Polaroid PDM-0990DS User's Manual
Contents
1. The items included in this sub menu are shown as the left 37 System Setup Dolby Digital Setup continued Dolby Digital Setup Dual Morne Dynamic stereo L har R Mano Mis Mona Dual Mone 1 1 setup Dolby Digital Setup Dual Marva Dynamic PL SL EI ROI Set Ore Ta Full Video Setup Page Video Setup page sharpness Low Brightness 00 Contrast 00 Go To Video Setup Page Video setup page Sharpness low High Brightness Contrast 00 Low Sharpness PS a PR ST TI E E a 4 Mediumi 1 Dual Mono This item is used to set the channel output mode Press the a or e button to highlight this item Press the ENT or gt to enter the item It includes stereo L Mono R Mono and Mix Mono Stereo by default Press the or e button to choose the proper one Press the ENT button to confirm your selection Press the 4 direction button to exit this item 2 Dynamic This item is used to adjust compression rate to get compression effects Press the a or w button to highlight this item Press the ENT or gt to enter the setup of this item Then the item will show as the left Press the a or w to choose the proper level Press the ENT button to confirm your selection Press the 4 direction button to exit this item linear dynamic different signal The items included in this sub menu are shown as the left 1 Sharpness This item is used to adjust2. Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Characteristic Features The Docking Station is designed for connecting to a compatible portable DVD player It features an electrical connection interface that enables the portable DVD to effectively serve as a desktop DVD It is integrated with connectors for peripheral devices to eliminate complicated connections and save valuable space around the unit With the Docking Station you can enjoy the expansion possibilities of desktop DVD with the portability of a portable DVD Multiple Mode e DVD e TV e External Audio amp Video mode AV Input amp AV Output A V input and output extend the connections for a portable DVD player Switching Power Adapter Automatically adapts to the voltage required TV Functions e Clear TV signal reception e Search for TV channels automatically e Automatically memorize the channels Clock Function Displays the time even if in stand by mode or if there is no DVD player attached Timer will turn the docking station and attached DVD player on and off at desired times Front View Front Panel Drawing 1 Display panel Displays the time and status 2 Remote Sensor Receives remote control signal for op
3. Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DONOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USE SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE POWER SUPPLY Connect the supplied adapter to the back of the Docking Station in the slot marked DC 9 5V IN Plug the two prong end of the power cord to an AC100 240V outlet If you have difficulty inserting the plug turn it over and reinsert it if the unit will not be used for a long time disconnect the plug from the outlet NOTE Before plugging the power cord into an AC outlet make sure that all the connections have been made CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that c
4. PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION The LCD may be off or not Turn on the LCD and choose be in correct video mode the correct video mode The system connection ma There is no picture y l y Connect the system be not correct correctly The unit may not be in DVD Switch the DVD AV IN mode switch to DVD Poor AV performance The disc may be dirty or Clean or change the disc warped Other possibilities Static or other external interference may cause the player function abnormally In order to recover normal status unplug the power supply cord and then plug it into the outlet again to reset the player If the problems still exist consult your service center or qualified technician 43 Specifications Laser Wavelength Frequency Response Audio Signal to noise Rate Audio distortion noise Channel Separation Dynamic Range 80dB 1kHz Audio Out Analog Audio Out Out Level 1 5V 19 Load 10KO Video Out Video Out Out Level 1Vp p 0 1 Load 750 Unbalanced Negative AC 100 240V 50 60Hz 195mmX149mmX38 5mm L W D About 1 2 kg Compliance with FCC FDA cUL listed E209155 DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Power Consumption Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Confidential unpublished works 1992 1997 Dolby Laboratories All rights reserved 44 For service support an
5. dech Step 2 Load a new battery properly with the side up a CH GG Step3 Insert the battery holder back into a the remote control _ Battery Property Battery Type CR2025 3V Battery Life Approximately 1 year under normal use at room temperature Caution 1 Improper use of the battery may cause overheating explosion or ignition which can result in an injury or fire Battery leakage may damage the remote control Do not expose the remote control unit to direct sunlight Do not recharge disassemble deform or heat the battery Do not put the battery in fire or water Immediately replace the exhausted battery eee 17 System Connections e Always ensure that the DVD player TV and any other electrical equipment to be connected with are switched off and unplugged from the power supply e Ensure that you observe the color coding when connecting audio and video cables Connecting to TV Audio Video connections Follow the drawings below to connect the DVD player to a TV s Audio Video inputs with Audio Video cables Connecting to Amplifier Refer to your Audio equipment s manual before connection Follow the drawings below to connect the DVD player to an AV amplifier d IQ OAO AMPLE ECR L ALO IH Wao IN BI O r 18 System Connections Connecting to External AV Source The player supports an AV signal input function Use the audio video cable to connect the unit to an exter
6. use caution when moving the cart apparatus combination to avoid injury from tip over HAL 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus FCC Notice Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency nergy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no gruarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures
7. AUDIO button SUBT button gt gt 9 REP button gt Press INFO button for detailed information about the disc during disc playback Press it repeatedly to display as follows Title Elapsed Title Remain Chapter Elapsed Chapter Remain Display Off DVD discs can contain up to 8 audio bit streams For example English Spanish French etc To select the audio bit stream you prefer press AUDIO button during playback The DVD player will play the next bit stream every time you press AUDIO button in succession if they exist When a DVD disc is playing press SUBT button to select a subtitle language or to turn the subtitle off A DVD disc can be recorded with up to 32 subtitles Press SUBT button repeatedly the mode of subtitles will cycle as follows SUBTITLE 1 N Subtitle 1 appears on the screen SUBTITLE 2 N Subtitle 2 appears on the screen SUBTITLE N Subtitle appears on the screen SUBTITLE OFF No subtitle N refers to the total number of subtitles that the current disc contains NOTE This function is only available for DVD discs recorded with multi subtitles Press REP button to repeat a Chapter Title All or cancel repeat in sequence 28 Playback Operation DVD Playback continued ANGLE button GOTO button 9 Press ANGLE button to play the disc in multi angle mode Multi angle means that a scene is shot from different angles so that the audience can
