Home

Philips MX5800SA/21 User's Manual

1. v Speaker layout In disc mode press SYSTEM MENU Use the joystick lt gt A V on the remote to navigate in the menu Select icon and press V Move to C and press P Move to Speaker Layout and press P Rectangular 1 Rectangular 2 Trapezoid 1 Trapezoid 2 Personal OK to exit Select the layout that most closely resembles your speakers arrangement then press OK gt The speaker output will adjust automatically to suit the selected speaker layout settings based on the seating position in the middle To change the seating position see Changing seating control position gt If you choose Personal the speaker output will follow the settings in the Speakers menu see next page Setting the speakers channels To remove the menu Press SYSTEM MENU Changing seating control position Normally the best sound spot and the ideal setting position is in the middle of the room With this SEATING feature it allows you to select the current seating position in the room and the speaker setting will automatically be adjusted for optimum performance SYSTEM MENU DISC MENU O Press SURR or SURROUND on the front panel repeatedly to select Multi channel Press SEATING gt The seating control diagram which represents your current speaker layout appears on the TV screen To change the speaker layout see Selecting speaker layout Us
2. 45 Switching to Eco Power standby mode 45 Switching to standby mode view clock 45 Dimming system s display screen 45 Recording to an external device 45 Using the remote to operate your television 45 Troubleshooting 46 47 Specifications 48 Glossak y oon meis 49 Contents Gerenal Information Supplied accessories Surround centre speaker cable Front speaker and Subwoofer cables Audio cable red white Composite video cable yellow Component video cables red blue green FM wire antenna MW loop antenna Remote control and two batteries PHILIPS AC power cable Mini speaker stands gt and screws Brackets and screws Additional accessories Adaptor for version 21S only Care and safety information Avoid high temperatures moisture water and dust Do not expose the system batteries or discs to humidity rain sand or excessive heat caused by heating equipment or direct sunlight Always keep the disc tray closed to avoid getting dust on the lens Avoid condensation problem The lens may cloud over when the player is suddenly moved from cold to warm surroundings making it impossible to play a disc Leave the player in the warm environment until the moisture evaporates Do not block the vents Do no
3. 20 Setting the speakers channels 21 Step 5 Setting language preference 21 Disc Operations Playable GISCS its 22 Playing diSes cioe EDEN RE 22 Turning on off auto Eco standby mode 23 Using the Disc Menu eere 23 Basic playback controls nae 23 Resuming playback from the last stopped point DVD VCD 23 Replacing discs without interrupting A e cose a NUMN 23 Selecting various repeat functions 24 Repeat play mode 24 Repeating a section within a chapter e aee asa 24 Programme favourite tracks audio CDs Only sra 24 25 Clearing the programme 25 Using the menu bar to programme 26 Playing MUS dla ati 27 Programme MP3 discussi these aes 27 DVD Menu Options Using the menu bar arras 28 Using the Karaoke feature 29 Using the Setup Menu User Preference A osse dp Er II M RUE 30 Setting the TY shape siria 30 Improving the image for NTSC setting 31 Adjusting the picture position on the TV 31 Selecting a predefined colour setting 31 Fine tuning the personal colour setting 32 Improving the image for Progressive Scan Video output setting da sasissececsesncacrsciensernasvene 32 Setting the digital output 33 Setting the PCM output nana 33 Setting the analogue ou
4. Close the cover Using the remote control to operate the system Aim the remote control directly at the remote sensor R on the front panel O Select the source you wish to control by pressing one of the source select buttons on the remote control for example TV AV TUNER Then select the desired function for example P Il de gt CAUTION Remove batteries if they are exhausted or if the remote is not to be used for a long time Do not use old and new or different types of batteries in combination Batteries contain chemical substances so they should be disposed of properly 18 Step 2 Setting the clock The clock can be set in either 12 hour or 24 hour mode Hz LILI HPT or LELEI for example buttons on DVD system s front spans e panel gt gt gt CLOCK TIMER eoo Q ed SEARCH PPI 0100 O o TIMER O Press STANDBY ON to switch on the DVD system o Press and hold CEO TIMER nae I qur appears O Press no ad necessary to change the display to LAL LA then press CLOCKe TIMER again to urn O Press 4 lt P to set the minutes and hours To increase the speed hold down a lt gt gt The changes in minutes will roll over to the hours O Press PROG to change between 12 hour and 24 hour clock mode Press CLOCK TIMER again to store the setting gt The clock will start wor
5. gt Locked discs will not play unless you enter playing by locking or unlocking the DVD your four digit code regardless of its rating HEF eee SS Child lock Parental level Change country Change code O Press SYSTEM MENU again to remove the menu Note Lock Unlock each side of two sided DVDs and each volume of multi volume Video CDs In disc mode press SYSTEM MENU Select icon and press V Use the joystick A V on the remote to navigate in the menu Move to Wii and press P Move to Access Control and press P SS l Access control IMITA Enter code Use the numeric keypad 0 9 to enter the four digit code You may have to enter the same code exactly twice gt If not successful see page 36 Changing the password Enabling Play once Play Always You can enable or disable viewing of a specific disc The DVD system can memorise settings for 120 discs When you select Play Always the disc currently in the player moves to the top of the list When the list is full and you add a new disc the last disc in the list will drop out of the list Insert a disc gt The Access Control message will appear on the TV screen locked e v Play once 0011 Play always 0000 Choose play always for inserting disk in child safe list Press A V to select Play once or Play always Then enter the four digit code gt Play on
6. is set to On Favorite Track Selection Stop playback then select this to enter the programme menu see page 26 Using the menu bar to programme o DVD Menu Options Using the Karaoke feature Set the MIC LEVEL control at the front panel to the minimum level turn to left to prevent acoustic feedback when connecting the microphone Plug in the microphone to the MIC input Load a karaoke disc gt Plugging in or out the microphone will automatically turn on or off the karaoke mode respectively Adjust the MIC LEVEL control to select the microphone volume level Some VCDs or SVCDs are recorded on multiple audio channels For example a Karaoke disc may record music on the left channel and vocals on the right channel To choose an audio channel use the joystick lt P to select and press V repeatedly to make your selection 29 DVD Menu Options Using the Setup Menu User Preference Settings The format you select must be available on the disc If it is not the setting for TV Shape will This DVD setup is carried out via the TV not affect the picture during playback enabling you to customise the DVD system to suit your particular requirements Follow the steps of Using the Setup Menu and select NY SYSTEM MENU N A DISC MENU M gt TV iii y TV Shape gt 4 3 letterbox 4 3 panscan 16 9 PREV NEXT STOP PLAY PAUSE O In disc
7. 0 9 to select the TV s channel Press TV VOL to adjust the TV s volume level O Press 5 to turn off your TV 45 Troubleshooting WARNING Under no circumstances should you try to repair the system yourself as this will invalidate the warranty Do not open the system as there is a risk of electric shock If a fault occurs first check the points listed below before taking the system for repair If you are unable to remedy a problem by following these hints consult your dealer or Philips for help Problem Solution No power No picture Distorted or poor picture Completely distorted picture or black white picture The aspect ratio of the screen cannot be changed even though you have set the TV display No sound or distorted sound The DVD system does not work Check if the AC power cord is properly connected Press the STANDBY ON on the front of the DVD system to turn on the power Refer to your TV s manual for correct Video In channel selection Change the TV channel until you see the DVD screen Press DISC on the remote Sometimes a small amount of picture distortion may appear This is not a malfunction Clean the disc TVs have a colour system standard If the disc s or DVD system s colour system is different than your TV s colour system the picture may be distorted or colourless Set to the correct TV System setting The aspect ratio is fixed on the DVD di
