Polar Y8 User's Manual
Contents
1. designed to minimize the possibility of getting caught in something In any case be careful when running with the stride sensor in brushwood for example The stride sensor is water resistant and can be safely worn in the rain Do not immerse the stride sensor in water as it is not intended for underwater activities Do not expose to direct sunlight for extended periods Keep your stride sensor in a cool and dry place Do not keep in a damp environment in non breathable material a plastic bag or a sports bag nor with conductive material a wet towel Technical Specifications Battery life Average 600 hours of use Battery type CR2430 Battery sealing ring O Ring 25 0 x 1 2 material silicone Operating temperature 10 C to 50 C 14 F to 122 F Accuracy 3 or better once calibrated definition applies to stable conditions ENGLISH 7 Limited International Polar Guarantee statutory rights under applicab dealer arising from their sales This limited Polar internationa purchased this product in the imited Polar international guar Polar Electro Oy for consumers his product in other countries Polar Electro Oy Polar Electro original consumer purchaser o product will be free from defec workmanship for two 2 years purchase The receipt of the original pu of purchase The guarantee does not cover t This guarantee does not affect the consumer s e national or state aws in force or the con2. third party product or service its interoperability with a Polar product safety of a third party product or service as well as any other liabilities related to or arising from a hird party product or service Polar Electro Inc Polar Electro Oy shall not be liable for any data transfer fees or any other fees which might be due to or related to he use of this Polar product This product is protected by the incorporeal rights of Polar Electro Oy as defined by the following documents US6584344 Copyright 2013 Polar Electro Oy Fl 90440 KEMPELE All rights reserved No part of this manual may be used or reproduced in any form or by any means without prior written permission of Polar Electro Oy The names and logos marked with a symbol in this user manual or in the package of this product are trademarks of Polar Electro Oy The names and logos marked with a symbol in this user s manual or in the package of this product are registered trademarks of Polar Electro Oy ENGLISH 9 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by Polar Electro Oy is under license Polar Electro Oy is a ISO 9001 2008 certified company CE This product is compliant with Directives 93 42 EEC and 1999 5 EC and 2011 65 EU The relevant Declaration of Conformity is available at www polar com en regulatory_information Regulatory information is available at www pola
3. Battery Before using your stride sensor for the first time insert the battery included in the product package 1 Open the battery cover by turning it counterclockwise to OPEN using a coin picture Al 2 Place the battery inside the cover with the positive side facing the cover picture A2 Make sure the sealing ring is in the groove to ensure water resistance 3 Place the cover with the battery inside it into the sensor 4 Press the cover in place and close it by turning clockwise from OPEN to CLOSE using a coin picture A3 To increase battery life Polar Stride Sensor Bluetooth Smart has three different power modes Measuring Stand By and Deep Sleep mode In Stand By mode the sensor is visible to the receiving device and a connection is possible When connected to the receiving device the sensor goes to Measuring mode When disconnected the sensor returns to Stand By mode If the sensor is not touched during the next couple of minutes it goes to Deep Sleep mode The slightest movement will make the sensor return to Stand By mode ENGLISH 3 Pair a New Stride Sensor with Your Receiving Device Polar Stride Sensor Bluetooth Smart must be paired with the receiving device in order to analyze your running technique and efficiency For more information see the user guidance material of the receiving device or mobile application Attach the Stride Sensor on Shoelaces 1 Undo your shoelaces and place
4. POLAR STRIDE SENSOR 3 Bluetooth Model Y8 User Manual POLAR LISTENS TO YOUR BODY ENGLISH Congratulations Polar Stride Sensor Bluetooth Smart is the best choice for improving your running technique and efficiency Using sensitive inertial sensors it gives accurate and highly responsive speed distance leg cadence and stride length measurements Polar Stride Sensor Bluetooth Smart is compatible with Bluetooth Smart Ready devices that support Bluetooth Running Speed and Cadence Service When using a smartphone a separate application is required to view stride sensor data It is recommended to use the Polar Beat application but it is also possible to use other applications st Polar Beat polarpersonaltrainer com If you have a polarpersonaltrainer com account Polar Beat automatically synchronizes your training files to it Please note that you must sign in to your polarpersonaltrainer com account when starting Polar Beat for the autosync to work The latest version of this user manual can be downloaded at www polar com support For video tutorials see Using Polar Stride Sensor Bluetooth Smart at www polar com en polar_community videos Please follow the pictures on the front and back covers Write the device ID printed on your stride sensor in the space on the front cover picture B The original marking may fade as a result of normal wear and tear 2 ENGLISH Install Stride Sensor
5. ar Service Center only The warranty does not cover damage or consequential damage caused by service not authorized by Polar Electro For contact information and all Polar Service Center addresses visit www polar com support and country specific websites ENGLISH 5 Changing batteries To change the batteries of the stride sensor yourself follow the given instructions To ensure the maximum lifespan of the battery cover open it only when changing the battery When changing the battery make sure the sealing ring is not damaged in which case you should replace it with a new one You can purchase the sealing ring battery kits at well equipped Polar retailers and authorized Polar Services In the USA and Canada the additional sealing rings are available at authorized Polar Service Centers In the USA the sealing ring battery kits are also available at www shoppolar com Go to www polar com to find your own country s shoppolar online store The battery level of your stride sensor is displayed on the receiving device if it supports Bluetooth Battery Service Keep batteries away from children If swallowed contact a doctor immediately Batteries should be properly disposed of according to local regulations Caution Risk of explosion if battery is replaced by an incorrect type Dispose of batteries according to the instructions 6 ENGLISH Care and Maintenance Your safety is important to us The shape of the stride sensor is
6. e that may cause undesired operation Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation 12 ENGLISH If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help This product emits radio frequency energy but the radiated output power of this device is far below the FCC radio frequency exposure limits This equipment complies with FCC RF radiation exposure limits forth for an uncontrolled environment Nevertheless the device should be used in such a manner that the p
7. f rieur approuv pour l metteur par Industrie Canada Dans le but de r duire les risques de brouillage radio lectrique l intention des autres utilisateurs il faut choisir le ype d antenne et son gain de sorte que la puissance isotrope rayonn e quivalente p i r e ne d passe pas intensit n cessaire l tablissement d une communication satisfaisante Le pr sent appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio exempts de icence L exploitation est autoris e aux deux conditions suivantes 1 l appareil ne doit pas produire de brouillage et 2 l utilisateur de l appareil doit accepter out brouillage radio lectrique subi m me si le brouillage est susceptible d en compromettre le onctionnement ENGLISH 11 Class B digital device notice This Class B digital apparatus complies with Canadian ICES 003 RSS Gen and RSS 210 Cet appareil num rique de la classe B est conforme a norme NMB 003 CNR Gen et CNR 210 du Canada USA Polar Electro Oy has not approved any changes or modifications to this device by the user Any changes or modifications could void the user s authority to operate he equipment FCC regulatory information This device complies with part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interferenc
8. otential for human contact with the antenna during normal operation is minimized ENGLISH 13 A This crossed out wheeled bin marking shows that Polar products are electronic devices and are in the scope of Directive 2002 96 EC of the European Parliament and of the Council on waste electrical and electronic equipment WEEE and batteries and accumulators used in products are in the scope of Directive 2006 66 EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators and waste batteries and accumulators These products and batteries accumulators inside Polar products should thus be disposed of separately in EU countries ES This marking shows that the product is protected against electric shocks Bluetooth QD ID BO20404 14 ENGLISH Manufactured by Polar Electro Oy Professorintie 5 FIN 90440 KEMPELE Tel 358 8 5202 100 Fax 358 8 5202 300 www polar com POLAR LISTENS TO YOUR BODY
9. r com en regulatory_information Compliance Statement Canada Polar Electro Oy has not approved any changes or modifications to this device by the user Any changes or modifications could void the user s authority to operate he equipment Polar Electro Oy n a approu aucune modification apport e l appareil par l utilisateur quelle qu en soit a nature Tout changement ou toute modification peuvent annuler le droit d utilisation de l appareil par utilisateur Industry Canada IC regulatory information Under Industry Canada regulations this radio ransmitter may only operate using an antenna of a type and maximum or lesser gain approved for the ransmitter by Industry Canada To reduce potential 10 ENGLISH radio interference to other users the antenna type and its gain should be so chosen that the equivalent isotropically radiated power e i r p is not more than that necessary for successful communication This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Avis de conformit la r glementation d Industrie Canada Conform ment la r glementation d Industrie Canada e pr sent metteur radio peut fonctionner avec une antenne d un type et d un gain maximal ou in
10. sumer s rights against the purchase contract guarantee is issued by Polar Electro Inc for consumers who have USA or Canada This antee is issued by who have purchased nc guarantees the this device that the s in material or rom the date of rchase is your proof e battery normal wear and tear damage due to misuse abuse accidents or non compliance w improper maintenance comme ith the precautions rcial use cracked broken or scratched cases disp elastic strap and Polar apparel The guarantee does not cover a consequential or special arisin he product stipulated by local law either repaired or replaced at a Polar Service Centers regardles purchase ENGLISH ays armband ny damage s losses costs or expenses direct indirect or incidental g out of or related to Items purchased second hand are not covered by he two 2 year warranty unless otherwise During the guarantee period the product will be ny of the authorized s of the country of Guarantee with respect to any product will be limited to countries where the product has been initially marketed Disclaimer Polar Electro Inc Polar Electro Oy disclaims any and all iabilities related to or arising from third parties products or services which use the data generated by a Polar product Polar Electro Inc Polar Electro Oy disclaims any and all liabilities related to or arising rom the functioning malfunctioning of
11. the holder on top of the tongue of the shoe Make sure the holder flap is facing upwards 2 Thread the laces in through the holes on the sides of the holder and out through the hole on the bottom of the holder pictures C1 and C2 Thread the laces through the small flap on the tongue of the shoe to ensure the holder does not move while running 3 Tighten the laces 4 Fit the front part of the sensor into the holder and press from the rear picture C3 Fasten the flap 5 Make sure the sensor does not move and is aligned with your foot The more secure the sensor the more accurately speed and distance is measured 4 ENGLISH Calibrate the Stride Sensor Calibration of the stride sensor improves the accuracy of speed pace distance and stride length measurements It is recommended that you calibrate the stride sensor before using it for the first time if there are significant changes in your running style or if the position of the stride sensor on the shoe is dramatically changed e g if you have new shoes or if you switch the sensor from your right shoe to your left one The calibration should be done at the speed you normally run Calibration is done via the receiving device See the user guidance material of the receiving device or mobile application for instructions Service During the two year guarantee warranty period we recommend that you have service other than battery replacement done by an authorized Pol
Download Pdf Manuals
Related Search