8. time track starting time or track During CD playback press it repeatedly to display as follows Disc Go To Track Go To Select Track N N refers to the total track number of the disc Use 0 9 buttons on the remote control to select directly GOTO button gt Press INFO button repeatedly for detailed information about the disc during playback Single Elapsed Single Remain Total Elapsed Track DM Time gt Track N Time Track IM Tire INFO button gt Total Remain Display ON 2 rech AN Time Note refers to the playing track number N refers to the total track numbers of the disc Press AUDIO button repeatedly to select desired _ sound effect AUDIO button gt Mono Left Mono Righi Mix Mono Stereo 31 Playback Operation Picture CD Playback Pre operation 1 Load a Picture CD in the disc tray The player will search for the disc automatically 2 The screen displays the root folder with several subdirectories subfolders Use buttons to select a desired folder Then press gt ENTER PLAY or Pl button on the remote control or front panel to confirm your selection 3 The screen enters the selected subfolder to view the files Use buttons to select the desired file Then press ENTER PLAY or Pl button on the remote control or front panel to confirm your selection 4 Press 4 button to return to last folder or directory or move the yellow bar to 9 then pr
9. with the Auto Memory See page19 Make sure the video type of the AV signal source is NTSC Make sure system connection is correct Make sure there are no obstructions between the remote control and the player Make sure the remote control is pointing at the Docking Station s remote receiver Make sure battery is inserted correctly Replace weak battery ee Specifications This unit is compatible with all PDM series players with Docking Jack TV Type NTSC Weight About 0 75 kg DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE For service support and warranty information visit www polaroidelectronics com or in the US call 1 866 289 5168 in Canada call 1 866 301 7922 and in Mexico call 01 800 400 2443 Polaroid is a registered trademark of Polaroid Corporation of Waltham MA USA and licensed for use on the ADS 1000 to Petters Consumer Brands LLC e
10. TV program in TV mode 2 AUDIO OUT jack Output the audio signal to external equipment such as amplifiers etc 3 VIDEO OUT jack Output the video signal to external equipment such as monitors etc 4 AUDIO IN jack Connected to external audio signal source 5 VIDEO input jack Connected to external video signal source 6 DC 9 5V input jack Connected to the AC adapter 7 Main Power Switch Side Panel Drawing UU Release buttons Slide these buttons to release the portable Ke DVD player from the Docking Station See page 13 Display Panel Display Panel Drawing lm mt mt D D D TERE DO 1 AM time indicator 2 PM time indicator 3 Hour or character indicators 4 Minute or character indicators 5 Character indicators Remote Control Preparation Refer to the drawing and remove the empty battery receptacle pi Insert the battery into the receptacle Make sure the polarity matches the marks inside the component ST Insert the receptacle into the remote control Using Of Remote Control Point the remote control towards the main unit when operating The remote control works best at a distance less than 7m and at an angle of up to 60 to the front of the unit No obstacles may stand in the way between remote control and infrared sensor mm m ooo 30 20 CECENE Sc gt COOL ow mam SS ex vi Lo L The batteries
11. between 0 and 20 Use the WV A buttons to select the Language press the gt lt buttons to select English French or Spanish To restore a setting to the original value use the V A buttons to select Reset then press the ENT button to confirm the change Press the lt button on the remote control to exit the setup menu Press the P button on the remote control to enter TV Setup menu TV System Setup When the gt button is pressed the TV system setup menu will appear TV SETUP SIGNAL CATV CHANNEL 002 SKIP ON BLUE SCREEN OFF FINE TUNING AUTO MEMORY a PICTURE EXIT gt Dh TV Function Use the A buttons to select the item you want to set Use the gt lt buttons to select the item and enter it Press the P button on the remote control to exit the setup menu Press the lt button on the remote control to return to the picture setup menu Signal Use the P direction button to select CATV TV signal input mode Use the lt direction button to select ANT TV signal input mode Channel Use the gt lt buttons to change the channel In CATV input mode you can select channels from 2 to 125 in ANT input mode you can select channels from 2 to 69 Blue Screen This function is only available in no signal input mode Use the P button to turn the function ON use the lt button to turn the function OFF Skip When the gt button is pressed to turn the function ON it will skip the current channel Press V A t
12. going to be used for long periods of time the battery pack should first be fully charged and then detached When the DVD Player is turned OFF the DVD Player is still consuming some power in STANDBY mode This will eventually discharge the battery Make sure the power is turned OFF and the AC or car adapter is disconnected before detaching the Battery Pack To detach the Battery Pack 1 Push the battery pack latch toward the rear of the player and slide the rechargeable battery from the main unit See drawings below 2 Store the rechargeable battery in a safe place 23 Notes on Discs Compatible Disc Formats PLAYBACK TIME 133 min SS fee min 88 85 12cm 266 min 266 min DS SL Se DVD m 484 min Be a ADS DIE ee be EE Ge 82min DS SL 150 min DS DL min 150 min DS DL DL ACT His C nm nm Operation methods of some DVD discs are specified by the software manufacturer Please follow the instructions for the disc Care of Discs Handling Discs When loading or removing discs do not touch their playing surfaces AKG Hold the disk as shown at the right L t Cleaning Fingerprints or stains on the disc may affect the quality of sound and picture To clean your discs wipe the surface with a soft clean cloth If necessary moisten a soft cloth with diluted mild detergent to remove heavy dirt or fingerprints a Do not wipe in a circular direction as shown on the right concentri
13. liga al E Te SUIE playback Playbac ree page press During playback press the STOP button once m E button once to stop to stop playback Then r pla back Then press press PLAY button the I button the player will STOP m button player will resume resume playback from playback from the the stopped point Press stopped point Press E button twice to stop this button twice to stop playback completely playback completely Press gt gt button to play fast forward Press it repeatedly and fast forward playback will start at the speed of 2X 4X 8X 16X 32X and normal in sequence Press button to fast reverse Press it repeatedly and fast reverse playback will start at the speed of 2X 4X 8X 16X 32X and normal in sequence Press PLAY button on the remote control to return to normal playback amp 4 buttons gt 3 de 3 Press REP button repeatedly to repeat a Track All REP button gt or cancel the repeat Press A B button once to set the starting point A d JO press it again to set the end point B Then the A B button ey player will play the segment between A and B ay continuously Press this button a third time to stop the A B repeat 30 Playback Operation CD Playback continued gt R Press M4 button to play the previous chapter M4 amp ibuttons Press button to play the next chapter Press GOTO button to select desired disc starting
14. watch from any angle like the drawings below II II A If there are multiple angles in a scene you can use the ANGLE button to select the angle you like to view Press the ANGLE button repeatedly to view from different angle NOTE This function is only available for the DVD discs coded with multi angle material _ Press GOTO button to select desired disc starting __ time track or title uN Title Elapsed 0 24 10 Press av buttons to move the yellow bar to the item you prefer then press ENTER button on the front panel or PLAY button to confirm The corresponding item is highlighted for Title Chapter Angle Tt Time lt Total Time gt Ch Time lt Chapter Time gt use 0 9 buttons to select number values directly The sub menu of the selected item is displayed for Audio Subtitle Repeat Time Disp lt Time Display gt usea buttons to move the yellow bar to the item you prefer then press ENTER button on the front panel or PLAY button to confirm Press GOTO button again to resume normal play Playback Operation CD Playback When a CD disc is loaded the player will play it automatically by the default sequence of the disc You can use M4 Wor number buttons to select a certain track to play Pause gt Durin ng playback press During playback press PAU button to pause Wi button once to pause _ the playback hien oes the playback then press PLAY button to resume p