8. An FTS programme can contain 20 items Titles Chapters etc IMPORTANT It is only possible to programme from the current selected disc tray You have to turn on your TV and set to the correctVideo In channel See page 19 Setting the TV O Insert a disc DVD Video CD or Audio CD O In disc mode press SYSTEM MENU gt The menu bar will appear across the top of the TV screen Use the joystick lt 4 to select A and press V to enter the programme menu gt FTS menu appears A T example for DVD FTS menu FTS On Title 12 345 6 7 8 9 gt Chapter 1284561852 Program Clear all O Press Y repeatedly to select Title Track in the menu O To programme the entire Title Track press OK OR Press lt P to select the required Title Track number then press OK to store gt The number will appear on the Program line O To programme only certain Chapter Index of the selected Title Track go to step O not applicable for Audio CDs O Move to Chapter Index in the menu then press lt P to select the required Chapter Index number and press OK to confirm gt The Title Chapter or Track Index number will appear on the Program line 9 Repeat steps 0 0 to select others Title Track or Chapter Index Press A to select FTS then press P to select programme On or Off and press OK to confirm O Press H to start playback
9. Connect the supplied FM antenna to the FM jack Extend the FM antenna and fix its ends to the wall For better FM stereo reception connect an external FM antenna not supplied MW FM ANTENNA m Notes Adjust the position of the antennas for optimal reception Position the antennas as far as possible from your TV VCR or other radiation source to prevent unwanted interference 11 Connections Step 6 Connecting TV VIDEO une OUT OUT CVBS O DIGITAL S VIDEO O e 12 IMPORTANT You only need to make one video connection from the following options depending on the capabilities of your TV system Connect the DVD system directly to the TV Using Composite Video jack CVBS Use the composite video cable yellow to connect the DVD system s CVBS jack to the video input jack or labelled as A V In Video In Composite or Baseband on the TV To hear the TV channels through this DVD system use the audio cables white red to connect TV IN L R jacks to the corresponding AUDIO OUT jacks on the TV Set the P SCAN switch to OFF VIDEO IN S VIDEO IN AUDIO Price OUT 000 o IMPORTANT Component Video connection provides higher picture quality This option must be available on your TV The progres
10. System 5 multi directional driver Impedance 40 Speaker drivers 4 x 2 woofer 1 3 4 ribbon tweeter 120 Hz 20 kHz 435 x 72 x 63 5 mm 1 32 kg Frequency response Dimensions w x h x d Weight TWIN SUBWOOFER Impedance 40 Speaker drivers 4 woofer Frequency response 30 Hz 120 Hz Dimensions Base diametre 240 x 40 mm Tube 110 x 900 mm Weight 4 5 kg Analogue Sound that has not been turned into numbers Analogue sound varies while digital sound has specific numerical values These jacks send audio through two channels the left and right Aspect ratio The ratio of vertical and horizontal sizes of a displayed image The horizontal vs vertical ratio of conventional TVs is 4 3 and that of wide screens is 16 9 AUDIO OUT Jacks Jacks on the back of the DVD System that send audio to another system TV Stereo etc Bit Rate The amount of data used to hold a given length of music measured in kilobits per seconds or kbps Or the speed at which you record Generally the higher the bit rate or the higher the recording speed the better the sound quality However higher bit rates use more space on a Disc Chapter Sections of a picture or a music piece on a DVD that are smaller than titles A title is composed of several chapters Each chapter is assigned a chapter number enabling you to locate the chapter you want Clear voice lt enables the digital sound processor to extract the voice dynamics i
11. OY FM ANTENNA DIGITAL IN o IMPORTANT If your TV only has a single Antenna In jack or labelled as 75 ohm or RF In you will need an RF modulator in order to view the DVD playback on the TV See your electronics retailer or contact Philips for details on RF modulator availability and operations Using an accessory RF modulator Use the composite video cable yellow to connect the DVD system s CVBS jack to the video input jack on the RF modulator Use the RF coaxial cable not supplied to connect the RF modulator to your TV s RF jack Set the P SCAN switch to OFF 13 Connections Step 7 Connecting the power cord After everything is connected properly O Set the VOLTAGE SELECTOR to the local power line voltage Plug in the AC power cord to the power outlet Never make or change any connections with the power switched on On the DVD system appear on the display panel Press P IH on the front panel to store all available radio stations or press M to exit see page 40 Tuner Operations Pil pel PLAY PAUSE SURROUND KTIMER ae O O 14 Connecting aVCR or Cable Satellite Box n o VCR or NC Cable Satellite Box Viewing and listening to the playback Connect the VCR or
12. gt If FTS set to On the programme will play gt If FTS set to Off tracks will play in normal order O n stop mode you can press PROG on the front panel to toggle between programme on and off To erase an FTS programme O Move to Program in the menu O Press 4 to select the required number then press OK to erase To erase the entire FTS programme O Move to Clear all in the menu then press OK to erase Playing MP3 IMPORTANT You have to turn on your TV and set to the correctVideo In channel See page 19 Setting the TV O Load an MP3 disc gt The disc reading time may exceed 30 seconds due to the complexity of the directory file configuration e Playback will start automatically A list of albums tracks menu will appear on the TV example for MP3 album menu v Album name 1 Album name 2 Album name 3 Album name 4 Album name 5 example for MP3 track menu y gt Title name 1 Time 0 00 31 Title name 2 Title name 3 Title name 4 Title name 5 O During playback you can use the joystick A V on the remote to select another track in the current album O To select another album from the current MP3 disc press to return to the album menu then use the joystick A V to make your selection and press OK to confirm O Press P Ill to pause resume playback To stop playback press M Disc Operations Notes Due to the recording
13. nature of Digital Audio MP3 DAM only digital audio music will play It is normal to experience an occasional skip while listening to your MP3 discs For multi session discs with different formats only the first session will be available Some MP3 discs may be distorted during playback due to the configuration and characteristics of the disc Programme MP3 disc It is only possible to programme from the last selected album Up to 99 tracks can be stored in the programme qp Stop playback press M O use the joystick P on the remote to toggle between MP3 album and track menu then press AW to make your selection gt Only the tracks from the last selected album can be programmed e Press PROG to add the desired tracks into the programming list gt will appear in front of the selected tracks gt To cancel the current selection press PROG again x Track 01 Time 2 32 Ay STRIS Program On Track 03 Track 04 Track 05 Press OK to play the tracks Press OK to confirm and begin the programme playback gt A list of programme tracks appear on the menu Clearing the programme Stop playback then press M again Note If the DVD system is disconnected from the power supply or the programmed disc tray is opened it will erase the programme 27 DVD Menu Options Using the menu bar Subtitle Language Press AV to select a subtitle lan
14. on the display panel To cancel the sleep timer or press the STANDBY ON button Timer Operations 43 Sound and Volume Controls 44 Sound Control IMPORTANT For proper surround sound make sure the speakers and subwoofer are connected see page 10 Selecting surround sound Press SURROUND SURR to select MULTI channel 3D SOUND or STEREO gt The availability of the various surround sound modes depends on the number of speakers used and the sound available on the disc gt The centre and surround speakers operate only when the DVD home cinema system is set to Multi channel mode gt The available output modes for Multi channel include Dolby Digital DTS Digital Theatre Systems Surround and Dolby Pro Logic gt Stereo broadcasts or recordings will produce some surround channel effects when played in a surround mode However mono single channel sound sources will not produce any sound from the surround speakers Note You are not able to select the surround sound mode if the system menu menu bar is turned on Turning on off clear voice effect You can enhance the centre and surround sound outputs by activating the clear voice sound feature if you have selected Multi channel as the surround mode Press YORE 0 on n tne i remote to select gt Tot turn off the setting a VICE again to select I LI Changing subwoofer volume level Press SUB on the remote to adjust s
15. tray or put any objects other than discs on the disc tray Doing so may cause the disc player to malfunction Playable discs Your DVD home cinema system will play Digital Video Discs DVDs Video CDs VCDs Super Video CDs SVCDs Super Audio CDs SACDs Digital Video Discs Rewritable DVD RW Compact Discs CDs MP3 discs Maximum 30 characters display Supported sampling frequencies 32 kHz 44 1 kHz 48 kHz Supported Bit rates 32 256 kbps variable bit rates aise ise Cp DIGITAL VIDEO SUPER VIDEO SUPER AUDIO CD VIDEO diers WEE WEG DVD ReWritable DIGITAL AUDIO GERIREMQ ReWritable Region Codes DVDs must be labelled for ALL regions or for versions 21R Region 3 or for versions 21S Region 4 in order to play on this DVD system You cannot play discs that are labelled for other regions If you are having trouble playing a certain disc remove the disc and try a different one Improperly formatted discs will not play on this DVD system e IMPORTANT If che inhibit icon or X appears on the TV screen when a button is pressed it means the function is not available on the current disc or at the current time Playing discs Adjust SOURCE control until fi ff X7 appears on the display panel or press DISC MEDIA on the remote Turn on the TV power and set to the correct Video In channel See page 19 Setting the TV gt You should see the
