ProForm 67015 User's Manual
Contents
1. EDA OE OAM www proformparts com tech CAUTION FAN BLADES CAN CAUSE INJURY TO AVOID PERSONAL INJURY KEEP CLEAR FROM FAN BLADES FAN BLADES MAY START AT ANY TIME Part 67015 15 Mustang Fan with Thermostat The included bracket see image A is used for the overflow tank Using your original screws mount the bracket to your radiator Using the angle brackets See image B attach your fan to the top of the radiator positioning it between the overflow tank and radiator tank IMPORTANT If not using an illuminated switch disconnect the switch ground EDA OE OAM www proformparts com tech CAUTION FAN BLADES CAN CAUSE INJURY TO AVOID PERSONAL INJURY KEEP CLEAR FROM FAN BLADES FAN BLADES MAY START AT ANY TIME Part 67017 Universal Fan with Thermostat Bolt on Method Clamp on Method Part 67015 an 15 Mustang Fan with Thermostat on reverse side by jam Gie DUS Fate INSTALLATION INSTRUCTIONS Fan may be attached to the radiator horizontally or vertically Mount fan with brackets using either the bolt on or clamp on method and affix the threaded rods and Thermostat Sensing Bulb brackets to the fan accordingly NOTE e Use star nuts as shown to stabilize the threaded rods e The thermostat sensing bulb MUST contact the radiator surface for accurate temperature readings e To avoid damage do not over tighten fan to radiator REQUIRED CONNECTIONS 1 Disconnect v2. ehicle battery 2 Attach the positive terminal to a low amp 12 volt positive power source such as fuse box using the wire provided in the fan kit OPTIONAL CONNECTION Attach the positive terminal to an ignition source to stop the fan unit from operating after the entire is tuned off 3 Connect the B terminal to a high amp 12 volt positive power source such as the positive side of battery or alternator using the wire and inline circuit breaker included in kit Circuit breaker is marked for proper installation 4 Connect the G terminal to ground such as chassis negative side of battery using the wire provided in the kit 5 With the wire and 3 way connector provided splice into the A C clutch positive wire Connect the other end of the wire to the O terminal of the control box NOTE Air conditioning relay activates fan when A C is turned on 6 Adjust thermostat to desired temperature within 180 240 range Radiator Front MANUAL SWITCH INSTALLATION OPTION permits on off operation manually Switch not included Must purchase separately 1 Attach the M terminal to terminal 1 on the switch 2 Attach terminal 2 to 12 volt positive source 3 Attach terminal 3 to ground Note To prevent the fan from thermostat activation omit the lead to the positive terminal of the control box B G amp M must remain connected Control Box Termina
3. ls amp Connections Mandatory Connections Optional Connections 12 volt low amp source M Manual switeh G Ground B 12 volt high amp source C Air conditioning relay Control Box Ground peay aniisod 9 12 Volt Source 12 Volt High Amp Positive Ground Illuminate switch not incl IMPORTANT If not using an illuminated switch disconnect the switch ground
Download Pdf Manuals
Related Search