15. 9 Portable DVD Player PDM O990DS 20050215 Polaroid Safety Instructions Warning This indicates that There is a risk of injury or death Caution This indicates that There is a risk of injury or physical damage Before operation Warning Read and keep the operation manual Before using the the product please carefully read this manual and follow all safety and operation instructions Keep this manual for future reference Power supply The power supply must correspond to the standard indicated on the product If you are not sure of the power supply please refer to the supplier or the local power company Ventilation Do not place this unit on a bed sofa cloth or similar Make sure there is adequate ventilation around the unit before operation Prevent objects and liquid from contacting the player In order to avoid the risk of electric shock and fire caused by short circuits do not insert objects into the player and do not spill liquids on the player Do not place objects such as vases filled with liquids on the apparatus Do not use the product where it will get wet This could cause the product to ignite or cause electrical shock or other malfunction Do not disassemble repair or modify the product Do not cut the power cord to connect it to the power supply for another device This could cause fire electrical shock or other malfunction Always use only the accessories provided with the prod
16. TURE setup menu and screen will display as shown PICTURE BRIGHTNESS 10 CONTRAST 10 COLOR 10 LANGUAGE ENGLISH RESET lt Exit Use the A buttons to select the item you want to set Brightness Contrast Color Use the gt lt buttons to adjust the items between 0 and 20 Use the WV A buttons to select the Language press the gt lt buttons to select English French or Spanish Select Reset to return to the factory default settings Press the lt button on the remote control to exit the setup menu Note Under AV mode if there is no signal the LCD screen will be turned off automatically When connected to an AV signal source make sure the type of the selected AV signal source is NTSC GET Troubleshooting The attached portable DVD player does not work There is no TV function There is no picture or picture is unsteady The remote control does not work Make sure the Docking Station power is on Make sure the portable DVD player is properly connected with the Docking Station If not attach the DVD player again See page13 Make sure the SOURCE mode has been switched to the DVD mode Make sure the SOURCE mode has been switched to the TV mode Make sure the portable DVD player is properly connected with the Docking Station If not attach the DVD player again See page 13 Make sure the TV cable is firmly connected with the Docking Station Make sure the TV channels have been programmed
17. aution Unplug the product when not used for a long period of time Copyright Protection This product incorporates copyright protection technology that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited High quality audio and video Excellent sound Dolby Digital delivers great sound Advanced Playing Functions Compatibility Compatible with DVD CD and Picture CD disks Particular Performance Multi speed fast forward fast backward and slow forward slow backward Last Memory Playback Memorizes the stopped playback track and continues playing the disk from this spot when power is restored if the disc tray cover is not opened Other Special Functions Features AV In External Audio Video input can be connected to most external AV sources AV Out Analog Audio output and video output On screen Display You can choose from English Spanish French German or Italian for the On screen Display language Search by Time Search for a certain track of a disk by selected time Special Functions Supports screen aspect ratio changing zooming in or out multi language caption multi angle viewing High Resolution format achieves mor
18. aver Last Memory Tv Display Angle Mark Osd Lang Captions Last Memory 2 Angle Mark This item is used to turn the Angle Mark on or off Press the a or e button to highlight this item Press the ENT or to enter the item Press the a or w button to choose angle mark on or off Press the ENT button to confirm your selection Press the 4 direction to exit this item 3 0SD Language This item is used to set the OSD on screen display language Press the or w button to highlight this item Press the ENT or to enter the setup of this item It includes English French Spanish German and Italian English by Default Press the or button to choose the proper one Press the ENT button to confirm your selection Press the 4 direction button to exit this item 4 Captions This item is used to turn the captions on or off during playing Press the a or w button to highlight this item Press the ENT or to enter the setup of this item The default setting of this item is off Press the or button to choose on or off Press the ENT button to confirm your selection Press the 4 direction button to exit this item 5 Screen Saver This item is used to turn the screen saver on or off Press the a or e button to highlight this item Press the ENT or gt to enter the setup of this item The default setting of this item is on Press the or e button to choose on or off Press the ENT button to confirm yo
19. c scratches on the playing surface can cause noise Gently wipe from the center of the disc to the outer edge as the lower figure E S 24 Playback Operation READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING YOUR DVD PLAYER FOR THE FIRST TIME WARNING Do not play poor quality discs to avoid damaging the lens Pre operation 1 4 5 6 Connect the unit to power supply through the provided AC adapter Switch POWER ON OFF to ON on the left panel to turn on the DVD player The main unit power indicator lights green and screen displays the Polarojd logo Press the OPEN button on the unit to open the disc tray cover put a disc in the disc tray with printed side facing up Close the disc cover See below ee Li J we p NW TER The player will search the disc and play it automatically Adjust the volume with the VOLUME control on the right panel to the desired level To turn the player off switch the POWER ON OFF on the left panel to OFF Basic Operation MODE button gt Press the MODE button to enter the brightness contrast or color adjustment mode Adjust these levels with and buttons Press the MODE button and hold it for 1 2 seconds to change the aspect ratio between 16 9 and 4 3 See the below for details Normal WIDE 16 9 Normal LB 4 3 Normal WIDE 16 9 25 Playback Operation DVD Playback j 4 Press PAUSE button pm Press Pil button t
20. d warranty information visit www polaroidelectronics com or in the US call 1 866 289 5168 in Canada call 1 866 301 7922 and in Mexico call 01 800 400 2443 Polaroid is a registered trademark of Polaroid Corporation of Waltham MA USA and licensed for use on the PDM 0990DS to Petters Consumer Brands LLC 45 Portable DVD Player Docking otation ADS 1000 Operation Manual 20050324 Polaroid Table of Contents Important Safety Instruction 3 FCC Notice 5 Characteristic Features 6 Front View T Rear Panel amp Side Panel 8 Display Panel 9 Remote Control 10 Attaching amp Detaching Portable DVD player 13 System Connections 14 TV Function 17 AV Function 21 Troubleshooting 22 Specifications 23