16. 531 1602 kHz 9 kHz MW 530 1700 kHz 10 kHz 26 dB Quieting Sensitivity FM 20 dB MW 3162 mV m Image Rejection Radio FM 25 dB MW 28 dB IF Rejection Ratio FM 60 dB MW 24 dB Signal to Noise Ratio FM 60 dB MW 40 dB AM Suppression Ratio FM 30 dB FM Mono 3 FM Stereo 3 MW 5 FM 180 Hz 10 kHz 6 dB FM 26 dB 1 kHz FM 23 5 dB Harmonic Distortion Frequency Response Stereo Separation Stereo Threshold DISC SECTION Laser Type Semiconductor Disc Diametre 12cm 8cm Video Decoding MPEG 2 MPEG 1 Video DAC 10 Bits Signal System PAL NTSC Video Format 4 3 16 9 Video S N 56 dB minimum Composite Video Output 1 0 Vp p 75 Q S Video Output Y 1 0Vp p 75 Q C 0 286 Vp p 75 Q 24 Bits 96 kHz 4 Hz 20 kHz 44 1 kHz 4 Hz 22 kHz 48 kHz 4 Hz 44 kHz 96 kHz SPDIF Sony Philips digital interface Coaxial IEC 60958 IEC 60958 IEC 61937 Audio DAC Frequency Response Digital Output Input PCM Dolby Digital DTS 48 MAIN UNIT Power Supply Rating 230 240 V 50 Hz 110 127 220 240 V 50 60 Hz Switchable Power Consumption 150 W Dimensions w x h x d 435 x 100 x 360 mm Weight 7 15 kg SPEAKERS Front speakers Rear surround speaker System triple driver Impedance 40 2 x 3 woofer 1 x 2 ribbon tweeter 120 Hz 50 kHz 94 x 280 x 70 mm 1 23 kg each Speaker drivers Frequency response Dimensions w x h x d Weight CENTRE SPEAKER
17. Cable Satellite Box to the TV as shown Connect the DVD system s AUX IN R L jacks to the AUDIO OUT jacks on the VCR or cable satellite box Before starting operation press AUX DI on the remote to select iix in order to activate the input source Using the VCR for recording DVDs Some DVDs are copy protected You cannot record or dub protected discs using a VCR Connect the DVD system s CVBS jack to the VIDEO IN jack on the VCR Connect the DVD system s LINE OUT R L jacks to the AUDIO IN jacks on the VCR This will allow you to make analogue stereo two channel right and left recordings To view DVD playback while recording you must connect the DVD system to your TV using the S VIDEO as shown above or the Component Pr PbY video connection Connections optional Connecting digital audio equipment Dx Dx DJ PY JPEAKER SYSTEMS 40 SUI ROUND CENTER FRONT e o DIGITAL OUT gt Ja for example CD Recorder Listening to the playback Connect the DVD system s DIGITAL IN jack to the DIGITAL OUT jack on a digital audio device Before starting operation press AUX DI on the remote to select i in order to activate the input source Connect the DVD system s DIGITAL OUT jack to the DIGITAL IN jack on a digital recording device DTS Digital Theatre System compatib
18. DVD VIDEO SACD DIGITAL SURROUND SYSTEM PHILIPS M xico N0M Es necesario que lea cuidadosamente su instructivo de manejo PRECAUCI N ADVERTENCIA No abrir riesgo de choque el ctrico ATENCI N Verifique que el voltaje de alimentaci n sea el requerido para su aparato Para evitar el riesgo de choque el ctrico no quite la tapa En caso de requerir servicio dirijase al personal calificado Descripci n Sistema receptor reproductor de DVD Modelo MX5800SA 21 Alimentaci n 110 127 220 240V 50 60 Hz Consumo 150 W Importador Philips Mexicana S A de C V Domicilio Av La Palma No 6 Col San Fernando La Herradura Huixquilucan Localidad y Tel Edo de M xico C P 52784 Tel 52 69 90 00 Exportador Philips Electronics HK Ltd Pa s de Origen China IN de Serie LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO CAUTION AVISO IMPORTANTE Use of controls or adjustments or Philips Mexicana S A de C V no se hace responsable por dafios o desperfectos causados por performance of procedures other Maltrato descuido o mal uso presencia de than herein may result in hazardous insectos o roedores cucarachas ratones etc radiation exposure or other unsafe Cuando el aparato no haya sido operarado de acuerdo con el instructivo del uso fuera operation de los valores nominales y tolerancias de las tensiones voltaje frecuencia ciclaje de alimentaci n el
19. Press lt P to move through the menu bar Camera Angle gt Press V to enter the selection If there are Press AW to select to view the same scene multiple choices available press W repeatedly from dierent angles toe DVD ie recorded with multiple angles to select Press OK to confirm the selection Enlarge Picture Press AV to select an enlarge picture ratio 1 33 2 or 4 then press OK to confirm You can use the joystick gt A V to move gt Playback will resume or begin automatically To remove the menu within the enlarged picture on the TV To resume normal playback select the zoom Press SYSTEM MENU factor Off from the menu i Disc IMPORTANT Press AV to select a disc tray and the Some operations may be different or playback will start automatically restricted depending on the disc format Refer to the jacket or case of the disc Mu AW to select a Title number you are playing if available for playback to begin Changing the Subtitle Language and Audio Language from the menu bar will Chapter only apply to the current disc it will not Press A V to select a Chapter number change the default preset if available for playback to begin 28 Time Search The playback will pause and a time edit box appears on the display Use the numeric keypad 0 9 to enter the time hours minutes seconds at which you want playback to begin then press OK to start playback this function is not available if the PBC
20. ayback of the disc by the age of the users according to the limitation level in each country The limitation varies from disc to disc when it is activated playback will be prohibited if the software s level is higher than the user set level Glossary PCM Pulse Code Modulation A system for converting analogue sound signal to digital signal for later processing with no data compression used in conversion Playback control PBC Refers to the signal recorded on video CDs or SVCDs for controlling reproduction By using menu screens recorded on a Video CD or SVCD that supports PBC you can enjoy interactive type software as well as software having a search function Plug and Play After power up the system will prompt the user to proceed with the automatic installation of radio stations by simply pressing the PLAY button on the main unit Progressive Scan It displays all the horizontal lines of a picture at one time as a signal frame This system can convert the interlaced video from DVD into progressive format for connection to a progressive display It dramatically increases the vertical resolution Region code A system for allowing discs to be played back only in the region designated beforehand This unit will only play discs that have compatible region codes You can find the region code of your unit by looking on the product label Some discs are compatible with more than one region or ALL regions S Video Produces a
21. been ejected press P II To cancel the resume mode In stop mode press M again Notes Obening the current disc tray or selecting another disc tray will cancel the resume feature Resume option may not be available on some discs Replacing discs without interrupting playback Press OPEN CLOSE 4A buttons of the inactive disc trays For example if currently disc tray 1 is playing you can replace the discs on disc trays 2 5 23 Disc Operations Selecting various repeat functions Repeat play mode While playing a disc press REPEAT to select REPEAT CHAPTER DVD to repeat playback of the current chapter REPEAT ALBUM MP3 to repeat playback of the current album REPEAT TRACK TITLE to repeat playback of the current track title REPEAT DISC to repeat playback of the current disc or the programmed tracks if the programme mode is active REPEAT ALL to repeat playback of all available discs or the programmed tracks if the programme mode is off REPEAT OFF to cancel the repeat mode Notes Repeat play might not work correctly with some DVDs For VCD if the PBC mode is switched on repeat play is not possible Repeating a section within a chapter track While playing a disc press REPEAT A B at the starting point O Press REPEAT A B again at the point to end 24 the section gt The section A and B can be set only within th
22. blue Philips DVD background screen on the TV Press OPEN CLOSE 4 button once to open the disc tray and load a disc then press the same button again to close the disc tray gt Make sure the disc label is facing up For double sided discs load the side you want to play face up Repeat step O for loading a disc onto another disc tray Playback will start automatically from the last loaded disc gt All the available discs will play once then stop gt f a disc menu shows on the TV see next page on Using the Disc Menu gt If the disc is locked by parental control you must enter your four digit password See page 37 To obtain the best surround effects see page 20 Changing seating control position Note Only one tray can be opened at a time If you intend to open the second tray before closing the first tray the first tray will automatically close before the second tray opens Turning on off auto Eco standby mode This is a power saving feature the system will automatically switch to Eco standby mode if you do not press any buttons within 30 minutes after a disc has stopped playing buttons on front panel DVD system s display panel O Press and hold STANDBY ON to switch the system to standby mode gt The clock appears O Press and hold Bl until ATO ECO OH appears gt To turn off the setting repeat step O until CG i PE Ei Using the Disc Menu Depending on th
