Peavey PVM 535N User's Manual
Contents
1. FEATURES Very high sensitivity and output Low noise natural vocal reproduction Improved shock mounting lowers handling noise and mic stand rumble Die cast alloy housing Rugg d construction and field serviceable for road use e Furnished accessories include external foam windscreen swivel adaptor sturdy flite type carrying case and 25 foot low Z cable Double brazed metal screen New wire mesh ultra lightweight diaphragm Improved transient response Neodymium magnetics Super off axis rejection Excellent feedback control DESCRIPTION The PVM 535N Neo Dynamic is a unidirectional cardioid dynamic microphone which relies on the latest in rare earth magnet technology to achieve maximum output sensitivity The Neodymium Iron Boron magnet provides much higher magnetic flux than traditional dynamic microphone designs resulting in an output level usually expected only from condenser microphones but without the need for batteries or external power supplies The PVM 535N has been designed with the vocal performer in mind A new lightweight diaphragm material has been employed to greatly improve transient response and vocal clarity The diaphragm material is super light but maintains its rigidity to withstand the extreme sound pressure levels of PVM 535N Unidirectional Cardioid Dynamic Microphone stage and live performances Vocalists who work the microphone c2. lose will enjoy the 535N due to its reduced proximity effect producing smooth clean low end without the typical muddiness that often occurs as the microphone is moved closer to the source The frequency response is also tailored for handheld vocal applications producing flat low end with a slight rise in the upper vocal range where sibilance is important Feedback rejection is excellent A combination of cardioid and supercardioid polar patterns have been merged to produce unmatched vocal reproduction and at the same time keep feedback to a minimum The PVM 535N exhibits a cardioid polar response in the critical vocal range and a super cardioid response in the feedback region The internal shock mount system is totally new and designed to perform to a new specification level along with the lighter weight more sensitive diaphragm Handling noise is minimized for hand held applications and the shock system is also designed to reduce the noise of removal from mic clips mic stand clunks stage rumbles etc An external foam windscreen is also supplied to provide an extra level of wind noise protection in extreme situations DIMENSIONS INCHES MILLIMETERS 47 63 2 2 50 80 i 5 146 05 3 95 25 es ARCHITECTURAL amp ENGINEERING SPECIFICATIONS The microphone shall be a moving coil dynamic with a frequency response of 40 Hz to 16 kHz The microphone shall have a cardi
3. oid polar characteristic typically 20 dB down from the front response The microphone shall have an output power level of 52 dB where 0 dB 1 milliwatt per pascal and nominal impedance of 400 ohms The microphone shall have non reflecting low gloss black Teflon based paint on a die cast alloy housing WIRING DIAGRAM and a brazed metal screen The connector shall be a 3 pin XLR equivalent audio type and a swivel adaptor shall be provided to mount on a stand having 27 thread The microphone shail have overall dimensions of 5 in length and 1 in diameter The microphone shall be a Peavey model PVM 535N Neo Dynamic or equivalent POSITIVE INWARD PRESSURE ON DIAPHRAGM PRODUCES POSITIVE VOLTAGE AT PIN 2 a 13 16 20 64 10 dB er dividon 100 Hz 200 Hz 500Hz ikHWz 2kHz 5kHz 10kHz 20kHz FREQUENCY RESPONSE 10 dB ho f oe an per division 1 100Hz 200Hz SOOHZ 1 kHz 2kHz SKHZ 1O0kHz 20kHz 0 amp 180 FREQUENCY RESPONSE Proximity effect is a naturally occurring phenomenon in unidirectional microphones The effect is to accentuate or boost the low frequency response This effect is a function of distance from the diaphragm to the source and increases as the diaphragm is moved closer to the source POLAR PATTERNS SPECIFICATIONS Element Type Dynamic Magnet Composition Neodymium Iron Bo
4. ron Polar Pattern Unidirectional Front to Back 20 dB typical Impedance 400 ohms Frequency Response 40 Hz to 16 kHz Sensitivity Output Power Level 52 dB 0 dB 1 mW 10 microbar Open Circuit Voltage 67 dB 0 dB 1 volt dyne cm2 4K 6K Case Housing Accessories Die cast zinc alloy Carrying case swivel adaptor foam Finish windscreen 20 balanced line impedance cable with 3 pin and 3 socket XLR Low gloss black p 5 equivalent audio connector Ball Screen Fe ok A gt Brazed steel mesh 10 microbars 1 pascal 10 dynes cm Pop Filter 80 ppi open cell foam polyureathane External Windscreen 80 ppi open cell foam Connector Type 3 pin XLR Phasing Positive inward pressure on diaphragm Produces positive pulse at pin 2 Weight 260 grams
Download Pdf Manuals
Related Search