21. e completed Danger of explosion if battery is incorrectly replaced Replace the rechargeable lithium battery only with the same or equivalent type Caution Install the product securely so that it will not shift out of place or fall Loose screws or insecure installation may cause the product to shift out of position or fall while a vehicle is moving resulting in an accident and or injury Region code information DVD players and discs are coded by region If the region number described on the DVD disc does not correspond to the region number of this product this product cannot play the disc The region code of this unit is 1 Safety Instructions This product has been listed as class 1 laser product The mark is on the rear panel The apparatus shall be connected to an AC power outlet with a protective grounded connection Visible laser radiation when open and interlock failed or defeated Avoid direct exposure to beam Do not open the top cover while the unit is operating There are no user serviceable parts inside the unit Leave all servicing to qualified service personnel Beware of unit falling or tipping over when moving When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Before operation Warning Unplug the apparatus during lightning storms Never operate the product during lightning storms as this could cause the product to malfunction Do not operate t
22. e item as idee The available languages are English French Datault kuan Spanish Chinese Japanese Korean Russian and Russian Thai English by default Wa Press the a or e button to choose the preferred Language Preferred Audio Language Press the ENT button to confirm your selection Press the 4 button to exit this item 39 System Setup Preference page continued 2 Subtitle This item is used to set the subtitle language ege wn tea sa Press the a orv button to highlight this item len Manes Eng Chinese Press the ENT or gt button to enter the item iz Japanesa The available languages are English French Korean Spanish Chinese Japanese Korean Russian and SC Sr Thai English by default mn Press the a or e button to choose the preferred Language Preferred Subtitle Language 3 Press the ENT button to confirm your selection Press the direction button to exit this item 3 Disc Menu Auda En This item is used to set the language of disc menu Subtitle Si e Press the a or button to highlight this item Dise Men RS Spanish Press the ENT or gt button to enter the item a pipi The available languages are English French Default Korean Spanish Chinese Japanese Korean Russian and seal Thai English by default Press the or button to choose the preferred Language Preferred Menu Language Press the ENT button to confirm your selection Press the 4 direction button to exit this i
23. e than 500 lines of horizontal resolution MPEG 2 decoding Power Adapter Switch Automatically adapts to voltage requirements in U S and other countries Revolving LCD Screen Adjust the screen by revolving it horizontally about its axis or lay it flat with the screen facing Docking Jack This unit features a docking jack on the bottom for connecting with an optional docking station The docking station is integrated with connectors for peripheral devices to eliminate complicated connections and save valuable space around the player Accessories Accessories List Remote Control with battery Operation Manual Power Supply Cord with AC Adapter Audio Video Cable Rechargeable Battery Pack DC Adapter Car Adapter Headphones NOTE Accessories and their parts numbers are subject to change without prior notice DVD Playback CD Playback Picture CD Playback Contents View of Unit Front View LJ Ge EI a et i i 0060 SS 60086 mmm me CR T kD 2 Speakers 3 Ain button Y button v direction button and button for search disc backward a direction button and button for search disc forward 4 lt button ki button d M4 direction button and button for play the previous track gt direction button and button for play the next track 5 ENT button Press to access playback or confirm your selection 6 m Stop button Press to stop playback Then pr
24. e unit is in it will automatically start the playback of the desired signal source Select ON to activate the function select OFF to disable the function 19 TV Function Power on To set the playback start time of the signal source use number buttons to input the desired start time in sequence of hour minute Press the gt lt direction buttons to shift between am and pm Power off To set the playback end time of the signal source use number buttons to input the desired time in sequence of hour minute Press the gt lt direction buttons to shift between am and pm When the playback of the signal source is over the player will enter standby mode Signal Use the ag direction buttons to select CATV ANT Channel Use number buttons to input the desired TV channels In CATV signal input mode there are 124 channels to choose from 2 125 in ANT signal input mode there are 68 channels to choose from 2 69 Note The function is active as long as the unit is continuously supplied with power The unit will automatically play the selected input signal at the set start time and enter standby mode at the set end time each day sje AV Function AV Function The docking station has an additional AV input and output When an AV source is connected press the AV1 or AV2 button on the remote control to enter external AV mode Picture Parameter Setup Press the MENU button once on remote control to enter PIC
25. e unit or view video software while driving a vehicle Place the unit in a proper position for viewing Detach the battery pack when using the AC or car adapter as the power source Disconnect the player from the Car Adapter when starting the vehicle VV VV 20 Rechargeable Battery About Rechargeable Battery Pack Your portable DVD player comes with a lithium ion rechargeable battery that attaches to the rear of the DVD player Charge the battery fully before initial use Charging time is normally about 5 hours A fully charged battery delivers about 3 hours of use but playing time varies from disc to disc If the battery will not be used for a long period of time fully charge the battery prior to storage Working conditions and precautions for the rechargeable battery gt New batteries should be fully charged before initial use gt Battery should only be used and charged when temperatures are between 32 100F gt Never put the battery in fire or water gt Do not expose the battery to high temperatures or store in hot sunny places gt Maintain well ventilated conditions around the product to avoid overheating Don t put the product on a bed sofa or anything that may block ventilation to the product gt Do not short the battery terminals gt Do not open the battery gt Detach the battery after charging is complete When charging the battery pack the charge light will turn red when the charging is comp
26. eration 3 Power Indicator 4 SOURCE button Press to shift among DVD TV AV1 and AV2 mode 5 Menu Press to adjust the Picture standard including Brightness Contrast Color Language or Reset all items 6 A V direction button Press to select items in the setup menu Press to select channels in TV mode Press to adjust the value when setting the time on the display panel 7 lt gt direction buttons Press to select items in the setup menu and to adjust the volume level Press to adjust the value in the picture setup menu 8 CLOCK button Press once to display the time on the display panel In standby status the time is still displayed on the panel Press it again to set the time on the display panel Use the 4 gt buttons to select the editing position of hour or minute and then use the e buttons to adjust the value of the hour or minute upward and downward 9 SET button Press to enter and exit from the timer setup menu In STANDBY mode press this button to setup the alarm clock 10 POWER button Press to enter or exit the STANDBY mode 11 Spring Tab Used to spring the portable DVD player up when it is removed See page13 12 Fixing hooks Fix the portable DVD player on the Docking Station See page11 13 Docking jack For connection with a portable DVD player Rear Panel amp Side Panel Rear Panel Drawing AHT PALIT 7 SO 1 ANT INPUT jack Connected to external antenna to receive the