23. ce the disc can play as long as it is in the disc tray and the DVD system power is on gt Play always the disc will play always even the Child Lock is set to lock If you later want to lock the disc so it will not play always insert the disc and press M while the safe icon appears on the TV screen gt Locked icon will appear You may need to remove the disc or turn off the power before the disc is completely locked The next time when you insert the disc it will not play unless you enter the four digit code DVD Menu Options If a disc has Parental Level coding the codings are applicable only for the country specified on the disc The disc manufacturer sets these codings For example a disc may be coded at level 3 for United States So for some discs you may need to choose the country for which the disc is coded in order for the disc to play at the Parental Level you select see page 34 O n disc mode press SYSTEM MENU O Select icon and press Y Use the joystick 4 A V on the remote to navigate in the menu Move to Bil and press P Move to Access Control and press P Mos SA TE 11 11 11 1 Enter code Use the numeric keypad 0 9 to enter the four digit code You may have to enter the same code exactly twice gt If not successful see page 36 Changing the password O Move to Change country and press P Mo SS TU Child lock Parental level Change c
24. ckward forward or selects a track TUNER tunes the radio frequency up down or selects a preset radio station On the remote it can only tune the radio frequency up down CLOCK sets the minutes and hours SEATING only available in Multi channel mode Turns on off the seating control diagram on the TV Use the VOLUME control on the main unit or joystick on the remote to select the desired seating position SURROUND SURR Selects multichannel surround 3D sound or stereo mode SOURCE Selects the relevant active mode TV AV DISC TUNER AUX DI DISC toggles between DISC 1 5 only on the main unit TUNER toggles between FM and MW band AUX DI toggles between AUX and DI Digital Input mode CLOCK TIMER Enters clock or timer setting mode Shows clock display for a few seconds MIC LEVEL Adjusts the mixing level when using the microphone MIC Plug in the microphone jack Press and hold the button for more than two seconds 16 VOLUME VOL Adjusts the volume level BASS TREBLE Selects bass or treble sound Use the VOLUME control to select the desired enhancement level D n Plugging in the headphones jack The speakers output will be cancelled Control buttons available on the remote only SYSTEM MENU DVD mode only Enters or exits system setup menu Joystick lt AV Selects movement direction in the menu Use lt P to select a preset rad
25. clear picture by sending separate signals for the luminance and the colour You can use S Video only if your TV has S video In jack Sampling Frequency Frequency of sampling data when analogue data is converted to digital data Sampling frequency numerically represents how many time the original analogue signal is sampled per second Seating control lt gives the user a perfect sound and movie experience anywhere in the room providing maximum flexibility and real total immersion because the user can choose their preferred seat Super Audio CD SACD This audio format is based upon the current CD standards but includes a greater amount of information which provides higher quality sound There are three types of discs single layer double layer and hybrid discs The hybrid disc contains both standard audio CD and Super Audio CD information Surround A system for creating realistic three dimensional sound fields full of realism by arranging multiple speakers around the listener Title The longest section of a picture or music feature on DVD music etc in video software or the entire album in audio software Each title is assigned a title number enabling you to locate the title you want VIDEO OUT jack Jack on the back of the DVD System that sends video to a TV 49
26. ctrica y las caracter sticas que deben reunir las instalaciones auxiliares Por fen menos naturales tales como temblores inundaciones incendios descargas el ctricas rayos etc o delitos causados por terceros choques asaltos ri as etc This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Confidential Unpublished Works 1992 1999 Dolby Laboratories Inc All rights reserved Manufactured under license from Digital Theater Systems inc US Pat No 5 451 942 and other worldwide patents issued and pending DTS and DTS Digital Surround are trademarks of Digital Theater Systems Inc 1996 Digital Theater Systems Inc All rights reserved English Fran ais Fran ais Espa ol Contents General Information Supplied accessories 22 n neoc ias 8 Care and safety information 8 Connections Step 1 Set up
27. e disc a menu may appear on the TV screen once you load in the disc To select a playback feature or item O Use the joystick A V or numeric keypad 0 9 on the remote then press H or OK to start playback To access or remove the menu O Press DISC MENU on the remote For VCD with Playback Control PBC feature version 2 0 only O n stop mode press DISC MENU to toggle between PBC ON and PBC OFF then the playback will start automatically gt If you select PBC ON the disc menu if available will appear on the TV Use the Joystick 4 gt AY to highlight your selection and press OK to confirm or use the numeric keypad 0 9 to select a play option O During playback pressing DISC MENU will return to the menu screen if PBC is on Disc Operations Basic playback controls Pausing playback Press H gt To resume normal playback press H again Selecting another track chapter Press d d P or use the numeric keypad 0 9 to key in a track chapter number Searching backward forward Press and hold dl gt gt then press P IM to resume normal playback While searching pressing and holding a lt gt gt again will increase the search speed Selecting next disc Press DISC SKIP gt The selected disc will play once then stop Stopping playback Press B Resuming playback from the last stopped point DVD VCD In stop mode and when the disc has not
28. e same chapter track gt The section will now repeat continuously Press REPEAT A B again to resume normal playback Programme favourite tracks audio CDs only You can play the contents of the disc in the order you want by programming the order of the tracks to be played Up to 20 tracks can be stored Press DISC SKIP repeatedly to select a disc tray containing audio CD Wait until the system finishes reading the discs before proceeding to next step O When the playback begins press M to stop playback Press PROGRAM to enter programme mode PEUGEBMM PLL will appear if you have programmed 20 tracks XX number of programmed tracks O Press a a gt or use the numeric keypad 0 9 to enter the track number O Press OK to store the track O Repeat steps O 0 to select other tracks O Press gt IM to start programme playback gt Only the tracks programmed from audio CDs will play Press H to stop playback or exit programme mode Note If you do not press any buttons within 20 seconds the system will exit programming mode Clearing the programme O Stop playback then press M again gt PROG disappears from the display panel and A A S po Fd Et Ee GN appears Disc Operations 25 Disc Operations Using the menu bar to programme Favourite Track Selection FTS lets you play your favourite Titles Chapters or Tracks Indexes in the order you select
29. e the joystick 4 A V on the remote or VOLUME control on the front panel to select your current seating position gt During playback you can hear the changing of sound effect when you change the seating position gt If you do not press any buttons within five seconds the seating control diagram will exit from the TV and the system will execute the last selected seating position If you want to turn off the seating feature pres s d jue 9 PERGOBMBML SE PH appears and the sien willt revert to he verona speaker settings Setting the speakers channels You can adjust the delay times centre and surround only and volume level for individual speakers These adjustments let you optimise the sound according to your surroundings and setup Speaker settings are only active on Multi channel audio outputs ABO O Press SURR or SURROUND on the front panel repeatedly to select Multi channel In disc mode press SYSTEM MENU Use the joystick 4 A V on the remote to navigate in the menu O Select icon and press V Move to C and press P Move to Speakers and press P O Press A Y to select Front L amp R Center Surround L amp R Sub Woofer then press gt to enter the speaker setting menu gt The test tone will be automatically generated Use A Y to adjust the settings for each speaker that suit your surround sound needs which may includes A Adjusting the volume
30. eakers supplied Please refer to the SPECIFICATIONS section of this manual Surround speaker left front speaker with subwoofer stand left Centre speaker Step 4 Placing the speakers and subwoofers Centre speaker and DVD system Front speaker with subwoofer stand Left Front speaker with subwoofer stand Right Surround Speaker Surround Speaker Left Right For best possible surround sound all the speakers should be placed at the same distance from the listening position O Place the left and right front speakers with subwoofer stands at equal distances from the TV and at an angle of approximately 45 degrees from the listening position O Place the centre speaker above the TV or the DVD system so that the centre channel s sound is localised Place the surround speakers at normal listening ear level facing each other or mounted on the wall Notes To avoid magnetic interference do not position the front speakers too close to your TV Allow adequate ventilation around the DVD system Connections Step 5 Connecting FM MW antennas FM Kij FM ANTENNA VIDEO OUT Pi SPEAKER SYSTEMS 40 SURROUND CENTER FRONT S VIDEO O Connect the supplied MW loop antenna to the MW jack Place the MW loop antenna on a shelf or attach it to a stand or wall
