ou REMOTE SENSOR DIGITAL AUDIO OUT VIDEO OUT FUSE IR Sensor If you need to mount the DVD player a location which is inaccessible or where the line of sight between the remote control and the face of the plaver is interrupted connect the remote USE GROUND B BLACK VELLOW to VIDEO OUT RED to AUDIO Rch OUT WHITE to AUDIO Lch OUT REMOTE CONTROL RECEIVER MEMORY BATTERY B YELLOW IGNITION SWITCH ACC RED sensor as shown in the diagram above Mount the IR Sensor in a convenient location which is in direct line of sight with the use location of the remote control Point the remote control at the sensor to operate the player User s Manual page 5 OPERATION LOCATION AND FU
27. s Not Play Ensure the disc label is upwards Clean the disc Check if the disc is defective by trying another disc No Sound Check the audio connections The Plaver Does Not Respond To the Remote Control Aim the remote control directly at the sensor on the front of the player Remove any obstacles which may interfere with the signal path Inspect or replace the remote control battery Distorted or B W Picture The disc format is not according to the TV set used PAL NTSC No Audio at Digital Output Check the digital connections Check the Digital Audio menu to make sure that the digital output is correctly set Check if the audio format of the selected audio language matches your receiver s capabilities Buttons Do Not Work Press Reset button on the housing of the DVD unit User s Manual page 22
28. s again to cancel the function USING THE REMOTE CONTROL Preparing and Using The Remote Control Before using the remote control please take the transparent insulator strip off the bottom of remote control Point the remote control at the remote sensor 11 from no more than 6 feet away If the IR sensor is exposed to direct sunlight the remote control may not be able to communicate with it properly You may need to relocate or shield the IR sensor If you are more than 30 away from being directly in front of the IR sensor the remote control may be unable to communicate properly The remote control is small lightweight precision device To avoid damage short battery life operational erros and poor response observe the following Do not subject the remote control to excessive shock Do not put in a pocket Keep away from food moisture and dirt Do not place in direct sunshine Battery replacement The remote control uses a lithium button type battery model CR 2025 3V Do not use any other kind of battery in the remote Follow these instructions when installing or replace the battery 1 Remove the battery holder by pressing the locking tab with your thumb 2 Replacing the battery Replace the battery with the same type and the side facing up 3 Closing the cover Gently push in the holder until securely locked into place User s Manual page 8 GENERAL OPERATION Initia
29. se note that PBC does not accommodate the following features REPEAT RANDOM A B PROGRAM and GO TO Playback With Menu If the DVD disc or VCD SVCD discs has a menu system and the PBC playback Control setting is on you can display the menu which allow you to select the program to playback by pressing PBC button 20 1 Move the cursor buttons A V 4 b to highlight the item you wish to select 2 Press ENTER 18 to select this item Some discs offer a series of menus which with a wide variety of choices You can continue to navigate the menu further using a combination of the cursor buttons A V lt gt the ENTER button 18 Pausing playback To pause playback press Pll 2 Press again to resume playback Please note that when playback is resumed there may be a short delay in either the image or sound This is normal Stopping playback Briefly press the button 31 to stop the Unit playback When the button is pressed and then press Pll button 2 resume to the normal playback Press button 31 twice and then press gt Il 20 to stop playback and go back to the first track chapter Fast Forward Fast Reverse 1 Fast forward Press gt gt button 28 during playback Each time the button is pressed the speed of fast forward increases as follows FORWARD 2X 4X 8X 20X In fast forward mode press Pil button 2 to return to normal playback 2 Fast Reverse Pr
30. yback mode press PROG button 32 to activate program edit interface as follow 1 __ 50 1 9 __ 13 __ 2 __ 6 __ 10 __ 14 __ 3 __ 7 __ 11 __ 15 __ 4 __ 8 __ 12 __ 16 __ PLAY CLEAR User s Manual page 14 Use A V lt p cursor button to select the item that you want to program 1 The item you selected will become highlighted 2 Input the track number that you want to program by numeric buttons 0 9 on the remote control 3 Press A V lt gt cursor buttons to move to PLAY operation button and then press ENTER button 18 to program the playback In DVD MP3 playback mode press PROG button 32 to activate program edit interface as follow Tc TC TC 1 5 9 13 prose f jj jj estes perte deci eso a PLAY CLEAR Use A V lt p cursor button to select the item that you want to program 1 The item you selected will become highlighted 2 Input the track number that you want to program by numeric buttons 0 9 on the remote control 3 Press A V lt gt cursor buttons to move to PLAY operation button and then press ENTER button 18 to program the playback Frequently Asked Questions l inserted a DVD disc but it cannot be played The message REGION ERROR is displayed DVD players and discs allhave REGION CODES If the region code number on the DVD disc does not correspond to the region number of this D
31. zation organization and MPEG which is a joint activity institution of the IEC MP3 files contain compressed audio data MP3 encoding is capable of compressing audio data at extremely high ratios reducing the size of music files to as much as one tenth their original size This is achieved while still maintaining near CD quality The MP3 format realizes such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds Corresponding file systems This device supports discs formatted with iso9660 level 1 or level 2 Under the iso9660 standard there are some restrictions to remember The maximum nested folder depth is 8 including the root directory The number of characters for a folder file names are letters A Z all caps numbers 0 9 and _ underscore This device also can plav back discs in Joliet Romeo etc and other standards that conform to iso9660 However sometimes the file names folder names etc are not displaved correctiv Setup In DVD mode when the disc is plaving or in stop mode press SETUP button 19 to enter setup menu 1 When the cursor is in the upper part of the menu use gt buttons to move between the different pages 2 Press W button to move the cursor to the setup page below Then you can use the A W buttons to move between the different setup options 3 Press gt or ENTER button to move to the choice list of each setup opti
Download Pdf Manuals
Related Search