27. ess ENTER PLAY or KR button on the remote control or front panel to return to the last folder or directory Note Many discs have other items besides pictures Press STOP button to wy Press m button to preview thumbnail preview thumbnail STOP images of the images of the m button pictures Press PLAY pictures Press button to return to Kl button to return to normal playback normal playback PAUSE l Press PAUSE button to Press Pil button to button pause during playback pause during playback Press PLAY button to Press it again to resume normal playback resume normal playback Press PREV button to go to the previous file Press NEXT button to go to the next file 448 buttons v v U B Press INFO button for detailed information about the INFO button disc during viewing the picture Press it repeatedly the screen will display as follows Single Elapesed Single Remain Display Off 32 Playback Operation Picture CD Playback continued REP button gt MENU button gt GOTO button gt Press REP button to repeat a file folder in sequence Press it repeatedly the display will be as follows Shuffle Random Single Repeat One Repeat AL Repeat Off Shuffle plays files of current folder randomly without obeying the original order S Random plays files of current folder randomly without obeying the
28. ess PLAY button to resume playback from the stopped spot Press this button twice to stop playback completely 7 Power Indicator Lights green when the player is on work turn red when the player is in standby mode 8 gt il PLAY PAUSE button Press once to pause the playback and press it again to resume the playback 9 Charge indicator Lights red when the battery is charged turn green when the charge is over 10 View of Main Unit 10 MENU button Press to display or cancel the menu 11 TITLE button Press to display the title menu if it exists in the disc 12 Setup button Press to enter the player s system setup 13 Remote Control Sensor 14 Unit latch hook 15 ZOOM button Press to realize various zoom effects 16 A B Repeat button Press to play a certain selected segment repeatedly Press to adjust the value of brightness contrast and color 17 SLOW button Press to activate the slow playback function Press to adjust the value of brightness contrast and color 18 Mode button Press to change the menu of brightness contrast and color Keep pressing to change the aspect ratio 19 OPEN Switch Push to open the disc tray cover 11 View of Side Panels Right Side View aaa VOLUME 1 VOLUME Control For adjusting the sound level of speakers or headphones 2 Headphone Jack When headphones are plugged into the unit the speakers automatically turn off 3 AUDIO input output Jack Fo
29. have a photo processing shop make a PICTURE CD in JPEG format The figure on the right displays the root folder folders and files of a typical picture CD 4 Troubleshooting If you suspect there is something wrong with the DVD player immediately turn the power off Disconnect the power connector and check that there is no smoke or excessive heat coming from the unit Never open or try to repair the unit yourself There are no user serviceable parts inside PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION The disc cover may not be Close the disc cover closed There may not be a disc in Put a disc into the DVD drive the DVD drive The disc may not be put in Put the disc in with the label the right id The player cannot eee SCH play The disc may be dirty or Clean or change the disc warped The player s region code Make sure the players may not be the same as the region code is the same as region code of DVD disc the code of DVD disc There may be water on the Remove the disc and shut lens the player off for at least two hours to dry The battery may be dead Charge the battery or use the AC or car adapter The system connection may Connect the system be not correct correctly turned down volume control There is no sound The sound setup of the DVD Setup the sound of the DVD disc may be not correct correctly The disc may be dirty or Clean or change the disc warped 42 Troubleshooting
30. he product if there is visible damage to the product If damage occurs immediately stop using the product and contact the store from which you purchased your product Continuing to use the product in this condition could cause accidents fire or electrical shock The driver of a vehicle must not operate this product or watch the monitor It may distract the driver and cause an accident Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as damage to the power supply cord or plug liquid spilled on the player objects have fallen into the player exposure to rain or moisture the unit does not operate normally or has been dropped Safety Instructions Caution Notes on discs Do not play discs that are damaged or warped including discs with cracks scratches or parts missing discs with burrs poor quality discs Route all cords so that they do not interfere with driving or with entering or exiting the car Run the cords so that they do not wrap around the steering wheel brake pedal etc or around your feet Secure all the cords together Use the product at the proper volume setting Driving while you are unable to hear sounds around you or from outside the car can cause accidents Do not touch the color TFT LCD screen Do not place any heavy objects on the product Never put any heavy objects on the product Doing so may cause damage to product Do no
31. ion A as shown in the left figure at which the screen is vertical to the operation panel 2 Revolving the screen horizontally around it s axis in the clockwise only The maximum revolving degree is 180 position C If you want to return to initial position A please revolve screen counter clockwise 3 You can rotate the screens vertically from position C to operation panel as indicated in left fig 4 The final rotating position position D at which the screen facing upward and back to operation panel Remote Control PWR button Press to access standby mode or playback mode INFO button Press to display the detailed information of the disc during playing Press this button again to exit from the information display TITLE button Press to display title menu if it exists in the disc Direction buttons Press to select different options ENTER button Press to access playback or confirm your selection SETUP button Press to enter the player s system setup 0 9 Number buttons Press to select an option in the menu M4 PREV button Press to return to the previous list or the previous track or chapter If it is a DVD disc it needs to press this button twice to return to the previous track gt NEXT button Press to skip to the next list track or chapter 15 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Remote Control SUBT button Pres
32. lete the light will turn green gt Detach the battery when it is not in use gt When the battery is weak Low Power will appear on the LCD screen and about one minute later the player will power OFF automatically Warning Do not touch any metal objects to the battery connectors as it will put the battery in standby mode To exit the standby mode connect the battery and DVD player to AC or DC power 21 Rechargeable Battery Attaching the Battery Pack Refer to the following steps for attaching the Battery Pack 1 Make sure the player is off and the AC or car adapter is disconnected 2 Place the DVD player on a soft and smooth surface with the bottom of the unit facing up 3 With one hand on the DVD player to prevent it from moving take the battery and align the plastic tabs on the battery pack with holes on the player and push the battery pack into the DVD player 4 The battery pack will click into place Charging the Battery Pack The battery pack must be attached to the DVD player to charge it using the supplied AC or car power adapter 1 Attach the battery pack to the DVD player as shown above 2 Plug the supplied AC Power Adapter into the player s power jack marked DC 9 5V IN located on right side of the DVD Player 3 Plug the other end of the AC Power Adapter Cord into a household AC Outlet as shown below 22 Rechargeable Battery Detaching the Battery Pack If the DVD Player is not