31. ed screws Then mount a screw not supplied on the wall where the speaker is to O If you want to disconnect speaker from the subwoofer stand press the button at the rear of subwoofer stand while pulling up the be hung and hook the speaker securely onto speaker the mounted screw Note The front speakers are labelled as FRONT L CAUTION left or FRONT R right You should get a qualified person to attach the brackets to the wall DO NOT do it by yourself to avoid unexpected damage to the equipment or injury to personnel Note The surround speakers are labelled as REAR L left or REAR R right Connections 10 Step 3 Connecting speakers and twin subwoofer front speaker with subwoofer stand right Surround speaker right Connect the supplied speaker systems using the supplied speaker cables by matching the colours of the jacks and speaker cables Fully insert the stripped portion of the speaker wire into the jacks Front Lee FL y black owe Prone Righe FR R oa red Cewer c f green Surrounds 6D FCI blue Surround Righe SR Back ar Subwoofer L black purple Subwoofer R Notes Ensure that the speaker cables are correctly connected Improper connections may damage the system due to short circuit Do not connect more than one speaker to any one pair of speaker jacks Do not connect speakers with an impedance lower than the sp
32. esetting You can choose to store only your favourite radio stations O n tuner mode press PROGRAM or PROG on the front panel O Press 4 gt or use the numeric keypad 0 9 to select a preset number Press a a BB on the remote to select a radio station O Press PROGRAM again to store Selecting a preset radio station O Press 4 gt or use the numeric keypad 0 9 to select a preset number gt The preset number radio frequency and waveband will appear Deleting a preset radio station Press and mold H until LELE PEL appears gt The c current preset radio station will be deleted and the next available preset radio station will take its place gt All other preset radio stations with higher numbers will decrease by one Tuner Operations Changing tuning grid not available for all versions In North and South America the frequency step between adjacent channels in the MW band is 10 kHz 9 kHz in some areas The preset frequency step in the factory is 9 kHz IMPORTANT Changing the tuning grid will erase all previously stored preset radio stations O Disconnect the system from the AC power supply pull out the AC power cord O while holding down STANDBY ON and OPEN CLOSE A DISCS on the main unit reconnect the system to mhe C parer supply a The ced will show lami iii zi or Notes GRID 9 and GRID 10 indicate that the tuning gr
33. ess you enter your four digit password or choose a higher level rating Select 0 to deactivate Parental level and have all discs play Mo e AU Child lock Parental level Change country Change code Press SYSTEM MENU again to remove the menu gt See page 39 if necessary to select the country for which the Parental Level ratings apply according to your discs Rating explanations NO PARENTAL It will play all discs 8 ADULT Mature material should be viewed only by adults due to graphic sexual material violence or language 7 NC 17 No children under age 17 not recommended viewing for children under age 17 6 PG R Parental Guidance Restricted recommended that parents restrict children under 17 from viewing or allow to view only when supervised by a parent or adult guardian 4PG13 Material is unsuitable for children under age 13 3 PG Parental Guidance suggested 1G General Audience recommended as acceptable for viewers of all ages Note Some DVDs are not encoded with a rating though the movie rating may be printed on the disc jacket The rating level feature does not work for such discs 37 DVD Menu OptionsDVD Menu Options 0 o e 38 Locking Unlocking the DVD for Move to Child lock and press P LOMTE O Press A Y to select lock or unlock then Not all DVDs are rated or coded by the disc press OK maker You can prevent a specific DVD from
34. four numbers you prefer You will have to enter the same code exactly twice This will set your code for the first time Press SYSTEM MENU if this is your first time setting the code gt If you forget your old four digit code press M four times when prompted for the four digit code Then enter any four numbers you prefer twice 36 Restricting playback by Parental Level only available in region 1 players Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc This feature lets you set a playback limitation level The rating levels are from 1 to 8 and are country dependent You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes STOP PLAY PAUSE H Pil O In disc mode press SYSTEM MENU O Select icon and press V O Use the joystick 4 A V on the remote to navigate in the menu Move to Bil and press P Move to Access Control and press P Ui SRA TE 11 11 11 1 Enter code Use the numeric keypad 0 9 to enter the four digit code You may have to enter the same code exactly twice gt If not successful see page 36 Changing the password Move to Parental level and press P Press A V to select a rating level between 0 8 DVD Menu Options and press OK gt DVDs that are rated above the level you selected will not play unl
35. guage You can continue a number of operations available on the DVD directly via the multiple menu bars on the TV Audio Language screen without interrupting the disc playback DVD Press AV to select an audio soundtrack The exception is when you enter SETUP language available on the DVD MENU the playback will pause VCD Select audio channels LEFT VOCAL LL RIGHT VOCAL RL STEREO LR SY NES SYSTEM MENU DISC MENU e es Smart Color Press A to select one of the predefined sets of colour settings 1 Personal 2 Rich 3 Natural 4 Soft and 5 Animation PREV NEXT _ STOP PLAY PAUSE o 00 Sound mode Press AY to select a desired surround sound output 6ch Multi channel 3d 3D Sound St Stereo m O n disc mode press SYSTEM MENU gt The menu bar will appear across the top of Frame by Frame PP P The playback will pause Press lt P to select the TV screen the previous or next picture frame To resume normal playback press II TA 3 IG Slow Motion The slow motion speed will display Press lt P to select a reverse or forward slow motion speed To resume normal playback press II Scan Speeds The fast scan speed will display Press to select a reverse or forward fast scan speed O Use the joystick 4 A V on the remote to The volume will be muted To resume normal playback press II navigate in the menu gt
36. id is in step of 9 kHz and 10 kHz respectively The FM tuning grid also will be changed from 50 kHz to 100 kHz or vice versa 41 Timer Operations Setting the timer The system can switch on to DISC or TUNER mode automatically at a preset time serving as an alarm to wake you up IMPORTANT Before setting the timer ensure that the clock is set correctly The volume of the timer will increase gradually to the last tuned volume level If the last tuned volume level is too low the set will then increase to a predetermined minimum audible level buttons on front panel DVD system s display panel gt gt CLOCK TIMER SOURCE nf a I44 SEARCH PPI Ye 27m CLOCK TIMER O Press STANDBY ON to switch on the DVD system Press and hold CLOCK TIMER until Press PP if necessary to change the display to TIMER then press CLOCK TIMER again to confirm Adjust SOURCE or press DISC MEDIA or TUNER on the remote to select the wake up source DISC or TUNER Press Ha a BB to set the wake up time minutes and hours To increase the speed hold down l or gt gt The changes in minutes will rollover to the hours 42 Press CLOCK TIMER again to store the setting Once the timer is set it will always switch on unless you deactivate it gt Z icon will remain on the display panel It indicates the timer is activated O At the preset time the selected sound source w
37. ill play for 30 minutes before it switches to Eco Power standby mode if no button is being pressed within the time frame gt DISC the first track of the last selected disc will be played If the last selected disc tray is empty it will switch to the next available disc If all the disc trays are not available it will switch to Tuner mode gt TUNER the last tuned radio station will be played Activating Deactivating the timer 0 Repeat steps 0 0 of Setting the timer O Press W to turn off the timer gt 2 icon will disappear from the display panel and f FILH Ue F appears OR Press CLOCKeTIMER to turn on the timer to the last setting gt The timer information will display for a few seconds then the system resumes its last active source or stays in standby mode Note The system will exit timer setting mode if no button is pressed within 90 seconds Setting the Sleep timer The sleep timer enables the system to switch to Eco Power standby mode automatically at a preset time Press SLEEP on the remote repeatedly until it reaches the desired preset turn off time gt The selections are as follows time in minutes gt Before the system switches to Eco Power standby mode a countdown of 10 seconds is To check or change the setting Press SLEEP once to show the remaining time before switching off If you continue pressing the SLEEP button the next Sleep Timer option will appear
