Pelican PL-673 User's Manual
Contents
1. Warranty Card Pelican warrants to the original consumer purchaser that the product will be free from defects in materials and or workmanship for a period of 5 years from the date of purchase If a defect covered by this warranty occurs during this period Pelican at its option will repair or replace at no charge any part that Pelican determines to be defective To obtain warranty service during the warranty period send the defective product postage pre paid with a money order for 4 00 to cover the return postage and handling along with proof of purchase and the date of pur chase to PELICAN Performance you can trust 1840 East 27th Street Vernon CA90058 This warranty shall not apply if the product has been damaged by abuse misuses negligence accident modification tampering or by any other causes unrelated to defective materials and or workmanship Repair or replacement as provided under this warranty is Pelican s exclu sive prerogative ANYAPPLICABLE IMPLIED WARRANTIES INCLUD ING WARRANTIES OR MERCHANTABILITYAND FITNESS FOR APAR TICULAR PURPOSE ARE HEREBY LIMITED TO 5 YEARS FROM THE DATE OF PURCHASE AND ARE SUBJECT TO THE CONDITIONS SET FORTH IN THIS LIMITED WARRANTY IN NO EVENTSHALLPELICAN BE RESPONSIBLE FOR INCIDENTAL DAMAGES RESULTING FROM THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTIES This warranty gives you specific legal rights and you may also have other legal rights which vary from state to stat2. This protection warranty does not include the video game power supply any part relating to the CD DVD load and read mechanism internal operating system nor the cabinet of the video game system This warranty will not apply if the Pelican controller is not used as directed in the product manual enclosed For further information or help please con tact us at 800 331 3844 or on line at www pelicanperformance com 1 Product Layout Race N Play Wireless Controller SELECT START Button Button Directional Fire Buttons Left Analog Mode Button Stick Right L3 Button Ara Stick Power LED R3 Button R1 Button L1 Button R2 Button L2 Button CHANNEL Switch Antenna Slot Race N Play Wireless Receiver Unit SIGNALLED CHANNEL Switch ANALOG LED Race N Play Car Antenna Product Overview Race N Play Wireless Controller uses advanced RF technology which gives you the ability to play without the limitations of typical corded controllers while still giving you lightning fast control over your favorite game or even control the included RF car There are a few switches buttons LED s lights and features not found on your basic PlayStation 2 Controller The following is an explanation of these elements Reduced Size Race N Play Wireless was designed to maximize comfort even during extended gaming sessions Race N Play has been reduced about 10 to 15 smaller than your normal Wireless Co
3. you can leave the channel set to position 1 9 4 Make sure the Receiver channel is set to the same channel as the controller This is important if the channels don t match on both the controller and the receiver there will be no communication and the product will not function Note If you are using more than one Race N Play Wireless Controller you must use different channel settings i e the first controller and receiver are set to Channel 1 the second con troller and receiver are set to channel 2 The channel position selected on the controller and receiver have no relation to the PlayStation 2 controller ports Note If you have the Channel switch set to car you will not be able to use it with the PlayStation 2 The Controller will only control the Race N Play Car 5 Plug your new Race N Play Receiver Unit into controller port one If you already have a con troller and want to use Race N Play Wireless as a second controller make sure you have a con troller plugged into controller port one and plug the Receiver Unit into controller port two 6 Insert a game into your PlayStation 2 and turn the system on 7 The signal LED will be green when a connec tion is made between the controller and the receiver 8 You are now ready to play 11 Instructions For Race N Play Car amp Charger 1 Make sure your PlayStation 2 is turned off 2 Remove the battery lids using the supplied screw driver a
4. PELICAN Console Protec GUARANTEE Table of Contents Console Protection Guarantee 1 PIOGUCE Layout rire 2 OVEeNIEW cr rallo 5 INSUMIGHONS Forlani ia 9 Race N Play Wireless Controller 9 Race N Play Car amp Charger 12 Trouble Shooting For 15 Race N Play Wireless Controller 15 Race N Play Caf suruma teen 17 Warranty Information 18 FCC Notice Console Protection pecircan Guarantee Performance you can trust Eira el PP eid te dia GUARANTEE Pelican s Console Protection Guarantee assures you of Pelican s com mitment to quality and customer satisfaction The Protection Guarantee warrants the connection the plug port of the video game console and the plug of the Pelican controller between the controller and your video game console system i e that with the proper use of our controller see man ual we agree to replace or repair your video game system in the event that our controller directly causes damage to your game console as a result of our controller failing to perform properly Circumstances that may cause our protection guarantee to take effect might be one of the following the video game console does not acknowledge a controller which has been plugged in original controller fails to operate after using a Pelican con troller other non pad controllers fail to operate after using a Pelican Controller
5. e 18 IMPORTANT NOTICE Federal Chameleon Wireless HC eae uy FCC ID O7X CHAM1 celica FCC ID O7X CHAM2 Changes or modifications not expressly approved by the manufacturer could void the user s author ity to operate the equipment This device com plies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation PELICAWN 1840 East 27th Street Vernon CA 90058 USA http www pelicanperformance com 19 1840 East 27th Street Vernon CA 90058 USA http www pelicanperformance com Pelican and its logo are registered trademarks Sony is a registered trade mark of Sony Corp PlayStation 2 PlayStation amp PSone are registered trademarks of Sony Computer Entertainment Inc