33. nal AV signal source such as a DVD VCR etc After connecting switch the DVD AV IN to AV IN NOTE Noise may occur in speakers when there is an external audio signal input while playing a DVD disc Unplug the audio cord to clear the noise ai FP D are ji a wi E Oo a on y HU j DD H AY FA ASO OUT s n GUT AV SIGNAL SOURCE Connecting to Headphones Connect headphones to the headphone jack on the right side of the unit When headphone is connected the speakers will automatically turn off 19 Power Supply Preparation Using the AC Adapter The player is supplied with an AC adapter for powering the unit and charging the battery Connect AC adapter to the right side of the DVD player in the jack marked C a A fl eee DC 9 5V IN as shown on the right o Plug the two prong end of the power H cord into a grounded electrical outlet The power indicator lights red ACTOO 2404 Note Turn player s power off before unplugging Note In the case of using the adapter the LCD screen will be brighter than with the rechargeable battery Using the Car Adapter The player is supplied with a Car Adapter for powering the unit and charging the battery while in a vehicle Connect the Car Adapter Power Plug to the unit s power jack and plug the other i end to the vehicles 12V accessory cigarette socket as shown on the right figure cigarette lighter socket Attention Do not operate th
34. normally last for about six months This depends on how often and for what operations the remote control is used If the remote control unit fails to work even when it is operated near the player replace the battery If the remote control is not used for a long period of time remove the battery from the compartment to prevent damage by leakage 10 Remote Control R emote Control Drawin DIO OO AON ES 16 9 4 3 POWER E JN e YD DND E Sa AVI peal a e SS lt aia AV2 a nL CHDisP au K a e SOVQ C Remote Control 10 11 12 13 14 POWER button Press to access to or exit the STANDBY mode TV button Press to enter TV mode DVD button Press to enter DVD mode AV1 button Press to shift to external AV1 input mode AV2 button Press to shift to external AV2 input mode d ka Press to select menu items or settings Press 4 buttons to adjust volume Or press to adjust value in the picture setup menu Press w buttons to select channels forward and backward in TV mode Or press to adjust the value of time when setting time on the display panel ENT button Press to confirm selections MENU button Press to access the menu of current mode 16 9 4 3 button Press to shift the aspect ratio between 16 9 and 4 3 0 9 number buttons Select numbers by pressing these buttons One digit number press the number button and press the ENT button
35. o Pause to pause during playback pause during play then press PLAY button to 2 then press it again to resume normal playback resume normal play F During E press During playback STOP button once to stop ra press m button once playing then press PLA to stop playing then Press ENTER button to Press ENT button start playing or 4 gt a v Direction buttons or 0 9 buttons to select a Title and Chapter directly Ss 7 to start playing button to resume normal press WM button to playback from the stopped resume normal point Press STOP button playback from the Stop i twice PAEA to SE stopped point Press playback completely Then it twice repeatedly when you press PLAY to stop playback button the player will play completely Then from the beginning when you press Pl button the player will play from the beginning Press ZOOM button repeatedly to shift among 2X Zoom button 3X 4X 1 2 1 3 1 4 zooming effect and normal Tm playback CS Press A B button once to set the starting point A A B Button gt press it again to set the end point B Then the m Player will play the segment between A and B gt continuously Press this button a third time to stop the A B repeat 26 Playback Operation DVD Playback continued Press TITLE button during play The title menu will appear on the screen TITLE button Press 4 gt direc
36. o select channels When the lt button is used to turn the function OFF it will play the channels in sequence when selecting under normal playback status Fine Tuning Use the V A buttons to select Fine Tuning and then press the gt lt buttons to tune forward or backward from the current channel _ 18 TV Function Auto Memory Use the W A buttons to select Auto Memory press the ENT button to enter auto memory mode SEARCHING CH 009 EXIT lt E The auto memory will take a few minutes The unit will search channels from the lowest channel to the highest channel in the standard channel list When tuning operations are complete the unit will exit and store the channels by sequence in the memory During tuning press the lt button to exit the auto memory Use the V A direction buttons to select the desired channel from those in memory Timer Setup Press the SET button on the remote control to enter Timer setup menu the screen will display as below TIMER SET TIMER OFF POWER ON __ am POWER OFF __ am SIGNAL CATV CHANNEL 002 Exit SET Use the VY A buttons to select the item you want to set Use the gt lt buttons to enter the item and to select Press the SET button again on the remote control to exit the setup menu Timer Use the gt lt direction buttons to select ON or OFF This function allows you to set the start time and end time of the desired signal source No matter what mode th
37. ontained in the operating instructions unless you are qualified to do so Refer to service manual for servicing instructions E Important Safety Instructions Note 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Maintain well ventilated conditions around the product Do not put product on bed sofa or anything that blocks ventilation Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat regenerators stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used
38. or wait 2 seconds to confirm Two digit number press the first number and input the second number in 2 seconds Three digit number press the first number then input the second number in 2 seconds and input the third number in the next 2 seconds CH DISP In TV mode display the current channel information CLOCK button Press once to display the time on the display panel In standby status the time is still displayed on the display panel Press twice to set the time on the display panel Use the 4 buttons to select the editing position of hour or minute use the buttons to adjust the value of the hour or minute upward and downward LAST button Press to back the last channel that you watch in TV mode SET button Press to enter and exit from the timer setup menu In STANDBY mode press this button to setup the alarm clock LAs Attaching amp Detaching Portable DVD player Note Do not connect the power cord until all other connections have been made Attaching Portable DVD player to Docking Station Follow the steps below to attach the portable DVD player to the Docking Station It is advised to attach the rechargeable battery to the portable DVD player before this connection Step1 Center the player on the Docking Station and line up the 4 slots on the bottom of the player with the 4 fixing hooks on the Docking Station Step2 Press the portable DVD player down gently with two hands and the fixing hooks will fix the por