38. io station OK Confirms a selection DISC SKIP Selects next disc tray for playback 02 REPEAT Selects various repeat modes 3 VOICE only available in Multi channel mode Turns on off clear voice sound effect MUTE Mutes or restores the volume 25 DIM Turns on off the dim mode SLEEP Sets the sleep timer function SUB Adjusts subwoofer s sound level TV VOL Adjusts TV volume Philips TV only REPEAT A B Repeats a specific section on a disc ZOOM Enlarges a picture on the TV screen Functional Overview S 9 009 DADOV Y PHILIPS 6 DISC MENU Enters or exits disc contents menu ForVCD version 2 0 only E 8 amp 3 E 9 In stop mode turns on off playback control PBC mode During playback returns to main menu 62 SOUND Selects a sound effect 63 Numeric Keypad 0 9 Enters a track title number of the disc Enters a number of a preset radio station 8 Switches to Eco Power standby mode Switches to standby mode Press and hold the button for more than two seconds 17 Getting Started Step 1 Inserting batteries into the remote control p Open the battery compartment O Insert two batteries type R06 or AA following the indications inside the compartment
39. king To view the clock time in any active mode O Press CLOCKe TIMER gt The clock will display for a few seconds Notes If the DVD system is disconnected from the power supply it will erase the clock setting If you do not press any buttons within 90 seconds the system will exit clock setting mode Step 3 Setting the TV IMPORTANT Make sure you have completed all the necessary connections See pages 12 13 Connecting TV Adjust SOURCE control until 2 5 7 7 appears on the display panel or press DISC MEDIA on the remote Turn on the TV and set to the correct video in channel You should see the blue Philips DVD background screen on the TV gt Usually this channel is between the lowest and highest channels and may be called FRONT A V IN or VIDEO See your TV manual for more details gt Or you may go to channel 1 on your TV then press the Channel down button repeatedly until you see the Video In channel gt Or the TV remote control may have a button or switch that chooses different video modes gt Or set the TV to channel 3 or 4 if you are using an RF modulator Changing the NTSC PAL setting via the remote control Press DISC MEDIA on the remote to enter disc mode Make sure no MP3 disc is in disc tray 1 Wait until the system finishes reading the discs before proceeding to next step If playback begins press B to stop playback Press and h
40. le with a Dolby Digital decoder for example Before starting operation set the DIGITAL OUTPUT according to the audio connection See page 33 Setting the digital output Notes Some DVDs are copy protected You cannot record the disc through a VCR or digital recording device Always refer to the owner s manual of the other equipment for complete connection and usage details Functional Overview Main unit and remote control OOO Go 02 WG BW G 94 PHILIPS g STANDBY ON Switches to Eco Power standby mode or turns on the system Switches to standby mode 2 Disc trays 1 5 3 OPEN CLOSE A DISC1 5 Opens Closes the individual disc tray 4 iR SENSOR Point the remote control towards this sensor 5 Speaker display panel 6 System display panel 7 TUNING Switches between frequency tuning and preset tuning mode PROG PROGRAM DISC starts programming TUNER starts automatic manual preset programming CLOCK selects 12 or 24 hour clock display 9 gt Il PLAY PAUSE DISC starts pauses playback TUNER enters Plug amp Play mode and or starts preset radio station installation only on the main unit H STOP Exits an operation DISC stops playback or clears a programme TUNER erases a preset radio station lt lt SEARCH gt PREV NEXT DISC searches ba
41. levels for one or both speakers until the sound evens Turning on or off the sound output C Delay time settings use the longer delay settings when the surround speakers are closer to the listener than the front speakers O Press OK to confirm To remove the menu Press SYSTEM MENU Getting Started Step 5 Setting language preference You can select your preferred language settings so that this DVD system will automatically switch to the language for you whenever you load a disc If the language selected is not available on the disc the disc s default setting language will be used instead Except the DVD system s menu language it will remain once selected O In disc mode stop playback and press SYSTEM MENU O Use the joystick 4 A V on the remote to navigate in the menu O Select icon and press V Move to and press P Move to one of the following and press P Audio disc s soundtrack Subtitle disc s subtitles Menu on screen menu O Press A V to select a language and press OK Repeat steps for other settings To remove the menu Press SYSTEM MENU 21 Disc Operations 22 IMPORTANT DVD discs and players are designed with regional restrictions Before playing a disc make sure the disc is for the same zone as your player Depending on the DVD or VIDEO CD some operations may be different or restricted Do not push on the disc
42. ll O If you use 4 lt BP on the front panel for Meu a VD y replaced frequency tuning make sure the system is in q y y 8 y gt Once completed the last tuned radio frequency tuning mode If not press TUNING station will play gt REEL MOLE appears Automatic presetting You can start the automatic presetting from a Presetting radio stations selected preset number You can store up to 40 preset radio stations in the memory starting from FM and followed by MW bands DVD system s display panel DISC V AV MEDIA TUNER AUX DI 4 Notes The system will exit presetting mode if no button is pressed within 20 seconds If no stereo frequency is detected during Plug and Play HERE RIN Emr appears 40 O Press TUNER on the remote or adjust SOURCE control on a iront e to select o Press gt or use the numeric keypad 0 9 to select a preset number to begin O If you use ad BP on the front panel for preset tuning make sure the system is in ias E mode de not press TUNING gt d PERGET PLE appears O Press and hold PROGRAM ere PROG on the front panel until q PROGRESS appears gt If a radio station is stored in one of the presets the same radio station will not store under another preset number gt If no preset number is selected automatic preset will begin from preset 1 and all your former presets will be overridden Manual pr
43. ly onVideo CD 2 0 with playback control PBC feature Follow the steps of Using the setup menu and select m gt PBC eee Off Select this if you want the VCD to start playback automatically once loaded in the disc tray On Select this if you want the disc menu of the VCD if available to show on the TV screen once loaded in the disc tray DVD Menu Options Follow the steps of Using the Setup Menu and select EH gt Help text Off Select this to turn off the help text display On Select this if you want to see a brief description of the selected menu bar icon to show at the bottom of the TV screen 35 DVD Menu Options O Move to Change code and press P You can change the four digit code used for Access Control UM EET M Child lock Parental level Change country Change code O Use the numeric keypad 0 9 to enter your new four digit code Then enter the same code again to reconfirm Mos SRA TE 11 11 11 1 Confirm code O n disc mode press SYSTEM MENU O Select icon and press V O Use the joystick 4d A V on the remote to O Press SYSTEM MENU again to remove the navigate in the menu menu pw Move to gii and press P ds Move to Access Control and press gt Ci SRA E 11 11 1E 1 Enter code O Use the numeric keypad 0 9 to enter your old four digit code When doing this for the first time enter any
44. mode press SYSTEM MENU gt The menu bar will appear across the top of the TV screen O Select icon and press V to enter the 4 3 panscan uu setup menu Then press A V to select one of Select this if you have a the setup menu options and press P to conventional TV and your enter the menu DVD is not formatted gt Playback will pause for wide screen viewing l A wide picture will display on the whole TV A AX screen with a portion automatically cut off 4 3 letterbox x Picture Setup Select this if you have a S dS conventional TV and your d ound SER DVD is formatted for wide E E E COLI screen viewing Black bars G suag P appear on the upper and lower portions of the 3 Feature Setup JESCEEED 16 9 e Use the Joystick lt P A V on the remote to Select this if you have a navigate in the menu wide screen TV you must also set your wide O Press OK to confirm your selection screen TV to full size gt Playback will resume or begin automatically To remove the menu Press SYSTEM MENU NOTE Some of the features in the Setup Menu are described in Getting Started 30 DVD Menu Options Selecting a predefined colour setting Improving the image for NTSC setting This feature is only applicable if you have set This DVD system provides four predefined the TV System to NTSC setting see page sets of colour settings and one personal 19 setting
