Pelco ICS150 User's Manual
Contents
1. CAMCLOSURG Integrated Camera Systems from Pelco Congratulations on receiving Pelco s Camclosure Point of Sale POS Display This display is provided to demonstrate the high quality compact size and aesthetic value of Pelco s Camclosure Integrated Camera Systems Your Point of Sales Display contains 1 Pre assembled POS Countertop Wall Mount Display 1 ICS100 Series Surface Mount Dome 1 ICS150 Series In ceiling Dome Includes black and white camera with 6mm lens 1 ICS200 Series Wedge Enclosure 1 ICS300 Series Positionable Enclosure 1 Placard To place on top of demonstration monitor not included 2 Support brackets The POS display includes a pre wired standard resolution black amp white camera with 6mm lens installed in the ICS150 in ceiling dome To demonstrate the picture quality of the Camclosure Series connect the power wires to power and the video OUT connector to the video IN connector of a monitor NOTE Monitor is not included with Point of Sale Display C2427M 1 01 i 3500 Pelco Way Clovis CA 93612 5699 USA www pelco com PELLD North America amp Canada 800 289 9100 or FAX 800 289 9150 International 1 559 292 1981 or FAX 1 559 348 1120 POS SETUP The Camclosure Point of Sale POS Display can be used as a freestanding exhibit or directly mounted to a wall Freestanding Display 1 we Install the two support brackets to the back of the display refer to Figure 12. Reposition the ICS300 enclosure located on the front of the display refer to Figure 2 Loosen the locking collar at the base of the ICS300 and reposition the enclosure downward Pull wiring for power and video a Connect the video cable Monitor is not supplied b Depending on the input voltage connect either the 12 VDC or 24 VAC input power wires refer to Figure 1 Wall Mount Display The mounting surface should be capable of supporting 52 pounds we Prepare mounting surface Use a minimum of two fasteners not supplied of appropriate size to attach the display to the wall refer to Figure 1 Pull wiring for power and video a Connect the video cable Monitor is not supplied b Depending on the input voltage connect either the 12 VDC or 24 VAC input power wires refer to Figure 1 Reposition the ICS300 enclosure located on the front of the display refer to Figure 2 Loosen the locking collar at the base of the ICS300 and reposition the enclosure downward WALL MOUNT HOLE SUPPORT BRACKET WALL VIDEO POWER CONNECTIONS MOUNT BLUE WIRE 24 VAC HOLE RED WIRE 24 VAC 12 VDC BLACK WIRE GROUND Figure 1 Back View ICS300 REPOSITION DOWNWARD ICS151 MA6 CONNECT VIDEO amp POWER TO OPERATE CAMERA Figure 2 Front View
Download Pdf Manuals
Related Search