39. original order After playing the whole folder play will be stopped automatically Single plays only the current file As soon as it comes to an end play will be stopped Repeat One repeats the current file Repeat All repeats all files of the current folder according to their original order Repeat Off cancels the repeat This function is only available under normal play mode it doesn t work under repeat status Press MENU button during playback to return to root Ps folder Se s Press GOTO button to select the desired folder or file Press 0 9 buttons to select your favorite folder or file directly 33 Playback Operation Picture CD Playback continued Picture Rotate While viewing a picture use direction buttons a lt 4 to rotate the picture m Press gt button to rotate the current picture clockwise EJ Ii Br ll DI II GI Hormel Press 4 button to rotate the current picture anti clockwise D I i Loy II ra nu Pef mo Press button to rotate the current picture flip horizontal Normal II Press button to rotate the current picture flip vertical ER II KE Normal 34 System Setup You can change the default settings of this unit to customize its performance to your own preferences Note Set the system up while play is stopped or there is no disk in the player To set up your system Press the SETUP button on the front panel The setup men
40. r connecting to an external amplifier or audio source 4 VIDEO input output Jack For connecting to an external monitor or video source 5 DVD AV IN Switch Switch to AV IN to input the external AV source switch to DVD to playback the disc 6 DC 9 5V IN Jack For connecting to power supply including Car Adapter See page15 Left Side View 1 Headphone Jack When headphones are plugged into the unit the speakers automatically turn off 2 POWER ON OFF Switch Switch the power on or off 12 View of Unit Bottom View of the bottom 1 Docking Jack This portable DVD player is designed with a Docking Jack on the bottom The Docking Jack is designed for connecting to an optional external Docking Station for expanded functions The Docking Station features an electrical connection interface that enables the portable DVD to effectively serve as a desktop DVD It is integrated with connectors for peripheral devices to eliminate complicated connections and save valuable space around the unit With a Docking Station you can enjoy the expansion possibilities of desktop DVD with the portability of a portable DVD 2 Rechargeable Battery Contacts For connecting the rechargeable battery pack 13 Revolving LCD Screen Revolving Steps The revolving LCD screen is one of the outstanding features about this product Wed like to suggest you to take the following steps 14 for proper operation 1 Open the screen cover to posit
41. r of the Docking Station press the SOURCE button on the front panel or the TV button on the remote control to switch to TV mode DER System Connections Connecting To the Power Adapter This unit is powered via the switching power adapter supplied vc TN AC100 240V 1 Connect the AC adapter to jack marked with DC 9 5V IN on the rear panel of the unit Plug the two prong end of the power cord to the grounded electrical socket When not using the unit turn off the power of the unit first and then unplug the power supply to prevent malfunctions 16 TV Function Basic Operation Connect the antenna to the antenna jack on the rear panel After connecting the antenna connect the power supply cord If the player is in standby mode press the POWER button on the front panel to turn on the power Press the TV button on the remote control to shift to TV mode Press the a buttons on the remote control to select the desired channel or press the number buttons to select your desired channel See page 12 Some preferences can be preset Picture Parameter Setup Press the MENU button once on the remote control to enter PICTURE setup menu and screen display as shown PICTURE BRIGHTNESS 10 CONTRAST 10 COLOR 10 LANGUAGE ENGLISH RESET lt EXIT TV SETUP gt Use the V A buttons to select the item you want to set Brightness Contrast Color Use the gt lt buttons to adjust you can adjust the items
42. s to select different subtitle languages if there are multiple subtitle languages existing in the disc ANGLE button Press to access various camera angles playback if the DVD disc contains multiple camera angles A B Repeat button Press to play a certain selected segment repeatedly ZOOM button Press to realize various zoom effects REP button Press to repeat a chapter a title a track or the whole disc MENU button Press to display or cancel the menu PAUSE button Press to pause the playback STOP button Press to stop the playback Then press PLAY button to resume playback from the stopped spot Press this button twice to stop playback completely PLAY button Press to begin to play GOTO button Press to select the desired disc starting time track or title 10 button Press this button and the additional number buttons to select item numbers which are greater than 9 FWD SCAN button Press to search forward fast REV SCAN button Press to search backward fast SLOW button Press to activate slow playback function AUDIO button Press to select different languages when a DVD disc which contains multiple audio languages is played Press to select different audio track when a CD disc is played 16 Battery Installation for Remote Control Installation Steps Follow the steps below to install the battery Step1 Pull the battery holder out from the remote control in the direction of the arrow
43. t damage the cords Broken wires and short circuits can cause electrical shock or fire Run the cords so that they do not get tangled in moving parts Do not damage tighten up twist or work on the cords Do not place the cords near heat sources or put heavy objects on the cords Do not play discs in the wrong format For instance if you add the cda extension to a file that is not formatted as a CD file a loud noise may be heard through the speakers possibly damaging them and hurting your eardrums Do not swing from the product or pull it This may cause an accident injury and or malfunction Be particularly careful that children follow this rule IMPORTANT FOR LASER PRODUCTS 1 CLASS 1 LASER PRODUCT 2 DANGER Visible laser radiation when open and interlock failed or defeated Avoid direct exposure to beam 3 CAUTION Do not open the top cover There are no user service able parts inside the unit Leave all servicing to qualified service personnel This unit complies with FDA regulation for radiation control of laser products Safety Instructions Preservation and Cleaning Warning Do not use any volatile agents such as gasoline or paint thinners to clean the product Never use any volatile materials to clean the product because they may damage the surface of the player Use a soft dry cloth for cleaning Store in a proper place Store the product in clean dry place avoid direct sunlight and moisture C
44. table DVD player on the Docking station from moving De A l ia we i Lp Ml i hm Sooo Detaching Portable DVD player from Docking Station Step1 Slide the two release buttons toward the front of the Docking Station to unlock the fixing hooks The five spring tabs will spring the portable DVD player up Step2 Remove the portable DVD player from Docking Station ee System Connections e Do not connect the power cord until all other connections have been made e Ensure that you observe the color cord when connecting audio and video cables Expand the Connections The following drawing shows a sample of expanding the connections of a portable DVD player with Docking Station s i LE Ee E SD AUDIO IN VIDEO IN 4 After connecting with external AV source by AV jacks please turn on the power of the unit and press the SOURCE button on the front panel to shift to AV1 mode or press the AV1 button on the remote control to shift the mode directly If the AV source from docking station please press the SOURCE button on the front panel to shift to AV2 mode or press the AV2 button on the remote control to shift the mode directly 14 System Connections Connecting To TV Signal Input Source The unit can be connected to a TV antenna to receive TV programs Connections should be made as follows Cable TV Signal Input After connecting the antenna turn on the powe