45. n movie dialog on all 5 surround channels without compromising on the location accuracy and the width of the surround sound Component Video Out Jacks Jacks on the back of the DVD System that send high quality video to a TV that has Component Video In jacks R G B Y Pb Pr etc Disc menu screen display prepared for allowing selection of images sounds subtitles multi angles etc recorded on a DVD Digital Sound that has been converted into numerical values Digital sound is available when you use the DIGITAL AUDIO OUT COAXIAL or OPTICAL jacks These jacks send audio through multiple channels instead of just two channels as analogue does Dolby Digital A surround sound system developed by Dolby Laboratories containing up to six channels of digital audio front left and right surround left and right and centre DTS Digital Theatre Systems This is a surround sound system but it is different from Dolby Digital The formats were developed by different companies MP3 A file format with a sound data compression system MP3 is the abbreviation of Motion Picture Experts Group 1 or MPEG 1 Audio Layer 3 By using MP3 format one CD R or CD RW can contain about 10 times as much data volume as a regular CD can Multichannel DVD is specified to have each sound track constitute one sound field Multichannel refers to a structure of sound tracks having three or more channels Parental level A function of the DVD to limit pl
46. old DISC MEDIA on the remote until PAL or NTSC appears on the display panel gt To change the setting repeat step O Getting Started Selecting the colour system that corresponds to your TV This DVD system is compatible with both NTSC and PAL In order for a DVD to play on this DVD system the colour system of the DVD the TV and the DVD system should match A ES SYSTEM MENU DISC MENU ore 0 0 0 e A ui nu System O n disc mode stop playback and press SYSTEM MENU O Use the joystick 4 A V on the remote to navigate in the menu O Select icon and press V Move to and press P Move to TV System and press P Auto Select this if the connected TV is compatible with both NTSC and PAL multi system The output format will be in accordance with the video signal of the disc NTSC Select this if the connected TV is NTSC system It will change the video signal of a PAL disc VCD only and output to NTSC format Set the Black level shift to On in order to improve the colour contrast and picture when you play an NTSC compatible DVD PAL Select this if the connected TV is PAL system It will change the video signal of an NTSC disc and output to PAL format Select an item and press OK To remove the menu Press SYSTEM MENU 19 Getting Started 20 Step 4 Selecting speaker layout NA DNE A SYSTEM ME DISC MENU
47. ountry Change code O Press A V to select the country for which the disc is coded then press OK O Press SYSTEM MENU again to remove the menu 39 Tuner Operations estao U the PI d Pl Make sure the FM and MW antennas SE 0E EE ay are connected Plug and Play allows you to store all available The TUNING button on the front radio stations automatically panel is used to toggle between frequency tuning and preset tuning When in preset tuning mode pressing a lt gt gt buttons on the front panel AUTO MSTA Pass PLAY will change the preset number Otherwise pressing lt lt gt gt will change the radio frequency Pil PLAY PAUSE 144 SEARCH p gt SURROUND Tuning to radio stations we O Press TUNER on the remote or adjust SOURCE control on front panel to select O Connect the system to the power supply eme Ege ue p Wo pr Ela O Press and hold a a gt gt on the remote appears oa OR until the frequency indication starts to change then release In Eco Power standby standby mode gt The next radio station will tune press and hold P I on the front panel until automatically LAA Ao LP debe PP gt CD lights up for FM stereo reception appears To tune a weak station press a a b O Press P Il on the front panel to start briefly and repeatedly until an optimal installation reception is found MM P HALA TUNER appears gt All previousl red radi ions wi
48. playback capability This function can also be accessed via the SURR button on the remote control or SURROUND on the front panel Follow the steps of Using the Setup Menu and select td gt Analog output BERE ULI Stereo 3D sound Multi channel Stereo Select this to change channel output to stereo which delivers sound from only the two front speakers and subwoofer 3D Sound Select this to change channel output to 3D sound which delivers surround sound from only the two front speakers and subwoofer Multi channel Select this to enable Multi channel output Night mode turning on off Follow the steps of Using the Setup Menu and select aq gt Night mode Mo o CE Off Select this when you want to enjoy the surround sound with its full dynamic range On Select this to level out the volume High volume outputs will be softened and low volume outputs are brought upward to an audible level This feature is only available for movies with Dolby Digital mode Status window turning on off Follow the steps of Using the Setup Menu and select BH gt Status window Mo 3 Status window E Off Select this to remove the status window from the TV screen On Select this if you want the status window to display on the TV screen It contains information on the current play state and time PBC Playback Control turning on off This feature is available on
49. sc Depending on the TV it may not be possible to change the aspect ratio Adjust the volume Replace the speaker cables Check the speaker connections and settings Disconnect the headphones Press PLAY to resume normal play mode if necessary Press the correct source button on the remote TV AV or AUX for example to choose the equipment that you want to hear through the DVD system Disconnect the power cord from the power outlet for a few minutes Reconnect the power cord and try to operate again as usual The DVD player does not start playback Cannot activate some features such as Angles Subtitles or multi language Audio There is no sound from the centre and surround speakers Radio reception is poor The remote control does not function properly The timer is not working The display panel is dark Low hum or buzz sound Troubleshooting Problem Solution Insert a readable disc with the playback side facing down Check the disc type colour system and region code Check for any scratches or smudges on the disc Press SYSTEM SETUP to turn off the setup menu screen Change the rating level Moisture has condensed inside the system Remove the disc and leave the system turned on for about an hour The features may not be available on the DVD Changing the language for the sound or subtitle is prohibited on the DVD Make sure the centre and surround speakers are connected correctl
50. sive scan video quality is only possible through Component Video Pr Pb Y output Using Component Video jacks Pr PbY Use the component video cables red blue green to connect the DVD system s Pr Pb Y jacks to the corresponding Component video input jacks or labelled as Pr Cr Pb Cb Y or YUV on the TV To hear the TV channels through this DVD system use the audio cables white red to connect TV IN L R jacks to the corresponding AUDIO OUT jacks on the TV If you are using a Progressive Scan TV TV must indicate Progressive Scan or ProScan capability set the P SCAN switch to ON Otherwise set it to OFF COMPONENT O DIGITAL S VIDEO i IMPORTANT S Video connection provides better picture quality This option must be available on your T V Using S Video jack O Use the S video cable not supplied to connect the DVD system S VIDEO OUT jack to the S Video input jack or labelled as Y C or S VHS on the TV O To hear the TV channels through this DVD system use the audio cables white red to connect TV IN L R jacks to the corresponding AUDIO OUT jacks on the TV Set the P SCAN switch to OFF _ TVsignal Connections RF coaxial cable to TV T Back of RF Modulator example only INT IN TOTV VIDEO AUDIO IN O 9 9 9 3 Antenna or Cable b SPEAKER SYSTEMS
51. st Increase the value will sharpen the picture or vice versa Choose zero 0 to balance the contrast Improving the image for Progressive Scan Video output setting not available for all versions This feature is only applicable if you have connected this DVD system to a Progressive Scan TV through the Component Video jacks see page 12 Follow the steps of Using the setup menu and select gt Digital Crystal Clear Gamma y Sharpness Chrome Delay DCDi 4 Digital Crystal Clear Press A V to adjust the values of these parametres that best suit your vision Gamma Sharpness Chrome Delay and DCDi Gamma Select this allows you to adjust the intensity of the picture non linearly A positive value allows you to bring out low level detail in dark scenes while a negative value will emphasize contrast Sharpness Select this allows you to adjust sharpness of the picture Chrome Delay Select this allows you to adjust the advance delay of the chrome signal to yield a perfectly clear picture Especially when the chrome colour and luma brightness signals are not synchronised DCDi New Directional Correlation Deinterlacing Select this will optimise the image quality significantly especially during the slow motion playback It computes and tracks the angle of edge to fill in the missing pixel on the TV screen Setting the digital output Set Digital Output according to your optional a
52. t operate the DVD system in an enclosed cabinet and allow about 10 cm 4 inches of free space all around the player for adequate ventilation PHILIPS DVD Home Cinema System Care of disc To clean a CD wipe it in a straight line from the centre towards the edge using a soft lint free cloth Do not use cleaning agent as they may damage the disc WWrite only on the printed side of a CDR W and only with a soft felt tipped pen Handle the disc by its edge do not touch the surface Care of the cabinet Use a soft cloth slightly moistened with a mild detergent solution Do not use a solution containing alcohol spirits ammonia or abrasives Finding a suitable location Place the player on a flat hard stable surface Connections Step 1 Set up the surround Step 2 Set up the front speakers speakers with the subwoofer stands mini speaker stand subwoofer stand 0 OR O Before connecting the speakers to the DVD The connections between front speakers and system firmly attach the mini speaker stands DVD system are through the twin subwoofer to the surround speakers using the supplied stands screws OR O Attach the left front speaker to the left subwoofer stand and right front speaker to the e Alternatively you can choose to mount the right subwoofer stand speakers on the wall Attach the supplied bracket firmly to the rear of speakers using the suppli