6. nd place 2 AA batteries not includ ed into the Race N Play Wireless controller Make sure the batteries are inserted as shown in the battery compartment Remove screw with supplied screw driver 12 3 Set the Channel Switch to the Car position The switch should be all the way to the right most position 4 Connect the supplied High Performance Antenna to the Race N Play controller The antenna will screw in clock wise 5 Remove the battery lid for the Race N Play Car Charger and properly insert the batteries 6 Place the Race N Play Car on the Charger and let it charge for approximately two minutes 7 Remove the Race N Play Car from the charg er You are now ready to let the racing begin Once the battery on the Race N Play Car gets low you can just simply place it back on the charger and let it charge for another two minutes 14 Trouble Shooting For Race N Play Wireless Controller If you are having difficulties with your new Race N Play Wireless Controller please refer below The Vibration function is not working on my new Race N Play Wireless controller 1 Race N Play Wireless does not support Vibration because the controller is very compact eliminating the bulk common to other wireless controllers and was designed for maximum battery life My system turns on but don t see anything on the TV 1 Check to verify that your A V cable is properly connected to your system 2 Check to ve
7. ntrollers Power Channel Switch This switch selects the broadcast channel of the radio frequency There are four positions Off 1 2 and 3 When in the Off position the power to the Race N Play Wireless is off There is a cor responding Channel Switch on the Receiver Unit with three position 1 2 and 3 da Mode LED Analog Button Press the Analog Button to switch modes When the LED is red the controller is in analog mode and when the LED is off the controller is in digital mode The Mode LED is located on the Receiver Unit Power LED The Power LED will come on when you have the Race N Play Wireless switched into channel posi tion 1 2 or 3 Signal LED The Signal LED is green and will flicker under normal operation to show data is being trans fered Relocated L2 R2 Buttons The L2 R2 buttons have been relocated to give the user greater comfort and a much quicker reaction time than other controllers Battery Compartment Race N Play Wireless requires the use of two AA batteries There are two battery compartments on the Race N Play Wireless One battery will go in each handle Because of the battery location the vibration motors have been removed from Race N Play Wireless meaning there is no vibra tion function Double check and make sure bat teries are inserted correctly Please verify that all the batteries are inserted cor rectly If they are inserted incorrectly it may cause
8. personal injury as well as damage to your Race N Play Wireless Controller Power Save Mode When not in use the Race N Play Wireless Controller automatically turns off to conserve bat teries To turn on the Race N Play Wireless con troller you must turn the power switch to the Off position and then back to the desired channel NOTE Turn off the controller when not in use to extend your battery life Race N Play Car Race N Play Wireless comes standard with a Micro RF Car that can be controlled using your Race N Play Controller Race N Play Car Charger A quick charger is also included to charge the Race N Play car The charge time is approximat ly 2 minutes and will last for 5 minutes of racing High performance Antenna Race N Play Wireless gives you a high perform ance antenna to boost the range and perform ance of the the Race N Play Car With the use of this antenna the Race N Play Car will do about double the range of the standard Micro Cars Instructions For Race N Play Wireless Controller 1 Make sure your PlayStation 2 is turned off 2 Remove the battery lids using the supplied screw driver and place 2 AA batteries not includ ed into the Race N Play Wireless Controller Make sure the batteries are inserted as shown in the battery compartment Remove screw with supplied screw driver 3 Select a Channel for the controller You may select any channel you desire 1 2 or 3 In most cases
9. quency 2 If you have two Race N Play Wireless controllers verify that they are each set to a different channel frequency and their corresponding Receiver matches the channel frequen cy that the controller is set to If you are not using your sec ond Race N Play Wireless controller you should always make sure it is in the off position 3 Unplug the Receiver Unit and reconnect it if you are still experiencing problems This will reset the connection between the Race N Play Wireless and the Receiver 16 Trouble Shooting For Race N Play Car My Race N Play Car does not seem to operate properly or does not respond to the Race N Play Wireless Controller 1 Check to verify the the Race N Play Wireless Controller is set to the Car position on the channel switch 2 Check to verify that your batteries are inserted correctly into your Race N Play Wireless Controller Make sure you have inserted both batteries Please refer to page 12 for more details on inserting the batteries 3 Make sure you charge your Race N Play Car with the pro vided charger for at least two minutes 4 Check and verify that your batteries are inserted correct ly into your charger and recharge your Race N Play Car Please refer to page 13 for more details on inserting the batteries FE PELICAN Performance you can trust For technical questions please visit http www pelicanperformance com or call us directly at 1 800 331 3844 17
10. rify that your A V cable is properly plugged into your television set My Race N Play Wireless does not respond 1 Check to verify your Race N Play Receiver unit is firmly and properly plugged into controller port one or port two if it is for a second player 2 Check to verify that your batteries are inserted correctly Make sure both batteries are inserted Please refer to page 9 for more details on inserting the batteries 3 Check to verify that the Race N Play Wireless and the Receiver Unit are on the same channel frequency Please refer to page 8 for more details 4 If the game only functions in Analog Mode press the ana log button until the Mode LED on the Receiver turns red 5 Unplug the Receiver Unit and reconnect it if you are still experiencing problems This will reset the connection between the Chameleon Wireless and the Receiver 1 3 My Race N Play Wireless does not seem to operate properly and is losing connection with the Receiver 1 It is quite normal to have interference from other devices in your home such as cell phones cordless phones wireless networks or even microwaves Because of this Race N Play Wireless has three different channels frequencies to choose from in case there is interference on one of the channels frequencies Switch to another chan nel frequency if you are experiencing non normal opera tion or lag Please verify that the receiver is also switched to the same channel fre
Download Pdf Manuals
Related Search