45. tem Audio Eng 4 Default Subtitle ott This item is used to reset the unit Disc Menu Eng Press the a or w button to highlight this item Press the ENT or gt button to enter this item Detault Press the ENT button to reset Then all the settings of your unit will return to the original status 40 Definitions Dolby Digital Dolby Digital is a technology developed by Dolby Laboratories Audio tracks encoded in Dolby Digital can reproduce from one to 5 1 discrete channels of excellent quality audio Letterbox screen This refers to a screen on which the playback picture of wide screen DVDs appears with black bands running along the top and bottom Pan amp Scan screen This refers to a screen on which the playback picture of wide screen DVDs is cut off at the left and right sides Title Chapter DVD DVDs are divided into some large sections titles or some small sections chapters Each section is numbered these numbers are called Title number or Chapter number Title 1 Title 2 Chapter 1 Chapter 1 Chapter 2 Chapter 2 Track CD CDs are divided into some sections tracks Each section is numbered these numbers are called Track numbers Track 1 Track 2 Trackk3 nee JPEG JPEG is a common picture format that has small file size and low quality loss rate of picture Hundreds of pictures can be stored on a disc in this format To create a digital photo album from film pictures
46. the sharpness of the Screen Press the or e button to highlight this item Press the ENT or gt to enter the item It included High Medium and Low Low by default Press a orv button to choose the proper one Press ENT button to confirm your selection Press 4 direction button to exit this item 38 System Setup Video Setup Page continued 2 Brightness This item is used to adjust brightness level of the Screen Brightness ININ 0 Press the a or e button to highlight this item Press the ENT or gt to enter the item Press the orv button to adjust to desired level The default level is 00 Press the ENT button to confirm your selection Brightness 3 Contrast This item is used to adjust contrast level of the Screen Contrast II 0 Press the a or e button to highlight this item Press the ENT or gt to enter the item Press the or button to adjust to desired level The default level is 00 Press the ENT button to confirm your selection Contrast Preference page Audia Eng ase a The items included in this sub menu are Se ng Shown as the left Datault Note This sub title can only appear in the state that no disc is in the DVD drive Go to Preference Page Freterence roge 1 Audio REN eni SE ma This item is used to set the audio output language Subtitle op Franch Press a orv button to highlight this item Disc Menu Eng Spanish Press the ENT or gt button to enter th
47. tion buttons to select the title or disc menu item you wish to play then press a ENTER button to confirm your selection Or press m 0 9 buttons to select the item you prefer directly S Press MENU button during play The root menu will appear on the screen MENU button gt Press 4 a direction buttons to select the item wey you wish to play then press ENTER button to confirm your selection Or press 0 9 buttons to select the item you prefer directly 448 buttons Current chapter Press it twice repeatedly to go to the z beginning of the previous chapter Press button to play the next chapter gt H Press M4 button once to go to the beginning of the Press gt gt button to play fast forward Press it repeatedly and fast forward playback will start at H the speed of 2X 4X 8X 16X 32X and normal in gt i sequence Press button to fast reverse Press it repeatedly and fast reverse playback will start at the speed of 2X 4X 8X 16X 32X and normal in sequence Press PLAY button on the remote control to return to normal playback amp 4 buttons J Je 2 Press SLOW button repeatedly and slow playback will start at the speed of 1 2 1 4 1 8 1 16 forward 1 2 1 4 1 8 1 16 backward or normal playback in Le sequence Press PLAY button to resume normal playback SLOW button gt 2 Playback Operation DVD Playback continued INFO button
48. u will appear on the screen It includes General Setup Page Speaker setup page Dolby digital setup Video setup page and Preference page You can exit the setup menu by pressing the SETUP button again at any time Press the 4 or gt direction buttons on the front panel to select a sub menu to set up Press the or button on the front panel to select the item that you want to set up in the sub menu Tv Display Ps Angle Mark On Osd Lang Eng The items included in this sub menu are shown as Captions Off the left Screen Saver On Last Memory Off __Go To General Setup Pag 1 TV Display This item is used to set TV display mode peer eg Marna Press the or x button to highlight this item E Eng Wide Press the ENT or gt button to enter the item Getica ia It includes Normal PS Normal LB and Wide Wide E Pe by default Press the or e button to choose the Last Memory off proper one Press the ENT button to confirm your selection Press the 4 direction button to exit from this item Note Select Normal PS or Normal LB when a 4 3 TV is connected Select Wide when a 16 9 wide screen TV is connected Set Tv Display Mode b ER System Setup General Setup Page continued Tv Display Osd Lang Captions Screen Saver Last Memory Tv Display Angle Mark Osdlang Eng English Captions Off French Screen Saver On Spanish Last Memory Off German Italian Tv Display Angle Mark Osd Lang Screen S
49. uct Only use attachment accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacture or sold with the apparatus Safety Instructions Do not install the product in a position where it will interfere with the operation of an automotive air bag The air bag may fail to operate properly or the product could become dislodged by airbag operation causing an accident and or injury Do not expose the product to excessive heat This could cause the product to start smoking or ignite or cause electrical shock or other malfunction Unplug all the equipment before connecting Always ensure that the DVD player and any other electrical equipment connected to the DVD player is switched off and unplugged from the power supply before the player is connected Do not under any circumstances install the product in a place in a vehicle where the driver s ability to drive the car or the driver s field of vision will be impaired Install the product in a place where it doesn t interfere with the driver s field of vision either in front or behind or in a place where it interferes with the driver s ability to drive the car This may lead to traffic accidents and or injury Follow the instructions to connect the product to other electrical equipments To prevent damage to the unit be sure to follow the connection diagram Do not connect power to the unit until all other connections ar
50. ur selection Press the 4 direction button to exit this item 36 System Setup General Setup Page continued Tv Display Ps Angle Mark On Osd Lang Eng Captions Off Screen Saver On On Last Memory Off SetLast Memory State Speaker Setup Page Speaker setup Page Downmix Go to Speaker Setup page Speaker Setup page Downmix LURI Set Downmix Mode Dolby Digital Setup Dolby Digital Setup Dual Mona Dynamic Go to Dolby Digital Setup 6 Last Memory This item is used to set last memory state Note The last memory refers to resume playback from the point that you stopped last time Press the or w_ button to highlight this item Press the ENT or gt to enter the item The default setting of this item is off Press the or e button to choose on or off Press the ENT button to confirm your selection Press the 4 direction button to exit this item The item included in this sub menu is shown as the left 1 Downmix This item is used to set downmix mode Press the or w button to highlight this item Press the ENT or gt to enter the item It includes Lt Rt and stereo stereo by default Note The function of Lt Rt is to output mixed audio in the format provided by Dolby The function of stereo is to output stereo signal Press the or button to choose the proper one Press the ENT button to confirm your selection Press the direction button to exit this item
Download Pdf Manuals
Related Search