53. the surround speakers 9 Step 2 Set up the front speakers with the subwoofer stands 9 Step 3 Connecting speakers and twin subwoofer vestidas 10 Step 4 Placing the speakers and subwoofer S u T e e 11 Step 5 Connecting FM MW antennas 11 Step 6 Connecting TV sisse niis 12 Using Composite Video jack CVBS 12 Using Component Video jacks Pr Pb Y 12 Using 5 Video lada abad 13 Using an accessory RF modulator 13 Step 7 Connecting the power cord 14 Connections optional Connecting a VCR or Cable Satellite Box 15 Viewing and listening to the playback 15 Using the VCR for recording DVDs 15 Connecting digital audio equipment 15 Listening to the playback 15 Recording digital arcanos 15 Functional Overview Main unit and remote control 16 17 Control buttons available on the remote ona 17 Getting Started Step 1 Inserting batteries into the remote control usan 18 Using the remote control to operate the SYSTEM ooo ire 18 Step 2 Setting the clock uocem 18 Step 3 Setting the TV ess 19 Changing the NTSC PAL setting via the remote control assasesi etti tatis 19 Selecting the colour system that corresponds to your TV isis 19 Step 4 Selecting speaker layout 20 Changing seating control position
54. tput 34 Night mode turning on off 34 Status window turning on off 35 PBC Playback Control turning on off 35 Help text turning on off 35 Changing the password siria 36 Restricting playback by setting Parental Level uis ones etra oi ria 37 Locking Unlocking the DVD for viewing 38 Enabling Play one Play always 39 Changing the country assent tate 39 Tuner Operations Tuning to radio stations sisas ii 40 Presetting radio stations eterne 40 Using the Plug and Play sisas 40 Automatic presetting 40 41 Manual presetting sucre 41 Selecting a preset radio station 41 Deleting a preset radio station 41 Changing tuning grid eun 41 Timer Operations Setting the timer castis uai dao o MERGE 42 Activating Deactivating the timer 42 Setting the Sleep timer 43 Sound and Volume Controls Sound Control usaras 44 Selecting surround sound 44 Turning on off clear voice effect 44 Changing subwoofer volume level 44 Adjusting Bass Treble level 44 Selecting digital sound effects 44 Volume Control desierit d ton viciis 44 Other Functions Switching ONO aaa 45 Switching to active mode
55. ubwoofer volume level 6dB to 6dB Adjusting Bass Treble level The BASS low tone and TREBLE high tone features enable you to define the sound processor settings O Press BASS or TREBLE gt The level indicator appears Within five seconds use the VOLUME control to adjust the Bass or Treble level 3 to 3 gt If the volume control is not used within five seconds it will resume its normal volume control function Selecting digital sound effects Select a preset digital sound effects that matches your disc s content or that optimises the sound of the musical style you are playing Press SOUND on the remote When playing movie discs you can select CONCERT DRAMA ACTION or SCI FI When playing music discs or while in TUNER or AUX DI mode you can select ROCK DIGITAL CLASSIC or JAZZ Note For flat sound output select CONCERT or CLASSIC Volume control Adjust VOLUME control or press VOL on the remote to increase or decrease the volume level gt LIH F 1 FH is the minimum volume level and AL PFE is the maximum volume level To listen through the headphones Connect the headphones plug to the socket at the front of the DVD system gt The speakers will be muted To turn off the volume temporarily Press MUTE on the remote gt pc will continue without sound and appears gt To restore the volume press MUTE again or increase the volume le
56. udio equipment connections Follow the steps of Using the Setup Menu and select aq gt Digital output MA I Digital output AU PCM only All Off Select this to deactivate the digital output All Select this if you have connected the digital output to an optional piece of audio equipment that has a multichannel decoder PCM only Select this if the optional audio equipment is not capable of decoding multichannel audio After that proceed to Setting the PCM output Once you select PCM only the surround mode will automatically change to STEREO DVD Menu Options Set your PCM Pulse Code Modulation output only after you have set the system s Digital Output to PCM only See Setting the digital output Follow the steps of Using the Setup Menu and select d gt PCM output eee gt 48 kHz 96 kHz 1 PCM output 48 kHz Select this if the optional audio equipment is incapable of processing 96 kHz digital signal input The signal will then be converted to a standard signal with sampling rates of 48 kHz 96 kHz Select this if the optional audio equipment is capable of processing digital signal input with sampling rates of 96 kHz However if the sound output is distorted or there is no sound select 48 kHz instead 33 DVD Menu Options Setting the analogue output Set Analogue Output to match your DVD home cinema system s
57. vel Switching on off Switching to active mode Adjust the SOURCE control to select DISC 1 DISC 5 gt FM TUNER MW TUNER gt TV AV gt AUX gt DI gt DISC 1 OR Press DISC MEDIA TUNER TV AV or AUX DI on the remote Switching to Eco Power standby mode Press STANDBY ON ECO POWER button lights up gt The display screen will go blank Switching to standby mode view clock Press and hold STANDBY ON gt The clock appears While in standby mode pressing CLOCKeTIMER button will switch the system to Eco Power standby mode Dimming system s display screen Press DIM repeatedly to select different levels of brightness for the display screen Other Functions Recording to an external device O Connect the external recording device to LINE OUT or DIGITAL OUT See page 15 Connections optional O Select the source to record from your DVD system DISC TUNER TV AV or AUX and start playback if necessary gt You can only record from DISC if using DIGITAL OUT to connect the external recording device O Start recording on the external recording device Notes All the sound control features are available for selection Refer to the owner s manual of the connected equipment for details Using the remote to operate your television 3 O Press TV AV O Press 4 lt gt or use the numeric keypad
58. which you can define yourself Follow the steps of Using the setup menu Follow the steps of Using the setup menu and select and select gt Black level shift gt Color settings Black Level shift gt Off On Color settings P1 Personal 5 Animation Off Press AV to select one of the colour settings Select this to deactivate the function Personal Rich Natural Soft or Animation On Select this to improve the colour contrast and picture of the NTSC compatible DVD Adjusting the picture position on the TV Follow the steps of Using the setup menu and select gt Video shift Press lt P to adjust the horizontal position of the picture on your TV screen by scrolling the slider to the left or right 31 DVD Menu Options 32 Fine tuning the personal colour setting If you choose Personal from Colour Settings menu it will follow the settings in the Personal Color Follow the steps of Using the setup menu and select gt Personal color Saturation Brightness Contrast A lt 1 Personal color Press A V to adjust the values of these parametres that best suit your personal preference Saturation Increase the value will enhance the colour in your picture or vice versa Choose zero 0 to balance the colour Brightness Increase the value will brighten the pictureor vice versa Choose zero 0 for average setting Contra
59. y Press SURROUND button to select a correct surround sound setting Make sure the source you are playing is recorded or broadcast in surround sound DTS Dolby Digital etc If the signal is too weak adjust the antenna or connect an external antenna for better reception Increase the distance between the system and your TV or VCR Tune in to the correct frequency Place the antenna farther away from any equipment that may be causing the noise Select the source DISC or TUNER for example before pressing the function button gt de gt gt gt Reduce the distance between the remote control and the system Replace the batteries with new ones Point the remote control directly toward the IR sensor Check that the batteries are loaded correctly Set the clock correctly Press and hold CLOCK TIMER to switch on the timer Press DIM again Place the DVD system as far away as possible from electrical devices that may be causing interference 47 Specifications AMPLIFIER SECTION Output power 5400 W PMPO Stereo mode DIN 75 W 75 W RMS Surround mode 1 kHz 75 W RMS channel Frequency Response 120 Hz 20 kHz 3 dB Signal to Noise Ratio gt 65 dB CCIR Input Sensitivity AUX In 880 mV TV In 350 mV Output Sensitivity Headphone 32 Q 1000 Q Line Out 600 mV Digital In acc IEC 60958 8 IEC 61937 4ohm 1 kHz 10 THD TUNER SECTION Tuning Range FM 87 5 108 MHz MW

Philips MX5800SA/21 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents