Philips SBC HC 320 User's Manual
Contents
1. Connect the audio source CD player TV HiFi to the FM transmitter with the HiFi audio cable as shown in Figure 2 Insert the rechargeable batteries supplied 2 x R3 AAA into the battery compartment as shown in Figure 3 Ensure that the polarity is correct Note Please ensure that the batteries are fully charged for 16 hours before using the FM headphone for the first time This will guarantee a longer operating lifetime of the batteries Operation e Switch on the FM headphone Set the volume control on the FM headphone to maximum Apply an audio signal to the transmitter using an audio source such as CD player TV or HiFi The FM transmitter will switch on automatically Tune the tuning control on the headphone until signal audio sound is at its clearest Adjust the volume of the audio source to the highest acceptable undistorted level e While listening adjust the volume with the control on the headphone to an acceptable level 7 Recharging Note Please ensure that the batteries are fully charged for 16 hours before using the FM headphone for the first time This will guarantee a longer operating lifetime of the batteries 1 Switch off the power of the headphone before charging 2 Note Before using the FM headphone for the first time please ensure that the batteries are fully charged for 16 hours This will guarantee a longer operating lifetime of the batteries 3 Connect the recharge input o2. FM headphone set incorporates recharge facilities for recharging the batteries No space limitation the FM headphone receiver is able to receive signals from the transmitter even through barriers such as doors walls and glasses e Multiple headphones with one transmitter additional number of headphones and or wireless speakers can be used with a single transmitter Components included In this FM headphone set the following components are included e FM transmitter SBC HC322 FM receiver headphone SBC HC325 AC DC adapter 12 Volt 200 mA HiFi audio cable e Recharge cable Rechargeable batteries RO3 AAA 3 5 mm to 6 3 mm stereo adapter Explanation of Controls Transmitter Aerial 2 Power On Off indication 3 Charge indication 4 Recharge power output to charge the batteries of the FM headphone 5 Input 3 5 mm stereo connector for input of audio signal 6 DC input connector to power the FM transmitter 7 Tuning control Receiver 8 Charge indication 9 Tuning control 10 Power On Off switch 11 Charge input 12 Volume control 13 Power On Off indication English SBC HC320 5 Installation Please ensure that the rated voltage of the AC DC adapter is the same as the mains power supply Connect the AC DC adapter to the mains power supply outlet Insert the DC connector of the AC DC adapter into the 12 Volt DC input connector located on the rear of FM transmitter as shown in Figure 2
3. English SBC HC320 Instruction for use Introduction Congratulations You have just bought a most sophisticated FM wireless stereo sound system This system uses the latest FM wireless technology which gives you complete freedom of movement while enjoying your own favorite music No more inconvenienc from cables or headphone wires To ensure you get the best performance of your FM stereo sound system please read this document carefully Features e Wireless transmission the FM transmitter transmits the stereo audio signal from your audio or video source to your FM headphone receiver without wires e Wide transmission range the FM headphone receiver receives signals from up to 100 meter away from the FM transmitter High frequency radio system the FM headphone set uses a high radio frequency as the signal carrier ensuring a very clear sharp reception Automatic Level Control ALC prevents overload of transmitter over a wide level of input signal Mute function reduces the noise level by 90 when the sound signal is too low or not available This feature makes it possible to have the noise reduced when e g tuning the receiver to the transmitter Automatic power on off the FM transmitter automatically switches on and starts transmitting when signals are sensed at the input indicated by a red LED When there are no signals at the input the FM transmitter automatically switches off Rechargeable system the
4. n the headphone with the charge output on the transmitter via the recharge cable see figure 3 4 The charge indication LED on the headphone will light to indicate that the batteries are charging 5 The batteries are fully charged after charging for at least 12 hours Do not charge longer then 16 hours this will reduce battery performance Specifications System Radio Frequency RF Carrier frequency Tunable 433 2 to 434 7MHz Modulation Frequency Modulation FM Radiated output power 2 m Watt Effective transmission range 60 100 meter omni directional 360 Input level 150 mVolt Power supply transmitter 12Volt 200 mA DC Power supply receiver 2x R3 AAA batteries NiCd Frequency range headphone 40 18 000 Hz Signal Noise ratio gt 55dB Distortion lt 0 5 THD Channel separation gt 30 dB Explanation of Controls Figure 1 Figure 3 NS Yod z er y1 Instructions for use Mode d emploi Bedienungsanleitung Gebruiksaanwijzing Istruzioni Modo de emprego Instrucciones de uso Bruksanvisning OdnyieG XprjoewG 8 FA at FAS B PHILIPS SBC HC320
Download Pdf Manuals
Related Search